test: other harmless output change These are new test that need adjustment for 4.7 output.

changelog: mention the fix of cache warming on hg strip

test: backed out output changes from changeset 6f391c2a773b

test: backed out test output changes from changeset ef22eef37ecc

test: backed out output changes from changeset 0171a7ceb574

test: backed out output changes from changeset dfa69b5ece87

test: backed out output changes from changeset 01ad46551d7c

prev: also use stack shortcut in output when possible This mirror what `hg evolve` is doing since cc3a0b13ae57.

next: also use stack shortcut in output when possible This mirror what `hg evolve` is doing since cc3a0b13ae57.

branching: merge stable into default

rewind: alias the command to undo This is a step in unifiying rewind and undo and not talk about them as different commands or concepts. If there exists rewind command, that should be an alias of undo and the vice versa. The exact implmentation detail and how the command works etc. is a different thing but there should be just one command.

changelog: add a line about the usage of s# in evolve

caches: no longer warm the cache on strip in "auto" mode Before this patch, a strip would trigger a full and blind cache load that would include the stablerange cache. In repository like Mozilla this was a bit painful. The default "auto" mode now behave has intended.

evolve: use stack alias s# in `hg evolve` msgs As repository grows revision number lose their usefulness. To make it a little better than now, after this patch we will be using short stack aliases introduced by the topic extension (as displayed by `hg stack`). These stack aliases s# will be used only when user has enabled topic extension and his repo's current active topic is same as the revs to be evolved. For now, this patch doesn't cover `continue` case. I will discuss about this with Pierre-Yves David. Maybe we have to store the info in evolvestate that "we were using stack aliases".

evolve: extract displayer to _solveone() I extracted this displayer method to _solveone() so that it would be easy to pass a different template to show evolve msgs. In upcoming patches we will be using stacktemplate in some cases where we want to include stack alias s# in evolve msgs.

utility: add a template alias that will be used in evolve msgs This template use stack alias s# instead of rev number in messages printed when we run `hg evolve`. For example, this template's msgs will look like this: move:[s3] add aaa atop:[s2] add bbb move:[s4] add ccc I will be using this template in upcoming patches.

topic: add topicidx template keyword This keyword will be useful where we want to see the index of the changeset in the stack when we run `hg stack`.

changelog: fix version number

tests: update the test-topic.t with changes in core mercurial Yuya stabilized the -T option and now it's in help by default. CORE-TEST-OUTPUT-UPDATE: 0d703063d0c8

pullbundle: fix style warning

pullbundle: improves management of multiple branch while dealing with a head There were still case where a range was issued too early.

pullbundle: deal with head in a predicable order We use node order to make this repeatable from one clone to another. This is an arbitrary pick.

pullbundle: deal with another special case introduced by arbitrary ranges previous, we dealt with the case where the tippest subrange of the stable parent was too long. Now, we need to deal with the case where it is too small.

pullbundle: compat with Mercurial 4.7

pullbundle: add some information on the cached change This also adds a way to skip "caching" smaller range in the debugcommand (not in the extensions itself).

pullbundle: add data about the cached bundle size and hit

pullbundle: add a command to generate cache hit statistic This new command should help checking that the stable range produce reusable bundle.

pullbundle: point out the output flooding issue from core Right now, we don't have a reliable progress report when using pullbundle.

pullbundle: issue local branches in the right order

pullbundle: delay cache file opening Otherwise we can end-up with a too many file open at the same time.

pullbundle: improve slicing of the lower part of range The previous method could get confuse by merge and overslice. The new method is better at using sticking on power of two boundaries.

stablerange: fix slicing of arbitrary ranges Pull bundle trigger slicing from range with arbitrary initial skip. We have to adjust the current slicing to take this into account.

pullbundle: attempt to save stablerange cache after each computation Since we do not serve the full repository, we use more stablerange starting from a random point. These are probably not loaded yet and should be cached. This is best effort caching, if we can't save them we won't.

pullbundle: add basic extension metadata

pullbundle: add a config option for the cache directory

pullbundle: add an output about the time spent slicing the set This will be useful to monitor overall performance.

pullbundle: add extension documentation

pullbundle: add an extra test showing how cache are reusable We issue a single final pull, most of its item are reusable.

pullbundle: add caching logic We now only generate a bundle once (and store it to disk). If we need it again, we use it directly from disk.

pullbundle: slice pull into multiple ranges We subdivide the set of missing revisions into multiple "range" using the "stable range" data structure. This slicing aims at maximizing the capability of the resulting ranges.

