timeless@mozdev.org [Wed, 09 Sep 2015 22:13:11 -0400] rev 1496
evolve: _() should not contain %
timeless@mozdev.org [Wed, 09 Sep 2015 19:43:24 -0400] rev 1495
evolve: add progress for _obsrelsethashtree
timeless@mozdev.org [Wed, 09 Sep 2015 19:43:14 -0400] rev 1494
evolve: add progress for the obsmarkers discovery parts
timeless@mozdev.org [Wed, 09 Sep 2015 19:40:54 -0400] rev 1493
test-obsolete: clarify divergence detection output order
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 17 Aug 2015 17:01:38 -0700] rev 1492
directaccesss: also look for symbol into list
revrange is now much smarted and optimise multiple simple symbol (like hash)
into an efficient '_list' call. So we need to look into these to find user
provided input too.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 12 Aug 2015 20:38:39 -0700] rev 1491
merge with stable
Durham Goode <durham@fb.com> [Wed, 12 Aug 2015 10:51:20 -0700] rev 1490
inhibit: fix inhibit working with non-inhibit repos
Inhibit was breaking when two repos were in memory, but one was not an inhibit
repo (like when doing a local pull between two repos). The fix is to add
inhibitenabled checks to all the places where inhibit does global wrapping of
commands (every code path from the extsetup wrappers).
Siddharth Agarwal <sid0@fb.com> [Wed, 12 Aug 2015 16:08:05 -0700] rev 1489
directaccess: don't try to partialmatch things that aren't hashes
Trying to partialmatch identifiers like '.' turns out to be (a) pointless and
(b) extremely slow. On a repo with a million commits, with directaccess
enabled,
hg log -r .^::.
goes from 2.1 seconds to 0.5.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Aug 2015 00:44:53 -0700] rev 1488
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Aug 2015 00:41:18 -0700] rev 1487
next: properly report no children when --evolve is used
If no aspiring children exist, 'hg next --evolve' should properly issue an error
message instead of crashing.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 10 Aug 2015 00:24:15 -0700] rev 1486
inhibit: do not search for visible obsolete changeset during stripping
Stripping use transaction in an unorthodox way. We should not run the inhibit
postclose hooks as it can lead to crash.
Laurent Charignon <lcharignon@fb.com> [Sat, 08 Aug 2015 12:42:57 -0700] rev 1485
split: handle bookmarks instead of leaving them on precursor
Before this patch we were leaving the bookmarks on the precursor of the split
instead of moving them on the tip of the split chain. We add a test to verify
the behavior.
Laurent Charignon <lcharignon@fb.com> [Sat, 08 Aug 2015 12:45:36 -0700] rev 1484
split: don't update before it is actually needed
Before this patch, we were updating the working copy parent needlessly and
before the error checking. This patch fixes the issue.
Laurent Charignon <lcharignon@fb.com> [Sat, 08 Aug 2015 12:16:55 -0700] rev 1483
split: add more output to the test
Before this patch, we were not displaying the final graph resulting from the
tests but just the obsolscencence markers. This patch adds more output to the
test to make it more descriptive.
Laurent Charignon <lcharignon@fb.com> [Sat, 08 Aug 2015 12:12:16 -0700] rev 1482
split: fix commit message numbering error in the test
Before this patch, the test was wrong and the successors of a splitted commits
all had the same commit messages. This patch makes the test right making sure
that the numbering of the split successors is accurate.
Laurent Charignon <lcharignon@fb.com> [Wed, 24 Jun 2015 16:27:36 -0700] rev 1481
evolve: handle split commit for instability
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 07 Aug 2015 13:59:19 -0700] rev 1480
merge with stable
Laurent Charignon <lcharignon@fb.com> [Fri, 07 Aug 2015 11:39:51 -0700] rev 1479
evolve: add test for instability
Laurent Charignon <lcharignon@fb.com> [Thu, 18 Jun 2015 16:48:53 -0700] rev 1478
evolve: add a command to split commits
Before this patch, to split commit one had to use prune. This patch adds a
new command called split that prompts the user interactively to split a given
changeset with record/crecord.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 03 Aug 2015 11:29:27 -0700] rev 1477
merge with stable
Matt Harbison <matt_harbison@yahoo.com> [Sat, 01 Aug 2015 22:16:26 -0400] rev 1476
test-inhibit: simplify push destinations for Windows
This was aborting because $pwd is expanding to 'C:/path/to/tests':
- pushing to file://$TESTTMP/inhibit2
- abort: hidden revision '003a4735afde'!
- (use --hidden to access hidden revisions)
+ abort: file:// URLs can only refer to localhost
Matt Harbison <matt_harbison@yahoo.com> [Sat, 01 Aug 2015 21:54:00 -0400] rev 1475
test-sharing: fix globs for Windows
Laurent Charignon <lcharignon@fb.com> [Wed, 29 Jul 2015 09:55:50 -0700] rev 1474
inhibit: don't abort when directaccess is not enabled
When directaccess is not enabled, we should just print a warning and not set up
inhibit. We don't need to abort in that case. Example: if the user is running
hg showconfig, we don't want to crash as the command is unrelated to inhibit.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 10 Jul 2015 22:58:13 +0100] rev 1473
merge with stable
Laurent Charignon <lcharignon@fb.com> [Thu, 09 Jul 2015 12:42:07 -0700] rev 1472
inhibit: add missing locking in wrapper for obsmarker creation
The develwarning for transaction without lock rightfully pointed out to this
issue. Before this patch we were not locking in the transaction for obsmarker
creation and therefore showing the warnings.
Laurent Charignon <lcharignon@fb.com> [Thu, 25 Jun 2015 13:33:50 -0700] rev 1471
evolve: (issue4386) cleanup, split, fold and bijection in `hg prune`
Before this patch, the prune command was splitting and folding implicitely
based on the number of successors and precursors. This patch makes the
two behavior explicit by requesting a flag to perform a split or a fold.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 30 Jun 2015 18:32:12 -0700] rev 1470
merge with stable
André Sintzoff <andre.sintzoff@gmail.com> [Fri, 26 Jun 2015 22:26:48 +0200] rev 1469
evolve: fix typo in fold docstring
André Sintzoff <andre.sintzoff@gmail.com> [Fri, 26 Jun 2015 22:25:57 +0200] rev 1468
evolve: remove trailing spaces
Laurent Charignon <lcharignon@fb.com> [Wed, 24 Jun 2015 16:54:23 -0700] rev 1467
evolve: dedupe divergents when running evolve --all --any or evolve --rev
Before this patch, when running evolve --all --any or evolve --rev with the
--divergent flag, we were selecting all of the divergents. After solving the
first one, its counterparts would get pruned and potentially hidden which would
crash when trying to resolve them. This patch introduces logic to dedupe the
divergents to be resolved by keeping only one per group of divergent with the
lower revision number.
