Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 11:55:58 +0200] rev 2506
stablerange: also respect the 'warm-cache' config
This will help large install to enable obshashrange as "opt-in" without
impacting other repositories.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 11:49:00 +0200] rev 2505
debugstablerange: cleanly "Abort" when no revision are specified
Previously we had a traceback from a max on an empty sequence.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 11:12:02 +0200] rev 2504
stablerange: use last recently used caching for revisions associated to ranges
This does not make things faster but at least it make them able to finish on
large repositories.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 30 May 2017 11:12:12 +0200] rev 2503
stablerange: report progress more often in slow case
For small repositories the time spent in progress was problematic. However on
large repository it quickly becomes negligible, so we add a way to detect this
case and report more often in this case.
Boris Feld <boris.feld@octobus.net> [Mon, 29 May 2017 14:03:31 +0200] rev 2502
template: update successors template output
Use templatekw._hybrid as return value for precursor template, it's nicer and
easier to play with than returning a formatted string.
Boris Feld <boris.feld@octobus.net> [Mon, 29 May 2017 17:54:14 +0200] rev 2501
test: extract metaedit tests into test-metaedit.t test file
The metaedit command deserver it own test file and this shave of 15% of the
runtime of test-evolve.t one of our longest tests.
Boris Feld <boris.feld@octobus.net> [Mon, 29 May 2017 12:15:47 +0200] rev 2500
template: update precursors template output
Use templatekw._hybrid as return value for precursor template, it's nicer and
easier to play with than returning a formatted string.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 29 May 2017 17:16:15 +0200] rev 2499
template: skip "fate" in test output when empty
This should clarify the test output a bit.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 29 May 2017 17:13:21 +0200] rev 2498
template: skip "successors" in test output when empty
This should clarify the test output a bit.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 29 May 2017 17:10:45 +0200] rev 2497
template: make the template definition more manageable
Readable config is readable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 29 May 2017 17:07:23 +0200] rev 2496
template: skip "Precursors" in test output when empty
This should clarify the test output a bit.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 29 May 2017 16:59:59 +0200] rev 2495
template: move each template on its own line during tests
This will clarify the various coming changes around template.
Boris Feld <boris.feld@octobus.net> [Mon, 29 May 2017 11:03:13 +0200] rev 2494
refactoring: rename obsfate template to obsfate_quiet
As I don't know how to handle templates arguments, create different templates
for each verbosity level wanted.
Boris Feld <boris.feld@octobus.net> [Mon, 29 May 2017 16:39:32 +0200] rev 2493
doc: add documentation about effectflag experiment
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 18:27:59 +0200] rev 2492
effectflag: split effect flag meta
Split effect flag meta into 3 separate flags:
- USERCHANGED
- DATECHANGED
- BRANCHCHANGED
Also display them separately for the moment, they could be grouped back
together if we want later.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 21:31:07 +0200] rev 2491
tests: update missing amend
(I need a hook)
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 19:21:36 +0200] rev 2490
template: update obsfate to be more human friendly
Approach the obslog output for the moment.
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 13:28:49 +0200] rev 2489
template: add the obsfate template
Reuse _getobsoletefate and nextvisiblesuccessors to easily get the
obsolescence fate of any node. The limitation is that obsfate is as precise as
these two functions, which is not great for nextvisiblesuccessors.
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 13:18:26 +0200] rev 2488
refactor: extract obs fate algorithm from _getobsoletereason
Refactor _getobsoletereason to extract the obs fate computation into a
separate function, it will be used later and put it in obshistory as it will
be needed in other files.
Rename _getobsoletereason to _getobsoletefateandsuccessors.
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 10:05:37 +0200] rev 2487
template: add successors template
The successors templates display the closest visible successors of each
changeset, we may have gap, like in this case:
A -> B -> C -> D
If we display A, C and D but not B, we can't display than B is the closest
successor of A because it's not displayed. We display C as the closest
successor of A instead.
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 10:05:27 +0200] rev 2486
template: add precursors template
The precursors templates display the closest visible precursors of each
changeset, we may have gap, like in this case:
A -> B -> C
If we display A and C but not B, we can't display than B is the closest
precursor of C because it's not displayed. We display A as the closest
precursor of C instead.
Add a new test file as we will need to generate theses gaps and modifying
test-evolve-obshistory.t will lead to many unrelated lines changes.
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 16:00:05 +0200] rev 2485
refactor: extract templates into a new file
Extract evolve template from evolve/__init__.py to evolve/templatekw.py as
more templates will come in the future.
Boris Feld <boris.feld@octobus.net> [Tue, 23 May 2017 19:48:04 +0200] rev 2484
obshistory: add the all option to obslog to show the while obs tree
Add a --all option to obslog in order to display also the successors of each
obs markers. It has the effect of showing a more comprehensive graph when a
split or a divergence happened.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 16:12:07 +0200] rev 2483
merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 May 2017 15:57:17 +0200] rev 2482
readme: update changelog for 6.2.2
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 15:01:21 +0200] rev 2481
test: fix test-evolve.t
Metaedit take the current date when no date is given. When we added default-
date, the date ended up to be the same and the behavior changed. Fix the text
by disabling default-date in the metaedit call and update the comment about
what is needed to fix correctly the test; take the changeset date when
metaediting only one changeset.
