Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 10 Dec 2017 01:26:40 +0100] rev 3259
stablerange: introduce an intermediary abstract class for caching
The 'branchpoint' and 'mergepoint' based stablerange class will need similar
cache, we introduce an abstract class to take care of that first.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 10 Dec 2017 01:06:16 +0100] rev 3258
stablerange: introduce a basic-mergepoint method
This method use the new 'mergepoint' based stable sorting. It is expected to be
eventually better than branch point to stable range: more stable, easier to
cache, etc. Having a basic implementation will allow use to validate more
advanced implementation.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 26 Nov 2017 11:58:35 -0500] rev 3257
stablesort: add a new test to check for fully independant branches
Apparently, this was not covered.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 25 Nov 2017 17:37:37 -0500] rev 3256
stablesort: add a --limit argument
This will be useful when using stable sort within stable range.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 25 Nov 2017 15:14:50 -0500] rev 3255
stablesort: introduce a mergepoint based method focused on head
The things we needs for stable range is head centric. So we simplify the issue
by focussing on head.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 25 Nov 2017 04:09:17 -0500] rev 3254
stablesort: introduce a "mergepoint" method
The mergepoint method decide order from merge. This allow to directly reuse a
the full sort of one of the parent, and should simplify caching.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 10 Dec 2017 00:20:06 +0100] rev 3253
stablerange: fallback to a more naive approach to find subrange
As suspected, using "bheads" was bit good enough in some case and we have to
fall back to the approach used in "basic".
On the evolve repo (about 3K changeset) this approach is about 60% slower than
the previous (wrong) code.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 09 Dec 2017 22:49:07 +0100] rev 3252
stablebranch: avoid overlap between subrange
Subrange overlap make things more complicated and less efficient. We fix the
computation done in the "cached" version of the stablerange cache. This bring
things in line with the result produced by the basic version.
Since we already bumped the format version since the last release, I don't
things we need to do anything else.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 09 Dec 2017 22:37:10 +0100] rev 3251
stablerange: introduce an 'basicstablerange'
This class hold all the basic of stable range but the part specific to the
sorting.
This allow to clearly express what is expected from each method and to generate
tests output to be validated against the more complex implementation.
While writing this, we spotted a bug in the current stable range implementation.
Fix coming.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 29 Nov 2017 11:18:53 -0500] rev 3250
stablerange: extract the core API into a 'stablerangecore' class
To clarify what the code is doing without all the caching and algorithmic
improvement, we extract a core class that highlight the basic API expected from
the class.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 09 Dec 2017 22:17:00 +0100] rev 3249
stable-branch: setup tests to use a specific method by default
This will make future test simpler.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 29 Nov 2017 10:53:21 -0500] rev 3248
stablerange: rework the debug command to allow for multiple method
Similar to what we did for the other debug command related to sorting, we
prepare for the arrival of multiple method to produce the result (including
simple implementation that are easy to read but do not scale).
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 09 Dec 2017 17:34:33 +0100] rev 3247
deptcache: make sure we warm the dept cache before warming the obsdiscovery
The depthcache need to a warmed a bit more agressively
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 23 Nov 2017 16:37:24 +0100] rev 3246
stablesort: add a 'method' argument to the debugstablesort command
Let start experimenting with other way to do stable sorting.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 25 Nov 2017 02:58:47 -0500] rev 3245
stablesort: rename function to stablesort_branchpoint
We are about to test different approach to stable sorting. We clarify that the
existing method is sorting from branch points.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 09 Dec 2017 17:14:53 +0100] rev 3244
stablerange: update the filename to avoid cache confusion
The schema validation seems to not work as well as intended, we update the file
name to make sure there will be no confusion.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 23 Nov 2017 16:34:50 +0100] rev 3243
stablesort: extract in its own module
We are going to introduce variants, cache and more complex logic, we move that
in its own repository beforehand.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 29 Nov 2017 12:48:45 -0500] rev 3242
compat: in depth cache, only use cachevfs when available
We support older version without the new vfs.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 23 Nov 2017 16:53:29 +0100] rev 3241
depthcache: issue a progress bar when loading the depth cache
The operation can be in the minute order of magnitude of some larger repository.
