Pulkit Goyal <7895pulkit@gmail.com> [Fri, 08 Jun 2018 22:52:51 +0530] rev 3816
test-compat: merge stable into mercurial-4.5
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 22 May 2018 23:51:57 +0530] rev 3815
utility: use ui.interactive() instead of checking config value
Before this patch, the rev selection prompt which pops up in case of ambiguity
to ask user to select a rev used to check the config value of ui.interactive
which can is by default set to None.
We should use ui.interactive() instead which is more smart in such cases.
Thanks to martinvonz for suggesting this.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 08 Jun 2018 19:48:53 +0530] rev 3814
CHANGELOG: add couple of entries about things fixed
We are preparing for a release!
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 08 Jun 2018 17:36:28 +0530] rev 3813
next-prev: always respect the --merge flag
An earlier bug fix series which started respecting commands.update.check
introduced a bug in which --merge was not respected sometimes. This patch fixes
that behavior by passing updatecheck as 'none' to hg.updatetotally() if --merge
is passed which is similar to what `hg update` does.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 08 Jun 2018 18:32:48 +0530] rev 3812
next-prev: add tests showing --merge not respected in some cases
This patch adds tests which show that --merge is not respected when you set
commands.update.check to any value.
This is a bug I wrote few days ago and will fix it in next changeset.
I like this process of writing bugs and fixing them.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 22:59:39 +0530] rev 3811
evolve: store the evolvestate if relocation results in conflicts
We missed storing the evolvestate on disk when relocation lead to conflicts. We
need to store it to grab information to continue or abort or stop the evolve.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 22:45:54 +0530] rev 3810
tests: add more test of resolution of content-divergent changesets
This patch adds test of resolution of content-divergent changesets when
relocation is required and it leads to conflicts. The test shows that we are not
doing the right thing. This will be fixed in upcoming patches.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 18:18:10 +0530] rev 3809
evolvestate: store info about relocation while resolving content-divergence
While resolving content-divergence when they are on different parents, we
relocate one of the node to parent of another one and this can lead to conflicts
sometimes. So we need to store information about that state in evolvestate so
that we can use that when user does `hg evolve --continue` or `--stop` or
`--abort`.
Now that we make sure, we store the new other node in evolvestate, we fix the
behavior of handling the relocated commit and merge the right changesets.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 18:13:54 +0530] rev 3808
evolve: factor out logic to merge content divergent csets in separate fn
This will help us in reusing the logic if we need to while doing evolve
--continue.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 20:27:03 +0530] rev 3807
evolve: commit the transaction if conflicts occur while merging content-div
Yes, let's commit the transaction in case conflicts occur. Yes, this is what
unshelve does and this is one of the reasons we don't like unshelve.
Previous patches added support for resolving content-divergence when they are on
different parents with parent of one being the gca. In such cases, we relocate
one of the divergent commit to the parent of another one.
All the relocation stuff and merging divergent changeset stuff happens in a
single transaction, so if there are conflicts while merging, we abort and the
transaction rollsback and our relocated commit is not applied after abort.
We don't want to process the relocation because that can lead to conflicts and
we will have dirty wdir because of resolving conflicts.
So, we commit the transaction when merging results in conflicts to make sure if
relocation happened, we commit that.
This fixes the absence of relocation commit found in previous patch and uncover
a new bug about handling of relocated commit. Upcoming patch will fix it.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 07 Jun 2018 15:54:32 +0530] rev 3806
tests: add tests for resolving content-divergence when different parents
This patch adds more tests for cases when we try to resolve content-divergence
when they are on different parents.
The last test shows the we are somehow missing the relocated commit in
interrupted transaction. This will be fixed in next patch.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 01 Jun 2018 19:52:06 +0530] rev 3805
evolve: implement resolution of content-divergence when on differet parents
This patch implements the basic version of resolution of content-divergence
changesets when they are on different parents but one of the parent is gca of
both the different parents.
The functionality first relocates the divergent changeset which was left behind
and then resolves the content-divergence like it resolves in normal cases.
This is a very basic implementation because it still does not work on
interrupted evolution. Test changes in this patch shows the basic functionality
working. The output of dry-run is also required to be tweaked in such cased.
Upcoming patches will add more tests and will improve the implementation to work
during conflicts too.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 01 Jun 2018 19:57:19 +0530] rev 3804
tests: add tests for resolving content-divergence with parent change
This patch adds a new test file test-evolve-content-divergence.t which tests the
resolution of content divergence when the divergent changesets does not have the
same parents.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 06 Jun 2018 03:49:17 +0530] rev 3803
CHANGELOG: add an entry about fixing issue5877
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 06 Jun 2018 03:26:47 +0530] rev 3802
evolve: pop up editor if conflicts occur while merging commit messages
Last patch added support for merging commit messages while resolving content
divergence. In case of conflicts we fallback to one of the divergent commit
messages.
After this patch, we will pop up an editor where user has to resolve the
conflicts in the commit messages and then continue.
Tests are added for this. We need to fix handling in test-sharing.t to use
HGEDITOR to fix conflicts and pass the new commit message.
Future improvement can be that we should respect HGMERGE while merging commit
descriptions too.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 04 Jun 2018 01:28:02 +0530] rev 3801
evolve: merge commit messages while resolving content-divergence (issue5877)
While resolving content-divergence, there can be divergence in commit messages
too which should be resolved.
This patch uses the hg's internal merge API's to merge commit messages of
divergent changesets with predecessor as the base.
In case of conflicts, we fallback to divergent's commit message which should be
changed in future. We should pop up the editor with the commit message and the
conflict markers and let user fix that.
Tests are added for the functionality added.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 06 Jun 2018 01:19:36 +0530] rev 3800
evolve: move if-else block under the right block
the index related if-else should be only executed when all three base, divergent
and other have different branch names.
I coded this last night and mistakenly mis-indented it. Caught when I was adding
more tests.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Jun 2018 22:02:24 +0530] rev 3799
tests: make sure we don't result in commit messages conflict
Upcoming patches will introduce functionality of merging commit messages while
resolving content divergence which can lead to conflicts.
We don't want to test the conflicts scenario here, so let's make sure there are
no conflicts of commit messages in this test.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Jun 2018 21:02:09 +0530] rev 3798
tests: don't use mkcommit shell function in test-divergent.t
Upcoming series will start merging commit descriptions while resolving
content-divergence. This tests are here to test the basics of content-divegrence
resolution and we should not be testing much of commit description merge here.
Replacing mkcommit function with normal hg calls will help us decide on the
commit messages ourselves and prevent conflicts while merging commit messages.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 06 Jun 2018 14:35:36 +0200] rev 3797
evolve: remove duplicated documentation
File saving failureā¦
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 06 Jun 2018 04:09:49 +0530] rev 3796
evolve: show `hg help evolve.interrupted-evolve` in error when conflicts
The help list various flags which you can use during interrupted evolve
resolution and description about what they do. This will be very helpful for
user on how to continue an interrupted evolve.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 01:11:59 +0530] rev 3795
evolve: add a help topic `Interrupted-Evolve`
This help topic contains description on how the various flags work during
interrupted evolve. This help topic will be included in error message during
interrupted evolve in next patch.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 05 Jun 2018 03:37:15 +0200] rev 3794
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 05 Jun 2018 03:36:40 +0200] rev 3793
changelog: fix version number error
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 02:12:14 +0530] rev 3792
evolve: return the new node formed only as the replacement
sometimes, the the other content divergent changeset is obsoleted in favour of
the local divergent changeset in which case we should not store that as a
replacement because `hg evolve --abort` will strip that changeset. Let's make
sure we return the newnode only if formed.
The test results shows that we are still not 100% accurate as we need to strip
an obsmarker.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 17:04:20 +0530] rev 3791
tests: add more test of --abort flag for content-divergence resolution
This patch adds test when we resolve multiple content-divergence changesets at
once and resolution fo first content-divergence does not form new commits,
resolution of second one leads to conflicts.
As the output shows, we are wrongly stripping a changeset here, which should be
fixed in next patch.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 04 Jun 2018 04:03:02 +0530] rev 3790
evolve: prompt user for branch selection while resolving content-divergence
When resolving content-divergence, there can be case when both the
content-divergent changesets are on different named branches. In that case, we
are not sure which branch should the resolution commit should be on.
This patch adds logic to prompt user to choose the branch which the resolution
commit should be on and then creates the new resolution commit on that branch.
This also adds a new test file which have tests for the branch selection feature
we have added.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Jun 2018 03:51:01 +0530] rev 3789
evolve: pass the base revision in _completecontentdivergent()
We need the base revision to merge commit messages, branches and more stuff.
Let's make sure we have that by passing into the function which completes the
divergence resolution.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Jun 2018 03:49:49 +0530] rev 3788
evolve: store the base of content-divergents in evolvestate
We need the base changeset for merging commit messages, branches. Let's store it
in evolvestate.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 05 Jun 2018 00:53:21 +0530] rev 3787
evolve: use cmdrewrite.amend() instead of creating a new commit
This patch backs out changeset 88601e1cd5d8.
We replaced cmdrewrite.amend() with creating new commit because using amend(), a
high level function was not good and creating a new commit gave us more control
over things.
**HOWEVER** to get more control, you need to get arrange all the pieces together
perfectly. Creating a new commit, the existing logic has some bugs around
dirstate handling, the `repo.dirstate.setparents()` call especially. Sometimes
this fixes the dirstate correctly sometimes not.
As Pierre-Yves David said, "Having a "clumsy" implementation with the right
behavior is usually a good first step. So having an amend based implementation
seems like a good first step.", let's take a step back and get back using amend
so that we can have a correct basic implementation which is bug free.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 01:59:41 +0530] rev 3786
corecompat: update the tests output to show phase update summary
eb9835014d20 in core added support to transactions to show a summary on the
phase changed during that transaction. Due to this, couple of tests output needs
to be updated. This patch does that.
While realeasing evolve, this patch should be backed out on branches where
hg<=4.6.
CORE-TEST-OUTPUT-UPDATE: eb9835014d20
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 03:24:43 +0530] rev 3785
CHANGELOG: add an entry about issue 5808 being fixed
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 03:21:25 +0530] rev 3784
next-prev: replace the error hint to mention about `--merge` flag
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 03:13:47 +0530] rev 3783
tests: add tests for conflicts while respecting commands.update.check
This patch adds tests to check that we don't run into conflicts while respecting
commands.update.check.
The error message now does not show the hint about --merge option which we
should fix.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 02:37:13 +0530] rev 3782
next: respect `commands.update.check` config option in `hg next` (issue5808)
`commands.update.check` config option determines what level of checking should
be done when we update to another revision. When we set this config option to
`noconflict`, it updates your working directory to a specified revision only
when there will be no conflicts which is a very nice behavior.
This patch adds logic to respect the config option so that we can have that nice
behavior with `hg next` too.
It turns out, we just needed to use hg.updatetotally() and add some cases to
check config option.
Right now, we only respect the config if value is set to `noconflict`. Otherwise
we fallback to the default behavior.
This is a part of fixing issue5808. Test changes demonstrate the fix.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 02:36:24 +0530] rev 3781
prev: respect `commands.update.check` config option in `hg prev` (issue5808)
`commands.update.check` config option determines what level of checking should
be done when we update to another revision. When we set this config option to
`noconflict`, it updates your working directory to a specified revision only
when there will be no conflicts which is a very nice behavior.
This patch adds logic to respect the config option so that we can have that nice
behavior with `hg prev` too.
It turns out, we just needed to use hg.updatetotally() and add some cases to
check config option.
Right now, we only respect the config if value is set to `noconflict`. Otherwise
we fallback to the default behavior.
This is a part of fixing issue5808. Test changes demonstrate the fix.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 02:50:55 +0530] rev 3780
tests: add test demonstrating issue5808
This patch adds test showing that `next` and `prev` does not respect the
`commands.update.check` config option, particularly when set to `noconflict`.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 02:26:19 +0530] rev 3779
next: bail out early in `hg next --evolve` if dirty wdir
This patch adds logic to bail out early when --evolve is passed with next
command and the working directory is dirty.
This will help us in preventing the message saying `do you want --merge` which
is useless and misleading when `--evolve` is passed.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 02:24:28 +0530] rev 3778
tests: add test of `hg next --evolve` with dirty working directory
I was testing some output change to `hg next --evolve` in dirty working
directory and found that we don't have any test for that.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 03 Jun 2018 03:35:22 +0530] rev 3777
CHANGELOG: add an entry about fixing issue5897
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 27 May 2018 02:32:58 +0530] rev 3776
evolve: fix `hg abort` when hg next --evolve leads to conflicts (issue5897)
Before this patch, if you do `hg next --evolve` and end up having conflicts and
then you try `hg abort`, it will throw a KeyError. This patch fixes that.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 30 May 2018 00:34:35 +0530] rev 3775
tests: add a test demonstrating issue5897
When conflicts are caused due to `hg next --evolve`, `hg evolve --abort` breaks!
