test: adapt test to stable output Stable branch should pass test with mercurial stable branch.

Added tag 5.0.1 for changeset 0f3090785283

evolve: update in file version (I'll eventually -not- forget to do so)

Added tag 5.0.1 for changeset 51e1e962172c

readme: prepare for release 5.0.1

readme: update changelog

evolve: tell user which "base of divergent changeset" is not found

debugobsconvert: fix 6f08a8f6bb1d and add proper test The changeset adding deduplication (6f08a8f6bb1d) was super buggy and dropped all obsmarkers in the repo. We update the test to check this case and fix the deduplication.

merge with stable

debugobsconvert: fix a typo on "version"

debugobsconvert: also deduplicate markers in the process Various bug allowed identical or semantically identical marker to be added to the repository. So we also filter duplicates when converting.

evolve: fix capitalization in docstring for commands

test: ensure we echo prompt Tool running using the shipped 'run-tests.py' instead of the mercurial one would get different result otherwise.

debian: blacklist simple4server tests simple4server is not part of the package.

debian: blacklist test-drop drophack.py is not shipped.

debian: update control file to reflect dependency to mercurial 3.2

evolve: fix the version number The tag is 5.0.0 the content of the file was wrong.

help: fix typo in help for 'obsolete' option added to import command

test: add an explicit test for simple4server with bundle2 This makes it more likely to we catch issue with the iteration of these two.

Make next/prev only move bookmarks optionally

obsup: hack extension to make in-place upgrading of obsolete markers easy I tried upgrading my obsstore by doing a local clone as suggested by Pierre-Yves and Sean, but that caused me to end up with a ton of unstable changes that should have been marked dead. In fact, as far as I can tell, most of the performance win of that upgrade came from the fact that only about 46% (46672 of 102285) of my markers were brought over with the copy-and-pull method.

merge stable into default

evolve: fix selection of changeset to evolve from the middle of a stack (issue4434) The evolve algorithm picked a bad changesets to evolve (unstable changeset with no obsolete parent (but unstable parent). And then get confused assuming that is the first parent was not obsolete, the second should be. This changeset fixed the issue by preventing selection of direct descendant of [.] when evolving.

merge

merge back with compat branch

create a branch compatible with mercurial between 3.0.1 and 3.1.2

evolve: fix suggested commands in "parents are not common" hint The argument to 'hg rebase' is --dest, not -dest. Also, the same command should not be suggested twice -- the second option should be the rebasing the other way around.

evolve: add missing newlines in "parents are not common" hint

test-touch: add a test for rename preservation after touch This bug was recently fixed in 3.2.

evolve: fix error during iteration over bumped changesets (bug38) We are iterating over a manifest while altering it. We cannot use iteritems() in this context. we move to items, that will be an issue for very large changesets.

evolve: add various version info to save time on troubleshooting

readme: drop the mention to the wip repo The time spend in work in progress repo are fairly low nowaday.

readme: update the contribution process The inability to easily pull from pull request on bitbucket and the lack of obsolescence support there are too much pain. Patchbombed contribution are flowing so we drop the bitbucket mention in the README.

merge 5.x line into stable (drop pre hg-3.2 compat)

evolve: add the missing newline to output messages where needed

evolve: add the missing argument to a debug statement

uncommit: abort when rev specifies the current changeset The uncommit command now fails when the rev argument indicates the current changeset. Previously this aborted in the changeset obsolescence machinery when the current commit tries to obsolete itself. Using the rev argument like this indicates a misunderstanding, so printing an uncommit-specific error should make it easier to understand what went wrong.

test-amend: add a test for amend with no configured username (issue4211)

evolve: preserve branch change evolve will now preserve branch change. If the evolved changeset had a different phases than its parent, this branch name will be preserved. This allow propagation of branch change during amend but do not overwrite special branch name on children,

amend: allow the --logfile argument to work properly Though documented to work, using --logfile previously set the message option to that of the parent commit, and cause amend to abort with this message: abort: options --message and --logfile are mutually exclusive It's not clear why the 'edit' option is popped, but this option is only fetched in order to let the core commit command do the work.