Boris Feld <boris.feld@octobus.net> [Fri, 26 May 2017 10:25:16 +0200] rev 2480
test: split evolve cycle tests in a separate test file
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 May 2017 21:14:04 +0200] rev 2479
evolve: fix --rev with --list
This was untested and never worked.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 24 May 2017 18:17:01 +0200] rev 2478
test: improve the globing for obsmarker date
If we force the date of obsmarkers, they will no longer include "20".
Boris Feld <boris.feld@octobus.net> [Tue, 23 May 2017 19:21:43 +0200] rev 2477
test: rename all olog references
Replace them by hg obslog which is more explicit.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 24 May 2017 18:17:01 +0200] rev 2476
test: improve the globing for obsmarker date
If we force the date of obsmarkers, they will no longer include "20".
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 24 May 2017 16:43:04 +0200] rev 2475
documentation: recomment using blackbox with the obshashrange experiment
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 23 May 2017 10:50:56 +0200] rev 2474
merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 23 May 2017 10:49:59 +0200] rev 2473
packaging: update the development version number
This helps catch non-tagged version installed with pip.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 23 May 2017 10:48:21 +0200] rev 2472
Added tag 6.2.1 for changeset 0af99106b075
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 23 May 2017 10:48:14 +0200] rev 2471
packaging: prepare release 6.2.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 16:01:59 +0200] rev 2470
compat: merge with stable
Stable has multiple changeset that solve deprecation warning for the future
Mercurial 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 15:45:42 +0200] rev 2469
test-compat: merge with mercurial-3.9
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 15:42:13 +0200] rev 2468
test-compat: merge with mercurial-4.0 branch
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 15:34:36 +0200] rev 2467
test-compat: merge with mercurial-4.1
Nothing to report
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 22 May 2017 15:28:36 +0200] rev 2466
test-compat: merge with stable
Nothing special to report, minor blackbox output update and color extensions was
needed for test-prune.t
Boris Feld <boris.feld@octobus.net> [Mon, 22 May 2017 12:00:57 +0200] rev 2465
deprecation: fix dirstate.beginparentchange deprecation warning
Replace calls to dirstart.beginparentchange and
dirstate.endparentchange to dirstate.parentchange context manager.
Boris Feld <boris.feld@octobus.net> [Mon, 22 May 2017 14:57:47 +0200] rev 2464
deprecation: fix cmdutil.command deprecation warning
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 23:58:55 +0200] rev 2463
obshistory: be more flexible about createmarkers API
The API got touched in core.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 23:56:33 +0200] rev 2462
inhibit: be more flexible on createmarkers API
This API got touched in core.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 14:27:23 +0200] rev 2461
merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 14:20:24 +0200] rev 2460
obshashrange: document the experiment
This should help people jump in.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 21 May 2017 13:55:09 +0200] rev 2459
obshashrange: add an option to disable local cache warming
The cache still a bit too volatile an costly to update. This offer a way for
developer working copy to only compute it when used.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 May 2017 03:31:42 +0200] rev 2458
obshashrange: re-warm less revision after reset
rewarming every single revision get very expensive quickly. Instead we warm few
key revision and rely on the fact this will warm enough useful subrange.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:52:09 +0200] rev 2457
effectflag: simplify meta data change testing
Let us just do one larger test.
G: changed hgext3rd/evolve/obshistory.py
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:50:49 +0200] rev 2456
effectflag: add a small comment to suggest improvement
The code run but we will likely need something easier to extend.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:50:00 +0200] rev 2455
effectflag: handle invalid data
If we get a marker with an invalid input we should not crash the whole process.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:49:20 +0200] rev 2454
effetflag: move the flag back with the test of the creation logic
Previous changeset was published by mistake.
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 20:21:10 +0200] rev 2453
obshistory: display informations from the obs marker effect flag
Leverage the effect flag to actually show what change for each
obsmarker in the obslog command. (first basic version).
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:43:16 +0200] rev 2452
test: add (glob) to globed line
Ingloriously forgot to amend.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 19:45:04 +0200] rev 2451
effectflag: add test combining multiple flag
We check that multiple changes might be detected a the same time.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 20:15:05 +0200] rev 2450
effectflag: basic diff change detection
We adds some basic diff detection.
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 19:52:57 +0200] rev 2449
effectflag: detect parent change
Add the detection of parent changes.
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 19:48:44 +0200] rev 2448
effectflag: detect meta changes
Add the detection of known meta field changes. The known meta
fields that we check are:
- user
- date
- branch
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 19:43:06 +0200] rev 2447
effect-flag: rework existing test to prepare for mor tests
Boris Feld <boris.feld@octobus.net> [Fri, 19 May 2017 18:43:21 +0200] rev 2446
effectflag: allow to save effect of change in obsmarkers
Obsmarkers lack a precious information, what are the changes between
the source and the destination. This could be several thing:
- The description has changed, with a amend -e for example
- The parent has changed, with a rebase for example
- The content has changed, with a amend for example
- The meta, like the user, has change, with a amend -u for example
Or any combination of them.
