Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 17 Jun 2018 00:15:18 +0200] rev 3861
rewind: obsolete latest successors unless instructed otherwise
To prevent the creations of divergence, we automatically mark the successors set
of the rewinded changeset as obsoleted by the rewind result. A new flag
`--as-divergence` is added to disable this behavior.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 16 Jun 2018 23:32:22 +0200] rev 3860
rewind: test rewinding an amended changesets
We are now able to rewind a simple amended changeset. For now, its current
successors has not been obsoleted and we created divergence.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 17 Jun 2018 00:57:09 +0200] rev 3859
rewind: add a message about the rewinded changesets
This helps to understand what happened.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 16 Jun 2018 23:11:52 +0200] rev 3858
rewind: add a proto version of the command
This first version focus on rewinding a single revision without care for the
consequence.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 29 Jun 2018 16:51:56 +0200] rev 3857
stablesort: make sure heads are processed in sorted order
changeset 72621094505f will fix some ordering issue in the `heads` revset so we
stabilise the output in advance.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 19 Jun 2018 23:21:54 +0530] rev 3856
evolve: move the bookmarks also when updating to successor (issue5923)
When we are on an obsolete node and does `hg evolve`, it updates to it's
sucessor, however it does not move the bookmark to the successor.
This patch adds logic to make sure we move the bookmark too.
Test change demonstrates the fix.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 19 Jun 2018 23:21:44 +0530] rev 3855
tests: add test to demonstrate issue5923
This will be fixed in upcoming patch.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 28 Jun 2018 17:26:16 +0200] rev 3854
changelog: add an entry about the new `evolve.interrupted` section
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 15 Jun 2018 00:50:17 +0530] rev 3853
evolve: make one missed error to align other error messages
Previous patches missed this error to change it to the new format. Let's align
this with all other messages raised by `hg evolve` command.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 15 Jun 2018 00:16:29 +0530] rev 3852
evolve: raise error.InterventionRequired instead of Abort when conflicts
error.InterventionRequired is a better error to raise in such cases.
Thanks to marmoute for noticing this.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 14 Jun 2018 02:58:30 +0200] rev 3851
changelog: add a changelog entry about divergence resolution
We made a lots of progress there.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 14 Jun 2018 01:39:33 +0530] rev 3850
evolve: create resolved cset on successors of current parents
While resolving content-divergence, sometimes, the parent can be obsolete and
have a successor. We should consider the successors of the parents instead of
obsolete parents as that will do something like orphan+content-divergence
resolution both at the same time which is powerful and results in a single stack
while resolving content-divergence of stacks.
The test changes demonstrates that we can now successfully evolve a content
divergent stack.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 14 Jun 2018 01:39:11 +0530] rev 3849
tests: fix a test case to not create conflicts
This is the test case where we are testing about divergence resolution of stack
of patches. If the stack is as follows:
C1 C2
| |
B1 B2
| |
A1 A2
\/
base
And A1-A2, B1-B2 and C1-C2 are content-divergent, and merging A1-A2 results in
conflicts.
Now if you resolve conflicts and continue resoling B1-B2, the conflicts of A1-A2
will still be there. We need somehow to understand the work we has done and not
create conflicts again.
To test the evolution functionality for now, we make sure conflicts does not
occur.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 14 Jun 2018 01:06:12 +0530] rev 3848
evolve: introduce a resolutionparent variable and store it in evolvestate
This patch introduces a resolutionparent variable which will be the parent of
final changeset after resolving content-divergent changesets.
Till now, the parent is always the parent of one of the divergent node, but now
in upcoming cases, it can be a successor of both the parents of divergent nodes.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 13 Jun 2018 18:08:57 +0530] rev 3847
evolve: introduce a dirstatedance() fn to fix dirstate after parent change
This patch introduces a dirstatedance() function which will be used after fixing
the dirstate when we change parents using repo.dirstate.setparents().
Look at docs added for more details.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 13 Jun 2018 17:15:10 +0530] rev 3846
evolve: create a new commit instead of amending one of the divergents
This patch changes the behavior of evolve command while resolving
content-divergence to create a new commit instead of amending one of the
divergent ones.
In past, I have made this change, backed out this change and now today again I
am doing this change, so let's dive in some history.
Using cmdrewrite.amend() was never a good option as that requires hack to delete
the evolvestate and also gives us less control over things. We can't make the
commit on top of different parents as that of content-divergent ones. Due to all
these, I first made this change to create a new commit instead of amending one.
But, after few days, there was flakiness observed in the tests and turned out
that we need to do some dirstate dance as repo.dirstate.setparents() does not
always fix the dirstate. That flakiness was a blocker for progress at that time
and we decided to switch to amend back so that we can have things working with
some hacks and we can later fix the implementation part.
Now, yesterday while tackling resolving content-divergence of a stack which is
as follows:
C1 C2
| |
B1 B2
| |
A1 A2
\/
base
where, A1-A2, B1-B2, C1-C2 are content-divergent with each other. Now we can
resolve A1-A2 very well because they have the same parent and let's say that
resolution leads to A3.
Now, we want to resolve B1-B2 and make the new resolution commit on top of A3 so
that we can end up something like:
C3
|
B3
|
A3
|
base
however, amending one of the divergent changesets, it's not possible to create a
commit on a different parent like A3 here without some relocation. We should
prevent relocation as that may leads to some conflicts and should change the
parent before committing.
So, looking ahead, we can't move with using amend as still using that we will
need some relocation hacks making code ugly and prone to bad behaviors, bugs.
Let's change back to creating a new commit so that we can move forward in a good
way.
About repo.dirstate.setparents() not setting the dirstate, I have researched
yesterday night about how we can do that and found out that we can use
cmdrewrite._uncommitdirstate() here. Expect upcoming patches to improve the
documentation of that function.
There are lot of test changes because of change in hash but there is no behavior
change. The only behavior change is in test-evolve-abort-contentdiv.t which is
nice because creating a new commit helps us in stripping that while aborting.
We have a lot of testing of content-divergence and no behavior change gives
enough confidence for making this change.
I reviewed the patch carefully to make sure there is no behavior change and I
suggest reviewer to do the same.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 12 Jun 2018 23:20:54 +0530] rev 3845
evolve: always order the revs to be evolved
The current code only order the revs if we are resolving orphans and not in
other case. The ordering is important when we pass --all and tackle multiple
occurence of the same instability.
Let's order the revs for each instability. There are enough test coverage of
phase-divergence and content-divergence that I feel confident doing it because
none of the test changed.
The change in test-evolve-content-divergent.t demonstrates the indeed ordering
helped.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 12 Jun 2018 21:13:02 +0530] rev 3844
tests: add test of resolution of content-divergent stacks
This patch adds a test of resolution of content-divergence stacks where a series
of changesets get mutated as two different series resulting in whole
content-divergent stacks.
As the tests shows, we are not processing the changesets in right order which
needs to be fixed first.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 12 Jun 2018 19:00:12 +0530] rev 3843
evolve: improve error messages when conflicts occur
This patch improves the error messages when conflicts occur.
First, we drop the line 'evolution failed', that is not the best line we can
show and evolution didn't failed, it's just interrupted by the conflicts and
when user will run `hg evolve --continue`, things will be fine. I still remember
when I first saw 'evolution failed', I got a bit scare as am I in a recoverable
position or not. So let's drop this scary line.
Second, we replace the error messages to say `resolve conflicts and see
help-topic`. The help topic was added recently and documents all the three flags
very well. Addition of tests also showed that all the three flags works fine
with all the three instability type. So we should advertise them more.
