directaccess: add mechanism to load directaccess after some other extensions directaccess needs to load after some extensions to avoid interfering with them. This patch adds a mechanism to specify what extension directaccess needs to load after.

evolve: add another test for evolve --rev This patch adds one test for three conditions not covered before: - evolve --rev on a stack with obsolete commits without successors - evolve --rev on two sets of stacks in parallel - evolve --rev on a set of stack partially solvable (because all of the commits of the stack are not specified with --rev)

evolve: add a more complex test for evolve --rev The previous tests of evolve --rev would have passed with an ordering of revs by increasing revision numbers. This patch adds a test that would fail if that was what we were doing and therefore tests the implementation better.

evolve: add ordering of the revisions for evolve --rev When running evolve --rev we want to process the revisions in an optimal fashion to solve the maximum amount of trouble in the minimum number of steps. This patch adds a step to evolve --rev to order the revision before solving the troubles. A simple test is added to cover a basic case.

test: adapt to change in mercurial core Bundle2 is one by default and more capability have been added.

evolve: add directaccess to the setup.py directaccess was missing from the list so that when we were building evolve it was not contained in the build.

evolve: don't crash on singled out revisions Before this patch, we were crashing on unsolvable revisions when using evolve --rev. This patch removes the crash and prints a warning when we encounter such revision.

test: adapt test to less frequent branch warning The 701df761aa94 changeset in mercurial core made the branch warning issue only for the first branch created. We adapt the tests to reflect this change.

tests: adapt summary output to 6084926366b9 The 'summary' commands recently gained phases related output, 6084926366b9 put it into a "final" state. We adapt the test to this new style.

evolve: small refactoring of the uncommit function We introduce a new variable to simplify the implementation of hg uncommit --interactive.

evolve: improve error message We add a new line and change the wording from 'revsets' to 'revisions'.

evolve: move return statement at the right level When no trouble was found with the --rev option, the code of the evolve function would continue running and would solve unwanted troubles. This patch makes sure it does not happen.

evolve: remove extra whitespace This patch removes a whitespace at the end of a line.

directaccess: don't crash when evolve is not loaded Before this patch, when evolve was not loaded direct access was crashing. This patch catches the error and prevents the crash.

inhbit: don't crash on commit with no changes Before this patch inhibit would crash when running hg amend with no changes. This patch fixes this case and adds a test to prevent regression.

evolve: add a test for prune --keep -r . with active bookmark We recently changed the behavior of prune to make sure that the active bookmark stays active after prune -r . This patch adds a test for the case of prune --keep -r . that does not take the same code path.

Merge with stable

inhibit: add test to ensure that --hidden is working with inhibit There was a concern with the transaction hook in inhibit and its potentially devastating effect when used with --hidden. The transaction hook in inhibit hides all the visible & obsolete commits when the transaction ends using the visible() and the obsolete() revset. --hidden does not change the visible() revset so it is fine. If this changes in the future and --hidden actually ends up impacting the visible() revset, this test will catch it and prevent inhibit from putting inhibition markers on all of the obsolete changesets.

prune: with active bookmark should stay active hg prune with an active bookmark was deactivating the bookmark after the prune. This patch makes sure that if a bookmark was active before a "prune" operation (except prune -B) then the bookmark stays activate afterwards.

merge with stable

evolve: migrate off of now-dead util.any

inhibit: create direct access extension Since we want to use direct access without necessarily using inhibit, this patch separates both extensions. Inhibit depends on direct access and we add a test to check that it complains if that is not the case.

inhibit: handle inhibit marker on stripped revision If a revision disappear from the repo, we should not crash.

update README

evolve: don't use python sets on top of revset for evolve --rev In --rev we were wrapping the revsets in python sets. This is wrong as the use python sets force the wrapper revision set to be computed earlier than it has to and have no order guarantee. Removing this wrapping changes a test because the ordering does not appear to be the same but the end result is the same.

evolve: current bookmark wrongly moving during prune (issue4559) Before this patch: prune -r <otherbookmark> also moved the current bookmark eventhough it was not related to the pruned changes. This patch fixes it and adds a test to catch regressions.