Added tag 5.0.0 for changeset c13b408c0006

setup.py: bump version to 5.0.0

evolve: update tested with statement

README: update for 5.0 release

fixup previous changesets (after forgot to amend).

prune: stop reinjecting all selected revisions back into the revrange This trigger quadratic complexity for no good reason.

test: adapt to new hidden-changeset message From c1aede895072 we have a nicer error message when accessing public changesets: abort: hidden revision '6'! (use --hidden to access hidden revisions)

pullobsolete: handle migration from todosteps to donesteps This make evolve compatible with change made in Mercurial (92bf9abc4deb)

evolve: adapt to change in core rebase Mercurial core changeset 63e889cc610d (And the ones around it) changed the way graft and rebase work. We adapt to them.

test: ignore bytes lenght in message We should be storying floating point number as floating point number. So the size of the meta for fm0 format is going to be unstable. We cover them with a glob.

evolve: adapt to the new metadata storage Metadata are not stored as a "list" of (key, value) tuple instead of a binary blob. This adapt to ef880e28e56a in Mercurial.

debugobsstorestats: drop the average meta length Does not have much sense with the existence of multiple format with different meta storage. We drop it for now and will introduce and average markers length later.

debian: remove .PHONY line completely This does not work in the case of implicit pattern matching rules as used by dh. Consider this example from Geoffrey Thomas: $ ls -l total 16 -rw-r--r-- 1 faheem faheem 17 Aug 16 20:27 blue.c -rw-r--r-- 1 faheem faheem 17 Aug 16 20:27 green.c -rw-r--r-- 1 faheem faheem 35 Aug 16 20:26 Makefile -rw-r--r-- 1 faheem faheem 17 Aug 16 20:27 red.c $ cat Makefile %: %.c gcc -o $@ $< .PHONY: blue $ make red gcc -o red red.c $ make green gcc -o green green.c $ make blue make: Nothing to be done for blue'. The Make manual (http://www.gnu.org/software/make/manual/make.html#Phony-Targets) says Since it knows that phony targets do not name actual files that could be remade from other files, make skips the implicit rule search for phony targets (see Implicit Rules). Thanks to the good folks on #debian-mentors on OFTC for instruction and explanation in these matters.

debian: replace clean with override_dh_auto_clean The current version does not call the default dh_auto_build, which is a bug. This is required in particular for cleaning the build directories.

debian: replace build line with a override_dh_auto_build line This is more in line with how dh is supposed to work. In particular, dh_auto_build is functionally equivalent to the repeated "dh build --with python2 --buildsystem=python_distutils" used currently.

debian: remove clean target before implicit match rule This is redundant because it is a match-everything rule. Possibly a typo.

debian: Add DH_VERBOSE, commented out, for debugging convenience

evolve: wrap exchange.push() for compatability with core mercurial 4d52e6eb98ea

drophack: use `first` and `last` on smartset This matches the new changes in mercurial core.

evolve: use `first` and `last` on revset this match change in mercurial core. G: changed hgext/evolve.py

test: adapt to core mercurial 9ab18a912c44 This changesets improved the output of prompt during test.

evolve: adapt to core changeset 4f14303e8954 pushop.ret is now pushop.cgresult

merge with stable

evolve: update evolve merge message People are apparently unaware of --succ

import: fix the "is None" check for the Node We are checking the wrong variable.

test: remote "date" from the output of obsmarker meta Data is no longer a generic meta. it has its own field now.

test: adapt to mercurial changes Changeset 816be4ca4ae2 in core make hg config return non-zero when no value match the filter.

evolve: wrap setparents calls in begin/endparentchange Mercurial rev d259322a394b added a requirement to wrap any dirstate.setparents calls and their associated dirstate changes in begin/endparentchange.

merge with stable A couple of test fix were added on stable.

test: add glob annotations where Mercurial's run-tests.py suggests These happen to also be 5 of the 6 tests that warn about no result code when run on Windows. Probably not a coincidence. The tests previously warned about no result code whether or not it was run interactively. They only started working when test output changes were accepted in interactive mode, and these globs were added automatically.

evolve: really fix the 'grab' alias on Windows Something seems to have happened when importing cb36a4eb0157- it dropped the $@ argument to --rev, and it picked up a bunch of test changes for the obsolete sha1 replacement patch. Instead of backing it out and breaking the tests for the sha1 replacement, this just fixes the missing $@.

