tests: reduce dependence on previous tests for setup The tests in test-evolve-phase-divergence.t built on each other for no good reason, which makes the tests hard to modify and hard to read. This patch cleans up some of them. We should clean up the rest too, but the rest won't matter for my next patch, so I haven't bothered.

branching: merge with stable

topicmap: add compatibility for branchcache that now uses self._entries

evolve: fix over-idented block

tests: create "private" repository in already-updated state I'm going to add more copies of the repo and it's easier to work with the repo if it's already been updated.

branching: merge with stable

touch: use action "touch", not "<function touch at ...>", in precheck I just got this message: abort: cannot <function touch at 0x7fde174b69b0> public changesets: f177c51ae98f It has been this way since 1b7b9acda2a9 (touch: use precheck to validate revision, 2017-07-23).

prune: use action "prune", not "touch", in precheck We have been using "touch" since 06ee4ec88190 (prune: use precheck to validate revision, 2017-07-23). That commit modified the tests, so it kind seemed intentional, but I suspect it was still just an oversight.

evolve: test a common case of public divergence evolve: in pubdiv, handle the case when public branch is behind the mutable In public divergence, when public branch is behind the mutable one the behaviour that this patch added is that we relocate the draft one to public side. This should be fine in most case, but might be an issue in some other (eg, when the draft side of the divergence is rebase away from ancestors it relies on.) Test written by Pierre-Yves David <pierre-yves.david@octobus.net>

evolve: add condition in case of pubdiv to not swap the two div csets In public divergence, we have pinned the public cset to the local side when merge is performed. And in divergence resolution implementation divergent cset is the one who is kept at the local side, so to say this in one line: we have pinned public cset to the divergent side. However, in some cases we need to swap the "divergent" and "other" but we can't swap them in case of public divergence as thought would cause an error because of not being able to relocate public cset.

evolve: add logic to handle a particular case in divergence resolution Case is: In content divergence, to check if the two csets are on different parent or same parent what we do is find gca of the two csets and then compare it with the singlesuccessors of two csets's parents. Now, if gca is same as singlesuccessors of both the csets then we conclude that both are on the same parent which is not totally correct as it is possible that both the parents of two csets are obsolete with a single successor. This patch adds the logic to cover the above metioned case correctly, deciding the part when we need to relocate a cset to other side while resolving the stack of divergent csets. Changes in test file demonstrate that before this patch we were not doing it right because it should have relocated every node to other side instead of just relocating the first one from the stack.

evolve: add a test reflecting wrong behaviour of content-div resolution This patch shows that currently the case when stack of divergent csets have different parents is not handled correctly. For a stack of csets which has different parent, right behaviour is to relocate every node before performing merge but present implementation only relocate first cset in the stack and skip relocation for the rest of csets, this is not what we expect it to do. Next patch will be about fixing this issue.

compat: add support for new arg name in memfilectx.__init__ This makes us compatible with 550a172a603b (memctx: rename constructor argument "copied" to "copysource" (API), 2019-03-19).

evolve: preserve compatibility for hg < 4.8 versions This patch make sure evolve don't break if user using a version of hg before this 7694b685bb10 patch on hg-committed.

evolve: warn user if cset desc is being lost In public divergence when merging results in same as public cset, we only create markers to solve the divergence i.e. [(public, (other,))] In this case if other cset had a desc which was different from public that will be lost. So this print out a warning message to user that desc of non-public cset is being lost. Changes in test files reflect the added behaviour.

changelog: mention latest improvement

stack: make @ (current) more important than $ (some sort of unstable) Base is still ^ even if it's currently checked out.

stack: show content and phase divergent state and symbol Replacing ' ' with '-' is just for color labels.

stack: handle external-children just like other states This also fixes color labels: previously when external-children was combined with another state, --color=debug would show something like: [topic.stack.index topic.stack.index.current - external-children|s4] Now there is a separate label for each state.

