tests: glob an absolute path The ssh command path was in full and pointing the mercurial checkout of the last one who touched the test.

olog: document the default value We actually display the log for '.' which is useful.

readme: rearrange changelog content blackbox is more important than the various caches changes.

obshistory: rename the command to "olog" The command start to look good enough to be handed out to user. We replace the old and useless "olog" alias in favor of the new command.

obshistory: move the command into the obshistory module The root module is far too large already.

obshistory: add docstring to cmddebugobshistory Add debugobshistory command documentation based on the log command documentation.

obshashrangecache: make sure we re-warm the cache after a reset This will "mitigate" the effect of dropping existing entries when new markers affect existing range.

obshashrangecache: precisely track affected revs when adding new markers This will be useful when we start doing finer grained invalidation (instead of dropping all data).

debugobshistory: handle multiple cycles We previously handled up to one cycle only. This is now fixed.

test: clean the debugobshistory cycle test Use 'desc(...)' instead of revision numbers. Also blank lines between commands in the same test

obsdiscovery: add more debug output we add a summary debug output to help gathering data.

discovery: log information about obshashrange We augment the blackbox output to help with data gathering.

obshistory: add a graph option on the debugobshistory command Add a graph option (--graph) to the debugobshistory. The output is like the 'hg log -G' output. The option is activated by default but can be deactivated with '--no-graph' option. There are various issue with the current implementation (multiple cycles handling, N² complexity) but this can be fixed later.

obshistory: import 'node' as 'nodemod' This simplify the next changeset.

label: add a label for the node in the "wc now at" message MOAR COLOR FOR THE COLOR GOAD!

label: rename 'evolve.short_node' to 'evolve.node' A wider labelk will helps compatibility.

obshistory: refactor debugobshistory Rename the function and extract the heavy work of the command in a separate module named obshistory.py

test: adapt to change in cache warming in core Core Mercurial has a more rational cache warming strategy now. 24f55686a63d stopped warming of the cache after every changegroup application (in favor of end of transaction warming). This reflect in the blackbox test output.

test: adapt to change in cache warming in core Core Mercurial has a more rational cache warming strategy now. 2b6692df1bdf stopped warming of the cache after every commit (in favor of end of transaction warming). This reflect in the blackbox test output.

stablerangecache: avoid crash when 'cache/' directory is missing If the directory is missing, we create it.

obshashrange: avoid crash when 'cache/' directory is missing If the directory is missing, we create it.

tests: apply output changes from core fix Mercurial core fixed a bug were the obsolete set (and all depending data) stayed invalid after markers were merged. Fixing this bug is fixing some bad output on the evolve side so we apply the output change.

packaging: mention 'dev' status in the version number

color: update the shorttemplate to use colors

merge with stable

obshashrange: cleanup 'valid' life cycle - reset is only called when we detect a strip, the on disk data are invalid, - after a reset, we should not keep using the data base connection, - after a write, the on disk data are valid.

obsrangecache: raise programming error when using an unwarmed cache This will provide a better experience for developer using this the cache.

obshashrange: stop marking on-disk data as invalid on clear This was abusing and prevent proper use of the on disk cache.

obshashcache: purge the meta line before writing a new one Otherwise we get multiple lines and this gets messy.

obshashrange: drop spurious whitespace

obshashcache: invalidate affected cache entries on side Calling reset during upgrade is screwing up the cache key update.

obshashcache: properly break out of all loops

dualsourcecache: simplify cachekey.clear We do not needs the super call anymore and we can make the reset case more explicit. So we do.

tests: small test update This is a bit clearer.

dualsourcecache: fix obskey return by _checkkey The function was returning the old key instead of the new one. This is now fixed.

test: update test-obsolete.t to use common.sh The definition of getid() in the test file was wrong, use the one from common.sh instead

obshashrange: log reset from new markers This will help tracking performance impact from current limitation.

dualsourcecache: log cache reset

stablerange: log time spent updating the stable range

cache: track time spend updating various cache This produce more useful blackbox log.

obshashrange: adds blackbox usage in tests This will help track the validation of the cache.

obshashrange: test behavior in case of rollback The cache should be properly invalidated.

obshashrange: extend tests We test more situations.

dualsourcecache: add a cache name This will be used to automatically log message for blackbox

obscache: stop definition of the empty key

obshashrange: keep value fetched from sql in memory This will reduce the number of roundtrip to the data base we need.

obshashrange: stop inheriting from 'dict' A simple dictionary attribute seems more simpler.

merge with stable

obshashrange: to not overwrite the list with the set We reusing the list variable lower in the code.

obshashrange: properly break out of the two loops Otherwise we would continue to iterate even after we reseted the cache.

obshashrange: fix reset conditional If the revision is in "revs" we should not reset the cache. The old code was wrong (Thanks goes to new tests for catching this).

cache: ensure we warm stablerange cache before the obshashrange cache I've been seeing traceback that seems to be happening because of issues in this area.

evolve: fixing obscache invalidation This was missing a call to the parent's destroyed(), such that any transaction after stripping some nodes would result in a crash (by attempting to read nodes which were stripped).

obshashrange: warm the cache at the end of each transaction This will help having warmed cache for read only client. The warming is still imperfect in case of markers that trigger a reset, but we are in a better place than what we used to be.

obshashrange: warm cache outside of loops The performance impact will be lower

obshashrange: "update" the cache on each transaction close Right now the "update" does not really file the cache, but it will detect invalid situation and clean them.

obshashrange: properly invalidate the cache on destroyed Copy paste is the scurge of code source.

obshashrange: properly drop the current connection on clear

obshashrange: exit early if nothing to write

obshashrange: use the dualsourcecache as a base for the cache This will easily open the way to incrementally updated obshashrange cache. Small update are needed to the data base schema so be bump the version Currently the update function is not warming the cache (but details case where it is invalidated).

obscache: makes dualsourcecache compatible with obshashrange cache needs The goal of the abstract method is to be reusable. So we make sure it is reusable.

readme: add a changelog entry about the more efficient obscache

obscache: extract a data agnostic class We now have an independent class that we can reuse for other purpose (eg: obshashrange cache)

obscache: extract the actual data update in a dedicated function This will help extract a data agnostic class.

obscache: move an assert to a lower level

obscache: use 'nullid' as the hash of an empty obsstore This align this result with what we use for 'emptykey'

obcache: move empty on the class We'll extract a smaller data agnostic class but we need to gather all method on it first.

obcache: move _checkkey on the class We'll extract a smaller data agnostic class but we need to gather all method on it first.

obcache: move updateneeded on the class We'll extract a smaller data agnostic class but we need to gather all method on it first.

obshistory: only display each revision once in debugobshistory When using a revision range, the same precursor could have been displayed more than once. Use a cache to display each revision only once. It's a fix until we found the nicest way to display obs history.