We hijack the createobsmarkers in order to compute the modification
and store the effect flag which is basically a bitfield of the
changes list above and we store it in the metadata for the moment.
The advantage of computing the flag just before creating the obs marker
is that all commands will immediately be compatible and we can start
working on the UI display of the flag. As a future optimization,
the commands will be able to pass the flag directly or data to help computing
them, for example amend knows if the description has changed or rebase now if
the parent has changed, virtually removing the overhead.
To start simple, this patch add the detection and storage of the effect flag
when the description has changed. And hide it behind an experimental flag
disabled by default 'experimental.evolution.effect-flags'. More flag will
follow.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 18:07:56 +0200] rev 2445
merge back with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 17:48:44 +0200] rev 2444
readme: fix version number
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 17:34:45 +0200] rev 2443
next: prevent a color related crash when evolve
This was not caught by test because they run color less.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 17:33:27 +0200] rev 2442
prune: prevent a color related crash when the working copy is moved
This was not caught by test because they run color less.
Rodrigo Damazio Bovendorp <rdamazio@google.com> [Thu, 18 May 2017 22:40:17 -0700] rev 2441
evolve: adding longer aliases for olog
Novice users will likely find the longer versions more obvious to understand
what they're doing (olog only makes sense once you already know what it does).
Especially on the help page, "obslog" will be easier to find and make sense
of.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 11:16:22 +0200] rev 2440
debugobsstorestat: add markers size information
We adds some extra information about markers size in all known format.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 00:15:30 +0200] rev 2439
packaging: bump version to 6.3.0.dev
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 00:10:12 +0200] rev 2438
merge back with stable (post-release)
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 00:14:20 +0200] rev 2437
packaging: bump version to 6.2.1.dev
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 May 2017 00:11:18 +0200] rev 2436
Added tag 6.2.0 for changeset d4ee0274a8ef
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:20:23 +0200] rev 2435
merge back with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:55:02 +0200] rev 2434
merge with future 6.2.0
No extra change were needed compared to 3.9.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:51:10 +0200] rev 2433
merge with future 6.2.0
The new 'olog' command is not working with 3.9 so we skill all mentions of it in
the tests. This also apply to the topic extensions.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:35:16 +0200] rev 2432
merge with future 6.2.0
Minor unrelated output adjustements were needed.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:12:52 +0200] rev 2431
merge with future 6.2.0
There are been (multiple) minor output changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:26:29 +0200] rev 2430
packaging: prepare release 6.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:26:06 +0200] rev 2429
debian: fix email
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:58:19 +0200] rev 2428
topic: update 'tested with' and readme
We are compatible with Mercurial 4.0 and above
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:25:43 +0200] rev 2427
readme: rearrange readme before release
There won't be a bugfix release (and other cleanup)
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 23:24:57 +0200] rev 2426
test: reduce output size to fight unstability
Until `hg touch` can be more stable, we have to do this :-/
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:57:20 +0200] rev 2425
tests: disable blackbox for 'getid'
This will significantly simplify the blackbox log.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:42:13 +0200] rev 2424
compat: handle lack of 'util.timer' for pre 4.2 version
We keep compatibility with previous Mercurial version by redefining the timer
when needed.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:53:01 +0200] rev 2423
test: enforce color to be enabled
4.2 enable color by default and start to get used in test. So we add this to the
test for previous version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 22:12:05 +0200] rev 2422
merge with default
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 21:59:10 +0200] rev 2421
tests: add a test about strip with obshashrange enable
I've seen some traceback but I cannot reproduce them. This tests seems useful
anyway.
Boris Feld <boris.feld@octobus.net> [Thu, 18 May 2017 18:35:34 +0200] rev 2420
obshistory: add a json test with cycles
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:40:20 +0200] rev 2419
tests: glob an absolute path
The ssh command path was in full and pointing the mercurial checkout of the last
one who touched the test.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:34:26 +0200] rev 2418
olog: document the default value
We actually display the log for '.' which is useful.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:29:28 +0200] rev 2417
readme: rearrange changelog content
blackbox is more important than the various caches changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:18:01 +0200] rev 2416
obshistory: rename the command to "olog"
The command start to look good enough to be handed out to user. We replace the
old and useless "olog" alias in favor of the new command.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:04:47 +0200] rev 2415
obshistory: move the command into the obshistory module
The root module is far too large already.
Boris Feld <boris.feld@octobus.net> [Thu, 18 May 2017 17:40:07 +0200] rev 2414
obshistory: add docstring to cmddebugobshistory
Add debugobshistory command documentation based on the log command
documentation.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 17:47:59 +0200] rev 2413
obshashrangecache: make sure we re-warm the cache after a reset
This will "mitigate" the effect of dropping existing entries when new markers
affect existing range.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 17:35:36 +0200] rev 2412
obshashrangecache: precisely track affected revs when adding new markers
This will be useful when we start doing finer grained invalidation (instead of
dropping all data).
