obslog: fix --patch with --no-graph options The repo given to _debughistorydisplaymarker which computes the diff was filtered when graph mode is disabled.

commands: upgrade pdiff and pstatus to full commands Doing so make them appears in the documentation, improving their discoverability.

gup/gdown: properly mark these commands as deprecated They are no longer displayed in the documentation.

Backed out changeset 1b4c92621e23 This got published by mistake.

doc: integrate graphviz graphs in tutorials Use the mercurial-graphviz extension (https://bitbucket.org/octobus/mercurial_graphviz) in tutorials in order to have some dot graphs in the tutorials .t files. In order to run the tests, export the GRAPHVIZ_EXTENSION variable which points to your copy of the extension. Please be aware that pygraphviz should be installed in your environment. That should be sufficient for generating dot graphs in text format. Then generate the doc as usual, the sphinx-graphviz extension (http://www .sphinx-doc.org/en/stable/ext/graphviz.html) has been added and it should handle the generation of the graphs. Please be aware that you need the dot binary installed in your system. Please refer to the extension documentation for more configuration.

amend: lift the --interactive constraint on `--extract` The uncommit logic now supports interactive selection.

readme: mention the topic output cleanup

readme: mention the new --interactive mode for uncommit

uncommit: minor comment cleanup in the test Fix some of the sectionning and fix on comments.

uncommit: small cleanup of the interactive test setup

tests: add tests for interactively uncommitting by mentioning files

uncommit: fix the dirstate handling in `uncommit -i` This patch fixes the dirstate handling after `hg uncommit --interactive`. This patch is bit verbose about the logic and efforts are not put to plug the logic into existing logic as it's easier to understand like this. Plugging this into non-interactive logic deserves a separate patch.

uncommit: pre-indent a block in if-True The block will be moved in if-else in next patch.

uncommit: add an interactive option to uncommit This patchs adds an interactive flag to uncommit command which lets you choose hunks interactively. The implementation is as follows: 1) prompt user to select hunks to uncommit interactively 2) make a temporary commit of the hunks user selected 3) calculate the diff of temporary commit and changeset to be uncommitted 4) commit that diff which results in the changeset which should be there after uncommiting 5) create obsmarkers as required, phases and bookmarks handling 6) reroute the working directory

uncommit: pre-indent a block in if-True for the next patch

topic: provide more information when behind count cannot be computed The behind count has been confusing for various user and the associated error message is even worth. We try to clarify it to see if that helps.

topic: show the t0 even if topic is not yet touched

topics: improve the description if topic is not touched Instead of an empty stack in `hg stack` when topic does not contain any changeset, we show `not yet touched`.

topics: show working directory branch when topic is empty

topics: add tests for cases when a topic is empty

readme: mention compatibility with future 4.4

topic: update the message used with --age for empty topic This clarify things when a topic got emptied by publishing.

sharing: edit pass

user-guide: edit pass

topic: stabilise the output of --age when date ties We just needed to introduce sort to stabilize the output order.

tests: update after removing of redundant amend commit Following e8a7c1a0565a, temporary amend commits has been removed impacting all revision numbers in tests including amend operations. Update tests case to use description or hashes when possible and update revisions number when not.

topic: setup 'topic' value for working ctx The way amend work in core change in e8a7c1a0565a. The intermediate commit disappear and we can no longer rely on it to carry the topic value to amend. To fix this, we ensure the current topic value can be retrieved through the `workingctx.extra()` value. Since there is no way to carry a "missing" key information in a way that survives and "dict.update" call. We also has to introduce hacking behavior about a special empty value for topic.

tests: abstract version number for test-topic-stack.t Using explicite version number always bring trouble, this is why we have unique description that can select changesets.

evolve: use registrar.templatekeyword to register template keyword functions Now, using registrar.templatekeyword of Mercurial directly in evolve extension should be safe enough. because it has been available since Mercurial 3.8, and minimum Mercurial version for evolve extension is 3.8, too. BTW, this also fixes an issue of "hg help templates" output that template keywords "precursors" and "successors" are not displayed as same as others, because they do not have ":KEYWORD:" prefix in their docstring.

