branching: merge with stable

stable-doc: note about not storing smaller range

stable-doc: small typo

stable-doc: add more advanced examples

stable-doc: add multiples example for the simple cases

test-output: oops CORE-TEST-OUTPUT-UPDATE: 181ee2118a96

test: update part count in tests An off by one error got fixed upstream. CORE-TEST-OUTPUT-UPDATE: 181ee2118a96

evolve: check that relocating makes sense in _solvedivergent() (issue5958)

tests: demonstrate content divergence causing "relocate node on top of itself"

cmdstate: introduce a "saver" contextmanager and use it in place of save() Previously, the state was only saved in some paths out of these functions. This can be problematic, if the user ctrl-c's (or `kill -9`'s) the process, or we exit out of `relocate` for anything besides the "expected" reason, we won't record that we were in the middle of an evolve. One of our users has discovered that this leaves hg in a weird state; the user did something like this: ``` $ hg evolve <something goes wrong with the merge tool, hits ctrl-c> <deals with the merge conflicts> $ hg evolve --continue abort: no interrupted evolve to continue $ hg evolve abort: uncommitted changes # Note: commands.status.verbose=True is set. $ hg status M foo # The repository is in an unfinished *update* state. # No unresolved merge conflicts # To continue: hg update ``` The user did an `hg update`, but it didn't actually do anything besides take it out of the unfinished update state (the files were still dirty in the working directory).

cmdstate: avoid setting a default argument to a mutable object (`{}`) If there's ever more than one cmdstate for the lifetime of the process, this can cause surprising behavior where the later cmdstates pick up options from the earlier ones. I've not seen any evidence this is actually causing any issues, but it's subtle enough that it should probably be fixed to help save significant debugging time later.

cmdstate: switch to new-style classes This isn't a huge issue and isn't necessary on Python3, but we're still Python2 compatible and we should be consistent (and strongly prefer new-style classes); this is the only class that is not deriving from object that I could find.

branching: merge stable into default

docs: add example for the `prune` command Giving at least one example helps clear up the syntax, especially since most options will follow a very similar pattern.

tests: add some more actions to test-issue-6028, describe what's being done This patch does two things: it explains what's happening in the test file so it's easier to understand, and also it adds checks that make sure something like swapping merge parents is not accidentally breaking anything. The primary reason to touch this test file was that it was broken by a change in core's merge.graft() that erroneously swapped merge parents. Since only evolve uses merge.graft() for merge commits and there aren't any tests in core for it, let's test it here. Plus, this test case is pretty simple and these additional checks don't make it too complicated.

topic: fix some API to make it more robust The new code can deal with changes in upstream mercurial.

rewriteutil: move allowdivergence check to foldcheck() foldcheck() calls precheck() first and then performs more fold-specific checks.

test: change to output around transaction timing CORE-TEST-OUTPUT-UPDATE: d7304434390f

branching: merge with stable There have been multiple fix on stable.

stablerange: add some data from field testing This show that in number of stable range to track stay reasonable.

stablerange: add a debugstablerangecache command The command display get some data about stable range in a repository.

stablerange: add some documentation about the general concept

stablesort: add some field data about stable sort cache

stablesort: introduce a small debugstablesortcache command This give a small insight on the cache content.

stablesort: add some documentation for stablesort This should help people to understand what is going on here.

fold: check allowdivergence before folding obsolete changesets (issue5817)

tests: demonstrate that fold doesn't care about allowdivergence config option

stack: remove unnecessary copying of rdependencies rdependencies is not modified in any way in this method, so no need to copy it.

stack: make a deep copy of `dependencies` before modifying its items The algorithm later on in this method uses .remove() to remove individual elements from items in dependencies, which before this patch modified the cached property contents. So for further use that dictionary was in the form of {1: set([])}, i.e. all sets were empty. This deep copy block could be way simpler, but the problem is that sometimes we get lists of _succs() from evolvebits.builddependencies(). Note: this happens only in topic's stack version of builddependencies() and it looks like a suboptimal way to handle multiple successors (see evolve's counterpart function). stack.builddependencies method is removed, it has served its purpose (see the previous patch).

stack: demonstrate that not reusing cached property gives different results Instead of using self._dependencies, which is a cached property, let's get fresh deps and rdeps in stack.revs method using a newly introduced stack.builddependencies method (will be removed in the next patch). This makes it easier to explain why the next patch is correct.

branching: merge with stable

changelog: add missing entry for 9af212b8565a

evolve: test that target is not orig in _solveunstable() (issue6097) `newer` is the result of obsutil.successorssets() and can be [[orig.node()]], in which case later on in this function evolve will try to rebase orig onto orig, which is not correct. So let's just check this particular case. This fix doesn't cover cases when successorssets() result contains orig.node() not at [0][0]. Such cases need tests.

tests: demonstrate an orphan changeset cause "relocate node on top of itself" See issue6097.

obslog: only indent the first chunk and chunks just after newlines (issue6175)

tests: demonstrate too many spaces in olog -p output with word-diff

rewind: add --keep flag that "doesn't modify working directory" The actual logic is more complicated than the flag description, but it's sufficiently similar to other --keep flags in action. Unlike strip (or prune), rewind always needs to modify the working directory to commit new revisions that "revive" old ones [1], see _revive_revision() (and rewriteutil.rewrite()). Because of that we don't prevent rewind from modifying wdir, but instead use hg.updaterepo() to update to the old changeset after the "revival" process is complete. Then we rebuild the dirstate based on the commit that rewind would update to without --keep. Since dirstate.rebuild() doesn't restore status of some files (added, removed, also copies and renames), we rely on cmdutil.revert(). It's a fairly crude solution and needs to be removed when implementing the missing copy tracing between oldctx and newctx (which are related only by obsolescence). [1] IOW this means that --keep doesn't allow rewinding if wdir is dirty (unlike e.g. strip).

tests: separate rewinding of merge commits, temporarily drop an error case The error case will come back in the following commit, because it organically fits there without the need of a separate working clone.

python3: add python3 beta support to the CHANGELOG

python3: mention beta Python 3 support in README

python3: add supported python versions to setup.py Mercurial technically can support Python 3.5 (although no lower, see its setup.py), but `evolve` probably won't because it represents more work for an underrepresented Python version. If you happen to *really* need evolve to work on Python 3 and you're reading this message, send an email to the mailing list, or contribute patches.

test: update output for wider cache warming CORE-TEST-OUTPUT-UPDATE: cdf0e9523de1

branching: merge with stable format source worked smoothly :-)

python3: use format-source to run byteify-strings in .py files Using the format-source extension smooth out the pain of merging after auto-formatting. This change makes all of the Evolve test suite pass under python3 and has added benefit of being 100% automated using mercurial's `byteify-strings` script version 1.0 (revision 11498aa91c036c6d70f7ac5ee5af2664a84a1130). How to benefit from the help of format-source is explained in the README.

topic: add a new random attribute (This is mostly an excuse to test the format-source setup)

python3: enforce byte prefix for vfs.open() Changeset ea8da5aa23c6e723d7f0006387a1a20eef58fc9a added raw prefix to open(), but also to vfs.open(). The latter only handles bytestring arguments.

python3: add raw prefix to sqlite isolation level

python3: add ignore block around python 2 compatibility if branch

flake8: silence F633 error

python3: add raw prefix to edge-cases kwargs-like objects

python3: add raw prefix to open()-like functions

python3: add raw prefix to all array.array() calls

python3: add raw prefix to "troubles"-related dicts The `byteify-strings.py` script cannot know that these will be used in a way that requires to use a system string without some pretty hardcore hardcoding.

python3: add raw prefix in cases harder to analyze at the token level The `byteify-strings.py` script would be a lot more complicated if it had to do backtracking and other more advanced static analysis to figure our those cases, so we have to add the raw prefix to those cases manually.

python3: add byte prefix for objects that look like kwargs but aren't The `byteify-strings.py` script has no way of knowing that those aren't acutally kwargs since it works purely at the tokenization level, so we have to add the byte prefix to their keys manually.

python3: mark all SQL queries as raw strings

python3: prefix all regex to work with python 2 and 3

pick: added support for hg abort This patch isolates abort logic for `hg pick --abort` as `abortpick()`. For independent calls via `hg abort` `hgabortpick()` is created and registered to the state detection API. Results are shown as tests.

pick: factor our the abort function This prepare the upcoming support for `hg pick` in `hg abort.

abort: added support for evolve to hg abort This patch adds support of `hg evolve --abort` to `hg abort` plan. This involves creating a `hgabortevolve()` function under `evolvecmd` which ensures abortion of evolve via `hg abort`. This function is then registered using `addunfinished()` in `__init__.py`. Results are shown as tests.

evolve: fixed lock acquire before checking state Before checking the states `repo.lock()` and `repo.wlock()` need to be acquired. This was not happening in `evolve()` earlier. This patch creates a seperate `_performevolve()` funtion which can be then called with locks acquired. This also removes the redundant lock acuquiring of `abortevolve` and `continueevolve` as lock is now taken earlier.

py3: add back a progress(0) call lost in 8664231b47ac I don't think it really matters, but it wasn't intentional, so let's just restore the old behavior.

prune: adjust 'nothing to prune' to imply user needs to specify revs to prune

rewind: working directory is the preferred term

rewind: add command synopsis

py3: make setup.py py3 compatible

branching: merge stable back into default The version has been released.

packaging: mark as development version This help to avoid confusion when installing version from source.

