tests: add test showing `evolve --continue` after `next --evolve` is broken Recent series fixing `hg evolve --continue` break the continue functionality after a conflicting `hg next --evolve`. This patch adds a test to demonstrate that. It will be fixed in the upcoming patch.

color: add some colors to evolve command itself

wireproto: fix *_capabilities for change of API types Mercurial commit 2f7290555c96 introduced new types for *_capabilities, update the code to use them.

obsfate: fix changeset description diff computing Mercurial core 8b6dd3922f70 changed the mdiff.unidiff API. Add a new compat method for all supported Mercurial versions.

evolve: add comptability to read old evolvestate files When a user runs `hg evolve` with old evolve where we used to write evolvestate the old ways i.e. without using cbor, and faces conflicts, the evolve is interrupted. If the user updates evolve before completing the evolve, that can result in traceback as the new evolve cannot read the old evolvestate file. The previous patch added function to read old evolvestate file and this patch uses that when we encounter the above mentioned case.

state: bring back the function to read old evolvestate files Before introduction of this nice cmdstate file wrapper, we had individual methods to write data to evolvestate file. Let's bring back the function which used to read data from the old evolvestae file so that we can use it in next patch for BC purposes.

evolve: add entry in CHANGELOG about fixed behavior of `hg evolve --continue`

evolve: store the skippedrevs in evolvestate While doing `hg evolve`, there are some revs which are skipped as they can't be evolved. Before this patch, we did not store this information in evolvestate and neither they were evolved, so `hg evolve --continue` will again try to stabilize those revisions. As much time as we run `hg evolve --continue`, this will happen which is not a good behavior. This patch adds a skippedrevs list to evolvestate where we store such revisions so that we don't try to stabilize them again.

evolve: show the updated working directory after `hg evolve --continue` `hg evolve` shows a nice message about the new working directory when the evolve ends but if the evolve is interrupted by conflicts and you continue the evolve resolving the conflicts, that nice message is lost. Let's have that in case of `--continue` too.

evolve: make `hg evolve --continue` respect `--confirm` Previous patch added capability to `hg evolve --continue` to continue the rest of the stack, not just the current revision but that was missing respecting the `--confirm` flag which user passed earlier. This patch makes sure we respect the `--confirm` flag.

evolve: make `--continue` continue evolving all remaining revisions This patch makes `hg evolve --continue` to continue all remaining revisions instead of just the current conflicted one. There are some still improvements required to this behavior after which the CHANGELOG entry will be added.

tests: add more tests to test-evolve-continue.t This patch adds more tests for `hg evolve --continue`. The tests demonstrates how the continuation handling of hg evolve is broken and the later patches fixes that handling.

evolve: handle case when newnode can be None while continuing evolve There can be case when `hg evolve --continue` is run, when working directory is clean and there is nothing to be included in the new commit. Let's make sure we handle such cases correctly and obsolete the node which is evolved with parent of wdir as successor. This is same as what rebase does.

tests: add tests for `hg evolve --continue` This patch adds a new test file containing tests for `hg evolve --continue`. The test file still does not contains all the tests related to `hg evolve --continue` as one of the case is broken which needs to be fixed first. The case is when resolving a conflicting evolve results in empty wdir. Next patch will fix the traceback and then a later patch will add more tests.

merge with stable

CHANGELOG: add an entry about resolve showing how to continue evolve

test: explicitly run HGEDITOR shell command with `sh` Otherwise Windows pops up the "What program do you want to use to open this?" dialog.

test: conditionalize blackbox output for Windows

branching: merge with stable

compat: add wrapper for logcmdutil functions These classes and functions were bulk-renamed at hg c8e2d6ed1f9e.

evolve: store the revs to be processed in the evolvestate This will help us in getting a full functional `hg evolve` where `hg evolve --continue` does not only continue one changeset.

evolve: store the replacements in the evolvestate This will greatly help when we will be implementing `hg evolve --abort`.

evolve: store the target category in evolvestate

evolvecmd: use the evolvestate object passed as argument in _solveunstable Earlier if get a merge conflict, we used to initialize a new evolvestate object and used to save it. Let's start using the state object which we get in as argument as that will contain more data about the state.

evolvecmd: pass evolvestate object to _solve* functions This patchs adds an argument evolvestate to _solve* functions. This will help us in having one evolvestate object which we can pass around various functions and keep storing what's going on.