obshistory: display a message when one marker node has no change ctx When exchanging obs markers, there is some change contexts referencing change contexts that are not available locally. As we cannot display informations about them, instead print a message saying so.

ui: hg topic now display if current revision is in bad state (issue5533) Previously, hg topic didn't showed the state of the current revision. Now if show both informations.

obsstore: also guard agains changing object in '_checkkey' The 'upgradeneeded' function needs to be able to pass the object it fetched once.

obscache: guard from changing changelog or obsstore object We access these object once to make sure they will never change through the function (and their content will be fixed).

obscache: return the new data along-side the upgrade needs (and cache key) Having one function returning consistent data will help prevent race.

obscache: use the smaller scope function This make the function simpler and allow larger update on the 'upgradeneeded' one.

obscache: extract the cache key validation in its own function This help keep the "up to date logic" simpler and prepare a more complex version of the "upgradeneeded" logic that would return the full data needed for the upgrade.

obshistory: use formatter instead of ui.write in the debugobshistory command Replace ui.write with a formater to have template support and json output. Update tests to assert json outputs.

ui: Fix hg stack json output Previously 'hg stack -Tjson' generated invalid output like: [ { "isentry": true, "topic.stack.desc": "...", "topic.stack.index": 1, "topic.stack.state": "current", "topic.stack.state.symbol": "@" } ] , { "isentry": true, "topic.stack.desc": "...", "topic.stack.index": 1, "topic.stack.state": "current", "topic.stack.state.symbol": "@" }, { "isentry": false, "topic.stack.desc": "...", "topic.stack.state": "base", "topic.stack.state.symbol": "^" } ] I de-indented the fmt.end() to generate this output: [ { "isentry": true, "topic.stack.desc": "...", "topic.stack.index": 1, "topic.stack.state": "current", "topic.stack.state.symbol": "@" }, { "isentry": false, "topic.stack.desc": "...", "topic.stack.state": "base", "topic.stack.state.symbol": "^" } ] I've also added a test case.

topic: configure some default color for topic This makes thg usable

topic: automatically configure thg to display topic If no other config is set, we configure Tortoise-hg to display topic. This should helps usability.

readme: update readme to mention 'debugobshistory'

obshistory: add some color

obshistory: add a debugobshistory command to show obs history of a revs Add the debugobshistory command that accept a revision range and display the obsolescence containing each revision in the range. For the moment, it only displays the predecessors.

tests: add the commit style checker from Mercurial

obscache: update the cache key in place Instead of computing the key in place, we update the existing one using the data used for the incremental update of the content. This will help reaching purely incremental cache eventually. The 'getcachekey' function is dropped as it is no longer used.

obscache: distinct 'clear' and 'reset' We make a difference between basic invalidatiton (or lack of loading) and 'reset' (current cache data are invalid). We can now ensure a non-None key when we start the update. This will allow us to "update" the existing key instead of recomputing one from scratch. This is more efficient and less racy.

merge with stable

serveronly: also enable the obscache for server only setting The obscache is useful and speeds things up. So we also enable for server only setting.

obscache: document a possible way forward to skipping obsstore parsing We document a possibly viable idea for updating the cache on new revs without having to fully parse the obsstore.

obscache: update some documentation Update some data and do some proof reading.

obscache: Only access the new obsmarkers for marker update Since we know what what is the part of the file with "new" markers we can just access these. If the cache was up to date before the transaction, we'll re-parse data we just wrote. See the inline comment for details. This is good enough for now.

obscache: extract _updatemarkers code into its own function This split the update logic from the bit retrieving markers. That cannot be bad.

obscache: extract code to update from new revision Code cleanup and prepare upstreaming. The make the code more likely to work with the key validation returning an iterator of revs to update the cache with.

obscache: move assert earlier in the code If we are to crash, let us crash earlier.

merge back with stable

Added tag 6.1.0 for changeset 8510d3fd7c3b

packaging: prepare version 6.1.0

meta: update tested version to 4.1.2 We tested against the latest 4.1 too.

merge with future 6.1.0 No extra adjustment needed from hg-3.9 result

merge with future 6.1.0 No extra adjustment needed from hg-4.0 result

merge with future 6.1.0 In addition to the output reverted for 4.1, we also drop the "troubles:" entry from the standard log.

merge with future 6.1.0 test pass fine except for the removal of the extra data when accessing hidden revision. The better message are 4.2+ only.

compat: drop the context manager used to write the cache file Mercurial 3.8 does not supports context manager on atomic temporary file.

compat: make obscache code compatible with Mercurial version prior to 4.2 the phasecache.getrevset method is new in 4.2.

evolve: record testing with 4.2 4.2 is now a things and tests pass fine.

merge with default for 6.1.0

packaging first step toward 6.1.0

auto-push: move config help in the extension help That is a better spot than the extension itself.

opening mercurial 4.1 compat branch This branch will receive test update implied by the 4.2 → 4.1 changes.

obscache: skip writing to disk if the data did not changed This will avoid rewriting the cache for every single transaction.

obscache: skip writing if the cache is empty if the cache is empty, we can just skip writing to disk.

obscache: set a valid "empty" cache key if the cache is missing This avoid detecting bad cache when it just happens to be no cache.

obscache: have the obsstore fix empty file cachekey Before this change, the missing file and empty file returned different value.

obscache: log case where the cache is not up to date This will help track performance issue

obscache: still update and use the cache during transaction Other code might access the obsolete set in the middle of a transaction. It is better to use the case in that case since the update will eventually be written when the transaction is committed.

obscache: warm the cache in all cases There are case when the obsstore have been invalidated, but we still need to update the cache.

obscache: update the format to allow negative tiprev If the changelog is empty (but the obsstore is not) the 'tiprev' will be -1.

obscache: load the disk data before checking is the cache is up to date This is actually required since non-loaded cache will never be up to date...

obscache: skip the cache entirely if not up to date The current update code has some race condition windows around updating. But we also ensure the cache are up to date with every transaction. So outdated cache mean another client have been mudding the repository but things will get back in place at the next transaction. So we just skip using the cache when not up to date. This is not the best we could do. But this is good enough for now.

readme: mention that some improvement are enabled for 4.2 only

perf: use the cache to compute the obsolete set. The official "obsolete" computation is switch to using the cache. This provide noticable speed for operation that does not need to actually access the obs markers. The part relating to obsolete changeset computation disappear from the execution profile when it is used.

perf: warm the cache after all transactions This is the simplest way to ensure the data are up to date.

perf: adds a cache to know if obsmarkers might affect a revision Phase information still needs to be thrown in the mix to compute the final information, but skipping reading the obsstore for most operation is a large win. Usage of this cache arrives in the next changeset.