Added tag 9.1.0 for changeset 6f37fdad7ac1

packaging: update version number for 9.1.0 release We are about to cut a release.

changelog: add missing entry for dfd88e3fa90a

packaging: groom changelog prior to release

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge mercurial-4.8 into mercurial-4.7

test-compat: merge mercurial-4.9 into mercurial-4.8

test-compat: merge mercurial-5.0 into mercurial-4.9

test-compat: merge stable into mercurial-5.0

branching: merge the two mercurial-5.0 heads

test-compat: reverte output change from 4764e8436b2a (hg-5.1) These change where applied in evolve's changeset 88c8ef4d703c.

test-compat: reverte output change from f802a75da585 (hg-5.1) These change where applied in evolve's changeset e2c548cc83b5.

test-compat: reverte output change from c7d236b55a3e (hg-5.1) These change where applied in evolve's changeset f162cafc5000.

branching: merge default into stable to prepare 9.1.0 Time for a new version!

branching: merge stable into default

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge mercurial-4.8 into mercurial-4.7

test-compat: merge mercurial-4.9 into mercurial-4.8

test-compat: merge mercurial-5.0 into mercurial-4.9

test-compat: merge stable into mercurial-5.0

test-compat: opening test compatibility branch for mercurial 5.0 5.1 has a release candidate.

test-compat: close branch for mercurial-4.0 We dropped compatibility in 9.0.0

prune: fix small grammatical issues in help text

docs: update evolve-faq.rst with new prune flag and proper vocabulary Also strip trailing newlines.

prune: spell --successor flag without any unnecessary shortcuts If a user wants to spell out -s, it makes sense to allow that. Before this patch, prune would complain that --successor is not a recognized option. Obviously people don't usually need to spell --successors by hand thanks to shell completion (at least for Bash) using debugcomplete to see all available flags, so this patch doesn't bring any need for more typing. And thanks to Mercurial understanding shortened forms of command-line flags as long as they are unambiguous, the old-style `--succ` flags still work normally, and there are tests that use them. But two tests now use the full form to demonstrate that both ways work.

py3: redefine "troublecategories" in evolve as a dict We'll want to the keys to be bytes and the values to be unicode on py3. Having it defined as a dict makes that easier (instead of converting between the types with e.g. pycompat.sysbytes()). It was kind of ugly to convert between the forms by stripping '_' from the string anyway.

py3: store to __doc__ as str (unicode on py3)

py3: also catch ImportError when relative import fails Python 3 apparently raises an ImportError where Python 2 raised a ValueError.

py3: convert exceptions to bytes using pycompat.bytestr()

py3: use "%d" for formatting integers

py3: avoid "%s" for formatting None

py3: use "%f" for formatting floating point number

py3: fix progress() functions to not use "%s" with int Python3 doesn't support "%s" with int arguments (and not with None arguments either, which this code was also using).

py3: make random topic name generation consistent across py2/py3 random.choice() (and others based on random.randint()) changed between py2 and py3 without a way to get the py2 behavior. However, random.random() did not change, so we can re-implement random.choice() based on that.

py3: convert str to bytes before passing to core exception

py3: convert opts keys to bytes before passing to core APIs

evolve: further clarify when update is performed

py3: avoid comparing int and None

py3: avoid "%r" for list of byte strings, which produces b'' on py3

py3: avoid "%r" for byte string, which produces b'' on py3 Replaced by "'%s'", which I think is clearer anyway.

py3: replace str(ctx) by bytes(ctx) These are all for messages to the user and we don't want unicode for that.

py3: use inspect.signature() instead of inspect.getargspec() on py3

py3: use array.array.{to,from}bytes() on py3 array.array.{to,from}string() still exists on py3, but they're deprecated and generate warnings. I've put the compat function in compat.pt for now. We can move into a dedicated pycompat.py if we end up with a lot of py3 compat stuff.

py3: config values can be bytes, but never unicode

py3: call branchmap.items() on py3 and continue to call iteritems() on py2 Mercurial's source transformer also replaces the 'def iteritems(' in branchmap by 'def items(', so we need to call whichever version is there.

py3: switch from iteritems() to items() in the topics extension The only remaining iteritems() call is on branchmap. That will be dealt with in the next patch.

py3: filter() now returns a generator, so wrap when we need a list

py3: don't depend on map() iterating over its input map(some_generator()) in py2 returns a list, while in py3 it returns a generator, so the passed-in generator won't be called unless the returned one is.

py3: implement __bool__ in addition to __nonzero__

py3: replace iter.next() by next(iter)

py3: replace xrange() by range()

py3: read sqlite3 data as bytes The py2 and py3 docs ([1] and [2]) disagree how to get bytes output, but it seems obvious that this should be "bytes" to be compatible with both. [1] https://docs.python.org/2/library/sqlite3.html#sqlite3.Connection.text_factory [2] https://docs.python.org/3/library/sqlite3.html#sqlite3.Connection.text_factory

py3: sqlite3.connect() expects str arguments

cleanup: remove check only needed for hg versions before 4.4 ui.edit() has had the "action" argument since 6e6452bc441d (editor: use an unambiguous path suffix for editor files, 2017-08-30), which was first released in hg version 4.4. Since we support only versions higher than 4.5, we can drop this check.

split: remove an unnecessary (and confusingly typed) fallback revision `opts.get('rev') or '.'` is either a list of strings or just a string. It happened to work because `'.'[0] == '.'` on Python 2, but it won't work on Python 3 (for byte strings). The fallback value wasn't even needed (it was also set just after), so let's just remove it.

evolve: rename variable "children" to "child" where it's clearly singular

evolve: remove some unused variables

py3: back out 23323092f0a7 D6623 has now been accepted in Mercurial (commit 83666f011679), so evolve commit 23323092f0a7 (py3: convert _origdoc to sysstr to match __doc__, 2019-07-09) is not longer needed.

branching: merge with stable

touch: fix the inconsistent behavior of divergence catching logic (issue6107) When touching a node, the way we check if it can lead to divergence is we look at the successors sets of the rev being touched. And if there is successor revs exists (excluding the case when that successor set is (A,) for rev A) that means there will be divergence and we warn the user. This works fine but there is still a case (which is not covered by looking at successor sets) which can lead to divergence. That case is: when there is already a revision exists which is divergent to the revision being touched. And performing the touch would revive that "dead" divergence. (Dead because one of the revision is obsolete which is the one we are touching) And to see if there is any rev which is divergent to a particular rev we already have a function which we can use here i.e. `evolvecmd.divergentsets(repo, ctx_being_touched)` Changes in test file demonstrate the fixed behaviour.

touch: add test which shows touch can fail to warn about divergence

touch: clarify some inline documentation

tests: update output for new branch cache messsages from Mercurial This makes tests pass again after Mercurial commit c7d236b55a3e (py3: fix formatting of branchmap log messages with repo.filtername=None, 2019-07-14). CORE-TEST-OUTPUT-UPDATE: c7d236b55a3e

metaedit: allow operations on merge commits with some conditions As with fold (see the previous patch), it's allowed to metaedit a merge commit or a set of commits including merge commits (with --fold) as long as there are less than 2 parents of the set not included in the said set.

fold: allow operations on merge commits with some conditions It's possible to fold revision chains that include a single merge commit: just fold everything into the merge commit while saving its other parent (so it continues being a merge commit). It's also possible to fold revisions that include multiple merge commits, on the condition that they merge with not more than 2 external changesets (i.e. a changesets that aren't going to be folded).

