Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 15:31:06 +0200] rev 3101
test-compat: revert output change from bundle2 capability
This backout changeset dd3eda2f7a89 not relevant for verison < 4.4.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 15:30:42 +0200] rev 3100
test-compat: revert output change on pull report
The revert the changeset from 8feb2cae7eae. Not relevant for verison < 4.4.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 15:30:16 +0200] rev 3099
test-compat: revert output change from 'phase' part
The output change were introduced in changeset from 87e349f617f9 and it not
relevant for version lower than 4.4.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 17:23:12 +0200] rev 3098
test-compat: revert output change from using core obsfate
The output update arrives in e91ca8b5ecf7.
This output is only relevant for Mercurial 4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 21:29:14 +0200] rev 3097
topic: do to check to topic while amending
Right know the 'topic-mode' mess with amend. Especially in case of amending
merge where the merge is not properly detected.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 21:43:13 +0200] rev 3096
topic-mode: add missing end line in topic-mode warning
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 20:58:35 +0200] rev 3095
compat: work around the lack of configoverride in mercurial 4.0
The phase preservation will stay broken on 4.0 and below
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 19:29:56 +0200] rev 3094
compat: add an abstraction for 'scmutil.cleanupnodes'
The usage of the function was added in 103244e34a9c but is not compatible with
Mercurial <= 4.2.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 18:56:15 +0200] rev 3093
compat: conditionally access config item
Version 4.2 and below do not have config items support. So the extensions helper
do not register anything.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 18:50:26 +0200] rev 3092
compat: handle version where obsutil is not available
Version older than 4.3 is do not have the obsutil option. We need to handle
that.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 18:19:01 +0200] rev 3091
test: use node instead of rev in topic push tests
This makes the test more stable when revision number changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 17:12:03 +0200] rev 3090
test: use node instead of rev in uncommit -i test
This makes the test more stable when revision number changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 15:20:20 +0200] rev 3089
branching: create the mercurial-4.3 test compatibility branch
This branch will contains the expected test output with 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 15:18:51 +0200] rev 3088
branch: merge with stable to prepare 6.7 release
In addition, Mercurial 4.4-rc is out, so we need to update the expected output.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 15:13:28 +0200] rev 3087
changeloge: add details about topic-mode
Boris Feld <boris.feld@octobus.net> [Fri, 20 Oct 2017 14:00:30 +0200] rev 3086
effect-flag: remove wrapping of createmarkers for Mercurial 4.4
Now that effect-flag has landed in Mercurial 4.4, we don't need to wrap
createmarkers for this version anymore.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 14:56:03 +0200] rev 3085
stack: order the adjective of changeset
The new order give more interesting result:
* base current
* base unstable
* current unstable
It seems more harmonious this way. Base seems the most core and immutable
adjective describing the element. Then current is a volatile but important one.
Finally, unstable is less information than current, so it goes last.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 15 Oct 2017 00:03:59 +0530] rev 3084
stack: show current and unstable also for t0 and bases
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 20 Oct 2017 12:04:45 +0200] rev 3083
obsfate: use core version of obsfate if available
Let us use the upstream version whenever available. The operation display is
currently disabled to ease with the test changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Oct 2017 18:18:43 +0200] rev 3082
topic: register config items
There is a couple more hoops to jump through but all config items used are now
registered.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Oct 2017 18:17:47 +0200] rev 3081
directaccess: register config item if possible
Mercurial 4.4 warns about unregistered config.
Boris Feld <boris.feld@octobus.net> [Thu, 19 Oct 2017 14:46:06 +0200] rev 3080
evolve: registed configitems if available
The config are registered as 'dynamicdefault' because we still need to
explicitly pass the config option for older version of Mercurial. (4.2 and
before).
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Oct 2017 21:23:21 +0200] rev 3079
inhibit: compatibility with 4.4-rc
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Oct 2017 20:01:00 +0200] rev 3078
branching: merge with stable
Merge with the inhibit fix.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Oct 2017 19:56:18 +0200] rev 3077
inhibit: respect '--keep' when handling rebase clean up
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 18 Oct 2017 19:00:56 +0200] rev 3076
test: adapt to change from 537de0b14030
If we use phase for pull/push this impact some debug output.
CORE-TEST-OUTPUT-UPDATE: 537de0b14030
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Oct 2017 17:12:38 +0200] rev 3075
test: adapt to output change from eb586ed5d8ce
Core have a more verbose output on pull. We have to update tests with it.
CORE-TEST-OUTPUT-UPDATE: eb586ed5d8ce
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Oct 2017 17:35:05 +0200] rev 3074
compat: fix compatibility with new duplicatecopies
Changeset 754b5117622f updated the signature of 'copies.duplicatecopies'.
We can now handle the multiple version of that code for compatiblity.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 14 Oct 2017 19:14:27 +0200] rev 3073
topic: remove 'ass' from the random animal list
As much as I love donkey… this generate inappropriate names.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 14 Oct 2017 19:08:22 +0200] rev 3072
config: stop passing useless default value to config
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 14 Oct 2017 19:06:06 +0200] rev 3071
branching: merge with stable
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 14 Oct 2017 18:56:42 +0200] rev 3070
changelog: add about fixed bookmark and phase handling while changing topics
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 14 Oct 2017 18:55:43 +0200] rev 3069
changelog: add about pager support
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 13 Oct 2017 06:10:41 +0530] rev 3068
pager: add support to `hg evolve --list`
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 13 Oct 2017 06:08:32 +0530] rev 3067
pager: add support to `hg obslog`
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 13 Oct 2017 06:06:09 +0530] rev 3066
pager: add support to `hg topic`
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 13 Oct 2017 06:02:56 +0530] rev 3065
pager: add support to `hg stack`
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 14 Oct 2017 20:17:25 +0530] rev 3064
pager: add a function in compats to start pager
This will help us enabling pager when ui.pager API exists. Also we can try
plugging in the old pager API in this function and we won't have to change
anything.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 14 Oct 2017 02:39:21 +0200] rev 3063
metadata: cleanup metadata file
I'm not sure how this conflict marker survived the pre-publish test run...
