Matt Harbison <matt_harbison@yahoo.com> [Thu, 03 Jan 2019 00:01:54 -0500] rev 4331
exthelper: update documentation with some examples for using registrar aliases
Matt Harbison <matt_harbison@yahoo.com> [Thu, 27 Dec 2018 23:46:35 -0500] rev 4330
exthelper: simplify the ability to register filesets
Same mechanism as revsets earlier in this series.
Matt Harbison <matt_harbison@yahoo.com> [Thu, 27 Dec 2018 21:55:22 -0500] rev 4329
exthelper: simplify the ability to register templates
Same mechanism as revsets earlier in this series.
Matt Harbison <matt_harbison@yahoo.com> [Thu, 27 Dec 2018 21:26:17 -0500] rev 4328
exthelper: simplify the ability to register revsets
I think this is what Yuya and Boris agreed on.[1] This happens *after* the
extsetup phase now (and after the _aftercallback notifications). But this is
trivial, mergeable between exthelper instances, and doesn't need to have the
extension name supplied when registering.
[1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2018-December/125888.html
Matt Harbison <matt_harbison@yahoo.com> [Sun, 23 Dec 2018 21:54:56 -0500] rev 4327
exthelper: support the option argument when registering a command
Largefiles uses this 5th argument with push and pull, so this will be tested in
the next commit. I assume the reason for unrolling and reforming the tuple in
each finalxxxsetup() is to validate that something proper was passed in when
registering. But it's better to explode when decorating than during the delayed
actual registration.
Matt Harbison <matt_harbison@yahoo.com> [Sat, 22 Dec 2018 22:26:36 -0500] rev 4326
exthelper: simplify configitem registration
Matt Harbison <matt_harbison@yahoo.com> [Thu, 27 Dec 2018 21:26:17 -0500] rev 4325
exthelper: avoid a [] default arg to wrapcommand()
Matt Harbison <matt_harbison@yahoo.com> [Fri, 04 Jan 2019 00:10:44 -0500] rev 4324
configitems: move the default values to the registrar decorator
The exthelper refactoring of configitems stopped registering dynamicdefault for
everything, which in turn causes a lot of warnings about mismatched defaults.
There are a few stragglers- I didn't fix topic-mode because I wasn't sure what
the default should be, and the alias for odiff was explicitly given a default
for compatibility.
Anton Shestakov <av6@dwimlabs.net> [Wed, 26 Dec 2018 22:14:23 +0800] rev 4323
topic: make revsets like foo#stack[-1] work too
We remove base commit when n < 0 because it's confusing to see base (which
technically isn't a commit inside the stack) at both 0 and -n.
Anton Shestakov <av6@dwimlabs.net> [Sun, 16 Dec 2018 11:22:04 +0800] rev 4322
topic: make revsets like 'foo#stack[0]' work
'stack' relation subscript function is another way to refer to s0, s1, etc. But
instead of aborting in many cases it will simply return an empty set.
Matt Harbison <matt_harbison@yahoo.com> [Sat, 22 Dec 2018 01:29:59 -0500] rev 4321
exthelper: remove '_' in final_xxx() function names to conform to hg style
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Dec 2018 18:38:25 +0100] rev 4320
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Dec 2018 18:36:25 +0100] rev 4319
packaging: mark as development version
This avoid confusion when installing from source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Dec 2018 18:01:30 +0100] rev 4318
Added tag 8.3.3 for changeset 97b18934d6db
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Dec 2018 17:55:25 +0100] rev 4317
packaging: prepare version 8.3.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Dec 2018 17:47:40 +0100] rev 4316
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Dec 2018 17:47:31 +0100] rev 4315
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Dec 2018 17:47:29 +0100] rev 4314
test-compat: merge mercurial-4.6 into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Dec 2018 17:47:28 +0100] rev 4313
test-compat: merge mercurial-4.7 into mercurial-4.6
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 24 Dec 2018 17:47:27 +0100] rev 4312
test-compat: merge stable into mercurial-4.7
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Dec 2018 13:14:59 +0800] rev 4311
evolve: detect unresolved conflict during evolve --continue (issue5966)
Evolve --continue was ignoring unresolved conflict, proceeding with its
operation without any check. This is now fixed.