Third, we now raise the error with our error message rather than raising
MergeFailure and having evolution related text in hint or stderr above. This
increase the focus on the error message we want to show.
After this patch, I think error messages by evolve in case of conflicts will be
same in every case.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 12 Jun 2018 04:01:19 +0530] rev 3842
evolve: point to `hg help evolve.interrupted` while resolving content-div
Recent test additions shows that --abort and --stop works well while resolving
content-divergence and we should advertise them. This patch does so by pointing
to evolve.interrupted help topic.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 12 Jun 2018 03:29:13 +0530] rev 3841
tests: add test about aborting content-divergence when multiple parents
This patch adds tests for --abort flag of hg evolve command when we are
resolving content-divergence which are on different parents and parent of one of
them is the gca of both of them.
The tests shows that we are doing good and we should advertise the flag during
conflicts.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 13 Jun 2018 15:47:19 +0530] rev 3840
CHANGELOG: add an entry about the --update flag
Since --update is still the default, we make the entry about --no-update.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 06 Jun 2018 04:29:05 +0530] rev 3839
evolve: show unfinished information in `hg status -v` (issue5886)
`hg status -v` shows information about unfinished states or `hg status` shows it
when `commands.status.verbose=True` is set.
Before this patch, information about interrupted evolve does not show up because
evolve does not resgiters in cmdutil.STATES. This patch make sure we register
evolve related information there.
There has been an idea to unify cmdutil.unfinishedstates and cmdutil.STATES
which needs some work and the resulting state does looks a bit complicated. So
till the time we unify them, let's fix this bug by registering in
cmdutil.STATES.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 12 Jun 2018 13:58:14 +0200] rev 3838
style: drop a (commented) debug print
Left-over from 4dcf87849f9d.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 10 Jun 2018 20:58:55 +0530] rev 3837
tests: update tests output with changes in d0abd7949ea3 in core hg
CORE-TEST-OUTPUT-UPDATE: d0abd7949ea3
CORE-TEST-OUTPUT-UPDATE: 1e9c357d3ddf
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 12 Jun 2018 10:40:57 +0200] rev 3836
branching: merge with stable
Merging with the new 8.0.1 release.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Jun 2018 23:31:44 +0530] rev 3835
Added tag 8.0.1 for changeset 0887c30255a1
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Jun 2018 23:30:24 +0530] rev 3834
packaging: prepare for 8.0.1 release
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 11 Jun 2018 20:24:45 +0200] rev 3833
changelog: add a couple of missing entry
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Jun 2018 20:17:56 +0530] rev 3832
evolve: strip the extra obsmarkers if any on `hg evolve --abort`
Previous patches started storing some obsmarkers which needs to stripped during
`evolve --abort` which can't be stripped by stripping the new evolved changesets
because they point to a node which existed before the evolution was performed.
This patch adds logic to strip those obsmarkers by finding their indices in the
obsstore and then stripping them.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Jun 2018 20:13:36 +0530] rev 3831
evolve: store the obsmarkers to be deleted in evolvestate
Sometimes, we don't create a new node and obsolete one of the old node in favour
of an existing node. When user calls, `hg evolve --abort`, we need to strip that
obsmarker to go back in the same old state. The obsmarker created for new node
are stripped when the new nodes are stripped.
This patch start storing such obsmarkers in the evolvestate so that we can delete
them later if required. Right now we just store successsor and predecessor
information, we might need a better obsmarker serialization techinque in future
to make it more robust.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Jun 2018 15:52:11 +0530] rev 3830
evolve: store obsmarkers to be deleted in evolvestate
There are operations which don't create a new node rather they just obsolete one
of the unstable node in favour of existing one. In such cases if a further
resolution leads to conflicts and user calls `evolve --abort` or `evolve
--stop`, we might need to delete that obsmarker. So let's store such obsmarkers
in the evolvestate.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Jun 2018 15:38:43 +0530] rev 3829
evolve: factor out logic to merge branches in separate function
This patch moves the logic to merge branches while resolving content-divergence
to a separate function.
This makes code clear and better to understand.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Jun 2018 01:00:57 +0530] rev 3828
tests: add more test of --stop while resolving content-divergence
This tests the --stop flag when conflicts occur while relocating one of the
divergent changesets.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Jun 2018 00:47:28 +0530] rev 3827
evolve: strip the relocation commit on `hg evolve --stop`
While resolving content-divergence on multiple parents, we relocate one of the
commit on the parent of another one and then merge the divergent changesets.
Merging can leads to conflicts, and if user does `hg evolve --stop`, we need to
strip that relocated changeset too! This patch does that.
Test changes demonstrates the fix.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Jun 2018 00:43:39 +0530] rev 3826
evolve: declare updated and pctx variables in stopevolve()
They will used in next patch.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 10 Jun 2018 22:52:11 +0530] rev 3825
evolve: store the old other divergent node after relocation in evolvestate
When the content-divergent changes are on different parents and we relocate of
the node to the parent of another one, we get a new other-divergent node. We
still need to store the older other-divergent in evolvestate so that we can use
that information.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 10 Jun 2018 22:42:57 +0530] rev 3824
evolve: factor out logic for --stop flag in separate function
This will make code clean
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 10 Jun 2018 22:38:08 +0530] rev 3823
tests: add test for --stop flag when resolving multiparents content-div
This patch adds a test for --stop flag when we are in an interrupted
content-divergent resolution which have multiple parents. Conflicts happen we
merge the divergent changesets after relocation. The test shows that we
need to strip the relocated changeset.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 10 Jun 2018 20:35:48 +0530] rev 3822
evolve: move logic to continue interrupted content-div resolution to new fn
Each of the other type has defined their own function to continue/complete the
interrupted resolution. We take out the logic for content-div resolution too in
a separate function to make the top level function looks clean.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Jun 2018 01:12:12 +0530] rev 3821
evolve: rename help topic evolve.interrupted-evolve to evolve.interrupted
`evolve.interrupted-evolve` has the word evolve twice. Now that this help topic
is a part of evolve command, evolve.interrupted will mean the interrupted evolve
command only.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 09 Jun 2018 00:15:27 +0530] rev 3820
packaging: update tested-with statements in evolve and topic
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 09 Jun 2018 00:12:08 +0530] rev 3819
CHANGELOG: mention about 4.6.1 compatibility
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 08 Jun 2018 22:52:53 +0530] rev 3818
test-compat: merge mercurial-4.4 into mercurial-4.3
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 08 Jun 2018 22:52:52 +0530] rev 3817
test-compat: merge mercurial-4.5 into mercurial-4.4
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 08 Jun 2018 22:52:51 +0530] rev 3816
test-compat: merge stable into mercurial-4.5
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 22 May 2018 23:51:57 +0530] rev 3815
utility: use ui.interactive() instead of checking config value
Before this patch, the rev selection prompt which pops up in case of ambiguity
to ask user to select a rev used to check the config value of ui.interactive
which can is by default set to None.
We should use ui.interactive() instead which is more smart in such cases.
Thanks to martinvonz for suggesting this.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 08 Jun 2018 19:48:53 +0530] rev 3814
CHANGELOG: add couple of entries about things fixed
We are preparing for a release!