Laurent Charignon <lcharignon@fb.com> [Wed, 24 Jun 2015 16:38:24 -0700] rev 1466
evolve: remove unused warning message in _solvedivergent
Before this patch, we were checking for a case where a divergent changeset could
be public and printing a warning in that case. When we compute the divergent set
in the obsolete module we explicitely look for not public() changesets.
This patch removes this unused warning.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 29 Jun 2015 02:30:27 -0700] rev 1465
compat: use svfs instead of sopener
The "new" attribute is about 2 years old so let's move on.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 26 Jun 2015 00:59:22 -0700] rev 1464
fold: avoid using x:y in the help
Suggesting "x:y" is a bad idea because x:y is a very deceptive revset.
Laurent Charignon <lcharignon@fb.com> [Thu, 25 Jun 2015 09:53:53 -0700] rev 1463
evolve: improve the help of the fold command
The help of the fold command needed a little rework. This patch makes it a
little less verbose and adds an example. It also highlights a little more the
importance of the --exact flag.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 26 Jun 2015 00:07:13 -0700] rev 1462
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 26 Jun 2015 00:05:37 -0700] rev 1461
Added tag 5.2.0 for changeset 44a9dcb3fefc
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 26 Jun 2015 00:05:25 -0700] rev 1460
merge with 3.3
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 26 Jun 2015 00:04:38 -0700] rev 1459
fix version number
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 26 Jun 2015 00:04:22 -0700] rev 1458
fix debian changelog
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 25 Jun 2015 17:46:24 -0700] rev 1457
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 25 Jun 2015 17:45:25 -0700] rev 1456
Added tag 5.2.0 for changeset 00026533ff9f
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 25 Jun 2015 17:43:10 -0700] rev 1455
merge with preparation for version 5.2.0
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 25 Jun 2015 17:42:07 -0700] rev 1454
prepare version 5.2
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 25 Jun 2015 17:38:40 -0700] rev 1453
merge with stable
(restore test for Mercurial default branch
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 25 Jun 2015 17:37:43 -0700] rev 1452
merge back with 3.3 compat branch
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 25 Jun 2015 17:22:17 -0700] rev 1451
tests: adapt the test for Mercurial 3.3
Some fix in the obsolete parent directory warning where also necessary.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 25 Jun 2015 16:55:27 -0700] rev 1450
merge with stable
Test are updated to run with current mercurial stable (3.4.1)
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 24 Jun 2015 20:06:45 -0700] rev 1449
next: add a --evolve option
When on a topological head, this option will trigger the evolution of a unstable
changeset that will result in a children of the current working copy parent.
This should ease stacked changesets workflow by allowing to stick to prev and
next to move through a stack of diff, evolving part of it on demand when needed.
In case of ambiguity, the command will ask the user to choose. We need a better
definition of "the stack of changesets I'm working on" to be able to seamlessly
handling branching.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 24 Jun 2015 19:42:01 -0700] rev 1448
next: print some message when on a head with some aspiring children
Being on a head does not necessary means that this is the end of the road. It is
likely that some changesets could be evolve as children. We detect this case and
provide a hint.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 24 Jun 2015 20:23:41 -0700] rev 1447
next: reword error output
We move to a more compact and direct phrasing. I'm not fully happy about it yet,
but this is a step forward. The listing of candidate should maybe be moved
behind a --verbose flag (and such verbose flag be suggested in the error).
G: changed tests/test-prev-next.t
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 24 Jun 2015 20:17:57 -0700] rev 1446
next: refactor the command code
We make the conditional flatter and the return more straight forward. This will
make addition of more complex cases more straightforward in future changesets.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 24 Jun 2015 21:16:57 -0700] rev 1445
next: add extensive testing to the 'next' command
We are going to introduce more complexity to it. We add the full extend of the
case we want tested to see how they evolve later.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 24 Jun 2015 19:43:35 -0700] rev 1444
readme: add an entry about the obsolete wdir parent hint
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 24 Jun 2015 16:37:02 -0700] rev 1443
evolve: add a hint when the parent working copy become obsolete
This should help people find the right commands to recover from this situation.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 18:16:21 -0700] rev 1442
evolve: better error message when command is Ambiguous
Having more data help the user.
Laurent Charignon <lcharignon@fb.com> [Wed, 20 May 2015 16:35:45 -0700] rev 1441
evolve: mechanism to load some commands selectively
This patch introduces a new config option: experimental.evolutioncommands to
load evolve's command selectively.
It is part of a sequence of patches to make evolve's command respect the value
of experimental.evolution. Once these commands are ready and actually respect
the flag, they are safe to use and can be enabled with the mechanism developed
in this patch.
Laurent Charignon <lcharignon@fb.com> [Mon, 22 Jun 2015 17:46:32 -0700] rev 1440
evolve: clarify code in _singlesuccessor
Before this patch we were not very explicit with this while condition in
_singlesuccessor. This patch makes it more legible.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:50:39 -0700] rev 1439
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:50:06 -0700] rev 1438
merge with inactive compat branch
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:49:53 -0700] rev 1437
merge with inactive compat branch
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:49:24 -0700] rev 1436
close inactive compatibility branch
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:47:47 -0700] rev 1435
close inactive compatibility branch
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:47:24 -0700] rev 1434
merge with inactive compat branch
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:47:08 -0700] rev 1433
merge with inactive compat branch
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:46:54 -0700] rev 1432
merge with inactive compat branch
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:45:55 -0700] rev 1431
close inactive compatibility branch
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:45:47 -0700] rev 1430
close inactive compatibility branch
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 16:45:22 -0700] rev 1429
close inactive compatibility branch
Laurent Charignon <lcharignon@fb.com> [Mon, 22 Jun 2015 12:44:21 -0700] rev 1428
evolve: raise MultipleSuccessorsError when computing dependency for split commits
We don't know how to handle dependency for split commits yet. When facing a
splitted commit, instead of silently adding the first successor to the
dependency list and fail later, we do nothing.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 15:26:51 -0700] rev 1427
next/prev: require --merge to move with uncommitted changes
This should previous common mistake.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 15:32:47 -0700] rev 1426
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 15:32:15 -0700] rev 1425
Added tag 5.1.5 for changeset 1377f6a7f9ec
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 15:30:35 -0700] rev 1424
prepare version 5.1.5
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 00:00:03 -0700] rev 1423
evolve: non recursive implementation for _aspiringdescendants
We switch from a N squared recursive implementation for _aspiringdescendants
to a more efficient algorithm in O(len(unstable)).