This patch adds test to demonstrate that. This will be fixed in next patch.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 17:50:02 +0530] rev 3774
evolve: add an `--update` flag to `hg evolve` command
This patch adds a new `--update` flag which defaults to True. The update flag
updates the working directory to the head of evolved revisions after `hg evolve`
command.
This flag can be used to not update your working directory after `hg evolve`
which has been one of the biggest feature request from fig team at Google. To
not update your working directory, the user can do `hg evolve --no-update`.
If the working directory get obsoleted by evolve command, it will update to the
successor.
This patch also adds some basic tests for the flag introduced.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 02:02:11 +0530] rev 3773
tests: add tests for testing --abort while content-divergence resolution
This patch adds a new test file with a very basic test of `--abort` on an
interrupted evolve which was resolving content-divergence. Upcoming patches will
add more rigourous tests.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 00:58:50 +0530] rev 3772
evolve: fix storage of replacements and temprevs node in evolvestate
The _completephaseivergent() was not respecting rules on how to store the new
node ids created in evolvestate. The rules are:
* store the temporary relocated commits in temprevs
* store the final new commit in replacements
This patch make sure we follow the above rules and also use the return value
returned by _resolvephasedivergence().
The tests change demonstrates that we are all good now.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 00:58:35 +0530] rev 3771
tests: add more tests related to aborting while resolving phase-divergence
The tests shows the something is still broken related to abort while resolving
phase-divergence which will be fixed in upcoming patches.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 23 May 2018 12:16:24 +0200] rev 3770
topic: suggest to clear a topic that becomes empty
We add a hint suggesting "hg topic --clear" when a topic becomes empty.
This usually happens when all its changesets get public, that is when
the user does a 'phase -p' or when they pull from a server. To
discriminate relevant cases for which we should display the hint (and
typically exclude explicit 'hg topic --clear' operation), we look for
the transaction "type" to only consider 'phase' or 'push' transaction.
In the latter case, the transaction name is not simply 'push-response'
but it also included the remote URL so we need to match on string
content.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 23 May 2018 11:37:37 +0200] rev 3769
topic: display a hint pointing at help when a topic becomes non-empty
This is an attempt at avoiding "mistakes" by new users of topics when
they pull a topic and publish its changesets while being checked out. In
this case, the topic will become empty but still be active; however, if
this is a "foreign" topic, the user will not likely want to keep it
active for the next commit operation. So we add a hint message pointing
at general help of "topics" command so that they can eventually do
something and learn about "hg topics --clear".
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 24 May 2018 18:57:46 +0200] rev 3768
branching: merge with compat fix on default
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 24 May 2018 01:50:26 +0530] rev 3767
evolve: add compat for repair.stripbmrevset which is moved to scmutil
This patch adds compatibility logic for repair.stripbmrevset() which is moved to
scmutil as bookmarkrevs().
This fixes test-prune.t failure.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 23 May 2018 11:18:14 +0200] rev 3766
evolve: update the readme with more information about contribution
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 23 May 2018 11:03:31 +0200] rev 3765
topic: dedent items about publishing behavior in docstring
Also change item bullets from '#' to '*'.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 23 May 2018 11:00:11 +0200] rev 3764
topic: use preformatted block for config snippets documentation
We add :: markers, empty line and properly indent blocks where needed.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 23 May 2018 11:09:37 +0200] rev 3763
tests: add a test for "hg help -e topic"
Currently, some configuration snippets do not render well; we'll fix
this in forthcoming changesets.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 23 May 2018 01:24:02 +0200] rev 3762
branching: merge with stable
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 22 May 2018 21:33:50 +0530] rev 3761
content-div: add test showing `--stop` works during interrupted resolution
This patch adds a test showing that the --stop flag of `hg evolve` works well
during interrupted content-divergence resolution.
The --stop flag now works with all the three different type of instability
resolution very well and we should advertise it more.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 23 Apr 2018 14:48:53 +0530] rev 3760
evolve: create new commit while resolving content-divergence
Before this patch, we used to amend one of the content-divergent changes with
the changes from the merge. Creating a new commit will certain advantages like
letting user enter a commit message, showing user the new merge diff before
commiting the content-divergent resolution and give us more control in the
implementation part.
The reason amend was used initially was just because it was easy. There are some
tests update due to change.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 22 May 2018 20:33:42 +0530] rev 3759
content-divergence: store the resolved revs in evolvestate['replacements']
The support for continuing a conflicted content-divergence resolution was added
some time ago. That support lacked storing of the resolved rev in the
evolvestate['replacements'] which marks the node as resolved and does not try to
resolve that node again.
Since we didn't store, the resolution, processes the same node again. This patch
makes sure we store the information in evolvestate that a certain
content-divergent node is resolved to prevent pre-processing it again.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 22 May 2018 23:51:57 +0530] rev 3758
utility: use ui.interactive() instead of checking config value
Before this patch, the rev selection prompt which pops up in case of ambiguity
to ask user to select a rev used to check the config value of ui.interactive
which can is by default set to None.
We should use ui.interactive() instead which is more smart in such cases.
Thanks to martinvonz for suggesting this.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:46:20 +0530] rev 3757
evolve: make `--abort` strip the temporary revs created during resolution
During divergence resolution, `hg evolve` created temporary relocation commits
which needs to be stripped off during `hg evolve --abort` to get back to the
same state where we were. Previous patch added a new list temprevs to be stored
in evolvestate.
This patch starts storing the temp relocated node created during
phase-divergence resolution in evolvestate and make sure we consider stripping
it too while `hg evolve --abort`.
The test changes demonstrate the fix. Now we are sucessfully aborting a
phase-divergence resolution.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:43:23 +0530] rev 3756
evolve: store a list of temprevs in evolvestate
There are temporary revisions which are created as a part of divergence
resolution which needs to be stripped off if user runs `hg evolve --abort`. We
need to save the nodeids of those temporary revisions in the evolvestate.
The temprevs list will help in the above mentioned use cases.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:36:14 +0530] rev 3755
evolve: check for None before adding in set of revisions to strip
After previous patch, replacements can contain None. Let's make sure we don't
add None to the revisions to strip during `hg evolve --abort`
The test changes demonstrate the usefulness of this and the previous patch. Now
abort is working and public changesets are not a problem.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:33:14 +0530] rev 3754
evolve: return the new replacement node to be stored in evolvestate
While resolving phase-divergence, we can end up obsoleting the phase-divergent
commit in favor of the public commit. Before this patch we return the node of
public commit to store as a replacement of the phase-divergent commit.
The above will not cause any problem till the time we use `hg evolve --abort` on
an interrupted evolve which tries to strip the replacement nodes because it
thinks that the replacements nodes are the ones which are created during the
resolution and are new.
Since we will be stripping a public node, `evolve --abort` will error out saying
cannot strip public changeset, unable to abort evolve which is bad.
We should make sure, replacements should only consist of new nodes formed. If
the instablity is resolved by obsoleting in favour of old changeset, we should
not store the old changeset in replacements in evolvestate.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:39:38 +0530] rev 3753
evolve: don't make values of replacements dict lists
There was inconsistency in code base related to the values stored in
replacements dict in evolvestate. At some places we store a list, at some places
we just store the nodeid. Let's make sure we store only the nodeid, not a list.
If there are cases, when there are multiple replacements or changesets created
during resolution, later patch will introduce storing temprevs in evolvestate
which should be used.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:41:08 +0530] rev 3752
tests: add a test file `--abort` flag while resolving phase-divergence
This patch adds a new test file test-evolve-abort-phasediv.t which will contain
tests for `hg evolve --abort` flag while resolving phase-divergence.
There is a case in this test which does not work right which will be fixed in
upcoming patches.
Martin von Zweigbergk <martinvonz@google.com> [Tue, 15 May 2018 22:17:27 -0700] rev 3751
evolve: pass revisions as strings to commands.*()
It's usually fine to pass integer revisions to e.g. commands.update(),
but when directaccess is enabled, it attempts to parse it a revset,
which fails.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 01:27:13 +0530] rev 3750
tests: rename test-evolve-abort.t to test-evolve-abort-orphan.t
We renamed the test file because it contains all the cases related to orphan
resolution. Now we care about divergence resolution too and hence we must have
separate specific test files for each type.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 21 May 2018 16:56:52 +0200] rev 3749
branching: merge with branch for stable
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 16:25:29 +0200] rev 3748
compat: update obshashrange test output
Mercurial core bfe8ef6e370e seems to have changed the order of some messages.
Simply accept the change in the test file.
CORE-TEST-OUTPUT-UPDATE: bfe8ef6e370e
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 14:56:51 +0200] rev 3747
test: update to new outputs
Mercurial core ea63a2004d09 update the hidden changeset warning during update
after the effective update.
CORE-TEST-OUTPUT-UPDATE: ea63a2004d09
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 13:07:49 +0200] rev 3746
compat: fix obslog with Mercurial 4.6+
Mercurial core 3fe1c9263024 removed the diffopts attribute on
changesetprinter. Backport consuming diffopts in the constructor for old
versions of changesetprinter and update the non-graph code to extract the
patch option and pass it directly.
Faheem Mitha <faheem@faheem.info> [Sat, 19 May 2018 18:26:36 +0530] rev 3745
debian: add line to clean-docs target to delete additional docs file
Martin von Zweigbergk <martinvonz@google.com> [Mon, 14 May 2018 15:25:38 -0700] rev 3744
amend: use context manager for locks (issue5887)
Martin von Zweigbergk <martinvonz@google.com> [Thu, 10 May 2018 21:37:28 -0700] rev 3743
evolve: point to '--abort' in verbose status message
f6979d64b9fb (evolve: point to '--abort' in error message, 2018-04-22)
changed "hg update -C ." to "hg evolve --abort" in error
messages. This commit makes the same change in the verbose status
message (the one that warns about unfinished evolve).
There's still one mention "hg update -C" in our codebase. That's after
"hg evolve --content-divergent" fails, but I don't think "hg evolve
--abort" works in that case (yet?).
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 22 Apr 2018 20:14:42 +0530] rev 3742
evolvecmd: add comments and new lines in content-divergence handling logic
I have visited this logic three times in last 10 days and I have to re-read the
whole code to make sure I don't miss any part. Adding comments will help
understanding the code in better and fast way.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:18:54 +0530] rev 3741
evolve: show cset hash in "merging conetnt-divergent changeset"
While I was here I also mae de it repo.ui.status() instead of repo.ui.note() to
align the behavior with rest of the messages.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:14:41 +0530] rev 3740
evolve: show cset hash in "update to local conflict" message
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:11:29 +0530] rev 3739
evolve: use hg.updaterepo() instead of hg.update() to hide stats
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:04:18 +0530] rev 3738
evolve: fix the conflicts error message during content-divergence resolution
Before last patch, we didn't had an automated way to continue an interrupted
content-divergence resolution and we used to show a very long error message on
how to continue manually.
This patch replaces that long error message with nice small message which tells
how to continue and how to abort. We still show `hg update -C .` to abort as we
need to test and make `--abort` work in case of content-divergence.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:51:56 +0530] rev 3737
evolve: add logic to continue interrupted content-divergence resolution
We continue the interrupted content-divergence using the logic to complete
content-divergence which we refactored in it's own function few patches ago.
We had to delete evolvestate file before using cmdutil.amend() because otherwise
we can't use the function. This leads to a hack which deletes the evolvestate
file, we may want to not to use the high level API function here. Also we had to
pass evolvestate also to _completecontentdivergent function because of this.
This patch also, adds a test which demonstrates that the logic works fine.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:48:36 +0530] rev 3736
evolve: store the evolvestate file when encountering conflicts
This patch makes `hg evolve` store the evolvestate file when it encounters merge
conflicts while resolving content-divergence.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:13:29 +0530] rev 3735
evolve: take out logic to complete phase-divergence in separate fn
This patch takes out the logic to complete the content-divergence resolution to
it's own separate function so that we can reuse it in case of interrupted
resolution.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 17:54:01 +0530] rev 3734
evolve: store divergent nodes in evolvestate when resolving content-divergence
We need to store the divergent nodes in evolvestate so that we can continue an
interrupted phase divergence resolution.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 02 May 2018 11:59:06 +0200] rev 3733
branching: merge stable into default
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 28 Apr 2018 18:44:07 +0530] rev 3732
tests: add test showing `hg evolve --stop` works fine with phase-divergence
This patch adds a new test file which contains test demonstrating that `--stop`
flag works well while resolving phase-divergence using `hg evolve`.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 28 Apr 2018 18:03:32 +0530] rev 3731
tests: rename the test file to add 'orphan' in the name
test-evolve-stop.t contains test for `hg evolve --stop` for orphan resolution
only. We also need to test the flag while resolving divergence. It will be good
if we have a test file for each type of instability.