stack: optimize revset used for stack --children Since that option needs to exclude changesets on the current stack, let's just use stack.revs (that are cached) for that and skip branch() or topic() revset. st.revs[0] is the stack base, we don't consider it actual part of stack.

stack: rename unstable -> orphan That's the only instability stack can currently show, but it's about to show more and showing "unstable" for one type of instability just isn't good.

evolvecmd: compatibility with older geteffectflag() that took a tuple Before bae6f1418a95 the function took a tuple of 2 arguments instead of these 2 arguments directly.

obshistory: remove unused geteffectflag(), it's been in core since 4.4

compat: remove old vocabulary change fallbacks Mercurial 4.4 (minimal hg version evolve currently supports) already uses the new names and in fact has deprecation warnings saying that 4.4 is the last version of Mercurial to support the old names.

branching: merge with stable

evolve: fix a typo from directory to dirty

evolve: fix the dirstate after setting parents with dirty wdir (issue5930) Before this patch, during an interrupted evolve it can be confused about copies. This patch fix the dirstate when parents are changed using dirstate.setparents() with a dirty wdir. Changes in test file reflect the fixed behaviour.

evolve: add tests which shows evolve can get confused about copies (issue5930) This test demonstrate that an interrupted evolve can get confused about copies. Next patch will fix this.

test: include some documentation to describe the case briefly

split: use ui.configoverride to preserve phase while commiting As we need to preserve the phase of revision which is going to be splitted into multiple revision. This patch use ui.configoverrides to temporarily overwrite the phases.new-commit config option at the time of committing a new node.

branching: merge with stable

changelog: add entries for the recent fixes

evolve: make sure user can recover from conflict (issue6053) we make sure while continuing interrupted evolve it reach to right code This patch fix the issue6053 which is about falling evolve into unrecoverable state and this is how it call fall into it: If after some rewrite operations we reach to a point where resparent for two content divergent csets is obsolete and we hit a conflict in relocation, so now if you run `hg evolve --continue` after resolving the conflict: code execution would check if wdir parent is obsolete and run solveobswdp() rather than going to continueevolve() part and there we will hit by a "abort: outstanding uncommitted merge" And same for `--abort` or `--stop` flags. Changes in tests reflect the fixed behaviour.

evolve: add test which shows unrecoverable evolve state (issue6053)

evolve: add a test in pubdiv where only merging leads to conflict Added a test in public divergence where both the cset are on the different parent and no conflict in relocation but in merging.

evolve: cover continue case in pubdiv when merging results in same as public This patch is the part of a series which is adding support of public divergence resolution of the case when merging results in same as pubic cset. Changes made in this patch cover the --continue flag for the case: when we had conflicts in merging. Modified lines in previously added tests reflects the changed behaviour. Also added some additional tests. I guess I have covered every possbile case in test-evolve-public-content-divergent.t While reviewing, if you see any test missed please let me know. (I think there is one test missed that I will send as a follow-up)

evolve: handle a case in pubic-div when merging results in same as public In public divergence resolution, what we do is: 1) first apply content divergence resolution 2) then phase divergent resolution on resultant node of 1) case While doing case 1 it is possible that result of merging the two csets would have same changes as public one contains. And then processing the case 2 would create an empty commit which is not something we want to do. So this patch catch that same case when merging results in same as public cset and don't create a new node, instead to solve the divergence it just add a obsmarker from "other divergent" to "public divergent" i.e. [other, (public,)] Next patch will add the continue case handling for this same case. This patch also adds the tests for the different cases which are possible for the above mentioned case. There is test for continue case too which is broken in this patch and will be fixed in next patch.

evolve: rename npublicdiv to publicnode In next patches it would make more sense to use publicnode instead of npublicdiv.

evolve: in pubdiv resolution make sure that transaction get closed Before this patch it could be possible that transaction won't get closed if res is False in the pubic divergence resolution when continuing the hg evolve.