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 08 Jun 2018 17:36:28 +0530] rev 3813
next-prev: always respect the --merge flag
An earlier bug fix series which started respecting commands.update.check
introduced a bug in which --merge was not respected sometimes. This patch fixes
that behavior by passing updatecheck as 'none' to hg.updatetotally() if --merge
is passed which is similar to what `hg update` does.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 08 Jun 2018 18:32:48 +0530] rev 3812
next-prev: add tests showing --merge not respected in some cases
This patch adds tests which show that --merge is not respected when you set
commands.update.check to any value.
This is a bug I wrote few days ago and will fix it in next changeset.
I like this process of writing bugs and fixing them.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 22:59:39 +0530] rev 3811
evolve: store the evolvestate if relocation results in conflicts
We missed storing the evolvestate on disk when relocation lead to conflicts. We
need to store it to grab information to continue or abort or stop the evolve.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 22:45:54 +0530] rev 3810
tests: add more test of resolution of content-divergent changesets
This patch adds test of resolution of content-divergent changesets when
relocation is required and it leads to conflicts. The test shows that we are not
doing the right thing. This will be fixed in upcoming patches.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 18:18:10 +0530] rev 3809
evolvestate: store info about relocation while resolving content-divergence
While resolving content-divergence when they are on different parents, we
relocate one of the node to parent of another one and this can lead to conflicts
sometimes. So we need to store information about that state in evolvestate so
that we can use that when user does `hg evolve --continue` or `--stop` or
`--abort`.
Now that we make sure, we store the new other node in evolvestate, we fix the
behavior of handling the relocated commit and merge the right changesets.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 18:13:54 +0530] rev 3808
evolve: factor out logic to merge content divergent csets in separate fn
This will help us in reusing the logic if we need to while doing evolve
--continue.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 20:27:03 +0530] rev 3807
evolve: commit the transaction if conflicts occur while merging content-div
Yes, let's commit the transaction in case conflicts occur. Yes, this is what
unshelve does and this is one of the reasons we don't like unshelve.
Previous patches added support for resolving content-divergence when they are on
different parents with parent of one being the gca. In such cases, we relocate
one of the divergent commit to the parent of another one.
All the relocation stuff and merging divergent changeset stuff happens in a
single transaction, so if there are conflicts while merging, we abort and the
transaction rollsback and our relocated commit is not applied after abort.
We don't want to process the relocation because that can lead to conflicts and
we will have dirty wdir because of resolving conflicts.
So, we commit the transaction when merging results in conflicts to make sure if
relocation happened, we commit that.
This fixes the absence of relocation commit found in previous patch and uncover
a new bug about handling of relocated commit. Upcoming patch will fix it.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 15:54:32 +0530] rev 3806
tests: add tests for resolving content-divergence when different parents
This patch adds more tests for cases when we try to resolve content-divergence
when they are on different parents.
The last test shows the we are somehow missing the relocated commit in
interrupted transaction. This will be fixed in next patch.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 01 Jun 2018 19:52:06 +0530] rev 3805
evolve: implement resolution of content-divergence when on differet parents
This patch implements the basic version of resolution of content-divergence
changesets when they are on different parents but one of the parent is gca of
both the different parents.
The functionality first relocates the divergent changeset which was left behind
and then resolves the content-divergence like it resolves in normal cases.
This is a very basic implementation because it still does not work on
interrupted evolution. Test changes in this patch shows the basic functionality
working. The output of dry-run is also required to be tweaked in such cased.
Upcoming patches will add more tests and will improve the implementation to work
during conflicts too.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 01 Jun 2018 19:57:19 +0530] rev 3804
tests: add tests for resolving content-divergence with parent change
This patch adds a new test file test-evolve-content-divergence.t which tests the
resolution of content divergence when the divergent changesets does not have the
same parents.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 06 Jun 2018 03:49:17 +0530] rev 3803
CHANGELOG: add an entry about fixing issue5877
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 06 Jun 2018 03:26:47 +0530] rev 3802
evolve: pop up editor if conflicts occur while merging commit messages
Last patch added support for merging commit messages while resolving content
divergence. In case of conflicts we fallback to one of the divergent commit
messages.
After this patch, we will pop up an editor where user has to resolve the
conflicts in the commit messages and then continue.
Tests are added for this. We need to fix handling in test-sharing.t to use
HGEDITOR to fix conflicts and pass the new commit message.
Future improvement can be that we should respect HGMERGE while merging commit
descriptions too.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 04 Jun 2018 01:28:02 +0530] rev 3801
evolve: merge commit messages while resolving content-divergence (issue5877)
While resolving content-divergence, there can be divergence in commit messages
too which should be resolved.
This patch uses the hg's internal merge API's to merge commit messages of
divergent changesets with predecessor as the base.
In case of conflicts, we fallback to divergent's commit message which should be
changed in future. We should pop up the editor with the commit message and the
conflict markers and let user fix that.
Tests are added for the functionality added.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 06 Jun 2018 01:19:36 +0530] rev 3800
evolve: move if-else block under the right block
the index related if-else should be only executed when all three base, divergent
and other have different branch names.
I coded this last night and mistakenly mis-indented it. Caught when I was adding
more tests.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Jun 2018 22:02:24 +0530] rev 3799
tests: make sure we don't result in commit messages conflict
Upcoming patches will introduce functionality of merging commit messages while
resolving content divergence which can lead to conflicts.
We don't want to test the conflicts scenario here, so let's make sure there are
no conflicts of commit messages in this test.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Jun 2018 21:02:09 +0530] rev 3798
tests: don't use mkcommit shell function in test-divergent.t
Upcoming series will start merging commit descriptions while resolving
content-divergence. This tests are here to test the basics of content-divegrence
resolution and we should not be testing much of commit description merge here.
Replacing mkcommit function with normal hg calls will help us decide on the
commit messages ourselves and prevent conflicts while merging commit messages.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 06 Jun 2018 14:35:36 +0200] rev 3797
evolve: remove duplicated documentation
File saving failure…
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 06 Jun 2018 04:09:49 +0530] rev 3796
evolve: show `hg help evolve.interrupted-evolve` in error when conflicts
The help list various flags which you can use during interrupted evolve
resolution and description about what they do. This will be very helpful for
user on how to continue an interrupted evolve.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 01:11:59 +0530] rev 3795
evolve: add a help topic `Interrupted-Evolve`
This help topic contains description on how the various flags work during
interrupted evolve. This help topic will be included in error message during
interrupted evolve in next patch.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 05 Jun 2018 03:37:15 +0200] rev 3794
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 05 Jun 2018 03:36:40 +0200] rev 3793
changelog: fix version number error
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 02:12:14 +0530] rev 3792
evolve: return the new node formed only as the replacement
sometimes, the the other content divergent changeset is obsoleted in favour of
the local divergent changeset in which case we should not store that as a
replacement because `hg evolve --abort` will strip that changeset. Let's make
sure we return the newnode only if formed.
The test results shows that we are still not 100% accurate as we need to strip
an obsmarker.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 17:04:20 +0530] rev 3791
tests: add more test of --abort flag for content-divergence resolution
This patch adds test when we resolve multiple content-divergence changesets at
once and resolution fo first content-divergence does not form new commits,
resolution of second one leads to conflicts.
As the output shows, we are wrongly stripping a changeset here, which should be
fixed in next patch.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 04 Jun 2018 04:03:02 +0530] rev 3790
evolve: prompt user for branch selection while resolving content-divergence
When resolving content-divergence, there can be case when both the
content-divergent changesets are on different named branches. In that case, we
are not sure which branch should the resolution commit should be on.
This patch adds logic to prompt user to choose the branch which the resolution
commit should be on and then creates the new resolution commit on that branch.
