Thu, 22 Jun 2017 09:46:30 +0200 topic-revset: changectx creation in the revset
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Jun 2017 09:46:30 +0200] rev 2650
topic-revset: changectx creation in the revset The current mutability filter is very expensive, we use a more direct and efficent way to do so: Before: ! wall 0.213261 comb 0.210000 user 0.210000 sys 0.000000 (best of 45) After: ! wall 0.012195 comb 0.020000 user 0.020000 sys 0.000000 (best of 217)
Wed, 21 Jun 2017 07:32:11 +0530 topics: add some noise to rewrittent changeset to prevent hash cycle
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 21 Jun 2017 07:32:11 +0530] rev 2649
topics: add some noise to rewrittent changeset to prevent hash cycle If we have a changeset with topic `x`, we change it's topic to `y`, fine. When we change it's topic back again to `x`, we get the hash of the the obsoleted changeset which had the topic `x` initially. The same happens for few more cases like clearing the topic of a changeset which initially had no topic. This approach is influenced from cmdutil.amend and other commands (rebase, histedit, etc…)
Wed, 21 Jun 2017 13:18:47 +0200 topic-change: update the working copy along when changing topic of '.'
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Jun 2017 13:18:47 +0200] rev 2648
topic-change: update the working copy along when changing topic of '.' This avoids leaving the working copy behind, removing another large parts of issue5441.
Wed, 21 Jun 2017 13:21:08 +0200 topic-change: cleanup the locking and transaction mechanism
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Jun 2017 13:21:08 +0200] rev 2647
topic-change: cleanup the locking and transaction mechanism The previous code did not garanted we would release all lock (and was a bit more complicated than needed.
Wed, 21 Jun 2017 07:21:50 +0530 topics: use a dict for successors of changesets produced by topic change
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 21 Jun 2017 07:21:50 +0530] rev 2646
topics: use a dict for successors of changesets produced by topic change This patch adds a dictionary to store the successors of changesets which got obsoleted when we change it's topic. This is an improvement in the fix for issue5441.
Wed, 21 Jun 2017 11:55:45 +0200 topic: further simplify the clear logic
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Jun 2017 11:55:45 +0200] rev 2645
topic: further simplify the clear logic We just set 'topic' to None and the rest should follow.
Wed, 21 Jun 2017 03:28:25 +0530 topics: drop the clean argument from _changetopics()
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 21 Jun 2017 03:28:25 +0530] rev 2644
topics: drop the clean argument from _changetopics() After this commit, None will represent that we want to clean the topic.
Wed, 21 Jun 2017 02:00:01 +0530 topics: rename '--change' flag to '--rev' flag
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 21 Jun 2017 02:00:01 +0530] rev 2643
topics: rename '--change' flag to '--rev' flag The --change flag was used to read a revset of which topic should be changed. In mercurial we use --rev for this type of flag. Now things will work as follows: `hg topics topicname`: It will set the current topic `hg topics topicname --rev revset`: Change topic of all the revs in the revset to topicname Further patches will try to achieve the following: `hg topics --clear --rev revset`: clear topic from all the revisions in the revset `hg topics --clear`: clear the current topic (Current behavior) `hg topics --rev revset`: show topics on the revisions in the revset
Wed, 21 Jun 2017 01:05:46 +0530 topics: factor out the logic to change topic in a new function
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 21 Jun 2017 01:05:46 +0530] rev 2642
topics: factor out the logic to change topic in a new function It will help to refactor and fix bugs. Moreover we can re-use the logic.
Wed, 21 Jun 2017 11:45:15 +0200 obslog: update the readme
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Jun 2017 11:45:15 +0200] rev 2641
obslog: update the readme This is release not worthy
Wed, 21 Jun 2017 11:31:21 +0200 obslog: add a comment about the final new line of descriptions
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Jun 2017 11:31:21 +0200] rev 2640
obslog: add a comment about the final new line of descriptions
Tue, 20 Jun 2017 16:22:16 +0200 obslog: also display description patch with --patch
Boris Feld <boris.feld@octobus.net> [Tue, 20 Jun 2017 16:22:16 +0200] rev 2639
obslog: also display description patch with --patch When activating the --patch option, also display the description patch.
Wed, 21 Jun 2017 11:11:37 +0200 obslog: extra patch indentation code
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Jun 2017 11:11:37 +0200] rev 2638
obslog: extra patch indentation code The code is simple and we need to reuse it.
Tue, 20 Jun 2017 13:49:40 +0200 obslog: add a patch option
Boris Feld <boris.feld@octobus.net> [Tue, 20 Jun 2017 13:49:40 +0200] rev 2637
obslog: add a patch option Add support for '--patch' option in obslog for a similar effect than "hg log --patch". The patch support is only limited to a few basic cases that will be extended in the future.
Mon, 19 Jun 2017 19:00:31 +0200 obslog: clarify some sorting code
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Jun 2017 19:00:31 +0200] rev 2636
obslog: clarify some sorting code I'm not sure why Boris did it, but this belong to the next patch.
Mon, 19 Jun 2017 15:56:28 +0200 obslog: pass directly unfiltered_repo
Boris Feld <boris.feld@octobus.net> [Mon, 19 Jun 2017 15:56:28 +0200] rev 2635
obslog: pass directly unfiltered_repo _debugobshistorydisplaynode used to create two times an unfiltered repo, makes _debugobshistoryrevs create only one unfiltered repo and pass it directly.
Mon, 19 Jun 2017 15:54:55 +0200 obslog: remove useless repo arg
Boris Feld <boris.feld@octobus.net> [Mon, 19 Jun 2017 15:54:55 +0200] rev 2634
obslog: remove useless repo arg _debugobshistorydisplaymarker used to takes repo as an argument but it isn't needed anymore.
Mon, 19 Jun 2017 15:32:25 +0200 obslog: small renaming of _debugobshistorysingle
Boris Feld <boris.feld@octobus.net> [Mon, 19 Jun 2017 15:32:25 +0200] rev 2633
obslog: small renaming of _debugobshistorysingle Rename _debugobshistorysingle to _debugobshistoryrevs in order to better reflect its purpose.
Mon, 19 Jun 2017 10:33:36 +0200 refactoring: directly use 'ctx.unstable()' in showstack function
Boris Feld <boris.feld@octobus.net> [Mon, 19 Jun 2017 10:33:36 +0200] rev 2632
refactoring: directly use 'ctx.unstable()' in showstack function This is simpler and more efficient.
Mon, 19 Jun 2017 18:46:30 +0200 packaging: flag default as version 6.5.0.dev
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Jun 2017 18:46:30 +0200] rev 2631
packaging: flag default as version 6.5.0.dev This helps to reduce confusion when installing intermediate version.
Mon, 19 Jun 2017 18:44:17 +0200 merge: get stable change back into default
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Jun 2017 18:44:17 +0200] rev 2630
merge: get stable change back into default
Sat, 17 Jun 2017 01:02:37 +0200 obsfate: improve obsfate output stable
Boris Feld <boris.feld@octobus.net> [Sat, 17 Jun 2017 01:02:37 +0200] rev 2629
obsfate: improve obsfate output Improve obsfate output: * Remove newline and replace it by '; ' * Improve the hybrid object for making join(obsfate, '|') working.
Mon, 19 Jun 2017 18:37:28 +0200 packagin: mark stable branch as 6.4.1.dev stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Jun 2017 18:37:28 +0200] rev 2628
packagin: mark stable branch as 6.4.1.dev This help prevent confusion with installing intermediate version
Mon, 19 Jun 2017 03:13:35 +0530 topics: abort if user wants to show the stack of a non-existent topic
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 19 Jun 2017 03:13:35 +0530] rev 2627
topics: abort if user wants to show the stack of a non-existent topic
Mon, 19 Jun 2017 02:50:35 +0530 stack: show unstable state for the current revision if it is one (issue5553)
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 19 Jun 2017 02:50:35 +0530] rev 2626
stack: show unstable state for the current revision if it is one (issue5553) Before this patch if the current revision is unstable, hg stack does not show the unstable state. This patch fixes that by showing both current and unstable state for the current revision if that's unstable.