rewind: make sure merge commits include files from p1 and p2 Otherwise rewinding a merge commit makes it lose all changes. This fix populates `updates` argument of rewriteutil.rewrite() with parent changesets. That argument is normally used for folding multiple changesets, but in this case it's simply used to include files from p1 and p2. Usually, rewrite() works fine using ctx.files(), but that function can return an empty list when ctx is a merge commit.

touch: make sure merge commits include files from p1 and p2 Otherwise touching a merge commit makes it lose all changes. This fix populates `updates` argument of rewriteutil.rewrite() with parent changesets. That argument is normally used for folding multiple changesets, but in this case it's simply used to include files from p1 and p2. Usually, rewrite() works fine using ctx.files(), but that function can return an empty list when ctx is a merge commit.

py3: make `import hgext3rd.evolve` work

py3: use bytes for template keyword registrations This makes `import hgext3rd.topic` work.

py3: convert _origdoc to sysstr to match __doc__ It's currently stored as bytes by core, so we need to convert it to match Python's expected type for __doc__. This patch can be dropped if D6623 gets accepted.

py3: use bytes for revset predicate registrations

py3: use bytes for wireprotocol command registration

py3: use byte strings for @command registrations

py3: switch from iteritems() to items()

py3: make metadata values be byte strings as Mercurial expects

tests: update output for shorted prompts from Mercurial This makes tests pass again after Mercurial commits f802a75da585 (patch: use a short, fixed-size message for last line of prompt (issue6158), 2019-06-20). CORE-TEST-OUTPUT-UPDATE: f802a75da585

tests: update output for shorted prompts from Mercurial This makes tests pass again after Mercurial commits 4764e8436b2a (filemerge: make last line of prompts <40 english chars (issue6158), 2019-06-20) CORE-TEST-OUTPUT-UPDATE: 4764e8436b2a

rewriteutil: allow rewriting merge commits (issue4561) This patch simply allows rewriteutil.rewrite() to work with commits with multiple parents (i.e. merges). That function is used in such commands as fold, metaedit, touch, rewind. The issue 4561 is marked as easy, the limitation is called unnecessary, no tests fail after this change. What can go wrong.

tests: show what happens when trying to hg touch a merge commit

evolve: further clarify that update is performed only when requested Text further modified by Pierre-Yves David and Anton Shestakov.

touch: let's not use util.acceptintervention() as it's not required

branching: merge with stable

evolve: use right value for branch name when finding branch heads subbranch already formatted as "branchname:topicname", again appending it with ":topicname" doesn't not make sense. It's a little bit surprising that no tests fails though.

evolve: fix confusion in branch heads checking logic when topic in play To provide some context, when topics are in play the branchmap cache we store contains the branch info of a rev as "branch:topic" format IIUC. Assuming that is right, now in present code we don't actually cover this part that "when looking for branch heads where we also have active topic we should look for branch='branch_name:topic' instead". And we get wrong branch heads as a result. This patch make sure that we pass right candidate to find branch heads using branchmap.branchheads() by overriding the localrepo.branchheads() Changes in test file reflect the fixed behavior.

topic: add tests to demonstrate topic confuses the branchhead checking logic While topics are in play, we store the branchheads (which has a topic) in "branchname:topicname" format. After digging into it I found that even in the case when we should have branch heads for "bname:tname" we get heads for "bname". The tests output reflect the confusion in branch head checking logic. Next patch will be fixing the problem.

evolve: fix the inconsistent behaviour of prune (issue6137) Let's not update to any revision when working directory parent is not related to the revision being pruned. Changes in test file demonstrate the fixed behaviour.

prune: add tests to demonstrate issue6137 Here we can see that prune updates off to the parent revision even when the pruned revision wasn't related with the working directory parent. A follow-up patch will fix this.

compat: fix `setupevolveunfinished` for upstream

prune: update to the successor of wdir also with --pair/--biject (issue6142) When prune is used with --pair flag, we can also update to the successor of working directory parent. No need to check len(sucs) or len(precs) here because there's a check for that earlier in the code (it's a requirement of biject). The tests are now demonstrate the correct behavior: when rev 14 was pruned with 12 as its successor, the bookmark that was on 14 was moved to 12. That bookmark was also activated (even before this patch).

tests: demonstrate prune --pair not moving bookmark correctly After `mkcommit n2` line the bookmark is on the correct changeset, but when we prune --pair the two newly created changesets (revs 13 and 14), the bookmark gets moved to their ancestor (rev 0). Instead, it should've moved to the last of their successors (rev 12).

oops: backed out changeset 7ac40b4ea24c Anton requested some changes on it.

compat: fix `setupevolveunfinished` for upstream

evolve: fix the code flow pattern of solving obswdir par and troubled revs Now we will go to _handlenotrouble() (which prints messages about no revs to solve) only when there is no troubled revs and working dir parent is not obsolete. This change also saves us from an issue which was about looking into the revset (smartset contains troubled revs to solve) when a rev from the revset gets hidden. This happens in the case when our wdir parent is obsolete. After resolving obswdir parent we were looking into the revset to check if there is any troubled revs to solve but we should have performed this check before performing the obswdir resolution. Changes in test file reflect this fixed behaviour.

evolve: refactor for consistent behavior of evolve when wdp is obsolete This patch make sure that when working directory parent is obsolete `hg evolve` and `hg evolve --all` don't behave differently.

evolve: backout 3027005c42c3 to reintroduce a bug for right fix This patch backout 3027005c42c3 as it was accepted by mistake while it was being "in-discussion" state.

pick: register pickstate as an unfinished state This way pickstate file will indicate that unfinished pick command needs to be dealt with (--continue or --abort) before modifying the repo. Otherwise it would be e.g. possible to commit during an interrupted pick and that's not expected.

pick: rename variable for unfinishedstates

pick: actually delete pickstate if --abort is given Makes pick to be, uh, actually aborted.

evolve: orphans that evolve into nothing don't need successors (issue5967) When continuing to solve an orphan that created no changes (i.e. clean wdir), _completeorphan() used to create an obsmarker that said that the result of that orphan evolution is the currently checked out changeset. That's not a correct obsmarker, because all of the orphan's changes were dropped and so it had no effect on the currently checked out changeset. This is an issue that has only existed when --continu'ing evolve, that's why the fix touches _completeorphan(), but not _solveunstable(). This fix is adapted from a similar "if node is None" block in _finalizerelocate().

tests: demonstrate obsmarker creation after discarding conflicting changes Continued evolve creates an incorrect obsmarker that says 2 is a successor of 1. It's incorrect because 1 was dropped as it created no changes to commit (after conflict resolution that discarded its changes). If evolve does the same thing in one go (e.g. just by using --tool :local and without subsequent need to continue) the obsmarker is correct.

pick: remove transaction on the whole command (issue6037) At its core, pick is a pretty straightforward and well-behaving command, it uses functions already in core hg, it checks that wdir is clean and that changeset to pick is not public, it checks if there happen to be merge conflicts and can be --continue'd later, etc. It is very similar to graft in core (it also uses mergemod.graft function), but it obsoletes the original changeset. However, graft does not experience this incorrect behavior from issue 6037. What happens in the test case for this issue when we pick a revision that touches both "a" and "b": mergemod.graft() takes the original changeset and tries to apply it to the wdir, which results in "b" being marked as newly added and ready to be committed, "a" updated with the new content and being marked as modified, but "a" also has conflicts. Pick correctly notices this and saves its state before asking for user intervention. So far so good. However, when the command raises InterventionRequired to print a user-facing message and exit while being wrapped in repo.transaction() context manager, the latter partially undoes what mergemod.graft() did: it unmarks "b" as added. And when user continues pick, "b" is therefore not tracked and is not included in the resulting commit. The transaction is not useful here, because it doesn't touch wdir (it's still dirty), it doesn't remove pickstate (and other commands will refuse to work until pick --abort or --continue), it just makes "b" untracked. The solution is to use repo.transaction() only to wrap code that writes data to hg store in the final stages of the command after all checks have passed and is not expected to fail on trivial cases like merge conflicts. For example, committing the picked changeset. But since pick uses repo.commit() for that, and because that function already uses a transaction, wrapping it in another transaction doesn't make sense.

tests: demonstrate hg pick forgetting files after conflicts This test currently passes to show that pick is behaving incorrectly.