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 13 Oct 2017 20:32:50 +0200] rev 3062
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 13 Oct 2017 20:28:21 +0200] rev 3061
topic: remove a silly duplicate in a revset
Spotted by Pulkit Goyal. More performance win seems to exists here, but we
starts with the obvious.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 13 Oct 2017 10:18:52 +0530] rev 3060
topics: show changesetcount, troubledcount and headscount by default
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 13 Oct 2017 10:01:38 +0530] rev 3059
topics: use stack.stack() instead of stack.stackdata()
stack.stackdata() also calls stack.stack() internally. Moreover if we just want
to calculate changesetcount, troubled count, it will be cheap to calculate using
stack.stack rather than stackdata().
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 22:48:43 +0200] rev 3058
packaging: mark version as bugfix dev version
This avoid confusion when installing non tagged version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 22:40:41 +0200] rev 3057
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 21:12:14 +0200] rev 3056
Added tag 6.7.1 for changeset 430ad68292d7
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 09 Oct 2017 19:39:13 +0530] rev 3055
obslog: remove the word "yet" from "No patch available yet"
"yet" was a bit confusing as it let me think that patch is currently not
available but can be available sometimes later. This is true for cases when it
says "context not local" but we have more messages like "no successors", "too
many successors", "changesets rebased" where we can't have a patch.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 09 Oct 2017 19:35:32 +0530] rev 3054
obslog: spell out successor completely
If the successor is not known locally, obslog says `succ is unknown locally`
which is not a good message. This patch makes sure succ is spelled out
completely as successor.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 16:28:50 +0200] rev 3053
readme: update readme with latest fix
(also more the stack one in the right location).
Boris Feld <boris.feld@octobus.net> [Tue, 10 Oct 2017 15:52:55 +0200] rev 3052
obsfate: make the user list more readable
Separate each user in the obsfate user list by a space for readability.
Boris Feld <boris.feld@octobus.net> [Tue, 10 Oct 2017 15:28:03 +0200] rev 3051
obsfate: fix user filtering in obsfate-printer
Only hide current user only if it's the only one that create obs-markers.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 16:22:21 +0200] rev 3050
obsfate: add a test with user both current and other
This will help highlight change in the next changesets.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 16:12:44 +0200] rev 3049
obsfate: update test
The obsfate templatekw and the obsfateprinter behavior was different when
displaying or not the current user in obsfate users.
Update the test to makes the behavior fix more visible.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 16:06:22 +0200] rev 3048
packaging: prepare version 6.7.1
The are an important fix on evolve and another important fix for topic
performance, let us make a release.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 16:02:44 +0200] rev 3047
readme: add changelog for topic 0.3.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 16:02:23 +0200] rev 3046
add mention of the topic 0.3.0 version
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 16:02:04 +0200] rev 3045
readme: fix evolve 6.7.1 entry
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 10 Oct 2017 15:47:11 +0200] rev 3044
topic: reorder revset for faster evaluation
When running the revset on unfiltered repository, the mutable set can get huge.
So removing the obsolete changeset first provide a large speedup. This resolve
the performance regression we were seeing since the 6.7.0 release.
Aurélien Campéas [Mon, 09 Oct 2017 17:42:30 +0200] rev 3043
topics: use stack rather than stackdata when one only wants the changeset count
There might be a significant performance impact.
Might resolve #309.
Boris Feld <boris.feld@octobus.net> [Thu, 28 Sep 2017 21:35:29 +0100] rev 3042
log: update obsfate output order
Always display successors after the verb. So instead of "rewritten by boris as
X", display "rewritten as X by boris".
07b9fcf8b6d3 did update template-based obsfate but forget to update
obsfatelineprinter.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 06 Oct 2017 10:28:09 +0200] rev 3041
test: remove bashism in test-topic-change.t
The test was broken on various machine using shell not supporting the
`{start..end}` construct.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 05 Oct 2017 19:35:58 +0530] rev 3040
topics: handle phase correctly while changing topics
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 05 Oct 2017 19:30:22 +0530] rev 3039
tests: add test showing change of phase while changing topic on secret commit
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 05 Oct 2017 19:20:20 +0530] rev 3038
topics: use scmutil.cleanupnodes to create markers while changing topics
Earlier if we change topics on changesets with bookmark, the bookmark is not
moved to the new changeset as we didn't add that logic and we were creating
obsmarkers directly. This patch calls scmutil.cleanupnodes to create obsmarkes
which also handles the bookmark movement.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 05 Oct 2017 18:13:52 +0530] rev 3037
tests: add a new test for testing changing or clearing topics
test-topic.t is getting bigger and bigger. This patch introduces a new test
which includes test for clearing and changing topics.
Since the tests are moved to a new file, this patch, removes those tests from
test-topic.t also.
Matt DeVore <matvore@google.com> [Tue, 03 Oct 2017 11:14:29 -0700] rev 3036
obscache: do not check of argument count of wrapped function
After talking with the original author of this check, it appears that it never
worked properly, since _readmarkers was always wrapped with @util.nogc.
Anton Shestakov <av6@dwimlabs.net> [Tue, 03 Oct 2017 22:51:00 +0800] rev 3035
legacy: rename lookup_errors to not be in all caps (flake8 warning)
flake8 has a plugin, pep8-naming, which is not installed by default, but is
used if available, no extra config required. This plugin checks names of
variables, classes, functions and so on against PEP-8, and it complained about
this variable:
N806 variable in function should be lowercase
Since this isn't a module-level constant, but just a helper variable used only
in one function, it's fine to just rename it.
