Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Fri, 26 Aug 2016 12:37:52 +0200] rev 1990
stack: extra argument validation logic outside of showstack
It seems sensible keep the 'showstack' function purely about actually displaying
and existing stack.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 23 Aug 2016 21:18:47 +0200] rev 1989
summary: properly label the topic name in summary
This should be labelled 'topic.active' so that color can pick it up properly.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 23 Aug 2016 23:38:28 +0200] rev 1988
topic: list the branches this topic belong to when verbose
Using the verbose listing a bit more, this seems to be useful information.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 16 Aug 2016 15:43:06 +0200] rev 1987
topic: properly justify the verbose data when listing topic
We align all data to the widest topic.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 16 Aug 2016 15:32:54 +0200] rev 1986
ngtip: rely on topicmap for 'ngtip'
ngtip is an old function that predates the introduction of a more proper topic
aware 'topicmap'. We replace the old code with a call to the new one. This
change set function return type and have minor effect in a couple of place.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sun, 14 Aug 2016 19:57:58 +0200] rev 1985
topic: list the number of 'behind' changeset when --verbose is used
Displaying more information in the topic list is useful, we continue with the
number of 'behind' changesets. This 'behind' count the number of new changesets on
the default rebase destination. This will highlight topics that need rebasing.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 15 Aug 2016 00:19:44 +0200] rev 1984
destination: honor the sourceset argument of _destmerge
Mercurial gained a "sourceset" argument to compute the merge destination of any
changeset (the one in the 'sourceset'). This now works for the version
in topic too. The support is quite basic (because we pick only one changeset
from the sourceset) but that's a start.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 15 Aug 2016 05:25:53 +0200] rev 1983
destmerge: improve topic head computation and handling
This rework get use two benefits:
- heads are now computed on a "stabilized" state,
- heads above the 'source' are now properly cleaned up,
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 15 Aug 2016 05:15:19 +0200] rev 1982
evolve: extract the code copied from evolve in a submodule
This will allow us to use that code in other module.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 15 Aug 2016 01:50:15 +0200] rev 1981
destmerge: honor the 'onheadcheck' argument
This argument was introduced in Mercurial some time ago but the topic extension
was never updated to take it in account. This is now fixed.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sun, 14 Aug 2016 23:17:09 +0200] rev 1980
destination: use the correct abort class for error
These errors have been in Mercurial long enough. Having them will make the coming
changesets simpler.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sun, 14 Aug 2016 19:40:53 +0200] rev 1979
topic: list the number of head when --verbose is used
Displaying more information in the topic list is useful, we continue with the
number of heads on the topics, this will help highlight the problem to users. We
only display head if there is more than one.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 13 Aug 2016 01:24:10 +0200] rev 1978
topic: list the number of troubled changesets when --verbose is used
Displaying more information in the topic list is useful, we continue with the
number of troubled changesets. This will help people to spot topics that needs
evolution, for example after a pull.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Fri, 12 Aug 2016 23:59:37 +0200] rev 1977
topic: list the number of changesets when --verbose is used
Displaying more information in the topic list is useful, we start with the most
obvious: number of non-obsolete changeset in the topic.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sun, 14 Aug 2016 20:40:46 +0200] rev 1976
topic: add color for the active topic
We reuse the same color that the one used for the active bookmark.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 13 Aug 2016 00:37:33 +0200] rev 1975
topic: add formatter support
Using formatter to output the list of topic will add support for color and
richer templater. We add some test for output control.
We introduce a dedicated test to help with coming more complexe output.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 13 Aug 2016 00:13:05 +0200] rev 1974
topic: extract the code listing all topics
The code will become more complexe with formatter support and additional data in
the verbose output. We extract the code in its own function first.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Fri, 12 Aug 2016 11:09:26 +0200] rev 1973
stack: introduce and explicite command to display the stack
If is worth testing having the feature lives outside 'hg topic --list'. The
'stack' name is sub optimal because the conflict with 'status'. using "hg st"
would still work as 'st' is hard coded, but this mean 'hg stack' has no short
version.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 11 Aug 2016 22:52:49 +0200] rev 1972
testedwith: update to 3.9
This is might still 3.7 compatible but I'm no longer running the test and I
would says the user base is small enough to not care.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 11 Aug 2016 22:50:58 +0200] rev 1971
topic: make sure we have the 'wlock' when setting topic
We where writing the '.hg/topic' file without a lot. That was bad.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 13 Jul 2016 16:19:41 +0200] rev 1970
cleanup: removed unused mercurial.util import
timeless@gmail.com [Fri, 08 Jul 2016 16:59:43 +0000] rev 1969
compat: tolerate missing rebase extension
timeless@gmail.com [Fri, 08 Jul 2016 16:09:55 +0000] rev 1968
compat: mercurial dropped alias for hashlib.sha1
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 11 May 2016 16:22:52 +0200] rev 1967
destination: add an XXX about handling destspace in destmerge
This that we hopefully do not forget about this.
Sean Farley <sean@farley.io> [Mon, 25 Apr 2016 21:24:20 -0700] rev 1966
update: calculate 'partial' as core does
Sean Farley <sean@farley.io> [Mon, 25 Apr 2016 20:00:19 -0700] rev 1965
discovery: flake8
Sean Farley <sean@farley.io> [Mon, 25 Apr 2016 19:59:05 -0700] rev 1964
destination: flake8
Sean Farley <sean@farley.io> [Tue, 22 Mar 2016 14:51:35 -0700] rev 1963
style: update __init__.py
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 11 May 2016 16:06:58 +0200] rev 1962
compat: adapt to the new destspace argument of destmerge
The argument is currently ignored in the topic case for simplicity, but we
properly accept it and propagate it to the original function to prevent crash
and behavior regression in the non-topic case.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 04 Apr 2016 00:28:03 -0700] rev 1961
stack: prevent crash when topic is rooted on nullid
We exclude null from displayed base. This was causing a crash when trying to
display its description (we'll still have to handle the empty description case,
but it is now less urgent).