This test case was built and formalized by Matt Harbison and Anton Shestakov.
Anton Shestakov <av6@dwimlabs.net> [Thu, 20 Dec 2018 13:59:07 +0800] rev 4310
tests: filter out uninteresting log events
Core has new ui.log() calls added (for tracking extension loading and
performance, for example), but in test-discovery-obshashrange.t it produces a
bunch of lines that are unrelated to the test. So we filter them out to not
touch test output. This is inspired by 1de3364320af in core.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Dec 2018 20:14:26 +0100] rev 4309
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Dec 2018 20:14:23 +0100] rev 4308
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Dec 2018 20:14:21 +0100] rev 4307
test-compat: merge mercurial-4.6 into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Dec 2018 20:14:20 +0100] rev 4306
test-compat: merge mercurial-4.7 into mercurial-4.6
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Dec 2018 20:14:18 +0100] rev 4305
test-compat: merge stable into mercurial-4.7
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 21 Dec 2018 19:48:01 +0100] rev 4304
linter: silence rightful complains about unused variable
Anton Shestakov <av6@dwimlabs.net> [Mon, 03 Dec 2018 14:41:03 +0800] rev 4303
topic: merge _showlasttouched logic into _listtopics
Makes --age work with --verbose.
Anton Shestakov <av6@dwimlabs.net> [Mon, 03 Dec 2018 14:15:00 +0800] rev 4302
topic: simplify _showlasttouched and _getlasttouched (and its data structure)
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 13 Dec 2018 18:57:49 +0100] rev 4301
branching: merge with stable
Boris Feld <boris.feld@octobus.net> [Thu, 13 Dec 2018 17:40:41 +0000] rev 4300
split: add a --interactive flag
While the interactive mode is useful for end-users, there are some cases where
they don't need the interactivity overhead. Moreover, this allow the split
command to be used in automated scripts.
Boris Feld <boris.feld@octobus.net> [Wed, 21 Feb 2018 14:39:48 +0100] rev 4299
split: take file patterns to limit selection on matching file patterns
When splitting a big changeset, the user often wants to extract specific files
from the changeset while leaving the others files intact.
The split command can now be called with multiple file patterns. Only files
that match one of the patterns will be shown in the interactive selection. The
user will be able to create one or more commits with those files.
When the user finishes splitting the matching files, a last commit will be
made with the remaining of the files.
Boris Feld <boris.feld@octobus.net> [Wed, 21 Feb 2018 12:39:17 +0100] rev 4298
split: only accept explicit revision through the `-r` option
We are about to introduce new non-optionnal arguments to defines files
patterns. To avoid confusion and to be closer to the standard options, only
accepts revisions with the `-r` option.
James Reynolds <james.glenn.reynolds@gmail.com> [Thu, 13 Dec 2018 17:41:06 +0100] rev 4297
issue-6028: resolves 6028 - return (False, ".") instead of (False, '')
Since 4.8, repo[] no longer takes an empty string, so we update to a valid with
similar semantic.
This value is strange and we should probably use an actual node ID here,
however, this is an independent issue.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 13 Dec 2018 17:26:26 +0100] rev 4296
branching: merge with stable
Anton Shestakov <av6@dwimlabs.net> [Wed, 12 Dec 2018 01:19:30 +0800] rev 4295
tests: add sparserevlog cap since hg now has sparse revlogs by default
CORE-TEST-OUTPUT-UPDATE: 3764330f76a6
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 12 Dec 2018 17:22:58 +0100] rev 4294
split: rework the prompt to be more standard
We dropped the initial capital and moved to a positive question.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 20 Feb 2018 09:35:16 +0100] rev 4293
split: add a option to discard remaining change during split
This is useful to drop unwanted remaining change spotted during the split.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 20 Feb 2018 09:35:16 +0100] rev 4292
split: add a way to abort a split from the prompt
This prompt is asking the user about the next step. Offering to abort there make
sense.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 20 Feb 2018 09:36:55 +0100] rev 4291
split: add a help entry to the final prompt
We are about to add more option in this prompt. Adding a way to document then
seems like a good first step.