evolve: create a state object in all case Let's create a state object even when we are not in the continue mode. This will help us passing the state object to rest of the functions.

branching: merge with stable

grab: preserve phase of the grabbed changeset This patch fixes the wrong behavior of loosing secret phase of the grabbed changeset.

tests: add a test showing grabbing of secret changeset turn it into draft This patch adds a test showing wrong behavior of `hg grab` command which looses the secret phase while grabbing a secret changeset.

grab: add grab info to cmdutil.afterresolvedstates This will help us in showing how to continue the grab when user resolves all the conflicts.

evolve: add evolve info to cmdutil.afterresolvedstates Adding evolve info to cmdutil.afterresolvedstate will improve the ui when we run into merge conflicts while evolving. Once we resolve all the conflicts using `hg resolve`, this will show a message saying "continue: hg evolve --continue". Other extensions like rebase and shelve also use it and it's very helpful.

doc: add link to roadmap Add a link to the Evolution roadmap in the main page of the documentation.

evolve: move the evolve command to evolvecmd.py This patch moves finishes the code movement by moving the evolve command to evolvecmd.py.

evolve: move _orderrevs() function evolvecmd.py _orderrevs() is a function which is used to order the revs in which the instability needs to be solved if we have multiple revisions to resolve.

evolve: move builddependencies() and _singlesuccessor() to utility module The builddependencies() and _singlesuccessor() function are very useful functions and can be used at a lot of places. They are also used in topic extension also, so let's move them to utility. However moving them to utility won't help anything in the topic extension.

utility: move MultipleSuccessorsError from __init__.py The MultipleSuccessorsError is required in multiple modules in upcoming patches, so let's move it to utility first.

evolvecmd: move more core from __init__.py to evolvecmd.py We are done with moving helper code, we will now be moving the evolve command in the new module.

evolvecmd: move code from __init__.py to evolvecmd.py

evolvecmd: move more code from __init__.py to evolvecmd.py We are now very close to have most of the evolve related code in evolvecmd.py.

evolvecmd: move more chunks of code from __init__.py to evolvecmd.py

evolvecmd: move more functions from __init__.py to evolvecmd.py If things are looking ugly, hold on.

evolvecmd: introduce a new module to handle `hg evolve` related code __init__.py is to cluttered with wrapping and all, it's better to move code related to evolve command to new a module which will help us in great refactoring and introducing nice and better flow of data through functions. There is a temporary import cycle is introduced which will be fixed in the series.

evolve: remove not required calls to phases.retractboundary() To make sure phases are preserved during evolve, we started using the phases.new-commit config option. Now we don't need to call phases.retractboundary(). Let's remove the redundant code.

evolve: store the replacements occurred during `hg evolve` at top level This patch starts storing the replacements made during the `hg evolve` command. The current dictionary is not used anywhere but will be used in future as we want to introduce abort functionality, so we want to delay writing of obsmarkers, storing these exchanges in statefile etc.

evolve: make the _solve* functions return a tuple This patch makes _solve* functions return a tuple which will contain information about whether we were able to solve the instability and if yes, then what was the newnode. For more details about tuple, look the fn docs added. There was some refactoring required in next command because of change in return values. This also leds to omitting the wdir update message in case of dry-run which is good.

evolvestate: rename the file to state.py and class name to cmdstate The evolvestate.py and the evolvestate class in it were introduced to help `hg evolve` grow continue and abort options. But the class and it's API can be easily used to store state information for other state files like we stored the information for grab state in the previous commit. Let's rename the the file and class.

branching: merge with stable

update: show "use 'hg evolve' to..." hint iff evolve command enabled Before this patch, one had to enable *all* commands (by including "allnewcommands" in the experimental.evolution config) for the hint to be shown.

obslog: drop period from summary line in accordance with convention

grab: add a command to grab a commit and update to it This patch adds anew command `hg grab` which will pick a commit and put it on the top of the working directory parent and updates to it. Earlier grab was an alias for `hg rebase -r <rev> -d .` which is now deleted to make sure `hg grab` resolves to the grab command and that alias. Continuing interrupted grab functionality is also there using the evolvestate class. Tests are also added for the new introduced command.