packaging: follow hg's supported python version (>= 2.7) "Mercurial 4.3 and newer require Python 2.7." (From https://www.mercurial-scm.org/wiki/SupportedPythonVersions) Also add X- prefix, because that's the correct form, apparently. This line can also be removed in future, since "When Debian supported multiple Python versions, X-Python-Version was used, but it is obsolete now as no supported Debian release supports anything other than python2.7." (From https://wiki.debian.org/Python/LibraryStyleGuide) That page also mentions "X-Python3-Version".

packaging: require hg 4.5 also for usage, not just for building

packaging: require mercurial >= 4.5 Otherwise building the doc package fails with: (third party extension evolve requires version 4.5 or newer of Mercurial; disabling) Exception occurred: File "/usr/lib/python2.7/dist-packages/mercurial/help.py", line 624, in help_ raise error.Abort(msg, hint=hint) Abort: no such help topic: evolve

evolve: clarify why returning by adding inline doc

evolve: move a code block to have right value in has_some_val Because of this we were having wrong value of has_some_val and had some buggy behavior which is being fixed by this patch. Fixed behavior is reflected by the changes in test file.

topic: add tests which demonstrate topicset failure of FilteredRepoLookupError When topics are used, it fails to find hidden revs mentioned in a revset as we are not using unfiltered view of repo. Next patch will fix it.

pick: reduce configoverride() scope Merge tool is only needed for merge.graft() (it's what graft in core hg does), so let's make the scope of the ui.configoverride() narrower.

evolve: correct action verb in a message

evolve: internationalize a message This exact message was already wrapped in _() in the same file, just not here.

evolvecmd: the proper way to deal with conflicts is to resolve them And it's worth making the suggestion an actual hint.

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge mercurial-4.8 into mercurial-4.7

test-compat: merge mercurial-4.9 into mercurial-4.8

test-compat: merge stable into mercurial-4.9

branching: merge with 9.0.0

branching: merge back with stable

packaging: mark as development versions This help to distinct official release from in progress work.

Added tag 9.0.0 for changeset 756db65030c6

packaging: prepare release 9.0.0

doc: clarify the status of configuration of the obshashrange protocol

changelog: add various missing bits

templatekw: keep compatibility with Mercurial 4.5 This is simple enough to do.

test: adjust output to stable branch We are about to make a release.

branching: merge with stable

templates: don't alias keywords directly Putting the same function twice in the registry results in duplicate doc strings and therefore confusing "hg help template" output.

stack: remove 'topic.' prefix from colors/labels Stack is related to topics, sure, but it is also good enough to be recognized on its own.

stack: handle hash sizes when --debug flag is provided Since showstack() now uses fm.hexfunc() for node hashes, which depends on ui.debugflag, we should handle situations when hashes are full-sized as well.

stack: always provide (full) node hash to non-default --template

stack: remove unnecessary prefix from stack output with non-default --template "index" template keyword already exists (the current iteration of the loop), so "stack_index" it is. It follows the same convention as other template keywords, such as "files_added", "line_number", etc.

stack: provide context to formatter with non-default --template This allows using template keywords that we don't explicitly provide to the formatter, e.g. rev, branch and topic.

stack: leverage labelsgen() to produce all needed labels for fm.write()

stack: check if stack is empty more pythonically

stack: implement __bool__ and __nonzero__

stack: get stack data directly from stack and remove stackdata() stackdata function began its life in 137f8b04901e as a proto-stack: it computed stack revs on its own and only had one property to return, "changesetcount". Later it started to prepare and return more properties, but since b933a8068c17 it was computing revs using a getstack function. And then finally in 17749d9d3968 it started to rely on stack class entirely. It was a good function, but now, when all the logic it provided was factored into stack class, I'd say it's finally time for it to be put to rest.

stack: use stack._revs instead of stack.revs[1:] in external children revset The revset in question excludes all revs that are part of the stack. Using stack.revs[1:] works (rev #0 is stack base, which is not a part of the stack), but using stack._revs is technically more correct, because this variable is specifically designed to hold only revisions that are part of the stack.

test: update output to match the parent changesets This amend was forgotten.

topic: add a simple option to reject publishing The option is pretty basic but it can be used as base to build larger feature. The main target for going in this direction is to be able to distinct between user that are "simple contributors" pushing topic for review and the "maintainers" or "automation" that can publish changesets.

compat: adjust `wrapadd` for upstream Mercurial core updated the API in f385ba70e4af.

debian: override default value for SPHINXBUILD in docs/makefile This is the recommended Debian approach. As suggested by Debian Developer Stephen Kitt, use the approach recommended by Debian for building Sphinx documentation. See https://wiki.debian.org/Python/LibraryStyleGuide#Sphinx_documentation Also belated credit to Zash on the #mercurial channel on the Freenode IRC network, who suggested the Make variable approach in the first place.

obshashtree: move obshashtree in its own module The code no longer serve a core purpose. We just keep it because the command might be useful. We move it in a dedicated module so that it does not get in the way of other work.

obsdiscovery: drop `obshash` discovery protocol (issue6136) The protocol has been superseeded by stablerange for a long time. It is untested and more and more buggy. Since this is deprecated experimental code in an experimental code, we drop it. We keep the underlying computation and debug command around for now. They might still be useful to looks at repositories

cmdrewrite: use context manager for some locks and transactions These were the trivial cases where I didn't even need to extend the scope of a transaction or change indentation to fix it.

evolve: mention that --all is default, in list of options

touch: use util.acceptintervention() for closing the transaction It will close the transaction on InterventionRequired.

touch: use context manager for locks

touch: extract the logic of touching rev's to its own function This refactoring will also help us in using the context manager for locks in next patches and also help reducing the nested depth.

changelog: mention user merging in the changelog

evolve: consider using three way merge to get the user for div resolution This patch adds the logic to merge the users from two divergent csets considering the base (i.e three way merge). The case when all the three are different, we concatenate the two authors of divergent csets.

evolve: add tests for the case when div csets has different users

branching: merge with stable

evolve: move status msg to verbose mode in content-divergence resolution As suggested by Pierre-Yves, lets move these too verbose message for the user to verbose mode to decrease some noise.

debian: Override default value for SPHINXBUILD in docs/makefile Sphinx now defaults to Python 3 in Debian Buster, so we need to explicitly select the Python 2 version of sphinx-build for building docs.

docs: add SPHINXBUILD make variable This defaults to sphinx-build. The current use case is for the Evolve Debian package build.

topic: add test to increase code coverage in case of multiple topics This patch adds a test which cover the part that when we have one topic on top of other topic, this make sure that when evolving it's boundary are the current active topic (i.e hg stack)

changelog: --no-update is the default, recommend --update instead

topic: drop support for accessing csets in branch stack using bxx (issue6119) When topic extension is enabled and we have some cset whose hash is `b1234`, topic extension thinks that we are accessing 1234 cset in current branch stack. However that's not the case generally. Also I am not sure many people use this bxxx thing. Since we have a generic sxxx way to access csets, let's drop support for accessing csets using bxx which leads to bad behavior. Looking at the tests, we don't show bxxx in hg stack output anymore. I update the test to use sxxx instead of bxxxx.

legacy: drop the check for `obsolete._enabled` This looks like an ancient version check, and presumably `minimumhgversion` will do the same thing.

docs: drop references to the old temporary commit that was created with amend The sharing.rst page also mentions amend, but the diagrams aren't showing, so I'm not sure if they're in some other repo and needing to be updated.

templatekw: add `instabilities` alias for `troubles` Per https://www.mercurial-scm.org/wiki/CEDVocabulary

revset: switch internal uses and tests to `predecessors` from legacy name

revset: add `predecessor` aliases for `precursors` and `allprecursors` Per https://www.mercurial-scm.org/wiki/CEDVocabulary

revset: add `unstable` alias for `troubled` Per https://www.mercurial-scm.org/wiki/CEDVocabulary. The old name is still available (but undocumented) for compatibility. `Orphan` was renamed from `unstable` in core in 4.4, so this seems safe to do now.

docs: change `bumped` references to `phase-divergent` Per https://www.mercurial-scm.org/wiki/CEDVocabulary

docs: change `divergent` references to `content-divergent` Per https://www.mercurial-scm.org/wiki/CEDVocabulary

docs: change `troubled` references to `unstable` Per https://www.mercurial-scm.org/wiki/CEDVocabulary

docs: change `unstable` references to `orphan` Per https://www.mercurial-scm.org/wiki/CEDVocabulary

doc: correct a typo

docs: change `troubles` references to `instability` Per https://www.mercurial-scm.org/wiki/CEDVocabulary. There are a couple instances of 'troublesome' which probably need a word, as deriviatives of 'instability' didn't really fit. At least some of these are in the unlinked obs-terms.rst page.