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:28:34 +0800] rev 3730
tests: test that `hg obslog wdir()` aborts with a useful message
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:19:45 +0800] rev 3729
obshistory: make obslog work when a commit doesn't have any description
This logic is taken from logcmdutil.changesetprinter class. It checks that
commit description is not empty before extracting the first line (before this
patch it would try to index an empty list).
Stripping description also makes obslog behave more like regular log when there
are trailing/leading whitespaces.
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:14:10 +0800] rev 3728
obshistory: use a more appropriate type for obslog entries
cand is actually a regular changeset and not 'M' (graphmod.MISSINGPARENT). And
'M' is only used for graph edges, but cand is drawn as a graph node.
Visually there's no effect, but the code makes more sense this way.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:19:13 +0100] rev 3727
packaging: mark as development version
This help avoiding confusion when installing from source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:18:19 +0100] rev 3726
branching: merge with latest release
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:16:35 +0100] rev 3725
packaking: mark as development version
This avoid confusion when installing from source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:36 +0100] rev 3724
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:35 +0100] rev 3723
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:34 +0100] rev 3722
test-compat: merge stable into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:14 +0100] rev 3721
Added tag 8.0.0 for changeset 116cdd8c102a
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:02:43 +0100] rev 3720
packaging: update version number
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 13:55:52 +0100] rev 3719
packagin: update `tested-with` statement
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 13:49:00 +0100] rev 3718
changelog: mention 4.6 compatibility
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 11:55:49 +0100] rev 3717
Changelog: pre-version gardening
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 01:58:45 +0100] rev 3716
testcompat: update output for Mercurial 4.3
Lets of minor update + one major update to tests/test-evolve-phase-divergence.t
since all hashed chance (different instability name).
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:23:00 +0200] rev 3715
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:11:10 +0200] rev 3714
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 08:57:18 +0100] rev 3713
testcompat: revert output change from new capabilities
This new capabilities is 4.6 only.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 08:42:47 +0100] rev 3712
testcompat: revert output change from 54a469cd5b26
These are 4.6 only changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 08:41:57 +0100] rev 3711
testcompat: revert output change from 1de6ba0ac6d7
These are 4.6 only changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:10:26 +0200] rev 3710
testcompat: merge stable into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 15:23:15 +0100] rev 3709
compat: handle different `ui.edit` signature with Mercurial 4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 16:13:42 +0100] rev 3708
wirepeer: try modern module first
This avoid some issue with remaining .pyc
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 12:07:35 +0100] rev 3707
compat: handle lack of allpredecessors for Mercurial 4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:03:05 +0100] rev 3706
branching: merge further fix into stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 11:44:05 +0100] rev 3705
wrapping: fix a silly error were we checking on module and wrapping the other
...
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 11:04:27 +0200] rev 3704
brancing: merge next release into default
We are about to release hg-evolve 8.0.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 21 Apr 2018 11:01:12 +0200] rev 3703
test-compat: open mercurial-4.5 branch
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 22 Apr 2018 11:40:17 +0200] rev 3702
evolve: point to '--abort' in error message
The way to escape and evolve run has been updated and we need to tell our user
about it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:27:13 +0200] rev 3701
compat: drop compatibility layer for pager
All versions we support now support `ui.pager`.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:25:17 +0200] rev 3700
compat: drop compatibility layer for duplicatecopies
We no longer support version before Mercurial 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:21:44 +0200] rev 3699
compat: drop compatibility layer for bookmark.applychanges
We now only support Mercurial version down to 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:15:10 +0200] rev 3698
compat: from compatibility layer for allprecursors
We only support down to 4.3 now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:12:37 +0200] rev 3697
compat: drop compatibility layer for successorssets
We support down to Mercurial 4.3 now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:08:01 +0200] rev 3696
compat: drop compatibility wrapper for "relevantmarkers"
We no longer support version without the logic we have been adding.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:51:53 +0200] rev 3695
compat: drop compat layer for cleanupnodes
We no longer support version lower than 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:07:23 +0200] rev 3694
compat: from compatibility layer for createmarkers
We support down to 4.3 now. It supports operation.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:01:49 +0200] rev 3693
compat: drop obsutile layer
Mercurial 4.2 is no longer supported.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 15:59:39 +0200] rev 3692
compat: drop vfsmod compat layer
Mercurial 4.2 is no longer supported.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:26:03 +0200] rev 3691
evolve: use in code filtered error for 4.6
Things have been upstream into core for a while, let us use them instead of the
evolve version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 15:51:44 +0200] rev 3690
documentation: refer to 4.3 in the help text
Minimal version supported is now 4.3. Drop reference to 4.2 in the help.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:14:34 +0200] rev 3689
topic: remove compatibility for older version in discovery wrapping
Support for 4.1 and 4.2 has been dropped.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:01:24 +0200] rev 3688
obscache: drop compat layer to access public changeset
We can now access precomputed sets. (compat to 4.1 and 4.2 dropped)
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:00:12 +0200] rev 3687
obscache: drop compat layer for obsmarkers reading
We cna now use a version with the argument we needs.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 13:40:57 +0200] rev 3686
template: drop compatibility layer
Support has been dropped for 4.1 and 4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 13:35:31 +0200] rev 3685
timer: drop compat layer for time
Support for 4.1 and 4.2 has been dropped.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 11:38:13 +0200] rev 3684
compat: drop support for Mercurial 4.2
Since Mercurial 4.6 is about to be released, we drop support for 4.2 too.
(code still need to be cleaned up).
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 11:39:04 +0200] rev 3683
compat: close test-compat branch for mercurial-4.2
Support for this version have just been dropped.
Martin von Zweigbergk <martinvonz@google.com> [Wed, 18 Apr 2018 22:54:11 -0700] rev 3682
evolve: add support for hg >= b4d85bc1
Mercurial commit b4d85bc1 deleted the wireproto module and its
contents are now in various other modules, so we can not even do
unchecked imports of it now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:59:12 +0200] rev 3681
discovery: handle deletion of 'wireproto' module
Mercurial commit b4d85bc122bd. deleted the wireproto module and its
contents are now in various other modules, so we can not even do
unchecked imports of it now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:55:57 +0200] rev 3680
evolve: handle wireproto module deletion for registering new commands
Module have been deleted in b4d85bc122bd. We can no longer import it blindly.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:53:59 +0200] rev 3679
minitopic: handle wireproto module change from b4d85bc122bd
This module have been scattered in other place, so we need to detect and handle
this for 4.6+
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:50:24 +0200] rev 3678
topic: handle wireproto module change from b4d85bc122bd
This module have been scattered in other place, so we need to detect and handle
this for 4.6+
Martin von Zweigbergk <martinvonz@google.com> [Wed, 18 Apr 2018 22:36:54 -0700] rev 3677
obsexchange: remove unused import of wireprotoserver
This seems to be unused since 300d7d019b9.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 18 Apr 2018 10:08:05 +0200] rev 3676
compat: rename resolvepartialhexnodeid to resolvehexnodeidprefix
The name changed in 5f8f013e7d52
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 19:42:46 +0200] rev 3675
compat: access datestr in a way compatible with verison prior to 4.6
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 19:42:26 +0200] rev 3674
compat: fallback to compatible partial lookup prior to 4.6
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 18:30:56 +0200] rev 3673
import: adapt to fd1dd79cff20
With the latest state of the code, the patch is passed to "import try one" as
parsed.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 18:10:53 +0200] rev 3672
import: grab the expected node value on the fly
We no longer parse the patch beforehand this will reduce inconsistency with
newer API.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 17:58:12 +0200] rev 3671
import: use a less direct approach to store the expected node
This will help later refactoring.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 15:45:58 +0200] rev 3670
compat: adapt `amend --patch` to the new `patch.extract` API
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 15:04:15 +0200] rev 3669
compat: deal with change in the wireproto module
Martin von Zweigbergk <martinvonz@google.com> [Mon, 16 Apr 2018 12:46:23 -0700] rev 3668
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 16 Apr 2018 20:18:10 +0200] rev 3667
topic: allow '.' in topic names
This is also commonly used.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 16 Apr 2018 10:58:06 -0700] rev 3666
relocate: look up partial nodeids in unfiltered repo
This accidentally changed to using the filtered repo in commit
0f0f3135.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 16 Apr 2018 17:11:27 +0200] rev 3665
compat: avoid using partial node ID in lookup
This is getting deprecated in 4.6.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 16 Apr 2018 00:05:54 +0200] rev 3664
test: apply output change from protocaps
CORE-TEST-OUTPUT-UPDATE: afcfdf53e4b5
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 15 Apr 2018 23:24:03 +0200] rev 3663
test: update output to match upstream
The exact wording for filtered error has been changed.
CORE-TEST-OUTPUT-UPDATE: ecd3f6909184
Martin von Zweigbergk <martinvonz@google.com> [Fri, 13 Apr 2018 09:26:28 -0700] rev 3662
evolve: don't pass stringified int to repo.__getitem__
We were doing repo['-1'], which is now deprecated. Switch to
repo['tip'], which is much clearer anyway (I initially thought this
was nullrev and sent an incorrect patch until Pierre-Yves corrected
me).
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 11 Apr 2018 07:23:34 +0200] rev 3661
patch: offer the user a chance to fix the patch if it fails to apply
The experience is still not great, but better than purely dropping the changes.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 18 Mar 2018 23:48:06 +0530] rev 3660
amend: add a new flag `--patch` to `hg amend`
This patch adds a new flag `--patch` to `hg amend` which pops up an editor with
the patch of working directory parent which you can change, and when you exit
the editor the patch with changes is applied to current working directory with
old changeset being obsoleted in favour of new one created by the applied patch.
If supplied filenames, only those filenames are present in the popped editor and
rest files stay the same way in the commit as they were.
The extension of the file which opens up in editor is '.diff', we cannot have it
as '.patch' as there will be develwarns related to that. We need to change to
patch core and undo some change to achieve this.
The implementation does not use any core API rather it has picked chunks from
API which are required. One main reason to not use core import API is that we
have to change wdir parent before using patch.patch() which I will like to avoid
to make sure we handle merge cases too. While writing this patch I have spend
lot of time try to use internal API's to work for this but none of them served
the purpose well. If I have time in future and work on similar problem again, I
am going to write better high-level API's which uses patchstore to achieve this.
A new test file test-amend-patch.t which contains a lot of testing of the
feature.
Anton Shestakov <av6@dwimlabs.net> [Thu, 12 Apr 2018 13:30:28 +0800] rev 3659
stablerangecache: include units in ui.progress() calls
Anton Shestakov <av6@dwimlabs.net> [Thu, 12 Apr 2018 13:28:30 +0800] rev 3658
stablerange: include units in ui.progress() calls
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 20:00:43 +0530] rev 3657
tests: add test demonstarting issue5833 is fixed
Previous patch which fixed issue5832 also fixed issue5833 as the root cause for
both was same. This patch adds test of issue5833 as well.
CHANEGLOG entry is also added for the fixed issues.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 20:13:27 +0530] rev 3656
utility: convert node from MultipleSuccessorsError to rev numbers (issue5832)
utility.builddependencies() deals with rev numbers but MultipleSuccessorsError
returns nodeid which breaks the function and also breaks instability resolution.
Previou patch demonstrate the breakage. This patch makes sure we convert those
nodeids to rev numbers before processing ahead.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 15:35:57 +0530] rev 3655
tests: add a test demonstarting issue5832 traceback
The traceback will be fixed in upcoming patches.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 14:56:27 +0530] rev 3654
CHANGELOG: add an entry about `hg evolve --abort`
Previous patches added a new flag `--abort` for `hg evolve` which aborts an
interrupted evolve. Currently this only works for orphan resolution cases which
is very common and most people use `evolve` for that. So let's add an entry
about that.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 17:34:51 +0530] rev 3653
evolve: restore bookmarks correctly after `hg evolve --abort`
This patch adds logic to store bookmark movements in evolvestate class and
restore bookmarks to their original place if `hg evolve --abort` is called.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 17:42:32 +0530] rev 3652
topic-ext: restrict the format of topic names
This patch restrict the format of topic names to make sure they consist only of
alphanumeric, '_' and '-' characters.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 23:42:47 +0530] rev 3651
serverminitopic: wrap context.changectx.branch instead of context.changectx
Recently some changes in core resulted in this wrapping of class leading to an
infinite recursion. Let's wrap the particular function instead of wrapping the
whole command.
This fixes test-minitopic.t which was breaking.
Boris Feld <boris.feld@octobus.net> [Fri, 06 Apr 2018 17:53:41 +0200] rev 3650
templatekw: remove obsfatedata templatekw
Individuals fields are available in core as single template functions.
