Wed, 26 Sep 2018 17:17:11 +0200 pullbundle: deal with another special case introduced by arbitrary ranges
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 26 Sep 2018 17:17:11 +0200] rev 4146
pullbundle: deal with another special case introduced by arbitrary ranges previous, we dealt with the case where the tippest subrange of the stable parent was too long. Now, we need to deal with the case where it is too small.
Wed, 26 Sep 2018 13:15:40 +0200 pullbundle: compat with Mercurial 4.7
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 26 Sep 2018 13:15:40 +0200] rev 4145
pullbundle: compat with Mercurial 4.7
Tue, 25 Sep 2018 19:35:33 +0200 pullbundle: add some information on the cached change
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 25 Sep 2018 19:35:33 +0200] rev 4144
pullbundle: add some information on the cached change This also adds a way to skip "caching" smaller range in the debugcommand (not in the extensions itself).
Tue, 25 Sep 2018 18:41:51 +0200 pullbundle: add data about the cached bundle size and hit
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 25 Sep 2018 18:41:51 +0200] rev 4143
pullbundle: add data about the cached bundle size and hit
Tue, 25 Sep 2018 18:23:46 +0200 pullbundle: add a command to generate cache hit statistic
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 25 Sep 2018 18:23:46 +0200] rev 4142
pullbundle: add a command to generate cache hit statistic This new command should help checking that the stable range produce reusable bundle.
Tue, 25 Sep 2018 13:44:32 +0200 pullbundle: point out the output flooding issue from core
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 25 Sep 2018 13:44:32 +0200] rev 4141
pullbundle: point out the output flooding issue from core Right now, we don't have a reliable progress report when using pullbundle.
Tue, 25 Sep 2018 13:29:49 +0200 pullbundle: issue local branches in the right order
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 25 Sep 2018 13:29:49 +0200] rev 4140
pullbundle: issue local branches in the right order
Tue, 25 Sep 2018 12:53:34 +0200 pullbundle: delay cache file opening
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 25 Sep 2018 12:53:34 +0200] rev 4139
pullbundle: delay cache file opening Otherwise we can end-up with a too many file open at the same time.
Tue, 25 Sep 2018 12:20:26 +0200 pullbundle: improve slicing of the lower part of range
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 25 Sep 2018 12:20:26 +0200] rev 4138
pullbundle: improve slicing of the lower part of range The previous method could get confuse by merge and overslice. The new method is better at using sticking on power of two boundaries.
Tue, 25 Sep 2018 12:19:41 +0200 stablerange: fix slicing of arbitrary ranges
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 25 Sep 2018 12:19:41 +0200] rev 4137
stablerange: fix slicing of arbitrary ranges Pull bundle trigger slicing from range with arbitrary initial skip. We have to adjust the current slicing to take this into account.
Mon, 24 Sep 2018 01:16:00 +0200 pullbundle: attempt to save stablerange cache after each computation
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Sep 2018 01:16:00 +0200] rev 4136
pullbundle: attempt to save stablerange cache after each computation Since we do not serve the full repository, we use more stablerange starting from a random point. These are probably not loaded yet and should be cached. This is best effort caching, if we can't save them we won't.
Mon, 24 Sep 2018 00:51:39 +0200 pullbundle: add basic extension metadata
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Sep 2018 00:51:39 +0200] rev 4135
pullbundle: add basic extension metadata
Mon, 24 Sep 2018 00:28:10 +0200 pullbundle: add a config option for the cache directory
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Sep 2018 00:28:10 +0200] rev 4134
pullbundle: add a config option for the cache directory
Sun, 23 Sep 2018 22:58:11 +0200 pullbundle: add an output about the time spent slicing the set
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 23 Sep 2018 22:58:11 +0200] rev 4133
pullbundle: add an output about the time spent slicing the set This will be useful to monitor overall performance.
Sun, 23 Sep 2018 22:45:23 +0200 pullbundle: add extension documentation
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 23 Sep 2018 22:45:23 +0200] rev 4132
pullbundle: add extension documentation
Sun, 23 Sep 2018 23:46:49 +0200 pullbundle: add an extra test showing how cache are reusable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 23 Sep 2018 23:46:49 +0200] rev 4131
pullbundle: add an extra test showing how cache are reusable We issue a single final pull, most of its item are reusable.
Sun, 23 Sep 2018 00:08:02 +0200 pullbundle: add caching logic
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 23 Sep 2018 00:08:02 +0200] rev 4130
pullbundle: add caching logic We now only generate a bundle once (and store it to disk). If we need it again, we use it directly from disk.