docs: change `precursors` references to `predecessors` Per https://www.mercurial-scm.org/wiki/CEDVocabulary

docs: import figure diagrams with inkscape 0.92 No changes to the content here. This simply accepts the default option ("This file contains digital artwork for screen display") on the prompt when first opened, which is trying to upgrade from 90DPI to 96DPI.

messages: standardize on "working copy is now at" including "is" It seemed that we mostly used "is", but `hg next` and `hg prune` could print it without the "is".

evolve: move more of the progress-related variables together

evolve: delete dead calculation of number of troubled revisions The "count" variable is recalculated in the regular (no --continue) code path and it isn't used anywhere else (it used to be set to 1 in the --continue code path, but that now has its own progress counting).

evolve: drop nested locks and transactions All callers of _solveone() now take the locks and start the transactions, so there's no need to do that anymore.

next: start transaction before calling _solveone() All other callers do this, and I'm about to make _solveone() not create a transaction.

evolve: use single transaction also when continuing

evolve: run in a single transaction This speeds up `hg evolve --all` of a stack of 24 commits in the hg repo from 11.5s to 3.7s (3x). As can be seen in the tests, it also avoid some warnings about transiently unstable commits.

evolve: extract function for solving one revision, including merges Will make the next patch simpler.

evolve: mention that --all is the default behavior now

evolve: mention that not all successful operations currently update wdir

evolve: add progress support for --continue The progress starts where it left off when the previous command ran into merge conflicts.

evolve: reduce scope of progress-related variables

evolve: move progress-clearing out of _cleanup() The progress is only used with --all or --rev, so there's no need to clean it in any other case. It's therefore easier to clean it specifically in that case.

evolve: stop passing no-op "progresscb" into continueevolve() The "progresscb" doesn't do anything in the --continue case, so there's no need to pass it into continueevolve(). This lets us remove the --no-all that was added to the test as a workaround.

evolve: _solveunstable() update progress only once There's no need to draw it, then possibly write text over it (with --verbose), and then draw it again.

evolve: don't update progress just before clearing it _cleanup() will clear the progress, so there's little reason to update it just before (except for progress.debug=yes).

evolve: clean up progress bar also when using -r It looks like 1fe3da0b4601 (evolve: add --rev option to the evolve command, 2015-05-05) forgot to update the "showprogress" variable.

tests: add some basic testing of progress

evolve: increment progress *after* a whole merge commit is done The "re-stabilize" step was using the progress that was supposed to be for the next revision.

evolve: use util.acceptintervention() for closing transactions util.acceptintervention() will close the transaction on InterventionRequired.

evolve: use context manager for transactions

evolve: use consistent message and just re-raise InterventionRequired

evolve: use standard InterventionRequired instead of MergeFailure

evolve: don't use exception for local flow control The LocalMergeFailure class was added in 3f91654713dd (obsolete Move merge failure handling into stabilize code, 2012-08-20). I think the "if compat.hasconflict(r)" check was added later. Now that we have that check, we should use that for flow control instead. Note that this means that any unexpected exception from _relocatecommit() will now just raise (and roll back the transaction). I think that's an improvement.

evolve: reduce indentation with an early return statement

evolve: remove a useless return statement at end of function

test: move a test to an appropriate test file This patch introduce a new test file test-evolve-orphan-corner-cases.t for tests which covers corner cases.

test: improve the title of a test

test: remove duplicated test We have the test in test-evolve-orphan-split.t which is covering the same case this test does. Also this test states that evolve shows some error in split case, but now this is not the case we update to the top of splitted csets.

evolve: warn user for the metadata being lost in public divergence resolution This patch print warnings if some "extras" of a divergent changeset that is possibly important metadata which is being lost during the resolution of public divergence.

evolve: show a status message when merging leads to public cset I think it would be fine to tell the user that merging the two divergent csets while resolving public divergence resulted into the public cset itself. If you think we don't need to tell the user, then we can include this in debug-mode for debugging purposes at least.

test: use a shorter test name This is still long but easier to read.

stack: rename troubledcount to unstablecount

evolve: use --all by default (BC) allopt defaults to None to avoid touching _checkevolveopts(). If it were True by default, that function would always act like the flag was provided by user, and so using --abort, --stop, --continue or --rev on their own would never work (hg evolve will complain that you cannot specify both --rev and --all). A notable change in tests is "no troubled changesets" line that gets printed when using `hg evolve` to update to the evolved successor of working directory parent, but there were no actual instabilities.

tests: add --rev to hg evolve to reduce test changes for the next patch

tests: add --no-all to hg evolve to reduce test changes

evolve: don't update after instability resolution by default (BC)

tests: add --update to hg evolve to reduce test changes for the next patch

tests: don't create a nested repo for no reason

branching: merge with stable VErsion 8.5.0 got released

Added tag 8.5.1 for changeset 05c9dcf5512e

packaging: prepare version 8.5.1

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge mercurial-4.8 into mercurial-4.7

test-compat: merge mercurial-4.9 into mercurial-4.8

test-compat: merge stable into mercurial-4.9

evolve: fix progress display with hg<4.7 Since d1aab9d82f5b (evolve: adapt for deprecated ui.progress(), 2019-01-14), the "item", "units" and "total" are all set to default values. The last one is especially bad since it results in a "spinner" instead of a progress bar.

packaging: mark extensions as tested with 5.0

branching: merge with stable

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge mercurial-4.8 into mercurial-4.7

evolve: use merge.update() for resolving phase divergence Iterating over the manifest when tree manifests and narrowness is in play produces entries for paths outside the narrowspec that represent trees. For example, if the tests/ directory of the hg repo was not in the narrowspec (and the hg repo was using tree manifests, which it doesn't), then there would be a "tests/" entry in the manifest. The merge code deals with some of these cases. For example, it's valid to do a merge if only the local side changes directories outside the narrowspec. That allows rebasing a local commit onto a public commit that had changes to the excluded paths to work. However, _resolvephasedivergent() was iterating of the manifests, which resulted in crashes for some of our users when they tried to resolve phase-divergent commits (actually content-divergent commits that became phase-divergent after the intermediate rebase). We can fix that by relying on merge.update(), since that already handles this case. [This re-install a changeset backed out for compatibility reason]

test-compat: merge mercurial-4.9 into mercurial-4.8

compat: drop support for Mercurial 4.4

test-compat: merge stable into mercurial-4.9

compat: backed out changeset cfcb7eedc666 That changesets breaks 4.4 compat. We will reinstall it for the next version.

test-compat: adapt test output to 4.4

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge mercurial-4.8 into mercurial-4.7

test-compat: merge mercurial-4.9 into mercurial-4.8

test-compat: merge stable into mercurial-4.9

compat: fix a typo in compat patch

changelog: mention extensions isolation (issue6121)

topic: only wrap wireprotocaps for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap _pushb2phases for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap handlecheckheads for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap wireprotobranchmap for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap _headssummary for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap desthistedit for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap _destupdatetopic for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap _destmergebranch for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap gettopicrepo for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap mergeupdate for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap committext for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only affect `hg commit` behavior for repo with topic This helps repository with and without topic to coexist in the same process.

topic: only wrap workingctx.__init__ for repo with topic This helps repository with and without topic to coexist in the same process.

topic: introduce a `hastopicext(repo)` function This function check if a repository has the extension enabled or not.

tests: consolidate the public-content-divergent test cases This commit move the public-content-divergent tests in dedicated test files.

evolve: improve inline documentation for the public divergence resolution

cleanup: remove a duplicated line

changelog: mention topic compatibility

branching: merge stable back into default

tescompat: revert test change for mercurial-4.9 We should still test against mercurial-4.9 expected output.

branching: merge 8.5.0 expected output in stable Upstream stable is now for mercurial 5.0

testcompat: open a branch dedicated to mercurial 4.9 Upstream merged its default branch into the stable one to prepare for Mercurial 5.0

topic: add compatibility for writing copy metadata in changelog.add() As seen in hg 0e41f40b01cc.