Anton Shestakov <av6@dwimlabs.net> [Wed, 05 Dec 2018 23:15:29 +0800] rev 4290
topic: make revset argument messages be similar to such messages in core
Anton Shestakov <av6@dwimlabs.net> [Wed, 05 Dec 2018 23:13:26 +0800] rev 4289
tests: don't forget to add hg serve pid to DAEMON_PIDS in test-wireproto.t
Otherwise it leaves a process running after each run-tests.py launch.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 04 Dec 2018 13:33:51 +0100] rev 4288
test: adapt to change output change on default
We now have a `wcache` directory in `.hg`.
Anton Shestakov <av6@dwimlabs.net> [Sat, 01 Dec 2018 16:08:42 +0800] rev 4287
safeguard: don't reimplement auto-publish if it's in core (will be in 4.9)
Anton Shestakov <av6@dwimlabs.net> [Sat, 01 Dec 2018 16:07:55 +0800] rev 4286
safeguard: the new default for auto-publish is 'publish'
James Reynolds <jreynolds@backstage.com> [Fri, 21 Sep 2018 11:44:34 -0400] rev 4285
stack: add a --children flag to stack
If a commit in the stack has been merged outside the current topic, show a trailing status of (external-children)
Matt Harbison <matt_harbison@yahoo.com> [Sun, 02 Dec 2018 16:52:14 +0100] rev 4284
extensions: avoid shadowing imported module names with exthelper methods
The previous code worked, but confused pyscripter.
Matt Harbison <matt_harbison@yahoo.com> [Fri, 30 Nov 2018 22:10:39 -0500] rev 4283
extensions: add fileset support to exthelper
This will be tested by using it in lfs.
Matt Harbison <matt_harbison@yahoo.com> [Sun, 02 Dec 2018 16:48:05 +0100] rev 4282
extensions: add uipopulate() support to exthelper
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 02 Dec 2018 16:45:08 +0100] rev 4281
exthelper: clarify copyright and licence for the module
The exthelper is quite useful and Matt Harbison is looking into having it
upstreamed. We clarify the legal situation first.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 04:46:35 +0100] rev 4280
packaging: merge with version 8.3.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 04:42:45 +0100] rev 4279
packaging: mark development version
This help reduce the confusion when people install from source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 12:53:24 +0100] rev 4278
Added tag 8.3.2 for changeset 7edc5c148df0
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 04:31:03 +0100] rev 4277
packagin: prepare release 8.3.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 04:07:38 +0100] rev 4276
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 04:07:36 +0100] rev 4275
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 04:07:35 +0100] rev 4274
test-compat: merge mercurial-4.6 into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 04:07:33 +0100] rev 4273
test-compat: merge mercurial-4.7 into mercurial-4.6
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 04:07:31 +0100] rev 4272
test-compat: merge stable into mercurial-4.7
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 03:57:30 +0100] rev 4271
changelog: add information about the topic message improvements
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 27 Nov 2018 03:56:27 +0100] rev 4270
branching: merge with stable
Sushil khanchi <sushilkhanchi97@gmail.com> [Tue, 27 Nov 2018 03:46:06 +0100] rev 4269
evolve: update the abort to a ProgrammingError
This error should be a ProgrammingError and as Pierre-Yves David said
ProgrammingError type did not existed when this code was written, so lets update
this now.
Pulkit Goyal <pulkit@yandex-team.ru> [Mon, 26 Nov 2018 16:43:39 +0300] rev 4268
topics: improve the message around topic changing
The new message says 'cleared' when topic name is cleared, if we change to a new
topic name, it mentions the new topic name too.