Mon, 19 Jun 2017 02:44:19 +0530 topics: some minute fixes to the documentation which shows up in help
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 19 Jun 2017 02:44:19 +0530] rev 2625
topics: some minute fixes to the documentation which shows up in help I am not a native but these changes are simple and obvious.
Sun, 18 Jun 2017 03:23:46 +0530 topics: make sure we commit on new parents while changing topics (issue5441)
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 18 Jun 2017 03:23:46 +0530] rev 2624
topics: make sure we commit on new parents while changing topics (issue5441) While changing topics of a set of linear commits, we used to commit our new changesets with new topic on parents of its predecessor i.e. changeset before the topic change. If the topic of parent was also changed, that parent will become obsolete and hence resulting the cnew commit in unstable state. For a set of linear commits this repeats and we end up in a tree state as mentioned in the bug. This patch fixes the bug by checking whether the parent was obsoleted and if yes, commit on the new parent.
Sun, 18 Jun 2017 03:20:52 +0530 tests: add a test to show issue5441 in test-topic.t
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 18 Jun 2017 03:20:52 +0530] rev 2623
tests: add a test to show issue5441 in test-topic.t The issue will be fixed in the next patch and the test will be helpful to show that.
Sat, 17 Jun 2017 01:15:15 +0200 merge back with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 17 Jun 2017 01:15:15 +0200] rev 2622
merge back with stable (test change from stable has been reverted)
Fri, 16 Jun 2017 20:15:17 +0200 Added tag 6.4.0 for changeset e60248f26f92 stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 20:15:17 +0200] rev 2621
Added tag 6.4.0 for changeset e60248f26f92
Fri, 16 Jun 2017 20:15:04 +0200 packaging: prepare version 6.4.0 stable 6.4.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 20:15:04 +0200] rev 2620
packaging: prepare version 6.4.0
Fri, 16 Jun 2017 20:13:13 +0200 readme: fix readme for future 6.4.0 stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 20:13:13 +0200] rev 2619
readme: fix readme for future 6.4.0
Fri, 16 Jun 2017 19:48:24 +0200 test-compat: merge with mercurial-3.9 mercurial-3.8
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 19:48:24 +0200] rev 2618
test-compat: merge with mercurial-3.9
Fri, 16 Jun 2017 19:48:10 +0200 test-compat: merge with mercurial-4.0 mercurial-3.9
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 19:48:10 +0200] rev 2617
test-compat: merge with mercurial-4.0
Fri, 16 Jun 2017 19:47:35 +0200 test-compat: merge with mercurial-4.1 mercurial-4.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 19:47:35 +0200] rev 2616
test-compat: merge with mercurial-4.1
Fri, 16 Jun 2017 19:27:36 +0200 compat-test: merge with stable mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 19:27:36 +0200] rev 2615
compat-test: merge with stable
Fri, 16 Jun 2017 19:37:13 +0200 test-compat: fix previous merge mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 19:37:13 +0200] rev 2614
test-compat: fix previous merge The merge was a bit too heavy handed in dropping some part of the test.
Fri, 16 Jun 2017 19:22:38 +0200 merge with default stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 19:22:38 +0200] rev 2613
merge with default Integrate new development around obsfate.
Fri, 16 Jun 2017 18:38:04 +0200 obsfate: by default only display the username if differ from the current one
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 18:38:04 +0200] rev 2612
obsfate: by default only display the username if differ from the current one This will will keep the output simple in the simple case.
Fri, 16 Jun 2017 18:03:32 +0200 obsfate: display more data about direct prune markers
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 18:03:32 +0200] rev 2611
obsfate: display more data about direct prune markers This does not handle all cases, but this should handle the most common ones.
Fri, 16 Jun 2017 17:58:17 +0200 obsfate: split markers fetch from successor set annotation
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 17:58:17 +0200] rev 2610
obsfate: split markers fetch from successor set annotation This will help to improve support for pruned changesets.
Fri, 16 Jun 2017 17:55:55 +0200 obsfate: mark successorsetallmarkers public
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 17:55:55 +0200] rev 2609
obsfate: mark successorsetallmarkers public We are about to use it in another module.
Fri, 16 Jun 2017 17:54:27 +0200 obsfate: mark 'preparesuccessorset' as public
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 17:54:27 +0200] rev 2608
obsfate: mark 'preparesuccessorset' as public It is used in another module so it is not really private.
Fri, 16 Jun 2017 16:51:31 +0200 obsfate: use 'split' as verb when appropriate
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 16:51:31 +0200] rev 2607
obsfate: use 'split' as verb when appropriate
Fri, 16 Jun 2017 16:50:11 +0200 obsfate: improve prune support in _successorsetverb
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 16:50:11 +0200] rev 2606
obsfate: improve prune support in _successorsetverb In the prune case, still have markers (at least the prune markers). If we want to be able to return these markers we need the underlying function to support it.
Fri, 16 Jun 2017 12:37:03 +0200 obsfate: rename 'successorsset' to 'sset' in the loop
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 12:37:03 +0200] rev 2605
obsfate: rename 'successorsset' to 'sset' in the loop The old name make it too close to 'successorssets', and the shorter name is not ambiguous in the context anyway.
Fri, 16 Jun 2017 17:42:28 +0200 template: use hex node in the obsmarkers used in the obsfate template
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 17:42:28 +0200] rev 2604
template: use hex node in the obsmarkers used in the obsfate template This was pointed by Yuya and yuya is right.
Fri, 16 Jun 2017 17:34:02 +0200 template: use hex successors in obsfate
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 17:34:02 +0200] rev 2603
template: use hex successors in obsfate This was spotted by Yuya.
Fri, 16 Jun 2017 17:21:49 +0200 template: use hex-node in successors
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 17:21:49 +0200] rev 2602
template: use hex-node in successors AS pointed by yuya on the list, the raw data for the template should be hex and not binary.
Fri, 16 Jun 2017 17:16:26 +0200 template: update successors doc
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 17:16:26 +0200] rev 2601
template: update successors doc I'm not very happy about it, but at lease there is a show description now
Fri, 16 Jun 2017 17:14:11 +0200 template: fix precursors documentation
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 17:14:11 +0200] rev 2600
template: fix precursors documentation
Fri, 16 Jun 2017 17:11:20 +0200 template: used hex-node for the precursors underlying data
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 17:11:20 +0200] rev 2599
template: used hex-node for the precursors underlying data As pointed by yuya on mercurial-dev we should not use binary node here.
Fri, 16 Jun 2017 11:55:40 +0200 compat-test: merge with mercurial-3.9 mercurial-3.8
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 11:55:40 +0200] rev 2598
compat-test: merge with mercurial-3.9
Fri, 16 Jun 2017 11:54:01 +0200 test-compat: merge with mercurial-4.0 branch mercurial-3.9
Boris Feld <boris.feld@octobus.net> [Fri, 16 Jun 2017 11:54:01 +0200] rev 2597
test-compat: merge with mercurial-4.0 branch Minor merge conflict.
Fri, 16 Jun 2017 11:50:19 +0200 compat-test: merge with mercurial-4.1 mercurial-4.0
Boris Feld <boris.feld@octobus.net> [Fri, 16 Jun 2017 11:50:19 +0200] rev 2596
compat-test: merge with mercurial-4.1
Fri, 16 Jun 2017 11:42:00 +0200 compat-test: merge with stable mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 16 Jun 2017 11:42:00 +0200] rev 2595
compat-test: merge with stable * Blackbox format seems to have change when displaying config CLI options. * As obsfate template is now only compatible with hg 4.2+, remove all references to it in test files.
Fri, 16 Jun 2017 11:32:21 +0200 merge with stable stable
Boris Feld <boris.feld@octobus.net> [Fri, 16 Jun 2017 11:32:21 +0200] rev 2594
merge with stable
Fri, 16 Jun 2017 09:22:39 +0200 changelog: announce that obsfate is hg > 4.2 now
Boris Feld <boris.feld@octobus.net> [Fri, 16 Jun 2017 09:22:39 +0200] rev 2593
changelog: announce that obsfate is hg > 4.2 now Update changelog to announce the fact that obsfate has been improved and is now only compatible with mercurial version greater than 4.2.