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 04 Apr 2016 00:22:20 -0700] rev 1960
test: add topic on the first 2 changesets too
This will be used to add a test for topic rooted on nullid. We introduce this in
its own changeset to reduce the noise if the actual changeset.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 04 Apr 2016 00:17:54 -0700] rev 1959
test: remove comment about new head warning
The new head warning was buggy. This was fixed in bdc5bb223b50.
Pierre-Yves David <pierre-yves.david@fb.com> [Sun, 03 Apr 2016 21:41:38 -0700] rev 1958
stack: also change the indexing of the t# reference
Changeset 61f36480740f changed the index displayed (we now index from 1), but
forgot to update the logic used to resolve the 't#' name.
This changeset fixes it.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 01 Apr 2016 16:58:52 -0700] rev 1957
stack: change the ascii symbold for base
Now that the children line go upward, '_' is no longer clear as is take the lower part of the line. We go for '^' that use the upper part.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 01 Apr 2016 16:57:11 -0700] rev 1956
stack: reverse the display order
Most mercurial command display the most recent changeset first. We put `hg topic --list` inline with this.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 01 Apr 2016 16:55:24 -0700] rev 1955
topic: extract display from entry computation
We are about to reverse the order of the output (most recent first) so it will
be useful.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 01 Apr 2016 16:40:19 -0700] rev 1954
stack: start indexing at 't1' instead of 't0'
I think 't0' could have special meaning (eg: before 't1', but still with topic
activated) so let's keep room for that. Indexing from 1 is not crazy anyway.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 23:58:30 -0700] rev 1953
commit: wrap "commitstatus" to take topic into account
The "created new head" message was appearing for every single commit made on a
topic. It should now properly only appears when a new head is actually created
on a topic.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 23:55:31 -0700] rev 1952
uisetup: add call to 'topicmap.modsetup'
this was forgotten in 99c1a26abf3f. Tests did not broke because the wrapping of
cg.apply only have performance impact (cache warmup).
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 22:33:06 -0700] rev 1951
uisetup: move all remaining wrapping into uisetup
All our wrapping is now properly done at uisetup time. Hooray.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 22:31:24 -0700] rev 1950
topicmap: move 'cgapply' wrapping into the topicmap module
More gathering of related logic.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 22:25:17 -0700] rev 1949
topicmap: move the 'usetopicmap' context manager into the topicmap module
There is no good reason to not have it gathered with the rest.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 22:05:49 -0700] rev 1948
patch: move setup of import/export logic into a function
The function is now called during uisetup.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 22:04:25 -0700] rev 1947
patch: remove version compatibility check
We don't support anything under 3.7.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 22:03:44 -0700] rev 1946
patch: document the section about import/export
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 22:02:52 -0700] rev 1945
patch: move import/export wrapping close to the function definition
This gather similar logic together.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 21:53:55 -0700] rev 1944
discovery: move all setup into a 'modsetup' function
The various wrappings are moved into a function that live in the module and the
function is now properly called during 'uisetup'.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:22:50 -0700] rev 1943
revset: add a ui argument to 'modsetup'
This is a gratuitous change for consistency with the function that use it.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:21:44 -0700] rev 1942
revset: run 'modsetup' at uisetup time
We are slowly moving away from module time wrapping. These thing should be done
in the dedicated 'setup' method called by Mercurial.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:20:16 -0700] rev 1941
destination: rename 'setupdest' to 'modsetup'
the topic.revset module use 'modsetup' as a name for its setup function. It
looks like a good name, lets unify names toward that.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:16:19 -0700] rev 1940
destination: document 'setupdest'
Let's make the role of this function clear.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:15:47 -0700] rev 1939
destination: add a ui argument to 'setupdest'
This is a gratuitous change for consistency.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:12:43 -0700] rev 1938
destination: make sure 'setupdest' is the latest function in the module
Let's introduce some consistency, end of module seems fine.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:45:29 -0700] rev 1937
topicmap: move to new style import
This unify with the new core Mercurial usage and this will make future changes
to the imports easier to track.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:45:18 -0700] rev 1936
stack: move to new style import
This unify with the new core Mercurial usage and this will make future changes
to the imports easier to track.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:45:10 -0700] rev 1935
revset: move to new style import
This unify with the new core Mercurial usage and this will make future changes
to the imports easier to track.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:44:59 -0700] rev 1934
discovery: move to new style import
This unify with the new core Mercurial usage and this will make future changes
to the imports easier to track.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:44:47 -0700] rev 1933
destination: move to new style import
This unify with the new core Mercurial usage and this will make future changes
to the imports easier to track.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:44:37 -0700] rev 1932
init: move to new style import
This unify with the new core Mercurial usage and this will make future changes
to the imports easier to track.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 30 Mar 2016 03:56:14 -0700] rev 1931
test: disable the new style rendering for "missing parent"
The style kicks in when we display a partial tree. Supporting test running both
3.7 and default with this is painful, we disable the new feature for now.
Sean Farley <sean@farley.io> [Mon, 21 Mar 2016 21:39:14 -0700] rev 1930
tests: add pyflakes test
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 28 Mar 2016 00:50:36 -0700] rev 1929
setup: make sure we use the imported module
This prevent pyflakes to complains about it (and work around any possible demand
import magic.