Martijn Pieters <mj@octobus.net> [Wed, 21 Nov 2018 11:13:21 +0000] rev 4267
tests: fix for POSIX compliance
* Mac ls will exit with a different message and exit code [1], replace with
grep (which is what mercurial tests do)
* POSIX echo has no -n switch, use printf instead
Martijn Pieters <mj@octobus.net> [Wed, 21 Nov 2018 10:47:07 +0000] rev 4266
style: remove unused variables
Both `as e` references are not used and can go.
Eric Spishak-Thomas <spishak@google.com> [Tue, 20 Nov 2018 11:33:38 -0500] rev 4265
evolve: fix a documentation typo
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 02:34:39 +0000] rev 4264
compat: drop 4.3 related obsfate code
All the necessary piece are supported starting 4.4.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 02:27:13 +0000] rev 4263
compat: drop code dealing with incompatibility for --publish with 4.3
We dropped 4.3 support.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 02:25:37 +0000] rev 4262
compat: clarify when some conditional are used
The middle condition was an intermediate state that never existed into a
release. We can safely drop it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 02:20:44 +0000] rev 4261
compat: drop 4.3 "new troubles" report code
This is supported natively for Mercurial 4.4 and above.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 02:18:58 +0000] rev 4260
compat: drop 4.3 wrapping of createmarker for effect flag support
This is supported natively in 4.4 and above.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 01:52:45 +0000] rev 4259
compat: drop 4.3 monkey patch of `copies.mergecopies`
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 01:45:34 +0000] rev 4258
compat: drop 4.3 compatiblity code for `obsutil.allprecursors` function
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 01:44:28 +0000] rev 4257
compat: drop 4.3 compatiblity code for `ui.edit` method
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 01:42:50 +0000] rev 4256
compat: drop 4.3 compatiblity code for 'successors' revset
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 01:41:36 +0000] rev 4255
compat: drop 4.3 compatiblity code for 'precursors' revset
Matt Harbison <matt_harbison@yahoo.com> [Sat, 10 Nov 2018 23:54:46 -0500] rev 4254
compat: drop Mercurial 4.3 support for exthelper
The last release email noted plans to drop 4.3 and 4.4 support in the next
feature release. I'd like to move this code into core, and dropping this should
allow the class to be copied in unmodified.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Nov 2018 01:49:34 +0000] rev 4253
compat: update metadata about minimum ag version
Sushil khanchi <sushilkhanchi97@gmail.com> [Tue, 06 Nov 2018 10:41:50 +0530] rev 4252
next: solve the issue of `next` get confused by split
This patch solve a problem of next command which get confused by split.
Let me describe how it was getting confused:
Initial state of repo:
A---B---C
After splitting B to (B1,B2):
@
A---B1---B2
\
---B---C
X *
(note: C is orphan; checkedout to B1)
Lets make an amend on B1:
@
B1'
/
A---B1---B2
\ X *
\
---B---C
X *
Now, if run `hg next` (--evolve is True by default now):
$ it would give you choice to choose from B2 and C thinking that C could also
be a possbile children for B1, instead of stablizing B2 on B1.
I fixed this problem by filtering those aspiring children which can be
stablized on one of the aspiring children itself.
Changes made in test-prev-next.t shows the changed expected behaviour.
Sushil khanchi <sushilkhanchi97@gmail.com> [Tue, 06 Nov 2018 15:10:56 +0530] rev 4251
next: add test which shows that `next` get confused by split
Sushil khanchi <sushilkhanchi97@gmail.com> [Wed, 31 Oct 2018 14:08:56 +0530] rev 4250
cleanup: avoid a Yoda condition
Sushil khanchi <sushilkhanchi97@gmail.com> [Wed, 31 Oct 2018 14:06:17 +0530] rev 4249
evolve: modify and move the comment to appropriate position
Sushil khanchi <sushilkhanchi97@gmail.com> [Wed, 31 Oct 2018 14:01:58 +0530] rev 4248
next: update the command description
Now, if necessary next command evolve the next child revision
by defualt. You don't need to pass the --evolve flag.