With this error gone, flake8 output (used plugins: mccabe, naming, pycodestyle,
pyflakes) is totally clean.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 01 Oct 2017 15:32:29 +0530] rev 3034
randomname: fix the header of the file
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 01 Oct 2017 15:22:37 +0530] rev 3033
topics: move README-topic as hgext3rd/topic/README
Before improving the docs about topics, lets move them into the topics folder.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 01 Oct 2017 11:23:21 +0100] rev 3032
README: move CHANGELOG to a new file
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 01 Oct 2017 11:18:36 +0100] rev 3031
test: small cleanup in test-topic-mode.t
remove the mention of "new" (this won't be new soon) and use the official config
name.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 01 Oct 2017 11:13:38 +0100] rev 3030
test: add support for random-all topic mode
The 'random' mode no longer generate a random topic for merge.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 01 Oct 2017 10:44:23 +0100] rev 3029
test: rename test-topicmode to test-topic-mode
This is easier to read.
Boris Feld <boris.feld@octobus.net> [Sun, 01 Oct 2017 00:35:28 +0100] rev 3028
topicmode: add 'random' topic mode
That mode will generate a random topic name when the user is about to commit an
untopiced changeset.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 01 Oct 2017 09:10:48 +0100] rev 3027
topic: update the topic-mode hint
The hint is now shorter and reference the documentation. That should provide
more concise output with more details for user who seeks it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 01 Oct 2017 09:05:42 +0100] rev 3026
topic: rename the 'topic-mode' help subtopic
This will help making reference to it in warning.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 01 Oct 2017 00:44:41 +0100] rev 3025
topic: add a 'enforce-all' mode
The mode abort for all commit without a topic, even merges.
Boris Feld <boris.feld@octobus.net> [Sat, 30 Sep 2017 23:18:29 +0100] rev 3024
topicmode: 'enforce' topic mode, no longer warn about untopiced merge
merging a topic back in a branch is common case, it seems sensible to not pester
the user about it.
Boris Feld <boris.feld@octobus.net> [Sat, 30 Sep 2017 23:00:21 +0100] rev 3023
topicmode: add new warning topicmode
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 01 Oct 2017 00:14:19 +0100] rev 3022
topic: add documentation for the 'topic-mode' option
This should help people to discover it.
Boris Feld <boris.feld@octobus.net> [Sat, 30 Sep 2017 22:42:52 +0100] rev 3021
test: update tests to use topic-mode enforce
Boris Feld <boris.feld@octobus.net> [Sat, 30 Sep 2017 22:24:24 +0100] rev 3020
topic: migrate experimental.enforce-topic to experimental.topic-mode
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 30 Sep 2017 12:35:49 +0100] rev 3019
test: adapt to output change from 10e162bb9bf5
The changeset 10e162bb9bf5 in code extend the list of capabilities to include
"phases=['heads']" this has a minor impact on test output
CORE-TEST-OUTPUT-UPDATE: 10e162bb9bf5
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 30 Sep 2017 11:38:08 +0100] rev 3018
merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 30 Sep 2017 11:11:04 +0100] rev 3017
stack: handle basic case of splitting with crash
hg stack used to crash horribly whenever a split was encountered. This is no
longer the case.
If the result of the split (or there successors) produce a sensible linear
result with on final head, we can just assume that head is the evolution
destination.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 25 Sep 2017 02:29:41 +0530] rev 3016
tests: update test output with commit 4f969b9e0cf5 in core
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 25 Sep 2017 02:23:36 +0530] rev 3015
tests: update test output with commit ecc96506c49d in core
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 16:30:43 +0200] rev 3014
packaging: update version to match development version
This helps avoid confusion when installing from source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 16:26:30 +0200] rev 3013
packaging: merge stable back into default
6.7.0 has been released.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 16:24:44 +0200] rev 3012
packaging: mark stable branch as dev bugfix version
This help avoiding confusion when installing evolve from sources.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 16:18:24 +0200] rev 3011
Added tag 6.7.0 for changeset 3a4f75c6619c
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 16:18:11 +0200] rev 3010
packaging: update debian changelog
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 16:15:56 +0200] rev 3009
packaging: update version number and testedwith version
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 01:44:29 +0200] rev 3008
packaging: mark version 6.7.0 in the source
Version ready to be released.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 01:41:46 +0200] rev 3007
packaging: update compatible version
This has been tested with 4.3 too.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 01:37:21 +0200] rev 3006
readme: prepare readme
The feature that only work with 4.3+ are flagged as such.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 01:27:40 +0200] rev 3005
compat-test: merge future 6.7.0 into 3.8 compat branch
(merging through 3.9 compat branch)
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 01:22:58 +0200] rev 3004
compat-test: merge future 6.7.0 into 3.9 compat branch
(merging through 4.0 compat branch)
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 01:18:39 +0200] rev 3003
compat-test: merge future 6.7.0 into 4.0 compat branch
(merging through 4.1 compat branch)
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 01:12:47 +0200] rev 3002
compat-test: merge future 6.7.0 into 4.1 compat branch
(mergeing through 4.2 compat branch)
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 01:07:22 +0200] rev 3001
compat-test: merge future 6.7.0 into 4.2 compat branch
Couple feature to disable and other various test impact.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 00:54:28 +0200] rev 3000
branching: merge future 6.7.0 in the stable branch
We are getting ready to release a new version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 27 Sep 2017 00:00:22 +0200] rev 2999
topic: fix topic message for mercurial 4.2 and below
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 26 Sep 2017 19:05:04 +0530] rev 2998
README: mention that --age also shows the user
While I was here, I fixed the a spelling mistake in previous commit.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 24 Sep 2017 11:30:14 +0200] rev 2997
topic: try to clarify the "branch" part in stack
The idea is to clarify the meaning of "behind" with using the "target" word.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 26 Sep 2017 13:01:21 +0200] rev 2996
readme: mention the message update
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 25 Sep 2017 03:30:56 +0530] rev 2995
topics: make sure user don't pass both the age option and a topic name
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 25 Sep 2017 03:29:45 +0530] rev 2994
topics: spell out topics completely in help
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 25 Sep 2017 03:23:06 +0530] rev 2993
topics: show the user who last touched the topic in --age
This patch adds support for showing the user who last touched the topic in the
age option to `hg topics`.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 25 Sep 2017 03:06:37 +0530] rev 2992
topics: initialize variable with default value instead of assigning later
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 25 Sep 2017 03:04:42 +0530] rev 2991
topics: improve the function signature by accepting arguments as **opts
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 26 Sep 2017 12:58:10 +0200] rev 2990
topic: merge with strip related fix
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 26 Sep 2017 12:56:03 +0200] rev 2989
topic: skip topic movement message during strip
During strip transaction the repository is not in a great state. It is simpler
to skip the computation entirely.