This also adds a new test file which have tests for the branch selection feature
we have added.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Jun 2018 03:51:01 +0530] rev 3789
evolve: pass the base revision in _completecontentdivergent()
We need the base revision to merge commit messages, branches and more stuff.
Let's make sure we have that by passing into the function which completes the
divergence resolution.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Jun 2018 03:49:49 +0530] rev 3788
evolve: store the base of content-divergents in evolvestate
We need the base changeset for merging commit messages, branches. Let's store it
in evolvestate.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Jun 2018 00:53:21 +0530] rev 3787
evolve: use cmdrewrite.amend() instead of creating a new commit
This patch backs out changeset 88601e1cd5d8.
We replaced cmdrewrite.amend() with creating new commit because using amend(), a
high level function was not good and creating a new commit gave us more control
over things.
**HOWEVER** to get more control, you need to get arrange all the pieces together
perfectly. Creating a new commit, the existing logic has some bugs around
dirstate handling, the `repo.dirstate.setparents()` call especially. Sometimes
this fixes the dirstate correctly sometimes not.
As Pierre-Yves David said, "Having a "clumsy" implementation with the right
behavior is usually a good first step. So having an amend based implementation
seems like a good first step.", let's take a step back and get back using amend
so that we can have a correct basic implementation which is bug free.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 01:59:41 +0530] rev 3786
corecompat: update the tests output to show phase update summary
eb9835014d20 in core added support to transactions to show a summary on the
phase changed during that transaction. Due to this, couple of tests output needs
to be updated. This patch does that.
While realeasing evolve, this patch should be backed out on branches where
hg<=4.6.
CORE-TEST-OUTPUT-UPDATE: eb9835014d20
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 03:24:43 +0530] rev 3785
CHANGELOG: add an entry about issue 5808 being fixed
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 03:21:25 +0530] rev 3784
next-prev: replace the error hint to mention about `--merge` flag
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 03:13:47 +0530] rev 3783
tests: add tests for conflicts while respecting commands.update.check
This patch adds tests to check that we don't run into conflicts while respecting
commands.update.check.
The error message now does not show the hint about --merge option which we
should fix.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 02:37:13 +0530] rev 3782
next: respect `commands.update.check` config option in `hg next` (issue5808)
`commands.update.check` config option determines what level of checking should
be done when we update to another revision. When we set this config option to
`noconflict`, it updates your working directory to a specified revision only
when there will be no conflicts which is a very nice behavior.
This patch adds logic to respect the config option so that we can have that nice
behavior with `hg next` too.
It turns out, we just needed to use hg.updatetotally() and add some cases to
check config option.
Right now, we only respect the config if value is set to `noconflict`. Otherwise
we fallback to the default behavior.
This is a part of fixing issue5808. Test changes demonstrate the fix.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 02:36:24 +0530] rev 3781
prev: respect `commands.update.check` config option in `hg prev` (issue5808)
`commands.update.check` config option determines what level of checking should
be done when we update to another revision. When we set this config option to
`noconflict`, it updates your working directory to a specified revision only
when there will be no conflicts which is a very nice behavior.
This patch adds logic to respect the config option so that we can have that nice
behavior with `hg prev` too.
It turns out, we just needed to use hg.updatetotally() and add some cases to
check config option.
Right now, we only respect the config if value is set to `noconflict`. Otherwise
we fallback to the default behavior.
This is a part of fixing issue5808. Test changes demonstrate the fix.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 02:50:55 +0530] rev 3780
tests: add test demonstrating issue5808
This patch adds test showing that `next` and `prev` does not respect the
`commands.update.check` config option, particularly when set to `noconflict`.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 02:26:19 +0530] rev 3779
next: bail out early in `hg next --evolve` if dirty wdir
This patch adds logic to bail out early when --evolve is passed with next
command and the working directory is dirty.
This will help us in preventing the message saying `do you want --merge` which
is useless and misleading when `--evolve` is passed.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 02:24:28 +0530] rev 3778
tests: add test of `hg next --evolve` with dirty working directory
I was testing some output change to `hg next --evolve` in dirty working
directory and found that we don't have any test for that.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 03:35:22 +0530] rev 3777
CHANGELOG: add an entry about fixing issue5897
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 27 May 2018 02:32:58 +0530] rev 3776
evolve: fix `hg abort` when hg next --evolve leads to conflicts (issue5897)
Before this patch, if you do `hg next --evolve` and end up having conflicts and
then you try `hg abort`, it will throw a KeyError. This patch fixes that.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 30 May 2018 00:34:35 +0530] rev 3775
tests: add a test demonstrating issue5897
When conflicts are caused due to `hg next --evolve`, `hg evolve --abort` breaks!
This patch adds test to demonstrate that. This will be fixed in next patch.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 17:50:02 +0530] rev 3774
evolve: add an `--update` flag to `hg evolve` command
This patch adds a new `--update` flag which defaults to True. The update flag
updates the working directory to the head of evolved revisions after `hg evolve`
command.
This flag can be used to not update your working directory after `hg evolve`
which has been one of the biggest feature request from fig team at Google. To
not update your working directory, the user can do `hg evolve --no-update`.
If the working directory get obsoleted by evolve command, it will update to the
successor.
This patch also adds some basic tests for the flag introduced.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 02:02:11 +0530] rev 3773
tests: add tests for testing --abort while content-divergence resolution
This patch adds a new test file with a very basic test of `--abort` on an
interrupted evolve which was resolving content-divergence. Upcoming patches will
add more rigourous tests.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 00:58:50 +0530] rev 3772
evolve: fix storage of replacements and temprevs node in evolvestate
The _completephaseivergent() was not respecting rules on how to store the new
node ids created in evolvestate. The rules are:
* store the temporary relocated commits in temprevs
* store the final new commit in replacements
This patch make sure we follow the above rules and also use the return value
returned by _resolvephasedivergence().
The tests change demonstrates that we are all good now.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 00:58:35 +0530] rev 3771
tests: add more tests related to aborting while resolving phase-divergence
The tests shows the something is still broken related to abort while resolving
phase-divergence which will be fixed in upcoming patches.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 23 May 2018 12:16:24 +0200] rev 3770
topic: suggest to clear a topic that becomes empty
We add a hint suggesting "hg topic --clear" when a topic becomes empty.
This usually happens when all its changesets get public, that is when
the user does a 'phase -p' or when they pull from a server. To
discriminate relevant cases for which we should display the hint (and
typically exclude explicit 'hg topic --clear' operation), we look for
the transaction "type" to only consider 'phase' or 'push' transaction.
In the latter case, the transaction name is not simply 'push-response'
but it also included the remote URL so we need to match on string
content.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 23 May 2018 11:37:37 +0200] rev 3769
topic: display a hint pointing at help when a topic becomes non-empty
This is an attempt at avoiding "mistakes" by new users of topics when
they pull a topic and publish its changesets while being checked out. In
this case, the topic will become empty but still be active; however, if
this is a "foreign" topic, the user will not likely want to keep it
active for the next commit operation. So we add a hint message pointing
at general help of "topics" command so that they can eventually do
something and learn about "hg topics --clear".
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 24 May 2018 18:57:46 +0200] rev 3768
branching: merge with compat fix on default
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 01:50:26 +0530] rev 3767
evolve: add compat for repair.stripbmrevset which is moved to scmutil
This patch adds compatibility logic for repair.stripbmrevset() which is moved to
scmutil as bookmarkrevs().