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 22 Jun 2015 21:01:30 -0700] rev 1422
evolve: distinct between '--all' and '--all --any'
Before this patch, evolve --all implied evolve --all --any. With this patch
evolve --all evolves all the aspiring descendants of the parent of the working
copy. evolve --all --any does what evolve --all did before: evolving all the
troubles in the repo.
We add anew function _aspiringdescendant for this purpose
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 23 Jun 2015 00:02:23 -0700] rev 1421
rework refactor _aspiringchildren by introducing _possibledestination
This allows us to reuse some of the logic for evolve from _aspiringchildren
for the new implementation of evolve --all.
The logic is also better as some previously selected changesets may not actually
evolve on the target, and some changesets that does not would not.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 22 Jun 2015 19:24:21 -0700] rev 1420
evolve: consider all potential candidates on bare evolve
Instead of stopping at the first resolution, we returns all matches. If there is
ambiguity, we abort.
The function itself seems fairly flawed but will do the job in simple case.
Laurent Charignon <lcharignon@fb.com> [Tue, 23 Jun 2015 13:20:00 -0700] rev 1419
evolve: fix an issue in the documentation of the evolve function
hg evolve is solving troubles that will become children of the parent of the
working copy and its descendant. This last part was omitted by mistake from
the help message before.
Laurent Charignon <lcharignon@fb.com> [Mon, 22 Jun 2015 12:41:32 -0700] rev 1418
evolve: fix error in builddependencies
When MultipleSuccessorsError was raised, we were still running the code below
to add the dependency if succ was not None from a previous iteration.
This bug was harmless because dependencies and rdependencies are sets but it
makes the code clearer this way.
Laurent Charignon <lcharignon@fb.com> [Fri, 19 Jun 2015 18:17:57 -0700] rev 1417
test-evolve-bumped: add new test case for merge
Before this patch we were not testing our warning message for bumped changesets
that are the product of a merge. This patch adds a test case for that.
Laurent Charignon <lcharignon@fb.com> [Fri, 19 Jun 2015 18:16:31 -0700] rev 1416
test-evolve-bumped: improve tests legibility
This patch introduces in test-evolve-bumped some of the test helpers that we
use in other tests to make the code more legible.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 22 Jun 2015 15:04:54 -0700] rev 1415
evolve: drop len comparison in prune and fold
Computing the length of a smartest may be significantly more expensive than
computing it length.
Pierre-Yves David <pierre-yves.david@fb.com> [Sat, 20 Jun 2015 02:04:37 -0700] rev 1414
evolve: add an help topic about evolution
The text is probably bad, but this have been laying around for quite sometime
(with Mercurial core in mind) lets move forward and add this to evolve.
Laurent Charignon <lcharignon@fb.com> [Fri, 19 Jun 2015 17:47:48 -0700] rev 1413
evolve: remove _picknexttroubled
It was not used anymore
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 17:35:29 -0700] rev 1412
evolve: warn about every skipped evolution
When we could not evolve a revision, we used to silently ignore it. We now
inform the user that we ignored something and tell him why (with more or less
informative message).
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 17:03:40 -0700] rev 1411
evolve: some style fix
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 14:26:33 -0700] rev 1410
evolve: unify revision handling and rework error message
This changesets do a massive refactoring of the way evolve select changesets to
be evolve. We now use a two stages approach:
1) read command line argument and produce a list of revision to evolve.
2) evolve all these revisions.
This allow a much cleaner, robust and extensible code. In the process the error
message issued when there is nothing to evolve have been updated to informs
about other troubles in the repository and point at useful option to solve them.
The 'update' case is handled independently at the start of the function.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 14:32:54 -0700] rev 1409
evolve: move the 'update' if '.' is obsolete earlier
A big refactoring of the computation of the revision to evolve is coming. This
case won't be handled by it, so we extract it earlier.
Laurent Charignon <lcharignon@fb.com> [Tue, 16 Jun 2015 17:56:23 -0700] rev 1408
evolve: skip unstable changesets with multiple successorssets
We were previously crashing when encountering them, but we want to be able to
solve the other solvable troubles instead of stopping right there.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 14:18:45 -0700] rev 1407
evolve: allow multiple --rev argument
This is standard behavior for Mercurial commands.
Laurent Charignon <lcharignon@fb.com> [Fri, 19 Jun 2015 16:49:59 -0700] rev 1406
test-evolve: fix tests failing on some platform
We change from echo to printf to print newlines so that evolve's tests work
cross-platforms.
Laurent Charignon <lcharignon@fb.com> [Tue, 16 Jun 2015 16:58:38 -0700] rev 1405
evolve: prevent using --rev and --any together
Before this patch it was possible to use evolve --rev --any and it meant
evolve --rev. This patch throws an error when using evolve --rev --any.
Laurent Charignon <lcharignon@fb.com> [Tue, 16 Jun 2015 15:14:37 -0700] rev 1404
evolve: add selector for trouble types
This patch adds command line flags to select the kind of troubles to solve.
Before this patch evolve was solving any kind of troubled. With this patch
evolve --all and evolve --rev can be configured to only solve only some type
of troubles (divergent, bumped or unstable). To give this choice to the
user we add three new command line flags to the evolve command: --bumped,
--divergent and --unstable.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 13:57:16 -0700] rev 1403
evolve: refresh the documentation
Multiple behavior change are coming, a perfect timing to refresh the doc before
we rework it more.
Laurent Charignon <lcharignon@fb.com> [Tue, 16 Jun 2015 15:08:44 -0700] rev 1402
evolve: check for uncommited change earlier
Before this patch we were checking for uncommited change multiple times and
quite late for uncommited change. This patch moves the check at the beginning
of the evolve method to avoid these shortcomings.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 12:39:15 -0700] rev 1401
merge with some old heads
Pierre-Yves David <pyd@fb.com> [Mon, 16 Jun 2014 14:31:49 -0700] rev 1400
merge with some older backport
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 12 Jun 2014 16:10:01 -0700] rev 1399
template: add a troubles keyword
This keyword list all evolution troubles that affect a changeset. Evolution
troubles can be "unstable", "divergent" and "bumped".
Laurent Charignon <lcharignon@fb.com> [Fri, 19 Jun 2015 11:04:18 -0700] rev 1398
evolve: make fold aware of allowunstable
Before this patch, the fold command was performing the same way regardless of
the value of experimental.evolution.
With this patch if the configuration does not allow unstability, fold won't
create instability.
Laurent Charignon <lcharignon@fb.com> [Fri, 19 Jun 2015 11:03:51 -0700] rev 1397
evolve: make prune respect allowunsable
Before this patch, the prune command was performing the same way regardless
of the value of experimental.evolution.
