Add "documentation update" to the changelog.

docs: cover 'touch' command

docs: explain that obsolete is not hidden

docs: explain --hidden option Also move the discussion of revision numbers up, and splice the explanation of --hidden into it.

docs: tweak wording, punctuation for better readability

docs: flesh out unfinished bits in the intro page

docs: revive the explanation of divergent changesets in the sharing guide

docs (sharing): more scattered wording tweaks

docs: sharing guide: clarify end-game of "Example 2" - push to dev-repo, rather than pulling into it (consistent with how we work the multiple developer scenario later) - explicitly demonstrate that public changesets are immutable

docs: minor tweaks to sharing guide (suggested by timeless)

docs: add code review scenario to sharing guide The idea is to demonstrate a simpler multiple-developer situation that does not involve getting into trouble. The final scenario illustrates Alice and Bob getting into trouble with bumped and divergent changesets by amending each other's history. The required tests and text are all written, but will need to be heavily revised because of the inserted scenario.

docs: add a bit more hierarchy to the sharing guide

docs: update sharing guide based (mostly) on marmoute's review - don't claim certain scenarios are more/less common, just simple/advanced - mention code review as a multiple-developer scenario (not described in detail yet!) - suggest "hg config --edit --local" instead of "cat >> .hg/hgrc" - use -q less often (and show resulting output) - edit some section headers to be consistent with user guide (example numbers; "amend" instead of "amending") (These are just the small changes; big changes are yet to come.)

Added tag 5.1.3 for changeset c52c15100fb2

prepare version 5.1.3

graft: avoid potential deadlock We must acquire 'wlock' before 'lock'.

commit: avoid potential deadlock We must acquire 'wlock' before 'lock'.

update readme

pull: fix bundle2 part generation The new part generator (allowing partial pull) was unproperly installed.

simple4server: cleanup debug output The debug output got duplicated with the original code. And the cleanup forgot about simple4serve. (code duplicated yeah!)

merge with stable

update readme

discovery: stop being stupid about variable name Overwritten variable are overwritten... The test coverage makes a simple pass in the loop :(

merge with stable

inhibit: explicitly test for None It is always better to check for None explicitly.

#iforgottoamendagain

discovery: port the new hashing version to simple4server

discovery: introduce a obshash1 function using fm1 during hashing (issue4587) The 'fm0' serialisation translate float to text. This give different result between python2.6 and python2.7 (because python2.7 got smarter). The 'fm1' is all binary and expected to be stable so we introduce the ability to do the discovery using hash computed with 'fm1' serialisation. We use a new wireprotocol version (Partly because I'm too lazy to check how to add an argument to the existing one) and capabilities). Support in simple4server is will come in the next changeset.

tests: use 'wget' instead of 'curl' for Windows compatibility The whole test suite now runs without skips, and the only two failures are a bookmark cache issue in test-prune.t, and a local output vs remote output reordering when pushing to ssh. The latter anyway is a core problem.

setup: allow including inhibit in the build Adds the INCLUDE_INHIBIT environment variable to allow including the inhibit extension in the build.

inhibit: Add -D option to the bookmark command The -D option for bookmark is similar to the -B option for strip. It deletes the bookmark and prunes the changes underneath it that are not reachable.

inhibit: don't leave any obsolete commit visible after closing transaction We add a callback to wrap the transaction closure to identify commits that are obsolete and visible. We inhibit them to prevent the user to see instability in the UI.

evolve: apply prune update before creating obsolescence markers Prune used to compute the destination commit to update to after creating the obsolescence markers. This is a commit to prevent a bug that would occur with the changes in inhibit for transactions (next commit). Indeed, with that change in inhibit, when creating the obsolescence markers in prune, they would get inhibited right away and we wouldn't update to the first non obsolete parent but stay on the same node as its obsolescence would have been inhibited (bug).

test-inhibit: check graph after prune We want to ensure prune keep working even with inhibit.

test-inhibit: drop trailing white space

tests: make tests work on Mac OS wc -m adds spacing before the results, we trim them to make the test pass on Mac OS.

merge with stable

inhibit: ensure that no obsolete changesets are visible after a bookmark change When creating a bookmark, we could reveal obsolete changesets. We are inhibiting the obsolete changesets resulting from a bookmark change. There are two ways to record bookmark changes to disk and we wrap both.

inhibit: ensure no visible changesets are obsolete after an update When updating to a commit we want to inhibit any obsolete commit affecting the changeset we are updating to. In other words we don't want any visible commit to be obsolete.

inhibit: enable direct access from parsing the revset tree To enable direct access we: - detect explicit hexadical reference to node in the revset tree - add these hashes to the static blockers to make them and their parent visible for the command to run

Added tag 5.1.2 for changeset e886bc501796

preparing version 5.1.2

update 5.1.2 with latest bugfix

evolve: have a stable manifest content when solving bumped We cannot really use iteritems here.

evolve: change config option name I forgot to amend...

config: allow disabling commands Now that upstream Mercurial has multiple options for obsolete configuration, we can allow enabling and disabling of evolve commands.