This fixes test-prune.t failure.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 23 May 2018 11:18:14 +0200] rev 3766
evolve: update the readme with more information about contribution
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 23 May 2018 11:03:31 +0200] rev 3765
topic: dedent items about publishing behavior in docstring
Also change item bullets from '#' to '*'.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 23 May 2018 11:00:11 +0200] rev 3764
topic: use preformatted block for config snippets documentation
We add :: markers, empty line and properly indent blocks where needed.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 23 May 2018 11:09:37 +0200] rev 3763
tests: add a test for "hg help -e topic"
Currently, some configuration snippets do not render well; we'll fix
this in forthcoming changesets.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 23 May 2018 01:24:02 +0200] rev 3762
branching: merge with stable
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 22 May 2018 21:33:50 +0530] rev 3761
content-div: add test showing `--stop` works during interrupted resolution
This patch adds a test showing that the --stop flag of `hg evolve` works well
during interrupted content-divergence resolution.
The --stop flag now works with all the three different type of instability
resolution very well and we should advertise it more.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 23 Apr 2018 14:48:53 +0530] rev 3760
evolve: create new commit while resolving content-divergence
Before this patch, we used to amend one of the content-divergent changes with
the changes from the merge. Creating a new commit will certain advantages like
letting user enter a commit message, showing user the new merge diff before
commiting the content-divergent resolution and give us more control in the
implementation part.
The reason amend was used initially was just because it was easy. There are some
tests update due to change.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 22 May 2018 20:33:42 +0530] rev 3759
content-divergence: store the resolved revs in evolvestate['replacements']
The support for continuing a conflicted content-divergence resolution was added
some time ago. That support lacked storing of the resolved rev in the
evolvestate['replacements'] which marks the node as resolved and does not try to
resolve that node again.
Since we didn't store, the resolution, processes the same node again. This patch
makes sure we store the information in evolvestate that a certain
content-divergent node is resolved to prevent pre-processing it again.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 22 May 2018 23:51:57 +0530] rev 3758
utility: use ui.interactive() instead of checking config value
Before this patch, the rev selection prompt which pops up in case of ambiguity
to ask user to select a rev used to check the config value of ui.interactive
which can is by default set to None.
We should use ui.interactive() instead which is more smart in such cases.
Thanks to martinvonz for suggesting this.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:46:20 +0530] rev 3757
evolve: make `--abort` strip the temporary revs created during resolution
During divergence resolution, `hg evolve` created temporary relocation commits
which needs to be stripped off during `hg evolve --abort` to get back to the
same state where we were. Previous patch added a new list temprevs to be stored
in evolvestate.
This patch starts storing the temp relocated node created during
phase-divergence resolution in evolvestate and make sure we consider stripping
it too while `hg evolve --abort`.
The test changes demonstrate the fix. Now we are sucessfully aborting a
phase-divergence resolution.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:43:23 +0530] rev 3756
evolve: store a list of temprevs in evolvestate
There are temporary revisions which are created as a part of divergence
resolution which needs to be stripped off if user runs `hg evolve --abort`. We
need to save the nodeids of those temporary revisions in the evolvestate.
The temprevs list will help in the above mentioned use cases.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:36:14 +0530] rev 3755
evolve: check for None before adding in set of revisions to strip
After previous patch, replacements can contain None. Let's make sure we don't
add None to the revisions to strip during `hg evolve --abort`
The test changes demonstrate the usefulness of this and the previous patch. Now
abort is working and public changesets are not a problem.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:33:14 +0530] rev 3754
evolve: return the new replacement node to be stored in evolvestate
While resolving phase-divergence, we can end up obsoleting the phase-divergent
commit in favor of the public commit. Before this patch we return the node of
public commit to store as a replacement of the phase-divergent commit.
The above will not cause any problem till the time we use `hg evolve --abort` on
an interrupted evolve which tries to strip the replacement nodes because it
thinks that the replacements nodes are the ones which are created during the
resolution and are new.
Since we will be stripping a public node, `evolve --abort` will error out saying
cannot strip public changeset, unable to abort evolve which is bad.
We should make sure, replacements should only consist of new nodes formed. If
the instablity is resolved by obsoleting in favour of old changeset, we should
not store the old changeset in replacements in evolvestate.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:39:38 +0530] rev 3753
evolve: don't make values of replacements dict lists
There was inconsistency in code base related to the values stored in
replacements dict in evolvestate. At some places we store a list, at some places
we just store the nodeid. Let's make sure we store only the nodeid, not a list.
If there are cases, when there are multiple replacements or changesets created
during resolution, later patch will introduce storing temprevs in evolvestate
which should be used.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:41:08 +0530] rev 3752
tests: add a test file `--abort` flag while resolving phase-divergence
This patch adds a new test file test-evolve-abort-phasediv.t which will contain
tests for `hg evolve --abort` flag while resolving phase-divergence.
There is a case in this test which does not work right which will be fixed in
upcoming patches.
Martin von Zweigbergk <martinvonz@google.com> [Tue, 15 May 2018 22:17:27 -0700] rev 3751
evolve: pass revisions as strings to commands.*()
It's usually fine to pass integer revisions to e.g. commands.update(),
but when directaccess is enabled, it attempts to parse it a revset,
which fails.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 01:27:13 +0530] rev 3750
tests: rename test-evolve-abort.t to test-evolve-abort-orphan.t
We renamed the test file because it contains all the cases related to orphan
resolution. Now we care about divergence resolution too and hence we must have
separate specific test files for each type.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 21 May 2018 16:56:52 +0200] rev 3749
branching: merge with branch for stable
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 16:25:29 +0200] rev 3748
compat: update obshashrange test output
Mercurial core bfe8ef6e370e seems to have changed the order of some messages.
Simply accept the change in the test file.
CORE-TEST-OUTPUT-UPDATE: bfe8ef6e370e
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 14:56:51 +0200] rev 3747
test: update to new outputs
Mercurial core ea63a2004d09 update the hidden changeset warning during update
after the effective update.
CORE-TEST-OUTPUT-UPDATE: ea63a2004d09
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 13:07:49 +0200] rev 3746
compat: fix obslog with Mercurial 4.6+
Mercurial core 3fe1c9263024 removed the diffopts attribute on
changesetprinter. Backport consuming diffopts in the constructor for old
versions of changesetprinter and update the non-graph code to extract the
patch option and pass it directly.
Faheem Mitha <faheem@faheem.info> [Sat, 19 May 2018 18:26:36 +0530] rev 3745
debian: add line to clean-docs target to delete additional docs file
Martin von Zweigbergk <martinvonz@google.com> [Mon, 14 May 2018 15:25:38 -0700] rev 3744
amend: use context manager for locks (issue5887)
Martin von Zweigbergk <martinvonz@google.com> [Thu, 10 May 2018 21:37:28 -0700] rev 3743
evolve: point to '--abort' in verbose status message
f6979d64b9fb (evolve: point to '--abort' in error message, 2018-04-22)
changed "hg update -C ." to "hg evolve --abort" in error
messages. This commit makes the same change in the verbose status
message (the one that warns about unfinished evolve).
There's still one mention "hg update -C" in our codebase. That's after
"hg evolve --content-divergent" fails, but I don't think "hg evolve
--abort" works in that case (yet?).