Kyle Lippincott <spectral@google.com> [Thu, 29 Mar 2018 13:01:05 -0700] rev 3649
evolve: do not exit 1 when there are no troubled changesets (issue5823)
There are possibly other cases we also do not wish to exit non-zero for in this
function, but I did not analyze them closely and am just looking at resolving
issue5823.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 06 Apr 2018 17:54:58 +0200] rev 3648
changelog: add an entry about the memory fixes
Anton Shestakov <av6@dwimlabs.net> [Fri, 06 Apr 2018 14:37:22 +0800] rev 3647
safeguard: use self instead of repo in noautopublishrepo.checkpush()
Referring to repo here was somehow preventing it from being garbage-collected
(important in hgweb, where currently every request gets a new repo).
Anton Shestakov <av6@dwimlabs.net> [Fri, 06 Apr 2018 14:36:36 +0800] rev 3646
stablerangecache: use self instead of repo in stablerangerepo.stablerange()
Referring to repo here was somehow preventing it from being garbage-collected
(important in hgweb, where currently every request gets a new repo).
Anton Shestakov <av6@dwimlabs.net> [Fri, 06 Apr 2018 14:26:24 +0800] rev 3645
obscache: use self instead of repo in obscacherepo.updatecaches()
Referring to repo here was somehow preventing it from being garbage-collected
(important in hgweb, where currently every request gets a new repo).
Boris Feld <boris.feld@octobus.net> [Wed, 04 Apr 2018 16:29:48 +0200] rev 3644
templatekw: fix templatedata for 46
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 31 Mar 2018 11:53:09 +0200] rev 3643
style: fix a couple of pyflakes complains
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 16:43:28 +0530] rev 3642
evolve: add a `--abort` flag for `hg evolve` command
This patch adds a new flag `--abort` to `hg evolve` command which will abort the
interrupted evolve going on undoes the changes created by the evolve command
till now. The changes are bookmark movements, creation of evolved commits,
obsolete the old commits in favor of evolved commits.
In case when user changed things while the interrupted evolve, like did some
actions which created a new commit on top of evolved commits, or changed phase
of evolved commits to public, the evolve fails to abort as we should not strip
out the new commit formed by user neither we can strip the public changeset. The
abort fails and tell user to use `hg evolve --stop` instead.
Right now bookmark movement is broken, and will be fixed in upcoming patches.
Tests are added for the new flag.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 16:38:00 +0530] rev 3641
evolve: don't allow updating or commiting when there is interrupted evolve
We should make things simple in the starting and restrict user from doing things
which can lead to problems.
This is same as the rebase behavior.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:47:49 +0530] rev 3640
evolve: internationalize the entry of --list in hg evolve help
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:37:10 +0530] rev 3639
evolve: add evolvestate as an argument to _finalizerelocate()
This will help us to store bookmark changes to evolvestate to revert them in
case when `hg evolve --abort` is called.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:33:54 +0530] rev 3638
evolve: add evolvestate as an argument to evolvecmd.relocate()
This will help us in passing it to _finalizerelocate() and store the bookmark
changes which happend.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:13:08 +0530] rev 3637
tests: add test about handling phase-divergent merges
We don't handle phase-divergent merges and we should. Upcoming patches will add
the ability to handle them.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 14:11:13 +0530] rev 3636
evolve: show a message when evolution leads to no changes to commit
In case of orphan resolution, evolution may result in no changes to commit. This
patch adds a use message in such cases. This is same as the rebase behavior.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 13:48:34 +0530] rev 3635
evolve: pass the instability category to relocate() and _finalizerelocate()
This patch adds category argument to relocate() and _finalizerelocate()
functions to take the type of instability which we are processing so that we
perform actions accordingly.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 12:56:35 +0530] rev 3634
tests: add more tests for solving phase-divergence using `hg evolve`
This patch adds more tests for resolving phase-divergence caused due to fold or
split using `hg evolve` command. The resolution in case of split is not very
good and will be fixed in upcoming patches
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 24 Mar 2018 17:21:42 +0530] rev 3633
evolve: handle interrupted phase-divergence resolution gracefully
This patch adds logic to handle the interrupted phase-divergence resolution by
`hg evolve` command gracefully. We first complete the relocation of the
changeset and then do the divergence resolution. Previous functions moved
required code separate fucntions so that we can use them here.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 24 Mar 2018 16:41:14 +0530] rev 3632
evolve: move logic to resolve phase-divergence in a new function
This patch moves logic which does the revert and create a commit on top of
public changeset because we need to repeat that logic while handling
continuation of `hg evolve` when there are conflicts while rebasing the
phase-divergent changeset.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 24 Mar 2018 16:38:03 +0530] rev 3631
evolve: store the precursor of phase-divergent in evolvestate
This patch makes `hg evolve` store the precursor of phase-divergent changeset in
evolvestate so that we don't need to calculate that again.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 24 Mar 2018 13:17:05 +0530] rev 3630
evolve: move logic to complete interrupted relocation to new fn
This moves logic which completed the interrupted relocation to it's own separate
function as we will need that function in continuing phase-divergence and
content-divergence too.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 24 Mar 2018 12:58:12 +0530] rev 3629
evolve: move logic to complete interrupted orphan resolution to new fn
This patch moves logic which completes an interrupted orphan resolution to it's
own new function. We will defining such functions for completing
phase-divergence and content-divergence too.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 19:36:08 +0530] rev 3628
evolve: write data to evolvestate in case on conflicts in phase-divergence
This patch makes phase-divergence resolution write data to evolvestate instead
of graftstate. The `evolve --continue` handling of phase-divergence is broken
which will be done in upcoming patches.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 19:16:25 +0530] rev 3627
evolve: explicitly turn revs to list before storing into evolvestate
The cbor library which we are using cannot handle encoding and decoding Python
sets, and revs was set there. Let's convert revs explicitly to list to make sure
we don't try writing sets.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 18:58:19 +0530] rev 3626
tests: add tests of content+parent change creating phase-divergence
This patch adds tests which shows handling of phase divergence cases by `hg
evolve` command which involved content+parent change. The conflicts case is not
handled and will be fixed in upcoming patches.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 18:28:37 +0530] rev 3625
tests: show first line of commit message in test-evolve-phase-divergence.t
This patch adds 'firstline' filter to description in the log template.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 17:49:26 +0530] rev 3624
evolve: make sure bookmarks are moved after phase-divergence resolution
This patch adds logic to move bookmarks from the rebased node to the
phase-divergence resolved node.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 17:46:46 +0530] rev 3623
evolve: use the new rebased changeset to resolve phase-divergence
When there is a parent change in phase-divergence, `hg evolve` first rebases the
diveregent changeset on parent of public changeset and then continue the
resolution of phase-divergence *but* we used to continue with the old divergent
changeset rather than the new rebased one.
This patch makes sure we use the new rebased changeset to proceed with the
resolution. Tests changes shows that it fixes things which were broken earlier.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 17:21:09 +0530] rev 3622
evolvecmd: add a detailed comment and some newlines
This patch adds a detailed comment on a chunk and some newlines to make things
look better and more understandable for upcoming patches.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 17:20:20 +0530] rev 3621
tests: add one more test case about handling of phase-divergence by evolve
This patch adds a test case when phasedivergence is caused by rebase command and
there is parent change involved. As the tests show, we are not handling things
correctly here. Upcoming patches will fix that.
Fixing things in later patches showed there was a wrong case in one another
test which will be fixed by later patches, so let's add description on why that
test is wrong in this patch.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 15:27:26 +0530] rev 3620
tests: add more tests for handling of phase divergence by `hg evolve`
This patch adds more tests related to handling of phase-divergence by `hg
evolve` command.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 13:16:42 +0530] rev 3619
tests: temporary delete the merge test of handling phase divergence
This patch temporary deletes the merge test of handling phase divergence by `hg
evolve` command to that other important tests can be plugged in before this.
This will make adding more tests easy. As I say, this is temporary to ease out
adding more tests, the test will be added back.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 30 Mar 2018 19:38:55 +0200] rev 3618
tests: various comment on test-evolve-phase-divergence
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 30 Mar 2018 19:37:06 +0200] rev 3617
tests: make test-evolve-phase-divergence more descriptive
This patch adds description to what each part is doing in
test-evolve-phase-divergence.t and some commands which should be used to analyze
the divergence before resolving that.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 30 Mar 2018 20:26:54 +0200] rev 3616
compat: use updateresult API if available
The status return is no longer a tuple, we access attribute instead.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 30 Mar 2018 20:13:06 +0200] rev 3615
compat: provide an explicit default value to the 'odiff' config
There is a devel warning about this now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 29 Mar 2018 19:47:48 +0200] rev 3614
compat: keep passing arguments as keyword argument
Otherwise, This break with new changes in upstream Mercurial.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 29 Mar 2018 18:34:32 +0200] rev 3613
compat: search for stringmatcher in the new location
More of util has been split into sub modules.
Boris Feld <boris.feld@octobus.net> [Thu, 29 Mar 2018 14:13:13 +0200] rev 3612
rebase: update the rebase wrapping to works with hg 4.6
Mercurial core commit bd0086bd3af4 removed _makeextrafn hence breaking our
wrapping. Update the code to wrap rebaseruntime directly in a way that's
compatible with hg 4.1+.
Martin von Zweigbergk <martinvonz@google.com> [Fri, 23 Mar 2018 09:08:21 -0700] rev 3611
compat: call current obsolete.createmarkers(), not one from load time
Other extensions may wrap obsolete.createmarkers(). If they do, we
should call their wrapped version. However, since f61a23a84dac
(compat: add wrapper for obsolete.createmarkers() that accepts
"operation" arg, 2018-03-16), we started storing the version of the
function as it was when our compat module was loaded. This broke an
extension we use internally at Google.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 12:44:06 +0530] rev 3610
tests: rename test-evolve-bumped to test-evolve-phase-divergence.t
While I was here, I added a heading to test mentioning what the test if for.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 12:39:00 +0530] rev 3609
evolve: replace bumped in function name to phasedivergence
bumped was the old name of phasedivergence. Lets replace with its new name so
that we can forget the old one.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 23 Mar 2018 12:35:37 +0530] rev 3608
evolve: drop duplicate import of rewriteutil._bookmarksupdater
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 10:39:18 +0100] rev 3607
obslog: more 4.1 code compatibility drop
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 10:38:01 +0100] rev 3606
template: drop some 4.1 compatibility code
Simplify all the things.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 10:35:27 +0100] rev 3605
checkheads: drop upstreamed code
Mercurial 4.2 has all the code that used to live in the evolve extensions so we
can drop it now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 10:34:44 +0100] rev 3604
obslog: cleanup patch handling after 4.1 compat drop
We can remove some of your compatibility code.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 10:25:01 +0100] rev 3603
packaging: further mark 4.1 support as dropped
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 10:05:50 +0100] rev 3602
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 09:53:42 +0100] rev 3601
tests: extend the globing to the user name
Silly me.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 01:20:03 +0100] rev 3600
branching: close mercurial-4.1 test branch
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 15 Mar 2018 00:09:24 +0530] rev 3599
evolve: kill `--obsolete` and `--old-obsolete` flags for graft
Evolve extension used to add the couple of flags to `hg graft` command for
reasons I don't know but they were deprecated. For the functionality of `hg
graft --old-obsolete`, we have `hg grab` now which can do that.
One more reason to kill this is that we have logic to parse the graftstate,
whereas in core, we are going to change how state files are read and write.
Tweaked the tests a bit to use `hg grab` instead of these flags to make rest of
the test output consistent. Replaced an entry of `hg graft -O` in doc by `hg
grab`.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 00:56:48 +0100] rev 3598
compat: drop support for Mercurial 4.1
This version is over 1 year old and we are dropping support for it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 00:50:11 +0100] rev 3597
packaging: mark versiond as devel versions
This will help prevent confusion when installing a non-tagged version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 00:49:04 +0100] rev 3596
packaging: merge stable back into default
Version have been released.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 00:47:09 +0100] rev 3595
packaging: mark version as devel version
This will help prevent confusion when installing non-tagged version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 22 Mar 2018 00:45:47 +0100] rev 3594
Added tag 7.3.0 for changeset e4ac2e2c2086
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 16:35:18 +0100] rev 3593
test-compat: merge mercurial-4.2 into mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 16:32:54 +0100] rev 3592
test-compat: merge mercurial-4.3 into mercurial-4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 16:18:31 +0100] rev 3591
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 16:06:17 +0100] rev 3590
test-compat: merge stable into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 16:03:46 +0100] rev 3589
branching: merge future 7.3.0 into stable
Release belong to stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 15:57:53 +0100] rev 3588
tests: update test output for the stable branch
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 15:34:29 +0100] rev 3587
debian: add version 7.3.0 to changelog
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 15:32:59 +0100] rev 3586
packaging: update version numbers
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 15:30:06 +0100] rev 3585
changelog: prepare release 7.3.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 15:36:10 +0100] rev 3584
tests: updated tested with version
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 21 Mar 2018 17:03:55 +0530] rev 3583
__init__: show some internationalization love
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 21 Mar 2018 17:04:41 +0530] rev 3582
evolvecmd: show some internationalization love
Some outputs are not internationalized because I doubt that they are gonna stay
here for long.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 21 Mar 2018 16:52:46 +0530] rev 3581
utility: make sure prompt text is internationalized
This patch internationlize the prompt text by passing the into mercurial.i18n._
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 17:59:15 +0100] rev 3580
test: do not use revision number
This get confused with older version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 19:30:51 +0100] rev 3579
compat: use mergetoolopts from commands.py
Mercurial <= 4.2 do not have cmdutils.py yet.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Mar 2018 15:24:51 +0100] rev 3578
branching: merge stable into default
Some bugfix that we could use here (also getting ready for a release).