perf: adds cachekey utility to validate changelog+obsstore content We adds more helper about cache key to prepare the arrival of a cache that can be updated iteratively (similar to branchmap cache)

perf: adds some cache key helper on the obsstore class This will be useful to allow validating cache depending on obsstore without parsing the whole obsstore.

compat: only install the better filtered message for mercurial 4.2 and above The helper function does not exist in earlier version.

evolve: update extension help I'm pretty sure there are some missing bits, but this cannot be worse than before.

merge with stable

ui: change the hidden revision error message It now display the same details than the warning when the working directory parent become obsolete like: $ hg update 0 abort: hidden revision '0' (successor: f301a99bd857)! $ hg up 1 abort: hidden revision '1' (pruned)! $ hg update 0 abort: hidden revision '0' (successors: 91311af6da10, 70653776ec4c)!

ui: add better messages when the working copy become obsolete.

topic: directly use "super" call That is how one is supposed to do it.

repo: properly progate "destroyed" call to super class The propagation of the 'destroyed' call was dropped. I'm not certain of the consequences of having a partially broken "destroyed" call, but this can't be good.

safeguard: add an option to disable automatic publishing Pushing to publishing server by mistake is a bit too common in the current state of evolve. Especially when the lack of good feature branch story make the use of -f a bit too common. So we add a very simple experimental option to allow warning (or abort) when changeset are pushed to a publishing server. This is unlikely to survive as is, but this is useful now.

merge back with stable

Added tag 6.0.1 for changeset 5ef112a6eb87

pkg: prepare release 6.0.1

debian: finalize 6.0.0 entry

readme: fix 6.0.0 release date It was March, not February.

merge with future 6.0.1 Nothing special to report

merge with future 6.0.1 Nothing special to report

merge with future 6.0.1 Nothing special to report

checkheads: update tests to match the one in core These test now exists in core, so we update the evolve version.

serveronly: fix reposetup The local 'reposetup' function was shadowing the extension helper one. We add a test for obshashrange using 'serveronly' since this is the item that made use discover the issue.

extension: simplify the extensions helper hierarchy If one mode depends on the other, its extensions helper is merged.

checkheads: do not overwrite code for Mercurial 4.2 and above The fix has been ported to Mercurial core as c6cb21ddf74a.

legacy: fix debugrecordpruneparents to call obsstore.create() with keywords It appears the API was changed twice in Mercurial at - 570f87422f54 "obsstore: add an explicit `date` argument to obsstore.create" - adb3798dce49 "obsstore: add a `parents` argument to obsstore.create" and metadata would be changed to a list of (key, value) pairs. Convert it back to a dict as expected by create().

template: adapt to new showlist() API introduced by hg e5eab0fe69ee

template: pass all mapping data to showlist() Otherwise a keyword depending on repo or ctx couldn't be rendered.

make: merge recipes for help

make: fix indent of ifeq-endif ifeq() can't be a recipe.

tests: update test to match upstreamable version Name have been clarified, documentation has been updated and some test-case have been updated to match the intended test.

tests: fix directory names in exchange-D4 test The test is based on another one and the directory name had not been updated.

tests: fix directory names in exchange-D3 test The test is based on another one and the directory name had not been updated.

merge back with default

Added tag 6.0.0 for changeset 165ad227993d

packaging: prepare version 6.0.0

merged with future 6.0 No output changed.

test-compat-hg-3.9: merge with future 6.0

merge with future 6.0.0

merge with default We are getting close to cutting a 6.0.0

readme: mention the fix for issue4354

checkheads: add a small debug message in case were we give up fast When node is unknown we assume it will stay. Yet, we might have markers to it that are going to be pushed. However, we do not have branch (ancestors) information unless we are very lucky an all of them are pruned. So for now we do not do anything assuming this will be rare. We still add a small debug message to help detecting such situation in the future.

checkheahds: switch algorithm to use pushed markers instead We now checks if markers involved in the push are relevant to nodes in the branch we try to replace. The approach is simpler and more robust. A test showing the limitation of the previous approach is added.

checkheads: add test where the rewrite of the other branch is not direct This will help testing that our logic is properly transitive.

check-heads: add tests about old heads indirectly pruned

checkheads: add more complexe case where a branch is split on multiple ones We extend case A-6 and A-7 with partial counterpart. These case are interesting because some of the partial pushing will (rightfully) works and some other won't.

checkheads: add a test of partially pushing a branch spread on multiple other If a branch is fully obsolete but is result are spread on multiple branch, pushing only one of them should detect we create new branches.

checkheads-tests: add missing parents recording for prune markers It is a bit too easy to forget about theses :/ If they are missing, the markers are not going to be exchanged on push.

checkheads: add some extra tests about "partial push" This adds a couple of test that checks that the head replacement code is properly ignored replacement not relevant to the push.

checkheads: handle partial obsolescence We now properly detects situations were only parts of the remote branch is obsoleted. To do so, we process children in the branch recursively to see if they will be obsolete. The current code has some trouble when the remote branch in unknown locally, or when the prune happened on a successors that is not relevant to the push. These case will be handled later. The processing code is becoming more and more complex, a lighter approach would be to check for the obsolescence markers that are relevant to the pushed set, but I prefer to stick with the current approach until more test cases are written.

test: force a push in inhibit's test Our checkheads detection code is becoming better and will prevent that push. As we do not care about this for inhibit, we simply force the push.

checkheads: basic handling of pruned heads (and associated tests) We now detect that heads was pruned and stop warning about it. Note that this has the same shortcoming as the existing code and only looks at the heads.

checkheads: give up on processing locally unknown changeset There are too many issue with locally unknown changesets, we ignore them for now while we get the core feature of the detection working.

checkheads: import our own copy of the checkheads code I expect enough change and experimental will be made that is it worthwhile having them done in evolution close to the rest of the exchange tests make sense.

compat: work around some filecache bug in 3.8 We are still compatible with this version.

obshashrange: have an half descent wireprotocol command The previous implementation was extremely hacky. The new version is based on the other discovery function and work!

obshashrange: improve message issued during discovery This is a minor new message that help to understand what is going on.

obshashrange: introduce basic sqlite caching Same as for stablerange, this is far from perfect but already a win. The cache is currently extremely volatile, but that will still be a win when doing multiple consecutive request during discovery. Better cache invalidation will happens "in the future".

stablerange: warm cache before using it server side We make sure the cache is fully up to date before starting to use it. Updating all value is more efficient and this give us a single point where we update and write on disk. Hopefully the cache have been kept up to date as we go anyway.

stablerange: warm cache before using it in findrangemissing We make sure the cache is fully up to date before starting to use it. Updating all value is more efficient and this give us a single point where we update and write on disk. Hopefully the cache have been kept up to date as we go anyway.