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 22 Apr 2018 20:14:42 +0530] rev 3742
evolvecmd: add comments and new lines in content-divergence handling logic
I have visited this logic three times in last 10 days and I have to re-read the
whole code to make sure I don't miss any part. Adding comments will help
understanding the code in better and fast way.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:18:54 +0530] rev 3741
evolve: show cset hash in "merging conetnt-divergent changeset"
While I was here I also mae de it repo.ui.status() instead of repo.ui.note() to
align the behavior with rest of the messages.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:14:41 +0530] rev 3740
evolve: show cset hash in "update to local conflict" message
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:11:29 +0530] rev 3739
evolve: use hg.updaterepo() instead of hg.update() to hide stats
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:04:18 +0530] rev 3738
evolve: fix the conflicts error message during content-divergence resolution
Before last patch, we didn't had an automated way to continue an interrupted
content-divergence resolution and we used to show a very long error message on
how to continue manually.
This patch replaces that long error message with nice small message which tells
how to continue and how to abort. We still show `hg update -C .` to abort as we
need to test and make `--abort` work in case of content-divergence.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:51:56 +0530] rev 3737
evolve: add logic to continue interrupted content-divergence resolution
We continue the interrupted content-divergence using the logic to complete
content-divergence which we refactored in it's own function few patches ago.
We had to delete evolvestate file before using cmdutil.amend() because otherwise
we can't use the function. This leads to a hack which deletes the evolvestate
file, we may want to not to use the high level API function here. Also we had to
pass evolvestate also to _completecontentdivergent function because of this.
This patch also, adds a test which demonstrates that the logic works fine.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:48:36 +0530] rev 3736
evolve: store the evolvestate file when encountering conflicts
This patch makes `hg evolve` store the evolvestate file when it encounters merge
conflicts while resolving content-divergence.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:13:29 +0530] rev 3735
evolve: take out logic to complete phase-divergence in separate fn
This patch takes out the logic to complete the content-divergence resolution to
it's own separate function so that we can reuse it in case of interrupted
resolution.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 17:54:01 +0530] rev 3734
evolve: store divergent nodes in evolvestate when resolving content-divergence
We need to store the divergent nodes in evolvestate so that we can continue an
interrupted phase divergence resolution.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 02 May 2018 11:59:06 +0200] rev 3733
branching: merge stable into default
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 28 Apr 2018 18:44:07 +0530] rev 3732
tests: add test showing `hg evolve --stop` works fine with phase-divergence
This patch adds a new test file which contains test demonstrating that `--stop`
flag works well while resolving phase-divergence using `hg evolve`.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 28 Apr 2018 18:03:32 +0530] rev 3731
tests: rename the test file to add 'orphan' in the name
test-evolve-stop.t contains test for `hg evolve --stop` for orphan resolution
only. We also need to test the flag while resolving divergence. It will be good
if we have a test file for each type of instability.
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:28:34 +0800] rev 3730
tests: test that `hg obslog wdir()` aborts with a useful message
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:19:45 +0800] rev 3729
obshistory: make obslog work when a commit doesn't have any description
This logic is taken from logcmdutil.changesetprinter class. It checks that
commit description is not empty before extracting the first line (before this
patch it would try to index an empty list).
Stripping description also makes obslog behave more like regular log when there
are trailing/leading whitespaces.
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:14:10 +0800] rev 3728
obshistory: use a more appropriate type for obslog entries
cand is actually a regular changeset and not 'M' (graphmod.MISSINGPARENT). And
'M' is only used for graph edges, but cand is drawn as a graph node.
Visually there's no effect, but the code makes more sense this way.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:19:13 +0100] rev 3727
packaging: mark as development version
This help avoiding confusion when installing from source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:18:19 +0100] rev 3726
branching: merge with latest release
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:16:35 +0100] rev 3725
packaking: mark as development version
This avoid confusion when installing from source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:36 +0100] rev 3724
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:35 +0100] rev 3723
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:34 +0100] rev 3722
test-compat: merge stable into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:14 +0100] rev 3721
Added tag 8.0.0 for changeset 116cdd8c102a
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:02:43 +0100] rev 3720
packaging: update version number
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 13:55:52 +0100] rev 3719
packagin: update `tested-with` statement
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 13:49:00 +0100] rev 3718
changelog: mention 4.6 compatibility
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 11:55:49 +0100] rev 3717
Changelog: pre-version gardening
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 01:58:45 +0100] rev 3716
testcompat: update output for Mercurial 4.3
Lets of minor update + one major update to tests/test-evolve-phase-divergence.t
since all hashed chance (different instability name).
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:23:00 +0200] rev 3715
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:11:10 +0200] rev 3714
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 08:57:18 +0100] rev 3713
testcompat: revert output change from new capabilities
This new capabilities is 4.6 only.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 08:42:47 +0100] rev 3712
testcompat: revert output change from 54a469cd5b26
These are 4.6 only changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 08:41:57 +0100] rev 3711
testcompat: revert output change from 1de6ba0ac6d7
These are 4.6 only changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:10:26 +0200] rev 3710
testcompat: merge stable into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 15:23:15 +0100] rev 3709
compat: handle different `ui.edit` signature with Mercurial 4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 16:13:42 +0100] rev 3708
wirepeer: try modern module first
This avoid some issue with remaining .pyc
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 12:07:35 +0100] rev 3707
compat: handle lack of allpredecessors for Mercurial 4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:03:05 +0100] rev 3706
branching: merge further fix into stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 11:44:05 +0100] rev 3705
wrapping: fix a silly error were we checking on module and wrapping the other
...
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 11:04:27 +0200] rev 3704
brancing: merge next release into default
We are about to release hg-evolve 8.0.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 21 Apr 2018 11:01:12 +0200] rev 3703
test-compat: open mercurial-4.5 branch
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 22 Apr 2018 11:40:17 +0200] rev 3702
evolve: point to '--abort' in error message
The way to escape and evolve run has been updated and we need to tell our user
about it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:27:13 +0200] rev 3701
compat: drop compatibility layer for pager
All versions we support now support `ui.pager`.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:25:17 +0200] rev 3700
compat: drop compatibility layer for duplicatecopies
We no longer support version before Mercurial 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:21:44 +0200] rev 3699
compat: drop compatibility layer for bookmark.applychanges
We now only support Mercurial version down to 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:15:10 +0200] rev 3698
compat: from compatibility layer for allprecursors
We only support down to 4.3 now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:12:37 +0200] rev 3697
compat: drop compatibility layer for successorssets
We support down to Mercurial 4.3 now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:08:01 +0200] rev 3696
compat: drop compatibility wrapper for "relevantmarkers"
We no longer support version without the logic we have been adding.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:51:53 +0200] rev 3695
compat: drop compat layer for cleanupnodes
We no longer support version lower than 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:07:23 +0200] rev 3694
compat: from compatibility layer for createmarkers
We support down to 4.3 now. It supports operation.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:01:49 +0200] rev 3693
compat: drop obsutile layer
Mercurial 4.2 is no longer supported.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 15:59:39 +0200] rev 3692
compat: drop vfsmod compat layer
Mercurial 4.2 is no longer supported.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:26:03 +0200] rev 3691
evolve: use in code filtered error for 4.6
Things have been upstream into core for a while, let us use them instead of the
evolve version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 15:51:44 +0200] rev 3690
documentation: refer to 4.3 in the help text
Minimal version supported is now 4.3. Drop reference to 4.2 in the help.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:14:34 +0200] rev 3689
topic: remove compatibility for older version in discovery wrapping
Support for 4.1 and 4.2 has been dropped.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:01:24 +0200] rev 3688
obscache: drop compat layer to access public changeset
We can now access precomputed sets. (compat to 4.1 and 4.2 dropped)
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:00:12 +0200] rev 3687
obscache: drop compat layer for obsmarkers reading
We cna now use a version with the argument we needs.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 13:40:57 +0200] rev 3686
template: drop compatibility layer
Support has been dropped for 4.1 and 4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 13:35:31 +0200] rev 3685
timer: drop compat layer for time
Support for 4.1 and 4.2 has been dropped.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 11:38:13 +0200] rev 3684
compat: drop support for Mercurial 4.2
Since Mercurial 4.6 is about to be released, we drop support for 4.2 too.