pullbundle: initial commit Right now, we do not do any slicing, but we install the wrapping and the tests.

test: update output to make streamv2 capabilities CORE-TEST-OUTPUT-UPDATE: 4bd6e444c76f

branching: merge with stable

topic: respect preexisting 'topic' value on workingcommitctx Mercurial's core changeset: 6c8ceebce309 revealed an issue. If the creator of a workingcommitctx explicitly assigned a 'topic', it was silently overridden by the current active on. This break import of patch with topic information. We now respect preexisting topic information.

topic: add a compatibility to access transaction's names The attribute was made private in 4024c363cd33.

topic: add a compatibility to access transaction's validator The attribute was made private in ebbba3ba3f66.

evovle: remove redundancy in evolve output Copying the discription of this redundancy issue given by Pierre Yves David: When running `hg evolve` to stabilize orphan changeset output about the currently stabilized changeset is issued. For example: $ hg evolve move:[3] a3 atop:[4] a2 working directory is now at 7c5649f73d11 This output can become quite repetitive when orphan are stabilized atop each other. For example: $ hg evolve --all move:[8] dansk 2! atop:[10] dansk! merging main-file-1 move:[9] dansk 3! atop:[11] dansk 2! In this case it would be smoother to issue: $ hg evolve --all move:[8] dansk 2! atop:[10] dansk! merging main-file-1 move:[9] dansk 3! Since we are moving "dansk 3!" atop the changeset we just stabilized. When adding this be careful that we still want to issue the "atop" message in various cases: 1. first changesets in a stack 2. when the orphan is not stabilized atop previous one 3. when using hg evolve --continue to resume an evolution So, I have made the changes which also respect above listed three points. And changes in tests/test-evovle*.t reflecting the changed behavior.

amend: handle crash before transaction initialization with --patch The `tr` object can be None.

branching: merge with stable

obsdiscovery: adopt to calling convention change Upstream commits 71d83b315778 and abce899c985f changed the calling convention of setdiscovery._takefullsample(). We inspect the signature of the function before calling it so we can pass the proper arguments.

branching: merge stable into default

packaging: mark as development version This avoid confusion when people install version from source.

Added tag 8.2.1 for changeset c6362c4abd69

packagin: prepare release 8.2.1

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge stable into mercurial-4.6

branching: merge stable into default

caches: issue both debug and blackbox log message This increase the odd someone looking for issue will find them.

cmdrewrite: rename variable and move it closer to where it is used Renaming to satisfy pep8-naming linter plugin, which complained on this variable because all-uppercase names are reserved for constants, and constants need to be module-level. This variable is not a good choice for moving up to the module level because it's used only in one place. Additionally, let's have it closer to the place it's actually used to potentially avoid an extra call to _() function (however cheap it may be).

changelog: mention the cache improvements

obshashrangecache: be more paranoid in the errors we catch It seems like there error were already covered. Better safe than sorry.

stablerangecache: be more paranoid in the errors we catch It seems like there error were already covered. Better safe than sorry.

stablesortcache: update the variable tracking on-disk state after write Since we updated the on disk content, we should update that value. In practice the object will likely be discarded after the write, but there is nothing wrong in being more correct.

stablesortcache: ignore permission and OS errors when writing This cache is related to the obshashrange one and we update it lazily by default. This can be an issue when pulling locally from a read only repository that was not configured for a more aggressive cache warming. The raised permission error was uncaught and could crash the whole process. Errors during cache update should not block Mercurial operations.

firstmergecache: update the variable tracking on-disk state after write Since we updated the on disk content, we should update that value. In practice the object will likely be discarded after the write, but there is nothing wrong in being more correct.

firstmergecache: ignore permission and OS errors when writing This cache is related to the obshashrange one and we update it lazily by default. This can be an issue when pulling locally from a read only repository that was not configured for a more aggressive cache warming. The raised permission error was uncaught and could crash the whole process. Errors during cache update should not block Mercurial operations.

depthcache: update the variable tracking on disk state after write Since we updated the on disk content, we should update that value. In practice the object will likely be discarded after the write, but there is nothing wrong in being more correct.

depthcache: ignore permission and OS errors when writing This cache is related to the obshashrange one and we update it lazily by default. This can be an issue when pulling locally from a read only repository that was not configured for a more aggressive cache warming. The raised permission error was uncaught and could crash the whole process. Errors during Cache update should not block Mercurial operations.