With this patch if the configuration does not allow unstability, prune won't
create instability.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 10:47:02 -0700] rev 1396
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 10:44:25 -0700] rev 1395
evolve: add a hint about how to abort an evolve with conflict
The whole evolve --continue is hacky, but the way to abort it have been arcane
knowledge, carried from sith lord to its apprentice for centuries. We add a hint
to help the use discover it.
One day a clean solution will come.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 00:17:34 -0700] rev 1394
merge with branch closing commit
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 00:16:56 -0700] rev 1393
close 3.1 compat branch
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 19 Jun 2015 00:15:55 -0700] rev 1392
evolve: marks the extension as tested with 4.1
Because it is.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 23:45:37 -0700] rev 1391
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 18:05:57 -0700] rev 1390
evolve: fix default value for --confirm
Before this changes, the default was yes, unlike advertised.
The test were actually catching that so I go them updated.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 18:12:24 -0700] rev 1389
prune: use the bookmark wrapper for 3.4 compatibility
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 17:57:11 -0700] rev 1388
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 17:56:02 -0700] rev 1387
evolve: update readme regarding the preview perf improvement
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 16:15:28 -0700] rev 1386
evolve: move 'allsuccessors()' to smarted usage
The "new" smarted can be significantly more efficient than the old was. We
convert our revset to take advantage of that.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 16:15:21 -0700] rev 1385
evolve: move 'successors()' to smarted usage
The "new" smarted can be significantly more efficient than the old was. We
convert our revset to take advantage of that.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 16:15:13 -0700] rev 1384
evolve: move 'allprecursors()' to smarted usage
The "new" smarted can be significantly more efficient than the old was. We
convert our revset to take advantage of that.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 16:15:00 -0700] rev 1383
evolve: move 'precursors()' to smarted usage
The "new" smarted can be significantly more efficient than the old was. We
convert our revset to take advantage of that.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 17:08:38 -0700] rev 1382
evolve: move 'suspended()' to smarted usage
The "new" smarted can be significantly more efficient than the old was. We
convert our revset to take advantage of that.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 17:08:11 -0700] rev 1381
evolve: move 'troubled()' to smarted usage
The "new" smarted can be significantly more efficient than the old was. We
convert our revset to take advantage of that.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 16:14:32 -0700] rev 1380
evolve: avoid creating changectx object in _allsuccessors
The repo lookups and object creations have a significant performance overhead.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 16:14:16 -0700] rev 1379
evolve: avoid creating changectx object in _successors
The repo lookups and object creations have a significant performance overhead.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 16:13:35 -0700] rev 1378
evolve: avoid creating changectx object in _allprecursors
The repo lookups and object creations have a significant performance overhead.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 16:13:15 -0700] rev 1377
evolve: avoid creating changectx object in _precursors
The repo lookups and object creations have a significant performance overhead.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 16:18:29 -0700] rev 1376
evolve: fix the template keyworkd decorator docstring
It was still talking about revsets.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 15:56:56 -0700] rev 1375
evolve: search divergence within all precursors
Before this patches we looking for divergence base in immediate successors only.
This was a bug leading the divergence base to be reported missing more than it
should.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 15:25:51 -0700] rev 1374
evolve: make sure we use an unfiltered repo when looking for divergence data
Let's be double sure
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 18 Jun 2015 15:25:51 -0700] rev 1373
evolve: make sure we use an unfiltered repo when looking for divergence data
Let's be double sure
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 17 Jun 2015 11:31:05 -0700] rev 1372
directaccess: remove import from the no warning list
removal of the list previously failed for some reason.
Laurent Charignon <lcharignon@fb.com> [Wed, 17 Jun 2015 10:30:07 -0700] rev 1371
directaccess: add some commands to the directaccess list
Before this patch we had a limited list of commands in the directaccess list.
This patch adds about 20 commands to that list:
- all the read-only commands in core supporting a rev as an argument
- 'outgoing': since people can use 'outgoing' to know what is going to be
pushed, the output of hg outgoing should be consistent with to the output
of hg push and must therefore disallow directaccess since hg push forbids it.
Laurent Charignon <lcharignon@fb.com> [Tue, 16 Jun 2015 14:49:28 -0700] rev 1370
evolve: move test for evolve --rev ordering in a separate file
evolve --rev reordering is a complicated enough topic to justify a separate
test.
Laurent Charignon <lcharignon@fb.com> [Tue, 16 Jun 2015 14:30:43 -0700] rev 1369
evolve: properly evolve stacked unstable with --rev
Before this patch, _singlesuccessor was not returning a revision number for
the case where the parent of the argument was not obsolete. This resulted in
bug when testing membership with the set of revisions. This patch fixes it and
adds a test.
Laurent Charignon <lcharignon@fb.com> [Tue, 16 Jun 2015 10:19:17 -0700] rev 1368
directaccess: disable directaccess for push and serve
Before this patch, push and serve were subject to directaccess. This patch
makes them throw error when trying to access hidden hashes.
Laurent Charignon <lcharignon@fb.com> [Tue, 16 Jun 2015 10:08:48 -0700] rev 1367
directaccess: change rule from opt-in to opt-out
Before this patch we would opt-in commands for direct access and the default
filter for new repository was 'visible'.
With this patch, the default filter for new repos is
'visible-directaccess-warn'. It means that by default all the commands have
directaccess with warnings.
Laurent Charignon <lcharignon@fb.com> [Tue, 16 Jun 2015 10:07:51 -0700] rev 1366
inhibit: move transaction wrapping outside of repo setup
Before this patch, transaction wrapping code was done in reposetup. It happened
to cause stackoverflows in repos with a lot of subreps.
This patch moves the wrapping to extsetup and avoids this problem.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 15 Jun 2015 17:44:12 -0700] rev 1365
tests: ignores other core output in capability testing
This will avoid breaking the test anytime core changes.
Laurent Charignon <lcharignon@fb.com> [Wed, 20 May 2015 12:46:13 -0700] rev 1364
evolve: make uncommit respect allowunsable
Before this patch, the uncommit command was performing the same way regardless
of the value of experimental.evolution.
With this patch if the configuration does not allow unstability, uncommit won't
create instability.
Laurent Charignon <lcharignon@fb.com> [Sat, 13 Jun 2015 11:14:07 -0700] rev 1363
directaccess: use cached filteredrevs
Before this patch we were calling directly repoview.computehidden(repo) to
compute the revisions visible with direct access, without going through the
caching mechanism for the filtered revisions.