I'm not sure why we do this important dance at all, but I'm leaving it there in
doubt.
Sean Farley <sean@farley.io> [Mon, 21 Mar 2016 21:38:56 -0700] rev 1928
topicmap: whitespace
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 28 Mar 2016 00:47:14 -0700] rev 1927
topiccache: directly instantiate a topiccache object when reading
There is no need to rely on a temporary monkey patching.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 22 Mar 2016 15:29:05 -0700] rev 1926
readme: fix instruction to enable topic
We moved the source code in 85390446f8c1 but we messed up the readme update. We
are fixing it here.
Sean Farley <sean@farley.io> [Mon, 21 Mar 2016 21:30:14 -0700] rev 1925
stack: whitespace
Sean Farley <sean@farley.io> [Mon, 21 Mar 2016 21:29:35 -0700] rev 1924
stack: remove unused import
Sean Farley <sean@farley.io> [Mon, 21 Mar 2016 21:28:29 -0700] rev 1923
revset: add missing imports
Sean Farley <sean@farley.io> [Mon, 21 Mar 2016 21:28:12 -0700] rev 1922
revset: whitespace
Sean Farley <sean@farley.io> [Mon, 21 Mar 2016 21:26:45 -0700] rev 1921
discovery: whitespace
Sean Farley <sean@farley.io> [Mon, 21 Mar 2016 21:25:04 -0700] rev 1920
discovery: removed unused oldgetitem
Sean Farley <sean@farley.io> [Mon, 21 Mar 2016 21:07:41 -0700] rev 1919
setup: break long line
Sean Farley <sean@farley.io> [Sat, 19 Mar 2016 14:15:57 -0700] rev 1918
init: indent correctly
Sean Farley <sean@farley.io> [Sat, 19 Mar 2016 14:15:45 -0700] rev 1917
init: whitespace fixups
Sean Farley <sean@farley.io> [Sat, 19 Mar 2016 14:09:59 -0700] rev 1916
init: remove unused module
timeless@gmail.com [Fri, 18 Mar 2016 15:03:40 +0000] rev 1915
spelling: histedit
timeless@gmail.com [Fri, 18 Mar 2016 15:00:58 +0000] rev 1914
spelling: changeset
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 18 Mar 2016 08:14:45 -0700] rev 1913
readme: remove the part about 3.7 and hgext3rd
We are using direct path already so we don't need any magic here. The
'hgext3rd.'bit is only required (for 3.7) when the module is installed and we
rely on sys.path to find it.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 22 Mar 2016 00:19:14 -0700] rev 1912
merge with other duplicate head
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 17 Mar 2016 09:14:57 -0700] rev 1911
histedit: restrict default edited set to current topic when possible
If we have an active topic, we restrict the edit within that topic.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 17 Mar 2016 09:13:12 -0700] rev 1910
stack: add a 'stack()' revset
We give access to the list of relevant commit with a revset. Benefits over
'topic(.)' are the filtering of obsolete changeset and the reordering (to
topological as-in unstability were resolved).
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 23:37:58 +0000] rev 1909
stack: display the base of the stack
Displaying the first parent of the stack seems useful. I'm even tempted to call
it 't0' and have the topic still active when 'hg up t0' is used to move to the
base.
As a side effect we gain a way to denote that the stack is not linear. I'm not
super convinced that it is the right way to display it, but this is better than
no information.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 19:22:21 +0000] rev 1908
stack: add some default color configuration
We can make the output more insightful with some default colors, let's do it.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 19:03:32 +0000] rev 1907
stack: add basic formatter and label support
This still is not great, especially I would like '-T' to be able to control how
we display the changeset, but this is useful progress.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 18:43:23 +0000] rev 1906
stack: show the currently active changeset and unstable ones
Still super basic, but give a basic idea of the feature. We use both symbols and
explicit text because symbols are cool but text is more explicit
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 18:40:00 +0000] rev 1905
stack: add "t" prefix to index in the output
This make the existance and meaning of "t2" reference clearer.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 18:39:19 +0000] rev 1904
stack: allow to refer to changeset using "t2" form
hg up "t0" is seen as "update to the first changeset of my current topic".
Eventually we'll drop the "t2" form in favor of the planned generic indexing
operator '.{t2}'.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 15 Mar 2016 17:26:57 +0000] rev 1903
topic: don't take topic into account when pushing to non-topic repo
Previously, pushing to a non-publishing repository without topic support would
wrongfully use topic when searching for new heads.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 16 Mar 2016 12:14:20 -0700] rev 1902
destination: fix 'hg pull --rebase'
I'm not sure why sometime functions do not have func_default but this is easy
to fix. I've added a test to catch such stuffs it in the future.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 17 Mar 2016 09:12:18 -0700] rev 1901
packaging: fix setup.py and install as hgext3rd.topic
This changeset is doing two things (gasp):
- It fixes various errors in the setup.py
- It move the topic source and install into hgext3rd.topic.
This last part (code source move) use hgext3rd as namespace package to prevent
installation nightmare. This won't be officially supported until Mercurial 3.8,
but in the meantime, 3.7 user can enable it using the full package name:
[extensions]
hgext3rd.topic=
Thanks goes to Julien Cristau <julien.cristau@logilab.fr> for the initial
version of this.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 16 Mar 2016 12:14:20 -0700] rev 1900
destination: fix 'hg pull --rebase'
I'm not sure why sometime functions does not have func_default but this is easy
to fix. I've added a test to catch such stuff it in the future.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 15 Mar 2016 17:25:18 +0000] rev 1899
discovery: remove a spurious print
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 18:24:33 +0000] rev 1898
task: add index number to the output
We are doing to use these number for easy movement in later changesets. The
numbering will probably evolve over time but this is a good start.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 18:11:52 +0000] rev 1897
stack: fix printing order in case of unstability
The stack was displayed using revision number order, this give good result in
the simple case (straight stack) but give bad result when the stack is not
linear because of unstability.