inhibit: Add some inhibition clearing mechanism We do not want to keep inhibition marker around for ever. So we are removing the one applying on public changeset.

add a 'inhibit' extension This extension will be used to reduce the scope of evolve in order to make some of its features available to the mass earlier. See extension documentation for details.

tests: use 'wget' instead of 'curl' for Windows compatibility The whole test suite now runs without skips, and the only two failures are a bookmark cache issue in test-prune.t, and a local output vs remote output reordering when pushing to ssh. The latter anyway is a core problem.

tests: import killdaemons.py from Mercurial 1cfded2fa1a9 This contains updated functionality to kill the server process on Windows, which is needed to run the test-*server.t tests. This version requires the pids to be passed as an argument instead of via $DAEMON_PIDS.

prune: add --keep to not touch the working copy In order to more closely emulate strip, lets add --keep to leave the working copy untouched when we do our prune.

strip: add the option for wrapping the strip command Adds an experimental option for wrapping the existing strip command and replacing its functionality with prune. It currently doesn't handle the --keep case, but an upcoming patch will address that.

wrapcommand: fix wrapping extensions that aren't enabled The extension command wrapping would previously fail if the extension wasn't enabled. Let's just eat that silently.

wrapcommand: allow adding additional arguments to commands This allows eh.wrapcommand to specify additional parameters to be added to the commands being wrapped. This will be useful when wrapping strip in the future.

pushexperiment: remove use of obsolete._enabled pushexperiment.py was using obsolete._enabled but it didn't cause any tests to fail so I didn't see it. Let's go ahead and replace it with the new obsolete.isenabled() api.

oldobsolete: remove use of obsolete._enabled obsolete._enabled is deprecated. Switch to the newer obsolete.isenabled() logic.

server4simple: remove use of obsolete._enabled obsolete._enabled is deprecated, so let's replace it's uses.

config: remove uses of obsolete._enabled Upstream Mercurial will be removing obsolete._enabled soon, so switch all our uses of it to use the new obsolete.isenabled(repo, option) function.

config: enable all obsolete options Upstream Mercurial has moved away from obsolete._enabled as the obsolete flag to a series of options. This patch makes evolve enable all the options automatically if the user hasn't enabled any already. This preserves the existing evolve experience of not having to configure anything.

merge with stable

evolve: fix manifest usage to match upstream The manifest class upstream is no longer a dictionary, so switch to using an API it does support.

drophack: fix to match upstream repair.strip repair.strip upstream now assumes the input nodelist is a list, so update to match it. The upstream change only affects the name of the backup bundle, so this shouldn't affect any other functionality.

evolve: prevent a crash in httpclient_pushobsmarkers() when pushing I've been running into a crash when pushing from my hg repo in a Fedora 16 VM to Win7 running 'hg serve', even with extensions disabled on both sides: ../hg push -r . pc pushing to http://192.168.1.4:8000/ searching for changes no changes found pushing 2 obsolescence markers (263 bytes) ** unknown exception encountered, please report by visiting ... File "hg-evolve/hgext/evolve.py", line 2482, in _pushobsolete remote.evoext_pushobsmarkers_0(obsdata) File "hg-evolve/hgext/evolve.py", line 2522, in httpclient_pushobsmarkers ret, output = self._call('evoext_pushobsmarkers_0', data=obsfile) ValueError: too many values to unpack I'm not sure how this repo differs from the one in the test suite, so I'm not sure how to craft a test for this. The failure occurs even when there _are_ csets to push. There was no crash if no obsolete markers needed to be pushed. At any rate, this code was stolen from httppeer._callpush(), where it calls self._call(). The socket exception handling wasn't necessary to fix the crash, but the calling code might as well be duplicated in its entirety. A successful push with this patch looks like this. Note the final line is _not_ in the output of the http push in test-simple4server.t: ../hg push -r . pc pushing to http://192.168.1.4:8000/ searching for changes remote has heads on branch 'default' that are not known locally: 3af110194a0c 56000e3ae44d 57ac6e51d290 7da4355c21b8 and 8 others remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 0 changes to 1 files (+1 heads) pushing 4 obsolescence markers (525 bytes) remote: 2 obsolescence markers added

merge stable into default

Added tag 5.1.1 for changeset 9b8628e0a142

prepare release 5.1.1

update readme

evolve: use 3.2+ fullreposet to evaluate argument set (issue4515) getset() has no compatibility wrapper for old-style argument and we don't want to add more hacks in Mercurial core.

evolve: cache marker encoding to avoid performance degradation The main overhead in bug 4518 is caused by calculating relevant markers and encoding markers into the correct format. Calculating relevant markers takes (worst case) ~ 0.12 seconds. Encoding markers takes (worst case) ~ 0.06 seconds. Caching encoded markers takes care of the second part and speeds up cloning in bug 4518 by about 35%.

evolve: handle invalid obsmarkers in the `debugobsconvert` User can now recover from such situation, The error message is also changed to point the `debugobsconvert` commands.