We better keep the user entertain when he wait.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 22 Nov 2017 15:05:15 +0100] rev 3240
depthcache: move to a dedicated object and storage
The SQL cache was overkill and fragile. We move to a dedicated storage using the
new generic class.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 22 Nov 2017 13:44:44 +0100] rev 3239
cache: adds debug details about what the content of the update
Having more data in debug is good, we add a small method to help providing them.
This code was headed for core during the 4.3 cycle but never made it there. So
we starts with a copy in the evolve repository.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 22 Nov 2017 13:40:47 +0100] rev 3238
cache: introduce a changelogsourcebase class
This abstract class will help code that need a cache tracking the changelog
content (eg: the branchmap cache). The cache key used is the same as what the
branchmap uses.
This code was headed for core during the 4.3 cycle but never made it there. So
we starts with a copy in the evolve repository.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 22 Nov 2017 13:40:05 +0100] rev 3237
cache: introduce an abstract class for cache we can upgrade incrementally
Right now each class implements their own mechanism for validation, and
update. We start introducing abstract class to ultimately allow more
unification of the cache code.
The end goal of this series is to introduce a cache for some obsolescence
property, not to actually implement the cache. However, taking advantage of
adding a new cache to introduce the abstract class seems like a win.
This code was headed for core during the 4.3 cycle but never made it there. So
we starts with a copy in the evolve repository.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 22 Nov 2017 16:57:07 +0100] rev 3236
depth: basic debugdepth implementation and test
This will come very handy to validate more advanced implementation later.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 09 Dec 2017 06:13:28 +0100] rev 3235
topics: add a config to reject draft changeset without topic on a server
This patch adds a new config option experimental.topic-mode.server which if
sets to True, the server won't accept any draft changeset without topic on it.
In case both `experimental.topic-mode.server` and
`experimental.topic.publish-bare-branch` are set to True, the enforce-topic one
is respected.
Tests are added for it. The CHANGELOG file is also updated mentioning about the
config option.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 09 Dec 2017 05:05:39 +0100] rev 3234
test: update output to ad5f2b923b0d
A new bundle2 capabilities have been added (related to bookmark). So we have to
update the test output.
CORE-TEST-OUTPUT-UPDATE: ad5f2b923b0d
Denis Laxalde <denis@laxalde.org> [Thu, 07 Dec 2017 20:34:18 +0100] rev 3233
touch: shorten touch's docstring to make it fit into a one line
This make it show completely (untruncated) in `hg help -e evolve`.
This follows up on fed946edc293 where the docstring got unwrap for that
purpose and thus made the line length exceed 80 columns.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 05 Dec 2017 18:31:08 +0100] rev 3232
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 06 Dec 2017 02:08:37 +0100] rev 3231
help: promote "amend" to important command
Recent change to what command we advertise as "basic". It turn out "amend" was
not part of one of them. Since "amend" is one of the core command of a rewriting
workflow, we promote it to "basic command".
Kyle Lippincott <spectral@google.com> [Tue, 05 Dec 2017 16:11:08 -0800] rev 3230
help: fix output for `hg help -e evolve` wrt 'touch' command
Currently, when running `hg help -e evolve`, the output looks like this on my
screen:
touch create successors that are identical to their predecessors
except
With this change, it looks like this:
touch create successors that are identical to their predecessors
except for the changeset ID
Kyle Lippincott <spectral@google.com> [Tue, 05 Dec 2017 16:08:50 -0800] rev 3229
help: remove a few commands from `hg` (no args) command list
According to `hg help -e evolve`, the following commands come from the evolve
extension:
amend
evolve
fold
metaedit
next
obslog
pdiff
previous
prune
pstatus
split
touch
uncommit
If one runs `hg` without arguments, commands that are prefixed with a ^
character are shown. From the previous list, this includes:
evolve
fold
metaedit
next
previous
prune
split
touch
uncommit
It feels several of these commands are not "basic commands" that someone who
has never used hg before might care about. They probably also do not come
close to passing the "toothbrush test": things that users are likely to use
every day. This commit removes these items from the list: metaedit, touch,
uncommit
This means the following are kept:
evolve
fold
next
previous
prune
split
Kyle Lippincott <spectral@google.com> [Mon, 04 Dec 2017 14:27:27 -0800] rev 3228
typos: fix typos in several locations
A user at Google attempted to fix our local copy because they had noticed a
typo (accross instead of across), but this will just get overwritten on our
next import. This commit fixes that case and a few others that my editor found.
