test: adapt to change output change on default We now have a `wcache` directory in `.hg`.

safeguard: don't reimplement auto-publish if it's in core (will be in 4.9)

safeguard: the new default for auto-publish is 'publish'

stack: add a --children flag to stack If a commit in the stack has been merged outside the current topic, show a trailing status of (external-children)

extensions: avoid shadowing imported module names with exthelper methods The previous code worked, but confused pyscripter.

extensions: add fileset support to exthelper This will be tested by using it in lfs.

extensions: add uipopulate() support to exthelper

exthelper: clarify copyright and licence for the module The exthelper is quite useful and Matt Harbison is looking into having it upstreamed. We clarify the legal situation first.

packaging: merge with version 8.3.2

packaging: mark development version This help reduce the confusion when people install from source.

Added tag 8.3.2 for changeset 7edc5c148df0

packagin: prepare release 8.3.2

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge stable into mercurial-4.7

changelog: add information about the topic message improvements

branching: merge with stable

evolve: update the abort to a ProgrammingError This error should be a ProgrammingError and as Pierre-Yves David said ProgrammingError type did not existed when this code was written, so lets update this now.

topics: improve the message around topic changing The new message says 'cleared' when topic name is cleared, if we change to a new topic name, it mentions the new topic name too.

tests: fix for POSIX compliance * Mac ls will exit with a different message and exit code [1], replace with grep (which is what mercurial tests do) * POSIX echo has no -n switch, use printf instead

style: remove unused variables Both `as e` references are not used and can go.

evolve: fix a documentation typo

compat: drop 4.3 related obsfate code All the necessary piece are supported starting 4.4.

compat: drop code dealing with incompatibility for --publish with 4.3 We dropped 4.3 support.

compat: clarify when some conditional are used The middle condition was an intermediate state that never existed into a release. We can safely drop it.

compat: drop 4.3 "new troubles" report code This is supported natively for Mercurial 4.4 and above.

compat: drop 4.3 wrapping of createmarker for effect flag support This is supported natively in 4.4 and above.

compat: drop 4.3 monkey patch of `copies.mergecopies`

compat: drop 4.3 compatiblity code for `obsutil.allprecursors` function

compat: drop 4.3 compatiblity code for `ui.edit` method

compat: drop 4.3 compatiblity code for 'successors' revset

compat: drop 4.3 compatiblity code for 'precursors' revset

compat: drop Mercurial 4.3 support for exthelper The last release email noted plans to drop 4.3 and 4.4 support in the next feature release. I'd like to move this code into core, and dropping this should allow the class to be copied in unmodified.

compat: update metadata about minimum ag version

next: solve the issue of `next` get confused by split This patch solve a problem of next command which get confused by split. Let me describe how it was getting confused: Initial state of repo: A---B---C After splitting B to (B1,B2): @ A---B1---B2 \ ---B---C X * (note: C is orphan; checkedout to B1) Lets make an amend on B1: @ B1' / A---B1---B2 \ X * \ ---B---C X * Now, if run `hg next` (--evolve is True by default now): $ it would give you choice to choose from B2 and C thinking that C could also be a possbile children for B1, instead of stablizing B2 on B1. I fixed this problem by filtering those aspiring children which can be stablized on one of the aspiring children itself. Changes made in test-prev-next.t shows the changed expected behaviour.

next: add test which shows that `next` get confused by split

cleanup: avoid a Yoda condition

evolve: modify and move the comment to appropriate position

next: update the command description Now, if necessary next command evolve the next child revision by defualt. You don't need to pass the --evolve flag.

next: make next command --evolve by default Before this patch, if we need to evolve to update to the next child, we were suggesting the user to use --evolve flag. This patch make some changes to evolve by default in that conditions. After making next command to evolve by default we have to consider the following points: 1) If we don't need to evolve while updating to the next child: a) And if wdir is dirty, we suggest to use --merge flag b) if wdir is clean, we simply update to next child (if ambiguous, prompt the user to select one) 2) If we need to evolve: a) when wdir is dirty, we suggest the user to use `hg shelve` first, to make wdir clean. As we don't support --merge while evovling. b) when wdir is clean, we evolve the next cset. Changes made in test-prev-next.t reflect the changed behaviour.

safeguard: allow push to succeed (and without warning) with --publish

topic: only add --publish flag to push if it's not already there

safeguard: check auto-publish value before sending listkeys command Always sending listkeys command is just wasteful, let's first make sure users even care about auto-publish behavior.

style: silence another flak8 warning Default should be green now.

oops: backed out changeset df22f010cf24 pushed by error The changeset still fails some test

next: make next command --evolve by default Before this patch, if we need to evolve to update to the next child, we were suggesting the user to use --evolve flag. This patch make some changes to evolve by default in that conditions. After making next command to evolve by default we have to consider the following points: 1) If we don't need to evolve while updating to the next child: a) And if wdir is dirty, we suggest to use --merge flag b) if wdir is clean, we simply update to next child (if ambiguous, prompt the user to select one) 2) If we need to evolve: a) when wdir is dirty, we suggest the user to use `hg shelve` first, to make wdir clean. As we don't support --merge while evovling. b) when wdir is clean, we evolve the next cset. Changes made in test-prev-next.t reflect the changed behaviour.

next: improve the message for dirty working copy with --evolve This will be important soon when --evolve will be the default.

next: use the `hint` argument of bail if changed The argument is availabel since Mercurial 4.1. So let's use it.

prev: use the `hint` argument of bail if changed The argument is availabel since Mercurial 4.1. So let's use it.