stablerange: warm cache on transaction (if obshashrange is enabled) If we plan to use it (obshashrange is enabled) we better keep it up to date. If a transaction adds node, we update the cache (this should also update the on disk version).

stablerange: introduce ondisk caching through sqlite There is many short cut and limitation with this first version of a cache but this allow use to envision some actual usage of the stablerange thingy so let us got for it.

stablerange: drop the cache on 'destroyed' if the repository have been strip, the cache is not usable as is. We could be smarter in the invalidation but that is a prototype anyway. G: changed hgext3rd/evolve/stablerange.py

stablerange: support loading the cache iteratively We record how far we loaded so that we can resume from this point.

stablerange: add some basic documentation about the cache

stablerange: warmup all upto a revision Let us start doing more systemic warming of the cache before we start writing things out. This prepare on disk caching.

debugstablerange: add a --verify flag to the command This should help us finding bugs.

stablerange: add a proper debugstablerange commands This commands allows to inspect the standard stable range of a range. That should come handy.

debugobshashrange: add a --subranges option We stop displaying -everything- by default, since is is usually very large. This will help getting better timing when measuring cache effect too, since we won't need to dig out deep cache value that real life usage would not touch.

debug: rename 'debugstablerange' to 'debugobshashrange' The command is more about the 'obshashrange' computation.

debugstablerange: improve output spacing On repo with a descent amount of changeset the number where overflowing in all directions. We give use more room now.

subranges: add a utility function to set the cache This is preparing on disk persistence for the value in this cache.

subranges: add a utility function to access the cache This is preparing on disk persistence for the value in this cache.

depth: add a utility function to set the cache This is preparing on disk persistence for the value in this cache.

depth: add a utility function to access the cache This is preparing on disk persistence for the value in this cache.

stablerange: add warming of the subrange Note that this means we build standard stable subrange for all changesets in the repository this is significantly more than what we were computing before and result is significantly more ranges being computed.

stablerange: fix merge slicing when range has multiple roots The first element in the bottom set is not necessarly the one with the lowest revision. We now properly compute and use the minimum value.

stablerange: small style fix

merge-slicing: introduce and use "inheritance point" for merge The first part of the stable sorted list of revision of a merge will shared with the one of others. This means we can reuse subranges computed from that point to compute some of the subranges from the merge. That point is latest point in the stable sorted list where the depth of the revisions match its index (that means all revision earlier in the stable sorted list are its ancestors, no dangling unrelated branches exists). This is a bit expensive to find since we have to walk all the revision, but being able to reuse subranges in all case (not just regular changesets) provide a massive speedup so the cost is worth it.

stablerange: rearrange the code picking subrange to warm Same logic, as the previous changesets, we prepare the code before adding merge support.

stablerange: rearrange the reusing logic to prepare to merge We'll soon be able to reuse some lower range when dealing with merge too. So we prepare the code for this in advance for clarity.

merge-slicing: explain an alternative implementation in a comments It has a better time complexity so a C implementation would likely out perform the current implementation

merge-slicing: use reachable roots to filter the various branches Reachable roots does what we want and have a quite fast C implementation.

merge-slicing: simplify various aspect of the code Especially the case were the bottom have single heads is not more efficiently handled.

stablerange: soon it will not provide any benefit and it gets in the way This was a bit strange and memory consuming anyway.

revsfromrange: reuse information from the stablesort We collaborate with the stablesort to store the order that led to a merge. That way, when we needs to retrieve revision from that merge we can reuse that order. We might need to filter to only retains ancestors of the merge we care about but skipping the stablesort safe a large amount of time.

stablesort: allow a callback to be triggered on merge Storing some information as we sort is going to be useful to avoid performing multiple sort while computing the stablerange.

minor simplification around rangelength

more explicite name in revsfromrange

stablerange: cache parents We happens to be doing and awful amount of parent call. We cache them locally for efficiency.

merge-slicing: avoid doing the same work twice We have already computed the list of revision in that bottom slice as 'hrevs' so we do not need to compute it a second time.

stablerange: fix a bug when a top slice ended on a merge Our "smart" detection of merge was buggy if the top slice ended on a merge. This is not fixed and tested.

slicesrangeat: stop double setting the revsinranges cache The cache should have already been filled by the logic warming the cache for the parent.

subranges: remove the recursivity of the call to isubranges(parentrange) We add some logic to ensure we'll have hot cache for the parent ranges when that matters, the cache is filled from ancestors to descendant to ensure this. The range are still 'created from descendant to ancestors to fill the revsfromrange cache since it important.

subranges: detach cache logic from computation logic Having both the logic around cache checking and setting makes is a bit harder to follow. In addition, this allow to gather the computation logic next to the other related function.

findmissingrange: properly queue new subrange for slicing The previous code was buggy and used the wrong variable leading to no extra slicing being performed to file the sample at the requested size.

findmissingrange: fix reversed value in debug output "oops"

stablecache: warmup on unfiltered repository We only looks at ancestors revision so filtering will not have any effect. This reduce overhead from the filtering.

stablerange: rename the class This is much more than just a cache now.

stablerange: do not inherit from dict This seems like and old cargo cult that when unnoticed.

stablerange: move a utility function around It make more sense to have this small function earlier in the series

stablerange: remove the now unused individual range class That class is now longer necessary, we dropped its usage for performance reason.

stablerange: directly use tuple to refer to a stable range Now that all advance logic lives in the unified class we no longer needs the individual class. Creating and operating on this cache introduce a significant overhead that we can not stop having. From now on, a range a is pair tuple '(headrev, index)'. Long live the tuple.

obshash: properly cache obshash value The code was buggy and only cached non-nullid/non-inherited value. This was previous hidden because we were using a 'propertycache' to cache the value on the range object. This fixes it and restore a lot of performance.

stablerange: directly use 'self' when possible Code movement introduced multiple silly case were we where accessing 'self' though 'repo.stablerange' for no good reasons.

revsfromrange: set the cache for the multiple bottom ranges in merge slicing We no longer rely on the object magic here.

revsfromrange: set the cache for the single bottom range in merge slicing We no longer rely on the object magic here.

revsfromrange: set the cache for the top range in merge slicing We no longer rely on the object magic here.

revsfromrange: remove reference to '_revs' in merge slicing Given '_revs' is a property from the cache, we use the official method of the object we are on instead. That method should be using the same cache than the property if available.

revsfromcache: update cache for the top slice if possible Same logic, we update the cache if have the data.

revsfromrange: skip setting the cache for length-1 top entry The content of the range is trivial to compute.

revsfromrange: update cache for parentrange directly in the code We update it where it matters if we detect that we have the data.