evolve: pin the public cset to local side in merging when solving public div While working on public divergence, I think it would be better to pin the public cset to local side of merge for understanding and handling the future cases without any ambiguity. Changes in tests reflect the changed behaviour.

evolve: add tests of relocation case in public divergence These tests cover the cases when "other" is behind the "public" one and we would have to relocate "other" here. It covers all the conflicting and non-conflicting cases.

branching: merge with stable

split: make sure hg split preserve the phase of splitting cset (issue6048) Before this patch, while splitting we were not taking the phase of splitting cset into account. By default new commits would have draft changes. As we know there can two possible phases i.e draft and secret in rewriting csets thing, so this adds the handling of secret phase (as default is draft) Changes in test file reflect the added behaviour.

split: add tests which demonstrate the issue6048 Next patch will fix this issue.

evolve: fix the broken behaviour on div resolution in relocation case In content divergence resolution, I see that when "relocationreq" is True which means both the cset are on different parent and relocation is required. In this case when "divergent" is the one who is behind the "other" cset in DAG, we swap them. At this point one thing we missed is to update the evolvestate['divergent']. Because of this in continue case we didn't get the right value of obsmarkers creation. In this patch I added the code to update the evolvestate when we swap them. Now as we know "divergent" and "other" can be swapped in some cases, it is better to store the intial divergent separately in evolvestate which is evolvestate['orig-divergent'] and later this value is used to update the evolvestate['replacements'] which is the track of revisions which has been resolved. Changes in tests demonstrate the fixed behaviour.

evolve: change in a test which demonstrate divergence resolution can break This patch just add "--any" flag to "hg evolve --content-divergent" in a test and changed output reflect that there is something which is not handled correctly. After looking into code I found that it is because of using a evolvestate value which is not updated i.e evolvestate['divergent'] Next patch will fix this problem.

tests: update the title of a test as it's not what it says I see that this test has conflict in relocation and in merging also. We do have a test for the case when only relocation leads to conflict.

obsexchange: avoid importing io/StringIO module with a different name Since we're not interested in the whole module, let's shorten the imports and aviod the lint warnings. Otherwise pep8-naming complains: - import io as StringIO: N812 lowercase imported as non lowercase - import StringIO as io: N813 camelcase imported as lowercase

evolve: remove unused StringIO import

evolve: unindent some lines caught by flake8 The message was: "E117 over-indented".

branching: overwrite broken merge with a correct one Thanks goes to Anton Shestakov for spotting and fixing this.

branching: merge with stable

branching: merge with stable

obshistory: omit keyword arguments with default values in patch.diffui() calls d4c9eebdd72d made that function not take "relroot" and "prefix" anymore, and instead expect "pathfn". These two chunks of code in this patch simply generate patches for obslog -p and they broke because they tried to provide default values for "prefix" and "relroot" for no apparent reason (and also for "changes"). Let's instead rely on defaults of patch.diffui().

branching: merge with stable

test: wider another time matching in prev/next lock testing There does not seems to be a reasons for specifically matching 4-6 seconds. Wider matching will avoid intermittent failure.

branching: merge with stable

test: wider time matching in prev/next lock testing There does not seems to be a reasons for specifically matching 4-6 seconds. Wider matching will avoid intermittent failure.

topic: make topics compatible with branchmap refactor See https://phab.mercurial-scm.org/D5290

prompts: use 1-indexing in revselectionprompt() The consumer is generally a human, not a computer. I've made the mistake of entering "1" instead of "0" a few times myself.

test-split: split now ignores diff.* settings From 66399f2e92aa: "It is assumed by the author that the `[diff]` section is primarily for *viewing* diffs, and that it is unlikely what people intend when attempting to commit or revert."

pick: add --tool for hg pick to specify mergetool This patch used configuration override to enable you to pass a mergetool via the --tool flag in case there is any merge conflict.

revset: use getintrange() to parse relation subscript After 13f7a6a4f0db parsing the tokens into usable values needs to happen inside subscript relation functions.