Thu, 15 Jun 2017 20:40:07 +0200 compat: make obshistory._getdifflines compatible with mercurial 4.1
Boris Feld <boris.feld@octobus.net> [Thu, 15 Jun 2017 20:40:07 +0200] rev 2592
compat: make obshistory._getdifflines compatible with mercurial 4.1 On Mercurial version 4.1 and lower, patch.diff seems to returns an empty list when there is no change. Mercurial 4.2 returns None so we add a if for this case.
Fri, 09 Jun 2017 00:52:54 +0100 obsfate: add a new obsfate template
Boris Feld <boris.feld@octobus.net> [Fri, 09 Jun 2017 00:52:54 +0100] rev 2591
obsfate: add a new obsfate template The obsfate template display for each obsolete changeset a line summarizing what changed between the changeset and its successors. This dict is computed in obshistory._preparesuccessorset. It uses obshistory.FORMATSSETSFUNCTIONS which is a list of function that individually compute a part of each dict. You can override fields or add new ones by adding your own function in this list. The format of obsfate is computed in templatekw.obsfatedefaulttempl and can be wrapped if necessary, the code is not quite extendable for the moment but can be refactored later.
Fri, 09 Jun 2017 00:31:00 +0100 obsfate: prepare fatelog tests
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 09 Jun 2017 00:31:00 +0100] rev 2590
obsfate: prepare fatelog tests Prepare obsfate venue by adding new blank output, it will helps clarify which are the new output due to obsfate or not.
Fri, 09 Jun 2017 00:10:27 +0100 obsfate: build more advanced markers for tests
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 09 Jun 2017 00:10:27 +0100] rev 2589
obsfate: build more advanced markers for tests Prepare obsfate venue by building more advanced markers by varying obs markers users and dates.
Thu, 15 Jun 2017 17:18:25 +0200 readme: fix entry for 6.4.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 15 Jun 2017 17:18:25 +0200] rev 2588
readme: fix entry for 6.4.0 some data were missing and some were in the wrong spot
Thu, 15 Jun 2017 16:29:51 +0200 test: drop now useless config about effect flag
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 15 Jun 2017 16:29:51 +0200] rev 2587
test: drop now useless config about effect flag The experiment is on by default now.
Wed, 14 Jun 2017 15:59:20 +0200 effectflag: activate effect flag by default
Boris Feld <boris.feld@octobus.net> [Wed, 14 Jun 2017 15:59:20 +0200] rev 2586
effectflag: activate effect flag by default Remove forcing effect-flag in test files
Fri, 02 Jun 2017 19:08:50 +0200 effectflag: activate effect flag on test-evolve-obshistory test file
Boris Feld <boris.feld@octobus.net> [Fri, 02 Jun 2017 19:08:50 +0200] rev 2585
effectflag: activate effect flag on test-evolve-obshistory test file Prepare activation of effect flag by default by activating it on test-evolve- obshistory.t test file first.
Sun, 04 Jun 2017 21:43:17 +0200 effectflag: activate effect flag on test-wireproto.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 21:43:17 +0200] rev 2584
effectflag: activate effect flag on test-wireproto.t test file Prepare activation of effect flag by default by activating it on test- wireproto.t test file first.
Sun, 04 Jun 2017 21:35:17 +0200 effectflag: activate effect flag on test-uncommit.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 21:35:17 +0200] rev 2583
effectflag: activate effect flag on test-uncommit.t test file Prepare activation of effect flag by default by activating it on test- uncommit.t test file first.
Sun, 04 Jun 2017 21:32:33 +0200 effectflag: activate effect flag on test-stabilize-order.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 21:32:33 +0200] rev 2582
effectflag: activate effect flag on test-stabilize-order.t test file Prepare activation of effect flag by default by activating it on test- stabilize-order.t test file first.
Sun, 04 Jun 2017 21:30:08 +0200 effectflag: activate effect flag on test-obsconvert.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 21:30:08 +0200] rev 2581
effectflag: activate effect flag on test-obsconvert.t test file Prepare activation of effect flag by default by activating it on test- obsconvert.t test file first.
Wed, 14 Jun 2017 16:01:56 +0200 effectflag: activate effect flag for obsmarkers-case-*.t test files
Boris Feld <boris.feld@octobus.net> [Wed, 14 Jun 2017 16:01:56 +0200] rev 2580
effectflag: activate effect flag for obsmarkers-case-*.t test files Prepare activation of effect flag by default by activating it on test- exchange-obsmarkers-case-*.t test file first.
Sun, 04 Jun 2017 20:53:36 +0200 effectflag: activate effect flag on test-drop.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 20:53:36 +0200] rev 2579
effectflag: activate effect flag on test-drop.t test file Prepare activation of effect flag by default by activating it on test-drop.t test file first.
Sun, 04 Jun 2017 20:51:50 +0200 effectflag: activate effect flag on test-amend.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 20:51:50 +0200] rev 2578
effectflag: activate effect flag on test-amend.t test file Prepare activation of effect flag by default by activating it on test- amend.t test file first.
Sun, 04 Jun 2017 20:47:04 +0200 effectflag: activate effect flag on test-stabilize-result.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 20:47:04 +0200] rev 2577
effectflag: activate effect flag on test-stabilize-result.t test file Prepare activation of effect flag by default by activating it on test- stabilize-result.t test file first.
Sun, 04 Jun 2017 20:43:22 +0200 effectflag: activate effect flag on test-split.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 20:43:22 +0200] rev 2576
effectflag: activate effect flag on test-split.t test file Prepare activation of effect flag by default by activating it on test-split.t test file first.
Sun, 04 Jun 2017 20:38:04 +0200 effectflag: activate effect flag on test-evolve-cycles.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 20:38:04 +0200] rev 2575
effectflag: activate effect flag on test-evolve-cycles.t test file Prepare activation of effect flag by default by activating it on test-evolve- cycles.t test file first.
Sun, 04 Jun 2017 20:33:45 +0200 effectflag: activate effect flag on test-evolve-obshistory-complex.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 20:33:45 +0200] rev 2574
effectflag: activate effect flag on test-evolve-obshistory-complex.t test file Prepare activation of effect flag by default by activating it on test-evolve- obshistory-complex.t test file first.
Sun, 04 Jun 2017 20:30:46 +0200 effectflag: activate effect flag on test-prune.t test file
Boris Feld <boris.feld@octobus.net> [Sun, 04 Jun 2017 20:30:46 +0200] rev 2573
effectflag: activate effect flag on test-prune.t test file Prepare activation of effect flag by default by activating it on test-prune.t test file first.
Fri, 02 Jun 2017 19:53:42 +0200 effectflag: activate effect flag on test-evolve.t test file
Boris Feld <boris.feld@octobus.net> [Fri, 02 Jun 2017 19:53:42 +0200] rev 2572
effectflag: activate effect flag on test-evolve.t test file Prepare activation of effect flag by default by activating it on test-evolve.t test file first.
Fri, 02 Jun 2017 19:33:21 +0200 effectflag: activate effect flag on test-obsolete test file
Boris Feld <boris.feld@octobus.net> [Fri, 02 Jun 2017 19:33:21 +0200] rev 2571
effectflag: activate effect flag on test-obsolete test file Prepare activation of effect flag by default by activating it on test- obsolete.t test file first.
Fri, 09 Jun 2017 01:39:42 +0100 obscache: directly allocate zeroed bytearray
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 09 Jun 2017 01:39:42 +0100] rev 2570
obscache: directly allocate zeroed bytearray This is much faster that incrementally appending to it. On mozilla central without obsolescence markers this move full cache building from 0.3s to nothing visible.
Fri, 09 Jun 2017 01:26:29 +0100 obscache: plug on core 'update cache' method if available
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 09 Jun 2017 01:26:29 +0100] rev 2569
obscache: plug on core 'update cache' method if available I was planning to have this implemented in core but since things are not getting in I'm updating evolve.
Thu, 15 Jun 2017 11:31:07 +0200 obscache: pre-indent code
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 15 Jun 2017 11:31:07 +0200] rev 2568
obscache: pre-indent code This will make the next changeset clearer.
Thu, 15 Jun 2017 13:26:05 +0200 fix: fix _headssummary call to orig
Boris Feld <boris.feld@octobus.net> [Thu, 15 Jun 2017 13:26:05 +0200] rev 2567
fix: fix _headssummary call to orig 65cf338258d2 one of two orig call wasn't compatible with mercurial version < 4.3, fix it.