There was two issues with that:
(1) Performance: We were not leverating the cached values of the 'visible' revs
(2) Stability: If there were to be a cache inconsistency with the computation of
'visible' we would crash in the branchmap consistency check partial.validfor.
Consider the scenario of rebase with bookmarks:
- when we delete a bookmark on an obsolete changeset (like what rebase
does when moving the bookmark after rebasing the changesets)
- then this changes the value returned by repoview.computehidden(repo) as
bookmarks are used as dynamic blockers in repoview.computehidden(repo)
- as of now, we don't invalidate the cache in the case of bookmark change
- if we have a cached value from before the bookmark change,
repoview.filterrevs(repo, 'visible') considers the cached value correct and
returns something different than repoview.computehidden(repo)
- in turn, if we use repoview.computehidden(repo) in directaccess, the subset
relationship is broken and the cache consistency assertion (parial.validfor)
fails if branchmap.updatecache is called in this time window
This patch leverages the caching infrastructure in place to speed up the
computation of the filteredrevs for visible-directaccess-nowarn and
visible-directaccess-warn. Incidentally it prevents the bug discussed in (2)
from crashing when running a rebase with a bookmark. Note that there still
needs to be a fix in core for the case discussed in (2).
The test for this side of the fix (not core's fix for (2) is very hard to
implement without introducing a lot of dependencies and does not belong
here. It is much easier to have the test of the fix for the scenario (2) in
core along with the fix.
Laurent Charignon <lcharignon@fb.com> [Sat, 13 Jun 2015 11:14:27 -0700] rev 1362
inhibit: improve performance of transaction wrapping
Before this patch, transaction wrapping was the most expensive part of inhibit
computation wise. This patch changes the revset that we use in the transaction
wrapping to make it ~50x faster to compute:
revset #0: obsolete() - hidden()
0) wall 0.000214 comb 0.000000 user 0.000000 sys 0.000000 (best of 11209)
vs
revset #0: (not hidden()) and obsolete()
0) wall 0.010965 comb 0.010000 user 0.010000 sys 0.000000 (best of 237)
Laurent Charignon <lcharignon@fb.com> [Thu, 04 Jun 2015 16:49:16 -0700] rev 1361
evolve: extract the code computing dependencies in a separate function
The code to compute dependencies between unstable changeset can be reused to
compute the next reveset. This patch extracts it in its own function to make
it reusable.
Laurent Charignon <lcharignon@fb.com> [Thu, 04 Jun 2015 10:01:02 -0700] rev 1360
directaccess: add mechanism to load directaccess after some other extensions
directaccess needs to load after some extensions to avoid interfering with them.
This patch adds a mechanism to specify what extension directaccess needs to load
after.
Laurent Charignon <lcharignon@fb.com> [Tue, 02 Jun 2015 15:24:12 -0700] rev 1359
evolve: add another test for evolve --rev
This patch adds one test for three conditions not covered before:
- evolve --rev on a stack with obsolete commits without successors
- evolve --rev on two sets of stacks in parallel
- evolve --rev on a set of stack partially solvable (because all of the
commits of the stack are not specified with --rev)
Laurent Charignon <lcharignon@fb.com> [Tue, 02 Jun 2015 15:23:50 -0700] rev 1358
evolve: add a more complex test for evolve --rev
The previous tests of evolve --rev would have passed with an ordering of revs
by increasing revision numbers. This patch adds a test that would fail if that
was what we were doing and therefore tests the implementation better.
Laurent Charignon <lcharignon@fb.com> [Thu, 04 Jun 2015 13:35:12 -0700] rev 1357
evolve: add ordering of the revisions for evolve --rev
When running evolve --rev we want to process the revisions in an optimal fashion
to solve the maximum amount of trouble in the minimum number of steps.
This patch adds a step to evolve --rev to order the revision before solving
the troubles. A simple test is added to cover a basic case.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 04 Jun 2015 13:26:58 -0700] rev 1356
test: adapt to change in mercurial core
Bundle2 is one by default and more capability have been added.
Laurent Charignon <lcharignon@fb.com> [Wed, 03 Jun 2015 16:01:28 -0700] rev 1355
evolve: add directaccess to the setup.py
directaccess was missing from the list so that when we were building evolve it
was not contained in the build.
Laurent Charignon <lcharignon@fb.com> [Mon, 01 Jun 2015 12:29:12 -0700] rev 1354
evolve: don't crash on singled out revisions
Before this patch, we were crashing on unsolvable revisions when using
evolve --rev. This patch removes the crash and prints a warning when we
encounter such revision.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 01 Jun 2015 10:58:50 -0700] rev 1353
test: adapt test to less frequent branch warning
The 701df761aa94 changeset in mercurial core made the branch warning issue only
for the first branch created. We adapt the tests to reflect this change.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 01 Jun 2015 10:56:49 -0700] rev 1352
tests: adapt summary output to 6084926366b9
The 'summary' commands recently gained phases related output, 6084926366b9 put
it into a "final" state. We adapt the test to this new style.
Laurent Charignon <lcharignon@fb.com> [Wed, 27 May 2015 10:23:37 -0700] rev 1351
evolve: small refactoring of the uncommit function
We introduce a new variable to simplify the implementation of hg uncommit
--interactive.
Laurent Charignon <lcharignon@fb.com> [Wed, 13 May 2015 09:46:34 -0700] rev 1350
evolve: improve error message
We add a new line and change the wording from 'revsets' to 'revisions'.
Laurent Charignon <lcharignon@fb.com> [Wed, 13 May 2015 09:43:36 -0700] rev 1349
evolve: move return statement at the right level
When no trouble was found with the --rev option, the code of the evolve
function would continue running and would solve unwanted troubles. This patch
makes sure it does not happen.
Laurent Charignon <lcharignon@fb.com> [Wed, 27 May 2015 14:00:01 -0700] rev 1348
evolve: remove extra whitespace
This patch removes a whitespace at the end of a line.
Laurent Charignon <lcharignon@fb.com> [Fri, 22 May 2015 10:38:16 -0700] rev 1347
directaccess: don't crash when evolve is not loaded
Before this patch, when evolve was not loaded direct access was crashing. This
patch catches the error and prevents the crash.
Laurent Charignon <lcharignon@fb.com> [Wed, 20 May 2015 10:58:32 -0700] rev 1346
inhbit: don't crash on commit with no changes
Before this patch inhibit would crash when running hg amend with no changes.
This patch fixes this case and adds a test to prevent regression.
Laurent Charignon <lcharignon@fb.com> [Wed, 20 May 2015 13:32:32 -0700] rev 1345
evolve: add a test for prune --keep -r . with active bookmark
We recently changed the behavior of prune to make sure that the active
bookmark stays active after prune -r .