amend: query the wdir parent after taking lock (issue5266) If we query wdir parent without taking a lock, that can lead to bugs because the wdir parent can change is another process has changed the wdir parent. One such example of this was issue 5266. When a user is running amend and that amend is waiting for commit message, the user runs another amend which waits for lock. The second amend is waiting for lock, but has already read the description from the parent of working directory to use. Once the first amend completes the wdir parent changes but we still have the description from an old wdir parent. This patch fixes the bug by querying the description after taking lock. Attempts were made to add test for this but the results were unstable because they depend on time in which lock is released.

fold: make sure we move bookmarks after folding (issue5772) The rewriteutil.rewrite() API currently only handles moving bookmark from a old node to new node. In case on fold, we have multiple old nodes, from where a bookmark move is possible. The rewriteutil.rewrite() API is used by another commands also and it's not good to plug in some logic there. This patch handles bookmark movement from all the old nodes to the new node.

tests: add a test showing bookmark not moving in-case of `hg fold` This patch adds a test showing that bookmark is not moved when doing `hg fold`. This test represents issue 5772.

branching: merge stable back into default

test: update test output ot reply caps size change CORE-TEST-OUTPUT-UPDATE: 2e703ed1c713

branching: merge default test output into stable Mercurial 4.5 has been merged, we update the expected test output.

branching: open Mercurial 4.4 compatibility branch

branching: merge release 7.2.1 into default

packaging: mark source as development version This help avoiding consusion

Added tag 7.2.1 for changeset 6c772398eb4e

test-compat: merge mercurial-4.2 into mercurial-4.1

test-compat: merge mercurial-4.3 into mercurial-4.2

test-compat: merge stable into mercurial-4.3

packaging: prepare version 7.2.1

branching: merge with tutorial output update

test-compat: merge mercurial-4.2 into mercurial-4.1

test-compat: merge mercurial-4.3 into mercurial-4.2

test-compat: merge stable into mercurial-4.3

tutorial: docgraph output seems to have been dedented Update the outputs following latest version of docgrpah and its dependencies.

test: update output for more verbose blackbox CORE-TEST-OUTPUT-UPDATE: 853bf7d90804

test: update with new 'update' hint about obsfate CORE-TEST-OUTPUT-UPDATE: 35a0f6f31eef

evolve: update output for wider reporting of troubled changesets CORE-TEST-OUTPUT-UPDATE: 1a09dad8b85a

test: update output for new `merge --abort` message Core have updated its command to cancel a failed merge, update the test output to match it. CORE-TEST-OUTPUT-UPDATE: 41ef02ba329b

branching: merge with stable

changelog: mention 4.5 compatibility

trouble-reports: yield to in code reporting of new troubles Mercurial 4.5 has the feature in core, let core do the reporting in this case.

caches: fix automatic warming trigger The caches were supposed to get warmed when we receive a push. However the transaction created when we -issue- a push use a similar name and was confusing the detection. We now properly detect the case.

changelog: mention the packaging bugfix

packaging: properly install the evolve.thirdparty module It is properly added to the Manifest.in but that is not enough. We need to find another tool capable of catching things.

branching: merge release tags into default

packaging: mark source as development version This help avoiding consusion

Added tag 7.2.0 for changeset bf6b859807ba

test-compat: merge mercurial-4.2 into mercurial-4.1

test-compat: merge mercurial-4.3 into mercurial-4.2

test-compat: merge stable into mercurial-4.3

branching: merge stable back into default The test change has to be reverted.

branching: merge further compat change into stable

branching: merge further compat change into stable

branching: merge more compatibility fix into stable

packaging: merge 7.2.0 into stable

tests: update test output to match 4.4 The stable branch is sitll 4.4.

branching: backed out test output changes from core-1905aac253f0 This backs out evolve-ae6fddf39933

branching: backed out test output changes from core-02fdb8c018aa This backs out evolve-1905aac253f0.

compat: fix argument check for marker reading The previous check was broken for 4.2

cachevfs: use a compatibility later for all access

diff: drop default argument value This argument use the default value for an argument not available in earlier version. So we just stop passing the argument.

test: use hash in test-evolve-topic.t This helps testing compat with older version.

packaging: prepare version 7.2.0

changelog: prepare for coming release

stablerange: add missing licence and copyright header

obshistory: pass the csets description in getmarkerdescriptionpatch Previous patches removed any use of ctx in the function and we now just need the cset description in the function. Let's pass that only. This will save couple of calls of repo[node].