We fixes it by reusing the evolution logic for sorting. As we do not live next
to evolution yet, we duplicated this logic for now.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 17:48:31 +0000] rev 1896
stack: exclude obsolete changeset from the set
We care about relevant changeset, obsolete have a new version somewhere and we
don't care about the old one in our display.
In case of unstability, the ordering used is still wrong.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 17:37:39 +0000] rev 1895
stack: add a very first version of stack display with 'hg topic --list'
This mark the first step toward a set of feature dedicated to displaying and
moving within the current stack of work. Everything is still super basic so
don't look too much at the feature.
The goals of this changeset are:
* having a flag to trigger the feature
* having a basic (imperfect selection mechanism)
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 17:09:02 +0000] rev 1894
topic: get 'Abort' from error, not 'util'
The class live in 'mercurial.error'.
Augie Fackler <raf@durin42.com> [Mon, 14 Mar 2016 21:22:56 -0400] rev 1893
Makefile: meant tests-@ not tests-tip
Pierre-Yves David <pierre-yves.david@fb.com> [Sun, 13 Mar 2016 12:29:43 +0000] rev 1892
update: change default update destination to take topic in account
When within a branch update to ngtip(branch). When within a topic update to the
top topic.
Pierre-Yves David <pierre-yves.david@fb.com> [Sun, 13 Mar 2016 13:07:54 +0000] rev 1891
rebase: test default rebase destination behavior
In future mercurial 3.8, rebase and merge share the same destination logic. So
if merge work, rebase should work as well. However, we double test it to be
sure.
Especially, in 3.7 the logic is not shared so we have to introduce an extra hack
to share it in this case.
Pierre-Yves David <pierre-yves.david@fb.com> [Sun, 13 Mar 2016 23:44:04 +0000] rev 1890
topicmap: write and read format from disc
To prevent too awful performance we allow writing and reading topicmap cache.
This is done with a lot of code duplication from core because core is not
extensible enough.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 00:15:54 +0000] rev 1889
topicmap: ensure that 'served' view is updated with topicmap
There is multiple place that explicitly update the 'served' branchmap to ensure
it stay up to date. We ensure it use the proper topicmap in this case.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 00:12:22 +0000] rev 1888
topicmap: move the monkey patching into a context manager
There is a couple of other place doing branchmap/topicmap update (of the served
set), we'll have to set the monkey patching for them.
This changeset is just doing the move to a context manager to make sure it is
correct.
Pierre-Yves David <pierre-yves.david@fb.com> [Sat, 12 Mar 2016 18:42:16 +0000] rev 1887
push: hackish handeling of new branch head from phase move
The current head checking mechanism is not expecting "head change" from phase
movement. Topic allows that, changeset with a topic moving to public can
create a new head. We introduce a hack to double check that no head were added
at the transaction level to work around this.
Pierre-Yves David <pierre-yves.david@fb.com> [Sat, 12 Mar 2016 18:19:27 +0000] rev 1886
push: allow pushing new topic to non-publishing server by default
This improves and fix the behavior change introduced by the new "topicmap".
* Topics are properly ignored when pushing to a publishing server,
* pushing new topics is allowed without --force a non-publishing server,
* Pushing extra heads on a topic requires --force.
Create of new head on a branch by phase movement is not properly detected for
now. We'll improve that part in a later changesets.
There is more awful monkey patching going on. We'll have to refactor core to get
rid of them.
Pierre-Yves David <pierre-yves.david@fb.com> [Sat, 12 Mar 2016 15:36:17 +0000] rev 1885
topic: take topic in account for all branch head computation
This changeset introduce a "topicmap" that is tracking not just the head of all
branches, but the heads of all branch+topic pair. Including the head of the part
of the branch without any topic. In practice this means that BRANCHNAME now
resolve to the tipmost part for the branch without topic and impact various
other logic like head checking during push and default destination for update and
merge (these aspect will need adjustment in later changesets).
The on-the-fly-temporary-monkey-patching process is pretty horrible, but allow
to move forward without waiting on having core patched.
We use 'branch:topic' as the branchmap key, this is a small and easy hack that
help use a lot for (future) support of heads discovery/checking and on disc
cache. I'm not sure it is worthwhile to improve this until an implementation
into core.
Note that this changeset change the branchmap in all cases, including during
exchange, see next changeset for improved behavior.
We also currently have the on-disk cache disabled because the core branchmap is
lacking phase information in its cache key. This will get done in a later
changesets
Augie Fackler <raf@durin42.com> [Mon, 14 Mar 2016 20:18:09 -0400] rev 1884
testedwith: declare compatibility with Mercurial 3.7
Augie Fackler <raf@durin42.com> [Mon, 14 Mar 2016 20:17:18 -0400] rev 1883
Makefile: update all-version-tests to explicitly test 3.7
Augie Fackler <raf@durin42.com> [Mon, 14 Mar 2016 20:13:44 -0400] rev 1882
hgignore: also ignore testtimes
Augie Fackler <raf@durin42.com> [Mon, 14 Mar 2016 20:12:39 -0400] rev 1881
killdaemons: discard now that it's unused
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 14 Mar 2016 14:38:40 +0000] rev 1880
test: drop custom run-tests.py
We should use the one provided by Mercurial core directly.