This patch adds a test for the case of prune --keep -r . that does not
take the same code path.
Laurent Charignon <lcharignon@fb.com> [Wed, 20 May 2015 13:23:20 -0700] rev 1344
Merge with stable
Laurent Charignon <lcharignon@fb.com> [Thu, 14 May 2015 11:32:04 -0700] rev 1343
inhibit: add test to ensure that --hidden is working with inhibit
There was a concern with the transaction hook in inhibit and its potentially
devastating effect when used with --hidden. The transaction hook in inhibit
hides all the visible & obsolete commits when the transaction ends using the
visible() and the obsolete() revset.
--hidden does not change the visible() revset so it is fine. If this changes in
the future and --hidden actually ends up impacting the visible() revset, this
test will catch it and prevent inhibit from putting inhibition markers on
all of the obsolete changesets.
Laurent Charignon <lcharignon@fb.com> [Mon, 18 May 2015 17:24:38 -0700] rev 1342
prune: with active bookmark should stay active
hg prune with an active bookmark was deactivating the bookmark after the prune.
This patch makes sure that if a bookmark was active before a "prune" operation
(except prune -B) then the bookmark stays activate afterwards.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 19 May 2015 00:47:00 -0500] rev 1341
merge with stable
Augie Fackler <raf@durin42.com> [Mon, 18 May 2015 13:58:57 -0400] rev 1340
evolve: migrate off of now-dead util.any
Laurent Charignon <lcharignon@fb.com> [Thu, 14 May 2015 11:23:40 -0700] rev 1339
inhibit: create direct access extension
Since we want to use direct access without necessarily using inhibit, this
patch separates both extensions. Inhibit depends on direct access and we add
a test to check that it complains if that is not the case.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 14 May 2015 15:59:06 -0700] rev 1338
inhibit: handle inhibit marker on stripped revision
If a revision disappear from the repo, we should not crash.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 13 May 2015 17:25:15 -0700] rev 1337
update README
Laurent Charignon <lcharignon@fb.com> [Wed, 13 May 2015 09:03:11 -0700] rev 1336
evolve: don't use python sets on top of revset for evolve --rev
In --rev we were wrapping the revsets in python sets.
This is wrong as the use python sets force the wrapper revision set to be
computed earlier than it has to and have no order guarantee.
Removing this wrapping changes a test because the ordering does not appear to
be the same but the end result is the same.
Laurent Charignon <lcharignon@fb.com> [Wed, 13 May 2015 08:47:27 -0700] rev 1335
evolve: current bookmark wrongly moving during prune (issue4559)
Before this patch: prune -r <otherbookmark> also moved the current bookmark
eventhough it was not related to the pruned changes.
This patch fixes it and adds a test to catch regressions.
Laurent Charignon <lcharignon@fb.com> [Tue, 12 May 2015 13:52:29 -0700] rev 1334
inhibit: direct access with and without warning on a per command basis
We introduce a new filtername visibile-directaccess-nowarn to enable direct
access with no warning on a per command basis.
The motivation behing this change is to display warning when attempting direct
access in destructive commands.
Laurent Charignon <lcharignon@fb.com> [Tue, 12 May 2015 12:26:46 -0700] rev 1333
inhbit: make tests work with evolution.createmarkers config
Before this patch, the test for inhibit was assuming evolve fully running.
For most of the features that inhbit enables, createmarkers is sufficient.
This patch makes the test of inhibit run with the createmarkers config and
only lifts it for operations in the middle of the stack.
Laurent Charignon <lcharignon@fb.com> [Thu, 30 Apr 2015 17:37:11 -0700] rev 1332
inhibit: config to enable only direct access
Inhibit provides several features to hide instability and direct access.
We want to use direct access in evolve without hiding the instability.
This patch adds a config flag to enable only direct access in inhibit, when
this config flag is not set or set to false we enable all the features of
inhibit that don't concern direct access.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 11 May 2015 14:31:17 -0700] rev 1331
merge with stable
Ryan McElroy <rmcelroy@fb.com> [Thu, 07 May 2015 13:20:11 -0700] rev 1330
bookmarks: update to use new bookmarks api via compatibility layer
Tested against 3.4 and latest hg + upcoming bookmarks patches
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 07 May 2015 10:54:37 -0700] rev 1329
simple4server: remove buggy wrapping of pull related function
Not only the wrapping was all buggy, but simple4server is not supposed to affect
client side pull.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 06 May 2015 11:29:15 -0700] rev 1328
simple4server: update bugtracker link
We moved all evolution related bug to the core Mercurial tracker.
Laurent Charignon <lcharignon@fb.com> [Tue, 05 May 2015 14:09:09 -0700] rev 1327
evolve: rename handlenotrouble to _handlenotrouble and add doc
As suggested by Pierre-Yves on his comments on
f113636997660b807c36cf1d0a06b76d53ada1a4 we make it clear that this function
is private and explain what it does.
Laurent Charignon <lcharignon@fb.com> [Tue, 05 May 2015 18:20:40 -0700] rev 1326
evolve: improve the help message of --rev
User's are not exposed to the notion of revset, this patch makes the help
message more intelligible.
Laurent Charignon <lcharignon@fb.com> [Tue, 05 May 2015 14:25:59 -0700] rev 1325
evolve: add --rev option to the evolve command
This patch is part of a series of patches to refactor the evolve method and
make it more readable. We introduce a new --rev flag to specify a revset
where to solve the troubles instead of looking from the parent changeset.
All add a test checks that --rev works with several commits
Laurent Charignon <lcharignon@fb.com> [Tue, 05 May 2015 14:25:35 -0700] rev 1324
evolve: extract cleanup logic in the evolve function
We are going to need to reuse the cleanup logic when introducing --rev, so
we extract it in a method to avoid code duplication.
Laurent Charignon <lcharignon@fb.com> [Thu, 30 Apr 2015 14:25:37 -0700] rev 1323
evolve: simplify the evolve function
We compute the troubles once and use it in two places instead of recomputing
them just to count them.
Laurent Charignon <lcharignon@fb.com> [Tue, 05 May 2015 17:15:06 -0700] rev 1322
evolve: optimize the computation of the troubled() revset
We take the implementation from _counttroubles() and rely on the more
efficient & operation for revset instead of laying down the entire set with %ld.
Durham Goode <durham@fb.com> [Tue, 05 May 2015 13:32:01 -0700] rev 1321
inhibit: don't inhibit pinned commits during rebase
During a rebase we pin certain commits to always be visible. This caused the
inhibit extension to inhibit them when a transaction closed. Let's make inhibit
aware of such pins and not obsolete them.