revsfromramge: hard code the single changeset range case That case is trivial and triggering and full stable sort for it seems a bit silly.

stablerange: introduce caching for the full revision in a set Such cache proved handy in the "per-range" class so we carry it along to the unified class. cf documentation for details.

stablerange: add a cache for stablesort ordering This will be very handy for merge, cf inline documentation for details.

stablerange: move revs computation within the main class We still need to compute the revision withing a range when we slice a merge. This is the last large logic that remains in the individual class and we migrate is on the main class.

stablerange: minor method reorders on the main class We put the public method first for clarify.

stablerange: drop "key" and "id" logic form the class We can restrict to the bare minimun for equality and hashing now.

stablerange: drop length from the class There is not remaining user.

stablerange: drop _depth Nothing uses it anymore.

stablerange: drop __repr__ IT was used for debug and the class is on it way out.

stablerange: drop the subranges method on the small class Nobody use it anymore.

stablerange: use subranges from the main class in subrangesclosure This is the last method used on the class.

stablerange: use subranges from the main class in _obshashrange This is the last method used on the class.

stablerange: use subranges from the main class in findrangemissing This is the last method used on the class.

stablerange: make sure nobody use '.depth' anymore

stablerange: use depthrevs in range slicing We stop using the property from the class to get us closer to tuple.

stablerange: use depthrevs in debugstablerange We stop using the property from the class to get us closer to tuple.

stablerange: use rangelength inside the class itself We stop using the building '__len__' this get use closer to be able to use a tuple.

stablerange: use rangelength in '_slicesatrange' We stop using the building '__len__' this get use closer to be able to use a tuple.

stablerange: use rangelength in '_slicepoint' We stop using the building '__len__' this get use closer to be able to use a tuple.

stablerange: use rangelength in subrangesclosure We stop using the building '__len__' this get use closer to be able to use a tuple.

stablerange: use rangelength in _obshashrange We stop using the building '__len__' this get use closer to be able to use a tuple.

stablerange: use rangelength in debugstablerange We stop using the building '__len__' this get use closer to be able to use a tuple.

stablerange: use rangelength in findmissingrange We stop using the building '__len__' this get use closer to be able to use a tuple.

stablerange: make sure nobody use '.index' anymore We rename the attribute for good measure.

stablerange: stop using '.index' inside the class itself We now access '[1]' as we'll do with the future tuple.

stablerange: stop using '.index' in '_slicesrangeat' We now access '[1]' as we'll do with the future tuple.

stablerange: stop using '.index' in '_slicepoint' We now access '[1]' as we'll do with the future tuple.

stablerange: stop using '.index' in 'rangelength' We now access '[1]' as we'll do with the future tuple.

stablerange: stop using '.index' in '_queryrange' We now access '[1]' as we'll do with the future tuple.

stablerange: stop using '.index' in debugstablerange We now access '[1]' as we'll do with the future tuple.

stablerange: make sure nobody use the 'stablekey' property outside the class

stablerange: make sure nobody use '.head' anymore We rename the attribute for good measure.

stablerange: stop using '.head' inside the class We now access '[0]' as we'll do with the future tuple.

stablerange: stop using '.head' in '_slicesrangeat' We now access '[0]' as we'll do with the future tuple.

stablerange: stop using '.head' in '_slicepoint' We now access '[0]' as we'll do with the future tuple.

stablerange: stop using '.head' in rangelength We now access '[0]' as we'll do with the future tuple.

stablerange: stop using '.head' in debugstablerange We now access '[0]' as we'll do with the future tuple.

stablerange: remove node unused 'node' property Close to killing that object.

stablerange: stop using '.node' in __repr__ This remove the last user to this method.

stablerange: change the key to use the revision number Using node is more stable but for now do not have on disk caching and revision number should be find in memory. This makes the data used for the file cache closer to what it will be when we use tuple. We might reintroduce node in the future but let us keep it simple for now.

stablerange: stop using '.node' in _queryrange We access the range-head revision number by index and convert it on site.

stablerange: stop using '.node' in debugstablerange We access the range-head revision number by index and convert it on site.

stablerange: stop using '.node' in findmissingrange We access the range-head revision number by index and convert it on site.

stablerange: stop using '.node' in obshashrange We access the range-head revision number by index and convert it on site.

stablerange: stop using '.node' in subrangesclosure We access the range-head revision number by index and convert it on site.

stablerange: have the class behave as a tuple If we want people to use a tuple, we should offer them a tuple. This should help update most of the code iteratively.

obshashrange: extract computation back into the discovery module This obshash is related to discovery and it seems more appropriate to have to live there. This remove the last large piece of logic from the class. We'll now be able to slowly turn it into a tuple.

obshashrange: use a small utility function to access the obshash If we want the object to disappear we needs the top level code to stop accessing its attribute.

debugstablerange: minor code reformat The content of that list will become more complex as we drop the object so we make sure to have one value per line for clarity.

stablerange: move the subrangesclosure inside the module This seems more suitable and open the way to simple update of how we build things without too much impact outside the module. The debug command is still in the 'obsdiscovery' module because it also deal to obshash and I'm not sure of were this should live yet.

stablerange: compute subranges from parent when possible Unless we are a merge, we can infer the standard subranges of a range by reusing the subranger of its parent. We update the implementation to do so. We still needs the "old way" for merge. We move that code in a dedicated function for the sake of simplicity.

stablerange: add an official warmup function The function is responsible for making sure we have the necessary data for a sets of heads. For now this only warm the depth cache. More will follow soon. Such explicite warmup will be usefull for on disck caching as an early point of writing will be easier.

stablerange: remove now unnecessary setter The class is handling all computations and cache access by itself now. So we can drop this method.

stablerange: directly perform slicing in the getting method Now that all necessary functions are available, we simply apply the standard slicing on cache miss and proceed.

stablerange: move standard slice point definition in main class More migration of code away from the doomed individual class.

stablerange: move the slicing method on the central class We migrate code away for the individual range class.

stablerange: move the range class in the new module Our ultimate goal is to remove this class for performance reason. however for now, it contains most of the code we care about so we migrate it as a block first.

stablesort: move into the stablerange module The stable range rely on the stable sort so it make senses to move it there. Will need direct access to it in the future.

subranges: migrate handling of single element range This is the simplest case by far, so we start with that one. We still use the rich object as an argument, but we'll do our best to not relying on that. This is important for performance reason.

stablerange: move the subrange cache into our new class This is the first step toward having more logic in that class

depth: extract code dedicated to depth of a merge in its own function The merge case is more complicated than the regular one, we extract is for the sake of clarity.

stablerange: move 'depth' inside a new 'stablerange' module The stablerange used for discovery requires significant amount of code. There is algorithme, cache, cache persistence, etc. So we create a dedicated module for it. The function is directly moved into a rich class handling cache (for now in memory) because we know we will need it.