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 20 Mar 2018 18:41:31 +0530] rev 3577
evolve: add a `--stop` flag for `hg evolve` command
This patch adds a `--stop` flag for `hg evolve` command. The stop flag lets you
stop the evolution from where you are and let you move to other things if you
want. This fuctionality is great as user can decide to resolve conflicts later
on, stop the command execution, do something else and get back once they has
time or care about resolving them.
As implementation details, it clears the evolvestate, updates to the parent of
working directory clearing the uncommitted changes which also deletes the
mergestate.
A new test file test-evolve-stop.t is added with tests of the new flag added.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 19 Mar 2018 15:20:40 -0700] rev 3576
obsexchange: make compatible with some unreleased 4.5 versions
We don't generally care to be compatible with unreleased versions of
hg, but this is just a one-line change to be compatible with a range
of commits before 158d4ecc03c8 (wireprotoserver: move all wire
protocol handling logic out of hgweb, 2018-03-08), so hopefull it can
be worth it.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 19 Mar 2018 15:46:17 -0700] rev 3575
compat: make override of createmarkers work on wrapped function
If createmarkers() has been wrapped using functools.partial(), the
__code__ attribute won't exist. Fix by unwrapping partial functions. I
tried to find another attribute to use as proxy for the
"__code__.co_argcount < 6", but there were no new functions or similar
added in that commit.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 19 Mar 2018 11:18:47 -0700] rev 3574
previous/next: add -m short form for --merge
This matches core's option to `hg update`.
This patch also covers `hg next`, but test-check-commit.t only lets me
mention one of them.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 18 Mar 2018 17:29:32 +0530] rev 3573
evolve: handle stabilization of merge changeset with both parents obsoleted
This patch adds logic to stabilize an orphan merge changeset having both parents
obsoleted.
The logic tries to first stabilize the merge changeset on successor of second
parent and then stabilize the new changeset formed on the successor of first
parent. We are stabilizing on second parent first and then to second parent to
preserve the first parent's successor as first parent of the merge changeset.
Conflicts can occcur and we can loose processing information, therefore we store
a variable in statefile `orphanmerge` which represents whether we are processing
a merge changeset with both parents obsoleted.
Thanks to Pierre-Yves David for suggesting this way and helping to understand
the correctness of this.
More rigourous test cases for this will be added in next patch.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 19 Mar 2018 13:11:55 +0530] rev 3572
state: add __setitem__() for cmdstate class
Adding __setitem__() will help us in setting the value of variables stored in
state files using `state[key] = value` in our code which is very convenient.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 19 Mar 2018 12:58:31 +0530] rev 3571
evolve: preserve the order of merge parents in `hg evolve --continue`
This patch makes sure we preserves the order of merge parents in case of `hg
evolve --continue`.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 15:41:51 -0700] rev 3570
topics: include "operation" metadata in obsmarkers
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 15:51:43 -0700] rev 3569
grab: include "operation" metadata in obsmarkers
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 15:51:34 -0700] rev 3568
touch: include "operation" metadata in obsmarkers
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 15:51:26 -0700] rev 3567
split: include "operation" metadata in obsmarkers
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 15:51:17 -0700] rev 3566
prune: include "operation" metadata in obsmarkers
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 15:51:07 -0700] rev 3565
metaedit: include "operation" metadata in obsmarkers
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 15:50:59 -0700] rev 3564
fold: include "operation" metadata in obsmarkers
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 15:50:45 -0700] rev 3563
uncommit: include "operation" metadata in obsmarkers
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 15:40:28 -0700] rev 3562
evolve: include "operation" metadata in obsmarkers
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 15:50:25 -0700] rev 3561
amend: include "operation" metadata in obsmarkers
This is for the legacy handling support for "hg commit --amend"
case. I picked "amend" because it feels more natural than
"commit". Besides, and more importantly, that's consistent what core
uses.
Martin von Zweigbergk <martinvonz@google.com> [Fri, 16 Mar 2018 10:22:27 -0700] rev 3560
compat: add wrapper for obsolete.createmarkers() that accepts "operation" arg
I want to start passing the operation argument, but hg < 4.3 does not
support it, so we need a compat wrapper. For older hg, the operation
is simply ignored.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 12 Mar 2018 23:26:25 -0700] rev 3559
tests: do not glob out fixed dates
Perhaps these dates historically have not been fixed, but they seem to
be now. I got tired of not being able to use "run-tests.py -i".
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 17:00:01 +0530] rev 3558
evolve: de-duplicate some function calls
_cleanup() was called in continueevolve() and evolve() function too. Let's call
it at a single place for both the cases. Also call progresscb() outside of
conditionals to call it both times.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 16:11:22 +0530] rev 3557
evolve: move deletion of evolvestate out of continueevolve() function
We need to extract some data at evolve() function from evolvestate.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 16:04:28 +0530] rev 3556
evolve: load evolvestate before passing to continueevolve()
This patch moves some code from continueevolve() to evolve() function so that we
have a loaded evolvestate present in the evolve() function for post processing.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 15:56:05 +0530] rev 3555
evolve: move the handling for non-continue part in else conditional
This will help us do factor out which operations we want to do for continue,
which for non-continue and which operations we want to do for both of them.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 14 Mar 2018 21:21:10 +0530] rev 3554
evolve: move the logic of continuation handling of `hg evolve` in own fn
The function which defines the evolve command is pretty big with all the logic
messed up there. It's better to have individual functions for individual uses.
The movement of code will help in adding more logic to continue part in clean
way. Moreover for implementing `hg continue`, we need all continuation handling
in their own functions, so it will help there too.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 15:24:56 +0530] rev 3553
CHANGELOG: add an entry about next and prev being interactive
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 13:24:57 +0530] rev 3552
prev: show changeset hash in --dry-run instead of rev numbers
rev numbers can change, so it's better to show changeset hash.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 13:13:21 +0530] rev 3551
prev: prompt user to choose parent in case of multiple parents
This patch adds functionality to `hg prev` to prompt user to choose one parent
to update when multiple parents exist.
Surprisingly there were no tests for this case before this patch, I added one
with this patch.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 12:48:03 +0530] rev 3550
next: cleanup logic around return by returning early
In the cmdnext function, there are some conditionals which returns early and
some which sets a result value to be returned later. Let's return from all the
conditionals early.
There are if, elif and else involved, so it's sure we will end up in one of the
conditional, each conditional will return, so it's guranteed that we are
returning the correct value and returning everytime.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 12:14:39 +0530] rev 3549
next: prompt user to choose child in ambiguity in `hg next --evolve`
This patch makes `hg next --evolve` prompt user to choose a child to evolve and
update when multiple of them exists. This is improvement over previous behavior
where we used to error out saying ambiguous next unstable changeset and told
user to manually use `hg evolve -r rev`. While writing this patch, I am
personally very happy to have this feature as I have encountered this stage many
times and I wanted `next --evolve` to take care of that.
It uses the revselectionprompt thing added in earlier patches.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 11:56:50 +0530] rev 3548
next: move logic to evolve the children to it's own function
This patch moves the logic which evolves the children and updates to it in `hg
next --evolve` to it's own function as we want to use that again.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 11:46:47 +0530] rev 3547
next: prompt user to choose a children in case of ambiguity
This patch adds functionality to prompt user and ask the children to which next
should move to incase of multiple childrens. This is a very nice UI because
otherwise user has to lookup changeset hash, and then manually do `hg update` to
that. In this case we show hash and description so user can choose which one to
update easily.
It is using the interactive revision choosing functionality added in a previous
patch.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 11:31:13 +0530] rev 3546
next: show changeset hash in `--dry-run` instead of rev numbers
Rev numbers can change, hence we should show rev hash instead of rev numbers in
dry-run.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 18 Mar 2018 01:27:02 +0530] rev 3545
evolve: make sure we consider all cases in if-else
The part of code which is touched decides on evolution of merge changeset. We
need proper handling of each case there, so before adding logic, let's add
conditional for each case so that upcoming patches are easy to understand.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 19 Mar 2018 14:03:41 +0100] rev 3544
tests: add more cases about stabilization of an orphaned merge commit
This patch adds three more cases related to stabilization of orphaned merge
commits.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Mar 2018 13:47:07 +0100] rev 3543
evolve: fix missing negation
Spotted by Pulkit Goyal.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 19 Mar 2018 12:01:07 +0100] rev 3542
evolve: clarify message for ambiguous destination from split
Message is a bit long, but should be less scary.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 14 Mar 2018 18:24:22 +0530] rev 3541
evolve: prompt user to select destination for stabilization in case of split
This patch adds functionality to prompt user to select a revision when there
exists multiple stabilization destination because of split on multiple branches.
Test are also added for the feature.
I am not sure whether this is the best message which we can show, if people have
suggestions I will like to improve the messages shown in prompt.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 14 Mar 2018 18:36:35 +0530] rev 3540
tests: remove some tests which are moved to dedicated files
The tests in test-unstable.t files are now moved to their dedicated file with
all the cases to that in that file. Let's delete them from here.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 11:24:35 +0530] rev 3539
next: factor out the logic to update to changeset in another function
This patch moves the logic to update to children changeset during `hg next` in a
separate function because we want to re-use the logic when we will prompt user
to choose a changeset in case of multiple childrens.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 14 Mar 2018 17:59:53 +0530] rev 3538
utility: add a function to prompt user to choose a revision
This patch adds a utility function to interactively prompt user to choose a
revision to proceed in cases when there are multiple revisions which are
candidates.
The function will be used in `hg evolve`, `hg next`, `hg prev` etc. If user
feedback will be good, I plan to move it to core and use it at more possible
places.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 14 Mar 2018 17:20:20 +0530] rev 3537
tests: add a test about evolve stabilizing orphan caused by splits
There are some similar tests lying around in the test suite but they are not
well arranged. I wanted the test suite to be a goto reference for all the
behaviors till the time we get all of them documented.
Boris Feld <boris.feld@octobus.net> [Mon, 19 Mar 2018 11:36:55 +0100] rev 3536
test: fix output after rev-branch-cache has been merged
Mercurial core 2090044a288d added a new revbranchcache part which changed some
exchange-related outputs. Glob them to ease merging with old Mercurial
versions branches.
Martin von Zweigbergk <martinvonz@google.com> [Fri, 16 Mar 2018 09:13:33 -0700] rev 3535
cleanup: remove duplicate import of "obsolete"
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 15:21:05 +0530] rev 3534
previous: fix behavior on obsolete cset when topic is involved (issue5708)
This patch fixes the behavior of `hg previous` when done on an obsolete
changeset having a successor of different topic.
The underlying code is bit messed up, I wanted to split the topic handling to
topic extension but I have postponed it to next bug.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 15:15:17 +0530] rev 3533
previous: add test case when it's broken on obsolete cset
This patch adds couple of tests showing `hg previous` is broken on obsolete
changeset when the successor has different topic. Upcoming patch will fix this.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 15:01:44 +0530] rev 3532
prev: fix the breakage of `hg previous` from obsolete cset
This patch fix the breakage of `hg prev` from obsolete changeset when topic is
involved. We get the topicidx of it's succesor and proceed.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 16 Mar 2018 14:59:10 +0530] rev 3531
prev: add a test case which shows traceback when doing prev on obsolete cset
This patch adds a test which shows how `hg prev` is borken when called from a
obsolete changeset and there is an active topic. The next patch will fix that.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 13 Mar 2018 19:06:14 +0530] rev 3530
tests: add more tests related to stabilization of orphaned merge commit
This patch more tests related to stabilization of orphaned merge commit.
Stabilization of a merge changeset with both the parents is not supported right
now and prints a message on how to do that. Maybe we should do that internally
as a part of `hg evolve` but I need to think about this.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 13 Mar 2018 18:17:50 +0530] rev 3529
evolve: fix stabilization of orphan merge changesets in case of conflicts
As demonstrated by tests added in previous patch, if one of the parent of a
merge changeset has a new version and merge changeset gets, running `hg evolve`
to stabilize that if results in conflicts will lead to lose of other parent of
that merge changeset when we resolve conflicts and do `hg evolve --continue`.