serverminitopic: add compatibility for branchcache that now uses self._entries A copy of 9b0cde5efbc9.

branching: merge stable into default

packaging: mark version as development version Thsi help to reduce confusion for people using evolve from source

Added tag 8.5.0 for changeset 33c617626fd9

packaging: prepare version 8.5.0

test-compat: merge mercurial-4.5 into mercurial-4.4

branching: merge stable back into default

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge mercurial-4.8 into mercurial-4.7

test-compat: merge stable into mercurial-4.8

changelog: merge 8.4.1 and 8.5.1 entries

branching: merge stable into default

branching: merge default change into stable

branching: merge default branch in stable to prepare 8.5.0 release The release is not fully ready, but the merging is non-trivial.

uncommit: abort if an explicitly given file cannot be uncommitted (BC) This corresponds to f4147ca63d39 in the core uncommit extension.

evolve: store --update flag state in evolvestate file Part of 9c522bdfc846 that wasn't yet accepted.

state: implement cmdstate.__contains__()

changelog: mention Martin work on phase-divergence

test: revert update from 5.0 record logic This revert the test changes from 90f94231db5d.

tests: remove note about already implemented --confirm with --continue 4544067b831b made --confirm work with --continue, but didn't update/remove this comment.

evolve: use merge.update() for resolving phase divergence Iterating over the manifest when tree manifests and narrowness is in play produces entries for paths outside the narrowspec that represent trees. For example, if the tests/ directory of the hg repo was not in the narrowspec (and the hg repo was using tree manifests, which it doesn't), then there would be a "tests/" entry in the manifest. The merge code deals with some of these cases. For example, it's valid to do a merge if only the local side changes directories outside the narrowspec. That allows rebasing a local commit onto a public commit that had changes to the excluded paths to work. However, _resolvephasedivergent() was iterating of the manifests, which resulted in crashes for some of our users when they tried to resolve phase-divergent commits (actually content-divergent commits that became phase-divergent after the intermediate rebase). We can fix that by relying on merge.update(), since that already handles this case.

evolve: compat patch for recordfilter change in mercurial This patch fix the broken things because of upstream changes in recordfilter() which is being used to select the hunks interactively. It fixes the test-uncommit-interactive.t by adding the compat layer. But for test-split.t I had to fix the tests manually. To make it more clear: splitting broke at evolve side because after that upstream change now interactive mode doesn't prompt "examine change to foo" if foo is mentioned explicitly using cli; and directly jumps to hunks selection prompt (well, only if there is any changes at hunks level) And the main issue is when file which is explicitly mentioned has no changes at hunk level (for e.g copy, rename, mode change, empty new file), because in that case you don't have any control on selection of that file and it would be included automatically in first cycle of interactive selection. And this "no changes at hunks level" was the reason for test-split.t breakage as now it didn't prompt for those files which are passed on cli. To fix this I have included some content in those files to make sure that tests still demonstrate the same behaviour as they were doing before breakage. Also, I replaced some "n" with "s" as it make more sense to skip all the changes to that file in one go instead of hitting "n" multiple times (if there were multiple hunks)

test: add file cancelation scenario for phase-divergence This improve the test coverage for corner cases.

test: introduce a more complete test for phase-divergence The test the preservation of "change" cancellation in multiple situation.

test: rename test about content divergent meta data The test now use a name in line with the other content divergence test cases.

test: cleanup title and doc phase-divergent cases

test: remove remaining duplicated file This file should have been removed in d02a7c8cdee5.

test: add test for content-divergence with file removal File addition/removal tends to introduce corner case. The actual test content comes from a Martin von Zweigbergk changesets.

test: clarify changeset concent in the first content-divergence test

branching: merge with stable merge with new changeset on stable.

branching: merge with test consolidation Conflict were simple once isolated.

branching: merge with stable This merge happens before the large test consolidation on stable.

compat: drop getcachevfs, repo.cachevfs is supported in hg 4.4

evolve: when using evolve, cache files belong into the master repo

changelog: mention issue6089 fix

pick: update working dir branch (issue6089) Previously the working copy was left in an "inconsistent" state.

tests: rename test-grab to test-pick This match the new command name.

evolve: make sure div resolution don't replace the initial author (issue6113) Before this patch, divergence resolution logic taking the current user who is running the resolution command as the author of commit that will be created after merging the two divergent csets. This patch make sure that we preserve the initial author. Changes in test file reflect the fixed behaviour.

evolve: add test which demonstrate issue6113 This patch introducing a new test file which contains the test for issue6113 which is `test-evolve-content-divergent-distributed.t`. This test file is supposed to contain tests for distributed workflows. Next patch will fix the bug.

test: consolidate the content-divergent test cases This commit move most of the content divergent related test in dedicated and thematic test files.

changelog: mention the fix to issue6057

extensions: avoid enabling evolve for unrelated repositories (issue6057) The support for the `experimental.evolve` config have been there forever. So we can stop using the global variable. This help avoiding evolve to enable itself of repository that did not explicitly activated it. For example, this is useful for hgwebdir. Before this change, evolution feature had to be explicitly disabled or enabled in every single repository.

stack: improve set combination logic

stack: fix phasecache._phasesets check logic When _phasesets is not None, it's a list, and it contains set()s of revisions in a specific phase, starting from public, draft, secret and so on. But since repos are supposed to have the majority of revisions in public phase, the first element of this list is not a (potentially huge) set, but None. Previously this code tried to check if there's any element that is None, and was always finding None at index 0, so the short path was executed every time and the rest of the function was never used.

evolve: remove todo markers from a test which has been fixed

next: clarify tests related to `commands.update.check` test This clarify the test and help understand the next changeset.

stack: simplify phasecache checks in _stackcandidates()

evolve: fix divergence resolution when not merging a descendant In divergence resolution, when we merge other cset with divergent one we pass a `mergeancestor` arg to merge.update() and before this patch we were passing `mergeancestor` as True in every case. But it should be True only when we are merging a descendant onto an ancestor. When mergeancestor is True it does two things: 1) allows the merge if the destination is the same as the parent of the ctx (so we can use graft to copy commits) 2) informs update that the incoming changes are newer than the destination so it doesn't prompt about "remote changed foo which local deleted". So this patch change it to pass `mergeancestor` as True only when it is required. And changes in test file shows that it wasn't prompting either in those cases when it should (acc. to 2nd point) Test written by Pierre-Yves David, based the one updated in 5dbaabfe2c59.

test: fix a phase divergence test case to actually not contains conflict The previous test case had a conflict, but that conflict is currently not raise by phase divergence resolution. This is an independent bug to solve.

tests: use current instability names everywhere

test: apply unstability resolution to `test-unstability-resolution-result.t` The test cases in this file probably deserved to be dispatched in other more thematic test file.

test: rename and clarify content of test-unstable-content-divergent.t The troubles → instabilities renaming was not applied here.

test: rename and clarify content of test-unstable-orphan.t The troubles → instabilities renaming was not applied here.

evolve: refactor the code which swap two nodes (in divergence resolution) I see that we are using the code to swap the "divergent" and "other" node; and updating the evolvestate accordingly at many places in divergence resolution. This patch extract that code to a function. Although I don't have strong opinion on this patch. It's a volunteered patch to remove some redundancy.

evolve: remove tmpctx arg from _resolvephasedivergent() Before this patch, in _resolvephasedivergent() function we were passing an optional argument "tmpctx" which was used to store a rebased version of bumped if required. But for sake of simplicity we can achieve the same results even without passing this "tmpctx" into that function. No changes in test files demonstrate that this patch don't break anything.

doc: clarify _resolvephasedivergent role and constraint Small documentation patch before larger changes.

branching: merge with stable

evolve: unindent some lines caught by flake8 The message was: "E117 over-indented".

obsexchange: avoid importing io/StringIO module with a different name Since we're not interested in the whole module, let's shorten the imports and aviod the lint warnings. Otherwise pep8-naming complains: - import io as StringIO: N812 lowercase imported as non lowercase - import StringIO as io: N813 camelcase imported as lowercase

evolve: remove unused StringIO import

compat: add support for new arg name in memfilectx.__init__ This makes us compatible with 550a172a603b (memctx: rename constructor argument "copied" to "copysource" (API), 2019-03-19).

topic: make topics compatible with branchmap refactor See https://phab.mercurial-scm.org/D5290

evolve: compat patch to fix broken evolve obsdiscovery This patch preserve the compatibility for the changes upstreamed by e5ece0f46b40 in hg-committed.