Augie Fackler <raf@durin42.com> [Mon, 14 Mar 2016 20:11:47 -0400] rev 1879
Makefile: rework running of tests
This makes running tests easier without depending on our own copy of
run-tests.py (though I'd still prefer to keep that around.)
Pierre-Yves David <pierre-yves.david@fb.com> [Sat, 12 Mar 2016 12:36:25 +0000] rev 1878
compat: adapt to change in mercurial core
The code around merge destination have been changed in core, we do some basic
adaptation to make sure we don't crash.
Further rework to adapt//take advantage of core change would probably be useful
but this is not the point of this commit.
Augie Fackler <raf@durin42.com> [Thu, 31 Dec 2015 11:23:19 -0500] rev 1877
topic: handle merge.update function signature change
I think this is backwards compatible with how it used to be called,
but I didn't worry about it too much either.
Augie Fackler <raf@durin42.com> [Fri, 11 Dec 2015 13:12:23 -0500] rev 1876
Merge.
Augie Fackler <raf@durin42.com> [Fri, 11 Dec 2015 13:09:29 -0500] rev 1875
test-topic-dest: test fixes I should have put in the previous change
I split a bigger change from marmoute that included some rebase
support that I wanted to discuss more, but I didn't correctly commit
my fixes to the tests before pushing. Oops.
Augie Fackler <raf@durin42.com> [Fri, 11 Dec 2015 12:53:20 -0500] rev 1874
topic: fix changing topics of commits that have an amend_source
Includes a test for this specific case, but we should probably spend
more time squinting at the interactions between the current topic
wrapper function and commitctx for memctx instances.
Augie Fackler <raf@durin42.com> [Fri, 11 Dec 2015 12:53:38 -0500] rev 1873
topic: remove useless call to c.parents()
Augie Fackler <raf@durin42.com> [Fri, 11 Dec 2015 12:56:23 -0500] rev 1872
topic: fix up change logic a little and add debug logging
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 21 Oct 2015 01:09:15 +0200] rev 1871
merge: use topic to pick default destination
If the topic have multiple heads, reduce that. Otherwise, pick the
branch we are on.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 21 Oct 2015 01:12:32 +0200] rev 1870
topic: introduce a 'ngtip' concept
The concept is to be massively used in naming and default destination logic.
The name is horrible so that people find a better one.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 08 Oct 2015 21:09:47 -0700] rev 1869
template: test that topic is accessible through template
This comes free with the namespace feature but it is good to have.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 23 Oct 2015 13:40:44 +0100] rev 1868
test: adapt to newer mercurial
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 08 Oct 2015 20:43:15 -0700] rev 1867
patch: import topic from patch header
If the used Mercurial supports it, we import topic from patch headers.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 08 Oct 2015 20:42:26 -0700] rev 1866
patch: add topic to exported patch
If used Mercurial supports it, we add a topic header to patches.
Augie Fackler <raf@durin42.com> [Wed, 14 Oct 2015 12:09:11 -0400] rev 1865
topic: work around stringmatcher moving during development of hg 3.6
Augie Fackler <raf@durin42.com> [Wed, 30 Sep 2015 18:06:42 -0400] rev 1864
topic: allow use of topic(.) to match the p1 topic
As far as I can tell this matches the behavior of branch(.) in core hg
in tht it matches p1's value rather than the wdir value.
Augie Fackler <raf@durin42.com> [Wed, 30 Sep 2015 18:05:27 -0400] rev 1863
topic: fix missing error import
Matt Mackall <mpm@selenic.com> [Fri, 19 Jun 2015 16:23:29 -0500] rev 1862
amend: allow clearing topics on amend
Matt Mackall <mpm@selenic.com> [Fri, 19 Jun 2015 16:16:42 -0500] rev 1861
changectx: add topic method
Matt Mackall <mpm@selenic.com> [Fri, 19 Jun 2015 16:13:16 -0500] rev 1860
topics: consistently use empty string instead of None
This agrees with repo.currenttopic which uses ''. A subsequent patch
is going to provide a context topic method that returns the empty
string.
Matt Mackall <mpm@selenic.com> [Fri, 19 Jun 2015 14:18:34 -0500] rev 1859
topics: drop debugging print in rebase
Matt Mackall <mpm@selenic.com> [Mon, 15 Jun 2015 17:29:07 -0500] rev 1858
topics: allow commits that only change topic (issue4725)
This allows amend to change topics. It also matches the behavior of branches.
Matt Mackall <mpm@selenic.com> [Mon, 15 Jun 2015 16:56:44 -0500] rev 1857
topics: add listnames hook so completion works
Augie Fackler <augie@google.com> [Thu, 18 Jun 2015 15:46:26 -0400] rev 1856
rewrite: use a lock and transaction as spotted by devel warnings
Matt Mackall <mpm@selenic.com> [Fri, 12 Jun 2015 16:49:46 -0500] rev 1855
topics: only apply topic to commits of the working copy
Matt Mackall <mpm@selenic.com> [Fri, 12 Jun 2015 16:41:10 -0500] rev 1854
rebase: teach rebase how to copy topics
Matt Mackall <mpm@selenic.com> [Fri, 12 Jun 2015 16:39:39 -0500] rev 1853
topic: wrap the underlying update function rather than the command
This more properly manages the updates done by things like rebase.