Boris Feld <boris.feld@octobus.net> [Thu, 18 May 2017 14:58:22 +0200] rev 2411
debugobshistory: handle multiple cycles
We previously handled up to one cycle only. This is now fixed.
Boris Feld <boris.feld@octobus.net> [Thu, 18 May 2017 14:49:02 +0200] rev 2410
test: clean the debugobshistory cycle test
Use 'desc(...)' instead of revision numbers.
Also blank lines between commands in the same test
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 17:03:11 +0200] rev 2409
obsdiscovery: add more debug output
we add a summary debug output to help gathering data.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 16:59:25 +0200] rev 2408
discovery: log information about obshashrange
We augment the blackbox output to help with data gathering.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 11:29:27 +0200] rev 2407
obshistory: add a graph option on the debugobshistory command
Add a graph option (--graph) to the debugobshistory. The output is
like the 'hg log -G' output. The option is activated by default but
can be deactivated with '--no-graph' option.
There are various issue with the current implementation (multiple cycles
handling, N² complexity) but this can be fixed later.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 11:29:23 +0200] rev 2406
obshistory: import 'node' as 'nodemod'
This simplify the next changeset.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 11:00:06 +0200] rev 2405
label: add a label for the node in the "wc now at" message
MOAR COLOR FOR THE COLOR GOAD!
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 10:56:08 +0200] rev 2404
label: rename 'evolve.short_node' to 'evolve.node'
A wider labelk will helps compatibility.
Boris Feld <boris.feld@octobus.net> [Wed, 17 May 2017 19:20:43 +0200] rev 2403
obshistory: refactor debugobshistory
Rename the function and extract the heavy work of the command
in a separate module named obshistory.py
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 18:54:48 +0200] rev 2402
test: adapt to change in cache warming in core
Core Mercurial has a more rational cache warming strategy now. 24f55686a63d
stopped warming of the cache after every changegroup application (in favor of
end of transaction warming). This reflect in the blackbox test output.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 18:38:13 +0200] rev 2401
test: adapt to change in cache warming in core
Core Mercurial has a more rational cache warming strategy now. 2b6692df1bdf
stopped warming of the cache after every commit (in favor of end of transaction
warming). This reflect in the blackbox test output.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 18:47:22 +0200] rev 2400
stablerangecache: avoid crash when 'cache/' directory is missing
If the directory is missing, we create it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 18:40:48 +0200] rev 2399
obshashrange: avoid crash when 'cache/' directory is missing
If the directory is missing, we create it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 17:16:59 +0200] rev 2398
tests: apply output changes from core fix
Mercurial core fixed a bug were the obsolete set (and all depending data) stayed
invalid after markers were merged. Fixing this bug is fixing some bad output on
the evolve side so we apply the output change.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 15:49:21 +0200] rev 2397
packaging: mention 'dev' status in the version number
Boris Feld <boris.feld@octobus.net> [Wed, 17 May 2017 09:28:10 +0200] rev 2396
color: update the shorttemplate to use colors
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 14:49:02 +0200] rev 2395
merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 14:40:18 +0200] rev 2394
obshashrange: cleanup 'valid' life cycle
- reset is only called when we detect a strip, the on disk data are invalid,
- after a reset, we should not keep using the data base connection,
- after a write, the on disk data are valid.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 12:27:13 +0200] rev 2393
obsrangecache: raise programming error when using an unwarmed cache
This will provide a better experience for developer using this the cache.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 13:27:29 +0200] rev 2392
obshashrange: stop marking on-disk data as invalid on clear
This was abusing and prevent proper use of the on disk cache.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 13:16:18 +0200] rev 2391
obshashcache: purge the meta line before writing a new one
Otherwise we get multiple lines and this gets messy.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 13:14:50 +0200] rev 2390
obshashrange: drop spurious whitespace
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 12:25:56 +0200] rev 2389
obshashcache: invalidate affected cache entries on side
Calling reset during upgrade is screwing up the cache key update.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 12:26:15 +0200] rev 2388
obshashcache: properly break out of all loops
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 12:23:10 +0200] rev 2387
dualsourcecache: simplify cachekey.clear
We do not needs the super call anymore and we can make the reset case more
explicit. So we do.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 11:58:48 +0200] rev 2386
tests: small test update
This is a bit clearer.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 11:23:33 +0200] rev 2385
dualsourcecache: fix obskey return by _checkkey
The function was returning the old key instead of the new one. This is now
fixed.