Most of the typos were in comments, but user-visible output is changed in a few
cases:
- accross -> across
- splitted -> split
- ambigious -> ambiguous
- evolvestte -> evolvestate (this is in a ui.debug, so not often seen)
There is another typo that I wanted to fix, but didn't: 'supercede' is spelled
'superseed' in a few locations. I believe this is only internal to the
extension, instead of being user-visible, so while it could probably be fixed
easily, I wasn't 100% sure it didn't end up in a file on disk or something and
might cause problems, so I left it alone.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 05 Dec 2017 13:53:04 +0100] rev 3227
topic: use more protective code to access current topic
There are some code path where the operation is not properly initialized and
lack the new attributes. While the lack of initialization, is suspicious and
I've not be able to pin point case where this happens.
Currently the code crash when it encounter this situation. So we make the code
more resistant to this case to prevent bad user experience.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 05 Dec 2017 13:21:57 +0100] rev 3226
topic: use more protective code to access publishing code
There are some code path where the operation is not properly initialized and
lack the new attributes. While the lack of initialization, is suspicious and
I've not be able to pin point case where this happens.
Currently the code crash when it encounter this situation. So we make the code
more resistant to this case to prevent bad user experience.
Kyle Lippincott <spectral@google.com> [Mon, 04 Dec 2017 14:27:27 -0800] rev 3225
typos: fix typos in several locations
A user at Google attempted to fix our local copy because they had noticed a
typo (accross instead of across), but this will just get overwritten on our
next import. This commit fixes that case and a few others that my editor found.
Most of the typos were in comments, but user-visible output is changed in a few
cases:
- accross -> across
- splitted -> split
- ambigious -> ambiguous
- evolvestte -> evolvestate (this is in a ui.debug, so not often seen)
There is another typo that I wanted to fix, but didn't: 'supercede' is spelled
'superseed' in a few locations. I believe this is only internal to the
extension, instead of being user-visible, so while it could probably be fixed
easily, I wasn't 100% sure it didn't end up in a file on disk or something and
might cause problems, so I left it alone.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 04 Dec 2017 17:16:01 +0530] rev 3224
tests: add a test for newline in obsnote
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 04 Dec 2017 15:50:32 +0530] rev 3223
obsnote: don't add '' to note while showing it in obslog
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Dec 2017 23:40:08 +0530] rev 3222
obsnote: add an entry in CHANGELOG about it
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 17 Nov 2017 03:14:47 +0530] rev 3221
amend: add support for storing a note in obsmarker
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 17 Nov 2017 03:14:31 +0530] rev 3220
uncommit: add support for storing a note in obsmarker
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 17 Nov 2017 03:14:20 +0530] rev 3219
fold: add support for storing a note in obsmarker
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 17 Nov 2017 03:14:08 +0530] rev 3218
metaedit: add support for storing a note in obsmarker
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 17 Nov 2017 03:13:52 +0530] rev 3217
prune: add support for storing a note in obsmarker
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 17 Nov 2017 03:06:06 +0530] rev 3216
split: add support for storing a note in obsmarker
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 12 Nov 2017 01:54:13 +0530] rev 3215
touch: add support for storing a note in obsmarker
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 12 Nov 2017 01:35:51 +0530] rev 3214
obslog: add initial support for showing note in obslog
This add a very basic and initial support for showing the note stored in the
obsmarker in obslog to test the upcoming changes which adds support. The UI is
not finalised and will be improved in the patches after support is added and we
have tests with the current output.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 12 Nov 2017 01:26:30 +0530] rev 3213
cmdrewrite: add a utility function to make sure note is of valid format
Upcoming patches will add support to store a note on various evolution related
commands by storing that in obsmarker. Since the obsmarker metadata field can't
store things above 255 bytes, this patch introduces a function which will be
used to make sure note is under 255 bytes and does not contain newlines. We
don't want notes to be multilines.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 30 Nov 2017 12:14:36 -0500] rev 3212
branching: merge with stable
Boris Feld <boris.feld@octobus.net> [Wed, 29 Nov 2017 20:50:37 -0500] rev 3211
test: remove dangling --config in test-metaedit.t
Martin von Zweigbergk <martinvonz@google.com> [Thu, 30 Nov 2017 21:31:14 -0800] rev 3210
tests: fix previously accidentally matching regexes in test-touch.t
Before Mercurial commit 6d5718e39657 (run-tests: make "| foo (re)" not
match everything, 2017-11-29), regexes like "| foo", which are common
in graphlog output, would incorrectly match anything. After that
commit, they match as they should, meaning that either "" or " foo"
would match, but not a "| foo". This commit fixes the test by
replacing the "|" by "." rather than escaping with "\|" since that
would make the graph harder to read.