obshistory: remove the unused function The function is not used anymore.

obslog: add header to the changeset description diff This patch adds `diff -r <hash> -r <hash> <filename>` header to the output of the changeset description diff which is shown using the --patch flag of obslog command. This fixes the label/color issue for description diff also.

obslog: colorize the description diff shown in obslog -p This patch colorizes the description diff shown in `hg obslog -p`. The labels for the header are different from that of the patch as the main header which says `diff -r <somehash> -r <somehash> <filename>`. Next patch will hack to add that.

obslog: colorize the patch shown using `hg obslog -p` This patch adds color support to the patch shown in obslog command.

topic: suggest using topic when user creates a new head on branch This patch adds a message to use topics when user creates a new head on a branch.

changelog: update changelog with some of the benefit from the new format

evolve: use better words in conflict markers of `hg evolve` Though we call merge.graft internally, we still have the functionality to pass the words we want to show up in conflict markers. So let's use better words here.

tests: add a test demonstrating we still use graft in conflict markers This patch adds a test which shows that we still use the word graft in the conflict markers. Next patch will start using evolve instead of graft.

evolve: remove the old functions for writing evolvestate Previous patch made all the users of these functions to use the evolvestate class and now they are not required. Let's remove them.

evolve: use the new evolvestate class in place of old methods Earlier we had three methods, which used to handle all the storage around the evolvestate but in previous patch we have introduced an evolvestate class wrapper which can serve for all our needs. This patch replaces the existing usage of the evolvestate with the new class introduced. Upcoming patches will start using the class at more places.

evolvestate: add a class to wrap the state of `hg evolve` command This patch adds a new file which contains a class which will act as a wrapper for the data to be stored or used during the `hg evolve` command. This patch just introduces the file and does not use it at the moment. The upcoming patches will start using it.

evolve: start vendoring third party package cbor This patch adds a third party package named cbor. cbor is a data serialization format and this library provides API to convert Python Objects into cbor formatted data. To know more about cbor, hop onto cbor.io The files are copied from it's official bitbucket repository which is at https://bitbucket.org/bodhisnarkva/cbor/src/113f42203c941470c98f7174065ba9b384cff727/ cbor.py can be found at https://bitbucket.org/bodhisnarkva/cbor/src/113f42203c941470c98f7174065ba9b384cff727/py/cbor/cbor.py # no-check-commit as we are importing a third party package Modified test-check-flake8.t to not lint on thirdparty packages.

uncommit: add a new flag `--revert` to discard wdir changes after uncommit This patch adds a new flag to `hg uncommit` using which one can discard the wdir changes which are left after the operation. Both the changes, the ones which were before the uncommit and the ones which were added to wdir as a result of uncommit as cleared out.

evolve: use phases.new-commit config to retain phase information (issue5720) Since the previous patches replaced the use of graftstate with evolvestate and we don't graft anymore on evolve --continue, we have now the capability to fix underlying bugs. This patch makes sure we use the phases.new-commit config to make a new commit of the same phase as that of the predecessor. Tests added in the previous patch shows the bug being fixed.

tests: add a test demonstarting lose of phase in `hg evolve` This patch adds a new test file which demonstrates the lose of phase information when hg evolve command runs into conflict. This is algo bug5720. The upcoming patch will fix it. A new test file is added as existing test files serve their own purpose and are already cluttered.

evolve: add a utility fn to check validity of opts passed to `hg evolve`

evolve: don't use graftstate for continuing `hg evolve` Before this patch, if user runs `hg evolve`, we read the evolve state, write a graftstate from that information and run graft command. This patch replaces that logic with new logic which does not depends on the graft state. The new logic is very filtered part of logic from graft command. We did not require a lot of opts checking and filtering revs logic from the graft command as our use case is fixed. This is the start of series/work which will make `hg evolve` better and have a good statefile for itself.

topics: add a new templatekeyword `topic` This patch adds a new templatekeyword topic which can be used to list the topic of the changeset when using commands which supports templating.

packaging: update MANIFEST.in to include new tutorial files I forget to update the MANIFEST.in file when important the new tutorial files. This commit fix that.

test-compat: merge mercurial-4.2 into mercurial-4.1

test-compat: merge mercurial-4.3 into mercurial-4.2

test-compat: merge stable into mercurial-4.3

test: add a test to reproduce issue 5720

test: add missing cycle test Also fix precursors to break on obs markers cycles.