tests: add obslog output to some tests for divergence resolution As suggested by Boris Feld.

tests: add tests for divergence resolution with split+amend As suggested by Boris Feld. G: changed tests/test-evolve-phase-divergence.t

test: use 'split' instead of 'splitted' in the tests

evolve: drop the "computing new diff message" for phase-divergence Future code update will remove this message, dropping it early clarify the future diff.

evolve: clarify output when phase-divergence resolution results in no change I found it pretty confusing that it said "committed as abcd1234" when no commit was created.

tests: reduce dependence on previous tests for setup The tests in test-evolve-phase-divergence.t built on each other for no good reason, which makes the tests hard to modify and hard to read. This patch cleans up some of them. We should clean up the rest too, but the rest won't matter for my next patch, so I haven't bothered.

branching: merge with stable

topicmap: add compatibility for branchcache that now uses self._entries

evolve: fix over-idented block

tests: create "private" repository in already-updated state I'm going to add more copies of the repo and it's easier to work with the repo if it's already been updated.

branching: merge with stable

touch: use action "touch", not "<function touch at ...>", in precheck I just got this message: abort: cannot <function touch at 0x7fde174b69b0> public changesets: f177c51ae98f It has been this way since 1b7b9acda2a9 (touch: use precheck to validate revision, 2017-07-23).

prune: use action "prune", not "touch", in precheck We have been using "touch" since 06ee4ec88190 (prune: use precheck to validate revision, 2017-07-23). That commit modified the tests, so it kind seemed intentional, but I suspect it was still just an oversight.

evolve: test a common case of public divergence evolve: in pubdiv, handle the case when public branch is behind the mutable In public divergence, when public branch is behind the mutable one the behaviour that this patch added is that we relocate the draft one to public side. This should be fine in most case, but might be an issue in some other (eg, when the draft side of the divergence is rebase away from ancestors it relies on.) Test written by Pierre-Yves David <pierre-yves.david@octobus.net>

evolve: add condition in case of pubdiv to not swap the two div csets In public divergence, we have pinned the public cset to the local side when merge is performed. And in divergence resolution implementation divergent cset is the one who is kept at the local side, so to say this in one line: we have pinned public cset to the divergent side. However, in some cases we need to swap the "divergent" and "other" but we can't swap them in case of public divergence as thought would cause an error because of not being able to relocate public cset.

evolve: add logic to handle a particular case in divergence resolution Case is: In content divergence, to check if the two csets are on different parent or same parent what we do is find gca of the two csets and then compare it with the singlesuccessors of two csets's parents. Now, if gca is same as singlesuccessors of both the csets then we conclude that both are on the same parent which is not totally correct as it is possible that both the parents of two csets are obsolete with a single successor. This patch adds the logic to cover the above metioned case correctly, deciding the part when we need to relocate a cset to other side while resolving the stack of divergent csets. Changes in test file demonstrate that before this patch we were not doing it right because it should have relocated every node to other side instead of just relocating the first one from the stack.

evolve: add a test reflecting wrong behaviour of content-div resolution This patch shows that currently the case when stack of divergent csets have different parents is not handled correctly. For a stack of csets which has different parent, right behaviour is to relocate every node before performing merge but present implementation only relocate first cset in the stack and skip relocation for the rest of csets, this is not what we expect it to do. Next patch will be about fixing this issue.

compat: add support for new arg name in memfilectx.__init__ This makes us compatible with 550a172a603b (memctx: rename constructor argument "copied" to "copysource" (API), 2019-03-19).

evolve: preserve compatibility for hg < 4.8 versions This patch make sure evolve don't break if user using a version of hg before this 7694b685bb10 patch on hg-committed.

evolve: warn user if cset desc is being lost In public divergence when merging results in same as public cset, we only create markers to solve the divergence i.e. [(public, (other,))] In this case if other cset had a desc which was different from public that will be lost. So this print out a warning message to user that desc of non-public cset is being lost. Changes in test files reflect the added behaviour.

changelog: mention latest improvement

stack: make @ (current) more important than $ (some sort of unstable) Base is still ^ even if it's currently checked out.

stack: show content and phase divergent state and symbol Replacing ' ' with '-' is just for color labels.

stack: handle external-children just like other states This also fixes color labels: previously when external-children was combined with another state, --color=debug would show something like: [topic.stack.index topic.stack.index.current - external-children|s4] Now there is a separate label for each state.

stack: optimize revset used for stack --children Since that option needs to exclude changesets on the current stack, let's just use stack.revs (that are cached) for that and skip branch() or topic() revset. st.revs[0] is the stack base, we don't consider it actual part of stack.

stack: rename unstable -> orphan That's the only instability stack can currently show, but it's about to show more and showing "unstable" for one type of instability just isn't good.

evolvecmd: compatibility with older geteffectflag() that took a tuple Before bae6f1418a95 the function took a tuple of 2 arguments instead of these 2 arguments directly.

obshistory: remove unused geteffectflag(), it's been in core since 4.4

compat: remove old vocabulary change fallbacks Mercurial 4.4 (minimal hg version evolve currently supports) already uses the new names and in fact has deprecation warnings saying that 4.4 is the last version of Mercurial to support the old names.

branching: merge with stable

evolve: fix a typo from directory to dirty

evolve: fix the dirstate after setting parents with dirty wdir (issue5930) Before this patch, during an interrupted evolve it can be confused about copies. This patch fix the dirstate when parents are changed using dirstate.setparents() with a dirty wdir. Changes in test file reflect the fixed behaviour.

evolve: add tests which shows evolve can get confused about copies (issue5930) This test demonstrate that an interrupted evolve can get confused about copies. Next patch will fix this.

test: include some documentation to describe the case briefly

split: use ui.configoverride to preserve phase while commiting As we need to preserve the phase of revision which is going to be splitted into multiple revision. This patch use ui.configoverrides to temporarily overwrite the phases.new-commit config option at the time of committing a new node.

branching: merge with stable

changelog: add entries for the recent fixes

evolve: make sure user can recover from conflict (issue6053) we make sure while continuing interrupted evolve it reach to right code This patch fix the issue6053 which is about falling evolve into unrecoverable state and this is how it call fall into it: If after some rewrite operations we reach to a point where resparent for two content divergent csets is obsolete and we hit a conflict in relocation, so now if you run `hg evolve --continue` after resolving the conflict: code execution would check if wdir parent is obsolete and run solveobswdp() rather than going to continueevolve() part and there we will hit by a "abort: outstanding uncommitted merge" And same for `--abort` or `--stop` flags. Changes in tests reflect the fixed behaviour.

evolve: add test which shows unrecoverable evolve state (issue6053)

evolve: add a test in pubdiv where only merging leads to conflict Added a test in public divergence where both the cset are on the different parent and no conflict in relocation but in merging.

evolve: cover continue case in pubdiv when merging results in same as public This patch is the part of a series which is adding support of public divergence resolution of the case when merging results in same as pubic cset. Changes made in this patch cover the --continue flag for the case: when we had conflicts in merging. Modified lines in previously added tests reflects the changed behaviour. Also added some additional tests. I guess I have covered every possbile case in test-evolve-public-content-divergent.t While reviewing, if you see any test missed please let me know. (I think there is one test missed that I will send as a follow-up)

evolve: handle a case in pubic-div when merging results in same as public In public divergence resolution, what we do is: 1) first apply content divergence resolution 2) then phase divergent resolution on resultant node of 1) case While doing case 1 it is possible that result of merging the two csets would have same changes as public one contains. And then processing the case 2 would create an empty commit which is not something we want to do. So this patch catch that same case when merging results in same as public cset and don't create a new node, instead to solve the divergence it just add a obsmarker from "other divergent" to "public divergent" i.e. [other, (public,)] Next patch will add the continue case handling for this same case. This patch also adds the tests for the different cases which are possible for the above mentioned case. There is test for continue case too which is broken in this patch and will be fixed in next patch.

evolve: rename npublicdiv to publicnode In next patches it would make more sense to use publicnode instead of npublicdiv.

evolve: in pubdiv resolution make sure that transaction get closed Before this patch it could be possible that transaction won't get closed if res is False in the pubic divergence resolution when continuing the hg evolve.

evolve: pin the public cset to local side in merging when solving public div While working on public divergence, I think it would be better to pin the public cset to local side of merge for understanding and handling the future cases without any ambiguity. Changes in tests reflect the changed behaviour.