evolve: use registrar.revsetpredicate to register revset predicate functions Now, using registrar.revsetpredicate of Mercurial directly in evolve extension should be safe enough. because it has been available since Mercurial 3.8, and minimum Mercurial version for evolve extension is 3.8, too.

topic: use registrar.revsetpredicate to register revset predicate functions Now, using registrar.revsetpredicate of Mercurial directly in topic extension should be safe enough. because it has been available since Mercurial 3.8, and minimum Mercurial version for topic extension is 4.0. This patch also removes modsetup() in topic/revset.py, because it is useless. BTW, this patch fixes an issue of "hg help revsets" output that custom revset predicates are not displayed as same as others, because they are not "inline literal" in reST syntax (``NAME``).

doc: make paragraphs before example code end with "::" for reST syntax This prevents lines in an example code from being treated as a part of normal paragraph. For issue example, lines are folded into one paragraph.

topic: centralize compatibility logic between hg versions into compat module This patch can delay loading obsutil and obsolete modules until they are actually used at "hg topics" or so, if demandimport of Mercurial is enabled.

readme: mention the improvement to stack in the readme

test: issue a clarifying graph print in tests/test-stack-branch.t

stack: properly order stack when gaps existing inside it We transitively search for the next "stack" ancestors, of changeset in the stack not based on other revision of the stack. This should help having a consistent display when topic are interleaved.

stack: display both parent with displaying merge This will help understanding merge in the stack. More test involving merge are adding in the next changeset.

tests: add tests for showing stack when merge is involved This patch adds tests of showing stack when merges are involved. This will help us in changing the behaviour and realising that in later patches.

stack: move data computation on the object We gather multiple data about the stack on the object. Let us move this on the object and keep it cached there.

stack: replace 'getstack' with direct call to 'stack' The dedicated function do not add any value. We can update all the callers.

stack: introduce a rich stack object The logic around stack object become more and more complex. We great and object to gather and abstract it.

tests: add tests for `hg stack` showing surprising behavior with gaps The test will help us to analyse in next commit if the things are fixed or not.

topic: check availability of obsutil.getmarkers() for portability Before this patch, topic extension causes unintentional failure with Mercurial earlier than 4.3, because obsutil.getmarkers() has been available since Mercurial 4.3 (tests for topic on mercurial-4.* branches fail, too). This breaks "minimumhgversion = '4.0'" declaration of topic extension. This patch fixes this issue in a straightforward way for simplicity on stable branch. I'm planning to centralize such portability logic in topic extension into topic/compat.py or so on default branch for efficiency at runtime, like as evolve/compat.py.

tests: add more explicit test about empty topic from publishing

convertbookmark: advertise the new command in the readme The command is in a good enough shape now.

convertbookmark: properly convert stacked bookmarks We ignores pure descendant when looking for revision to convert. This adds support for cases were a linear stack contains multiple bookmark (or un-bookmarked descendants exists). In this case, some changeset are left orphan, but we'll consider the issue as minor for now.

convertbookmark: perform all actions at the end This will make the whole operation more deterministic and robust.

converbookmark: split target computation from actual update This will allow for further refactoring helping consistency.

convertbookmark: extract the revset into a module level constant This will make it easier to read and modify the query.

convertbookmark: properly exclude public changeset Public changeset are immutable and cannot have a topic anyway.

test: add a new root changeset to all debugconvertbookmark test case We'll make this root changeset public to check the debugconvertbookmark logic in that regards. It is added in its own changeset since it massively impact all output.

tests: import section in 'test-topic-debugcb.t' We now have two levels of titles to clarify some aspect of the tests.

test: avoid using debugdrawdag in 'test-topic-debugcb.t' The 'debugdrawdag' utility adds local tags that prevent hidden changeset to get hidden. We will do without that extension for now.

tests: add more tests for debugconvertbookmark

convertbookmark: add logic to skip revisions with multiple bookmarks When a user tries to converts a bookmark to topic which is on a changeset with more bookmarks we skip that.

