Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Mar 2014 21:57:41 -0700] rev 880
exchange: fix push markers over wire protocol for http peer
Http actually interpret the data passed to _callpush expecting them to a bundle.
Interpretation of a markers stream as a bundle obviously led to crash.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Mar 2014 21:55:41 -0700] rev 879
exchange: expose length of pushed markers
http wireprotocol will need it.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Mar 2014 22:09:26 -0700] rev 878
simple4server: update "from <changeset>" statement
Could obviously not do it in the same changeset than the original changes.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Mar 2014 21:35:54 -0700] rev 877
exchange: fix changeset pulling over http
http compress its stream. The were building a bogus stream where the first 10
bytes where uncompressed. Confusing the client.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Mar 2014 22:08:21 -0700] rev 876
simple4server: update "from <changeset>" statement
Could obviously not do it in the same changeset than the original changes.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Mar 2014 21:34:36 -0700] rev 875
exchange: properly wrap wireprotocol capabilities
Just wrapping the module function only works for ssh. Ssh gets capability
through the `hello` command. We also need to wrap the function stored in the
command dict. This fix discovery for http peer.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Mar 2014 17:40:38 -0700] rev 874
simple4server: add origin and documentation to most function
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Mar 2014 16:54:08 -0700] rev 873
evolve: add 2.9.1 compatibility seal to simple4server
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Mar 2014 16:52:46 -0700] rev 872
simple4server: fix a missing import
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Mar 2014 16:27:21 -0700] rev 871
evolve: update version compatibility error message
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 07 Mar 2014 14:46:45 -0800] rev 870
exchange: fix pull over wire protocol
Actually hand pulled obsolescence markers to the pull logic.
In the wire protocol case we did not reset the position of the file pointer
after writing the pulled data. This lead the pull logic to thing that no markers
were send at all.
This changeset fix this client side bug.
(apparently no test check both markers pulling and wireprotocol)
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 06 Mar 2014 12:15:04 -0800] rev 869
exchange: enforce permission on new wireprotocol command
hgweb needs an explicit declaration of the permission level of each commands.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 05 Mar 2014 19:08:58 -0800] rev 868
merge stable
André Sintzoff <andre.sintzoff@gmail.com> [Sun, 02 Mar 2014 15:19:31 +0100] rev 867
evolve: fix typos in uncommit docstring
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 05 Mar 2014 15:21:21 -0800] rev 866
simple4server: add the wireproto command for obsolescence markers discovery
This come with its usual train of duplicated utility.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 05 Mar 2014 15:14:40 -0800] rev 865
discovery: use the discovery process for pull
Wow! Such speed! Much functional! Very proof on concept implementation!
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 05 Mar 2014 15:09:07 -0800] rev 864
discovery: implement a discovery process and use it for push
Much faster! So functional! Very proof on concept implementation! Wow!
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 05 Mar 2014 16:58:56 -0800] rev 863
discovery: first version of the "hash tree" idea
We build a hash for each node based on the markers that applies to it and the
hash of its parent. This will allow a kind of discovery process for markers.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 04 Mar 2014 11:34:38 -0800] rev 862
evolve: update changelog with recent advance
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 04 Mar 2014 11:31:11 -0800] rev 861
merged 3.3 release into default
Some of the default content was released in 3.3.0 the other ones are moved to
3.4
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 04 Mar 2014 11:14:24 -0800] rev 860
Added tag 3.3.0 for changeset 83882f2fbecb
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 04 Mar 2014 11:14:15 -0800] rev 859
prepare 3.3.0 release
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 19 Feb 2014 18:14:20 -0800] rev 858
evolve: drop `latercomer` and `conflicting` compatibility.
Those old alias are deprecated for a long time now. All computations related to
troubles are in Mercurial core for multiple versions.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 19 Feb 2014 18:03:13 -0800] rev 857
evolve: use flag value from core for bumped fix
This flag is available from core for a long time, lets use it directly from
there.