evolve: add tests of relocation case in public divergence These tests cover the cases when "other" is behind the "public" one and we would have to relocate "other" here. It covers all the conflicting and non-conflicting cases.

branching: merge with stable

split: make sure hg split preserve the phase of splitting cset (issue6048) Before this patch, while splitting we were not taking the phase of splitting cset into account. By default new commits would have draft changes. As we know there can two possible phases i.e draft and secret in rewriting csets thing, so this adds the handling of secret phase (as default is draft) Changes in test file reflect the added behaviour.

split: add tests which demonstrate the issue6048 Next patch will fix this issue.

evolve: fix the broken behaviour on div resolution in relocation case In content divergence resolution, I see that when "relocationreq" is True which means both the cset are on different parent and relocation is required. In this case when "divergent" is the one who is behind the "other" cset in DAG, we swap them. At this point one thing we missed is to update the evolvestate['divergent']. Because of this in continue case we didn't get the right value of obsmarkers creation. In this patch I added the code to update the evolvestate when we swap them. Now as we know "divergent" and "other" can be swapped in some cases, it is better to store the intial divergent separately in evolvestate which is evolvestate['orig-divergent'] and later this value is used to update the evolvestate['replacements'] which is the track of revisions which has been resolved. Changes in tests demonstrate the fixed behaviour.

evolve: change in a test which demonstrate divergence resolution can break This patch just add "--any" flag to "hg evolve --content-divergent" in a test and changed output reflect that there is something which is not handled correctly. After looking into code I found that it is because of using a evolvestate value which is not updated i.e evolvestate['divergent'] Next patch will fix this problem.

tests: update the title of a test as it's not what it says I see that this test has conflict in relocation and in merging also. We do have a test for the case when only relocation leads to conflict.

obsexchange: avoid importing io/StringIO module with a different name Since we're not interested in the whole module, let's shorten the imports and aviod the lint warnings. Otherwise pep8-naming complains: - import io as StringIO: N812 lowercase imported as non lowercase - import StringIO as io: N813 camelcase imported as lowercase

evolve: remove unused StringIO import

evolve: unindent some lines caught by flake8 The message was: "E117 over-indented".

branching: overwrite broken merge with a correct one Thanks goes to Anton Shestakov for spotting and fixing this.

branching: merge with stable

branching: merge with stable

obshistory: omit keyword arguments with default values in patch.diffui() calls d4c9eebdd72d made that function not take "relroot" and "prefix" anymore, and instead expect "pathfn". These two chunks of code in this patch simply generate patches for obslog -p and they broke because they tried to provide default values for "prefix" and "relroot" for no apparent reason (and also for "changes"). Let's instead rely on defaults of patch.diffui().

branching: merge with stable

test: wider another time matching in prev/next lock testing There does not seems to be a reasons for specifically matching 4-6 seconds. Wider matching will avoid intermittent failure.

branching: merge with stable

test: wider time matching in prev/next lock testing There does not seems to be a reasons for specifically matching 4-6 seconds. Wider matching will avoid intermittent failure.

topic: make topics compatible with branchmap refactor See https://phab.mercurial-scm.org/D5290

prompts: use 1-indexing in revselectionprompt() The consumer is generally a human, not a computer. I've made the mistake of entering "1" instead of "0" a few times myself.

test-split: split now ignores diff.* settings From 66399f2e92aa: "It is assumed by the author that the `[diff]` section is primarily for *viewing* diffs, and that it is unlikely what people intend when attempting to commit or revert."

pick: add --tool for hg pick to specify mergetool This patch used configuration override to enable you to pass a mergetool via the --tool flag in case there is any merge conflict.

revset: use getintrange() to parse relation subscript After 13f7a6a4f0db parsing the tokens into usable values needs to happen inside subscript relation functions.

branching: merge with stable

compat: pass contexts to _findlimit() (issue6066) Now _findlimit() in copies module accept context instead of rev number. See https://phab.mercurial-scm.org/D5595

packaging: fix debian changelog

changelog: add relevant entries

evolve: add test for the case where public divergence on difference parents This test make sure that public divergence resolution also handle the case when divergentes changeset does not share the same parent at one end because one end simply rebase. The other side has actual an actual diff change. For now this would work only for the case when we need to relocate the mutable one. Other case is still left to work on.

evolve: update the public divergence resolution logic to cover --continue case To continue the interrupted evolve in case of public divergence: we will have to store the node of that public cset which was in content divergence with the other cset, so that we can perform the phase divergence resolution between that public cset and a newnode which is the result of content-divergence resolution. Added tests reflect the behaviour this patch adds.

evolve: add logic to resolve content-divergence with a public cset Public content-divergence is the divergence where a cset is content-divergent with a public cset. To solve public divergence: 1) perform content-divergent resolution 2) resultant node is phase divergent 3) perform phase divergence resolution It is the intial logic to solve public divergence. Next patches will be the covering the cases of: 1) relocation: when we need to relocate to node 2) continue: to add this resolution in case of --continue 3) the case when content-divergence resolution gives a result similar to public cset. Added test-evolve-public-content-divergent.t reflect the added behaviour.

evolve: introduce function to create a obsmarker relation even for public cset To create obsmarkers we use obsolete.createmarkers() function, but because of security reasons this function refuses to create obsmarkers for public cset. And we need to create obsmarkers for a public cset while solving public content divergence. So introducing this function which create a obsmarker relation even for immutable cset. Currently this function create obsmarker for a single relation, in contrast of obsolete.createmarkers() which create markers for multiple relations. Upcoming pathces will be using this function.

topic: make ranges work in revset relations like 'foo#stack[1:2]'

topic: simplify #stack index check/access Also using stack.revs instead of list(stack). It's equivalent and stack.revs is @propertycache'd.

topic: make ranges work in revset relations like 'foo#topic[1:2]' Since #topic is very similar to #generations, we reuse the function directly. Few tests because #generations is already tested in core.

evolve: add description of function solveobswdp

evolve: document the "if not shouldupdate" block I missed the "not" in "if not shouldupdate: ... hg.updaterepo()" and it took a long time for me to realize it's about updating *back* to the original commit (or to its successor). Let's add a comment to maybe help the person not make the same mistake.

evolve: make "startnode" consistently be a node, not a context This fixes a bug where we didn't print "working directory is not at ..." after `hg evolve --continue` because we were comparing a node and a context.

evolve: use context managers for locks and transaction

prune: use scmutil.cleanupnodes()

uncommit: use scmtutil.cleanupnodes()

amend: use scmutil.cleanupnodes() with --patch

pick: use scmutil.cleanupnodes() A side-effect is that `pick` should now also move bookmarks.

fold: use scmutil.cleanupnodes() scmutil.cleanupnodes() has existed since 4.3 and had the metadata argument since 4.4, so we can now safely depend on it.

revset: subscriptrelations functions now have two bounds

branching: merge with stable A new version has been released

packaging: mark as development version

Added tag 8.4.0 for changeset 8c4289d0e91e

packaging: prepare release 8.4.0

minitopic: add warning about extensions state and testing

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

branching: closing test-compat branch for mercurial-4.3 We are dropping support for this version.

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge mercurial-4.8 into mercurial-4.7

test-compat: merge stable into mercurial-4.8

changelog: explicit the part related to topic

branching: merge with future version

branching: start branch for test compat with Mercurial 4.8

test-compat: reverse test change from 9bce7e6c18b3 This change are 4.9 only

test-compat: reverse test change from db87432df8de This change are 4.9 only

test-compat: reverse test change from ac39cfb5bddd This change are 4.9 only

branching: merge stable into default prior to new version

branching: merge wit stable

obsdiscovery: use consistent filtering during discovery If we computed revision using an unfiltered repository, we should run the discovery unfiltered too.

evolve: make sure we don't stop after evolution of obsparent (issue5881) Before this patch, we were not handling the case when revset given by user also contain wdir parent which is obsolete. We were explicitly checking if wdir parent is obsolete, then update to its successor and return; without checking if we still have some revisions to be evolved. This patch make sure that after it update to the successor of obsolete parent it doesn't stop and continue to evolve other remaining revisions. Changes in tests/test-evolve-issue5881.t reflect the fixed behaviour.

evolve: extract "update" code into its own function This patch moves the code to a function which handles the case when wdir parent is obsolete and evolve will just update to its successor. And extraction of this to a function will also help us to fix the issue5881.

evolve: add test case for issue 5881