Small typos fixing in the topic tutorial

doc: import the training support Import the training support which was stored in a private-repository before.

branching: merge with stable

evolve: use new trouble names in commit messages There is case when we add trouble to the commit message while using `hg evolve`. This match makes sure, we use the new trouble names. The hash changed because it depends on commit messages.

evolve: use compat.TROUBLES to show troubles in user interface compat.TROUBLES is a dict which contains the trouble name for each trouble according to the hg version user is using. All of the replacements are related to `hg evolve` command.

topics: list only topic names in quiet mode This will be helpful in bash completion.

topics: take logic to parse username to a separate function In next patch we will be adding support to `hg stack` to show users, and this logic will be required there too. So let's take it out in a separate function.

changelog: fix a typo in the changelog There is probably many others but that one is fixed now.

caches: switch to 'auto' warming by default This options seems good let us make it the default.

caches: add a 'auto' option for obshashrange cache warming This option will only warm the cache when used as a server.

caches: extract some config reading in 'shouldwarmcache'

caches: pass the transaction to the "shouldwarncache" logic This will allow to have smarter mode about cache warming (eg: only warm them for server transaction.

caches: record 'desc' attribute on transaction This is useful to know if a transaction if server side or not.

caches: protect against missing connection If the connection cannot be established, we should not try to use it.

evolve: don't show working directory obsolete message if we were on it This patch tweaks showing wc obsolete message functionality to not show the message if the operation led us to the same changeset we were on before and it didn't obsoleted it. This make failed updates, update on current changeset and a pull with no change omit showing the message. This has some cons like if you are on rev 1 which is obsolete and you do `hg up <revset>` where revset is some revset which resolves to the rev 1, we won't show the warning as shown earlier.

prev: jump to parent's successor if parent is obsolete and topic is involved `hg stack` shows a linear chain of commits even when they are not linear chain and some changesets are obsoleted and have successors as separate head. This is very nice to have a post evolution view of the stack. However when `hg prev` is run on an unstable changeset whose parent is obsolete and does not topic but parents successor has the topic, it shows no parent on the topic. This patch makes `hg prev` update to parent's successor and make things follow the stack order.

tests: add a test showing wrong behaviour doing `hg prev` on orphan cset If there is an unstable changeset in the topic stack, whose parent is not a part of stack but has a successor which is part of stack, hg stack does shows them in linear order, but `hg prev` on that orphan changset says no parent on that topic. However it should update to the successor of the changeset. It will be fixed in the next patch.

test: update output to 02fdb8c018aa Now that we have directaccess in core, we get a new warning message when updating to a hidden changeset. Update the tests. CORE-TEST-OUTPUT-UPDATE: 02fdb8c018aa

test: update output to 9b3f95d9783d The unstable graph nodes are now shown with the character "*", update the test outputs. CORE-TEST-OUTPUT-UPDATE: 9b3f95d9783d

stablesort: use parent filtering in a place we forgot to Freak merge striked again.

obshashrange: add a progressbar to upgrade This section is the slowest, have some progress idea would be useful.

stablerange: add an sql index on subranges id too This should speed up query that find super ranges.

obshashrange: less brutal reset when receiving markers on existing node We now target the affected ranges only. The implementation is still slow but that should be better than what we had before.

obshashrange: update the cache updating logic Use the more modern option when available. (Same as the other caches).

stablerange: cleanup the update logic

stablesort: cleanup the update logic

firstmergecache: cleanup the update logic

depthcache: cleanup the update logic

changelog: add an entry about the obshashrange changes

stablerange: be more cautious when deleting the sql connection This triggered some crash in further development. This also match what is done elsewhere with this attribute.

stablerange: clarify sql transaction logic This should help concurrent access.

stablerange: use mergepoint based algorithm for the official stable range Changing the official stable range will impact all users of the infrastructure. We update version number of the cache file and discovery methods to clarify this. We do no keep compatibility with the old method over the wire. The new algorithm is much better and keeping compat is more work than we have time for right now.

stablerange: explicitly create a stablerange entry for branchpoint method We are about to change the default.