Thu, 15 Jun 2017 14:44:45 +0200 test-update: update hg update output in test files
Boris Feld <boris.feld@octobus.net> [Thu, 15 Jun 2017 14:44:45 +0200] rev 2566
test-update: update hg update output in test files Following hg revision 1b5c61d38a52, hg update now show the commit to which we updated in case of multiple heads. test-obsolete.t and test-sharing.t falls in these situations, acknowledge the new outputted line.
Thu, 15 Jun 2017 14:36:54 +0200 test-drop: all obsmarkers are now dropped
Boris Feld <boris.feld@octobus.net> [Thu, 15 Jun 2017 14:36:54 +0200] rev 2565
test-drop: all obsmarkers are now dropped Previously, hg drop may leave some obsmarkers behind, like with temporary amend commit. Following mercurial revision 71eb6a098315, strip now correctly remove the associated obsmarkers and as drop is also calling strip, the bug is now resolved.
Thu, 15 Jun 2017 13:10:43 +0200 test-evolve: garbage collection changeset only, not obsmarkers
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 15 Jun 2017 13:10:43 +0200] rev 2564
test-evolve: garbage collection changeset only, not obsmarkers
Thu, 15 Jun 2017 13:03:45 +0200 test-inhibit: adapt to 4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 15 Jun 2017 13:03:45 +0200] rev 2563
test-inhibit: adapt to 4.3 version 4.3 introduce markers stripping with strip. We adapt the test output to the (harmless) consequence.
Thu, 15 Jun 2017 13:00:16 +0200 test-exchange-case-D3: avoid stripping obsolescence marker
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 15 Jun 2017 13:00:16 +0200] rev 2562
test-exchange-case-D3: avoid stripping obsolescence marker The test needs to have changeset unknown locally with obsolescence markers still applying to them. So we make sure the markers are not stripped (future 4.3 strip markers by default).
Thu, 15 Jun 2017 12:59:59 +0200 test-exchange-case-D2: avoid stripping obsolescence marker
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 15 Jun 2017 12:59:59 +0200] rev 2561
test-exchange-case-D2: avoid stripping obsolescence marker The test needs to have changeset unknown locally with obsolescence markers still applying to them. So we make sure the markers are not stripped (future 4.3 strip markers by default).
Thu, 15 Jun 2017 12:59:38 +0200 test-exchange-case-D1: avoid stripping obsolescence marker
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 15 Jun 2017 12:59:38 +0200] rev 2560
test-exchange-case-D1: avoid stripping obsolescence marker The test needs to have changeset unknown locally with obsolescence markers still applying to them. So we make sure the markers are not stripped (future 4.3 strip markers by default).
Wed, 14 Jun 2017 15:08:40 +0200 test: fix test-discovery-obshashrange.t new output
Boris Feld <boris.feld@octobus.net> [Wed, 14 Jun 2017 15:08:40 +0200] rev 2559
test: fix test-discovery-obshashrange.t new output Update test-discovery-obshashrange.t test file with new mercurial dev output.
Wed, 14 Jun 2017 13:56:40 +0200 fix: fix _headssummary api
Boris Feld <boris.feld@octobus.net> [Wed, 14 Jun 2017 13:56:40 +0200] rev 2558
fix: fix _headssummary api _headssummary now takes directly the pushop, update the topic extension wrapping to fix the API.
Wed, 31 May 2017 22:15:34 +0200 url: update url to point to https://www.mercurial-scm.org/repo/evolve stable
André Sintzoff <andre.sintzoff@gmail.com> [Wed, 31 May 2017 22:15:34 +0200] rev 2557
url: update url to point to https://www.mercurial-scm.org/repo/evolve
Thu, 08 Jun 2017 20:52:40 +0100 doc: document the evolve templates
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 08 Jun 2017 20:52:40 +0100] rev 2556
doc: document the evolve templates
Thu, 08 Jun 2017 02:58:54 +0100 test: fix template condition for obsfate
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 08 Jun 2017 02:58:54 +0100] rev 2555
test: fix template condition for obsfate
Wed, 07 Jun 2017 10:22:00 +0100 obscache: add a missing "new line" at the end of a debug message stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 07 Jun 2017 10:22:00 +0100] rev 2554
obscache: add a missing "new line" at the end of a debug message
Wed, 07 Jun 2017 01:38:48 +0100 default: merge back with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 07 Jun 2017 01:38:48 +0100] rev 2553
default: merge back with stable
Mon, 05 Jun 2017 10:21:38 +0100 obscache: shortcut the attribute access for testing
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 05 Jun 2017 10:21:38 +0100] rev 2552
obscache: shortcut the attribute access for testing The attribute access adds a significant overhead. we can gain -20% performance by doing so.
Wed, 07 Jun 2017 00:48:12 +0100 obshashrange: add an option to protect from accidental activation stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 07 Jun 2017 00:48:12 +0100] rev 2551
obshashrange: add an option to protect from accidental activation The new 'obshashrange.max-revs' option is meant to help large installation like bitbucket to avoid impact on repositories that cannot handle it.
Wed, 07 Jun 2017 00:12:08 +0100 obshashrange: basic proof reading of the documentation stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 07 Jun 2017 00:12:08 +0100] rev 2550
obshashrange: basic proof reading of the documentation Nothing major but this should be a bit better.
Mon, 05 Jun 2017 10:21:26 +0100 proofread stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 05 Jun 2017 10:21:26 +0100] rev 2549
proofread
Fri, 02 Jun 2017 19:07:35 +0200 effectflag: fix content change detection for filtered revs stable
Boris Feld <boris.feld@octobus.net> [Fri, 02 Jun 2017 19:07:35 +0200] rev 2548
effectflag: fix content change detection for filtered revs In some cases (like amended an obsolete changeset), computing the diff and comparing them need to work with filtered revisions. We need to use unfiltered change contexts to safely compute diffs.
Mon, 05 Jun 2017 10:15:00 +0100 debugobsstorestat: adds static about actually obsolete changeses stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 05 Jun 2017 10:15:00 +0100] rev 2547
debugobsstorestat: adds static about actually obsolete changeses
Tue, 06 Jun 2017 15:10:13 -0700 evolve: fix typo: -list -> --list stable
Kyle Lippincott <spectral@google.com> [Tue, 06 Jun 2017 15:10:13 -0700] rev 2546
evolve: fix typo: -list -> --list
Thu, 01 Jun 2017 16:26:00 +0200 Added tag 6.3.1 for changeset e358c0263e46 stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 01 Jun 2017 16:26:00 +0200] rev 2545
Added tag 6.3.1 for changeset e358c0263e46
Thu, 01 Jun 2017 16:25:50 +0200 prepare release 6.3.1 stable 6.3.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 01 Jun 2017 16:25:50 +0200] rev 2544
prepare release 6.3.1
Thu, 01 Jun 2017 03:35:45 +0200 merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 01 Jun 2017 03:35:45 +0200] rev 2543
merge with stable
Thu, 01 Jun 2017 03:32:10 +0200 packaging: bump to 6.4.0.dev
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 01 Jun 2017 03:32:10 +0200] rev 2542
packaging: bump to 6.4.0.dev
Thu, 01 Jun 2017 03:19:07 +0200 serveronly: also backport the fixes from 5adb8bdb935e stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 01 Jun 2017 03:19:07 +0200] rev 2541
serveronly: also backport the fixes from 5adb8bdb935e The fixes to the computation of "relevant" markers. Was missing for server only.
Thu, 01 Jun 2017 02:48:58 +0200 merge stable back into default
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 01 Jun 2017 02:48:58 +0200] rev 2540
merge stable back into default
Thu, 01 Jun 2017 02:31:31 +0200 readme: merge 6.2.2 and 6.3.0 changelog stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 01 Jun 2017 02:31:31 +0200] rev 2539
readme: merge 6.2.2 and 6.3.0 changelog 6.2.2 never happened.
Thu, 01 Jun 2017 02:30:55 +0200 packaging: mark as version 6.3.1.dev stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 01 Jun 2017 02:30:55 +0200] rev 2538
packaging: mark as version 6.3.1.dev This reduce confusion when installing version from source.