evolve: keep vague compatibility with 3.1 Matt Mackall work flow requires this to not crash in fire with 3.1. We apply basic bandage to stop the bleeding.

merge: all the stable sweetness into default

evolve: replace each obsolete sha1 in the description with its latest successor Obsolete csets are hidden by default and don't get pushed to the parent repo. In order to avoid broken references in commit messages, it makes sense to evolve those references to the latest and greatest successor, as each cset containing them is evolved. Of course, stale references can still occur if a commit in branch 'A' references something in branch 'B', and that something in 'B' is evolved but 'A' isn't subsequently evolved. This alleviates the user that is evolving a series of commits from having to 1) recognize that there is a hash that needs updating in any one of the series 2) look up the latest successor manually 3) hg amend -e The regular expression for matching and the logic for replacing are borrowed from the convert extension [1]. It might be nice for the output to state the reason that the reference couldn't be updated (it was pruned, split or diverged), but that may be excessive for something only displayed in verbose mode. (Maybe it should be a ui.status() instead?) [1] http://selenic.com/hg/rev/45562379ce4e

test: add parent hash to commit message in test-evolve.t This (slightly) reduces the changes to the test when hashes in the commit message are evolved in the next commit.

evolve: fix the 'grab' alias to work on Windows For some reason, the variable wasn't substituted on Windows in this case. From the test suite: $ hg grab 8 '' is not recognized as an internal or external command,\r (esc) operable program or batch file.\r (esc) This change seems hacky, but there isn't a readily available example of setting up a shell alias like this from a python module to know if there is a better way, and it seems like this is maybe just a convenience for tests, since there is no documentation for the aliases. The local copy of run-tests.py appears to predate the Windows support in the Mercurial repository's version, and fails each test with: The system cannot find the path specified. However, with this change and blacklisting test-simple4server.t, the tests can (mostly) be run on Windows like so: $ ../../hg/tests/run-tests.py --with-hg=../../hg/hg --blacklist windows Skipped test-simple4server.t: blacklisted Warned test-obsolete.t: no result code from test Warned test-tutorial.t: no result code from test Warned test-evolve.t: no result code from test Warned test-userguide.t: no result code from test Warned test-sharing.t: no result code from test Warned test-drop.t: no result code from test Failed test-prune.t: output changed # Ran 41 tests, 1 skipped, 6 warned, 1 failed.

debian: add README to the list of documents shipped with the package.

debian: add missing curl Build-Depends curl is required to run the tests.

prune: work around lazy revset slowdown Since 3.0 lazy revset is making some revset very slow. We currently work around the issue by using a simple loop instead.

readme: act that there will not be a 4.1.1 release

evolve: write a status message when the working directory changes Evolve changes the working directory during atop, etc which can confuse people as they are not aware that this happend. The ideal solution is to not have evolve change it, however mercurial limitations don't allow us to do that at the moment. So instead we are printing a status message that the working directory changed.

merge small default improvement before dropping compat with released Mercurial We are going to drop a bunch of compatibility layer.

pull: use discovery to pull less obsmarkers through bundle2 This hooks in the official API for bundle2

pull: run obsmarker discovery only on the common set If the discovery is run before the obsmarker push, pulled revs does not exist in the repository yet.

evolve: fix a typo in a long function name

bundle2: burn some more of the old code Some of it survived.

obsexch: respect todosteps when using the old push

compat: update the tests after the jump

compat: use in-core encodemarkers Now exist in core witha slightly different format.

compat: rename encodeonemarkers to _fm0encodemarkers This is getting renamed in core.

enable bundle2

drop the debug output

test-simple4server: add error output for http This is useful in case of failure.

compat: adapt to change to memctx Since core mercurial 650b5b6e75ed we must return None instead of raising IOError. Hooray for mads!!

evolve: use pushkeyescape from core It exists for all version we are compatible with.

evolve: display more message

evolve: drop a very old safe guard about bad marker The do not clean marker with nullrev successors. I assume none of them remains.

