evolve: fix a couple of typos

evolve: fix spelling error

evolve: more compact output in the wire protocol case We made the wording more similar and use less line. The writing operation is usually fast so we do not needs a specific line for it.

evolve: test exchange through wireprotocol The wireprotocol version of the exchange was only tested in the `simple4server.py` case.

evolve: align working during obsmarker push using pushkey lets use the same wording everywhere to prevent user confusion.

evolve: drop some pre-3.0 compatibility code This extension already requires Mercurial 3.0

evolve: update the errors message to request mercurial 3.0 and above And update the checking code too. This extension already requires 3.0 for some time.

readme: remove some duplicated entries Those changes where backported to 3.3.2.

readme: remove embarrassment There were… conflict marker in this file. Its over, they are gone now.

merge with 3.3.2

Added tag 3.3.2 for changeset a03ea39aca2a

prepare release 3.3.2

fold: add squash as a possible alias In order to respect the habituation of the majority of DVCS users and to make this feature more easily discoverable, the very common "squash" terminology should be added as a synonym to "fold". Since git does not have a squash command, this should be safe.

fold: add --message and --logfile options Like other commit-creating commands, this add two options for specifying the resulting commit message, with tests. If either of these options is specified, no editor is popped up asking for a commit message.

merge with stable

prune: update to successor rather than parent when prune '.'

import: --obsolete flag for automatic obsolescence marker creation A new `--obsolete` flag is added to import. When present, the new node will be marked as a successors of the one specified in the `Node` field of the imported patch. No marker are created when revision have the node expected in the patch. This improves email based work flow where implicit rebase are likely to happen and extra information are lost, changing the hash. This new behavior requires a flags, otherwise the `hg export x | hg import -` idiom would change, turning the source obsolete. (Changing from `hg graft x` to `hg rebase --dest . --rev x`) This change only takes effect when using Mercurial 3.0 and above

merge with all other change to 3.3

update 3.3.0 readme to include minimal mercurial requirement This clarify the situation.

evolve: fix grammar in a comment

README: document how to run the tests

uncommit: change 'kill' to 'prune' in error message 'kill' was renamed to 'prune' Long time ago.

readme: the forgotten update strike again

evolve: protect call to rebase within a wlock (#42, #35, #16) Without a wlock, repo.commit would blow away the dirstate's parents on OSes that have no 'os.symlink' support in python, leading evolve to produce a merge instead of a rebase. If a user ran the rebase command instead of evolve, then things would work because rebase is wrapped in a giant wlock. Unfortunately, we can't use the same idea of wrapping the evolve command in one giant wlock because that's too early in the process. If the lock did wrap the entire evolve command, then the working directory would save its current parents which, since rebase hasn't been called yet, would be just p1. Therefore, we need to obtain the lock *after* the dirstate's parents are changed but *before* the call to rebase. This way ensures that when a conflict happens the working directory correctly shows both parent changeset.

readme: update the readme with all missing entry One days one will stop forgetting to update it.

readme: rephrase the changelog entry regarding the new exchange Lets try to have it readable by human being.

readme: drop the reference to fastobs Its dead Jim.

merge with stable

Added tag 3.3.1 for changeset fc04758ea9f5

prepare release 3.3.1

fix maintainer email I'm not working at Logilab since july 2013. Using my personal address to prevent this kind of situation in the future.

fold: enable --date and --user options Like all other commit-creating commits, `hg fold` should also have these options enabled. This also allows getting consistent hashes during tests involving fold.

evolve: improves readme wording (yes I just pushed the other version…)

evolve: update changelog in README

test: update testing statement

evolve: abort when trying to move a node on top of itself This provides a clearer error message when evolve misstakenly tries to move a changeset on top of itself. Before we got an abort with a cryptic message about trying to rebase a merge changeset. A proper fix to make sure that evolve never tries to move a node on top of itself will come in later patches.

run-tests: add executable bit

rewrite: use cmdutil.logmessage instead of ad-hoc methods The logic for handling the --message and --logfile options is already in core hg in the cmdutil.logmessage function. This patch removes this duplicate logic from Evolve and just calls the core function.

fold: enable --date and --user options Like all other commit-creating commits, `hg fold` should also have these options enabled. This also allows getting consistent hashes during tests involving fold.

merge with stable

test: sort output of listkey command The pushkey namespace came as dict key. So they have no defined order. We sort them to stabilize the test.

exchange: use fixed order for obstore content The obsstore content seems unstable from one version of python to another (we most certainly use some dict) we fix the order once and for all.

Finish killing fastobs (this test failed loudly after 33fdaec24432)

Kill fastobs, as marmoute says it causes problems

tests: fix test-prune.t breakage test-prune.t was broken due to 91d28bd0e04e in upstream Mercurial, which made hidden commits visible when a local tag made the commit reachable. The fix is to delete the tag in the test.