fix release date in the readme

merge stable in default

Added tag 5.1.0 for changeset bfe9be352453

update readme and bump version to 5.1

merge default into table 3.3 is about to be released.

discovery: filter null from the discovery revset If there is nothing in common, common will be "null" and the revset will now returns "-1" crashing the discovery process. We filter out the null revision to prevent that.

tests: update to new core output Multiple output change need to be applied to the test suite.

evolve: explicitly disable bookmark on evolve (issue4432) We no longer leave the current bookmark active after an evolve, since it is no longer pointing to the working directory.

discovery: do not build sample if undecided is smaller than sample size This prevents crash with coming change in the mercurial discovery.

merge with stable

init: don't abort Mercurial on version mismatch Evolve causes Mercurial to exit if there is a version mismatch, even if no evolve command is invoked. This is a headache for people who have to work with multiple versions of Mercurial. Instead, raise an ImportError, which gives a warning but otherwise allows Mercurial to run non-evolve commands.

Added tag 5.0.2 for changeset dbd0733e5840

prepare release 5.0.2

test: adapt to core change in graft and rebase The ouput changed we have to adapt

merge with stable

doc: drop rebase extension activation The dependency have been dropped.

evolve: remove the dependency to the rebase extension We do not use any rebase internal anymore.

evolve: remove the use of `rebase.concludenode` Half of this function is now done in `merge.graft` and the over part is easy to redo manually. So we remove the usage of this function to remove the dependency of evolve on the rebase extension.

evolve: use `merge.graft` instead of `rebasenode` The core mechanism is properly factorised and have a more stable API. This is also a good step toward removing the dependency between evolve and the rebase extension. This also avoid a breakage with the future 3.3 where some of the rebase API changed.

readme: add a reference to the bugtracker in the contribute section Idea from Patrick Mezard

merge with stable

debian: update changelog to 5.0.1

test: adapt test to stable output Stable branch should pass test with mercurial stable branch.

Added tag 5.0.1 for changeset 0f3090785283

evolve: update in file version (I'll eventually -not- forget to do so)

Added tag 5.0.1 for changeset 51e1e962172c

readme: prepare for release 5.0.1

readme: update changelog

evolve: tell user which "base of divergent changeset" is not found

debugobsconvert: fix 6f08a8f6bb1d and add proper test The changeset adding deduplication (6f08a8f6bb1d) was super buggy and dropped all obsmarkers in the repo. We update the test to check this case and fix the deduplication.

merge with stable

debugobsconvert: fix a typo on "version"

debugobsconvert: also deduplicate markers in the process Various bug allowed identical or semantically identical marker to be added to the repository. So we also filter duplicates when converting.

evolve: fix capitalization in docstring for commands

test: ensure we echo prompt Tool running using the shipped 'run-tests.py' instead of the mercurial one would get different result otherwise.

debian: blacklist simple4server tests simple4server is not part of the package.

debian: blacklist test-drop drophack.py is not shipped.

debian: update control file to reflect dependency to mercurial 3.2

evolve: fix the version number The tag is 5.0.0 the content of the file was wrong.

help: fix typo in help for 'obsolete' option added to import command

test: add an explicit test for simple4server with bundle2 This makes it more likely to we catch issue with the iteration of these two.

Make next/prev only move bookmarks optionally

obsup: hack extension to make in-place upgrading of obsolete markers easy I tried upgrading my obsstore by doing a local clone as suggested by Pierre-Yves and Sean, but that caused me to end up with a ton of unstable changes that should have been marked dead. In fact, as far as I can tell, most of the performance win of that upgrade came from the fact that only about 46% (46672 of 102285) of my markers were brought over with the copy-and-pull method.

merge stable into default

evolve: fix selection of changeset to evolve from the middle of a stack (issue4434) The evolve algorithm picked a bad changesets to evolve (unstable changeset with no obsolete parent (but unstable parent). And then get confused assuming that is the first parent was not obsolete, the second should be. This changeset fixed the issue by preventing selection of direct descendant of [.] when evolving.

merge

merge back with compat branch

create a branch compatible with mercurial between 3.0.1 and 3.1.2

evolve: fix suggested commands in "parents are not common" hint The argument to 'hg rebase' is --dest, not -dest. Also, the same command should not be suggested twice -- the second option should be the rebasing the other way around.

evolve: add missing newlines in "parents are not common" hint

test-touch: add a test for rename preservation after touch This bug was recently fixed in 3.2.

evolve: fix error during iteration over bumped changesets (bug38) We are iterating over a manifest while altering it. We cannot use iteritems() in this context. we move to items, that will be an issue for very large changesets.

evolve: add various version info to save time on troubleshooting

readme: drop the mention to the wip repo The time spend in work in progress repo are fairly low nowaday.

readme: update the contribution process The inability to easily pull from pull request on bitbucket and the lack of obsolescence support there are too much pain. Patchbombed contribution are flowing so we drop the bitbucket mention in the README.

merge 5.x line into stable (drop pre hg-3.2 compat)

evolve: add the missing newline to output messages where needed

evolve: add the missing argument to a debug statement