topics: add a new debugconvertbookmark command to convert bookmarks to topics This new command, aliased to debugcb converts bookmarks to topics. This command either accept name of a bookmark using flag '-b' or '--all'. If a bookmark is passed using '-b', the whole stack defined by that bookmark is converted to topics. If '--all' is passed, the above thing is repeated for every bookmark in the repository. If the revset which we are using unable to decides revisions of the stack and return an expty set, in that cases we are not deleting the bookmark as we are not writing any topics of the same name as that of bookmark. Also currently if a changeset has two bookmarks, than there is buggy behaviour. So these are known lackings in the current implementation which will be fixed in upcoming patches. This also adds tests for the same.

topic: support --rev argument and properly process then as user input Revisions inputed by the users should be processed using `scmutil.revrange`. This will take alias into account and allow extensions to monitor the user inputs. As a side effect, the '_changetopics' function takes revisions as argument. make the API clearer.

topic: move a status message in the right scope The finally get runs on failure so we should not advertise rewrite topic in the case. In addition the 'rewrote' variable can be undefined in the finally.

obsfate: use effect flag information for computing a better verb

compat: make it more clear that evolve need Mercurial >= minversion The message is more clear when mercurial isn't installed at all.

doc: record all the missings and strange bit we know We know the doc is not as fresh as it could be. We make sure the reader is aware too.

directaccess: fix with tree without order 1b28525e6698 removes order from tree, changing the indexes in gethashsymbols. Fix that

compat: adapt to test output changes different access pattern in 4.4 means different results. Make evolve works with mercurial core 72b5f4d53c58

compat: adapt to rebase change in coming 4.4 Make evolve works with mercurial core 72b5f4d53c58

topics: import lock as lockmods We'll need a 'lock' variable in the next changeset. we move the module out of the way ahead of time for clarity.

topics: make sure we have some restrictions on topic names This patch makes sure we don't allow topic names with just whitespaces, and other checks which we do for a bookmark.

topic: add test showing no restrictions on topic names Currently we don't have any restrictions on topic names and each of the topic name works. We want them to not work as some of them are used internally and only integers can be rev numbers too.

index: edit pass by native english speaker

topic: reword and simplify explanation of "behind"

topic: tutorial grammar fixes

doc-front-page: link to the changeset evolution section in the document The section is unlikely to be perfect, but at least it exists.

doc-front-page: use a clearer statement about the experimental status This text comes form the Mercurial wiki.

doc-front-pagE: add a paragraph about "why the extension" Let us clarify why there is an extension in the first place.

doc-front-page: expand the paragraph about changeset evolution We clarify the part of the explanation about the changeset evolution concept.

doc-front-page: rename the "next step" section This are pointer to relevant section in the doc. It is a bit double usage with the table of content. We at least clarify the title.

doc-front-page: mention that "Changeset Evolution" is a specific concept It will get it own paragraph soon.

doc-front-page: include the index in the TOC This will help important content to stand forward.

doc-front-page: add a title to the part about the extension We'll rework this section more in depth, but I would like it to have a title first to have it show up in the table of content.

doc-front-page: add a feature summary at the beginning of the page

doc-front-page: mention the mailing list in the documentation It is an important tool to keep people up to date.

doc-front-page: move installation instruction earliero This is important for user.

doc-front-page: move introduction before the table of content This should make a friendlier landing.

doc: simplify the reference to in-core features This should do the whole thing lighter.

doc: be less dramatic about changeset immutability Quoting Phillipe: "This is not a Tolkien Novel".

doc: clarify the introduction sentence

topics: allow use a --current when setting a topic This patch allow to use the current flag which can be used by user set existing revs to the current topic.

topic: make --clear + topicname invalid The two flags are mutually exclusive.

topics: add a current flag to display current topic This patch adds a current flag which can be used by user to display the current topic.

topics: add a missing trailing comma on list of flag This will make the next changeset easier to read.

doc: let mercurial find where evolve is installed

doc: use pip to install evolve

doc: reword "target repository" to "remote repository"

doc: typo fixes

doc: use "hidden" instead of "invisible"

tests: add whitespaces in test-topic.t to make it more readable

evolve: undo change from "divergent" to "phasedivergent" for --divergent Looks like an accidental update in feaa52680682 (log: bumped was renamed into phasedivergent, 2017-08-10).