Boris Feld <boris.feld@octobus.net> [Thu, 30 Nov 2017 12:09:21 -0500] rev 3209
test: update test-discovery-obshashrange.t
Boris Feld <boris.feld@octobus.net> [Wed, 29 Nov 2017 20:50:37 -0500] rev 3208
test: remove dangling --config in test-metaedit.t
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 24 Nov 2017 23:46:56 -0500] rev 3207
serverminitopic: also avoid reading
Avoiding to write cache for filter where topic applies is a good step, but we
need to also avoid reading it. Existing branchmap cache might exists before the
turned the feature on.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 15 Nov 2017 08:00:17 +0100] rev 3206
topic: introduce a minimal extensions to enable topic on the server
This small extensions simply expose topic in the branch. This should help
getting minimal support for topic from various hosting solution (eg: bitbucket
maybe ?) See extensions help for details.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 25 Nov 2017 17:47:02 -0500] rev 3205
branching: merge stable into default
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 24 Nov 2017 22:36:57 +0100] rev 3204
pusoperation: wrap pushoperation __init__ directly
This is how remote names does it. Using the same method should helps with
compatibility when mixing the two extensions.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 23 Nov 2017 00:29:52 +0100] rev 3203
hgignore: fix .err matching patterns
We don't want to ignore .err file outside of the 'tests/' directory.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 19 Nov 2017 04:47:10 +0100] rev 3202
changelog: fix 7.0.0 release date
We date was the same as 6.8.0 for some unkown reason. We now use the date of the
tag.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 17 Nov 2017 00:51:31 +0100] rev 3201
changelog: mention the improved verbosity handling
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 17 Nov 2017 00:49:09 +0100] rev 3200
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 17 Nov 2017 00:48:08 +0100] rev 3199
changelog: update missing release date
Martin von Zweigbergk <martinvonz@google.com> [Thu, 16 Nov 2017 11:38:33 -0800] rev 3198
summaryhook: respect -q flag
There's no test coverage, but it seems pretty obvious and I don't care
enough to write a test.
Martin von Zweigbergk <martinvonz@google.com> [Thu, 16 Nov 2017 11:32:24 -0800] rev 3197
summaryhook: remove unused function
Martin von Zweigbergk <martinvonz@google.com> [Thu, 16 Nov 2017 11:22:38 -0800] rev 3196
evolve: make prev/next respect --quiet flag (issue5742)
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 15 Nov 2017 00:30:15 +0100] rev 3195
packaging: merge 7.0.1 into default
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 15 Nov 2017 00:16:37 +0100] rev 3194
packaging: mark version as development version.