pull: drop the custom bundle2 part

obsexc: add support for evoext_pushobsmarkers_0 on localpeer This will unify the behavior of exchange in the tests.

evolve: allow read() from the magic StringIO

evolve: drop old obsmarker discovery code It as not caller anymore.

obsexc: use the common discovery We drop the hand made discovery and rely on the general one introduced some time ago.

obsexc: push nothing if push fail This is closer to the future behavior with bundle2.

discovery: hook on the official discovery for obsmarker This will let the discovery be done once and used by core.

discovery: use a different setup step for discovery This will ease the dropping of the other part later.

evolve: remove unused drop random

obshash: resist to unknown revision during discovery

code movement: gather discovery code together The discovery code is the one thing that will survive the great purge.

bundle2: drop custom compat We'll rely on the core implementation to use bundle2.

drop relevant marker compat

evolve: always use the transaction version of phase movement This drop compat with all known released version of Mercurial.

evolve: drop debugobsoleterelevant Core gained this capability usig `hg debugobsolete --rev REV`

evolve: yield to relevant markers handling in core The handling of obsolescence marker is now performed in core. If we detect a mercurial with such power we skip the wrapping from evolve. This changeset also suffer from massive diff from the change in display of obsolescence marker with parent information introduced at the same time in core.

test-wireproto: adapt to output change from core

test: update test to new date formatting in debuobsolete output The date is now a first class citizen with proper formatting.

test: update help output to future 3.2

merge with stable

pkg: make tests pass using the generated tarball Exclude tests/test-drop.t and include tests/_exc-util.sh, tests/dummyssh, and hgext/simple4server.py.

compat: always call metadata as a keyword argument Those function are gaining more arguments. using keyword argument keep use safe in all version.

test: work around a bug in debugobsolete The defautl date was wrong all along. So we use a fixed date for all tests.

merge with stable

uncommit: add a --rev argument The uncommit command now taks a --rev argument. This lets restore the file content in the current commit to another revision (instead of just is parent content). This still does not touch the working directory content.\ This allow the longly awaited: hg uncommit --hidden --rev 'precursors(.)'

readme: add missing changelog entry My dear friends changelog.

merge with stable

import: handle patch with no node information patch created by old Mercurial version or other tool have no node information. We cannot create marker in this case.

import: compare binary node with binary node when using --obsolete hex(N) != N

README: fix version number

relocate: fix typo

merge back with stable

Added tag 4.1.0 for changeset 4d5d101e878f

pkg: prepare release 4.1.0

merge default into stable Release 4.1.0 is coming

evolve: adds a --confirm option This option lets the use double check if it wants the evolve operation.

evolve: gather evolve output together We stop relying on ui.status being muted when --quiet is used. Instead we use plain write and hide this behind an explicite ui.quiet check. This will help use enforcing this output in the comming --confirm mode.

doc: forgotten amend

evolve: attempt to clarify the documentation around --all and --any This have been confusing to people. We try to be a bit more verbose in the evolve help.

evolve: re enable progress for all Progress is an important information for user facing slow push.

evolve: stop pretending we are pulling markers when we don't If discovery did not found any unknown marker, we should not display the "pulling marker" message.

evolve: do not even try to pull if all remote markers are known previously we were explicitly pulling an empty bundle.

evolve: add "obsolescence" in front of marked in the previous message

evolve: make the "X markers added" message during pull important

evolve: make the "pulling obsolescence marker" message important This is likely to take some time the user needs to know what is going on.

evolve: add "absolescence" in front of markers in the message

evolve: re-introduce the "pushing 42 markers…" message Informing the user about marker behind pushed sounds a good idea.

evolve: hide the OBSEXC message behind a config option This will lets most people ignore them while keep evolve dev having a close look at them. Some of the most useful messages will be reintroduced for all in coming changeset.

evolve: move OBSEXC progress in a dedicated function This will help use to rework them.

evolve: move OBSEXC message in a dedicated function This will help use to rework them.

merge with stable

Added tag 4.0.1 for changeset e914884fb721

evolve: prepare release 4.0.1

evolve: fix distribution for 4.0.0

evolve: update readme

evolve: update tested with statement

test: apply message changes introduced by mercurial 3.1

test: use `hg log` in the `getid` function using `hg id` to retrieve full lenght node requires to use --debug. This may include debug output (regarding branch cache invalidation for example) that breaks the test. We now use `hg log` with a custom template. This is a simple, clean and robust solution.

