py3: use bytes for revset predicate registrations

py3: use bytes for wireprotocol command registration

py3: use byte strings for @command registrations

py3: switch from iteritems() to items()

py3: make metadata values be byte strings as Mercurial expects

tests: update output for shorted prompts from Mercurial This makes tests pass again after Mercurial commits f802a75da585 (patch: use a short, fixed-size message for last line of prompt (issue6158), 2019-06-20). CORE-TEST-OUTPUT-UPDATE: f802a75da585

tests: update output for shorted prompts from Mercurial This makes tests pass again after Mercurial commits 4764e8436b2a (filemerge: make last line of prompts <40 english chars (issue6158), 2019-06-20) CORE-TEST-OUTPUT-UPDATE: 4764e8436b2a

rewriteutil: allow rewriting merge commits (issue4561) This patch simply allows rewriteutil.rewrite() to work with commits with multiple parents (i.e. merges). That function is used in such commands as fold, metaedit, touch, rewind. The issue 4561 is marked as easy, the limitation is called unnecessary, no tests fail after this change. What can go wrong.

tests: show what happens when trying to hg touch a merge commit

evolve: further clarify that update is performed only when requested Text further modified by Pierre-Yves David and Anton Shestakov.

touch: let's not use util.acceptintervention() as it's not required

branching: merge with stable

evolve: use right value for branch name when finding branch heads subbranch already formatted as "branchname:topicname", again appending it with ":topicname" doesn't not make sense. It's a little bit surprising that no tests fails though.

evolve: fix confusion in branch heads checking logic when topic in play To provide some context, when topics are in play the branchmap cache we store contains the branch info of a rev as "branch:topic" format IIUC. Assuming that is right, now in present code we don't actually cover this part that "when looking for branch heads where we also have active topic we should look for branch='branch_name:topic' instead". And we get wrong branch heads as a result. This patch make sure that we pass right candidate to find branch heads using branchmap.branchheads() by overriding the localrepo.branchheads() Changes in test file reflect the fixed behavior.

topic: add tests to demonstrate topic confuses the branchhead checking logic While topics are in play, we store the branchheads (which has a topic) in "branchname:topicname" format. After digging into it I found that even in the case when we should have branch heads for "bname:tname" we get heads for "bname". The tests output reflect the confusion in branch head checking logic. Next patch will be fixing the problem.

evolve: fix the inconsistent behaviour of prune (issue6137) Let's not update to any revision when working directory parent is not related to the revision being pruned. Changes in test file demonstrate the fixed behaviour.

prune: add tests to demonstrate issue6137 Here we can see that prune updates off to the parent revision even when the pruned revision wasn't related with the working directory parent. A follow-up patch will fix this.

compat: fix `setupevolveunfinished` for upstream

prune: update to the successor of wdir also with --pair/--biject (issue6142) When prune is used with --pair flag, we can also update to the successor of working directory parent. No need to check len(sucs) or len(precs) here because there's a check for that earlier in the code (it's a requirement of biject). The tests are now demonstrate the correct behavior: when rev 14 was pruned with 12 as its successor, the bookmark that was on 14 was moved to 12. That bookmark was also activated (even before this patch).

tests: demonstrate prune --pair not moving bookmark correctly After `mkcommit n2` line the bookmark is on the correct changeset, but when we prune --pair the two newly created changesets (revs 13 and 14), the bookmark gets moved to their ancestor (rev 0). Instead, it should've moved to the last of their successors (rev 12).

oops: backed out changeset 7ac40b4ea24c Anton requested some changes on it.

compat: fix `setupevolveunfinished` for upstream

evolve: fix the code flow pattern of solving obswdir par and troubled revs Now we will go to _handlenotrouble() (which prints messages about no revs to solve) only when there is no troubled revs and working dir parent is not obsolete. This change also saves us from an issue which was about looking into the revset (smartset contains troubled revs to solve) when a rev from the revset gets hidden. This happens in the case when our wdir parent is obsolete. After resolving obswdir parent we were looking into the revset to check if there is any troubled revs to solve but we should have performed this check before performing the obswdir resolution. Changes in test file reflect this fixed behaviour.

evolve: refactor for consistent behavior of evolve when wdp is obsolete This patch make sure that when working directory parent is obsolete `hg evolve` and `hg evolve --all` don't behave differently.

evolve: backout 3027005c42c3 to reintroduce a bug for right fix This patch backout 3027005c42c3 as it was accepted by mistake while it was being "in-discussion" state.

pick: register pickstate as an unfinished state This way pickstate file will indicate that unfinished pick command needs to be dealt with (--continue or --abort) before modifying the repo. Otherwise it would be e.g. possible to commit during an interrupted pick and that's not expected.

pick: rename variable for unfinishedstates

pick: actually delete pickstate if --abort is given Makes pick to be, uh, actually aborted.