Aurélien Campéas [Tue, 26 Sep 2017 12:39:11 +0200] rev 2988
topics/ui: detect and signal when an empty changeset becomes non-empty
Aurélien Campéas [Fri, 22 Sep 2017 18:01:29 +0200] rev 2987
topics/transaction: return immediately if we are in the middle of a transaction
Aurélien Campéas [Fri, 22 Sep 2017 16:41:37 +0200] rev 2986
topics/ui: signal when an operation entails voiding a topic
Typical situations may include:
* publish
* push (to publishing server)
* pull
* fold
Aurélien Campéas [Tue, 26 Sep 2017 12:29:15 +0200] rev 2985
topics/ui: signal when the topics command creates a new (empty) topic
Aurélien Campéas [Tue, 26 Sep 2017 12:27:43 +0200] rev 2984
topics: signal to the end user when a topic has been forgotten
Situation is:
* we're updating outside an empty topic.
* we've cleared topics
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 22 Sep 2017 13:46:41 +0200] rev 2983
topic: add a --topic option to "outgoing" command
By symmetry with "push" in the previous changeset.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 22 Sep 2017 13:43:38 +0200] rev 2982
topic: add a --topic option to "push" command
This is symmetrical with --bookmark or --branch; it selects changesets in
specified topic as revisions to push.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 22 Sep 2017 12:48:57 +0200] rev 2981
test-compat: adapt to core change in b90bd9a98c8b
Blackbox just got a little more chatty.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Sep 2017 19:34:37 +0200] rev 2980
readme: update about obslog update and documentation refresh
Aurélien Campéas [Thu, 21 Sep 2017 17:08:00 +0200] rev 2979
topic/tuto: be more precise in the top introduction about the publishing server
Indeed there is a chapter with a non-publishing one.
Aurélien Campéas [Thu, 21 Sep 2017 17:06:16 +0200] rev 2978
topics/tuto: prefer rebase over merge and remove the weird merge attempt
Aurélien Campéas [Thu, 21 Sep 2017 17:04:24 +0200] rev 2977
topics/tuto: typo fix and s/multiple/two
Aurélien Campéas [Thu, 21 Sep 2017 17:00:04 +0200] rev 2976
topics/tuto: be more complete over the de-orphaning action within a topic
Aurélien Campéas [Thu, 21 Sep 2017 16:52:05 +0200] rev 2975
topics/tuto: try to be more precise on why `hg log` output is hairy
Aurélien Campéas [Thu, 21 Sep 2017 16:42:45 +0200] rev 2974
topics/tuto: attempt to have a slightly more clear wording
Aurélien Campéas [Thu, 21 Sep 2017 16:41:42 +0200] rev 2973
topics/tuto: try to be more clear when explaining previous/next
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Sep 2017 18:35:22 +0200] rev 2972
test: fix the enforce-topic configuration
There have been an error while updating this patch.
Aurélien Campéas [Thu, 21 Sep 2017 16:25:58 +0200] rev 2971
topics/tuto: clarification on the scope of the tutorial
Also we try to remain the reader that push -> publish.
Aurélien Campéas [Thu, 21 Sep 2017 15:27:20 +0200] rev 2970
topics/tuto: slightly more verbose explanation of what we are seeing
Aurélien Campéas [Thu, 21 Sep 2017 15:15:24 +0200] rev 2969
topics/tuto: spell out `hg topics` entirely
Aurélien Campéas [Thu, 21 Sep 2017 15:09:14 +0200] rev 2968
topics/tuto: activate the `enforce-topic` option
This really help users to stick within topics.
Aurélien Campéas [Thu, 21 Sep 2017 14:05:27 +0200] rev 2967
topics/tuto: highlight the behaviour on publish + update
And the fact that empty topics vanish if we update out of them.
Aurélien Campéas [Thu, 21 Sep 2017 13:04:19 +0200] rev 2966
topics/tuto: fix title underline type introduced earlier
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Sep 2017 17:44:58 +0200] rev 2965
doc: update graph with latest version of doc-graph
Philippe Pepiot <phil@philpep.org> [Thu, 21 Sep 2017 17:13:46 +0200] rev 2964
flake8 docs/conf.py
Philippe Pepiot <phil@philpep.org> [Thu, 21 Sep 2017 17:13:09 +0200] rev 2963
doc: disable generating command documentation when mercurial is not up-to-date
Philippe Pepiot <phil@philpep.org> [Fri, 01 Sep 2017 08:32:17 +0200] rev 2962
doc: add documentation for evolve commands
By using a sphinx directive that call `hg help`.
Philippe Pepiot <phil@philpep.org> [Thu, 21 Sep 2017 16:11:59 +0200] rev 2961
doc: clarify undocumented features
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Sep 2017 16:55:17 +0200] rev 2960
test2rst: ignore the #if/#endif line in the output
They are not useful for the rest.
Boris Feld <boris.feld@octobus.net> [Thu, 21 Sep 2017 10:45:27 +0200] rev 2959
doc: integrate graphviz graphs in tutorials
Use the mercurial-docgraph extension (https://pypi.python.org/pypi/hg-
docgraph/) in tutorials in order to have some dot graphs in the tutorials .t
files.