Thu, 01 Jun 2017 02:28:36 +0200 readme: clarify the branch policy stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 01 Jun 2017 02:28:36 +0200] rev 2537
readme: clarify the branch policy
Wed, 31 May 2017 14:36:25 +0200 Added tag 6.3.0 for changeset 6da4ca7b3e4f stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 31 May 2017 14:36:25 +0200] rev 2536
Added tag 6.3.0 for changeset 6da4ca7b3e4f
Wed, 31 May 2017 14:35:21 +0200 packaging: prepare release 6.3.0 stable 6.3.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 31 May 2017 14:35:21 +0200] rev 2535
packaging: prepare release 6.3.0
Wed, 31 May 2017 14:29:16 +0200 test-compat: merge with mercurial-3.9 mercurial-3.8
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 31 May 2017 14:29:16 +0200] rev 2534
test-compat: merge with mercurial-3.9
Wed, 31 May 2017 14:28:14 +0200 test-compat: merge with mercurial-4.0 branch mercurial-3.9
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 31 May 2017 14:28:14 +0200] rev 2533
test-compat: merge with mercurial-4.0 branch The new 'olog' command is not working with 3.9 so we skill all mentions of it in the tests. This also apply to the topic extensions.
Wed, 31 May 2017 14:23:45 +0200 test-compat: merge with mercurial-4.1 mercurial-4.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 31 May 2017 14:23:45 +0200] rev 2532
test-compat: merge with mercurial-4.1 hg log has no trouble field in mercurial 4.0, output fixed.
Wed, 31 May 2017 14:21:18 +0200 test-compat: merge with stable mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 31 May 2017 14:21:18 +0200] rev 2531
test-compat: merge with stable Nothing special to report, minor test-metaedit.t output change.
Wed, 31 May 2017 14:12:33 +0200 merge with default stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 31 May 2017 14:12:33 +0200] rev 2530
merge with default
Wed, 31 May 2017 12:09:24 +0200 compat: fix stablerange for mercurial 3.9
Boris Feld <boris.feld@octobus.net> [Wed, 31 May 2017 12:09:24 +0200] rev 2529
compat: fix stablerange for mercurial 3.9 Lrudict.get change of api between mercurial 3.9 and mercurial 4.2. Bypass this limitation by using lrudict.__getitem__ and catch the KeyError directly.
Tue, 30 May 2017 22:09:28 +0200 template: fix successors and precursors templates
Boris Feld <boris.feld@octobus.net> [Tue, 30 May 2017 22:09:28 +0200] rev 2528
template: fix successors and precursors templates In mercurial 4.1-, the gen argument is expected to be an iterator and not an iterable, fix successors and precursors templates.
Tue, 30 May 2017 19:59:57 +0200 lint: remove double newline in test file
Boris Feld <boris.feld@octobus.net> [Tue, 30 May 2017 19:59:57 +0200] rev 2527
lint: remove double newline in test file Test file test-stablesort-criss-cross.t contained two double newline, I remove them.
Tue, 30 May 2017 19:43:14 +0200 template: fix precursors template for older mercurial version
Boris Feld <boris.feld@octobus.net> [Tue, 30 May 2017 19:43:14 +0200] rev 2526
template: fix precursors template for older mercurial version In mercurial 4.1 and below templatekw._hybrid require the gen argument to be different than None. Manually compute the same default output for these older mercurial versions.
Tue, 30 May 2017 13:16:43 +0200 compatibility: backport mercurial 176d1a0ce385
Boris Feld <boris.feld@octobus.net> [Tue, 30 May 2017 13:16:43 +0200] rev 2525
compatibility: backport mercurial 176d1a0ce385 Backport obsstore.relevantmarkers change for including previously forgotten pruned obs markers. Target mercurial version lesser than 4.3. This impact multiple tests. All test changes has been manually checked. Since the computation of relevant obsmarkers have changed, we are bumping the cache schema version. So that caches get recomputed.
Tue, 30 May 2017 17:39:00 +0200 evolve: fix import order
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 17:39:00 +0200] rev 2524
evolve: fix import order
Fri, 26 May 2017 14:47:33 +0200 compat: adapt to buildobsmarkerspart move
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 14:47:33 +0200] rev 2523
compat: adapt to buildobsmarkerspart move The function has been moved in e70d6dbde713 so we must we search in both location.
Tue, 30 May 2017 11:06:24 +0200 effetflag: detect other meta (extra) changes
Boris Feld <boris.feld@octobus.net> [Tue, 30 May 2017 11:06:24 +0200] rev 2522
effetflag: detect other meta (extra) changes Check other changeset meta other than branch and *_source and if there is a change, set the METACHANGED effect flag. Add a test for this scenario with a topic change.
Tue, 30 May 2017 17:32:39 +0200 obsdiscovery: add an option to disable all obsdiscovery
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 17:32:39 +0200] rev 2521
obsdiscovery: add an option to disable all obsdiscovery On large repository, computing the obshashtree can we as slow as resending everything. We give the option for people to opt out.
Tue, 30 May 2017 11:39:45 +0200 effectflag: better diff detection
Boris Feld <boris.feld@octobus.net> [Tue, 30 May 2017 11:39:45 +0200] rev 2520
effectflag: better diff detection Improve the diff detection algorithm to have less false positive like in the case of a rebase that move the hunk in the file but the hunk stays the same.
Tue, 30 May 2017 11:38:30 +0200 effectflag: add a test for content detection
Boris Feld <boris.feld@octobus.net> [Tue, 30 May 2017 11:38:30 +0200] rev 2519
effectflag: add a test for content detection Add a test for diff detection when the diff is different but only because of line numbers. The test is a append at the end of the file and we try to rebase it. We shouldn't detect a content change, it will be done in the next patch.
Tue, 30 May 2017 14:46:36 +0200 test: fix test-evolve-effectflags dates
Boris Feld <boris.feld@octobus.net> [Tue, 30 May 2017 14:46:36 +0200] rev 2518
test: fix test-evolve-effectflags dates Mercurial < 4.3 don't have default date so add globs in the test-metaedit.t file.
Tue, 30 May 2017 14:43:20 +0200 test: fix metaedit tests by forcing dates
Boris Feld <boris.feld@octobus.net> [Tue, 30 May 2017 14:43:20 +0200] rev 2517
test: fix metaedit tests by forcing dates Mercurial < 4.3 don't have default date so restore aliases forcing date in the test-metaedit.t file.
Tue, 30 May 2017 16:39:59 +0200 test: split test-stablesort.t in two
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 16:39:59 +0200] rev 2516
test: split test-stablesort.t in two This is the longest running test so we split it in two to help with parallel execution.
Tue, 30 May 2017 13:01:11 +0200 obsdiscovery: automatically pick protocol in a list
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 13:01:11 +0200] rev 2515
obsdiscovery: automatically pick protocol in a list This makes the code cleaner, clearer and more flexible. This also prepare the ability to disable obsmarkers discover entirely.
Tue, 30 May 2017 14:35:40 +0200 obsdiscovery: extract push-obshashtree discovery in a function
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 14:35:40 +0200] rev 2514
obsdiscovery: extract push-obshashtree discovery in a function This will help use to simplify the code.
Tue, 30 May 2017 14:27:26 +0200 obsdiscovery: directly use the 'only' revset for obshashtree
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 14:27:26 +0200] rev 2513
obsdiscovery: directly use the 'only' revset for obshashtree The revset now exists and is fast. This remove the needs to hold a reference to "revs" in that code.
Tue, 30 May 2017 14:21:10 +0200 obsdiscovery: extract push-obshashrange discovery in a function
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 14:21:10 +0200] rev 2512
obsdiscovery: extract push-obshashrange discovery in a function This will help us to simplify the code. The code is updated to directly use 'outgoing' missing so that is no longer needs to access 'futureheads'.
Tue, 30 May 2017 14:09:06 +0200 obsdiscovery: merge two distinct if statement
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 14:09:06 +0200] rev 2511
obsdiscovery: merge two distinct if statement It did not made any sense for them to be split.
Tue, 30 May 2017 12:32:14 +0200 obsdiscovery: extract '_canobshashtree'
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 12:32:14 +0200] rev 2510
obsdiscovery: extract '_canobshashtree' having this as a simple function will help use to generalise the obsdiscovery algorithm we use.