branching: merge with stable

compat: pass contexts to _findlimit() (issue6066) Now _findlimit() in copies module accept context instead of rev number. See https://phab.mercurial-scm.org/D5595

packaging: fix debian changelog

changelog: add relevant entries

evolve: add test for the case where public divergence on difference parents This test make sure that public divergence resolution also handle the case when divergentes changeset does not share the same parent at one end because one end simply rebase. The other side has actual an actual diff change. For now this would work only for the case when we need to relocate the mutable one. Other case is still left to work on.

evolve: update the public divergence resolution logic to cover --continue case To continue the interrupted evolve in case of public divergence: we will have to store the node of that public cset which was in content divergence with the other cset, so that we can perform the phase divergence resolution between that public cset and a newnode which is the result of content-divergence resolution. Added tests reflect the behaviour this patch adds.

evolve: add logic to resolve content-divergence with a public cset Public content-divergence is the divergence where a cset is content-divergent with a public cset. To solve public divergence: 1) perform content-divergent resolution 2) resultant node is phase divergent 3) perform phase divergence resolution It is the intial logic to solve public divergence. Next patches will be the covering the cases of: 1) relocation: when we need to relocate to node 2) continue: to add this resolution in case of --continue 3) the case when content-divergence resolution gives a result similar to public cset. Added test-evolve-public-content-divergent.t reflect the added behaviour.

evolve: introduce function to create a obsmarker relation even for public cset To create obsmarkers we use obsolete.createmarkers() function, but because of security reasons this function refuses to create obsmarkers for public cset. And we need to create obsmarkers for a public cset while solving public content divergence. So introducing this function which create a obsmarker relation even for immutable cset. Currently this function create obsmarker for a single relation, in contrast of obsolete.createmarkers() which create markers for multiple relations. Upcoming pathces will be using this function.

topic: make ranges work in revset relations like 'foo#stack[1:2]'

topic: simplify #stack index check/access Also using stack.revs instead of list(stack). It's equivalent and stack.revs is @propertycache'd.

topic: make ranges work in revset relations like 'foo#topic[1:2]' Since #topic is very similar to #generations, we reuse the function directly. Few tests because #generations is already tested in core.

evolve: add description of function solveobswdp

evolve: document the "if not shouldupdate" block I missed the "not" in "if not shouldupdate: ... hg.updaterepo()" and it took a long time for me to realize it's about updating *back* to the original commit (or to its successor). Let's add a comment to maybe help the person not make the same mistake.

evolve: make "startnode" consistently be a node, not a context This fixes a bug where we didn't print "working directory is not at ..." after `hg evolve --continue` because we were comparing a node and a context.

evolve: use context managers for locks and transaction

prune: use scmutil.cleanupnodes()

uncommit: use scmtutil.cleanupnodes()

amend: use scmutil.cleanupnodes() with --patch

pick: use scmutil.cleanupnodes() A side-effect is that `pick` should now also move bookmarks.

fold: use scmutil.cleanupnodes() scmutil.cleanupnodes() has existed since 4.3 and had the metadata argument since 4.4, so we can now safely depend on it.

revset: subscriptrelations functions now have two bounds

branching: merge with stable A new version has been released

packaging: mark as development version

Added tag 8.4.0 for changeset 8c4289d0e91e

packaging: prepare release 8.4.0

minitopic: add warning about extensions state and testing

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

branching: closing test-compat branch for mercurial-4.3 We are dropping support for this version.