Boris Feld <boris.feld@octobus.net> [Wed, 17 May 2017 11:47:14 +0200] rev 2384
test: update test-obsolete.t to use common.sh
The definition of getid() in the test file was wrong, use the one
from common.sh instead
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:23:31 +0200] rev 2383
obshashrange: log reset from new markers
This will help tracking performance impact from current limitation.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:18:46 +0200] rev 2382
dualsourcecache: log cache reset
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 17:03:34 +0200] rev 2381
stablerange: log time spent updating the stable range
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 16:56:37 +0200] rev 2380
cache: track time spend updating various cache
This produce more useful blackbox log.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 15:20:53 +0200] rev 2379
obshashrange: adds blackbox usage in tests
This will help track the validation of the cache.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:45:08 +0200] rev 2378
obshashrange: test behavior in case of rollback
The cache should be properly invalidated.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:42:50 +0200] rev 2377
obshashrange: extend tests
We test more situations.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:18:30 +0200] rev 2376
dualsourcecache: add a cache name
This will be used to automatically log message for blackbox
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:17:13 +0200] rev 2375
obscache: stop definition of the empty key
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 11:41:36 +0200] rev 2374
obshashrange: keep value fetched from sql in memory
This will reduce the number of roundtrip to the data base we need.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 11:37:45 +0200] rev 2373
obshashrange: stop inheriting from 'dict'
A simple dictionary attribute seems more simpler.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 09:52:06 +0200] rev 2372
merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 00:23:19 +0200] rev 2371
obshashrange: to not overwrite the list with the set
We reusing the list variable lower in the code.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 00:22:24 +0200] rev 2370
obshashrange: properly break out of the two loops
Otherwise we would continue to iterate even after we reseted the cache.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 00:21:30 +0200] rev 2369
obshashrange: fix reset conditional
If the revision is in "revs" we should not reset the cache. The old code was
wrong (Thanks goes to new tests for catching this).
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 11:21:41 +0200] rev 2368
cache: ensure we warm stablerange cache before the obshashrange cache
I've been seeing traceback that seems to be happening because of issues in this
area.
Rodrigo Damazio Bovendorp <rdamazio@google.com> [Tue, 16 May 2017 23:37:10 -0700] rev 2367
evolve: fixing obscache invalidation
This was missing a call to the parent's destroyed(), such that any transaction
after stripping some nodes would result in a crash (by attempting to read nodes
which were stripped).
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 21:21:31 +0200] rev 2366
obshashrange: warm the cache at the end of each transaction
This will help having warmed cache for read only client.
The warming is still imperfect in case of markers that trigger a reset, but we
are in a better place than what we used to be.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 21:00:39 +0200] rev 2365
obshashrange: warm cache outside of loops
The performance impact will be lower
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 21:20:02 +0200] rev 2364
obshashrange: "update" the cache on each transaction close
Right now the "update" does not really file the cache, but it will detect
invalid situation and clean them.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 20:52:19 +0200] rev 2363
obshashrange: properly invalidate the cache on destroyed
Copy paste is the scurge of code source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 20:49:27 +0200] rev 2362
obshashrange: properly drop the current connection on clear
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 20:40:00 +0200] rev 2361
obshashrange: exit early if nothing to write
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 20:29:54 +0200] rev 2360
obshashrange: use the dualsourcecache as a base for the cache
This will easily open the way to incrementally updated obshashrange cache.
Small update are needed to the data base schema so be bump the version
Currently the update function is not warming the cache (but details case where
it is invalidated).
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 20:28:09 +0200] rev 2359
obscache: makes dualsourcecache compatible with obshashrange cache needs
The goal of the abstract method is to be reusable. So we make sure it is
reusable.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 21:20:40 +0200] rev 2358
readme: add a changelog entry about the more efficient obscache
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 19:18:49 +0200] rev 2357
obscache: extract a data agnostic class
We now have an independent class that we can reuse for other purpose
(eg: obshashrange cache)
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 19:07:14 +0200] rev 2356
obscache: extract the actual data update in a dedicated function
This will help extract a data agnostic class.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 19:05:46 +0200] rev 2355
obscache: move an assert to a lower level
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 19:04:13 +0200] rev 2354
obscache: use 'nullid' as the hash of an empty obsstore
This align this result with what we use for 'emptykey'
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 18:56:56 +0200] rev 2353
obcache: move empty on the class
We'll extract a smaller data agnostic class but we need to gather all method on
it first.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 18:56:42 +0200] rev 2352
obcache: move _checkkey on the class
We'll extract a smaller data agnostic class but we need to gather all method on
it first.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 18:52:59 +0200] rev 2351
obcache: move updateneeded on the class
We'll extract a smaller data agnostic class but we need to gather all method on
it first.
Boris Feld <boris.feld@octobus.net> [Fri, 12 May 2017 18:34:37 +0200] rev 2350
obshistory: only display each revision once in debugobshistory
When using a revision range, the same precursor could have been
displayed more than once. Use a cache to display each revision
only once.
It's a fix until we found the nicest way to display obs history.
Boris Feld <boris.feld@octobus.net> [Fri, 12 May 2017 11:39:41 +0200] rev 2349
obshistory: display a message when one marker node has no change ctx
When exchanging obs markers, there is some change contexts
referencing change contexts that are not available locally.
As we cannot display informations about them, instead print a
message saying so.
Boris Feld <boris.feld@octobus.net> [Wed, 10 May 2017 14:46:01 +0200] rev 2348
ui: hg topic now display if current revision is in bad state (issue5533)
Previously, hg topic didn't showed the state of the current
revision. Now if show both informations.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 11 May 2017 17:00:55 +0200] rev 2347
obsstore: also guard agains changing object in '_checkkey'
The 'upgradeneeded' function needs to be able to pass the object it fetched once.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 11 May 2017 16:58:43 +0200] rev 2346
obscache: guard from changing changelog or obsstore object
We access these object once to make sure they will never change through the
function (and their content will be fixed).