(code still need to be cleaned up).
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 11:39:04 +0200] rev 3683
compat: close test-compat branch for mercurial-4.2
Support for this version have just been dropped.
Martin von Zweigbergk <martinvonz@google.com> [Wed, 18 Apr 2018 22:54:11 -0700] rev 3682
evolve: add support for hg >= b4d85bc1
Mercurial commit b4d85bc1 deleted the wireproto module and its
contents are now in various other modules, so we can not even do
unchecked imports of it now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:59:12 +0200] rev 3681
discovery: handle deletion of 'wireproto' module
Mercurial commit b4d85bc122bd. deleted the wireproto module and its
contents are now in various other modules, so we can not even do
unchecked imports of it now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:55:57 +0200] rev 3680
evolve: handle wireproto module deletion for registering new commands
Module have been deleted in b4d85bc122bd. We can no longer import it blindly.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:53:59 +0200] rev 3679
minitopic: handle wireproto module change from b4d85bc122bd
This module have been scattered in other place, so we need to detect and handle
this for 4.6+
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:50:24 +0200] rev 3678
topic: handle wireproto module change from b4d85bc122bd
This module have been scattered in other place, so we need to detect and handle
this for 4.6+
Martin von Zweigbergk <martinvonz@google.com> [Wed, 18 Apr 2018 22:36:54 -0700] rev 3677
obsexchange: remove unused import of wireprotoserver
This seems to be unused since 300d7d019b9.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 18 Apr 2018 10:08:05 +0200] rev 3676
compat: rename resolvepartialhexnodeid to resolvehexnodeidprefix
The name changed in 5f8f013e7d52
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 19:42:46 +0200] rev 3675
compat: access datestr in a way compatible with verison prior to 4.6
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 19:42:26 +0200] rev 3674
compat: fallback to compatible partial lookup prior to 4.6
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 18:30:56 +0200] rev 3673
import: adapt to fd1dd79cff20
With the latest state of the code, the patch is passed to "import try one" as
parsed.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 18:10:53 +0200] rev 3672
import: grab the expected node value on the fly
We no longer parse the patch beforehand this will reduce inconsistency with
newer API.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 17:58:12 +0200] rev 3671
import: use a less direct approach to store the expected node
This will help later refactoring.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 15:45:58 +0200] rev 3670
compat: adapt `amend --patch` to the new `patch.extract` API
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 15:04:15 +0200] rev 3669
compat: deal with change in the wireproto module
Martin von Zweigbergk <martinvonz@google.com> [Mon, 16 Apr 2018 12:46:23 -0700] rev 3668
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 16 Apr 2018 20:18:10 +0200] rev 3667
topic: allow '.' in topic names
This is also commonly used.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 16 Apr 2018 10:58:06 -0700] rev 3666
relocate: look up partial nodeids in unfiltered repo
This accidentally changed to using the filtered repo in commit
0f0f3135.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 16 Apr 2018 17:11:27 +0200] rev 3665
compat: avoid using partial node ID in lookup
This is getting deprecated in 4.6.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 16 Apr 2018 00:05:54 +0200] rev 3664
test: apply output change from protocaps
CORE-TEST-OUTPUT-UPDATE: afcfdf53e4b5
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 15 Apr 2018 23:24:03 +0200] rev 3663
test: update output to match upstream
The exact wording for filtered error has been changed.
CORE-TEST-OUTPUT-UPDATE: ecd3f6909184
Martin von Zweigbergk <martinvonz@google.com> [Fri, 13 Apr 2018 09:26:28 -0700] rev 3662
evolve: don't pass stringified int to repo.__getitem__
We were doing repo['-1'], which is now deprecated. Switch to
repo['tip'], which is much clearer anyway (I initially thought this
was nullrev and sent an incorrect patch until Pierre-Yves corrected
me).
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 11 Apr 2018 07:23:34 +0200] rev 3661
patch: offer the user a chance to fix the patch if it fails to apply
The experience is still not great, but better than purely dropping the changes.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 18 Mar 2018 23:48:06 +0530] rev 3660
amend: add a new flag `--patch` to `hg amend`
This patch adds a new flag `--patch` to `hg amend` which pops up an editor with
the patch of working directory parent which you can change, and when you exit
the editor the patch with changes is applied to current working directory with
old changeset being obsoleted in favour of new one created by the applied patch.
If supplied filenames, only those filenames are present in the popped editor and
rest files stay the same way in the commit as they were.
The extension of the file which opens up in editor is '.diff', we cannot have it
as '.patch' as there will be develwarns related to that. We need to change to
patch core and undo some change to achieve this.
The implementation does not use any core API rather it has picked chunks from
API which are required. One main reason to not use core import API is that we
have to change wdir parent before using patch.patch() which I will like to avoid
to make sure we handle merge cases too. While writing this patch I have spend
lot of time try to use internal API's to work for this but none of them served
the purpose well. If I have time in future and work on similar problem again, I
am going to write better high-level API's which uses patchstore to achieve this.
A new test file test-amend-patch.t which contains a lot of testing of the
feature.
Anton Shestakov <av6@dwimlabs.net> [Thu, 12 Apr 2018 13:30:28 +0800] rev 3659
stablerangecache: include units in ui.progress() calls
Anton Shestakov <av6@dwimlabs.net> [Thu, 12 Apr 2018 13:28:30 +0800] rev 3658
stablerange: include units in ui.progress() calls
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 20:00:43 +0530] rev 3657
tests: add test demonstarting issue5833 is fixed
Previous patch which fixed issue5832 also fixed issue5833 as the root cause for
both was same. This patch adds test of issue5833 as well.
CHANEGLOG entry is also added for the fixed issues.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 20:13:27 +0530] rev 3656
utility: convert node from MultipleSuccessorsError to rev numbers (issue5832)
utility.builddependencies() deals with rev numbers but MultipleSuccessorsError
returns nodeid which breaks the function and also breaks instability resolution.
Previou patch demonstrate the breakage. This patch makes sure we convert those
nodeids to rev numbers before processing ahead.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 15:35:57 +0530] rev 3655
tests: add a test demonstarting issue5832 traceback
The traceback will be fixed in upcoming patches.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 14:56:27 +0530] rev 3654
CHANGELOG: add an entry about `hg evolve --abort`
Previous patches added a new flag `--abort` for `hg evolve` which aborts an
interrupted evolve. Currently this only works for orphan resolution cases which
is very common and most people use `evolve` for that. So let's add an entry
about that.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 17:34:51 +0530] rev 3653
evolve: restore bookmarks correctly after `hg evolve --abort`
This patch adds logic to store bookmark movements in evolvestate class and
restore bookmarks to their original place if `hg evolve --abort` is called.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 17:42:32 +0530] rev 3652
topic-ext: restrict the format of topic names
This patch restrict the format of topic names to make sure they consist only of
alphanumeric, '_' and '-' characters.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 23:42:47 +0530] rev 3651
serverminitopic: wrap context.changectx.branch instead of context.changectx
Recently some changes in core resulted in this wrapping of class leading to an
infinite recursion. Let's wrap the particular function instead of wrapping the
whole command.