obsdiscovery: document the status of the module I figured i would be useful to document what we expect from the code in each module.

split: move the debugcommand into a dedicated module The code related to debugobsstorestat is fairly independant, we move it into its own module.

legacy: move 'debugrecordpruneparents' in the extensions The transition is a couple of year old now, repository with the old format must be quite hard to find by now.

checks: correct the shebang line filtering for python files As it is, the only related file is docs/test2rst.py, which was covered by **.py. Not sure if it matters, but most patterns in core tests are for "#!.*?python". (Though there are a couple "#!.*python" tests.)

tests: add glob for Windows

tests: adds simple test case for heads checking This is the start of some systemic testing of the head superceeding detection mechanism.

tests: move exchange utility in testlib We have a testlib directory now lets use it.

exchange: fix some wrong reference to serveronly The function have all moved into 'obsexchange' now, so we do not need (and actually cannot) seek them in 'evolve.serveronly'.

checks: add a test that check MANIFEST.in content This make sure we keep the things updated.

README: add a link to mercurial devel This will help people to find the mailing list details.

README: tries to improve the title about server only This seems a bit better.

README: remove mention of make Using pip in all cases seems a better direction.

version: mark the current source as development version for 6.0.0 This is useful to distinguish the development version from the latest tagged version. In this particular case, this will allow us to publish a pre-version on pypi.

mercurial-3.8: merge with future evolve-6.0.0 We introduces the new code on the compat branch to check the tests.

mercurial-3.9: merge with hg-4.0 branch We merge with the code for the future evolve 6.0.0 code to check for compatibility. Only minor test output change (" -> ') have been noted.

mercurial-4.0: merge with future 6.0.0 A new version will be released soon, we start handling mismatch in test output to make the actual release time smoother.

checks: update pyflakes matching too We make sure to not select removed files.

checks: do not run pyflake on removed file The fileset matches removed files. This confuses pyflakes for good reasons.

compat: closing mercurial-3.7 compatibility branch The "evolve-6.0.0" release drop compatibility with Mercurial 3.7. No new commit are expected on this branch.

compat: closing mercurial-3.6 compatibility branch The "evolve-6.0.0" release drop compatibility with Mercurial 3.6. No new commit are expected on this branch.

compat: closing mercurial-3.4 compatibility branch The "evolve-6.0.0" release drop compatibility with Mercurial 3.4. No new commit are expected on this branch.

compat: closing mercurial-3.5 compatibility branch The "evolve-6.0.0" release drop compatibility with mercurial 3.5. No new commit are expected on this branch.

README: timeless typo fixes This applies some feedback timeless provided me from IRC.

cleanup: drop an empty section header

compat: drop some <hg-3.4 compatibility code The `hg commit` commands has a -i flag for ages now.

README: more update to prepare for pypi upload * mention the evolve.serveronly extension, * remove help related to topic into a different README file.

evolve: update the capabilities and commands name for obshashrange We makes is clear that these version are useful for earlier testing but they are not ready for any kind of real usage yet.

README: more change to have a pretty rendering on pypi We moves section around and fixes some markup.

MANIFEST.in: fix various mismatch check-manifest is no longer complaining

README: rework install instruction For both evolve and topic. The topic introduction is updated too.

README: rework the intro Less scary wording (similar to the wiki changes) and point to the user mailing list.

rangeobshash: minor cleanup of the obshash code We achieved minor speedup by delaying the hashing until we know it is needed.

stablerange: remove call to 'repo.revs' It turned out that the percentage of time spend parsing the revset string was two digits, so we compute de heads inline.

stablerange: reuse node calculation as much as possible We have a property cache with that value, so we just reuse it.

stablerange: adds some caching of the subranges The goal of subranges is to be as reusable as possible, so we cache the subrange relationship to take advantage of this.

stablerange: operate on an unfiltered repository We only do operation on ancestors so using unfiltered is fine.

depth: use lower lever function to compute missing The time spend parsing the revset is noticeable.

depth: update depth to code to reuse ancestors depth Computing the depth of all N revs is no longer 'O(N**2)'

obsdiscovery: extract a smarted depth in utility The function is reusing previous depth for ancestors unless this is a merge.

obsdiscovery: simply some of the missing computation

discovery: implement some range based discovery This use the previously implemented methods to implement some discovery and fetch method using ranges. There is currently major performance issue and some aspect of the protocol will changes.

discovery: introduce a official 'obshash associated to a range The hash in a combination of the hash a its subrange. If the range is a leaf, we have the obsmarker relevant to the node in that leaf range.

discovery: introduce "stable slicing" methods We introduce new code that leverage the stable sorting to slices a graph in a way "stable" accross repository. This should allow us to use theses slices for obsolescence markers discovery.

discovery: adds a function doing revnum independant sorting The function is doing a topological sort without depending on revision number. This make the sort independent of the repository and suitable for discovery.

hgignore: also ignore the 'dist' directory This is generated by the 'sdist' command

obsexchange: drop unused module shame shame shame

MANIFEST.in: also includes topic That was also overlooked when we added topic.

MANIFEST.in: fix to include all evolve submodule This was overlooked before.

obsdiscovery: organize the code by category A private function get promoted to public since another module uses it.

evolution: drop the old __temporary__.advertiseobsolete option Mercurial code supports such feature directly though its 'experimental.evolution' config option. So we drop the old code and config.

README: mention the 'serveronly' extensions It is now properly installed with the package.

server only: test a more standard method of disabling exchange We have an "official" config option from core so lets just use it.

debian: don't delete evolve and topic extensions The debian packaging rules deletes all __init__.py to avoid conflicting with the __init__.py that declares the namespace package. Now that the evolve and topic extensions also live in __init__.py files, we clearly don't want to delete all __init__.py files anymore; only the hgext3rd/__init__.py should be deleted.

serveronly: replace exc.message with str(exc) BaseException.message is deprecated in Python 2.6, so use str() instead.

cleanup: stop using 'repo.join' methods These repository method might get deprecated soon. In addition, accessing the vfs-s is not that hard.

setup: add author_email The 'sdist' command complains about it otherwise.

readme: make it valid rst That will eventually please pypi

setup.py: remove unused and harmful code importing mercurial This was failing on some build system we have. The import seemed to succeed, but then mercurial.__all__ would fail. I don't know why, but since it's unused anyway, let's just drop it.

docs: update references to installation path

test: rename serveronly tests to reflect the new extension name

evolve: stop running 'serveronly' setup Since there is no common logic remaining the smaller extension we can stop running its setup in the main extensions

discovery: directly merge the 'obsdiscovery' exthelper in top level extensions There is no reason to proxy it through the 'obsexchange' submodule.