next: explicitly specify --no-evolve in the tests The default value for this flag is about to switch.

branching: merge with stable

style: fix various flake8 warning

next: set if we need to evolve or not; also move logic to appropriate pos set the value `needevolve` and also move the logic to find aspiringchildren to appropriate position i.e before we suggest user to use other flags like --merge.

next: move some code to prepare for `next --evolve` by default Moved some values before the block where we suggest the user to use --merge flag. As we would need these values to find if we need to evolve or not before we can suggest user to use `--merge` flag. We will suggest user to use `--merge` flag only when we don't need to evolve. Because currently we don't support both --evolve(going to be True by default) and --merge at the same time.

branching: merge with stable

topic: improve UX by using pager only when we should Before this patch we were using pager in every case of topic command, either it is setting up a new topic or clearing the active topic. After this patch it will not use pager in following commands: $ hg topic [TOPIC] -r [rev] $ hg topic --clear

evolvecmd: _possibledestination() skip visiting empty parent I see that even in the case when "parent == -1" we are visiting that also and find succsets for that and in last -1 is being added in the set of possible destination. Why not skip that?

pick: `hg help` was not showing the full cmd desc of `pick` after running command `hg help` it was not including the second line of command description. I guess it picks the firstline only. So I moved that part in first line of cmd description.

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge stable into mercurial-4.7

compat: fix fixedcopytracing compatibility with mercurial 4.8 and narrow Mercurial 4.8 version of _fullcopytracing includes some new narrow code. As https://phab.mercurial-scm.org/D3896 has not yet landed, update fixedcopytracing behind a version detection condition. This was spotted by Augie Fackler.

utility: don't translate commit messages in revselection prompt (issue6016) Commit messages should not be translated and should be shown the same. I am not sure if I can add a test for this by creating a commit with non-ascii character in commit message.

evolve: use stack template in --continue case also We use stack indexes (s#) in evolve msging when revs being evolved are in active topic. Before this patch we are not covering the --continue case. So this patch cover the same and use the stack indexes s# even when we continue an interrupted evolve. In this patch I used the same concept (to check if we should use s#) as we are using in cases other than `--continue`. Thanks to PYD for refactoring those lines. Changes in tests also reflects the expected behaviour.

evolve: add test showing currently stackalias fails in --continue case

branching; merge with stable

packaging: mark version as devel version This avoid confusion from people installing from source.

Added tag 8.3.1 for changeset b90422a11a88

packaging: prepare version 8.3.1

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge stable into mercurial-4.7

evolve: do not try to display stack index of changeset who do not have one

evolve: check if we should use stack template for each item in the stack We should probably just track the current topic and move all the logic in the template itself. However, this is a good first step.

branching: merge stable back into default

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge stable into mercurial-4.7

branching: revert test outptu change for 4.7

pullbundle: drop erroneous flagging of the command as basic This is a debug command, not a basic part of the UI.

test-compat: backed out changeset ba1e83c841f2 Preparing the branch for 4.8.

test-compat: backed out changeset b0084d599112 Preparing the branch for 4.8.

test-compat: backed out changeset e2d083cc447e Preparing the branch for 4.8.

test-compat: backed out changeset ccbfbeee6cf3 Preparing the branch for 4.8.

test-compat: backed out changeset 7091f7215651 Preparing the branch for 4.8.

test-compat: backed out changeset 8eec9422bd8e Preparing the branch for 4.8.

branching: merge stable into default

branching: start test compatibility branch for Mercurial 4.7 Mercurial 4.8-rc0 have been released

topic: add the changelog argument to branchinfo() 47c03042cd1d in core added a changelog argument to revbranchcache.branchinfo() and we wrap that function in topic extension. So let's add this optional argument in topic extension too.

evolve: adapt for changed @command decorator Core changed the hacky "^command" syntax to be a proper decorator option in fa88170c10bb (help: adding a proper declaration for shortlist/basic commands (API), 2018-10-12). This patch makes evolve compatible with that.

topicidx: stop assigning index number to obsolete changesets Obsolete changeset are no longer part of the stack, the old logic tried to assigns them the index of their successors but this is flacky and error prone. So we stop doing so.

stack-index: add some test featuring content diversion This will be useful to display various issues.

pullbundle: drop erroneous flagging of the command as basic This is a debug command, not a basic part of the UI.

topic: add the changelog argument to branchinfo() 47c03042cd1d in core added a changelog argument to revbranchcache.branchinfo() and we wrap that function in topic extension. So let's add this optional argument in topic extension too.

topics: "prairie" is a not an animal (AFAIK, anyway)

tests: remove a"| head -n 2" that just hides an error code The output from core used to be longer and it made sense, but no longer does. CORE-TEST-OUTPUT-UPDATE: 5199c5b6fd29

evolve: adapt for changed @command decorator Core changed the hacky "^command" syntax to be a proper decorator option in fa88170c10bb (help: adding a proper declaration for shortlist/basic commands (API), 2018-10-12). This patch makes evolve compatible with that.

commands: adjust metavariables as appropriate Apart from looking better in hg help command, these strings are also helpful when generating shell completions programmatically.

branching: merge with default

branching: preserve the expected output on default

evolvecmd: use modern vocabulary in help text for evolve

evolvecmd: mark flags with old instability names as deprecated

packaging: mark as development version

Added tag 8.3.0 for changeset 45d4b49d81d9

packaging: prepare release 8.3.0

pullbundle: document working version and update changelog to mention it

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge stable into mercurial-4.6

topic: fix '{topicidx}' keyword registration for mercurial <= 4.5

branching: prepare release 8.3.0