Then generate the doc as usual, the sphinx-graphviz extension (http://www
.sphinx-doc.org/en/stable/ext/graphviz.html) has been added and it should
handle the generation of the graphs. Please be aware that you need the dot
binary installed in your system. Please refer to the extension documentation
for more configuration.
Boris Feld <boris.feld@octobus.net> [Thu, 21 Sep 2017 10:45:06 +0200] rev 2958
doc: add a special flag for content to ignore in the rst
The testfile to rest document convertion has a new way to ignore some commands.
Alain Leufroy [Fri, 08 Sep 2017 12:10:21 +0200] rev 2957
obslog: simplify formatter keys
The formatter field keys are all prefixed with
`debugobshistory.'. This is annoyingly useless as they are already in
the `debughistory` topic.
This patch simplify these keys. For examle, on this repository `hg obslog -Tdebug -r 31cbace4c0f1` :
```
debugobshistory = [
{
'node':'31cbace4c0f1',
'shortdescription':'topics: make sure we have some restrictions on topic names',
'rev':2904,
'markers':[
]
},
{
'node':'d439a6087434',
'markers':[
{
'date':(1504176329.83902,
-7200 ),
'verb':'rewritten',
'succnodes':[
'31cbace4c0f1'
],
'effect':[
'parent'
],
'user':'Pierre-Yves David <pierre-yves.david@octobus.net>'
}
]
},
{
'node':'1e1f651704d4',
'markers':[
{
'date':(1504175088.811924,
-7200 ),
'verb':'rewritten',
'succnodes':[
'd439a6087434'
],
'effect':[
'parent'
],
'user':'Pierre-Yves David <pierre-yves.david@octobus.net>'
}
]
},
{
'node':'eb6495cf6cb1',
'markers':[
{
'date':(1504015275.001643,
-19800 ),
'verb':'rewritten',
'succnodes':[
'1e1f651704d4'
],
'effect':[
'parent',
'content'
],
'user':'Pulkit Goyal <7895pulkit@gmail.com>'
}
]
},
{
'node':'761e446e0112',
'markers':[
{
'date':(1504015201.780276,
-19800 ),
'verb':'rewritten',
'succnodes':[
'eb6495cf6cb1'
],
'effect':[
'content'
],
'user':'Pulkit Goyal <7895pulkit@gmail.com>'
}
]
},
{
'node':'531a626950bd',
'markers':[
{
'date':(1504015017.897054,
-19800 ),
'verb':'rewritten',
'succnodes':[
'761e446e0112'
],
'effect':[
'meta',
'parent',
'content'
],
'user':'Pulkit Goyal <7895pulkit@gmail.com>'
}
]
},
{
'node':'c2f9ba7329ea',
'markers':[
{
'date':(1504014136.876537,
-19800 ),
'verb':'rewritten',
'succnodes':[
'531a626950bd'
],
'effect':[
'meta'
],
'user':'Pulkit Goyal <7895pulkit@gmail.com>'
}
]
},
]
```
We now able to ask `hg obslog -r 78debdfb3e4d -T '{label("log.summary", shortdescription)}\n{if(markers, markers % " {date|age} {user|person}\n")}'`
```
doc: simplify the reference to in-core features
9 days ago Pierre-Yves David
9 days ago Pierre-Yves David
9 days ago Pierre-Yves David
9 days ago Pierre-Yves David
9 days ago Philippe Pepiot
9 days ago Philippe Pepiot
```
Alain Leufroy [Fri, 08 Sep 2017 12:03:23 +0200] rev 2956
obslog: fix `--template` with `--graph` option
The `template` option was not propagated.
Alain Leufroy [Fri, 08 Sep 2017 12:24:22 +0200] rev 2955
obslog: uniformize `_debugobshistoryrevs` and `_debugobshistorygraph` arguments
`_debugobshistoryrevs` and `_debugobshistorygraph` perform quite the
same action, the latter simply add graph support. Consequently, it
looks better for them to have the same argument list.
Alain Leufroy [Sun, 17 Sep 2017 12:45:28 +0200] rev 2954
obslog: fix --patch with --no-graph options
The repo given to _debughistorydisplaymarker which computes the diff
was filtered when graph mode is disabled.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Sep 2017 15:18:28 +0200] rev 2953
commands: upgrade pdiff and pstatus to full commands
Doing so make them appears in the documentation, improving their
discoverability.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Sep 2017 14:50:55 +0200] rev 2952
gup/gdown: properly mark these commands as deprecated
They are no longer displayed in the documentation.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Sep 2017 10:39:49 +0200] rev 2951
Backed out changeset 1b4c92621e23
This got published by mistake.
Boris Feld <boris.feld@octobus.net> [Tue, 29 Aug 2017 16:42:40 +0200] rev 2950
doc: integrate graphviz graphs in tutorials
Use the mercurial-graphviz extension
(https://bitbucket.org/octobus/mercurial_graphviz) in tutorials in order to
have some dot graphs in the tutorials .t files.
In order to run the tests, export the GRAPHVIZ_EXTENSION variable which points
to your copy of the extension. Please be aware that pygraphviz should be
installed in your environment.
That should be sufficient for generating dot graphs in text format.