compat: drop advertising of unsupported experimental bundle2 part The support for this part was dropped long ago in 74bc8a0c2c02. But we forgot to remove it from the 'simple4server' extension.

exchange: dispatch all code in 'serveronly' to the appropriate submodule All code related to exchange is now in either 'evolve.obsexchange' or 'evolve.obsdiscovery', and the 'serveronly' extension is using their 'exthelper' to set itself up. As a side effect, the 'serveronly' extensions now enable better exchange when pushing from that server too.

capabilities: properly sort capabilities after updating them Capabilities are usually sorted. This is especially useful to avoid silly error in test.

pull: also issue warning for old mercurial version

exchange: split between modern and legacy code We make it clearer what code is old crust and what code is the cutting edge part.

push: add extra warning about pushing to old server Pushing using old method is slow and racy. We adds warning to point this to the user. We also add inline comment to clarify the function purpose.

push: exit obsexchange early if disabled We were exiting the function later, in particular -after- issuing a message about exchanging obsmarkers.

compat: drop special code handling change in push/pull op API All version of Mercurial we support have the same API.

discovery: split discovery related code in 'obsdiscovery' More code splitting for more clarity.

exchange: rename the module Let's add a 'obs' prefix to make the module role clearer.

setup.py: include all evolve submodule We are splitting more and more code into submodule, we make sure their are properly installed. As a side effect the 'legacy' module is now installed, that is not too important. The 'evolve.hack' package is still non installed by default, as intended.

evolve: switch away from deprecated repo.opener

serveronly: use the same extensions metadata than evolve This will avoid them to drift out of sync with evolve.

evolve: move extension metadata in their own module This will allow the server only extension to reuse them. As a side effect we can now simplify the config parsing in setup.py

evolve: specify the 'minimalhgversion' 3.7 added a new nice and shinny variable to help user know when they use the wrong version of Mercurial with an extension. We now use it.

serveronly: give the sub extension a way to access to the 'evolve' module We keep it as clean as possible but if the extension is specified with a direct path, we have to be a bit hacky. Being able to access the whole evolve extension from the 'serveronly' extension will lift multiple constraints on how we organise the code and will allow for cleaner and clearer code. We extract a minor function into a 'utility' module to have something to depends on.

test: update test to check for various way to import the serveronly things We add a "setup script" that update the PYTHONPATH to allow direct import of the extension code. Then we tests that all way to import the extensions works.

tests: move "test setup" script into a 'testlib' directory This will avoid cluttering the tests directory.

exchange: move code related to exchange into a 'evolve.exchange' submodule The evolve extension is HUGE, we split exchange code appart before doing more work on it.

exthelper: move command declaration into the exthelper This is necessary to allow sub module to declare commands too.

exthelper: add a 'merge' method This will help us spread more code in different sub module.

exthelper: extract into its own submodule That code is fairly independant, we extract it into its own extensions to clarify the code

makefile: add an 'install-home' target It is similar to the Mercurial one.

makefile: only check for HGROOT when running tests Otherwise we breaks other target that do not needs HGROOT.

tests: split pyflake and flake8 tests This allow more parallelism and better skip message

flake8: run on all python file We can now run it on all file in the repository to catch potential regression.

flake8: fix error in 'setup.py' Some strange indentation in there.

flake8: fix error in 'test2rst.py' There is variosu dead code in there :-/ but we just fix flake8 complains for now.

flake8: remove "error" in documentation configuration The "error" are debatable but cheap to fix.

flake8: enable on evolve too Now that all error are fixed we can run it on all file to prevent regression.

flake8: update the code sources to fixes a horde of pyflake warnings There is many of them, they all fixed.

flake8: register 'xrange' as a builtins For some reason, flake8 thinks is is undefined.

flake8: ignore an addition rules related to import Our initialization code is too complex to make flake8 happy

flake8: document all the exception we added

README: mention the addition of the topic extensions That is probably worth noting.

tests: run pyflake on all python files We have fixed the handfull of error pyflakes found on evolve so we can setup the test to prevent regression. Next stop flake8.

serveronly: fix undefined variable This is a legit bug caught by pyflake

legacy: properly test for mercurial version in the legacy extensions Otherwise 'demandimport' would delay the raising of ImportError.

evolve: prevent global variable shadowing Small and harmless pyflake complains.

evolve: drop some unused variables More pyflakes catches.

evolve: drop some unused import topic came with pyflake checking, let us make use of it.

README: fix evolve installation path We forgot to do so when we moved things to hgext3rd.

topic: merge the topic extension in the evolve repository There is a lot of synergy between the two concepts. Topic is expected to be able to smooth multiple of evolution sharp edge. Having them both in the same repository will make this collaboration easier.

test: adapt to new core output Troubles are now displayed by log so we have to update the test.

test: adapt to change in mercurial output Nothing major here.

compat: handle difference of signature for update destination hooks The 'check' argument have been dropped in 11c253997b0e. So we make it optional for compatibility.

setup.py: also install 'hgext3rd/__init__.py' This file is needed for the namespace package to work. (And also for the package to work on its own at all).

tutorial: add a very basic pointer in the readme Ideally we should at least build the html from the rst.

tutorial: add a second part about having multiple topic

tutorial: add a first version of the tutorial with the basics This is probably not wonderful but at least we have a base.

doc: add more details about the head checking Once again, probably not great, but better than nothing.

documentation: some basic update of the documentation So far the documentation was pretty scarce and a lot of important information was missing. The new content is probably not great but it is an improvement.

flake8: ignore N801 N801 is "class names should use CapWords convention" The message comes from a pep8 plugin "pep8-naming" which cares about naming conventions. If the plugin is installed, it is automatically used by pep8 and flake8.

flake8: don't ignore E713 now that it's fixed E713 is "test for membership should be ‘not in’"

flake8: fix E713 style

flake8: fix E301 style

flake8: fix E111 style OFF BY ONE ERRORS ARE THE WORST

flake8: fix E222 style

flake8: fix E127 style

flake8: fix W391 style

tests: add flake8 check This test will hopefully help prevent style errors. To be determined: which errors / warnings to ignore?

flake8: add file for rules to ignore This will help prevent users that have an editor with flake8 capabilities from fixing linter errors for rules that are not wanted by the project. Initially, this ignore list includes everything in the project that violates pep8. I'll try to ween this list down to something a little more manageable.

init: guard _namemap with repo.topics (issue5351) This prevents reading extra data on all repo commits when there is no topic for a given name. _namemap is called a lot, and it is often called for commit shas -- which should pretty much never be names of topics...

init: cache repo.topics

stack: add warning about multiple heads This seems a good spot to nudge people toward reducing there head count.

