Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:40:20 +0200] rev 2419
tests: glob an absolute path
The ssh command path was in full and pointing the mercurial checkout of the last
one who touched the test.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:34:26 +0200] rev 2418
olog: document the default value
We actually display the log for '.' which is useful.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:29:28 +0200] rev 2417
readme: rearrange changelog content
blackbox is more important than the various caches changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:18:01 +0200] rev 2416
obshistory: rename the command to "olog"
The command start to look good enough to be handed out to user. We replace the
old and useless "olog" alias in favor of the new command.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 18:04:47 +0200] rev 2415
obshistory: move the command into the obshistory module
The root module is far too large already.
Boris Feld <boris.feld@octobus.net> [Thu, 18 May 2017 17:40:07 +0200] rev 2414
obshistory: add docstring to cmddebugobshistory
Add debugobshistory command documentation based on the log command
documentation.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 17:47:59 +0200] rev 2413
obshashrangecache: make sure we re-warm the cache after a reset
This will "mitigate" the effect of dropping existing entries when new markers
affect existing range.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 17:35:36 +0200] rev 2412
obshashrangecache: precisely track affected revs when adding new markers
This will be useful when we start doing finer grained invalidation (instead of
dropping all data).
Boris Feld <boris.feld@octobus.net> [Thu, 18 May 2017 14:58:22 +0200] rev 2411
debugobshistory: handle multiple cycles
We previously handled up to one cycle only. This is now fixed.
Boris Feld <boris.feld@octobus.net> [Thu, 18 May 2017 14:49:02 +0200] rev 2410
test: clean the debugobshistory cycle test
Use 'desc(...)' instead of revision numbers.
Also blank lines between commands in the same test
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 17:03:11 +0200] rev 2409
obsdiscovery: add more debug output
we add a summary debug output to help gathering data.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 16:59:25 +0200] rev 2408
discovery: log information about obshashrange
We augment the blackbox output to help with data gathering.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 11:29:27 +0200] rev 2407
obshistory: add a graph option on the debugobshistory command
Add a graph option (--graph) to the debugobshistory. The output is
like the 'hg log -G' output. The option is activated by default but
can be deactivated with '--no-graph' option.
There are various issue with the current implementation (multiple cycles
handling, N² complexity) but this can be fixed later.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 11:29:23 +0200] rev 2406
obshistory: import 'node' as 'nodemod'
This simplify the next changeset.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 11:00:06 +0200] rev 2405
label: add a label for the node in the "wc now at" message
MOAR COLOR FOR THE COLOR GOAD!
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 18 May 2017 10:56:08 +0200] rev 2404
label: rename 'evolve.short_node' to 'evolve.node'
A wider labelk will helps compatibility.
Boris Feld <boris.feld@octobus.net> [Wed, 17 May 2017 19:20:43 +0200] rev 2403
obshistory: refactor debugobshistory
Rename the function and extract the heavy work of the command
in a separate module named obshistory.py
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 18:54:48 +0200] rev 2402
test: adapt to change in cache warming in core
Core Mercurial has a more rational cache warming strategy now. 24f55686a63d
stopped warming of the cache after every changegroup application (in favor of
end of transaction warming). This reflect in the blackbox test output.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 18:38:13 +0200] rev 2401
test: adapt to change in cache warming in core
Core Mercurial has a more rational cache warming strategy now. 2b6692df1bdf
stopped warming of the cache after every commit (in favor of end of transaction
warming). This reflect in the blackbox test output.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 18:47:22 +0200] rev 2400
stablerangecache: avoid crash when 'cache/' directory is missing
If the directory is missing, we create it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 18:40:48 +0200] rev 2399
obshashrange: avoid crash when 'cache/' directory is missing
If the directory is missing, we create it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 17:16:59 +0200] rev 2398
tests: apply output changes from core fix
Mercurial core fixed a bug were the obsolete set (and all depending data) stayed
invalid after markers were merged. Fixing this bug is fixing some bad output on
the evolve side so we apply the output change.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 15:49:21 +0200] rev 2397
packaging: mention 'dev' status in the version number
Boris Feld <boris.feld@octobus.net> [Wed, 17 May 2017 09:28:10 +0200] rev 2396
color: update the shorttemplate to use colors
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 14:49:02 +0200] rev 2395
merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 14:40:18 +0200] rev 2394
obshashrange: cleanup 'valid' life cycle
- reset is only called when we detect a strip, the on disk data are invalid,
- after a reset, we should not keep using the data base connection,
- after a write, the on disk data are valid.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 12:27:13 +0200] rev 2393
obsrangecache: raise programming error when using an unwarmed cache
This will provide a better experience for developer using this the cache.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 13:27:29 +0200] rev 2392
obshashrange: stop marking on-disk data as invalid on clear
This was abusing and prevent proper use of the on disk cache.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 13:16:18 +0200] rev 2391
obshashcache: purge the meta line before writing a new one
Otherwise we get multiple lines and this gets messy.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 13:14:50 +0200] rev 2390
obshashrange: drop spurious whitespace
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 12:25:56 +0200] rev 2389
obshashcache: invalidate affected cache entries on side
Calling reset during upgrade is screwing up the cache key update.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 12:26:15 +0200] rev 2388
obshashcache: properly break out of all loops
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 12:23:10 +0200] rev 2387
dualsourcecache: simplify cachekey.clear
We do not needs the super call anymore and we can make the reset case more
explicit. So we do.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 11:58:48 +0200] rev 2386
tests: small test update
This is a bit clearer.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 11:23:33 +0200] rev 2385
dualsourcecache: fix obskey return by _checkkey
The function was returning the old key instead of the new one. This is now
fixed.