Then generate the doc as usual, the sphinx-graphviz extension (http://www
.sphinx-doc.org/en/stable/ext/graphviz.html) has been added and it should
handle the generation of the graphs. Please be aware that you need the dot
binary installed in your system. Please refer to the extension documentation
for more configuration.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 19 Sep 2017 12:52:22 +0200] rev 2949
amend: lift the --interactive constraint on `--extract`
The uncommit logic now supports interactive selection.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 18 Sep 2017 04:31:59 +0200] rev 2948
readme: mention the topic output cleanup
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 18 Sep 2017 04:30:57 +0200] rev 2947
readme: mention the new --interactive mode for uncommit
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 18 Sep 2017 04:28:12 +0200] rev 2946
uncommit: minor comment cleanup in the test
Fix some of the sectionning and fix on comments.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 18 Sep 2017 04:20:36 +0200] rev 2945
uncommit: small cleanup of the interactive test setup
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 11 Sep 2017 18:12:06 +0200] rev 2944
tests: add tests for interactively uncommitting by mentioning files
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 11 Sep 2017 17:41:53 +0200] rev 2943
uncommit: fix the dirstate handling in `uncommit -i`
This patch fixes the dirstate handling after `hg uncommit --interactive`. This
patch is bit verbose about the logic and efforts are not put to plug the logic
into existing logic as it's easier to understand like this. Plugging this into
non-interactive logic deserves a separate patch.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Sep 2017 14:35:00 +0530] rev 2942
uncommit: pre-indent a block in if-True
The block will be moved in if-else in next patch.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 14 Sep 2017 17:23:24 +0530] rev 2941
uncommit: add an interactive option to uncommit
This patchs adds an interactive flag to uncommit command which lets you choose
hunks interactively. The implementation is as follows:
1) prompt user to select hunks to uncommit interactively
2) make a temporary commit of the hunks user selected
3) calculate the diff of temporary commit and changeset to be uncommitted
4) commit that diff which results in the changeset which should be there after
uncommiting
5) create obsmarkers as required, phases and bookmarks handling
6) reroute the working directory
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 04 Sep 2017 15:54:39 +0200] rev 2940
uncommit: pre-indent a block in if-True for the next patch
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 17 Sep 2017 19:59:25 +0200] rev 2939
topic: provide more information when behind count cannot be computed
The behind count has been confusing for various user and the associated error
message is even worth. We try to clarify it to see if that helps.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 15 Sep 2017 23:25:38 +0530] rev 2938
topic: show the t0 even if topic is not yet touched
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 15 Sep 2017 23:13:05 +0530] rev 2937
topics: improve the description if topic is not touched
Instead of an empty stack in `hg stack` when topic does not contain any
changeset, we show `not yet touched`.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 15 Sep 2017 22:48:55 +0530] rev 2936
topics: show working directory branch when topic is empty
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 01 Sep 2017 15:09:59 +0530] rev 2935
topics: add tests for cases when a topic is empty
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 15 Sep 2017 16:28:59 +0200] rev 2934
readme: mention compatibility with future 4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 15 Sep 2017 17:20:42 +0200] rev 2933
topic: update the message used with --age for empty topic
This clarify things when a topic got emptied by publishing.
Ryan McElroy <rmcelroy@fb.com> [Wed, 30 Aug 2017 17:32:32 +0200] rev 2932
sharing: edit pass
Ryan McElroy <rmcelroy@fb.com> [Wed, 30 Aug 2017 17:32:32 +0200] rev 2931
user-guide: edit pass
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 13 Sep 2017 21:41:57 +0200] rev 2930
topic: stabilise the output of --age when date ties
We just needed to introduce sort to stabilize the output order.
Boris Feld <boris.feld@octobus.net> [Fri, 15 Sep 2017 15:48:18 +0200] rev 2929
tests: update after removing of redundant amend commit
Following e8a7c1a0565a, temporary amend commits has been removed impacting all
revision numbers in tests including amend operations.
Update tests case to use description or hashes when possible and update
revisions number when not.
Boris Feld <boris.feld@octobus.net> [Wed, 13 Sep 2017 15:13:51 +0200] rev 2928
topic: setup 'topic' value for working ctx
The way amend work in core change in e8a7c1a0565a. The intermediate commit
disappear and we can no longer rely on it to carry the topic value to amend. To
fix this, we ensure the current topic value can be retrieved through the
`workingctx.extra()` value. Since there is no way to carry a "missing" key
information in a way that survives and "dict.update" call. We also has to
introduce hacking behavior about a special empty value for topic.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 14 Sep 2017 20:33:03 +0200] rev 2927
tests: abstract version number for test-topic-stack.t
Using explicite version number always bring trouble, this is why we have unique
description that can select changesets.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 07 Aug 2017 23:22:41 +0900] rev 2926
evolve: use registrar.templatekeyword to register template keyword functions
Now, using registrar.templatekeyword of Mercurial directly in evolve
extension should be safe enough. because it has been available since
Mercurial 3.8, and minimum Mercurial version for evolve extension is
3.8, too.
BTW, this also fixes an issue of "hg help templates" output that
template keywords "precursors" and "successors" are not displayed as
same as others, because they do not have ":KEYWORD:" prefix in their
docstring.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sun, 10 Sep 2017 20:06:52 +0900] rev 2925
evolve: use registrar.revsetpredicate to register revset predicate functions
Now, using registrar.revsetpredicate of Mercurial directly in evolve
extension should be safe enough. because it has been available since
Mercurial 3.8, and minimum Mercurial version for evolve extension is
3.8, too.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 07 Aug 2017 23:17:13 +0900] rev 2924
topic: use registrar.revsetpredicate to register revset predicate functions
Now, using registrar.revsetpredicate of Mercurial directly in topic
extension should be safe enough. because it has been available since
Mercurial 3.8, and minimum Mercurial version for topic extension is
4.0.
This patch also removes modsetup() in topic/revset.py, because it is
useless.
BTW, this patch fixes an issue of "hg help revsets" output that custom
revset predicates are not displayed as same as others, because they
are not "inline literal" in reST syntax (``NAME``).