Laurent Charignon <lcharignon@fb.com> [Mon, 04 May 2015 16:56:46 -0700] rev 1320
evolve: extract the logic to solve one change into a method
The goal is to later reuse this method to implement the --rev flag for
evolve that solves the troubles in a revset.
Laurent Charignon <lcharignon@fb.com> [Mon, 04 May 2015 16:56:05 -0700] rev 1319
evolve: add new variable and comment
Add comment and introduce a new variable to keep track of if the progress ui
is shown. Later on we will use this variable in the implementation of the --rev
option.
Laurent Charignon <lcharignon@fb.com> [Mon, 04 May 2015 16:09:05 -0700] rev 1318
evolve: move code to track progress and start node
This makes it easier to refactor the evolve function in this serie of patches.
Laurent Charignon <lcharignon@fb.com> [Thu, 30 Apr 2015 14:00:07 -0700] rev 1317
evolve: renaming of a variable
tro was not a really descriptive name, replacing it with nexttrouble.
Laurent Charignon <lcharignon@fb.com> [Mon, 04 May 2015 16:01:45 -0700] rev 1316
evolve: refactoring of the code displaying error when no trouble found
Before this patch, we had many return statements in the evolve function
especially in the part in charge of displaying errors when no troubles
were found. We move this code in a separate function.
Laurent Charignon <lcharignon@fb.com> [Thu, 30 Apr 2015 15:11:00 -0700] rev 1315
evolve: refactor code computing stats of obsolescence markers
Duplicated code removal by extracting a function.
Laurent Charignon <lcharignon@fb.com> [Thu, 30 Apr 2015 14:55:04 -0700] rev 1314
evolve: refactoring of code related to pushing obs markers
This removes duplicated code for the pushobsmarkers logic
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 04 May 2015 10:56:06 -0700] rev 1313
merge with stable
bunch of cleanup on stable
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 04 May 2015 10:58:14 -0700] rev 1312
update readme
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 04 May 2015 10:47:02 -0700] rev 1311
evolve: update cmddebugrecordpruneparents to the new markers creation API
The parents information are now first class citizen.
(caught by laurent using pylint)
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 04 May 2015 10:46:06 -0700] rev 1310
evolve: drop useless return
This return statement is never reached. This a actually a good new because its
variable was undefined. We remove it.
(caught by laurent using pylint)
Laurent Charignon <lcharignon@fb.com> [Thu, 30 Apr 2015 14:34:05 -0700] rev 1309
evolve: add missing import
(caught by pylint)
Laurent Charignon <lcharignon@fb.com> [Thu, 30 Apr 2015 14:47:01 -0700] rev 1308
evolve: improve transaction related code to use the lock module
Refactored some of the places where we are using locking in evolve to use
the lock module and write less code.
This should also fix a couple of bug where tr could be None at release time.
Laurent Charignon <lcharignon@fb.com> [Thu, 30 Apr 2015 14:40:36 -0700] rev 1307
evolve: remove unused variables
As suggested by pyflakes, remove 5 unused variables in the evolve module.
Laurent Charignon <lcharignon@fb.com> [Thu, 30 Apr 2015 14:30:15 -0700] rev 1306
evolve: remove unused code in _evolveany
remove some code that was doing nothing useful in _evolveany.
Laurent Charignon <lcharignon@fb.com> [Thu, 30 Apr 2015 14:22:30 -0700] rev 1305
evove: remove unused imports
Three imports where unused in the evolve module.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 29 Apr 2015 10:36:43 -0700] rev 1304
tests: ensure we keep capturing output
In 3.4, output capture with bundle2 is disabled by default on local push.
Laurent Charignon <lcharignon@fb.com> [Mon, 20 Apr 2015 13:39:18 -0700] rev 1303
inhibit: updating to a obsolete commit prints warning message
We move the inhibition marker in the same wlock than the update operation, this
clears the warning message. To make it work we display the warning message on
lock release in evolve.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 29 Apr 2015 15:12:17 -0700] rev 1302
evolve: stop conditional wrapping of _checkinvalidmarkers
We support down to Mercurial 3.3, all such version have this function.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 29 Apr 2015 15:11:52 -0700] rev 1301
evolve: stop conditional wrapping of _getbundleobsmarkerpart
We support down to Mercurial 3.3, all such version have this function.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 29 Apr 2015 15:11:07 -0700] rev 1300
evolve: stop conditional wrapping of _pushdiscoveryobsmarkers
We support down to Mercurial 3.3, all such version have this function.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 29 Apr 2015 14:49:02 -0700] rev 1299
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 29 Apr 2015 14:48:41 -0700] rev 1298
test-inhibit: test bookmark -D without prune enabled
The --config option were dropped for lack of documentation.
Laurent Charignon <lcharignon@fb.com> [Wed, 29 Apr 2015 13:01:23 -0700] rev 1297
inhibit: fix devel warning
_inhibitmarkers was taking a transaction without the proper lock. Adding the
lock removes the warnings.
Laurent Charignon <lcharignon@fb.com> [Thu, 23 Apr 2015 17:45:46 -0700] rev 1296
evolve: add -i flag to amend command
The -i flag was missing because it is not a global flag of the commit command.
We can't make it a global flag yet as it is used in many places where it would
not be appropriate so we just add it for this occurrence.
Also, we only want to add it when commit supports it (otherwise it wouldn't
work with older versions of mercurial)
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 29 Apr 2015 14:23:09 -0700] rev 1295
prune: prune fix transaction pattern
I forgot to amend.
Durham Goode <durham@fb.com> [Tue, 07 Apr 2015 14:26:03 -0700] rev 1294
prune: fix pruning w/ bookmarks and inhibit
Previously prune would create the obsolesence markers, then try to fix up the
bookmarks. With inhibit enabled, the act of closing a transaction for the
bookmark step caused it to unhide commits that were trying to be pruned.
The fix is to put the whole thing in a transaction.
Durham Goode <durham@fb.com> [Tue, 07 Apr 2015 14:08:18 -0700] rev 1293
inhibit: remove book -D dependency on cmdprune
Bookmark -D was relying on the prune command to be registered, which isn't the
case if we've disabled evolve commands. Instead, let's just hard code the
arguments.
The real fix would be to abstract away the 'I want to prune commits'
functionality in evolve to a reusable function, but this will do for now.
Durham Goode <durham@fb.com> [Mon, 06 Apr 2015 15:44:00 -0700] rev 1292
inhibit: wrap repo.commit to inhibit nodes
Rebase was failing if you rebased a commit, stripped it, then rebased it again.