evolve: add a tr arguement to retractboundary Mercurial core is adding a transaction argument to its phase movement function. We do the same. If Mercurial appears to be an old version (without the extra args) we call it the old way.

relocate: add transaction around phase movement cheap way to acces access to the transaction object

uncommit tr

evolve: saner locking an transaction in `hg evolve` Each trouble solved used to handle locking and transaction on its own. We now have a top level locking and transaction. This will helps use making sure phase are moved within a transaction.

uncommit: saner locking scheme (and do it in the right order in the process)

prune: lock inside the try tss…

debugrecordpruneparents: release tr the same way than the lock Nicer code is nicer.

evolve: drop useless wlock in rewrite

divergence: actually use the hint that have been around for age Having a hint in the code is good, having it displayed is usually seens as better.

evolve: rename `tr` variable (for troubled) to `tro` tro is usually dedicated to transaction.

evolve: add a custom layer around retractboundary retract boundary is about to gain a new argument in core, we need somethign to handle this

merge with stable

evolve: point to the core mercurial tracker for bugfix As per Matt Mackall request evolution related bug should be filled again the main tracker as at some point al lof evolve wil be in core.

evolve: drop reference to 2.3 in the extension help text We are far away from 2.3 now.

readme: update the work in progress repository location

readme: update the official documentation location

evolve: deprecated --obsolete and --old-obsolete option on commit and graft Such option are unlikely to make it into core, so we deprecate them to avoid uer discovery them and getting used to them.

push: put phase in the same bundle2 than changegroup and obsmarkers Note that the usual phase push from core will be performed in all case. But the discovery should find already in sync phase at that time. The old ways sync will be properly skipped when this logic is introduced into core.

push: put obsmarkers in the same bundle2 than changeset When client is Mercurial 3.1 and server have proper evolve version and both side have bundle2 enabled, we'll includes a part containing obsolescence markers. When obsmarkers are included to the main bundle2 push, they will failed to be pushed if the changeset failed to be pushed (and reciprocally).

push: extract obsmarkers discovery in a dedicated function The need to factorise the computation of the markers to send in a dedicated function. This prepare the inclusion of obsmarkers in an atomic bundle2 push. For now, when obsmarkers are pushed using bundle2, they are still doing it on their own, in a dedicated bundle2 push.

evolve: update the tested with statement Tested with the soon to be release 3.1.

test: adapt to upstream message change A message gained parenthesis in 3.1 we reflect than in the test.

uncommit: improve error message for use with no arguments

test: use `hg log` in the `getid` function using `hg id` to retrieve full lenght node requires to use --debug. This may include debug output (regarding branch cache invalidation for example) that breaks the test. We now use `hg log` with a custom template. This is a simple, clean and robust solution.

readme: mention patchbomb usage and patch description guidelines on wiki

debian: add line to clean target to delete error files caused by failing tests

fold: improve error messages for multiple heads and roots This commit adds hints and i18n to the error messages about non-linear revisions, along with corresponding tests.

fold: reword error message for public commits This rewords the error message when attempting to fold public csets. It is somewhat clearer to not use contractions in formal writing. It also uses i18n for it. This commit also adds a new test for this error message.

fold: overhaul handling of revisions with --rev (BC) The fold command parsed the revision arguments in a very peculiar and idiosyncratic fashion: if revisions were passed without a --rev argument, then they would all be extended to ".", but if they were passed with --rev, then no extension would happen. Passing revisions both with and without --rev would abort. This is inconsistent with the way all other hg commands parse revision arguments. We have several examples of command where several revisions are passed, and the --rev option is optional for specifying those revisions (update, strip, export). This patch alters the way in which fold parses its revision arguments. No distinction is made between revisions passed with or without the --rev argument. Regardless if a single or multiple revision is specified, all will be folded together into the parent of the working directory. If the --exact argument is passed, then the parent of the working directory is ignored and the specified revisions must be a single contiguous line. The docstring and tests are modified accordingly.