Matt Mackall <mpm@selenic.com> [Wed, 10 Jun 2015 17:52:07 -0500] rev 1852
commit: add a topic field to the in-editor commit text
Matt Mackall <mpm@selenic.com> [Wed, 10 Jun 2015 17:40:50 -0500] rev 1851
topic: only require obsolete support for --change
Matt Mackall <mpm@selenic.com> [Wed, 10 Jun 2015 17:13:15 -0500] rev 1850
commit: add a --topic flag
Matt Mackall <mpm@selenic.com> [Wed, 10 Jun 2015 16:44:49 -0500] rev 1849
topic: note when switching topics
Matt Mackall <mpm@selenic.com> [Wed, 10 Jun 2015 16:32:20 -0500] rev 1848
summary: add topic summary hook
Matt Mackall <mpm@selenic.com> [Wed, 10 Jun 2015 16:23:56 -0500] rev 1847
topics: add command summary
Matt Mackall <mpm@selenic.com> [Wed, 10 Jun 2015 16:20:05 -0500] rev 1846
docs: fix format of extension docstring
Augie Fackler <augie@google.com> [Wed, 10 Jun 2015 16:13:20 -0400] rev 1845
constants: extract key for extra into a constant
It might be prudent to prefix it, and regardless it was bugging me to
have it repeated everywhere.
Augie Fackler <augie@google.com> [Wed, 10 Jun 2015 15:03:39 -0400] rev 1844
topic: add ability to change topic of non-public changes
This is a little crude, but it gets the job done. You probably don't
want to use this without evolution for now.
Augie Fackler <augie@google.com> [Wed, 10 Jun 2015 15:26:50 -0400] rev 1843
revset: add a topic() revset for querying topics
Augie Fackler <augie@google.com> [Wed, 10 Jun 2015 15:01:36 -0400] rev 1842
topic: disallow use of topics without obsolete enabled
This is a prelude to allowing changing topics. The experience will be
disastrous without obsolete markers, so let's just preempt any
potential problems.
Augie Fackler <augie@google.com> [Wed, 10 Jun 2015 14:59:46 -0400] rev 1841
topic: use repo.set() where we need a changectx anyway
I always forget repo.set() exists and use repo.revs(). Sigh.
Augie Fackler <augie@google.com> [Wed, 10 Jun 2015 14:59:05 -0400] rev 1840
testlib: enable rebase and obsolete for easier testing
Augie Fackler <augie@google.com> [Wed, 20 May 2015 21:23:28 -0400] rev 1839
Initial dumb version of topics.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 18:21:23 +0100] rev 1838
serveronly: deduplicate code with the main evolve extension
Now that 'serveonly' is a sub module of evolve. We can access its content in
evolve. As a result we stop duplicating code all common parts are defined in the
'serveronly' module and imported by evolve when needed.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 16:12:34 +0100] rev 1837
serveronly: clean up imports
remove unused one and arrange them
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:31:28 +0100] rev 1836
compat: just use '_callcompressable'
That API is available in all version we supports.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:31:18 +0100] rev 1835
compat: drop bookmark compatibility layer
All the version we now supports have the 'new' API.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:29:36 +0100] rev 1834
compat: drop compat for older wireproto implementation
We only support Mercurial version with these attributes.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:28:54 +0100] rev 1833
compat: always use the strip revset from core
We only support versions that defines it.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:28:23 +0100] rev 1832
compat: drop support for ancestral pushop object
Pushoperation object have a 'cgresult' attribute in all the versions we support.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:27:54 +0100] rev 1831
compat: drop compatibility layer around update
We now support only versions with the new API.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:27:08 +0100] rev 1830
compat: drop compatibility layer for 'tryimportone'
Return is now homogeneous for all the version we support.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:25:35 +0100] rev 1829
compat: drop superfluous summary output
All versions we support issues this output.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:24:04 +0100] rev 1828
compat: drop compatibility layer around memctx
The version we support all have the same API now.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:22:25 +0100] rev 1827
compat: drop handling of ancestral 'helploader' caller
We only support recent only version on Mercurial now.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:22:05 +0100] rev 1826
compat: drop hack around a 'graft' signature change
We only support recent only version of Mercurial now.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:21:17 +0100] rev 1825
evolve: proactively detect bad version early
The extensions have been providing such error to the user for some time. So we
keep this explicit check (instead of some later errors).
The check is update to match out new version constraint.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 01 Nov 2016 16:21:16 +0100] rev 1824
evolve: drop support for version older than 3.8
The support for 'hgext3rd' was introduced in 3.8. Dropping support for older
version seems reasonable.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 13:27:04 +0100] rev 1823
evolve: cleanup imports
Just rearrange imports to a new/clearer style.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 17:27:44 +0100] rev 1822
merge with stable
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 17:19:31 +0100] rev 1821
merge with mercurial-3.5
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 17:17:40 +0100] rev 1820
merge with mercurial-3.6
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 17:15:21 +0100] rev 1819
merge with mercurial-3.7
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 17:11:51 +0100] rev 1818
merge with mercurial-3.8
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 17:08:14 +0100] rev 1817
merge with mercurial-3.9
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 17:04:58 +0100] rev 1816
merge with mercurial-4.0
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 17:00:17 +0100] rev 1815
merge future 5.6.1
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 17:22:21 +0100] rev 1814
Added tag 5.6.1 for changeset 70694b2621ba
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 17:21:56 +0100] rev 1813
update debian changelog
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Thu, 02 Feb 2017 16:33:17 +0100] rev 1812
evolve: extend API fix from 25254b2f8116 to another relevant case
For some reason, only part of this API change got fixes. Test did not caught
this because 'False' is a valid revision number (0) and update force did not
mind using it as an ancestors. The API changed in Mercurial 43c00ca887d1
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 01 Nov 2016 16:19:33 +0100] rev 1811
hgext3rd: drop the last remains of hgext3rd
Not that all extensions as moved, we can drop the directory.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 01 Nov 2016 16:18:21 +0100] rev 1810
hgext3rd: move 'obsolete' as 'evolve.legacy'
We move that last extension. It seems like we could use the repo upgrade
framework for this, but this is another adventure.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 01 Nov 2016 16:11:50 +0100] rev 1809
hgext3rd: move 'drophack' as 'evolve.hack.drophack'
Yet another extension migrating. Ideally we would implement stripping
obsolescence marker in code soon and be able to dispose of this extensions
directly. In the mean time this goes into the "hack" namespace.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 01 Nov 2016 16:07:28 +0100] rev 1808
hgext3rd: move 'simple4server' as 'evolve.serveronly'
We also more the server only extension into hgext3rd. We makes it a python
sub-module of evolve for two reasons:
* less polution in the hgext3rd namespace,
* this make it possible to share the code between 'evolve' and
'evolve.serveronly' instead of duplicating it.