Tue, 30 May 2017 12:26:57 +0200 obsdiscovery: move code inserting discovery at the end of the file
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 12:26:57 +0200] rev 2509
obsdiscovery: move code inserting discovery at the end of the file This makes it easier to reuser function defined earlier in the file.
Tue, 30 May 2017 12:15:52 +0200 obsdiscovery: trust core to do the right thing if no discovery is available
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 12:15:52 +0200] rev 2508
obsdiscovery: trust core to do the right thing if no discovery is available This is fixed for a long time now.
Tue, 30 May 2017 12:13:14 +0200 obsdiscovery: factor the "do we push markers" check out
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 12:13:14 +0200] rev 2507
obsdiscovery: factor the "do we push markers" check out This clarify the code a bit.
Tue, 30 May 2017 11:55:58 +0200 stablerange: also respect the 'warm-cache' config
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 11:55:58 +0200] rev 2506
stablerange: also respect the 'warm-cache' config This will help large install to enable obshashrange as "opt-in" without impacting other repositories.
Tue, 30 May 2017 11:49:00 +0200 debugstablerange: cleanly "Abort" when no revision are specified
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 11:49:00 +0200] rev 2505
debugstablerange: cleanly "Abort" when no revision are specified Previously we had a traceback from a max on an empty sequence.
Tue, 30 May 2017 11:12:02 +0200 stablerange: use last recently used caching for revisions associated to ranges
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 11:12:02 +0200] rev 2504
stablerange: use last recently used caching for revisions associated to ranges This does not make things faster but at least it make them able to finish on large repositories.
Tue, 30 May 2017 11:12:12 +0200 stablerange: report progress more often in slow case
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 11:12:12 +0200] rev 2503
stablerange: report progress more often in slow case For small repositories the time spent in progress was problematic. However on large repository it quickly becomes negligible, so we add a way to detect this case and report more often in this case.
Mon, 29 May 2017 14:03:31 +0200 template: update successors template output
Boris Feld <boris.feld@octobus.net> [Mon, 29 May 2017 14:03:31 +0200] rev 2502
template: update successors template output Use templatekw._hybrid as return value for precursor template, it's nicer and easier to play with than returning a formatted string.
Mon, 29 May 2017 17:54:14 +0200 test: extract metaedit tests into test-metaedit.t test file
Boris Feld <boris.feld@octobus.net> [Mon, 29 May 2017 17:54:14 +0200] rev 2501
test: extract metaedit tests into test-metaedit.t test file The metaedit command deserver it own test file and this shave of 15% of the runtime of test-evolve.t one of our longest tests.
Mon, 29 May 2017 12:15:47 +0200 template: update precursors template output
Boris Feld <boris.feld@octobus.net> [Mon, 29 May 2017 12:15:47 +0200] rev 2500
template: update precursors template output Use templatekw._hybrid as return value for precursor template, it's nicer and easier to play with than returning a formatted string.
Mon, 29 May 2017 17:16:15 +0200 template: skip "fate" in test output when empty
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 29 May 2017 17:16:15 +0200] rev 2499
template: skip "fate" in test output when empty This should clarify the test output a bit.
Mon, 29 May 2017 17:13:21 +0200 template: skip "successors" in test output when empty
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 29 May 2017 17:13:21 +0200] rev 2498
template: skip "successors" in test output when empty This should clarify the test output a bit.
Mon, 29 May 2017 17:10:45 +0200 template: make the template definition more manageable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 29 May 2017 17:10:45 +0200] rev 2497
template: make the template definition more manageable Readable config is readable
Mon, 29 May 2017 17:07:23 +0200 template: skip "Precursors" in test output when empty
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 29 May 2017 17:07:23 +0200] rev 2496
template: skip "Precursors" in test output when empty This should clarify the test output a bit.
Mon, 29 May 2017 16:59:59 +0200 template: move each template on its own line during tests
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 29 May 2017 16:59:59 +0200] rev 2495
template: move each template on its own line during tests This will clarify the various coming changes around template.
Mon, 29 May 2017 11:03:13 +0200 refactoring: rename obsfate template to obsfate_quiet
Boris Feld <boris.feld@octobus.net> [Mon, 29 May 2017 11:03:13 +0200] rev 2494
refactoring: rename obsfate template to obsfate_quiet As I don't know how to handle templates arguments, create different templates for each verbosity level wanted.
Mon, 29 May 2017 16:39:32 +0200 doc: add documentation about effectflag experiment
Boris Feld <boris.feld@octobus.net> [Mon, 29 May 2017 16:39:32 +0200] rev 2493
doc: add documentation about effectflag experiment
Fri, 26 May 2017 18:27:59 +0200 effectflag: split effect flag meta
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 18:27:59 +0200] rev 2492
effectflag: split effect flag meta Split effect flag meta into 3 separate flags: - USERCHANGED - DATECHANGED - BRANCHCHANGED Also display them separately for the moment, they could be grouped back together if we want later.
Fri, 26 May 2017 21:31:07 +0200 tests: update missing amend
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 21:31:07 +0200] rev 2491
tests: update missing amend (I need a hook)
Fri, 26 May 2017 19:21:36 +0200 template: update obsfate to be more human friendly
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 19:21:36 +0200] rev 2490
template: update obsfate to be more human friendly Approach the obslog output for the moment.
Fri, 26 May 2017 13:28:49 +0200 template: add the obsfate template
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 13:28:49 +0200] rev 2489
template: add the obsfate template Reuse _getobsoletefate and nextvisiblesuccessors to easily get the obsolescence fate of any node. The limitation is that obsfate is as precise as these two functions, which is not great for nextvisiblesuccessors.
Fri, 26 May 2017 13:18:26 +0200 refactor: extract obs fate algorithm from _getobsoletereason
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 13:18:26 +0200] rev 2488
refactor: extract obs fate algorithm from _getobsoletereason Refactor _getobsoletereason to extract the obs fate computation into a separate function, it will be used later and put it in obshistory as it will be needed in other files. Rename _getobsoletereason to _getobsoletefateandsuccessors.
Fri, 26 May 2017 10:05:37 +0200 template: add successors template
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 10:05:37 +0200] rev 2487
template: add successors template The successors templates display the closest visible successors of each changeset, we may have gap, like in this case: A -> B -> C -> D If we display A, C and D but not B, we can't display than B is the closest successor of A because it's not displayed. We display C as the closest successor of A instead.
Fri, 26 May 2017 10:05:27 +0200 template: add precursors template
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 10:05:27 +0200] rev 2486
template: add precursors template The precursors templates display the closest visible precursors of each changeset, we may have gap, like in this case: A -> B -> C If we display A and C but not B, we can't display than B is the closest precursor of C because it's not displayed. We display A as the closest precursor of C instead. Add a new test file as we will need to generate theses gaps and modifying test-evolve-obshistory.t will lead to many unrelated lines changes.
Fri, 26 May 2017 16:00:05 +0200 refactor: extract templates into a new file
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 16:00:05 +0200] rev 2485
refactor: extract templates into a new file Extract evolve template from evolve/__init__.py to evolve/templatekw.py as more templates will come in the future.
Tue, 23 May 2017 19:48:04 +0200 obshistory: add the all option to obslog to show the while obs tree
Boris Feld <boris.feld@octobus.net> [Tue, 23 May 2017 19:48:04 +0200] rev 2484
obshistory: add the all option to obslog to show the while obs tree Add a --all option to obslog in order to display also the successors of each obs markers. It has the effect of showing a more comprehensive graph when a split or a divergence happened.
Fri, 26 May 2017 16:12:07 +0200 merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 16:12:07 +0200] rev 2483
merge with stable
Fri, 26 May 2017 15:57:17 +0200 readme: update changelog for 6.2.2 stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 15:57:17 +0200] rev 2482
readme: update changelog for 6.2.2
Fri, 26 May 2017 15:01:21 +0200 test: fix test-evolve.t stable
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 15:01:21 +0200] rev 2481
test: fix test-evolve.t Metaedit take the current date when no date is given. When we added default- date, the date ended up to be the same and the behavior changed. Fix the text by disabling default-date in the metaedit call and update the comment about what is needed to fix correctly the test; take the changeset date when metaediting only one changeset.