stablerange: have a mergepoint based sql backed class Everything is so generic that getting a class is 3 line of codes.

stablerange: introduce a sql backed version of the generic on disk cache This is getting use close to actually using the new sorting and algorithm for real.

stablerange: add a base class for on disk stored stablerange class

stablesort: use on disk cache for test

caches: factorise the cache warming check The old conditional was duplicated and hard to read. We factorise everything into the `utility` module.

stablerange: use repo-carried stablesortcache That one is common to all and disk persisted

stablesort: expose the cache through the repository Let have a unique instance, keep it warm and accessible.

stablesort: implement an ondisk cache Persisting the cache on disk will be important for large repositories.

stablesort: realign a misaligned continue We should make a better use of the jump cache now.

stablesort: remove some dead code This closure is no longer in use.

stablesort: abstract all cache access This prepare an on disk version of the cache

stablerange: use first merge cache to skip over linear section If we are to skip over a large section of the range, skipping everything until the first merge seems like a good idea.

stablerange: add a new 'firstmerge' cache This cache store the first merge ancestors of a changesets. This is useful to avoid iteration over the changelog when building stablerange.

stablerange: drop unused `until` utility We no longer needs this function.

stablerange: use cached size data instead of walking the graph Less iteration is better.

stablesort: record previous segment size in the jump That was, we can skip over a full jump without walking it. We'll make use of this in the next changeset.

stablesort: move jump recording inside the exclusive function This will allow use to record to cache size of segment in a later changeset. If the exclusive set is empty, we need to record it outside that function.

stablerange: compute jump size after jump retrieval only This prepares the caching of jump sizes.

stablesort: warm jump cache more efficiently We no longer for a full depth iteration for all request: - we exit early for non-merge, - for merge, we only iterate over the exclusive area.

stablesort: use a regular dict for jumps This will help knowing what revision we have already queried or not.

stablerange: use the jump information for faster iteration Instead of doing a full iteration over the exclusive set, we compare the jump information instead. This perform the same kind of logic than before but will allow for much faster iteration once all the caches are in place.

stablesort: expose the jumps sequence to other code The stable range needs it to build exclusive subrange efficiently.

stablesort: use 'depth' in mergepoint tie breaker The parents with the most depth will is considered lower. It has a couple of advantages. 1) the more shallow parent probably have less exclusive revision, 2) it makes Oedipus merge behave like close to the linear case,

stablesort: rework jump gathering The old code was buggy in some case, the new code give the same result as the 'headstart' version.

stablesort: stop recording jump type There are no mature user of this "jump type" data and the current implementation is known to be buggy. So we drop the logic for now. This will make on disk storage simpler. The data will be reintroduced later

stablesort: pass a jump recording function instead of a list This seems cleaner to abstract the underlying storage to the lower level. This also makes use more flexible about jump detection.

stablesort: minor indent fix

stablesort: clarify subcall to the exclusive side Before doing deeper rework of this logic, we tackle the simplest parts.

docgraph: update test output with new output

stablesort: record, cache and reuse jump Iterating below a merge means two things: 1) iterate over the part exclusive to the higher parents, 2) iterate from the lower parents. While iterating on the exclusive part, there will be case were we just go the next natural parent, and case were we'll have to "jump" to another revision. If we record all point this "jump" happens and their target, we can easily reproduce the iteration in the future. With that information we can iterate over the exclusive part of the merge without having to compute it entirely. In addition we store the reason of the jump. This will help the stable range processing later.

stablesort: fix head start computation The recursion was wrong and provided wrong result. As a side effect, this seems to hint that `stablesort_mergepoint_bounded` is not giving the right result for complex set.

stablesort: avoid attempting to sort a tuple This seems silly.

stablerange: use the filterparents utility

stablesort: use the filtered parents utility

depthcache: use parents filter in depth cache

parents: add a utility to filter parents There is various strange case of merge out there that needs to be handled. We add an utility function to handle them all.

stablerange: abstract the bit able to store cache into sql The part about actually storing the range is independent of the algorithm, so we should extract this before using it for the next iteration.

stablerange: split pure algorithm part from the on disk cache The stable cache file is getting long, we split the logic about keeping data on disk into a dedicated file.

stablerange: add an assert to detect buggy range Nothing can be negative in there, we add an assert to make sure it is so.

