Mon, 30 Dec 2019 00:43:17 +0530 test: no need to look at full log draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Mon, 30 Dec 2019 00:43:17 +0530] rev 5240
test: no need to look at full log
Sun, 29 Dec 2019 23:59:41 +0530 evolve: refactor content-divergence resolution logic draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Sun, 29 Dec 2019 23:59:41 +0530] rev 5239
evolve: refactor content-divergence resolution logic > What is the case we are looking at? This is about refactoring the part of content-div resolution logic where it decides which cset should be relocated and where. > What is a "topologicial common ancestors" vs a "greatest common ancestors"? `tca` is an ancestor which we can decide/find by looking at the at graph visually for e.g ``` c3(*) c4(*) | | c2(x) c1(x) c5 | / \ | / c0 ``` (c5 is the successor of c2 and c1) now here, `tca` of c3 and c4 is: c0 `gca` of c3 and c4 is: c5 > What is the new top-level logic/behavior that makes it better? The old code had some unnecessary edge cases just because we were using `gca`, since it can point to a revision that is not a topological ancestor. For e.g see b779b40f996e Eventually, the code around this was getting messy unnecessarily. So I looked into it and found a simple and more robust approach. And in new code, it is simple and straightforward (and easy to understand), where we handle the following 4 cases when solving content-div: 1) when both are on the same parent => (no need to do anything special, and simply proceed) 2) both are on the different parent but a) `tca` is the parent of one of them or b) there is no non-obsolete revision between `tca` and one of the divergent cset. => (relocate one to the other side and proceed) 3) both are on different parents and `tca` is not the parent of any of them and there is at least one non-obsolete cset between tca and both the divergent cset i.e (tca::div1) and (tca::div2) both the ranges have at least one non-obs revision. => (this is the case which we don't handle yet, but the solution would be to prompt the user to choose an evolve destination.) 4) both are in the parent-child relation => (both are merged and new cset will be based on the successor of `tca`) Changes in test-evolve-issue5958.t demonstrate that new code also covered case4 because in a resolution of "two divergent csets with parent-child relation" there should be one cset as a result and no orphan revs (as you can see there was an orphan before this patch).
Mon, 30 Dec 2019 00:11:00 +0530 evolve: remove duplicated code draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Mon, 30 Dec 2019 00:11:00 +0530] rev 5238
evolve: remove duplicated code See at line 500.
Mon, 25 Nov 2019 02:41:16 +0530 evolve: make necessary changes in a test to reflect a fix in next patch draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Mon, 25 Nov 2019 02:41:16 +0530] rev 5237
evolve: make necessary changes in a test to reflect a fix in next patch
Mon, 23 Dec 2019 01:03:45 +0530 evolve: add quotes around the action in msg of pre-checking draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Mon, 23 Dec 2019 01:03:45 +0530] rev 5236
evolve: add quotes around the action in msg of pre-checking
Wed, 04 Dec 2019 21:06:39 +0530 metaedit: use pre-checking before rewriting csets draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Wed, 04 Dec 2019 21:06:39 +0530] rev 5235
metaedit: use pre-checking before rewriting csets Changes in test file demonstrate the changed behaviour.
Sat, 14 Dec 2019 13:31:45 +0530 evolve: update the pre-check message for risk of orphans draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Sat, 14 Dec 2019 13:31:45 +0530] rev 5234
evolve: update the pre-check message for risk of orphans
Sun, 10 Nov 2019 16:32:34 +0530 evolve: add pre-check logic for creation of phase divergence locally draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Sun, 10 Nov 2019 16:32:34 +0530] rev 5233
evolve: add pre-check logic for creation of phase divergence locally Changes in tests reflect the added behaviour.
Sun, 10 Nov 2019 18:08:57 +0530 evolve: add test to show that user can create phase-divergence locally draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Sun, 10 Nov 2019 18:08:57 +0530] rev 5232
evolve: add test to show that user can create phase-divergence locally After resolution of phase-divergence, user can locally create phase-divergence by rewriting the old bumped (obsolete now) changeset. Next patch will be adding the pre-check logic for creation of this phase-divergence.
Mon, 04 Nov 2019 00:18:55 +0530 evolve: remove a check which is already done by rewriteutil.precheck() draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Mon, 04 Nov 2019 00:18:55 +0530] rev 5231
evolve: remove a check which is already done by rewriteutil.precheck() We have tests to check if fold is being performed on public cset. There is no changes in test files because testing that never touched the part this patch removes, and already caught in rewriteutil.precheck()
Mon, 04 Nov 2019 01:30:50 +0530 evolve: add pre-check logic for content-divergence in rewriteutil.precheck() draft
Sushil khanchi <sushilkhanchi97@gmail.com> [Mon, 04 Nov 2019 01:30:50 +0530] rev 5230
evolve: add pre-check logic for content-divergence in rewriteutil.precheck() For now, pre-check will abort if rewriting a rev create divergence (and config experimental.evolution.allowdivergence is not set to True). But this behaviour can be improved where instead of abort maybe we can confirm the user to either proceed with divergence or some other options depends on what command user is running. Changes in test file are used to overrides the pre-check for testing purpose (using experimental.evolution.allowdivergence=yes).
Thu, 26 Dec 2019 10:21:31 -0800 topic: make in-memory rebase preserve topic draft
Martin von Zweigbergk <martinvonz@google.com> [Thu, 26 Dec 2019 10:21:31 -0800] rev 5229
topic: make in-memory rebase preserve topic The override code thought that `__init__` would return the runtime instance, but it's actually the first argument to the function (the `self` argument), so the code had no effect at all before this patch. I think the bug only affected in-memory rebase because the in-working-copy rebase used the current topic, which was set correctly since 5156a67f66a6 (topics: update current topic to the topic of newly rebased commit (issue5551), 2017-06-29).
Wed, 18 Dec 2019 14:10:56 +0100 Temporary commit for time measurement of test file + pandoc draft
Boris Feld <boris.feld@octobus.net> [Wed, 18 Dec 2019 14:10:56 +0100] rev 5228
Temporary commit for time measurement of test file + pandoc
Wed, 18 Dec 2019 14:10:49 +0100 ci: Add CI job for building the documentation draft
Boris Feld <boris.feld@octobus.net> [Wed, 18 Dec 2019 14:10:49 +0100] rev 5227
ci: Add CI job for building the documentation
(0) -3000 -1000 -300 -100 -14 +14 +100 tip