Fri, 26 May 2017 10:25:16 +0200 test: split evolve cycle tests in a separate test file
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 10:25:16 +0200] rev 2480
test: split evolve cycle tests in a separate test file
Thu, 25 May 2017 21:14:04 +0200 evolve: fix --rev with --list stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 May 2017 21:14:04 +0200] rev 2479
evolve: fix --rev with --list This was untested and never worked.
Wed, 24 May 2017 18:17:01 +0200 test: improve the globing for obsmarker date stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 24 May 2017 18:17:01 +0200] rev 2478
test: improve the globing for obsmarker date If we force the date of obsmarkers, they will no longer include "20".
Tue, 23 May 2017 19:21:43 +0200 test: rename all olog references
Boris Feld <boris.feld@octobus.net> [Tue, 23 May 2017 19:21:43 +0200] rev 2477
test: rename all olog references Replace them by hg obslog which is more explicit.
Wed, 24 May 2017 18:17:01 +0200 test: improve the globing for obsmarker date
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 24 May 2017 18:17:01 +0200] rev 2476
test: improve the globing for obsmarker date If we force the date of obsmarkers, they will no longer include "20".
Wed, 24 May 2017 16:43:04 +0200 documentation: recomment using blackbox with the obshashrange experiment stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 24 May 2017 16:43:04 +0200] rev 2475
documentation: recomment using blackbox with the obshashrange experiment
Tue, 23 May 2017 10:50:56 +0200 merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 23 May 2017 10:50:56 +0200] rev 2474
merge with stable
Tue, 23 May 2017 10:49:59 +0200 packaging: update the development version number stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 23 May 2017 10:49:59 +0200] rev 2473
packaging: update the development version number This helps catch non-tagged version installed with pip.
Tue, 23 May 2017 10:48:21 +0200 Added tag 6.2.1 for changeset 0af99106b075 stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 23 May 2017 10:48:21 +0200] rev 2472
Added tag 6.2.1 for changeset 0af99106b075
Tue, 23 May 2017 10:48:14 +0200 packaging: prepare release 6.2.1 stable 6.2.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 23 May 2017 10:48:14 +0200] rev 2471
packaging: prepare release 6.2.1
Mon, 22 May 2017 16:01:59 +0200 compat: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 16:01:59 +0200] rev 2470
compat: merge with stable Stable has multiple changeset that solve deprecation warning for the future Mercurial 4.3.
Mon, 22 May 2017 15:45:42 +0200 test-compat: merge with mercurial-3.9 mercurial-3.8
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 15:45:42 +0200] rev 2469
test-compat: merge with mercurial-3.9
Mon, 22 May 2017 15:42:13 +0200 test-compat: merge with mercurial-4.0 branch mercurial-3.9
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 15:42:13 +0200] rev 2468
test-compat: merge with mercurial-4.0 branch
Mon, 22 May 2017 15:34:36 +0200 test-compat: merge with mercurial-4.1 mercurial-4.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 15:34:36 +0200] rev 2467
test-compat: merge with mercurial-4.1 Nothing to report
Mon, 22 May 2017 15:28:36 +0200 test-compat: merge with stable mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 15:28:36 +0200] rev 2466
test-compat: merge with stable Nothing special to report, minor blackbox output update and color extensions was needed for test-prune.t
Mon, 22 May 2017 12:00:57 +0200 deprecation: fix dirstate.beginparentchange deprecation warning stable
Boris Feld <boris.feld@octobus.net> [Mon, 22 May 2017 12:00:57 +0200] rev 2465
deprecation: fix dirstate.beginparentchange deprecation warning Replace calls to dirstart.beginparentchange and dirstate.endparentchange to dirstate.parentchange context manager.
Mon, 22 May 2017 14:57:47 +0200 deprecation: fix cmdutil.command deprecation warning stable
Boris Feld <boris.feld@octobus.net> [Mon, 22 May 2017 14:57:47 +0200] rev 2464
deprecation: fix cmdutil.command deprecation warning
Sun, 21 May 2017 23:58:55 +0200 obshistory: be more flexible about createmarkers API
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 23:58:55 +0200] rev 2463
obshistory: be more flexible about createmarkers API The API got touched in core.
Sun, 21 May 2017 23:56:33 +0200 inhibit: be more flexible on createmarkers API stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 23:56:33 +0200] rev 2462
inhibit: be more flexible on createmarkers API This API got touched in core.
Sun, 21 May 2017 14:27:23 +0200 merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 14:27:23 +0200] rev 2461
merge with stable
Sun, 21 May 2017 14:20:24 +0200 obshashrange: document the experiment stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 14:20:24 +0200] rev 2460
obshashrange: document the experiment This should help people jump in.
Sun, 21 May 2017 13:55:09 +0200 obshashrange: add an option to disable local cache warming stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 13:55:09 +0200] rev 2459
obshashrange: add an option to disable local cache warming The cache still a bit too volatile an costly to update. This offer a way for developer working copy to only compute it when used.
Sat, 20 May 2017 03:31:42 +0200 obshashrange: re-warm less revision after reset stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 May 2017 03:31:42 +0200] rev 2458
obshashrange: re-warm less revision after reset rewarming every single revision get very expensive quickly. Instead we warm few key revision and rely on the fact this will warm enough useful subrange.
Fri, 19 May 2017 20:52:09 +0200 effectflag: simplify meta data change testing
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:52:09 +0200] rev 2457
effectflag: simplify meta data change testing Let us just do one larger test. G: changed hgext3rd/evolve/obshistory.py
Fri, 19 May 2017 20:50:49 +0200 effectflag: add a small comment to suggest improvement
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:50:49 +0200] rev 2456
effectflag: add a small comment to suggest improvement The code run but we will likely need something easier to extend.
Fri, 19 May 2017 20:50:00 +0200 effectflag: handle invalid data
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:50:00 +0200] rev 2455
effectflag: handle invalid data If we get a marker with an invalid input we should not crash the whole process.
Fri, 19 May 2017 20:49:20 +0200 effetflag: move the flag back with the test of the creation logic
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:49:20 +0200] rev 2454
effetflag: move the flag back with the test of the creation logic Previous changeset was published by mistake.
Fri, 19 May 2017 20:21:10 +0200 obshistory: display informations from the obs marker effect flag
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 20:21:10 +0200] rev 2453
obshistory: display informations from the obs marker effect flag Leverage the effect flag to actually show what change for each obsmarker in the obslog command. (first basic version).
Fri, 19 May 2017 20:43:16 +0200 test: add (glob) to globed line
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:43:16 +0200] rev 2452
test: add (glob) to globed line Ingloriously forgot to amend.
Fri, 19 May 2017 19:45:04 +0200 effectflag: add test combining multiple flag
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 19:45:04 +0200] rev 2451
effectflag: add test combining multiple flag We check that multiple changes might be detected a the same time.
Fri, 19 May 2017 20:15:05 +0200 effectflag: basic diff change detection
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:15:05 +0200] rev 2450
effectflag: basic diff change detection We adds some basic diff detection.
Fri, 19 May 2017 19:52:57 +0200 effectflag: detect parent change
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 19:52:57 +0200] rev 2449
effectflag: detect parent change Add the detection of parent changes.
Fri, 19 May 2017 19:48:44 +0200 effectflag: detect meta changes
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 19:48:44 +0200] rev 2448
effectflag: detect meta changes Add the detection of known meta field changes. The known meta fields that we check are: - user - date - branch
Fri, 19 May 2017 19:43:06 +0200 effect-flag: rework existing test to prepare for mor tests
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 19:43:06 +0200] rev 2447
effect-flag: rework existing test to prepare for mor tests
Fri, 19 May 2017 18:43:21 +0200 effectflag: allow to save effect of change in obsmarkers
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 18:43:21 +0200] rev 2446
effectflag: allow to save effect of change in obsmarkers Obsmarkers lack a precious information, what are the changes between the source and the destination. This could be several thing: - The description has changed, with a amend -e for example - The parent has changed, with a rebase for example - The content has changed, with a amend for example - The meta, like the user, has change, with a amend -u for example Or any combination of them. We hijack the createobsmarkers in order to compute the modification and store the effect flag which is basically a bitfield of the changes list above and we store it in the metadata for the moment. The advantage of computing the flag just before creating the obs marker is that all commands will immediately be compatible and we can start working on the UI display of the flag. As a future optimization, the commands will be able to pass the flag directly or data to help computing them, for example amend knows if the description has changed or rebase now if the parent has changed, virtually removing the overhead. To start simple, this patch add the detection and storage of the effect flag when the description has changed. And hide it behind an experimental flag disabled by default 'experimental.evolution.effect-flags'. More flag will follow.