note that we now install the extension too
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 14:36:18 +0100] rev 1807
hgext3rd: move 'directaccess' and 'inhibit' in 'evolve.hack'
We move them in the 'hgext3rd' package. In the same move we put them under the
'evolve' package for clarity. We use a sub-package 'hack' to make their status
clearer.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 28 Feb 2017 15:09:03 +0100] rev 1806
evolve: move the extensions to 'hgext3rd'
We have the 'hgext3rd' as the official place for extension for some time now.
We start the big migration. This might break some people setup but this is a
necessary step to have evolve easily available through pip.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Tue, 01 Nov 2016 05:42:50 +0100] rev 1805
extensions: drop the old 'pushexperiment' extension
This extensions predate bundle-2 and their have not been any reason to use it
for years.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 16:23:11 +0100] rev 1804
merge with stable
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 16:19:58 +0100] rev 1803
Update tag 5.6.0 for changeset e7b6e9c4a5d4
There was a small error in the README. The previous tag is fresh and the
announcement was sent yet. So I'm exceptionally overwriting the tag.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 16:19:50 +0100] rev 1802
fix release date in the Readme,
Copy paste error :-/
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 16:17:09 +0100] rev 1801
reopen the default branch
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 16:03:39 +0100] rev 1800
merge with 5.6.0
no extra changes were needed from the mercurial-3.5 branch.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:51:02 +0100] rev 1799
merge with 5.6.0
no extra changes were needed form the mercurial-3.6 branch.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:45:20 +0100] rev 1798
merge with 5.6.0
No extra changes were needed from the mercurial-3.7 branch.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:40:51 +0100] rev 1797
merge with 5.6.0
Not extra change were needed from the mercurial-3.8 branch
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:32:59 +0100] rev 1796
merge with 5.6.0
A minor one line conflict on test output were encountered.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:27:04 +0100] rev 1795
merge with 5.6.0
No extra changes needed from the 'mercurial-4.' branch.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:15:34 +0100] rev 1794
merge with future 5.6.0
There is only minor test output change, 4.0 do not have the "trouble:" wording
in there.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 16:09:40 +0100] rev 1793
Added tag 5.6.0 for changeset 99ede2d77545
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 16:05:21 +0100] rev 1792
exchange: fix compatibility layer
We forgot a return into some compatibility layer. This is now fixed.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:09:06 +0100] rev 1791
open the mercurial-3.9 compat branch
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:08:03 +0100] rev 1790
prepare release 5.6.0
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:07:30 +0100] rev 1789
debian: fix version format
There was a small error in the debian packaging
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:04:54 +0100] rev 1788
merge with default to prepare the next version
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 01 Feb 2017 15:02:59 +0100] rev 1787
merge with stable
Martin von Zweigbergk <martinvonz@google.com> [Tue, 31 Jan 2017 12:32:45 -0800] rev 1786
uncommit: don't lose copy information of remaining files (issue5403)
As reported in the issue, "hg uncommit" would lose copy information of
the files that remained in the commit. The problem was simply that the
a dict of copies was iterated as "src, dst in copies.items()" where it
should have been "dst, src ...".
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 25 Jan 2017 16:50:19 +0100] rev 1785
merge with stable
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 25 Jan 2017 16:40:45 +0100] rev 1784
fold: cleanly abort on empty fold set (issue5453)
We now handle the empty set case, cleanly aborting instead of crashing with a
traceback. The message used match the output of 'hg push' in similar situation.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Mon, 23 Jan 2017 16:09:16 +0100] rev 1783
README: update changelog
Martin von Zweigbergk <martinvonz@google.com> [Thu, 12 Jan 2017 13:47:49 -0800] rev 1782
fold: require --from flag for folding revisions to working copy
It's very easy to think that "hg fold 4::6" will fold exactly those
revisions. In reality, it will fold those *and* any revisions between
them and the working copy. To prevent users from making that mistake,
require the use of a new --from flag for folding revisions from the
given set to the working copy. With this change, I'm sure some users
will be surprised that the command can not be run without either
--from or --exact, but at least the consequences will be smaller (the
command simply aborts and the user can try again).