This helps reduce confusion when installing non tagged version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 15 Nov 2017 00:15:29 +0100] rev 3193
Added tag 7.0.1 for changeset e7a2a6158077
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 15 Nov 2017 00:14:01 +0100] rev 3192
packaging: prepare version 7.0.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 15 Nov 2017 00:13:10 +0100] rev 3191
packaging: update tested-with version
Mercurial 4.4.1 is out.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 15 Nov 2017 00:12:38 +0100] rev 3190
changelog: mention the --publish bugfix
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 14 Nov 2017 23:15:20 +0100] rev 3189
test-compat: merge mercurial-4.2 into mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 14 Nov 2017 23:15:19 +0100] rev 3188
test-compat: merge mercurial-4.3 into mercurial-4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 14 Nov 2017 23:15:18 +0100] rev 3187
test-compat: merge stable into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 14 Nov 2017 23:11:00 +0100] rev 3186
compat: fix comp ability of the new phase logic for Mercurial < 4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 02 Nov 2017 19:08:36 +0100] rev 3185
config: clarify that config is only enabled on the repository is it setup for
This changeset change nothing but clarify a few thing. The ui passed to
'reposetup' is the same as 'repo.ui'. However we would like to clarify things a
bit.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 14 Nov 2017 23:04:04 +0100] rev 3184
branching: merge with an old and strange head
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 25 Jul 2017 02:29:28 +0200] rev 3183
branching: default into stable
It is time for a new release
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 14 Nov 2017 21:05:59 +0100] rev 3182
topic: fix new head detection when using --publish on a topic
I suspected a bug lurking around there and I found one.
Boris Feld <boris.feld@octobus.net> [Tue, 14 Nov 2017 18:35:25 +0100] rev 3181
effect-flag: fix obsfate verb hooking
Mercurial core commit b81ad5b78a81 renamed a the function we hooked on and
update its signature. Update the code to detect that, which fixes tests
errors.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 07 Nov 2017 14:07:19 +0100] rev 3180
test: update test output for effect flag by default
Now that effect flag is in core and turned on by default, this affect topic test
that did not had the evolve extension turned on all the time.
CORE-TEST-OUTPUT-UPDATE: a7e49a5b3e6f
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 07 Nov 2017 14:21:19 +0100] rev 3179
tests: add more testing of pulling with various setting
We checks for client/server with various combination:
* extensions enabled,
* extensions enabled but exchange disabled,
* extensions disabled,
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 07 Nov 2017 13:05:39 +0100] rev 3178
test-compat: merge mercurial-4.2 into mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 07 Nov 2017 13:05:38 +0100] rev 3177
test-compat: merge mercurial-4.3 into mercurial-4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 07 Nov 2017 13:05:37 +0100] rev 3176
test-compat: merge stable into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 07 Nov 2017 13:04:58 +0100] rev 3175
branching: merge stable into default
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 07 Nov 2017 12:57:43 +0100] rev 3174
changelog: add details about the pushkey related fix
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 07 Nov 2017 12:36:27 +0100] rev 3173
wireproto: gracefully fail on http when trying to use older pushkey method
Previously the HTTP server would return a 500. It now returns a 410.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 07 Nov 2017 12:10:22 +0100] rev 3172
wireproto: avoid exposing pushkey abort for server without evolution
Client with evolution enabled will query the 'obsolete' pushley namespace if no
other way to request obsmarkers have been found. They will do this
unconditionally as long as no other obsolescence related capabilities have been
advertised by the server.
The call is "harmless" since the namespace will be empty if obsmarkers exchange
is disabled. However, since we forbid the use of pushkey for obsmarkers this
lead to unexpected crash report for up to date client talking to a server with
the evolve extensions but exchange disabled.
We fix the issue by serving the expected empty namespace in this case. We keep
forbidding the query if obsmarker exchange is enabled since new client should
have picked another more effective was to fetch the data first.
We also add some tests for this logic.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 02 Nov 2017 19:22:32 +0100] rev 3171
obsdiscovery: enforce the config on the server too
Right now, setting 'experimental.evolution.obsdiscovery=no' disable obsolescence
markers discovery on client only. The server still advertise discovery related
capabilities.