stack: add some behind information This is the next useful thing after branch

stack: add some basic branch information In the same spirit as knowing the topic you are on, having some branch data seem useful (yet, this smell a bit like summary)

stack: add some header with the topic name This is the first step of a move to add more data about a stack in the command output.

test: add testing of stack output in 'stack-data' test. We are going to display common information, so we reuse test case.

test: rename 'list' test to 'stack-data' We are about to add stack data information to 'hg stack'. As we'll re-use the test data creating the 'test-topic-list.t' we need to rename it first to embrace its new semantic.

stack: also dim bases Now that they may have index it seems better to have a stronger marking for bases.

stack: reusing the index number in base when applicable This clarify the branching when it is easy to track back the branching point. This does not takes the evolution graph into account yet.

stack: extra argument validation logic outside of showstack It seems sensible keep the 'showstack' function purely about actually displaying and existing stack.

summary: properly label the topic name in summary This should be labelled 'topic.active' so that color can pick it up properly.

topic: list the branches this topic belong to when verbose Using the verbose listing a bit more, this seems to be useful information.

topic: properly justify the verbose data when listing topic We align all data to the widest topic.

ngtip: rely on topicmap for 'ngtip' ngtip is an old function that predates the introduction of a more proper topic aware 'topicmap'. We replace the old code with a call to the new one. This change set function return type and have minor effect in a couple of place.

topic: list the number of 'behind' changeset when --verbose is used Displaying more information in the topic list is useful, we continue with the number of 'behind' changesets. This 'behind' count the number of new changesets on the default rebase destination. This will highlight topics that need rebasing.

destination: honor the sourceset argument of _destmerge Mercurial gained a "sourceset" argument to compute the merge destination of any changeset (the one in the 'sourceset'). This now works for the version in topic too. The support is quite basic (because we pick only one changeset from the sourceset) but that's a start.

destmerge: improve topic head computation and handling This rework get use two benefits: - heads are now computed on a "stabilized" state, - heads above the 'source' are now properly cleaned up,

evolve: extract the code copied from evolve in a submodule This will allow us to use that code in other module.

destmerge: honor the 'onheadcheck' argument This argument was introduced in Mercurial some time ago but the topic extension was never updated to take it in account. This is now fixed.

destination: use the correct abort class for error These errors have been in Mercurial long enough. Having them will make the coming changesets simpler.

topic: list the number of head when --verbose is used Displaying more information in the topic list is useful, we continue with the number of heads on the topics, this will help highlight the problem to users. We only display head if there is more than one.

topic: list the number of troubled changesets when --verbose is used Displaying more information in the topic list is useful, we continue with the number of troubled changesets. This will help people to spot topics that needs evolution, for example after a pull.

topic: list the number of changesets when --verbose is used Displaying more information in the topic list is useful, we start with the most obvious: number of non-obsolete changeset in the topic.

topic: add color for the active topic We reuse the same color that the one used for the active bookmark.

topic: add formatter support Using formatter to output the list of topic will add support for color and richer templater. We add some test for output control. We introduce a dedicated test to help with coming more complexe output.

topic: extract the code listing all topics The code will become more complexe with formatter support and additional data in the verbose output. We extract the code in its own function first.

stack: introduce and explicite command to display the stack If is worth testing having the feature lives outside 'hg topic --list'. The 'stack' name is sub optimal because the conflict with 'status'. using "hg st" would still work as 'st' is hard coded, but this mean 'hg stack' has no short version.

testedwith: update to 3.9 This is might still 3.7 compatible but I'm no longer running the test and I would says the user base is small enough to not care.

topic: make sure we have the 'wlock' when setting topic We where writing the '.hg/topic' file without a lot. That was bad.

cleanup: removed unused mercurial.util import

compat: tolerate missing rebase extension

compat: mercurial dropped alias for hashlib.sha1

destination: add an XXX about handling destspace in destmerge This that we hopefully do not forget about this.

update: calculate 'partial' as core does

discovery: flake8

destination: flake8

style: update __init__.py

compat: adapt to the new destspace argument of destmerge The argument is currently ignored in the topic case for simplicity, but we properly accept it and propagate it to the original function to prevent crash and behavior regression in the non-topic case.

stack: prevent crash when topic is rooted on nullid We exclude null from displayed base. This was causing a crash when trying to display its description (we'll still have to handle the empty description case, but it is now less urgent).

test: add topic on the first 2 changesets too This will be used to add a test for topic rooted on nullid. We introduce this in its own changeset to reduce the noise if the actual changeset.

test: remove comment about new head warning The new head warning was buggy. This was fixed in bdc5bb223b50.

stack: also change the indexing of the t# reference Changeset 61f36480740f changed the index displayed (we now index from 1), but forgot to update the logic used to resolve the 't#' name. This changeset fixes it.

stack: change the ascii symbold for base Now that the children line go upward, '_' is no longer clear as is take the lower part of the line. We go for '^' that use the upper part.

stack: reverse the display order Most mercurial command display the most recent changeset first. We put `hg topic --list` inline with this.

topic: extract display from entry computation We are about to reverse the order of the output (most recent first) so it will be useful.

stack: start indexing at 't1' instead of 't0' I think 't0' could have special meaning (eg: before 't1', but still with topic activated) so let's keep room for that. Indexing from 1 is not crazy anyway.

commit: wrap "commitstatus" to take topic into account The "created new head" message was appearing for every single commit made on a topic. It should now properly only appears when a new head is actually created on a topic.

uisetup: add call to 'topicmap.modsetup' this was forgotten in 99c1a26abf3f. Tests did not broke because the wrapping of cg.apply only have performance impact (cache warmup).

uisetup: move all remaining wrapping into uisetup All our wrapping is now properly done at uisetup time. Hooray.

topicmap: move 'cgapply' wrapping into the topicmap module More gathering of related logic.

topicmap: move the 'usetopicmap' context manager into the topicmap module There is no good reason to not have it gathered with the rest.

patch: move setup of import/export logic into a function The function is now called during uisetup.

patch: remove version compatibility check We don't support anything under 3.7.

patch: document the section about import/export

patch: move import/export wrapping close to the function definition This gather similar logic together.

discovery: move all setup into a 'modsetup' function The various wrappings are moved into a function that live in the module and the function is now properly called during 'uisetup'.

revset: add a ui argument to 'modsetup' This is a gratuitous change for consistency with the function that use it.

revset: run 'modsetup' at uisetup time We are slowly moving away from module time wrapping. These thing should be done in the dedicated 'setup' method called by Mercurial.

destination: rename 'setupdest' to 'modsetup' the topic.revset module use 'modsetup' as a name for its setup function. It looks like a good name, lets unify names toward that.

destination: document 'setupdest' Let's make the role of this function clear.