Martin von Zweigbergk <martinvonz@google.com> [Tue, 13 Dec 2016 10:28:09 -0800] rev 1781
fold: use 'fold', not 'touch', for transaction description
Stanislau Hlebik <stash@fb.com> [Thu, 05 Jan 2017 01:36:37 -0800] rev 1780
tests: fix tests to reflect hg core changes
In f05ede08dcf7d13794ccc9abb53877a50bf2b58b in core hg there were changes to
changeset_printer.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 Nov 2016 21:00:42 +0530] rev 1779
prune: improve error message if unstable changes are disallowed
I saw a question on stackoverflow why evolve reports something like cannot
fold chain not ending with head. Even I was confused the first time about the
behavior. The error message can be improved to avoid confusion to people who
are unaware about the config in future.
Martijn Pieters <mjpieters@fb.com> [Wed, 30 Nov 2016 11:17:55 +0000] rev 1778
wireproto: chunking and compression is forthwith to be handled by hgweb
Various functions disappeared in the process. Use the new streamres API but fall back to the old way if the keyword arguments are not accepted.
See https://www.mercurial-scm.org/repo/hg/rev/2add671bf55b
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sun, 06 Nov 2016 19:19:28 +0100] rev 1777
readme: fix the test run command
As we use the run-tests.py in Mercurial, we do not need to specify the path to a
Mercurial utility.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 02 Nov 2016 18:56:44 +0100] rev 1776
Manifest.in: exclude unshipped extensions
Many extensions life in the repository without being shipped we exclude them
from the dist tarball.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 02 Nov 2016 18:54:05 +0100] rev 1775
Manifest.in: include Manifest.in
Apparently this file should be in the tarball.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 02 Nov 2016 18:53:49 +0100] rev 1774
Manifest.in: exclude debian related file
The debian rules life in the repository for convenience, however they should not
be included in the dist tarball.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 02 Nov 2016 18:53:28 +0100] rev 1773
Manifest.in: include all script in tests
We now have a small fake editor scrip that should be in the dist tarball.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 02 Nov 2016 18:53:07 +0100] rev 1772
Manifest.in: drop tests/test-qsync.t entry
This file is now longer in the repository.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 02 Nov 2016 18:52:46 +0100] rev 1771
Manifest.in: drop the 'tests/dummyssh' entry
That file is now longer in the repository for some time.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 02 Nov 2016 18:50:54 +0100] rev 1770
Manifest.in: sort entry
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Wed, 02 Nov 2016 18:49:19 +0100] rev 1769
makefile: fix documentation
The only available rules is 'deb-prepare' we fix the documentation.
Simon Farnsworth <simonfar@fb.com> [Tue, 25 Oct 2016 05:15:52 -0700] rev 1768
tests: use curl instead of wget
curl is supplied by default on macOS 10.12, but wget isn't. As curl is easy
to install on other OSes, just switch the tests over.
For Windows systems, you can obtain cURL from
https://curl.haxx.se/download.html - for other systems, please use your
native package manager.
This undoes 4e7da688a066 and 3ffa12edc05a, as they don't make things much
simpler on Windows (you have to install extra packages either way round),
but they do make things harder on macOS (as curl is supplied by default,
whereas wget isn't).
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sun, 30 Oct 2016 23:31:31 +0100] rev 1767
merge with stable
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sun, 30 Oct 2016 23:28:34 +0100] rev 1766
Added tag 5.5.0 for changeset 727c7211c810
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sun, 30 Oct 2016 23:18:33 +0100] rev 1765
prepare release 5.5.0
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sun, 30 Oct 2016 23:16:04 +0100] rev 1764
readme: mention that the next release make use 4.0 compatible
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 29 Oct 2016 15:07:27 +0200] rev 1763
merge with latest fix
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 29 Oct 2016 15:04:23 +0200] rev 1762
merge with latest fix
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 29 Oct 2016 15:01:41 +0200] rev 1761
merge with latest fix
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 29 Oct 2016 14:55:57 +0200] rev 1760
merge with latest fix
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 29 Oct 2016 14:49:37 +0200] rev 1759
merge with latest fix
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Sat, 29 Oct 2016 14:40:47 +0200] rev 1758
merge with latest fix
Martin von Zweigbergk <martinvonz@google.com> [Fri, 28 Oct 2016 17:25:06 -0700] rev 1757
errors: add missing imports of mercurial.error
Martin von Zweigbergk <martinvonz@google.com> [Fri, 28 Oct 2016 17:15:57 -0700] rev 1756
evolve: use single quotes in usage messages
Mercurial core has moved in this direction, so let's follow.
Martin von Zweigbergk <martinvonz@google.com> [Fri, 28 Oct 2016 17:11:43 -0700] rev 1755
evolve: prefer "abort" over "abandon" in messages for consistency
Martin von Zweigbergk <martinvonz@google.com> [Fri, 28 Oct 2016 15:17:27 -0700] rev 1754
setupevolveunfinished: use "hg update -C ." to abort
I don't know what this function does, but it seems like it should
recommend the same way of aborting as other places do.
Martin von Zweigbergk <martinvonz@google.com> [Fri, 28 Oct 2016 15:04:40 -0700] rev 1753
evolve: suggest "hg update -C .", including '.', to abort evolve
The user will probably not also want to change commit when they abort
evolve, like "hg update -C" (without the '.') would do. Note that we
already do recommend aborting by using "hg update -C ." in another
place.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Fri, 28 Oct 2016 17:03:53 +0200] rev 1752
evolve: update the tested with statement
Test pass fine with 4.0-rc. By some magic, we are still compatible down to
Mercurial 3.4.
Pierre-Yves David <pierre-yves.david@ens-lyon.org> [Fri, 28 Oct 2016 17:02:56 +0200] rev 1751
merge with future 5.5
All was fine for 3.4.