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge mercurial-4.8 into mercurial-4.7

test-compat: merge stable into mercurial-4.8

changelog: explicit the part related to topic

branching: merge with future version

branching: start branch for test compat with Mercurial 4.8

test-compat: reverse test change from 9bce7e6c18b3 This change are 4.9 only

test-compat: reverse test change from db87432df8de This change are 4.9 only

test-compat: reverse test change from ac39cfb5bddd This change are 4.9 only

branching: merge stable into default prior to new version

branching: merge wit stable

obsdiscovery: use consistent filtering during discovery If we computed revision using an unfiltered repository, we should run the discovery unfiltered too.

evolve: make sure we don't stop after evolution of obsparent (issue5881) Before this patch, we were not handling the case when revset given by user also contain wdir parent which is obsolete. We were explicitly checking if wdir parent is obsolete, then update to its successor and return; without checking if we still have some revisions to be evolved. This patch make sure that after it update to the successor of obsolete parent it doesn't stop and continue to evolve other remaining revisions. Changes in tests/test-evolve-issue5881.t reflect the fixed behaviour.

evolve: extract "update" code into its own function This patch moves the code to a function which handles the case when wdir parent is obsolete and evolve will just update to its successor. And extraction of this to a function will also help us to fix the issue5881.

evolve: add test case for issue 5881

evolve: add test which shows fixed behaviour of `hg evolve` (issue5686)

evolve: cover the orphanmerge part missed by lastsolved Let's cover the orphanmerge part also as it was missed at the time when we introduced "lastsolved". Chagnes in test-evolve.t reflect the fixed behaviour.

evolve: add test which shows orphan-merge resolution can result to crash It happens when there are still some revisions to evolve after evoluiton of a orphan-merge. And the reason behind crash is that `lastsolved` is not being updated and contain a wrong value which is now hidden. Next patch will fix this problem.

next: populate stacktemplate to the missed _nextevolve function

evolve: adapt for deprecated ui.progress() This makes a wrapper that has an interface like ui.progress() even though that's the old interface that will eventually go away. That's because it's a lot easier to convert from the ui.progress() to the ui.makeprogress() interface than the other way around. Once we no longer support hg<4.7, we can migrate our callers to ui.makeprogress() and drop the wrapper.

fold: sort concatenated commit messages in topological order It seems better to have the proposed commit message look the same whether the user ran `hg fold --exact -r . -r .^` or `hg fold --exact -r .^ -r .`.

topic: make revsets like 'foo#topic[0]' work Essentially, 'topic' relation subscript function is the same as 'generations', but is limited to revisions marked with one particular topic.

changelog: add an entry about the revset stack indexing

test: adapt output to minor behavior change CORE-TEST-OUTPUT-UPDATE: bad05a6afdc8

tests: remove unused variable and needless subshell in testlib/pythonpath.sh

branching: merge with stable

tests: conditionalize some output for Windows A couple of these were already present, but out of place.

test-pyflakes: use '/' when printing the files to check If paths are printed with '\', `xargs` sees the parts allsmooshedtogether, and pyflakes errors out.

tests: fix PYTHONPATH manipulation on Windows Without the semicolon separator and quotes, the variables ends up like this: c:\Users\Matt\projects\hg-evolve:c:\Users\Matt\projects\hg-evolve: c:\Users\Matt\projects\hg;c:\Users\Matt\projects\hg-evolve\tests; c:\Users\Matt\projects\hg\tests That in turn makes the local evolve code unreachable, and the system installed code is tested instead. I'm testing against `uname` instead of a trivial python script printing os.name because maybe one day tests will run on WSL.

exthelper: update documentation with some examples for using registrar aliases

exthelper: simplify the ability to register filesets Same mechanism as revsets earlier in this series.

exthelper: simplify the ability to register templates Same mechanism as revsets earlier in this series.

exthelper: simplify the ability to register revsets I think this is what Yuya and Boris agreed on.[1] This happens *after* the extsetup phase now (and after the _aftercallback notifications). But this is trivial, mergeable between exthelper instances, and doesn't need to have the extension name supplied when registering. [1] https://www.mercurial-scm.org/pipermail/mercurial-devel/2018-December/125888.html

exthelper: support the option argument when registering a command Largefiles uses this 5th argument with push and pull, so this will be tested in the next commit. I assume the reason for unrolling and reforming the tuple in each finalxxxsetup() is to validate that something proper was passed in when registering. But it's better to explode when decorating than during the delayed actual registration.