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Mon, 07 Aug 2017 23:24:57 +0900] rev 2923
doc: make paragraphs before example code end with "::" for reST syntax
This prevents lines in an example code from being treated as a part of
normal paragraph. For issue example, lines are folded into one
paragraph.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sun, 10 Sep 2017 22:41:54 +0900] rev 2922
topic: centralize compatibility logic between hg versions into compat module
This patch can delay loading obsutil and obsolete modules until they
are actually used at "hg topics" or so, if demandimport of Mercurial
is enabled.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 11 Sep 2017 17:24:33 +0200] rev 2921
readme: mention the improvement to stack in the readme
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 07 Sep 2017 19:18:05 +0200] rev 2920
test: issue a clarifying graph print in tests/test-stack-branch.t
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 09 Sep 2017 22:32:50 +0530] rev 2919
stack: properly order stack when gaps existing inside it
We transitively search for the next "stack" ancestors, of changeset in the stack
not based on other revision of the stack. This should help having a consistent
display when topic are interleaved.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 07 Sep 2017 19:43:07 +0200] rev 2918
stack: display both parent with displaying merge
This will help understanding merge in the stack. More test involving merge are
adding in the next changeset.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 09 Sep 2017 22:32:44 +0530] rev 2917
tests: add tests for showing stack when merge is involved
This patch adds tests of showing stack when merges are involved. This will help
us in changing the behaviour and realising that in later patches.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 04 Sep 2017 12:41:30 +0200] rev 2916
stack: move data computation on the object
We gather multiple data about the stack on the object. Let us move this on the
object and keep it cached there.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 04 Sep 2017 12:23:03 +0200] rev 2915
stack: replace 'getstack' with direct call to 'stack'
The dedicated function do not add any value. We can update all the callers.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 04 Sep 2017 12:19:49 +0200] rev 2914
stack: introduce a rich stack object
The logic around stack object become more and more complex. We great and object
to gather and abstract it.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Sep 2017 16:45:57 +0200] rev 2913
tests: add tests for `hg stack` showing surprising behavior with gaps
The test will help us to analyse in next commit if the things are fixed or not.
FUJIWARA Katsunori <foozy@lares.dti.ne.jp> [Sun, 10 Sep 2017 22:22:06 +0900] rev 2912
topic: check availability of obsutil.getmarkers() for portability
Before this patch, topic extension causes unintentional failure with
Mercurial earlier than 4.3, because obsutil.getmarkers() has been
available since Mercurial 4.3 (tests for topic on mercurial-4.*
branches fail, too).
This breaks "minimumhgversion = '4.0'" declaration of topic extension.
This patch fixes this issue in a straightforward way for simplicity on
stable branch.
I'm planning to centralize such portability logic in topic extension
into topic/compat.py or so on default branch for efficiency at
runtime, like as evolve/compat.py.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 07 Sep 2017 16:45:53 +0200] rev 2911
tests: add more explicit test about empty topic from publishing
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 19:29:04 +0200] rev 2910
convertbookmark: advertise the new command in the readme
The command is in a good enough shape now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 17:15:55 +0200] rev 2909
convertbookmark: properly convert stacked bookmarks
We ignores pure descendant when looking for revision to convert. This adds
support for cases were a linear stack contains multiple bookmark (or
un-bookmarked descendants exists).
In this case, some changeset are left orphan, but we'll consider the issue as
minor for now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 18:46:10 +0200] rev 2908
convertbookmark: perform all actions at the end
This will make the whole operation more deterministic and robust.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 18:33:08 +0200] rev 2907
converbookmark: split target computation from actual update
This will allow for further refactoring helping consistency.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 17:09:17 +0200] rev 2906
convertbookmark: extract the revset into a module level constant
This will make it easier to read and modify the query.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 17:04:21 +0200] rev 2905
convertbookmark: properly exclude public changeset
Public changeset are immutable and cannot have a topic anyway.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 16:51:49 +0200] rev 2904
test: add a new root changeset to all debugconvertbookmark test case
We'll make this root changeset public to check the debugconvertbookmark logic in
that regards. It is added in its own changeset since it massively impact all
output.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 12:02:27 +0200] rev 2903
tests: import section in 'test-topic-debugcb.t'
We now have two levels of titles to clarify some aspect of the tests.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 16:22:49 +0200] rev 2902
test: avoid using debugdrawdag in 'test-topic-debugcb.t'
The 'debugdrawdag' utility adds local tags that prevent hidden changeset to get
hidden. We will do without that extension for now.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 29 Aug 2017 18:13:33 +0530] rev 2901
tests: add more tests for debugconvertbookmark
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 14 Aug 2017 14:36:11 +0530] rev 2900
convertbookmark: add logic to skip revisions with multiple bookmarks
When a user tries to converts a bookmark to topic which is on a changeset with
more bookmarks we skip that.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 01 Sep 2017 18:02:50 +0200] rev 2899
topics: add a new debugconvertbookmark command to convert bookmarks to topics
This new command, aliased to debugcb converts bookmarks to topics. This command
either accept name of a bookmark using flag '-b' or '--all'.
If a bookmark is passed using '-b', the whole stack defined by that bookmark is
converted to topics. If '--all' is passed, the above thing is repeated for every
bookmark in the repository.
If the revset which we are using unable to decides revisions of the stack and
return an expty set, in that cases we are not deleting the bookmark as we are
not writing any topics of the same name as that of bookmark. Also currently if a
changeset has two bookmarks, than there is buggy behaviour. So these are known
lackings in the current implementation which will be fixed in upcoming patches.
This also adds tests for the same.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 17:53:14 +0200] rev 2898
topic: support --rev argument and properly process then as user input
Revisions inputed by the users should be processed using `scmutil.revrange`.
This will take alias into account and allow extensions to monitor the user
inputs.
As a side effect, the '_changetopics' function takes revisions as argument.
make the API clearer.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 01 Sep 2017 17:37:47 +0200] rev 2897
topic: move a status message in the right scope
The finally get runs on failure so we should not advertise rewrite topic in the
case. In addition the 'rewrote' variable can be undefined in the finally.