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 11 May 2017 16:45:13 +0200] rev 2345
obscache: return the new data along-side the upgrade needs (and cache key)
Having one function returning consistent data will help prevent race.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 11 May 2017 16:06:31 +0200] rev 2344
obscache: use the smaller scope function
This make the function simpler and allow larger update on the 'upgradeneeded'
one.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 11 May 2017 16:05:50 +0200] rev 2343
obscache: extract the cache key validation in its own function
This help keep the "up to date logic" simpler and prepare a more complex
version of the "upgradeneeded" logic that would return the full data needed for
the upgrade.
Boris Feld <boris.feld@octobus.net> [Wed, 10 May 2017 11:52:11 +0200] rev 2342
obshistory: use formatter instead of ui.write in the debugobshistory command
Replace ui.write with a formater to have template support and json output.
Update tests to assert json outputs.
Boris Feld <boris.feld@octobus.net> [Wed, 10 May 2017 09:55:22 +0200] rev 2341
ui: Fix hg stack json output
Previously 'hg stack -Tjson' generated invalid output
like:
[
{
"isentry": true,
"topic.stack.desc": "...",
"topic.stack.index": 1,
"topic.stack.state": "current",
"topic.stack.state.symbol": "@"
}
]
,
{
"isentry": true,
"topic.stack.desc": "...",
"topic.stack.index": 1,
"topic.stack.state": "current",
"topic.stack.state.symbol": "@"
},
{
"isentry": false,
"topic.stack.desc": "...",
"topic.stack.state": "base",
"topic.stack.state.symbol": "^"
}
]
I de-indented the fmt.end() to generate this output:
[
{
"isentry": true,
"topic.stack.desc": "...",
"topic.stack.index": 1,
"topic.stack.state": "current",
"topic.stack.state.symbol": "@"
},
{
"isentry": false,
"topic.stack.desc": "...",
"topic.stack.state": "base",
"topic.stack.state.symbol": "^"
}
]
I've also added a test case.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 10 May 2017 13:04:31 +0200] rev 2340
topic: configure some default color for topic
This makes thg usable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 10 May 2017 13:03:05 +0200] rev 2339
topic: automatically configure thg to display topic
If no other config is set, we configure Tortoise-hg to display topic. This
should helps usability.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 10 May 2017 13:08:45 +0200] rev 2338
readme: update readme to mention 'debugobshistory'
Boris Feld <boris.feld@octobus.net> [Tue, 09 May 2017 17:43:39 +0200] rev 2337
obshistory: add some color
Boris Feld <boris.feld@octobus.net> [Wed, 10 May 2017 12:26:33 +0200] rev 2336
obshistory: add a debugobshistory command to show obs history of a revs
Add the debugobshistory command that accept a revision range and display
the obsolescence containing each revision in the range.
For the moment, it only displays the predecessors.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 10 May 2017 12:16:01 +0200] rev 2335
tests: add the commit style checker from Mercurial
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 09 May 2017 19:13:12 +0200] rev 2334
obscache: update the cache key in place
Instead of computing the key in place, we update the existing one using the
data used for the incremental update of the content. This will help reaching
purely incremental cache eventually.
The 'getcachekey' function is dropped as it is no longer used.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 09 May 2017 19:02:04 +0200] rev 2333
obscache: distinct 'clear' and 'reset'
We make a difference between basic invalidatiton (or lack of loading) and
'reset' (current cache data are invalid).
We can now ensure a non-None key when we start the update. This will allow us
to "update" the existing key instead of recomputing one from scratch. This is
more efficient and less racy.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 04 May 2017 21:24:02 +0200] rev 2332
merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 04 May 2017 21:21:59 +0200] rev 2331
serveronly: also enable the obscache for server only setting
The obscache is useful and speeds things up. So we also enable for server only
setting.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 04 May 2017 14:02:30 +0200] rev 2330
obscache: document a possible way forward to skipping obsstore parsing
We document a possibly viable idea for updating the cache on new revs without
having to fully parse the obsstore.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 03 May 2017 23:07:01 +0200] rev 2329
obscache: update some documentation
Update some data and do some proof reading.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 03 May 2017 21:47:06 +0200] rev 2328
obscache: Only access the new obsmarkers for marker update
Since we know what what is the part of the file with "new" markers we can just
access these.