exthelper: simplify configitem registration

exthelper: avoid a [] default arg to wrapcommand()

configitems: move the default values to the registrar decorator The exthelper refactoring of configitems stopped registering dynamicdefault for everything, which in turn causes a lot of warnings about mismatched defaults. There are a few stragglers- I didn't fix topic-mode because I wasn't sure what the default should be, and the alias for odiff was explicitly given a default for compatibility.

topic: make revsets like foo#stack[-1] work too We remove base commit when n < 0 because it's confusing to see base (which technically isn't a commit inside the stack) at both 0 and -n.

topic: make revsets like 'foo#stack[0]' work 'stack' relation subscript function is another way to refer to s0, s1, etc. But instead of aborting in many cases it will simply return an empty set.

exthelper: remove '_' in final_xxx() function names to conform to hg style

branching: merge with stable

packaging: mark as development version This avoid confusion when installing from source.

Added tag 8.3.3 for changeset 97b18934d6db

packaging: prepare version 8.3.3

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge stable into mercurial-4.7

evolve: detect unresolved conflict during evolve --continue (issue5966) Evolve --continue was ignoring unresolved conflict, proceeding with its operation without any check. This is now fixed. This test case was built and formalized by Matt Harbison and Anton Shestakov.

tests: filter out uninteresting log events Core has new ui.log() calls added (for tracking extension loading and performance, for example), but in test-discovery-obshashrange.t it produces a bunch of lines that are unrelated to the test. So we filter them out to not touch test output. This is inspired by 1de3364320af in core.

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge stable into mercurial-4.7

linter: silence rightful complains about unused variable

topic: merge _showlasttouched logic into _listtopics Makes --age work with --verbose.

topic: simplify _showlasttouched and _getlasttouched (and its data structure)

branching: merge with stable

split: add a --interactive flag While the interactive mode is useful for end-users, there are some cases where they don't need the interactivity overhead. Moreover, this allow the split command to be used in automated scripts.

split: take file patterns to limit selection on matching file patterns When splitting a big changeset, the user often wants to extract specific files from the changeset while leaving the others files intact. The split command can now be called with multiple file patterns. Only files that match one of the patterns will be shown in the interactive selection. The user will be able to create one or more commits with those files. When the user finishes splitting the matching files, a last commit will be made with the remaining of the files.

split: only accept explicit revision through the `-r` option We are about to introduce new non-optionnal arguments to defines files patterns. To avoid confusion and to be closer to the standard options, only accepts revisions with the `-r` option.

issue-6028: resolves 6028 - return (False, ".") instead of (False, '') Since 4.8, repo[] no longer takes an empty string, so we update to a valid with similar semantic. This value is strange and we should probably use an actual node ID here, however, this is an independent issue.

branching: merge with stable

tests: add sparserevlog cap since hg now has sparse revlogs by default CORE-TEST-OUTPUT-UPDATE: 3764330f76a6

split: rework the prompt to be more standard We dropped the initial capital and moved to a positive question.

split: add a option to discard remaining change during split This is useful to drop unwanted remaining change spotted during the split.

split: add a way to abort a split from the prompt This prompt is asking the user about the next step. Offering to abort there make sense.

split: add a help entry to the final prompt We are about to add more option in this prompt. Adding a way to document then seems like a good first step.

topic: make revset argument messages be similar to such messages in core

tests: don't forget to add hg serve pid to DAEMON_PIDS in test-wireproto.t Otherwise it leaves a process running after each run-tests.py launch.

test: adapt to change output change on default We now have a `wcache` directory in `.hg`.

safeguard: don't reimplement auto-publish if it's in core (will be in 4.9)

safeguard: the new default for auto-publish is 'publish'

stack: add a --children flag to stack If a commit in the stack has been merged outside the current topic, show a trailing status of (external-children)

extensions: avoid shadowing imported module names with exthelper methods The previous code worked, but confused pyscripter.

extensions: add fileset support to exthelper This will be tested by using it in lfs.

extensions: add uipopulate() support to exthelper

exthelper: clarify copyright and licence for the module The exthelper is quite useful and Matt Harbison is looking into having it upstreamed. We clarify the legal situation first.

packaging: merge with version 8.3.2

packaging: mark development version This help reduce the confusion when people install from source.