This patch fixes the behavior, by checking whether we are continuing evolving a
merge changeset and if yes, setting the dirstate parents according to that.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 13 Mar 2018 15:29:35 +0530] rev 3528
tests: add a test file of resolving orphaness of merge changesets
This patch adds a new test file named test-evolve-orphan-merge.t which contains
test cases when `hg evolve` try to stabilize a merge changeset which was orphan.
This file contains 20-30% of all the cases as we have got something to fix
before we add tests for rest of the cases. Going by this approach will make sure
we don't live unfixed cases in the test file and the test files does not become
a pile of hacks which are used to get in state when we fix the bugs.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 13 Mar 2018 20:44:51 +0530] rev 3527
grab: gracefully handle the case when we try to grab parent of wdir
Before this patch, we go all the way down to obsmarker creation logic and gets
an error saying that changeset cannot obsolete itself. We should be more smart
here and error out early saying we cannot grab that changeset.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 03 Mar 2018 23:31:46 +0530] rev 3526
grab: move the initialization of pctx variable outside of if-else
The pctx variable is used outside of the if-else but it was initialized
under the conditional statements.
Added test for the case when the initialization inside the if-else broke `hg
grab --continue`.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 14 Mar 2018 02:32:08 +0100] rev 3525
compat: drop hack around http request handling for 4.6
The approach we used in 4.5 works again :-)
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 14 Mar 2018 02:08:53 +0100] rev 3524
obsdiscovery: add compatibility layer to register wireproto command
Mercurial core 0b18604db95e changed the way permissions are registered.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 14 Mar 2018 02:21:07 +0100] rev 3523
compat: pass all hgweb dispatch argument to the orig function
This make use compatible with whatever changes on this side.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 07 Mar 2018 00:00:02 -0500] rev 3522
grab: add short version for continue and abort
Anton Shestakov <av6@dwimlabs.net> [Fri, 23 Feb 2018 20:27:17 +0800] rev 3521
obsdiscovery: include units in ui.progress() calls (issue5773)
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 04 Mar 2018 20:19:19 -0500] rev 3520
tests: commit tests changes missing in the previous changeset
(guess who forgot to amend)...
Boris Feld <boris.feld@octobus.net> [Sun, 04 Mar 2018 11:34:49 -0500] rev 3519
obslog: add the operation to the Obslog output
The operation is helpful when debugging a case where we don't know how we
ended up in this case while effect-flag are useful to understand what semantic
changes happens to a changeset.
Add the operation when displaying an obs-marker in the following form:
`rewritten as X using amend`
The other proposal is interesting but seems harder to internationalize and
might requires update each time we introduce new operation:
`Amended as X`
Let's use the first proposal right now.
Sean Farley <sean@farley.io> [Tue, 19 Dec 2017 13:15:00 -0600] rev 3518
serverminitopic: attempt to fix assertion for repoview in branchmap
This seems fine since we topic never impact public only caches.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 04 Mar 2018 17:41:45 -0500] rev 3517
compat: register a version of 'obsfatedata' template that works with 4.6
Since showlist is deprecated, let us use compatlist.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 04 Mar 2018 17:09:41 -0500] rev 3516
compat: register a version of 'troubles' template that works with 4.6 API
Since showlist is deprecated, let us use compatlist.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 04 Mar 2018 17:07:53 -0500] rev 3515
exthelper: add support for "requires" argument for template keyword
This will help use to support the new template API.
Boris Feld <boris.feld@octobus.net> [Sat, 03 Mar 2018 23:17:26 -0500] rev 3514
compat: add compat layer for date related functions
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 03 Mar 2018 22:25:24 -0500] rev 3513
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 03 Mar 2018 22:12:35 -0500] rev 3512
compat: more straight forward alias for old template names
The template registration have significantly changed in core:7b74afec6772. We
take simpler approach to define the alias in a way that works for all versions.
Sean Farley <sean@farley.io> [Tue, 05 Dec 2017 20:45:46 -0800] rev 3511
serverminitopic: fix wrong object being passed to phase
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 02 Mar 2018 19:33:20 -0500] rev 3510
legacy: respect explicit config for server.bundle1
Unconditionally disabling bundle1 is a problem for larger hosting website. We
adopt a less aggressive approach and only disable it the default would be used.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 02 Mar 2018 16:31:08 -0500] rev 3509
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 02 Mar 2018 16:30:48 -0500] rev 3508
compat: only wrap wireprotoserver function if they exist
Older version does not need the wrapping so everything should be fine.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 02 Mar 2018 16:07:33 -0500] rev 3507
pure: make sure what we expect to be list are list
In the pure version, some of these object would be generator.
Boris Feld <boris.feld@octobus.net> [Mon, 26 Feb 2018 13:59:30 +0100] rev 3506
evolve: update code for not implicitly converting ctx to revision
Mercurial core 38f480502043 removed the capacity to implicitly convert
contexts to revisions using `int(ctx)`. Update Evolve code to explicitly call
rev instead.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 23 Feb 2018 11:02:59 +0100] rev 3505
legacy-push: fix the code forbidding legacy obsmarkers pulling
changeset e69e65b2b4a9 in code remove a key try/except. We reintroduce it for
compatibility.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 21 Feb 2018 17:45:50 +0100] rev 3504
updatecaches: handle any new parameters to the method
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 07 Feb 2018 13:42:30 +0530] rev 3503
evolvecmd: fix broken `evolve --continue` ran after `next --evolve`
Recent series broke `evolve --continue`in cases when run after `hg next
--evolve`. The previous patch adds test demonstarting the broken behaviour, this
patch fixes that by storing the command which leads us to evolve --continue in
the evolvestate.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 07 Feb 2018 22:41:30 +0530] rev 3502
tests: add test showing `evolve --continue` after `next --evolve` is broken
Recent series fixing `hg evolve --continue` break the continue functionality
after a conflicting `hg next --evolve`. This patch adds a test to demonstrate
that. It will be fixed in the upcoming patch.
Boris Feld <boris.feld@octobus.net> [Wed, 17 May 2017 09:39:15 +0200] rev 3501
color: add some colors to evolve command itself
Boris Feld <boris.feld@octobus.net> [Wed, 14 Feb 2018 14:53:43 +0100] rev 3500
wireproto: fix *_capabilities for change of API types
Mercurial commit 2f7290555c96 introduced new types for *_capabilities, update
the code to use them.
Boris Feld <boris.feld@octobus.net> [Wed, 14 Feb 2018 09:46:56 +0100] rev 3499
obsfate: fix changeset description diff computing
Mercurial core 8b6dd3922f70 changed the mdiff.unidiff API. Add a new compat
method for all supported Mercurial versions.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 30 Jan 2018 15:11:35 +0530] rev 3498
evolve: add comptability to read old evolvestate files
When a user runs `hg evolve` with old evolve where we used to write evolvestate
the old ways i.e. without using cbor, and faces conflicts, the evolve is
interrupted. If the user updates evolve before completing the evolve, that can
result in traceback as the new evolve cannot read the old evolvestate file.
The previous patch added function to read old evolvestate file and this patch
uses that when we encounter the above mentioned case.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 30 Jan 2018 15:02:40 +0530] rev 3497
state: bring back the function to read old evolvestate files
Before introduction of this nice cmdstate file wrapper, we had individual
methods to write data to evolvestate file. Let's bring back the function which
used to read data from the old evolvestae file so that we can use it in next
patch for BC purposes.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 30 Jan 2018 00:02:29 +0530] rev 3496
evolve: add entry in CHANGELOG about fixed behavior of `hg evolve --continue`
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 30 Jan 2018 00:00:45 +0530] rev 3495
evolve: store the skippedrevs in evolvestate
While doing `hg evolve`, there are some revs which are skipped as they can't be
evolved. Before this patch, we did not store this information in evolvestate and
neither they were evolved, so `hg evolve --continue` will again try to stabilize
those revisions. As much time as we run `hg evolve --continue`, this will
happen which is not a good behavior.
This patch adds a skippedrevs list to evolvestate where we store such revisions
so that we don't try to stabilize them again.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 29 Jan 2018 00:09:44 +0530] rev 3494
evolve: show the updated working directory after `hg evolve --continue`
`hg evolve` shows a nice message about the new working directory when the evolve
ends but if the evolve is interrupted by conflicts and you continue the evolve
resolving the conflicts, that nice message is lost. Let's have that in case of
`--continue` too.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 28 Jan 2018 23:49:46 +0530] rev 3493
evolve: make `hg evolve --continue` respect `--confirm`
Previous patch added capability to `hg evolve --continue` to continue the rest
of the stack, not just the current revision but that was missing respecting the
`--confirm` flag which user passed earlier. This patch makes sure we respect the
`--confirm` flag.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 24 Jan 2018 13:20:18 +0530] rev 3492
evolve: make `--continue` continue evolving all remaining revisions
This patch makes `hg evolve --continue` to continue all remaining revisions
instead of just the current conflicted one.
There are some still improvements required to this behavior after which the
CHANGELOG entry will be added.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 04 Feb 2018 20:58:03 +0530] rev 3491
tests: add more tests to test-evolve-continue.t
This patch adds more tests for `hg evolve --continue`. The tests demonstrates
how the continuation handling of hg evolve is broken and the later patches fixes
that handling.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 Jan 2018 18:52:27 +0530] rev 3490
evolve: handle case when newnode can be None while continuing evolve
There can be case when `hg evolve --continue` is run, when working directory is
clean and there is nothing to be included in the new commit. Let's make sure we
handle such cases correctly and obsolete the node which is evolved with parent
of wdir as successor. This is same as what rebase does.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 28 Jan 2018 19:28:08 +0530] rev 3489
tests: add tests for `hg evolve --continue`
This patch adds a new test file containing tests for `hg evolve --continue`.
The test file still does not contains all the tests related to `hg evolve
--continue` as one of the case is broken which needs to be fixed first. The case
is when resolving a conflicting evolve results in empty wdir.
Next patch will fix the traceback and then a later patch will add more tests.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 06 Feb 2018 13:00:28 +0100] rev 3488
merge with stable
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 04 Feb 2018 21:05:03 +0530] rev 3487
CHANGELOG: add an entry about resolve showing how to continue evolve
Matt Harbison <matt_harbison@yahoo.com> [Sun, 21 Jan 2018 16:55:02 -0500] rev 3486
test: explicitly run HGEDITOR shell command with `sh`
Otherwise Windows pops up the "What program do you want to use to open this?"
dialog.
Matt Harbison <matt_harbison@yahoo.com> [Sun, 21 Jan 2018 16:46:31 -0500] rev 3485
test: conditionalize blackbox output for Windows
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 05 Feb 2018 14:36:34 +0100] rev 3484
branching: merge with stable
Yuya Nishihara <yuya@tcha.org> [Mon, 05 Feb 2018 20:58:46 +0900] rev 3483
compat: add wrapper for logcmdutil functions
These classes and functions were bulk-renamed at hg c8e2d6ed1f9e.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 Jan 2018 18:35:50 +0530] rev 3482
evolve: store the revs to be processed in the evolvestate
This will help us in getting a full functional `hg evolve` where `hg evolve
--continue` does not only continue one changeset.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 Jan 2018 18:18:11 +0530] rev 3481
evolve: store the replacements in the evolvestate
This will greatly help when we will be implementing `hg evolve --abort`.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 Jan 2018 18:13:52 +0530] rev 3480
evolve: store the target category in evolvestate
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 Jan 2018 17:54:27 +0530] rev 3479
evolvecmd: use the evolvestate object passed as argument in _solveunstable
Earlier if get a merge conflict, we used to initialize a new evolvestate object
and used to save it. Let's start using the state object which we get in as
argument as that will contain more data about the state.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 Jan 2018 17:44:57 +0530] rev 3478
evolvecmd: pass evolvestate object to _solve* functions
This patchs adds an argument evolvestate to _solve* functions. This will help us
in having one evolvestate object which we can pass around various functions and
keep storing what's going on.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 Jan 2018 17:29:56 +0530] rev 3477
evolve: create a state object in all case
Let's create a state object even when we are not in the continue mode. This will
help us passing the state object to rest of the functions.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 04 Feb 2018 14:29:18 +0100] rev 3476
branching: merge with stable
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 02 Feb 2018 13:59:33 +0530] rev 3475
grab: preserve phase of the grabbed changeset
This patch fixes the wrong behavior of loosing secret phase of the grabbed
changeset.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 02 Feb 2018 13:45:47 +0530] rev 3474
tests: add a test showing grabbing of secret changeset turn it into draft
This patch adds a test showing wrong behavior of `hg grab` command which looses
the secret phase while grabbing a secret changeset.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 02 Feb 2018 15:37:00 +0530] rev 3473
grab: add grab info to cmdutil.afterresolvedstates
This will help us in showing how to continue the grab when user resolves all the
conflicts.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 27 Jan 2018 21:15:27 +0530] rev 3472
evolve: add evolve info to cmdutil.afterresolvedstates
Adding evolve info to cmdutil.afterresolvedstate will improve the ui when we run
into merge conflicts while evolving. Once we resolve all the conflicts using `hg
resolve`, this will show a message saying "continue: hg evolve --continue".