If the cache was up to date before the transaction, we'll re-parse data we just
wrote. See the inline comment for details. This is good enough for now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 03 May 2017 20:56:26 +0200] rev 2327
obscache: extract _updatemarkers code into its own function
This split the update logic from the bit retrieving markers. That cannot be bad.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 03 May 2017 18:46:48 +0200] rev 2326
obscache: extract code to update from new revision
Code cleanup and prepare upstreaming. The make the code more likely to work with
the key validation returning an iterator of revs to update the cache with.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 03 May 2017 18:33:53 +0200] rev 2325
obscache: move assert earlier in the code
If we are to crash, let us crash earlier.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 03 May 2017 13:58:32 +0200] rev 2324
merge back with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 03 May 2017 13:58:06 +0200] rev 2323
Added tag 6.1.0 for changeset 8510d3fd7c3b
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 03 May 2017 13:57:55 +0200] rev 2322
packaging: prepare version 6.1.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 03 May 2017 13:54:12 +0200] rev 2321
meta: update tested version to 4.1.2
We tested against the latest 4.1 too.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 03 May 2017 13:52:19 +0200] rev 2320
merge with future 6.1.0
No extra adjustment needed from hg-3.9 result
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 03 May 2017 13:23:36 +0200] rev 2319
merge with future 6.1.0
No extra adjustment needed from hg-4.0 result
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 03 May 2017 13:18:08 +0200] rev 2318
merge with future 6.1.0
In addition to the output reverted for 4.1, we also drop the "troubles:" entry
from the standard log.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 03 May 2017 13:12:39 +0200] rev 2317
merge with future 6.1.0
test pass fine except for the removal of the extra data when accessing hidden
revision. The better message are 4.2+ only.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 03 May 2017 13:27:26 +0200] rev 2316
compat: drop the context manager used to write the cache file
Mercurial 3.8 does not supports context manager on atomic temporary file.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 03 May 2017 12:54:11 +0200] rev 2315
compat: make obscache code compatible with Mercurial version prior to 4.2
the phasecache.getrevset method is new in 4.2.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 03 May 2017 12:41:54 +0200] rev 2314
evolve: record testing with 4.2
4.2 is now a things and tests pass fine.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 03 May 2017 12:31:40 +0200] rev 2313
merge with default for 6.1.0
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 03 May 2017 12:31:11 +0200] rev 2312
packaging first step toward 6.1.0
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 03 May 2017 12:25:53 +0200] rev 2311
auto-push: move config help in the extension help
That is a better spot than the extension itself.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 01 May 2017 06:17:44 +0200] rev 2310
opening mercurial 4.1 compat branch
This branch will receive test update implied by the 4.2 → 4.1 changes.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 02 May 2017 17:43:34 +0200] rev 2309
obscache: skip writing to disk if the data did not changed
This will avoid rewriting the cache for every single transaction.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 02 May 2017 16:19:05 +0200] rev 2308
obscache: skip writing if the cache is empty
if the cache is empty, we can just skip writing to disk.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 02 May 2017 16:17:03 +0200] rev 2307
obscache: set a valid "empty" cache key if the cache is missing
This avoid detecting bad cache when it just happens to be no cache.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 02 May 2017 16:10:14 +0200] rev 2306
obscache: have the obsstore fix empty file cachekey
Before this change, the missing file and empty file returned different value.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 02 May 2017 17:44:12 +0200] rev 2305
obscache: log case where the cache is not up to date
This will help track performance issue
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 02 May 2017 16:13:04 +0200] rev 2304
obscache: still update and use the cache during transaction
Other code might access the obsolete set in the middle of a transaction. It is
better to use the case in that case since the update will eventually be written
when the transaction is committed.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 02 May 2017 16:15:01 +0200] rev 2303
obscache: warm the cache in all cases
There are case when the obsstore have been invalidated, but we still need to
update the cache.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 02 May 2017 16:11:43 +0200] rev 2302
obscache: update the format to allow negative tiprev
If the changelog is empty (but the obsstore is not) the 'tiprev' will be -1.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 02 May 2017 16:09:03 +0200] rev 2301
obscache: load the disk data before checking is the cache is up to date
This is actually required since non-loaded cache will never be up to date...
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 02 May 2017 02:13:33 +0200] rev 2300
obscache: skip the cache entirely if not up to date
The current update code has some race condition windows around updating. But we
also ensure the cache are up to date with every transaction. So outdated cache
mean another client have been mudding the repository but things will get back
in place at the next transaction.
So we just skip using the cache when not up to date. This is not the best we
could do. But this is good enough for now.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 01 May 2017 15:49:36 +0200] rev 2299
readme: mention that some improvement are enabled for 4.2 only
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 01 May 2017 08:12:26 +0200] rev 2298
perf: use the cache to compute the obsolete set.
The official "obsolete" computation is switch to using the cache. This provide
noticable speed for operation that does not need to actually access the
obs markers. The part relating to obsolete changeset computation disappear from
the execution profile when it is used.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 01 May 2017 08:14:00 +0200] rev 2297
perf: warm the cache after all transactions
This is the simplest way to ensure the data are up to date.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 01 May 2017 08:13:24 +0200] rev 2296
perf: adds a cache to know if obsmarkers might affect a revision
Phase information still needs to be thrown in the mix to compute the final
information, but skipping reading the obsstore for most operation is a large
win.