inhibit: direct access with and without warning on a per command basis We introduce a new filtername visibile-directaccess-nowarn to enable direct access with no warning on a per command basis. The motivation behing this change is to display warning when attempting direct access in destructive commands.

inhbit: make tests work with evolution.createmarkers config Before this patch, the test for inhibit was assuming evolve fully running. For most of the features that inhbit enables, createmarkers is sufficient. This patch makes the test of inhibit run with the createmarkers config and only lifts it for operations in the middle of the stack.

inhibit: config to enable only direct access Inhibit provides several features to hide instability and direct access. We want to use direct access in evolve without hiding the instability. This patch adds a config flag to enable only direct access in inhibit, when this config flag is not set or set to false we enable all the features of inhibit that don't concern direct access.

merge with stable

bookmarks: update to use new bookmarks api via compatibility layer Tested against 3.4 and latest hg + upcoming bookmarks patches

simple4server: remove buggy wrapping of pull related function Not only the wrapping was all buggy, but simple4server is not supposed to affect client side pull.

simple4server: update bugtracker link We moved all evolution related bug to the core Mercurial tracker.

evolve: rename handlenotrouble to _handlenotrouble and add doc As suggested by Pierre-Yves on his comments on f113636997660b807c36cf1d0a06b76d53ada1a4 we make it clear that this function is private and explain what it does.

evolve: improve the help message of --rev User's are not exposed to the notion of revset, this patch makes the help message more intelligible.

evolve: add --rev option to the evolve command This patch is part of a series of patches to refactor the evolve method and make it more readable. We introduce a new --rev flag to specify a revset where to solve the troubles instead of looking from the parent changeset. All add a test checks that --rev works with several commits

evolve: extract cleanup logic in the evolve function We are going to need to reuse the cleanup logic when introducing --rev, so we extract it in a method to avoid code duplication.

evolve: simplify the evolve function We compute the troubles once and use it in two places instead of recomputing them just to count them.

evolve: optimize the computation of the troubled() revset We take the implementation from _counttroubles() and rely on the more efficient & operation for revset instead of laying down the entire set with %ld.

inhibit: don't inhibit pinned commits during rebase During a rebase we pin certain commits to always be visible. This caused the inhibit extension to inhibit them when a transaction closed. Let's make inhibit aware of such pins and not obsolete them.

evolve: extract the logic to solve one change into a method The goal is to later reuse this method to implement the --rev flag for evolve that solves the troubles in a revset.

evolve: add new variable and comment Add comment and introduce a new variable to keep track of if the progress ui is shown. Later on we will use this variable in the implementation of the --rev option.

evolve: move code to track progress and start node This makes it easier to refactor the evolve function in this serie of patches.

evolve: renaming of a variable tro was not a really descriptive name, replacing it with nexttrouble.

evolve: refactoring of the code displaying error when no trouble found Before this patch, we had many return statements in the evolve function especially in the part in charge of displaying errors when no troubles were found. We move this code in a separate function.

evolve: refactor code computing stats of obsolescence markers Duplicated code removal by extracting a function.

evolve: refactoring of code related to pushing obs markers This removes duplicated code for the pushobsmarkers logic

merge with stable bunch of cleanup on stable

update readme

evolve: update cmddebugrecordpruneparents to the new markers creation API The parents information are now first class citizen. (caught by laurent using pylint)

evolve: drop useless return This return statement is never reached. This a actually a good new because its variable was undefined. We remove it. (caught by laurent using pylint)

evolve: add missing import (caught by pylint)

evolve: improve transaction related code to use the lock module Refactored some of the places where we are using locking in evolve to use the lock module and write less code. This should also fix a couple of bug where tr could be None at release time.

evolve: remove unused variables As suggested by pyflakes, remove 5 unused variables in the evolve module.

evolve: remove unused code in _evolveany remove some code that was doing nothing useful in _evolveany.

evove: remove unused imports Three imports where unused in the evolve module.