Fix preservation of rename information on evolve (#33) Following what rebase itself does, call duplicatecopies between rebasenode and concludenode. Should fix https://bitbucket.org/marmoute/mutable-history/issue/33/evolve-command-loses-copy-metadata

merge stable into default

tests: fix test-prune.t breakage test-prune.t was broken due to 91d28bd0e04e in upstream Mercurial, which made hidden commits visible when a local tag made the commit reachable. The fix is to delete the tag in the test.

evolve: small white space change

evolve: use new api _callcompressable This changeset makes evolve compatible with the change introduced in 167047ba3cfa

evolve: downcase first word in module doc This makes the output of hg help consistent with the other extensions.

evolve: deprecate gup and gdown aliases This is done in an effort to clean up the UI of evolve.

evolve: add function to deprecate an alias When cleaning up the UI for evolve we will deprecate old aliases, but still want them to work for a while. This is a helper function that will be called during the extension setup and has the ability map an old alias to a new or canonical one.

evolve: downcase first word in module doc This makes the output of hg help consistent with the other extensions.

evolve: active bookmark should move when using prev/next (#37) The #37 references the bitbucket issue for mutable-history, that can be found here: https://bitbucket.org/marmoute/mutable-history/issue/37/

commands: small language fixes in help

evolve: abort when trying to move a node on top of itself This provides a clearer error message when evolve misstakenly tries to move a changeset on top of itself. Before we got an abort with a cryptic message about trying to rebase a merge changeset. A proper fix to make sure that evolve never tries to move a node on top of itself will come in later patches.

run-tests: add executable bit

evolve: add a hook related to the new pushobsmarkers command Before the current expericment, people could hook on obsolescence marker push using pushkey. We add a new hook to serve the same purpose.

exchange: dropping dead code (issue36) This variable does not exist anywhere else in the code.

evolve: fix evolve with mercurial default MODERNCAPS have been renamed to moderncaps upstream.

simple4server: update tests Forgot to amend before pushing.

sinmple4server: advertise new cap only when advertising obsolescence This is more consistent.

evolve: do not exchange obsolescence markers when server refuse it The server can be configured to refuse obsolescence markers exchange. See changeset 48804a8d7472 for details about it. We respect server will in the client.

simple4server: option to advertise obsolescence support We had an option to control the advertising of the obsolescence markers support from the server. The goal of this option is to allow large scale repo hosting service to control the use of obsolescence markers exchange.

export: add test for simple4server We now officially test it over http

exchange: fix push markers over wire protocol for http peer Http actually interpret the data passed to _callpush expecting them to a bundle. Interpretation of a markers stream as a bundle obviously led to crash.

exchange: expose length of pushed markers http wireprotocol will need it.

simple4server: update "from <changeset>" statement Could obviously not do it in the same changeset than the original changes.

exchange: fix changeset pulling over http http compress its stream. The were building a bogus stream where the first 10 bytes where uncompressed. Confusing the client.

simple4server: update "from <changeset>" statement Could obviously not do it in the same changeset than the original changes.

exchange: properly wrap wireprotocol capabilities Just wrapping the module function only works for ssh. Ssh gets capability through the `hello` command. We also need to wrap the function stored in the command dict. This fix discovery for http peer.

simple4server: add origin and documentation to most function

evolve: add 2.9.1 compatibility seal to simple4server

simple4server: fix a missing import

evolve: update version compatibility error message

exchange: fix pull over wire protocol Actually hand pulled obsolescence markers to the pull logic. In the wire protocol case we did not reset the position of the file pointer after writing the pulled data. This lead the pull logic to thing that no markers were send at all. This changeset fix this client side bug. (apparently no test check both markers pulling and wireprotocol)

exchange: enforce permission on new wireprotocol command hgweb needs an explicit declaration of the permission level of each commands.

merge stable

evolve: fix typos in uncommit docstring

simple4server: add the wireproto command for obsolescence markers discovery This come with its usual train of duplicated utility.

discovery: use the discovery process for pull Wow! Such speed! Much functional! Very proof on concept implementation!

discovery: implement a discovery process and use it for push Much faster! So functional! Very proof on concept implementation! Wow!

discovery: first version of the "hash tree" idea We build a hash for each node based on the markers that applies to it and the hash of its parent. This will allow a kind of discovery process for markers.

evolve: update changelog with recent advance

merged 3.3 release into default Some of the default content was released in 3.3.0 the other ones are moved to 3.4

Added tag 3.3.0 for changeset 83882f2fbecb

prepare 3.3.0 release

evolve: drop `latercomer` and `conflicting` compatibility. Those old alias are deprecated for a long time now. All computations related to troubles are in Mercurial core for multiple versions.

evolve: use flag value from core for bumped fix This flag is available from core for a long time, lets use it directly from there. This commit intend to cleanup old stuff from the evolve extention.

test: get rid of all reference to conflicting changesets They are now called divergent for a long time.

merge various improvement to stable We want a good stable state before starting massive changes in default for obsolescence marker update.

exchange: add progress bar when pushing using wire protocol command Progress bar on pull was only available for pushkey based push before this changeset. This implementation is very hacky but we are still at a proof of concept stage for those new exchange method.

exchange: add progress bar when pulling using wire protocol command progress bar on pull was only available for pushkey based pull before this changeset.

exchange: fix pulling from simple for server There is far too much code duplication down there.

exchange: add test case for D.4

exchange: add test case for D.3

exchange: add test case for D.2

exchange: add test case for D.1

exchange: add test case for C.4

exchange: add test case for C.3

exchange: add test case for C.2

exchange: add test case for C.1

exchange: add test case for B.7

exchange: add test case for B.6

exchange: add test case for B.5

exchange: add test case for B.4

exchange: add test case for B.3

exchange: add test case for B.2

exchange: add test case for B.1

exchange: add test case for A.7

exchange: add test case for A.6

exchange: add test case for A.5

exchange: add test case for A.4

exchange: add test case for A.3 Allow arbitrary arguments to dotest. This allow to push --force when the push creates more heads.

exchange: automate the testing process too we now have: dotest TESTNAME [TARGETNODE]

exchange: have a function doing all the common initial setup This will help creation of further test.

exchance: add a common setup script for all test

exchange: add test case for A.2 Testcase defined here: http://mercurial.selenic.com/wiki/ObsolescenceMarkersExchange

exchange: add test case for A.1 Testcase defined here: http://mercurial.selenic.com/wiki/ObsolescenceMarkersExchange