Usage of this cache arrives in the next changeset.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 01 May 2017 08:07:05 +0200] rev 2295
perf: adds cachekey utility to validate changelog+obsstore content
We adds more helper about cache key to prepare the arrival of a cache that can
be updated iteratively (similar to branchmap cache)
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 01 May 2017 08:05:45 +0200] rev 2294
perf: adds some cache key helper on the obsstore class
This will be useful to allow validating cache depending on obsstore without
parsing the whole obsstore.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 01 May 2017 06:06:41 +0200] rev 2293
compat: only install the better filtered message for mercurial 4.2 and above
The helper function does not exist in earlier version.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 29 Apr 2017 05:35:01 +0200] rev 2292
evolve: update extension help
I'm pretty sure there are some missing bits, but this cannot be worse than
before.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 29 Apr 2017 05:44:07 +0200] rev 2291
merge with stable
Boris Feld <boris.feld@octobus.net> [Fri, 28 Apr 2017 16:56:09 +0200] rev 2290
ui: change the hidden revision error message
It now display the same details than the warning
when the working directory parent become obsolete
like:
$ hg update 0
abort: hidden revision '0' (successor: f301a99bd857)!
$ hg up 1
abort: hidden revision '1' (pruned)!
$ hg update 0
abort: hidden revision '0' (successors: 91311af6da10, 70653776ec4c)!
Boris Feld <boris.feld@octobus.net> [Fri, 28 Apr 2017 16:57:41 +0200] rev 2289
ui: add better messages when the working copy become obsolete.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Fri, 28 Apr 2017 15:29:32 +0200] rev 2288
topic: directly use "super" call
That is how one is supposed to do it.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 27 Apr 2017 20:52:09 +0200] rev 2287
repo: properly progate "destroyed" call to super class
The propagation of the 'destroyed' call was dropped. I'm not certain of the
consequences of having a partially broken "destroyed" call, but this can't be
good.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 25 Apr 2017 10:56:55 +0200] rev 2286
safeguard: add an option to disable automatic publishing
Pushing to publishing server by mistake is a bit too common in the current state
of evolve. Especially when the lack of good feature branch story make the use of
-f a bit too common.
So we add a very simple experimental option to allow warning (or abort) when
changeset are pushed to a publishing server. This is unlikely to survive as is,
but this is useful now.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 13:05:45 +0200] rev 2285
merge back with stable
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 13:04:31 +0200] rev 2284
Added tag 6.0.1 for changeset 5ef112a6eb87
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 12:59:19 +0200] rev 2283
pkg: prepare release 6.0.1
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 12:58:27 +0200] rev 2282
debian: finalize 6.0.0 entry
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 12:54:57 +0200] rev 2281
readme: fix 6.0.0 release date
It was March, not February.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 12:50:22 +0200] rev 2280
merge with future 6.0.1
Nothing special to report
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 12:48:31 +0200] rev 2279
merge with future 6.0.1
Nothing special to report
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 12:45:02 +0200] rev 2278
merge with future 6.0.1
Nothing special to report
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 12:24:43 +0200] rev 2277
checkheads: update tests to match the one in core
These test now exists in core, so we update the evolve version.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 11:43:57 +0200] rev 2276
serveronly: fix reposetup
The local 'reposetup' function was shadowing the extension helper one. We add a
test for obshashrange using 'serveronly' since this is the item that made use
discover the issue.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 11:41:20 +0200] rev 2275
extension: simplify the extensions helper hierarchy
If one mode depends on the other, its extensions helper is merged.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 20 Apr 2017 11:40:08 +0200] rev 2274
checkheads: do not overwrite code for Mercurial 4.2 and above
The fix has been ported to Mercurial core as c6cb21ddf74a.
Yuya Nishihara <yuya@tcha.org> [Thu, 20 Apr 2017 00:21:13 +0900] rev 2273
legacy: fix debugrecordpruneparents to call obsstore.create() with keywords
It appears the API was changed twice in Mercurial at
- 570f87422f54 "obsstore: add an explicit `date` argument to obsstore.create"
- adb3798dce49 "obsstore: add a `parents` argument to obsstore.create"
and metadata would be changed to a list of (key, value) pairs. Convert it back
to a dict as expected by create().
Yuya Nishihara <yuya@tcha.org> [Wed, 19 Apr 2017 21:17:43 +0900] rev 2272
template: adapt to new showlist() API introduced by hg e5eab0fe69ee
Yuya Nishihara <yuya@tcha.org> [Wed, 19 Apr 2017 21:12:09 +0900] rev 2271
template: pass all mapping data to showlist()
Otherwise a keyword depending on repo or ctx couldn't be rendered.
Yuya Nishihara <yuya@tcha.org> [Wed, 19 Apr 2017 21:37:28 +0900] rev 2270
make: merge recipes for help
Yuya Nishihara <yuya@tcha.org> [Wed, 19 Apr 2017 21:34:03 +0900] rev 2269
make: fix indent of ifeq-endif
ifeq() can't be a recipe.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 08 Apr 2017 12:48:20 +0200] rev 2268
tests: update test to match upstreamable version
Name have been clarified, documentation has been updated and some test-case have
been updated to match the intended test.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 08 Apr 2017 12:45:39 +0200] rev 2267
tests: fix directory names in exchange-D4 test
The test is based on another one and the directory name had not been updated.