stablerange: warn cache for all relevant ancestors range Warming cache in the right order will prevent recursion to happens and unlock usage on large repository.

stablesort: move parent range computation into its own method Now that we have running code, we'll need to avoid too deep recursion. We extract the piece dealing with the parent range before we write more code to warm it.

stablerange: drop the basic inheritance from the 'mergepoint' version All necessary bits are implemented now (except for warmup which we explicitly bypass for now).

stablerange: cache known subrange at the stablerangecached level That way, the 'stablerange_mergepoint' class also benefit from it.

stablerange: use sort cache to build 'mergepoint' information Using the walk cache gives use a better complexity we need to scale. There are further improvement we could make, but this is a good first step.

stablesort: make the iteration from head available to all This will be useful for the stablerange code to work properly.

depth: fix compare mode for `debugdepth` The compare mode was broken for silly reasons.

memfilectx: changectx argument is not mandatory As changectx argument is now mandatory for memfilectx, add a compatibility layer to pass it when necessary. The commit that made the parament mandatory in core is 8a0cac20a1ad

branching: merge stable into default

amend: fix a typo in amend help text related to the extract option s/extra/extract/

topic: fix compatibility with 4.3 A compatibility fixes ended up being overlooked, we are bringing it back into the main branch.

branching: merge stable back into default New version has been released, hooray.

packaging: mark stable change as bugfix dev version This help reduce confusion when installing non-tagged changeset.

Added tag 7.1.0 for changeset 06a3cb594956

packaging: prepare release 7.1.0

branching: revert "stable" change into default The expected output for "default" is still the same.

test-compat: merge mercurial-4.2 into mercurial-4.1

test-compat: merge mercurial-4.3 into mercurial-4.2

test-compat: merge stable into mercurial-4.3

test: backed out test change from changeset a18ca224e812 The related mercurial changeset, ad5f2b923b0d, is not in the stable branch yet.

test: backed out output change from 85ab7d2d9fd6 Mercurial core default branch does not have the related changeset yet (a7e49a5b3e6f).

branching: merge with stable

obsnote: warn if user try to store a note in obsmarker on an older hg Support to store a note in obsmarker is from hg>=4.4. We have added notes support to all the evolve commands but we do support versions which don't support storing note in obsmarker. Warn if user tries to store a note in older hg.

topic: use 'hookargs' over 'tr.changes' for flow control The 'tr.changes' attribute do not exists until 4.2.

topic: move function wrapping from reposetup to uisetup Having the function un reposetup means they get wrapped over and over again for long lived process.

test: publish the root of the repo in flow reject-untopiced The lack of default branch confuses older version

genericcaches: handle the lack of util.timer in 4.1 We do the same trick as usual.

topics: fix `hg stack` in case of split This patch fixes the behaviour of hg stack which throws an error in some cases when there are multiple successors. The case of divergence is not handled yet.

tests: add a test showing traceback on `hg stack` in case of split The traceback will be fixed in the next patch.

branching: merge stable into default

test-compat: merge mercurial-4.2 into mercurial-4.1

test-compat: merge mercurial-4.3 into mercurial-4.2

test-compat: merge stable into mercurial-4.3

changelog: add an entry for the split+branch fix The world needs to know.

branching: merge with stable

split: force the branch to fix the split bug Also restore it after the split

split: add a test demonstrating that split doesn't take the right branch Also add a test to check that the dirstate is in the right state in case the user abort the split.

stablerange: compute the subrange closure on an unfiltered repository This avoid various overhead from filtering.

stablesort: write a flat version of the algorithm This new version never needs to iterate over the full repository even when merge are encountered. Having the algorithm flat also prepare caching works since the iteration sequence can we expressed with a couple of flat loop.

stablesort: simplify processing of non-merge changesets As long as a changeset as only one parent, the next element in the sort (starting from the head) has to be that parent. We detect and take advantage of that shortcut in the non-merge case.

stablesort: extract a '_revsfrom' method Walking from the revision is usually simple unless the revision is a merge. Having this walking logic isolated will help us refine it.

stablerange: use the new cache object in the 'mergepoint' version Every improvement to the cache should reflect on the stable range from there. Since we no longer use the basic sort function, we can simplify the inheritance by dropping one layer.

stablesort: introduce a cache object The object is not caching anything yet, but the API are getting into place.