This is because the node was still hidden and we needed repo.commit to uninhibit
it.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 29 Apr 2015 11:42:06 -0700] rev 1291
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 29 Apr 2015 10:36:43 -0700] rev 1290
tests: ensure we keep capturing output
In 3.4, output capture with bundle2 is disabled by default on local push.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 29 Apr 2015 10:20:04 -0700] rev 1289
update readme
Mentions greg ward work in documentation.
Greg Ward <greg@gerg.ca> [Thu, 23 Apr 2015 21:13:13 -0400] rev 1288
docs: format concepts guide better, with literal blocks
Greg Ward <greg@gerg.ca> [Thu, 23 Apr 2015 21:05:54 -0400] rev 1287
docs: fix slightly unconventional .rst markup
Greg Ward <greg@gerg.ca> [Thu, 23 Apr 2015 09:03:08 -0400] rev 1286
docs: remove unused/obsolete figures
Greg Ward <greg@gerg.ca> [Thu, 23 Apr 2015 21:08:33 -0400] rev 1285
docs: remove obsolete documentation
evolve-collaboration.rst
replaced by sharing.rst
instability.rst
introduction to the concept for Mercurial developers -- no longer
needed since most are now convinced
obs-concept.rst
largely replaced by the user guide
obs-implementation.rst
more for Mercurial developers; the source code is probably more
accurate and up-to-date
qsync.rst
the extension this referred to no longer exists
This fixes several more sphinx warnings. I've left some other old docs
around, because they still have useful content that needs to be
adapted and updated.
Greg Ward <greg@gerg.ca> [Thu, 23 Apr 2015 08:35:38 -0400] rev 1284
docs: add a table of contents
This silences many sphinx warnings about documents not included in any
toctree. Still need to delete obsolete .rst files to silence the rest
of the warnings.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 23 Apr 2015 03:18:30 +0200] rev 1283
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 23 Apr 2015 03:15:38 +0200] rev 1282
Added tag 5.1.4 for changeset 891c3ce894fa
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 23 Apr 2015 03:15:20 +0200] rev 1281
prepare release 5.1.4
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 23 Apr 2015 03:10:11 +0200] rev 1280
evolve: drop unused 'urllib' import
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 22 Apr 2015 14:30:23 +0200] rev 1279
debugobsrelsethashtree: get the command to work again
The command was untested and became broken when we introduced the new discovery
hashing.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 21 Apr 2015 16:52:08 +0200] rev 1278
getbundleobsmarker: prevent crash from filtered content (issue4616)
The discovery may discover common markers on non-served nodes. This lead to
crash when building the obsmarker part.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 21 Apr 2015 17:37:19 +0200] rev 1277
test-wireproto: add some obsmarker discovery usage.
The old code was never checking that the discovery were skipping common markers.
This is now done.
Pierre-Yves David <pierre-yves.david@fb.com> [Tue, 21 Apr 2015 17:37:59 +0200] rev 1276
test-wireprotocol: test with both bundle1 and bundle2
Bundle two is becoming the major way of exchanging things now. We duplicate the
test and ensure the default version runs using bundle2.
Julien Cristau <julien.cristau@logilab.fr> [Mon, 20 Apr 2015 14:45:50 +0200] rev 1275
Update debian packaging for 5.1.3
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 19 Nov 2014 01:04:44 +0000] rev 1274
Update debian packaging for 5.0.0
Pierre-Yves David <pierre-yves.david@fb.com> [Sat, 11 Apr 2015 10:15:16 -0400] rev 1273
create 3.1 compatibility branch
The next changeset drop 3.1 compatibility.
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 20 Apr 2015 14:21:38 +0200] rev 1272
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 20 Apr 2015 14:20:03 +0200] rev 1271
Add "documentation update" to the changelog.
Greg Ward <greg@gerg.ca> [Tue, 14 Apr 2015 12:01:05 -0400] rev 1270
docs: cover 'touch' command
Greg Ward <greg@gerg.ca> [Mon, 13 Apr 2015 15:18:01 -0400] rev 1269
docs: explain that obsolete is not hidden
Greg Ward <greg@gerg.ca> [Mon, 13 Apr 2015 15:09:55 -0400] rev 1268
docs: explain --hidden option
Also move the discussion of revision numbers up, and splice the
explanation of --hidden into it.
Greg Ward <greg@gerg.ca> [Mon, 13 Apr 2015 15:42:42 -0400] rev 1267
docs: tweak wording, punctuation for better readability
Greg Ward <greg@gerg.ca> [Mon, 13 Apr 2015 15:00:05 -0400] rev 1266
docs: flesh out unfinished bits in the intro page
Greg Ward <greg@gerg.ca> [Tue, 14 Apr 2015 12:58:13 -0400] rev 1265
docs: revive the explanation of divergent changesets in the sharing guide
Greg Ward <greg@gerg.ca> [Fri, 20 Jun 2014 08:19:04 -0400] rev 1264
docs (sharing): more scattered wording tweaks
Greg Ward <greg@gerg.ca> [Tue, 14 Apr 2015 12:55:04 -0400] rev 1263
docs: sharing guide: clarify end-game of "Example 2"
- push to dev-repo, rather than pulling into it (consistent
with how we work the multiple developer scenario later)
- explicitly demonstrate that public changesets are immutable
Greg Ward <greg@gerg.ca> [Sun, 15 Jun 2014 21:17:09 -0400] rev 1262
docs: minor tweaks to sharing guide (suggested by timeless)
Greg Ward <greg@gerg.ca> [Tue, 14 Apr 2015 12:53:12 -0400] rev 1261
docs: add code review scenario to sharing guide
The idea is to demonstrate a simpler multiple-developer situation that
does not involve getting into trouble.
The final scenario illustrates Alice and Bob getting into trouble with
bumped and divergent changesets by amending each other's history. The
required tests and text are all written, but will need to be heavily
revised because of the inserted scenario.
Greg Ward <greg@gerg.ca> [Mon, 09 Jun 2014 08:18:43 -0400] rev 1260
docs: add a bit more hierarchy to the sharing guide
Greg Ward <greg@gerg.ca> [Tue, 14 Apr 2015 12:43:37 -0400] rev 1259
docs: update sharing guide based (mostly) on marmoute's review
- don't claim certain scenarios are more/less common, just
simple/advanced
- mention code review as a multiple-developer scenario (not described
in detail yet!)
- suggest "hg config --edit --local" instead of "cat >> .hg/hgrc"
- use -q less often (and show resulting output)
- edit some section headers to be consistent with user guide
(example numbers; "amend" instead of "amending")
(These are just the small changes; big changes are yet to come.)
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 20 Apr 2015 13:52:43 +0200] rev 1258
Added tag 5.1.3 for changeset c52c15100fb2
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 20 Apr 2015 13:52:17 +0200] rev 1257
prepare version 5.1.3