Sushil khanchi <sushilkhanchi97@gmail.com> [Sat, 10 Nov 2018 15:50:05 +0100] rev 4247
next: make next command --evolve by default
Before this patch, if we need to evolve to update to the next child,
we were suggesting the user to use --evolve flag. This patch make some
changes to evolve by default in that conditions.
After making next command to evolve by default we have to consider
the following points:
1) If we don't need to evolve while updating to the next child:
a) And if wdir is dirty, we suggest to use --merge flag
b) if wdir is clean, we simply update to next child (if ambiguous,
prompt the user to select one)
2) If we need to evolve:
a) when wdir is dirty, we suggest the user to use `hg shelve` first,
to make wdir clean. As we don't support --merge while evovling.
b) when wdir is clean, we evolve the next cset.
Changes made in test-prev-next.t reflect the changed behaviour.
Anton Shestakov <av6@dwimlabs.net> [Mon, 05 Nov 2018 19:56:33 +0800] rev 4246
safeguard: allow push to succeed (and without warning) with --publish
Anton Shestakov <av6@dwimlabs.net> [Sun, 04 Nov 2018 22:06:23 +0800] rev 4245
topic: only add --publish flag to push if it's not already there
Anton Shestakov <av6@dwimlabs.net> [Mon, 05 Nov 2018 16:04:01 +0800] rev 4244
safeguard: check auto-publish value before sending listkeys command
Always sending listkeys command is just wasteful, let's first make sure users
even care about auto-publish behavior.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Nov 2018 17:54:28 +0100] rev 4243
style: silence another flak8 warning
Default should be green now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Nov 2018 16:11:19 +0100] rev 4242
oops: backed out changeset df22f010cf24 pushed by error
The changeset still fails some test
Sushil khanchi <sushilkhanchi97@gmail.com> [Sat, 10 Nov 2018 15:50:05 +0100] rev 4241
next: make next command --evolve by default
Before this patch, if we need to evolve to update to the next child,
we were suggesting the user to use --evolve flag. This patch make some
changes to evolve by default in that conditions.
After making next command to evolve by default we have to consider
the following points:
1) If we don't need to evolve while updating to the next child:
a) And if wdir is dirty, we suggest to use --merge flag
b) if wdir is clean, we simply update to next child (if ambiguous,
prompt the user to select one)
2) If we need to evolve:
a) when wdir is dirty, we suggest the user to use `hg shelve` first,
to make wdir clean. As we don't support --merge while evovling.
b) when wdir is clean, we evolve the next cset.
Changes made in test-prev-next.t reflect the changed behaviour.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Nov 2018 16:05:34 +0100] rev 4240
next: improve the message for dirty working copy with --evolve
This will be important soon when --evolve will be the default.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Nov 2018 16:01:31 +0100] rev 4239
next: use the `hint` argument of bail if changed
The argument is availabel since Mercurial 4.1. So let's use it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Nov 2018 15:59:16 +0100] rev 4238
prev: use the `hint` argument of bail if changed
The argument is availabel since Mercurial 4.1. So let's use it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Nov 2018 15:28:44 +0100] rev 4237
next: explicitly specify --no-evolve in the tests
The default value for this flag is about to switch.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Nov 2018 15:47:46 +0100] rev 4236
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Nov 2018 15:37:22 +0100] rev 4235
style: fix various flake8 warning
Sushil khanchi <sushilkhanchi97@gmail.com> [Sat, 10 Nov 2018 15:30:10 +0100] rev 4234
next: set if we need to evolve or not; also move logic to appropriate pos
set the value `needevolve` and also move the logic to find aspiringchildren
to appropriate position i.e before we suggest user to use other flags like
--merge.
Sushil khanchi <sushilkhanchi97@gmail.com> [Tue, 06 Nov 2018 11:22:39 +0530] rev 4233
next: move some code to prepare for `next --evolve` by default
Moved some values before the block where we suggest the user to use
--merge flag. As we would need these values to find if we need to evolve
or not before we can suggest user to use `--merge` flag.