Other extensions like rebase and shelve also use it and it's very helpful.
Boris Feld <boris.feld@octobus.net> [Mon, 29 Jan 2018 17:32:08 +0100] rev 3471
doc: add link to roadmap
Add a link to the Evolution roadmap in the main page of the documentation.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 Jan 2018 19:32:34 +0530] rev 3470
evolve: move the evolve command to evolvecmd.py
This patch moves finishes the code movement by moving the evolve command to
evolvecmd.py.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 21 Jan 2018 20:33:39 +0530] rev 3469
evolve: move _orderrevs() function evolvecmd.py
_orderrevs() is a function which is used to order the revs in which the
instability needs to be solved if we have multiple revisions to resolve.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 21 Jan 2018 20:28:06 +0530] rev 3468
evolve: move builddependencies() and _singlesuccessor() to utility module
The builddependencies() and _singlesuccessor() function are very useful
functions and can be used at a lot of places. They are also used in topic
extension also, so let's move them to utility. However moving them to utility
won't help anything in the topic extension.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 Jan 2018 17:29:48 +0530] rev 3467
utility: move MultipleSuccessorsError from __init__.py
The MultipleSuccessorsError is required in multiple modules in upcoming patches,
so let's move it to utility first.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 Jan 2018 16:44:00 +0530] rev 3466
evolvecmd: move more core from __init__.py to evolvecmd.py
We are done with moving helper code, we will now be moving the evolve command in
the new module.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 Jan 2018 16:00:21 +0530] rev 3465
evolvecmd: move code from __init__.py to evolvecmd.py
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 Jan 2018 15:55:38 +0530] rev 3464
evolvecmd: move more code from __init__.py to evolvecmd.py
We are now very close to have most of the evolve related code in evolvecmd.py.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 Jan 2018 15:22:28 +0530] rev 3463
evolvecmd: move more chunks of code from __init__.py to evolvecmd.py
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 Jan 2018 15:04:12 +0530] rev 3462
evolvecmd: move more functions from __init__.py to evolvecmd.py
If things are looking ugly, hold on.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 19 Jan 2018 14:42:46 +0530] rev 3461
evolvecmd: introduce a new module to handle `hg evolve` related code
__init__.py is to cluttered with wrapping and all, it's better to move code
related to evolve command to new a module which will help us in great
refactoring and introducing nice and better flow of data through functions.
There is a temporary import cycle is introduced which will be fixed in the
series.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 18 Jan 2018 16:57:19 +0530] rev 3460
evolve: remove not required calls to phases.retractboundary()
To make sure phases are preserved during evolve, we started using the
phases.new-commit config option. Now we don't need to call
phases.retractboundary(). Let's remove the redundant code.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 16 Jan 2018 17:14:32 +0530] rev 3459
evolve: store the replacements occurred during `hg evolve` at top level
This patch starts storing the replacements made during the `hg evolve` command.
The current dictionary is not used anywhere but will be used in future as we
want to introduce abort functionality, so we want to delay writing of
obsmarkers, storing these exchanges in statefile etc.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 27 Jan 2018 16:13:19 +0530] rev 3458
evolve: make the _solve* functions return a tuple
This patch makes _solve* functions return a tuple which will contain information
about whether we were able to solve the instability and if yes, then what was
the newnode. For more details about tuple, look the fn docs added.
There was some refactoring required in next command because of change in return
values. This also leds to omitting the wdir update message in case of dry-run
which is good.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 17 Jan 2018 19:12:32 +0530] rev 3457
evolvestate: rename the file to state.py and class name to cmdstate
The evolvestate.py and the evolvestate class in it were introduced to help `hg
evolve` grow continue and abort options. But the class and it's API can be
easily used to store state information for other state files like we stored the
information for grab state in the previous commit. Let's rename the the file and
class.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 26 Jan 2018 17:55:16 +0100] rev 3456
branching: merge with stable
Martin von Zweigbergk <martinvonz@google.com> [Wed, 24 Jan 2018 09:55:12 -0800] rev 3455
update: show "use 'hg evolve' to..." hint iff evolve command enabled
Before this patch, one had to enable *all* commands (by including
"allnewcommands" in the experimental.evolution config) for the hint to
be shown.
Martin von Zweigbergk <martinvonz@google.com> [Thu, 25 Jan 2018 17:29:21 -0800] rev 3454
obslog: drop period from summary line in accordance with convention
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 11 Jan 2018 20:03:20 +0530] rev 3453
grab: add a command to grab a commit and update to it
This patch adds anew command `hg grab` which will pick a commit and put it on
the top of the working directory parent and updates to it.
Earlier grab was an alias for `hg rebase -r <rev> -d .` which is now deleted to
make sure `hg grab` resolves to the grab command and that alias.
Continuing interrupted grab functionality is also there using the evolvestate
class.
Tests are also added for the new introduced command.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 Jan 2018 14:10:59 +0530] rev 3452
amend: query the wdir parent after taking lock (issue5266)
If we query wdir parent without taking a lock, that can lead to bugs because the
wdir parent can change is another process has changed the wdir parent.
One such example of this was issue 5266. When a user is running amend and that
amend is waiting for commit message, the user runs another amend which waits for
lock. The second amend is waiting for lock, but has already read the description
from the parent of working directory to use. Once the first amend completes the
wdir parent changes but we still have the description from an old wdir parent.
This patch fixes the bug by querying the description after taking lock.
Attempts were made to add test for this but the results were unstable because
they depend on time in which lock is released.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 Jan 2018 13:44:32 +0530] rev 3451
fold: make sure we move bookmarks after folding (issue5772)
The rewriteutil.rewrite() API currently only handles moving bookmark from a old
node to new node. In case on fold, we have multiple old nodes, from where a
bookmark move is possible. The rewriteutil.rewrite() API is used by another
commands also and it's not good to plug in some logic there. This patch handles
bookmark movement from all the old nodes to the new node.
Pulkit Goyal <7895pulkit@gmail.com> [Mon, 22 Jan 2018 13:33:58 +0530] rev 3450
tests: add a test showing bookmark not moving in-case of `hg fold`
This patch adds a test showing that bookmark is not moved when doing `hg fold`.
This test represents issue 5772.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 24 Jan 2018 15:20:29 +0100] rev 3449
branching: merge stable back into default
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 24 Jan 2018 15:19:17 +0100] rev 3448
test: update test output ot reply caps size change
CORE-TEST-OUTPUT-UPDATE: 2e703ed1c713
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 24 Jan 2018 15:11:20 +0100] rev 3447
branching: merge default test output into stable
Mercurial 4.5 has been merged, we update the expected test output.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 24 Jan 2018 15:08:09 +0100] rev 3446
branching: open Mercurial 4.4 compatibility branch
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:55:23 +0100] rev 3445
branching: merge release 7.2.1 into default
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:48:26 +0100] rev 3444
packaging: mark source as development version
This help avoiding consusion
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:53:25 +0100] rev 3443
Added tag 7.2.1 for changeset 6c772398eb4e
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:38:11 +0100] rev 3442
test-compat: merge mercurial-4.2 into mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:38:10 +0100] rev 3441
test-compat: merge mercurial-4.3 into mercurial-4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:38:09 +0100] rev 3440
test-compat: merge stable into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:28:32 +0100] rev 3439
packaging: prepare version 7.2.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:44:02 +0100] rev 3438
branching: merge with tutorial output update
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:28:53 +0100] rev 3437
test-compat: merge mercurial-4.2 into mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:28:52 +0100] rev 3436
test-compat: merge mercurial-4.3 into mercurial-4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:28:40 +0100] rev 3435
test-compat: merge stable into mercurial-4.3
Boris Feld <boris.feld@octobus.net> [Sat, 20 Jan 2018 12:26:39 +0100] rev 3434
tutorial: docgraph output seems to have been dedented
Update the outputs following latest version of docgrpah and its dependencies.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 12:17:06 +0100] rev 3433
test: update output for more verbose blackbox
CORE-TEST-OUTPUT-UPDATE: 853bf7d90804
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 11:59:36 +0100] rev 3432
test: update with new 'update' hint about obsfate
CORE-TEST-OUTPUT-UPDATE: 35a0f6f31eef
Martin von Zweigbergk <martinvonz@google.com> [Sat, 13 Jan 2018 14:35:49 -0800] rev 3431
evolve: update output for wider reporting of troubled changesets
CORE-TEST-OUTPUT-UPDATE: 1a09dad8b85a
Boris Feld <boris.feld@octobus.net> [Fri, 19 Jan 2018 19:18:05 +0100] rev 3430
test: update output for new `merge --abort` message
Core have updated its command to cancel a failed merge, update the test output
to match it.
CORE-TEST-OUTPUT-UPDATE: 41ef02ba329b
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 11:13:21 +0100] rev 3429
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 11:11:48 +0100] rev 3428
changelog: mention 4.5 compatibility
Martin von Zweigbergk <martinvonz@google.com> [Sat, 20 Jan 2018 11:07:18 +0100] rev 3427
trouble-reports: yield to in code reporting of new troubles
Mercurial 4.5 has the feature in core, let core do the reporting in this case.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 19 Jan 2018 20:41:58 +0100] rev 3426
caches: fix automatic warming trigger
The caches were supposed to get warmed when we receive a push. However the
transaction created when we -issue- a push use a similar name and was confusing
the detection.
We now properly detect the case.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 20 Jan 2018 11:02:44 +0100] rev 3425
changelog: mention the packaging bugfix
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 Jan 2018 20:16:26 +0100] rev 3424
packaging: properly install the evolve.thirdparty module
It is properly added to the Manifest.in but that is not enough. We need to find
another tool capable of catching things.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 04:53:09 +0100] rev 3423
branching: merge release tags into default
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 04:50:38 +0100] rev 3422
packaging: mark source as development version
This help avoiding consusion
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 04:48:57 +0100] rev 3421
Added tag 7.2.0 for changeset bf6b859807ba
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 04:41:48 +0100] rev 3420
test-compat: merge mercurial-4.2 into mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 04:38:04 +0100] rev 3419
test-compat: merge mercurial-4.3 into mercurial-4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 04:35:34 +0100] rev 3418
test-compat: merge stable into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 04:32:43 +0100] rev 3417
branching: merge stable back into default
The test change has to be reverted.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 03:35:24 +0100] rev 3416
branching: merge further compat change into stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 02:23:35 +0100] rev 3415
branching: merge further compat change into stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 01:18:05 +0100] rev 3414
branching: merge more compatibility fix into stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 15 Jan 2018 21:47:40 +0100] rev 3413
packaging: merge 7.2.0 into stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 15 Jan 2018 20:45:13 +0100] rev 3412
tests: update test output to match 4.4
The stable branch is sitll 4.4.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 15 Jan 2018 19:52:00 +0100] rev 3411
branching: backed out test output changes from core-1905aac253f0
This backs out evolve-ae6fddf39933
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 15 Jan 2018 19:42:44 +0100] rev 3410
branching: backed out test output changes from core-02fdb8c018aa
This backs out evolve-1905aac253f0.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 03:34:31 +0100] rev 3409
compat: fix argument check for marker reading
The previous check was broken for 4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 02:21:44 +0100] rev 3408
cachevfs: use a compatibility later for all access
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 01:11:47 +0100] rev 3407
diff: drop default argument value
This argument use the default value for an argument not available in earlier
version. So we just stop passing the argument.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 Jan 2018 00:58:02 +0100] rev 3406
test: use hash in test-evolve-topic.t
This helps testing compat with older version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 15 Jan 2018 21:45:46 +0100] rev 3405
packaging: prepare version 7.2.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 15 Jan 2018 21:44:22 +0100] rev 3404
changelog: prepare for coming release
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 15 Jan 2018 20:51:22 +0100] rev 3403
stablerange: add missing licence and copyright header
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 11 Jan 2018 18:07:09 +0530] rev 3402
obshistory: pass the csets description in getmarkerdescriptionpatch
Previous patches removed any use of ctx in the function and we now just need the
cset description in the function. Let's pass that only. This will save couple
of calls of repo[node].
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 11 Jan 2018 17:54:34 +0530] rev 3401
obshistory: remove the unused function
The function is not used anymore.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 11 Jan 2018 17:11:10 +0530] rev 3400
obslog: add header to the changeset description diff
This patch adds `diff -r <hash> -r <hash> <filename>` header to the output of
the changeset description diff which is shown using the --patch flag of obslog
command.