Fri, 19 May 2017 18:07:56 +0200 merge back with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 18:07:56 +0200] rev 2445
merge back with stable
Fri, 19 May 2017 17:48:44 +0200 readme: fix version number
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 17:48:44 +0200] rev 2444
readme: fix version number
Fri, 19 May 2017 17:34:45 +0200 next: prevent a color related crash when evolve stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 17:34:45 +0200] rev 2443
next: prevent a color related crash when evolve This was not caught by test because they run color less.
Fri, 19 May 2017 17:33:27 +0200 prune: prevent a color related crash when the working copy is moved stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 17:33:27 +0200] rev 2442
prune: prevent a color related crash when the working copy is moved This was not caught by test because they run color less.
Thu, 18 May 2017 22:40:17 -0700 evolve: adding longer aliases for olog
Rodrigo Damazio Bovendorp <rdamazio@google.com> [Thu, 18 May 2017 22:40:17 -0700] rev 2441
evolve: adding longer aliases for olog Novice users will likely find the longer versions more obvious to understand what they're doing (olog only makes sense once you already know what it does). Especially on the help page, "obslog" will be easier to find and make sense of.
Fri, 19 May 2017 11:16:22 +0200 debugobsstorestat: add markers size information
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 11:16:22 +0200] rev 2440
debugobsstorestat: add markers size information We adds some extra information about markers size in all known format.
Fri, 19 May 2017 00:15:30 +0200 packaging: bump version to 6.3.0.dev
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 00:15:30 +0200] rev 2439
packaging: bump version to 6.3.0.dev
Fri, 19 May 2017 00:10:12 +0200 merge back with stable (post-release)
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 00:10:12 +0200] rev 2438
merge back with stable (post-release)
Fri, 19 May 2017 00:14:20 +0200 packaging: bump version to 6.2.1.dev stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 00:14:20 +0200] rev 2437
packaging: bump version to 6.2.1.dev
Fri, 19 May 2017 00:11:18 +0200 Added tag 6.2.0 for changeset d4ee0274a8ef stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 00:11:18 +0200] rev 2436
Added tag 6.2.0 for changeset d4ee0274a8ef
Thu, 18 May 2017 22:20:23 +0200 merge back with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:20:23 +0200] rev 2435
merge back with stable
Thu, 18 May 2017 23:55:02 +0200 merge with future 6.2.0 mercurial-3.8
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:55:02 +0200] rev 2434
merge with future 6.2.0 No extra change were needed compared to 3.9.
Thu, 18 May 2017 23:51:10 +0200 merge with future 6.2.0 mercurial-3.9
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:51:10 +0200] rev 2433
merge with future 6.2.0 The new 'olog' command is not working with 3.9 so we skill all mentions of it in the tests. This also apply to the topic extensions.
Thu, 18 May 2017 23:35:16 +0200 merge with future 6.2.0 mercurial-4.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:35:16 +0200] rev 2432
merge with future 6.2.0 Minor unrelated output adjustements were needed.
Thu, 18 May 2017 23:12:52 +0200 merge with future 6.2.0 mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:12:52 +0200] rev 2431
merge with future 6.2.0 There are been (multiple) minor output changes.
Thu, 18 May 2017 22:26:29 +0200 packaging: prepare release 6.2 stable 6.2.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:26:29 +0200] rev 2430
packaging: prepare release 6.2
Thu, 18 May 2017 22:26:06 +0200 debian: fix email stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:26:06 +0200] rev 2429
debian: fix email
Thu, 18 May 2017 23:58:19 +0200 topic: update 'tested with' and readme stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:58:19 +0200] rev 2428
topic: update 'tested with' and readme We are compatible with Mercurial 4.0 and above
Thu, 18 May 2017 22:25:43 +0200 readme: rearrange readme before release stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:25:43 +0200] rev 2427
readme: rearrange readme before release There won't be a bugfix release (and other cleanup)
Thu, 18 May 2017 23:24:57 +0200 test: reduce output size to fight unstability stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:24:57 +0200] rev 2426
test: reduce output size to fight unstability Until `hg touch` can be more stable, we have to do this :-/
Thu, 18 May 2017 22:57:20 +0200 tests: disable blackbox for 'getid' stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:57:20 +0200] rev 2425
tests: disable blackbox for 'getid' This will significantly simplify the blackbox log.
Thu, 18 May 2017 22:42:13 +0200 compat: handle lack of 'util.timer' for pre 4.2 version stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:42:13 +0200] rev 2424
compat: handle lack of 'util.timer' for pre 4.2 version We keep compatibility with previous Mercurial version by redefining the timer when needed.
Thu, 18 May 2017 22:53:01 +0200 test: enforce color to be enabled mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:53:01 +0200] rev 2423
test: enforce color to be enabled 4.2 enable color by default and start to get used in test. So we add this to the test for previous version.
Thu, 18 May 2017 22:12:05 +0200 merge with default stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:12:05 +0200] rev 2422
merge with default
Thu, 18 May 2017 21:59:10 +0200 tests: add a test about strip with obshashrange enable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 21:59:10 +0200] rev 2421
tests: add a test about strip with obshashrange enable I've seen some traceback but I cannot reproduce them. This tests seems useful anyway.
Thu, 18 May 2017 18:35:34 +0200 obshistory: add a json test with cycles
Boris Feld <boris.feld@octobus.net> [Thu, 18 May 2017 18:35:34 +0200] rev 2420
obshistory: add a json test with cycles
Thu, 18 May 2017 18:40:20 +0200 tests: glob an absolute path
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:40:20 +0200] rev 2419
tests: glob an absolute path The ssh command path was in full and pointing the mercurial checkout of the last one who touched the test.
Thu, 18 May 2017 18:34:26 +0200 olog: document the default value
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:34:26 +0200] rev 2418
olog: document the default value We actually display the log for '.' which is useful.
Thu, 18 May 2017 18:29:28 +0200 readme: rearrange changelog content
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:29:28 +0200] rev 2417
readme: rearrange changelog content blackbox is more important than the various caches changes.
Thu, 18 May 2017 18:18:01 +0200 obshistory: rename the command to "olog"
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:18:01 +0200] rev 2416
obshistory: rename the command to "olog" The command start to look good enough to be handed out to user. We replace the old and useless "olog" alias in favor of the new command.
Thu, 18 May 2017 18:04:47 +0200 obshistory: move the command into the obshistory module
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:04:47 +0200] rev 2415
obshistory: move the command into the obshistory module The root module is far too large already.
Thu, 18 May 2017 17:40:07 +0200 obshistory: add docstring to cmddebugobshistory
Boris Feld <boris.feld@octobus.net> [Thu, 18 May 2017 17:40:07 +0200] rev 2414
obshistory: add docstring to cmddebugobshistory Add debugobshistory command documentation based on the log command documentation.
Thu, 18 May 2017 17:47:59 +0200 obshashrangecache: make sure we re-warm the cache after a reset
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 17:47:59 +0200] rev 2413
obshashrangecache: make sure we re-warm the cache after a reset This will "mitigate" the effect of dropping existing entries when new markers affect existing range.
Thu, 18 May 2017 17:35:36 +0200 obshashrangecache: precisely track affected revs when adding new markers
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 17:35:36 +0200] rev 2412
obshashrangecache: precisely track affected revs when adding new markers This will be useful when we start doing finer grained invalidation (instead of dropping all data).
Thu, 18 May 2017 14:58:22 +0200 debugobshistory: handle multiple cycles
Boris Feld <boris.feld@octobus.net> [Thu, 18 May 2017 14:58:22 +0200] rev 2411
debugobshistory: handle multiple cycles We previously handled up to one cycle only. This is now fixed.
(0) -1000 -240 +240 +1000 tip