evolve: orphans that evolve into nothing don't need successors (issue5967) When continuing to solve an orphan that created no changes (i.e. clean wdir), _completeorphan() used to create an obsmarker that said that the result of that orphan evolution is the currently checked out changeset. That's not a correct obsmarker, because all of the orphan's changes were dropped and so it had no effect on the currently checked out changeset. This is an issue that has only existed when --continu'ing evolve, that's why the fix touches _completeorphan(), but not _solveunstable(). This fix is adapted from a similar "if node is None" block in _finalizerelocate().

tests: demonstrate obsmarker creation after discarding conflicting changes Continued evolve creates an incorrect obsmarker that says 2 is a successor of 1. It's incorrect because 1 was dropped as it created no changes to commit (after conflict resolution that discarded its changes). If evolve does the same thing in one go (e.g. just by using --tool :local and without subsequent need to continue) the obsmarker is correct.

pick: remove transaction on the whole command (issue6037) At its core, pick is a pretty straightforward and well-behaving command, it uses functions already in core hg, it checks that wdir is clean and that changeset to pick is not public, it checks if there happen to be merge conflicts and can be --continue'd later, etc. It is very similar to graft in core (it also uses mergemod.graft function), but it obsoletes the original changeset. However, graft does not experience this incorrect behavior from issue 6037. What happens in the test case for this issue when we pick a revision that touches both "a" and "b": mergemod.graft() takes the original changeset and tries to apply it to the wdir, which results in "b" being marked as newly added and ready to be committed, "a" updated with the new content and being marked as modified, but "a" also has conflicts. Pick correctly notices this and saves its state before asking for user intervention. So far so good. However, when the command raises InterventionRequired to print a user-facing message and exit while being wrapped in repo.transaction() context manager, the latter partially undoes what mergemod.graft() did: it unmarks "b" as added. And when user continues pick, "b" is therefore not tracked and is not included in the resulting commit. The transaction is not useful here, because it doesn't touch wdir (it's still dirty), it doesn't remove pickstate (and other commands will refuse to work until pick --abort or --continue), it just makes "b" untracked. The solution is to use repo.transaction() only to wrap code that writes data to hg store in the final stages of the command after all checks have passed and is not expected to fail on trivial cases like merge conflicts. For example, committing the picked changeset. But since pick uses repo.commit() for that, and because that function already uses a transaction, wrapping it in another transaction doesn't make sense.

tests: demonstrate hg pick forgetting files after conflicts This test currently passes to show that pick is behaving incorrectly.

packaging: follow hg's supported python version (>= 2.7) "Mercurial 4.3 and newer require Python 2.7." (From https://www.mercurial-scm.org/wiki/SupportedPythonVersions) Also add X- prefix, because that's the correct form, apparently. This line can also be removed in future, since "When Debian supported multiple Python versions, X-Python-Version was used, but it is obsolete now as no supported Debian release supports anything other than python2.7." (From https://wiki.debian.org/Python/LibraryStyleGuide) That page also mentions "X-Python3-Version".

packaging: require hg 4.5 also for usage, not just for building

packaging: require mercurial >= 4.5 Otherwise building the doc package fails with: (third party extension evolve requires version 4.5 or newer of Mercurial; disabling) Exception occurred: File "/usr/lib/python2.7/dist-packages/mercurial/help.py", line 624, in help_ raise error.Abort(msg, hint=hint) Abort: no such help topic: evolve

evolve: clarify why returning by adding inline doc

evolve: move a code block to have right value in has_some_val Because of this we were having wrong value of has_some_val and had some buggy behavior which is being fixed by this patch. Fixed behavior is reflected by the changes in test file.

topic: add tests which demonstrate topicset failure of FilteredRepoLookupError When topics are used, it fails to find hidden revs mentioned in a revset as we are not using unfiltered view of repo. Next patch will fix it.

pick: reduce configoverride() scope Merge tool is only needed for merge.graft() (it's what graft in core hg does), so let's make the scope of the ui.configoverride() narrower.

evolve: correct action verb in a message

evolve: internationalize a message This exact message was already wrapped in _() in the same file, just not here.

evolvecmd: the proper way to deal with conflicts is to resolve them And it's worth making the suggestion an actual hint.

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge mercurial-4.8 into mercurial-4.7

test-compat: merge mercurial-4.9 into mercurial-4.8

test-compat: merge stable into mercurial-4.9

branching: merge with 9.0.0

branching: merge back with stable

packaging: mark as development versions This help to distinct official release from in progress work.

Added tag 9.0.0 for changeset 756db65030c6

packaging: prepare release 9.0.0

doc: clarify the status of configuration of the obshashrange protocol

changelog: add various missing bits

templatekw: keep compatibility with Mercurial 4.5 This is simple enough to do.

test: adjust output to stable branch We are about to make a release.

branching: merge with stable

templates: don't alias keywords directly Putting the same function twice in the registry results in duplicate doc strings and therefore confusing "hg help template" output.

stack: remove 'topic.' prefix from colors/labels Stack is related to topics, sure, but it is also good enough to be recognized on its own.