This commit intend to cleanup old stuff from the evolve extention.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 20 Feb 2014 13:32:04 -0800] rev 856
test: get rid of all reference to conflicting changesets
They are now called divergent for a long time.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 04 Mar 2014 11:02:42 -0800] rev 855
merge various improvement to stable
We want a good stable state before starting massive changes in default for
obsolescence marker update.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 22:46:46 -0800] rev 854
exchange: add progress bar when pushing using wire protocol command
Progress bar on pull was only available for pushkey based push before this
changeset. This implementation is very hacky but we are still at a proof of
concept stage for those new exchange method.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 22:18:05 -0800] rev 853
exchange: add progress bar when pulling using wire protocol command
progress bar on pull was only available for pushkey based pull before this
changeset.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 21:37:18 -0800] rev 852
exchange: fix pulling from simple for server
There is far too much code duplication down there.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 21:23:52 -0800] rev 851
exchange: add test case for D.4
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 21:23:46 -0800] rev 850
exchange: add test case for D.3
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 21:23:42 -0800] rev 849
exchange: add test case for D.2
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 21:23:36 -0800] rev 848
exchange: add test case for D.1
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 20:48:06 -0800] rev 847
exchange: add test case for C.4
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 20:42:21 -0800] rev 846
exchange: add test case for C.3
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 20:39:50 -0800] rev 845
exchange: add test case for C.2
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 20:36:47 -0800] rev 844
exchange: add test case for C.1
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 20:28:03 -0800] rev 843
exchange: add test case for B.7
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 20:21:27 -0800] rev 842
exchange: add test case for B.6
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 20:09:27 -0800] rev 841
exchange: add test case for B.5
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 20:00:45 -0800] rev 840
exchange: add test case for B.4
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 19:51:18 -0800] rev 839
exchange: add test case for B.3
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 19:39:20 -0800] rev 838
exchange: add test case for B.2
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 19:33:00 -0800] rev 837
exchange: add test case for B.1
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 18:51:54 -0800] rev 836
exchange: add test case for A.7
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 15:31:39 -0800] rev 835
exchange: add test case for A.6
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 15:21:01 -0800] rev 834
exchange: add test case for A.5
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 15:14:48 -0800] rev 833
exchange: add test case for A.4
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 14:59:43 -0800] rev 832
exchange: add test case for A.3
Allow arbitrary arguments to dotest. This allow to push --force when the push
creates more heads.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 14:03:41 -0800] rev 831
exchange: automate the testing process too
we now have: dotest TESTNAME [TARGETNODE]
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 13:27:53 -0800] rev 830
exchange: have a function doing all the common initial setup
This will help creation of further test.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Mar 2014 13:12:50 -0800] rev 829
exchance: add a common setup script for all test
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 28 Feb 2014 16:36:37 -0800] rev 828
exchange: add test case for A.2
Testcase defined here: http://mercurial.selenic.com/wiki/ObsolescenceMarkersExchange
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 28 Feb 2014 16:21:22 -0800] rev 827
exchange: add test case for A.1
Testcase defined here: http://mercurial.selenic.com/wiki/ObsolescenceMarkersExchange
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 28 Feb 2014 13:45:59 -0800] rev 826
exchange: add the pullmarker wireproto command to simple4server
This will allow simple server side support.
(yes, code duplication is bad I already told you I won't do it too much mom)
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 28 Feb 2014 13:44:37 -0800] rev 825
exchange: extract computation of pulled markers boundary in a function
I expect massive experimentation on this specific aspect. so we better isolate
it.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 28 Feb 2014 13:38:19 -0800] rev 824
exchange: pull markers relevant to the pulled subset only
With the command recently introduced we can select to pull only markers relevant
to some nodes. We are now pull all markers for all node in the relevant subset.
We'll try to pull less (just markers for node where local and remote marker
diverge) later, but we need some marker discovery mechanism for that. which are
not easy.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 28 Feb 2014 13:25:34 -0800] rev 823
exchange: add a new method to pull markers
It has both local and wire protocol implementation. This command does not
requires escaping of the marker and are expecting to me highly faster than the
pushkey method.
The other main point is that command is to accept a `heads` and `common`
argument to select to pull changeset only relevant to a set a of node.
We are not using this capability yet but we'll do it soon
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 28 Feb 2014 00:55:34 -0800] rev 822
exchange: add the pushmarker wireproto command to simple4server
This will allow simple server side support.
(yes, code duplication is bad, I won't do it too much mom)
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 28 Feb 2014 00:40:29 -0800] rev 821
exchange: introduce a wireprotocol command to push markers
Pushkey is not adapted to transmit a stream of binary data. We used it as a hack
so far. We add a new wire protocol command to speed the things up (and also push
all the markers in a single transaction). The proper way to do it is to
introduce bundle2 in core, but this will already help in the mean time.