Added tag 8.3.2 for changeset 7edc5c148df0

packagin: prepare release 8.3.2

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge stable into mercurial-4.7

changelog: add information about the topic message improvements

branching: merge with stable

evolve: update the abort to a ProgrammingError This error should be a ProgrammingError and as Pierre-Yves David said ProgrammingError type did not existed when this code was written, so lets update this now.

topics: improve the message around topic changing The new message says 'cleared' when topic name is cleared, if we change to a new topic name, it mentions the new topic name too.

tests: fix for POSIX compliance * Mac ls will exit with a different message and exit code [1], replace with grep (which is what mercurial tests do) * POSIX echo has no -n switch, use printf instead

style: remove unused variables Both `as e` references are not used and can go.

evolve: fix a documentation typo

compat: drop 4.3 related obsfate code All the necessary piece are supported starting 4.4.

compat: drop code dealing with incompatibility for --publish with 4.3 We dropped 4.3 support.

compat: clarify when some conditional are used The middle condition was an intermediate state that never existed into a release. We can safely drop it.

compat: drop 4.3 "new troubles" report code This is supported natively for Mercurial 4.4 and above.

compat: drop 4.3 wrapping of createmarker for effect flag support This is supported natively in 4.4 and above.

compat: drop 4.3 monkey patch of `copies.mergecopies`

compat: drop 4.3 compatiblity code for `obsutil.allprecursors` function

compat: drop 4.3 compatiblity code for `ui.edit` method

compat: drop 4.3 compatiblity code for 'successors' revset

compat: drop 4.3 compatiblity code for 'precursors' revset

compat: drop Mercurial 4.3 support for exthelper The last release email noted plans to drop 4.3 and 4.4 support in the next feature release. I'd like to move this code into core, and dropping this should allow the class to be copied in unmodified.

compat: update metadata about minimum ag version

next: solve the issue of `next` get confused by split This patch solve a problem of next command which get confused by split. Let me describe how it was getting confused: Initial state of repo: A---B---C After splitting B to (B1,B2): @ A---B1---B2 \ ---B---C X * (note: C is orphan; checkedout to B1) Lets make an amend on B1: @ B1' / A---B1---B2 \ X * \ ---B---C X * Now, if run `hg next` (--evolve is True by default now): $ it would give you choice to choose from B2 and C thinking that C could also be a possbile children for B1, instead of stablizing B2 on B1. I fixed this problem by filtering those aspiring children which can be stablized on one of the aspiring children itself. Changes made in test-prev-next.t shows the changed expected behaviour.

next: add test which shows that `next` get confused by split

cleanup: avoid a Yoda condition

evolve: modify and move the comment to appropriate position

next: update the command description Now, if necessary next command evolve the next child revision by defualt. You don't need to pass the --evolve flag.

next: make next command --evolve by default Before this patch, if we need to evolve to update to the next child, we were suggesting the user to use --evolve flag. This patch make some changes to evolve by default in that conditions. After making next command to evolve by default we have to consider the following points: 1) If we don't need to evolve while updating to the next child: a) And if wdir is dirty, we suggest to use --merge flag b) if wdir is clean, we simply update to next child (if ambiguous, prompt the user to select one) 2) If we need to evolve: a) when wdir is dirty, we suggest the user to use `hg shelve` first, to make wdir clean. As we don't support --merge while evovling. b) when wdir is clean, we evolve the next cset. Changes made in test-prev-next.t reflect the changed behaviour.