Boris Feld <boris.feld@octobus.net> [Wed, 09 Aug 2017 11:32:19 +0200] rev 2896
obsfate: use effect flag information for computing a better verb
Philippe Pepiot <phil@philpep.org> [Tue, 29 Aug 2017 17:30:07 +0200] rev 2895
compat: make it more clear that evolve need Mercurial >= minversion
The message is more clear when mercurial isn't installed at all.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 30 Aug 2017 18:35:04 +0200] rev 2894
doc: record all the missings and strange bit we know
We know the doc is not as fresh as it could be. We make sure the reader is aware
too.
Boris Feld <boris.feld@octobus.net> [Thu, 31 Aug 2017 17:00:09 +0200] rev 2893
directaccess: fix with tree without order
1b28525e6698 removes order from tree, changing the indexes in gethashsymbols.
Fix that
Boris Feld <boris.feld@octobus.net> [Fri, 01 Sep 2017 11:08:22 +0200] rev 2892
compat: adapt to test output changes
different access pattern in 4.4 means different results.
Make evolve works with mercurial core 72b5f4d53c58
Boris Feld <boris.feld@octobus.net> [Fri, 01 Sep 2017 11:07:28 +0200] rev 2891
compat: adapt to rebase change in coming 4.4
Make evolve works with mercurial core 72b5f4d53c58
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 31 Aug 2017 13:22:40 +0200] rev 2890
topics: import lock as lockmods
We'll need a 'lock' variable in the next changeset. we move the module out of
the way ahead of time for clarity.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 29 Aug 2017 19:12:00 +0530] rev 2889
topics: make sure we have some restrictions on topic names
This patch makes sure we don't allow topic names with just whitespaces, and
other checks which we do for a bookmark.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 29 Aug 2017 19:03:59 +0530] rev 2888
topic: add test showing no restrictions on topic names
Currently we don't have any restrictions on topic names and each of the topic
name works. We want them to not work as some of them are used internally and
only integers can be rev numbers too.
Ryan McElroy <rmcelroy@fb.com> [Wed, 30 Aug 2017 17:32:32 +0200] rev 2887
index: edit pass by native english speaker
Aurélien Campéas [Wed, 30 Aug 2017 16:54:26 +0200] rev 2886
topic: reword and simplify explanation of "behind"
Aurélien Campéas [Wed, 30 Aug 2017 15:57:04 +0200] rev 2885
topic: tutorial grammar fixes
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 30 Aug 2017 11:36:47 +0200] rev 2884
doc-front-page: link to the changeset evolution section in the document
The section is unlikely to be perfect, but at least it exists.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 30 Aug 2017 11:26:00 +0200] rev 2883
doc-front-page: use a clearer statement about the experimental status
This text comes form the Mercurial wiki.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 30 Aug 2017 11:25:51 +0200] rev 2882
doc-front-pagE: add a paragraph about "why the extension"
Let us clarify why there is an extension in the first place.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 30 Aug 2017 11:25:27 +0200] rev 2881
doc-front-page: expand the paragraph about changeset evolution
We clarify the part of the explanation about the changeset evolution concept.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 30 Aug 2017 11:24:38 +0200] rev 2880
doc-front-page: rename the "next step" section
This are pointer to relevant section in the doc. It is a bit double usage with
the table of content. We at least clarify the title.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 30 Aug 2017 10:30:48 +0200] rev 2879
doc-front-page: mention that "Changeset Evolution" is a specific concept
It will get it own paragraph soon.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 30 Aug 2017 00:32:56 +0200] rev 2878
doc-front-page: include the index in the TOC
This will help important content to stand forward.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 30 Aug 2017 00:35:44 +0200] rev 2877
doc-front-page: add a title to the part about the extension
We'll rework this section more in depth, but I would like it to have a title
first to have it show up in the table of content.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 29 Aug 2017 17:25:01 +0200] rev 2876
doc-front-page: add a feature summary at the beginning of the page
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 29 Aug 2017 17:11:18 +0200] rev 2875
doc-front-page: mention the mailing list in the documentation
It is an important tool to keep people up to date.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 29 Aug 2017 16:58:22 +0200] rev 2874
doc-front-page: move installation instruction earliero
This is important for user.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 29 Aug 2017 16:50:05 +0200] rev 2873
doc-front-page: move introduction before the table of content
This should make a friendlier landing.
Philippe Pepiot <phil@philpep.org> [Tue, 29 Aug 2017 16:15:02 +0200] rev 2872
doc: simplify the reference to in-core features
This should do the whole thing lighter.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 29 Aug 2017 16:14:28 +0200] rev 2871
doc: be less dramatic about changeset immutability
Quoting Phillipe: "This is not a Tolkien Novel".
Philippe Pepiot <phil@philpep.org> [Tue, 29 Aug 2017 16:14:15 +0200] rev 2870
doc: clarify the introduction sentence
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 28 Aug 2017 17:16:16 +0200] rev 2869
topics: allow use a --current when setting a topic
This patch allow to use the current flag which can be used by user set existing
revs to the current topic.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 28 Aug 2017 17:35:44 +0200] rev 2868
topic: make --clear + topicname invalid
The two flags are mutually exclusive.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 28 Aug 2017 17:15:08 +0200] rev 2867
topics: add a current flag to display current topic
This patch adds a current flag which can be used by user to display the current
topic.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 28 Aug 2017 17:10:41 +0200] rev 2866
topics: add a missing trailing comma on list of flag
This will make the next changeset easier to read.
Philippe Pepiot <phil@philpep.org> [Tue, 29 Aug 2017 14:19:31 +0200] rev 2865
doc: let mercurial find where evolve is installed
Philippe Pepiot <phil@philpep.org> [Tue, 29 Aug 2017 14:27:08 +0200] rev 2864
doc: use pip to install evolve
Philippe Pepiot <phil@philpep.org> [Tue, 29 Aug 2017 12:20:30 +0200] rev 2863
doc: reword "target repository" to "remote repository"
Philippe Pepiot <phil@philpep.org> [Tue, 29 Aug 2017 12:18:42 +0200] rev 2862
doc: typo fixes