Boris Feld <boris.feld@octobus.net> [Wed, 17 May 2017 11:47:14 +0200] rev 2384
test: update test-obsolete.t to use common.sh
The definition of getid() in the test file was wrong, use the one
from common.sh instead
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:23:31 +0200] rev 2383
obshashrange: log reset from new markers
This will help tracking performance impact from current limitation.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:18:46 +0200] rev 2382
dualsourcecache: log cache reset
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 17:03:34 +0200] rev 2381
stablerange: log time spent updating the stable range
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 16:56:37 +0200] rev 2380
cache: track time spend updating various cache
This produce more useful blackbox log.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 15:20:53 +0200] rev 2379
obshashrange: adds blackbox usage in tests
This will help track the validation of the cache.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:45:08 +0200] rev 2378
obshashrange: test behavior in case of rollback
The cache should be properly invalidated.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:42:50 +0200] rev 2377
obshashrange: extend tests
We test more situations.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:18:30 +0200] rev 2376
dualsourcecache: add a cache name
This will be used to automatically log message for blackbox
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 12:17:13 +0200] rev 2375
obscache: stop definition of the empty key
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 11:41:36 +0200] rev 2374
obshashrange: keep value fetched from sql in memory
This will reduce the number of roundtrip to the data base we need.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 11:37:45 +0200] rev 2373
obshashrange: stop inheriting from 'dict'
A simple dictionary attribute seems more simpler.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 09:52:06 +0200] rev 2372
merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 00:23:19 +0200] rev 2371
obshashrange: to not overwrite the list with the set
We reusing the list variable lower in the code.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 00:22:24 +0200] rev 2370
obshashrange: properly break out of the two loops
Otherwise we would continue to iterate even after we reseted the cache.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 17 May 2017 00:21:30 +0200] rev 2369
obshashrange: fix reset conditional
If the revision is in "revs" we should not reset the cache. The old code was
wrong (Thanks goes to new tests for catching this).
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 16 May 2017 11:21:41 +0200] rev 2368
cache: ensure we warm stablerange cache before the obshashrange cache
I've been seeing traceback that seems to be happening because of issues in this
area.
Rodrigo Damazio Bovendorp <rdamazio@google.com> [Tue, 16 May 2017 23:37:10 -0700] rev 2367
evolve: fixing obscache invalidation
This was missing a call to the parent's destroyed(), such that any transaction
after stripping some nodes would result in a crash (by attempting to read nodes
which were stripped).
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 21:21:31 +0200] rev 2366
obshashrange: warm the cache at the end of each transaction
This will help having warmed cache for read only client.
The warming is still imperfect in case of markers that trigger a reset, but we
are in a better place than what we used to be.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 21:00:39 +0200] rev 2365
obshashrange: warm cache outside of loops
The performance impact will be lower
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 21:20:02 +0200] rev 2364
obshashrange: "update" the cache on each transaction close
Right now the "update" does not really file the cache, but it will detect
invalid situation and clean them.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 20:52:19 +0200] rev 2363
obshashrange: properly invalidate the cache on destroyed
Copy paste is the scurge of code source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 20:49:27 +0200] rev 2362
obshashrange: properly drop the current connection on clear
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 20:40:00 +0200] rev 2361
obshashrange: exit early if nothing to write
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 12 May 2017 20:29:54 +0200] rev 2360
obshashrange: use the dualsourcecache as a base for the cache
This will easily open the way to incrementally updated obshashrange cache.
Small update are needed to the data base schema so be bump the version
Currently the update function is not warming the cache (but details case where
it is invalidated).