fold: emit error message when folding a single revision Previously, a confusing error state would happen if the revision set to fold was a singleton.

fold: clarify message for empty revision set and abort instead (BC) I find it clearer that there are no revisions to fold because none were specified. Otherwise it seems ambiguous: maybe there are no revisions to fold because it's impossible to fold whatever was given? In analogy of other commands that are given no revisions (e.g. strip, graft), this is also now an abort instead of a mere error message, which is a BC.

evolve: do not use _ as an unused variable The _ variable is the i18n function from core Mercurial, so locally assigning to it can lead to name clashes.

merge with stable

merge with very old 2.2 branch

test-obsolete: make log templates more consistent: add {desc} to one This has the extra added benefit of making the divergence situation easier to understand.

test-obsolete: explicitly show which changesets are divergent

merge with stable

update readme (I should have a hook preventing me to push to public repo with uncommited changes)

evolve: add --tool option so we don't have to use HGMERGE

amend: add -U/--current-user option (inspired by mq)

tests: fix grammar, spelling, punctuation in comments

evolve: minor reorganisation of code responsible for evolve output This does not change any of the semantic as status is not printed when --quiet is provided. This juste make it more explicit that the output are related.

template: add a troubles keyword This keyword list all evolution troubles that affect a changeset. Evolution troubles can be "unstable", "divergent" and "bumped".

docs: update copyright statement used by sphinx

docs: add concepts guide (the set theory behind obsolescence)

docs: add guide to sharing mutable history

docs: add new user guide This has also been reviewed to death on evolve-testers. There are still a couple of short sections to write (clearly marked "TODO"), and one example to add. But (if I may be so bold) this is a gigantic improvement over the current docs, so it really should get merged. Incidentally, the figures are all SVG files created with Inkscape. They're not perfect, but they're pretty nice. Anyone who knows a better way to create technical diagrams is welcome to contribute. One wart: there's a test script that accompanies the document and largely duplicates it, but I haven't unified them. I've been concentrating on writing the best possible content, not on fiddling with tools. I suspect that unifying them will be non-trivial, but definitely worth doing.

docs: rewrite index page (including dangling links to future docs) This has been reviewed to death on the evolve-testers mailing list. I've made some minor tweaks since the last round of reviews, but the main content is the same.

amend: add -D/--current-date option, just like mq's qrefresh has Carefully designed so we can easily add -D to other changeset-creating commands (probably anything that takes -d), and so that we can add -U/--current-user as well. When that's done, the date and user options should be very similar to those in MQ.

amend: explicitly test -d option

amend: in tests, do not rely on defaults -- always use explicit -d Having a default -d option will make it hard to test -D/--current-date, which is coming shortly: presence of -d overrides -D, just like with mq's qrefresh.

evolve: fix createmarkers() wrapper to accept an iterable Docstring in mercurial.obsolete says "<relations> must be an iterable of ...", and hgsubversion takes it at its word and passes a generator. Until around Mercurial 3.0, this did not cause any problems, but now it does: in a repo with both evolve and hgsubversion enabled, pushing to Subversion when obsolete changesets are present causes a crash: [...] File "/home/gward/src/hgsubversion/hgsubversion/wrappers.py", line 346, in push obsolete.createmarkers(repo, relations) File "/home/gward/src/hg-stable/mercurial/extensions.py", line 196, in wrap return wrapper(origfn, *args, **kwargs) File "/home/gward/src/hg-evolve/hgext/evolve.py", line 332, in _createmarkers relations[idx] = (prec, sucs, meta) TypeError: 'generator' object does not support item assignment Since hgsubersion is playing by the documented rules, evolve must be the guilty party here.

merge with 4.0.0

Added tag 4.0.0 for changeset 0304fc2bab15

pkg: prepare release of version 4.0.0

pkg: drop pushexperiment from the install list

merge stable into default default is meant to be a superset of stable

merge default in to stable evolve 4.0.0 is coming.

merge back into stable The 2,7 is meant to be a subset of stable.