We will suggest user to use `--merge` flag only when we don't need to
evolve. Because currently we don't support both --evolve(going to be True
by default) and --merge at the same time.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 10 Nov 2018 00:55:34 +0100] rev 4232
branching: merge with stable
Sushil khanchi <sushilkhanchi97@gmail.com> [Tue, 06 Nov 2018 15:53:18 +0530] rev 4231
topic: improve UX by using pager only when we should
Before this patch we were using pager in every case of topic command,
either it is setting up a new topic or clearing the active topic.
After this patch it will not use pager in following commands:
$ hg topic [TOPIC] -r [rev]
$ hg topic --clear
Sushil khanchi <sushilkhanchi97@gmail.com> [Tue, 06 Nov 2018 10:43:35 +0530] rev 4230
evolvecmd: _possibledestination() skip visiting empty parent
I see that even in the case when "parent == -1" we are visiting
that also and find succsets for that and in last -1 is being
added in the set of possible destination. Why not skip that?
Sushil khanchi <sushilkhanchi97@gmail.com> [Sat, 03 Nov 2018 12:21:19 +0530] rev 4229
pick: `hg help` was not showing the full cmd desc of `pick`
after running command `hg help` it was not including the second line
of command description. I guess it picks the firstline only. So I moved
that part in first line of cmd description.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 09 Nov 2018 20:19:01 +0100] rev 4228
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 09 Nov 2018 20:18:59 +0100] rev 4227
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 09 Nov 2018 20:18:58 +0100] rev 4226
test-compat: merge mercurial-4.6 into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 09 Nov 2018 20:18:57 +0100] rev 4225
test-compat: merge mercurial-4.7 into mercurial-4.6
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 09 Nov 2018 20:18:55 +0100] rev 4224
test-compat: merge stable into mercurial-4.7
Boris Feld <boris.feld@octobus.net> [Wed, 07 Nov 2018 19:35:48 +0100] rev 4223
compat: fix fixedcopytracing compatibility with mercurial 4.8 and narrow
Mercurial 4.8 version of _fullcopytracing includes some new narrow code. As
https://phab.mercurial-scm.org/D3896 has not yet landed, update
fixedcopytracing behind a version detection condition. This was spotted by
Augie Fackler.
Pulkit Goyal <pulkit@yandex-team.ru> [Thu, 01 Nov 2018 21:33:15 +0300] rev 4222
utility: don't translate commit messages in revselection prompt (issue6016)
Commit messages should not be translated and should be shown the same. I am not
sure if I can add a test for this by creating a commit with non-ascii character
in commit message.
Sushil khanchi <sushilkhanchi97@gmail.com> [Fri, 26 Oct 2018 12:54:40 +0530] rev 4221
evolve: use stack template in --continue case also
We use stack indexes (s#) in evolve msging when revs being evolved are
in active topic. Before this patch we are not covering the --continue case.
So this patch cover the same and use the stack indexes s# even when we
continue an interrupted evolve.
In this patch I used the same concept (to check if we should use s#)
as we are using in cases other than `--continue`. Thanks to PYD for
refactoring those lines.
Changes in tests also reflects the expected behaviour.
Sushil khanchi <sushilkhanchi97@gmail.com> [Wed, 24 Oct 2018 19:38:02 +0530] rev 4220
evolve: add test showing currently stackalias fails in --continue case
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 Oct 2018 18:51:55 +0200] rev 4219
branching; merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 Oct 2018 18:50:42 +0200] rev 4218
packaging: mark version as devel version
This avoid confusion from people installing from source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 Oct 2018 18:44:07 +0200] rev 4217
Added tag 8.3.1 for changeset b90422a11a88
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 Oct 2018 18:42:49 +0200] rev 4216
packaging: prepare version 8.3.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 Oct 2018 18:32:54 +0200] rev 4215
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 Oct 2018 18:32:52 +0200] rev 4214
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 Oct 2018 18:32:51 +0200] rev 4213
test-compat: merge mercurial-4.6 into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 25 Oct 2018 18:32:50 +0200] rev 4212
test-compat: merge mercurial-4.7 into mercurial-4.6