obscache: update the variable tracking on disk state after write Since we updated the on disk content, we should update that value. In practice the object will likely be discarded after the write, but there is nothing wrong in being more correct.

obscache: ignore permission and OS errors when writing In practice we always update this cache along side a new transaction, with lock taken so permission issues should not happens. However, staying on the safe side is better. Errors during Cache update should not block Mercurial operations.

obshashrange: force reset if many changes If there is many new markers (or the markers affect many changesets) resetting affected changeset can get slow. A common case for that is then changeset and markers are added in different transaction, (eg: when using clone bundle). When we detect such case, we reset the obshashrange cache, rewarming it should be faster. Here many is arbitrarily set to 10 000. The number might get adjusted.

topic: refactor revset.py slightly Checking both kind == 'literal' and topic.startswith('literal:') seems to be redundant, because of how stringutil.stringmatcher() works.

test: update output to match new `hg verify` reports CORE-TEST-OUTPUT-UPDATE: f1186c292d03

test: update output to match new "pull" phase report CORE-TEST-OUTPUT-UPDATE: 89630d0b3e23

test: adapt to change in revert messages order CORE-TEST-OUTPUT-UPDATE: cb70501d8b71

rewind: fix help text (mostly grammar, but also s/precursor/predecessor)

evolve: fix use of "'%d' % ctx" ctx has not been convertible to int since Mercurial commit 38f480502043 (context: remove basectx.__int__ (API), 2018-02-24). I decided to use "%s" instead to match other similar messages in evolvecmd.py. I also added a space to match the other messages.

stablerange: only issue the message once There is a flag to prevent issuing the long load message multiple time. However, it was never set. This is now fixed

changelog: fix version number

branching: merge back with stable

packaing: mark as development version This help avoid confusion when installing in progress work.

Added tag 8.2.0 for changeset 8d8f08245f97

branching: merge back with stable

packaging: prepare new release

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge stable into mercurial-4.6

topic: rework topic templatekw declaration to be 4.5 compatible again Mercurial prior to 4.5 does not have a requires keyword, so we need a compatibility layer.

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge stable into mercurial-4.6

branching: merge the two stable heads

test-output: backout test output update in 8fcee1e65e29

test-output: backout test output update in 503ae2689df8

topic: update the changelog with the 's#' alias change

topic: update other occurrence of 't0' is 's0' in the code

topic: mention t0 in topic documentation

stack: display 's#' instead of 't#' and 'b#' If we want people to use it, we should display it.

stack: clarify s# error message in case of branch A branch might have a lots of changeset, with all of them public.

alias: allow reference through 's#' We keep the 't#' option, but we hope to be able to deprecate it at some point. We move to 's#' because it refers to `stack` a more generic concept. than topic. In addition, this allows to phase out 'b#' that collide with normal hex-node.

topic-revset: get the list of revset through the official localrepo API This is simpler and faster. In addition we tighter the logic to be used in case of empty topic. We do not need to fall back to revision search.

topic-revset: strictly read string Making a clear distinction between string and symbol passed to topic is important when it comes to empty topic. Filtering an empty topic name is harmless. Searching a non existent revision is not.

test: search for empty topic as a string The reduce the ambiguity in the test to help with the next change.

topic: handle ambiguous arguments to topic() revset These arguments can be interpreted as either string or a revset. The decision is made based on existence of topic with such a name. This matches the behavior of branch() revset. The code needs to know all topics that ever existed in the repo, because some commands report "disappearance" of topics after certain operations, using this revset (e.g. via stack.stack or repo.revs).

topic: handle revsets passed to topic() revset This handles cases when the argument can't be interpreted as a string at all.

topic: handle string argument to topic() revset earlier

topic: prepare to handle non-string arguments to topic() revset

topic: return result early if there are no arguments to topic() revset

obshashrange: enable by default We have been testing this in various placed and specific stress test have been performed. It is time to enable this by default

obshashrange: issue a warning if the cache takes a long time to load The -current- implementation of the obshashrange cache can get slow. This will be fixed eventually, in the mean time we inform people on large repository of what have been going on. Since we are about to enable obshashrange by default, we need to make sure nobody will have an (unexplained) bad surprise.

pick: fix last references of grab in code Grab was still referenced on comments and variable names.

pick: replace `hg grab` invocation in test with `hg pick`

pick: replace "grabstate" with "pickstate"

pick: use "pick" as operation name in obsolescence markers

pick: use "pick" instead of "grab" for various internal API This should not much user visible impact but this is cleaner.

pick: update command output to mention pick instead of grab