We now also honor the config on the server side.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 02 Nov 2017 00:48:25 +0100] rev 3170
packaging: mark default branch as development version
This help avoid confusion when installing version from the repository.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 02 Nov 2017 00:47:11 +0100] rev 3169
branching: merge back stable back into default
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 01 Nov 2017 23:58:27 +0100] rev 3168
test-compat: merge mercurial-4.2 into mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 01 Nov 2017 23:58:27 +0100] rev 3167
test-compat: merge mercurial-4.3 into mercurial-4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 01 Nov 2017 23:57:56 +0100] rev 3166
test-compat: merge stable into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 02 Nov 2017 00:45:28 +0100] rev 3165
packaging: mark as development version
This help avoid confusion when installing non tagged version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 02 Nov 2017 00:43:57 +0100] rev 3164
Added tag 7.0.0 for changeset c56c028f3802
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 02 Nov 2017 00:33:14 +0100] rev 3163
packaging: prepare version 7.0.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 02 Nov 2017 00:32:47 +0100] rev 3162
debian: drop outdate part of the description
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 02 Nov 2017 00:32:24 +0100] rev 3161
debian: update Mercurial version dependencies
The debian package now reflect the actual requirement of the extension in its
current version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 01 Nov 2017 23:51:55 +0100] rev 3160
branching: merge with stable to prepare version 7.0.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 01 Nov 2017 16:23:13 +0100] rev 3159
push: add a --publish flag
The new flag turns all element in the push to public changeset. This will help
experiment with diverse publishing workflow.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 01 Nov 2017 16:26:33 +0100] rev 3158
topic: add an option to automatically publish topic-less changeset
This new option will help playing with merge based workflow.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 30 Oct 2017 19:24:14 +0100] rev 3157
topic: add an option to enforce a single head per name in a repository
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 15 Oct 2017 00:07:21 +0530] rev 3156
revset: clean up some messy logic
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 26 Oct 2017 09:03:48 +0200] rev 3155
evolve: rename --phasedivergent flag to --phase-divergent
This makes the whole things easier to read.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 26 Oct 2017 09:02:25 +0200] rev 3154
evolve: rename --contentdivergent flag to --content-divergent
This makes the whole things easier to read.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 26 Oct 2017 08:44:50 +0200] rev 3153
pushkey: forbid usage of pushley to exchange markers
The pushkey based protocol lacks many important feature and is very slow. We
disable it to prevent any usage by mistake.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 26 Oct 2017 08:29:36 +0200] rev 3152
changelog: add an entry for 7.0.0 with recent change
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Oct 2017 04:41:17 +0200] rev 3151
compat: drop compat code for smartrevs.first
The 'first' method have been around for years.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Oct 2017 07:32:06 +0200] rev 3150
compat: drop compatibility dance around configoverride
This was introduced in hg-4.1 and we do no longer support lower versions.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Oct 2017 04:45:31 +0200] rev 3149
compat: drop support for older exchange protocol
Their have been better alternative for years. In addition they have been
officially deprecated for quite some time. So we official stop support them to
ease the maintainance.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Oct 2017 14:30:48 +0200] rev 3148
compat: drop compatibility for 'streamres' prior to 4.1
We no longer support these version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Oct 2017 14:24:29 +0200] rev 3147
compat: drop the directaccess hacky extension
The user of this extension has forked their own version. We lighten our
maintenance burden and drop it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Oct 2017 14:23:31 +0200] rev 3146
compat: drop the inhibit hacky extension
The user of this extension has forked their own version. We lighten our
maintenance burden and drop it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Oct 2017 14:17:14 +0200] rev 3145
compat: drop 'lru.get' work-around for 3.9
We no longer support this version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Oct 2017 14:13:57 +0200] rev 3144
compat: stop working around 3.8 file cache limitation
We no longer support this version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Oct 2017 14:13:23 +0200] rev 3143
compat: simply the wrapping of '_destmergebranch'
All the version we support now use the same interface.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Oct 2017 14:12:37 +0200] rev 3142
compat: drop support for 3.8's '_destrebase' function
We no longer support this version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Oct 2017 14:11:28 +0200] rev 3141
compat: mark version 4.1 as the minimum version required
We dropped compatibility for version 3.8, 3.9 and 4.0.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Oct 2017 16:08:29 +0200] rev 3140
compat: drop compatibility for Mercurial <= 4.0
We are dropping compatibility with older mercurial version. This will help us
to clean up the code base.