safeguard: allow push to succeed (and without warning) with --publish

topic: only add --publish flag to push if it's not already there

safeguard: check auto-publish value before sending listkeys command Always sending listkeys command is just wasteful, let's first make sure users even care about auto-publish behavior.

style: silence another flak8 warning Default should be green now.

oops: backed out changeset df22f010cf24 pushed by error The changeset still fails some test

next: make next command --evolve by default Before this patch, if we need to evolve to update to the next child, we were suggesting the user to use --evolve flag. This patch make some changes to evolve by default in that conditions. After making next command to evolve by default we have to consider the following points: 1) If we don't need to evolve while updating to the next child: a) And if wdir is dirty, we suggest to use --merge flag b) if wdir is clean, we simply update to next child (if ambiguous, prompt the user to select one) 2) If we need to evolve: a) when wdir is dirty, we suggest the user to use `hg shelve` first, to make wdir clean. As we don't support --merge while evovling. b) when wdir is clean, we evolve the next cset. Changes made in test-prev-next.t reflect the changed behaviour.

next: improve the message for dirty working copy with --evolve This will be important soon when --evolve will be the default.

next: use the `hint` argument of bail if changed The argument is availabel since Mercurial 4.1. So let's use it.

prev: use the `hint` argument of bail if changed The argument is availabel since Mercurial 4.1. So let's use it.

next: explicitly specify --no-evolve in the tests The default value for this flag is about to switch.

branching: merge with stable

style: fix various flake8 warning

next: set if we need to evolve or not; also move logic to appropriate pos set the value `needevolve` and also move the logic to find aspiringchildren to appropriate position i.e before we suggest user to use other flags like --merge.

next: move some code to prepare for `next --evolve` by default Moved some values before the block where we suggest the user to use --merge flag. As we would need these values to find if we need to evolve or not before we can suggest user to use `--merge` flag. We will suggest user to use `--merge` flag only when we don't need to evolve. Because currently we don't support both --evolve(going to be True by default) and --merge at the same time.

branching: merge with stable

topic: improve UX by using pager only when we should Before this patch we were using pager in every case of topic command, either it is setting up a new topic or clearing the active topic. After this patch it will not use pager in following commands: $ hg topic [TOPIC] -r [rev] $ hg topic --clear

evolvecmd: _possibledestination() skip visiting empty parent I see that even in the case when "parent == -1" we are visiting that also and find succsets for that and in last -1 is being added in the set of possible destination. Why not skip that?

pick: `hg help` was not showing the full cmd desc of `pick` after running command `hg help` it was not including the second line of command description. I guess it picks the firstline only. So I moved that part in first line of cmd description.

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5

test-compat: merge mercurial-4.7 into mercurial-4.6

test-compat: merge stable into mercurial-4.7

compat: fix fixedcopytracing compatibility with mercurial 4.8 and narrow Mercurial 4.8 version of _fullcopytracing includes some new narrow code. As https://phab.mercurial-scm.org/D3896 has not yet landed, update fixedcopytracing behind a version detection condition. This was spotted by Augie Fackler.

utility: don't translate commit messages in revselection prompt (issue6016) Commit messages should not be translated and should be shown the same. I am not sure if I can add a test for this by creating a commit with non-ascii character in commit message.

evolve: use stack template in --continue case also We use stack indexes (s#) in evolve msging when revs being evolved are in active topic. Before this patch we are not covering the --continue case. So this patch cover the same and use the stack indexes s# even when we continue an interrupted evolve. In this patch I used the same concept (to check if we should use s#) as we are using in cases other than `--continue`. Thanks to PYD for refactoring those lines. Changes in tests also reflects the expected behaviour.

evolve: add test showing currently stackalias fails in --continue case

branching; merge with stable

packaging: mark version as devel version This avoid confusion from people installing from source.

Added tag 8.3.1 for changeset b90422a11a88

packaging: prepare version 8.3.1

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge mercurial-4.6 into mercurial-4.5