Sun, 23 Sep 2018 23:41:08 +0200 pullbundle: slice pull into multiple ranges
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 23 Sep 2018 23:41:08 +0200] rev 4129
pullbundle: slice pull into multiple ranges We subdivide the set of missing revisions into multiple "range" using the "stable range" data structure. This slicing aims at maximizing the capability of the resulting ranges.
Sun, 23 Sep 2018 23:53:23 +0200 pullbundle: initial commit
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 23 Sep 2018 23:53:23 +0200] rev 4128
pullbundle: initial commit Right now, we do not do any slicing, but we install the wrapping and the tests.
Fri, 21 Sep 2018 20:02:03 +0200 test: update output to make streamv2 capabilities
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Sep 2018 20:02:03 +0200] rev 4127
test: update output to make streamv2 capabilities CORE-TEST-OUTPUT-UPDATE: 4bd6e444c76f
Fri, 21 Sep 2018 18:33:55 +0200 branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Sep 2018 18:33:55 +0200] rev 4126
branching: merge with stable
Sat, 22 Sep 2018 13:09:06 +0200 topic: respect preexisting 'topic' value on workingcommitctx stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 22 Sep 2018 13:09:06 +0200] rev 4125
topic: respect preexisting 'topic' value on workingcommitctx Mercurial's core changeset: 6c8ceebce309 revealed an issue. If the creator of a workingcommitctx explicitly assigned a 'topic', it was silently overridden by the current active on. This break import of patch with topic information. We now respect preexisting topic information.
Fri, 21 Sep 2018 19:49:28 +0200 topic: add a compatibility to access transaction's names stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Sep 2018 19:49:28 +0200] rev 4124
topic: add a compatibility to access transaction's names The attribute was made private in 4024c363cd33.
Fri, 21 Sep 2018 17:50:28 +0200 topic: add a compatibility to access transaction's validator stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Sep 2018 17:50:28 +0200] rev 4123
topic: add a compatibility to access transaction's validator The attribute was made private in ebbba3ba3f66.
Fri, 21 Sep 2018 15:52:53 +0530 evovle: remove redundancy in evolve output
Sushil khanchi <sushilkhanchi97@gmail.com> [Fri, 21 Sep 2018 15:52:53 +0530] rev 4122
evovle: remove redundancy in evolve output Copying the discription of this redundancy issue given by Pierre Yves David: When running `hg evolve` to stabilize orphan changeset output about the currently stabilized changeset is issued. For example: $ hg evolve move:[3] a3 atop:[4] a2 working directory is now at 7c5649f73d11 This output can become quite repetitive when orphan are stabilized atop each other. For example: $ hg evolve --all move:[8] dansk 2! atop:[10] dansk! merging main-file-1 move:[9] dansk 3! atop:[11] dansk 2! In this case it would be smoother to issue: $ hg evolve --all move:[8] dansk 2! atop:[10] dansk! merging main-file-1 move:[9] dansk 3! Since we are moving "dansk 3!" atop the changeset we just stabilized. When adding this be careful that we still want to issue the "atop" message in various cases: 1. first changesets in a stack 2. when the orphan is not stabilized atop previous one 3. when using hg evolve --continue to resume an evolution So, I have made the changes which also respect above listed three points. And changes in tests/test-evovle*.t reflecting the changed behavior.
Fri, 21 Sep 2018 11:58:42 +0200 amend: handle crash before transaction initialization with --patch stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Sep 2018 11:58:42 +0200] rev 4121
amend: handle crash before transaction initialization with --patch The `tr` object can be None.
Tue, 18 Sep 2018 02:14:10 +0200 branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 18 Sep 2018 02:14:10 +0200] rev 4120
branching: merge with stable
Mon, 17 Sep 2018 09:25:28 -0700 obsdiscovery: adopt to calling convention change stable
Gregory Szorc <gregory.szorc@gmail.com> [Mon, 17 Sep 2018 09:25:28 -0700] rev 4119
obsdiscovery: adopt to calling convention change Upstream commits 71d83b315778 and abce899c985f changed the calling convention of setdiscovery._takefullsample(). We inspect the signature of the function before calling it so we can pass the proper arguments.
Fri, 14 Sep 2018 12:21:32 +0200 branching: merge stable into default
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 14 Sep 2018 12:21:32 +0200] rev 4118
branching: merge stable into default
Fri, 14 Sep 2018 12:18:22 +0200 packaging: mark as development version stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 14 Sep 2018 12:18:22 +0200] rev 4117
packaging: mark as development version This avoid confusion when people install version from source.
(0) -3000 -1000 -300 -100 -50 -30 +30 +50 +100 +300 +1000 tip