This fixes test-minitopic.t which was breaking.
Boris Feld <boris.feld@octobus.net> [Fri, 06 Apr 2018 17:53:41 +0200] rev 3650
templatekw: remove obsfatedata templatekw
Individuals fields are available in core as single template functions.
Kyle Lippincott <spectral@google.com> [Thu, 29 Mar 2018 13:01:05 -0700] rev 3649
evolve: do not exit 1 when there are no troubled changesets (issue5823)
There are possibly other cases we also do not wish to exit non-zero for in this
function, but I did not analyze them closely and am just looking at resolving
issue5823.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 06 Apr 2018 17:54:58 +0200] rev 3648
changelog: add an entry about the memory fixes
Anton Shestakov <av6@dwimlabs.net> [Fri, 06 Apr 2018 14:37:22 +0800] rev 3647
safeguard: use self instead of repo in noautopublishrepo.checkpush()
Referring to repo here was somehow preventing it from being garbage-collected
(important in hgweb, where currently every request gets a new repo).
Anton Shestakov <av6@dwimlabs.net> [Fri, 06 Apr 2018 14:36:36 +0800] rev 3646
stablerangecache: use self instead of repo in stablerangerepo.stablerange()
Referring to repo here was somehow preventing it from being garbage-collected
(important in hgweb, where currently every request gets a new repo).
Anton Shestakov <av6@dwimlabs.net> [Fri, 06 Apr 2018 14:26:24 +0800] rev 3645
obscache: use self instead of repo in obscacherepo.updatecaches()
Referring to repo here was somehow preventing it from being garbage-collected
(important in hgweb, where currently every request gets a new repo).
Boris Feld <boris.feld@octobus.net> [Wed, 04 Apr 2018 16:29:48 +0200] rev 3644
templatekw: fix templatedata for 46
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 31 Mar 2018 11:53:09 +0200] rev 3643
style: fix a couple of pyflakes complains
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 16:43:28 +0530] rev 3642
evolve: add a `--abort` flag for `hg evolve` command
This patch adds a new flag `--abort` to `hg evolve` command which will abort the
interrupted evolve going on undoes the changes created by the evolve command
till now. The changes are bookmark movements, creation of evolved commits,
obsolete the old commits in favor of evolved commits.
In case when user changed things while the interrupted evolve, like did some
actions which created a new commit on top of evolved commits, or changed phase
of evolved commits to public, the evolve fails to abort as we should not strip
out the new commit formed by user neither we can strip the public changeset. The
abort fails and tell user to use `hg evolve --stop` instead.
Right now bookmark movement is broken, and will be fixed in upcoming patches.
Tests are added for the new flag.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 16:38:00 +0530] rev 3641
evolve: don't allow updating or commiting when there is interrupted evolve
We should make things simple in the starting and restrict user from doing things
which can lead to problems.
This is same as the rebase behavior.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:47:49 +0530] rev 3640
evolve: internationalize the entry of --list in hg evolve help
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:37:10 +0530] rev 3639
evolve: add evolvestate as an argument to _finalizerelocate()
This will help us to store bookmark changes to evolvestate to revert them in
case when `hg evolve --abort` is called.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:33:54 +0530] rev 3638
evolve: add evolvestate as an argument to evolvecmd.relocate()
This will help us in passing it to _finalizerelocate() and store the bookmark
changes which happend.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:13:08 +0530] rev 3637
tests: add test about handling phase-divergent merges
We don't handle phase-divergent merges and we should. Upcoming patches will add
the ability to handle them.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 14:11:13 +0530] rev 3636
evolve: show a message when evolution leads to no changes to commit
In case of orphan resolution, evolution may result in no changes to commit. This
patch adds a use message in such cases. This is same as the rebase behavior.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 13:48:34 +0530] rev 3635
evolve: pass the instability category to relocate() and _finalizerelocate()
This patch adds category argument to relocate() and _finalizerelocate()
functions to take the type of instability which we are processing so that we
perform actions accordingly.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 12:56:35 +0530] rev 3634
tests: add more tests for solving phase-divergence using `hg evolve`
This patch adds more tests for resolving phase-divergence caused due to fold or
split using `hg evolve` command. The resolution in case of split is not very
good and will be fixed in upcoming patches
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 24 Mar 2018 17:21:42 +0530] rev 3633
evolve: handle interrupted phase-divergence resolution gracefully
This patch adds logic to handle the interrupted phase-divergence resolution by
`hg evolve` command gracefully. We first complete the relocation of the
changeset and then do the divergence resolution. Previous functions moved
required code separate fucntions so that we can use them here.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 24 Mar 2018 16:41:14 +0530] rev 3632
evolve: move logic to resolve phase-divergence in a new function
This patch moves logic which does the revert and create a commit on top of
public changeset because we need to repeat that logic while handling
continuation of `hg evolve` when there are conflicts while rebasing the
phase-divergent changeset.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 24 Mar 2018 16:38:03 +0530] rev 3631
evolve: store the precursor of phase-divergent in evolvestate
This patch makes `hg evolve` store the precursor of phase-divergent changeset in
evolvestate so that we don't need to calculate that again.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 24 Mar 2018 13:17:05 +0530] rev 3630
evolve: move logic to complete interrupted relocation to new fn
This moves logic which completed the interrupted relocation to it's own separate
function as we will need that function in continuing phase-divergence and
content-divergence too.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 24 Mar 2018 12:58:12 +0530] rev 3629
evolve: move logic to complete interrupted orphan resolution to new fn
This patch moves logic which completes an interrupted orphan resolution to it's
own new function. We will defining such functions for completing
phase-divergence and content-divergence too.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 19:36:08 +0530] rev 3628
evolve: write data to evolvestate in case on conflicts in phase-divergence
This patch makes phase-divergence resolution write data to evolvestate instead
of graftstate. The `evolve --continue` handling of phase-divergence is broken
which will be done in upcoming patches.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 19:16:25 +0530] rev 3627
evolve: explicitly turn revs to list before storing into evolvestate
The cbor library which we are using cannot handle encoding and decoding Python
sets, and revs was set there. Let's convert revs explicitly to list to make sure
we don't try writing sets.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 18:58:19 +0530] rev 3626
tests: add tests of content+parent change creating phase-divergence
This patch adds tests which shows handling of phase divergence cases by `hg
evolve` command which involved content+parent change. The conflicts case is not
handled and will be fixed in upcoming patches.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 18:28:37 +0530] rev 3625
tests: show first line of commit message in test-evolve-phase-divergence.t
This patch adds 'firstline' filter to description in the log template.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 17:49:26 +0530] rev 3624
evolve: make sure bookmarks are moved after phase-divergence resolution
This patch adds logic to move bookmarks from the rebased node to the
phase-divergence resolved node.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 17:46:46 +0530] rev 3623
evolve: use the new rebased changeset to resolve phase-divergence
When there is a parent change in phase-divergence, `hg evolve` first rebases the
diveregent changeset on parent of public changeset and then continue the
resolution of phase-divergence *but* we used to continue with the old divergent
changeset rather than the new rebased one.
This patch makes sure we use the new rebased changeset to proceed with the
resolution. Tests changes shows that it fixes things which were broken earlier.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 17:21:09 +0530] rev 3622
evolvecmd: add a detailed comment and some newlines
This patch adds a detailed comment on a chunk and some newlines to make things
look better and more understandable for upcoming patches.