tests: ensure we keep capturing output In 3.4, output capture with bundle2 is disabled by default on local push.

inhibit: updating to a obsolete commit prints warning message We move the inhibition marker in the same wlock than the update operation, this clears the warning message. To make it work we display the warning message on lock release in evolve.

evolve: stop conditional wrapping of _checkinvalidmarkers We support down to Mercurial 3.3, all such version have this function.

evolve: stop conditional wrapping of _getbundleobsmarkerpart We support down to Mercurial 3.3, all such version have this function.

evolve: stop conditional wrapping of _pushdiscoveryobsmarkers We support down to Mercurial 3.3, all such version have this function.

merge with stable

test-inhibit: test bookmark -D without prune enabled The --config option were dropped for lack of documentation.

inhibit: fix devel warning _inhibitmarkers was taking a transaction without the proper lock. Adding the lock removes the warnings.

evolve: add -i flag to amend command The -i flag was missing because it is not a global flag of the commit command. We can't make it a global flag yet as it is used in many places where it would not be appropriate so we just add it for this occurrence. Also, we only want to add it when commit supports it (otherwise it wouldn't work with older versions of mercurial)

prune: prune fix transaction pattern I forgot to amend.

prune: fix pruning w/ bookmarks and inhibit Previously prune would create the obsolesence markers, then try to fix up the bookmarks. With inhibit enabled, the act of closing a transaction for the bookmark step caused it to unhide commits that were trying to be pruned. The fix is to put the whole thing in a transaction.

inhibit: remove book -D dependency on cmdprune Bookmark -D was relying on the prune command to be registered, which isn't the case if we've disabled evolve commands. Instead, let's just hard code the arguments. The real fix would be to abstract away the 'I want to prune commits' functionality in evolve to a reusable function, but this will do for now.

inhibit: wrap repo.commit to inhibit nodes Rebase was failing if you rebased a commit, stripped it, then rebased it again. This is because the node was still hidden and we needed repo.commit to uninhibit it.

merge with stable

tests: ensure we keep capturing output In 3.4, output capture with bundle2 is disabled by default on local push.

update readme Mentions greg ward work in documentation.

docs: format concepts guide better, with literal blocks

docs: fix slightly unconventional .rst markup

docs: remove unused/obsolete figures

docs: remove obsolete documentation evolve-collaboration.rst replaced by sharing.rst instability.rst introduction to the concept for Mercurial developers -- no longer needed since most are now convinced obs-concept.rst largely replaced by the user guide obs-implementation.rst more for Mercurial developers; the source code is probably more accurate and up-to-date qsync.rst the extension this referred to no longer exists This fixes several more sphinx warnings. I've left some other old docs around, because they still have useful content that needs to be adapted and updated.

docs: add a table of contents This silences many sphinx warnings about documents not included in any toctree. Still need to delete obsolete .rst files to silence the rest of the warnings.

merge with stable

Added tag 5.1.4 for changeset 891c3ce894fa

prepare release 5.1.4

evolve: drop unused 'urllib' import

debugobsrelsethashtree: get the command to work again The command was untested and became broken when we introduced the new discovery hashing.

getbundleobsmarker: prevent crash from filtered content (issue4616) The discovery may discover common markers on non-served nodes. This lead to crash when building the obsmarker part.

test-wireproto: add some obsmarker discovery usage. The old code was never checking that the discovery were skipping common markers. This is now done.

test-wireprotocol: test with both bundle1 and bundle2 Bundle two is becoming the major way of exchanging things now. We duplicate the test and ensure the default version runs using bundle2.

Update debian packaging for 5.1.3

Update debian packaging for 5.0.0

create 3.1 compatibility branch The next changeset drop 3.1 compatibility.

merge with stable

Add "documentation update" to the changelog.

docs: cover 'touch' command

docs: explain that obsolete is not hidden

docs: explain --hidden option Also move the discussion of revision numbers up, and splice the explanation of --hidden into it.

docs: tweak wording, punctuation for better readability

docs: flesh out unfinished bits in the intro page

docs: revive the explanation of divergent changesets in the sharing guide