prepare a branch for compatibility with mercurial 2.7 to 3.0(.0) Evolve 4.0.0 is coming

test: update to output change introduced by future 3.1

simple4server: backport the bundle2 exchange

evolve: install progress support for the bundle2 pull path The custom wireprotocol command had a trick to display progress while pulling. We reinstall such logic for the new path using bundle2. Its notable that we are using the bundle2 advisory parameter for this purpose.

evolve: install progress support for the bundle2 push path The custom wireprotocol command had a trick to display progress while pushing. We reinstall such logic for the new path using bundle2.

evolve: add a pull path using bundle2 Instead of using a dedicated wireprotocol commands, we use bundle2 to transmit an obs marker parts. This aims at both testing bundle2 more and to limit the amount of special code we needs to put in simple for server to fit our needs. The massive test changes comes from the fact we can use this fast path for both remote and local push.

evolve: advertise obsmarker creation in the transation hook This will let extensions hooks on marker exchange.

evolve: add bytes and new marker data when processing part This will helps use to keep printing useful message when pulling through bundle2.

evolve: add a push pass using bundle2 Instead of using a dedicated wireprotocol commands, we use bundle2 to transmit an obs marker parts. This aims at both testing bundle2 more and to limit the amount of special code we needs to put in simple for server to fit our needs. The massive test changes comes from the fact we can use this fast path for both remote and local push.

evolve: make exchange output compact in the old pushkey case too.

evolve: compatibility with memfilectx change The future 3.1 have have more sophisticated memfilectx object. We add a compatibility layer for them.

evolve: abstract access to context.memfilectx This class is getting altered in the future Mercurial 3.1.0. This changeset prepare a compatibility layer.

import: drop version check for ``import --obsolete`` This code base does not support anything below mercurial-3.0 anyway.

evolve: bump requirement to 3.0.1 Use of bundle2 for pulling will require this version or above.

test: fix test-import condition The help text is ``"only(`` not `` only(``

merge with stable

evolve: make most line lenghts 80 characters or less There are still a few lines that are above 80 characters in length. Those have not been changed because doing so would make the code a bit less clear.

evolve: start all util.Abort messages with lower case

evolve: improve wording of a few of messages

evolve: fix a couple of typos

evolve: fix spelling error

evolve: more compact output in the wire protocol case We made the wording more similar and use less line. The writing operation is usually fast so we do not needs a specific line for it.

evolve: test exchange through wireprotocol The wireprotocol version of the exchange was only tested in the `simple4server.py` case.

evolve: align working during obsmarker push using pushkey lets use the same wording everywhere to prevent user confusion.

evolve: drop some pre-3.0 compatibility code This extension already requires Mercurial 3.0

evolve: update the errors message to request mercurial 3.0 and above And update the checking code too. This extension already requires 3.0 for some time.

readme: remove some duplicated entries Those changes where backported to 3.3.2.

readme: remove embarrassment There were… conflict marker in this file. Its over, they are gone now.

merge with 3.3.2

Added tag 3.3.2 for changeset a03ea39aca2a

prepare release 3.3.2

fold: add squash as a possible alias In order to respect the habituation of the majority of DVCS users and to make this feature more easily discoverable, the very common "squash" terminology should be added as a synonym to "fold". Since git does not have a squash command, this should be safe.

fold: add --message and --logfile options Like other commit-creating commands, this add two options for specifying the resulting commit message, with tests. If either of these options is specified, no editor is popped up asking for a commit message.

merge with stable

prune: update to successor rather than parent when prune '.'

import: --obsolete flag for automatic obsolescence marker creation A new `--obsolete` flag is added to import. When present, the new node will be marked as a successors of the one specified in the `Node` field of the imported patch. No marker are created when revision have the node expected in the patch. This improves email based work flow where implicit rebase are likely to happen and extra information are lost, changing the hash. This new behavior requires a flags, otherwise the `hg export x | hg import -` idiom would change, turning the source obsolete. (Changing from `hg graft x` to `hg rebase --dest . --rev x`) This change only takes effect when using Mercurial 3.0 and above

merge with all other change to 3.3

update 3.3.0 readme to include minimal mercurial requirement This clarify the situation.

evolve: fix grammar in a comment

README: document how to run the tests

uncommit: change 'kill' to 'prune' in error message 'kill' was renamed to 'prune' Long time ago.

readme: the forgotten update strike again