This fixes the label/color issue for description diff also.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 11 Jan 2018 16:30:46 +0530] rev 3399
obslog: colorize the description diff shown in obslog -p
This patch colorizes the description diff shown in `hg obslog -p`. The labels
for the header are different from that of the patch as the main header which
says `diff -r <somehash> -r <somehash> <filename>`. Next patch will hack to add
that.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 10 Jan 2018 19:47:43 +0530] rev 3398
obslog: colorize the patch shown using `hg obslog -p`
This patch adds color support to the patch shown in obslog command.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 27 Dec 2017 04:09:50 +0530] rev 3397
topic: suggest using topic when user creates a new head on branch
This patch adds a message to use topics when user creates a new head on a
branch.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 15 Jan 2018 18:41:29 +0100] rev 3396
changelog: update changelog with some of the benefit from the new format
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 11 Jan 2018 18:36:05 +0530] rev 3395
evolve: use better words in conflict markers of `hg evolve`
Though we call merge.graft internally, we still have the functionality to pass
the words we want to show up in conflict markers. So let's use better words
here.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 11 Jan 2018 18:38:09 +0530] rev 3394
tests: add a test demonstrating we still use graft in conflict markers
This patch adds a test which shows that we still use the word graft in the
conflict markers. Next patch will start using evolve instead of graft.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 10 Jan 2018 15:59:35 +0530] rev 3393
evolve: remove the old functions for writing evolvestate
Previous patch made all the users of these functions to use the evolvestate
class and now they are not required. Let's remove them.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 10 Jan 2018 15:57:43 +0530] rev 3392
evolve: use the new evolvestate class in place of old methods
Earlier we had three methods, which used to handle all the storage around the
evolvestate but in previous patch we have introduced an evolvestate class
wrapper which can serve for all our needs. This patch replaces the existing
usage of the evolvestate with the new class introduced.
Upcoming patches will start using the class at more places.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 10 Jan 2018 14:53:01 +0530] rev 3391
evolvestate: add a class to wrap the state of `hg evolve` command
This patch adds a new file which contains a class which will act as a wrapper
for the data to be stored or used during the `hg evolve` command. This patch
just introduces the file and does not use it at the moment. The upcoming patches
will start using it.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 12 Jan 2018 19:23:29 +0530] rev 3390
evolve: start vendoring third party package cbor
This patch adds a third party package named cbor. cbor is a data serialization
format and this library provides API to convert Python Objects into cbor
formatted data. To know more about cbor, hop onto cbor.io
The files are copied from it's official bitbucket repository which is at
https://bitbucket.org/bodhisnarkva/cbor/src/113f42203c941470c98f7174065ba9b384cff727/
cbor.py can be found at
https://bitbucket.org/bodhisnarkva/cbor/src/113f42203c941470c98f7174065ba9b384cff727/py/cbor/cbor.py
# no-check-commit as we are importing a third party package
Modified test-check-flake8.t to not lint on thirdparty packages.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 09 Jan 2018 20:01:50 +0530] rev 3389
uncommit: add a new flag `--revert` to discard wdir changes after uncommit
This patch adds a new flag to `hg uncommit` using which one can discard the wdir
changes which are left after the operation. Both the changes, the ones which
were before the uncommit and the ones which were added to wdir as a result of
uncommit as cleared out.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 09 Jan 2018 15:39:47 +0530] rev 3388
evolve: use phases.new-commit config to retain phase information (issue5720)
Since the previous patches replaced the use of graftstate with evolvestate and
we don't graft anymore on evolve --continue, we have now the capability to fix
underlying bugs. This patch makes sure we use the phases.new-commit config to
make a new commit of the same phase as that of the predecessor.
Tests added in the previous patch shows the bug being fixed.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 09 Jan 2018 15:33:57 +0530] rev 3387
tests: add a test demonstarting lose of phase in `hg evolve`
This patch adds a new test file which demonstrates the lose of phase information
when hg evolve command runs into conflict. This is algo bug5720. The upcoming
patch will fix it.
A new test file is added as existing test files serve their own purpose and are
already cluttered.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 06 Jan 2018 19:07:43 +0530] rev 3386
evolve: add a utility fn to check validity of opts passed to `hg evolve`
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 06 Jan 2018 18:48:15 +0530] rev 3385
evolve: don't use graftstate for continuing `hg evolve`
Before this patch, if user runs `hg evolve`, we read the evolve state, write a
graftstate from that information and run graft command. This patch replaces that
logic with new logic which does not depends on the graft state.
The new logic is very filtered part of logic from graft command. We did not
require a lot of opts checking and filtering revs logic from the graft command
as our use case is fixed.
This is the start of series/work which will make `hg evolve` better and have
a good statefile for itself.
Pulkit Goyal <7895pulkit@gmail.com> [Tue, 09 Jan 2018 23:42:57 +0530] rev 3384
topics: add a new templatekeyword `topic`
This patch adds a new templatekeyword topic which can be used to list the topic
of the changeset when using commands which supports templating.
Boris Feld <boris.feld@octobus.net> [Wed, 10 Jan 2018 10:54:02 +0000] rev 3383
packaging: update MANIFEST.in to include new tutorial files
I forget to update the MANIFEST.in file when important the new tutorial files.
This commit fix that.
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 16 Dec 2017 23:40:42 +0100] rev 3382
test-compat: merge mercurial-4.2 into mercurial-4.1
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 16 Dec 2017 23:40:40 +0100] rev 3381
test-compat: merge mercurial-4.3 into mercurial-4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 16 Dec 2017 23:40:39 +0100] rev 3380
test-compat: merge stable into mercurial-4.3
Boris Feld <boris.feld@octobus.net> [Wed, 25 Oct 2017 11:27:04 +0200] rev 3379
test: add a test to reproduce issue 5720
Boris Feld <boris.feld@octobus.net> [Tue, 04 Jul 2017 14:55:50 +0200] rev 3378
test: add missing cycle test
Also fix precursors to break on obs markers cycles.
Boris Feld <boris.feld@octobus.net> [Mon, 08 Jan 2018 17:38:58 +0100] rev 3377
Small typos fixing in the topic tutorial
Boris Feld <boris.feld@octobus.net> [Mon, 08 Jan 2018 11:46:53 +0100] rev 3376
doc: import the training support
Import the training support which was stored in a private-repository before.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 05 Jan 2018 23:20:30 +0100] rev 3375
branching: merge with stable
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 05 Jan 2018 17:15:43 +0530] rev 3374
evolve: use new trouble names in commit messages
There is case when we add trouble to the commit message while using `hg evolve`.
This match makes sure, we use the new trouble names. The hash changed because it
depends on commit messages.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 09 Dec 2017 08:19:07 +0530] rev 3373
evolve: use compat.TROUBLES to show troubles in user interface
compat.TROUBLES is a dict which contains the trouble name for each trouble
according to the hg version user is using.
All of the replacements are related to `hg evolve` command.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 28 Dec 2017 04:09:02 +0530] rev 3372
topics: list only topic names in quiet mode
This will be helpful in bash completion.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 27 Dec 2017 23:51:18 +0530] rev 3371
topics: take logic to parse username to a separate function
In next patch we will be adding support to `hg stack` to show users, and this
logic will be required there too. So let's take it out in a separate function.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 05 Jan 2018 22:50:21 +0100] rev 3370
changelog: fix a typo in the changelog
There is probably many others but that one is fixed now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 05 Jan 2018 04:37:19 +0100] rev 3369
caches: switch to 'auto' warming by default
This options seems good let us make it the default.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 05 Jan 2018 04:26:59 +0100] rev 3368
caches: add a 'auto' option for obshashrange cache warming
This option will only warm the cache when used as a server.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 05 Jan 2018 04:26:51 +0100] rev 3367
caches: extract some config reading in 'shouldwarmcache'
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 05 Jan 2018 03:35:07 +0100] rev 3366
caches: pass the transaction to the "shouldwarncache" logic
This will allow to have smarter mode about cache warming (eg: only warm them for
server transaction.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 05 Jan 2018 22:17:27 +0100] rev 3365
caches: record 'desc' attribute on transaction
This is useful to know if a transaction if server side or not.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 05 Jan 2018 04:37:49 +0100] rev 3364
caches: protect against missing connection
If the connection cannot be established, we should not try to use it.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 27 Dec 2017 05:01:30 +0530] rev 3363
evolve: don't show working directory obsolete message if we were on it
This patch tweaks showing wc obsolete message functionality to not show the
message if the operation led us to the same changeset we were on before and it
didn't obsoleted it. This make failed updates, update on current changeset and a
pull with no change omit showing the message.
This has some cons like if you are on rev 1 which is obsolete and you do `hg up
<revset>` where revset is some revset which resolves to the rev 1, we won't show
the warning as shown earlier.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 28 Dec 2017 03:12:54 +0530] rev 3362
prev: jump to parent's successor if parent is obsolete and topic is involved
`hg stack` shows a linear chain of commits even when they are not linear chain
and some changesets are obsoleted and have successors as separate head. This is
very nice to have a post evolution view of the stack. However when `hg prev` is
run on an unstable changeset whose parent is obsolete and does not topic but
parents successor has the topic, it shows no parent on the topic.
This patch makes `hg prev` update to parent's successor and make things follow
the stack order.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 28 Dec 2017 03:08:22 +0530] rev 3361
tests: add a test showing wrong behaviour doing `hg prev` on orphan cset
If there is an unstable changeset in the topic stack, whose parent is not a
part of stack but has a successor which is part of stack, hg stack does shows
them in linear order, but `hg prev` on that orphan changset says no parent on
that topic. However it should update to the successor of the changeset.
It will be fixed in the next patch.
Boris Feld <boris.feld@octobus.net> [Fri, 05 Jan 2018 09:51:07 +0100] rev 3360
test: update output to 02fdb8c018aa
Now that we have directaccess in core, we get a new warning message when
updating to a hidden changeset. Update the tests.
CORE-TEST-OUTPUT-UPDATE: 02fdb8c018aa
Boris Feld <boris.feld@octobus.net> [Fri, 05 Jan 2018 09:23:09 +0100] rev 3359
test: update output to 9b3f95d9783d
The unstable graph nodes are now shown with the character "*", update the test
outputs.
CORE-TEST-OUTPUT-UPDATE: 9b3f95d9783d
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 06:12:02 +0100] rev 3358
stablesort: use parent filtering in a place we forgot to
Freak merge striked again.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 06:18:50 +0100] rev 3357
obshashrange: add a progressbar to upgrade
This section is the slowest, have some progress idea would be useful.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 04:29:02 +0100] rev 3356
stablerange: add an sql index on subranges id too
This should speed up query that find super ranges.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 04:14:05 +0100] rev 3355
obshashrange: less brutal reset when receiving markers on existing node
We now target the affected ranges only. The implementation is still slow but
that should be better than what we had before.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 04:39:45 +0100] rev 3354
obshashrange: update the cache updating logic
Use the more modern option when available. (Same as the other caches).
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 04:24:37 +0100] rev 3353
stablerange: cleanup the update logic
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 04:23:45 +0100] rev 3352
stablesort: cleanup the update logic
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 04:22:36 +0100] rev 3351
firstmergecache: cleanup the update logic
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 04:21:53 +0100] rev 3350
depthcache: cleanup the update logic
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 04:12:02 +0100] rev 3349
changelog: add an entry about the obshashrange changes
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 04:35:40 +0100] rev 3348
stablerange: be more cautious when deleting the sql connection
This triggered some crash in further development. This also match what is done
elsewhere with this attribute.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 03:42:54 +0100] rev 3347
stablerange: clarify sql transaction logic
This should help concurrent access.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 03:30:13 +0100] rev 3346
stablerange: use mergepoint based algorithm for the official stable range
Changing the official stable range will impact all users of the infrastructure.
We update version number of the cache file and discovery methods to clarify
this.
We do no keep compatibility with the old method over the wire. The new algorithm
is much better and keeping compat is more work than we have time for right now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 03:07:14 +0100] rev 3345
stablerange: explicitly create a stablerange entry for branchpoint method
We are about to change the default.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 18 Dec 2017 02:17:29 +0100] rev 3344
stablerange: have a mergepoint based sql backed class
Everything is so generic that getting a class is 3 line of codes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 18 Dec 2017 02:11:34 +0100] rev 3343
stablerange: introduce a sql backed version of the generic on disk cache
This is getting use close to actually using the new sorting and algorithm for
real.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 18 Dec 2017 01:11:01 +0100] rev 3342
stablerange: add a base class for on disk stored stablerange class
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 02:13:19 +0100] rev 3341
stablesort: use on disk cache for test
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 02:01:58 +0100] rev 3340
caches: factorise the cache warming check
The old conditional was duplicated and hard to read. We factorise everything
into the `utility` module.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 00:06:07 +0100] rev 3339
stablerange: use repo-carried stablesortcache
That one is common to all and disk persisted
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 21 Dec 2017 00:34:31 +0100] rev 3338
stablesort: expose the cache through the repository
Let have a unique instance, keep it warm and accessible.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 29 Nov 2017 10:38:52 -0500] rev 3337
stablesort: implement an ondisk cache
Persisting the cache on disk will be important for large repositories.