corecompat: update the tests output to show phase update summary eb9835014d20 in core added support to transactions to show a summary on the phase changed during that transaction. Due to this, couple of tests output needs to be updated. This patch does that. While realeasing evolve, this patch should be backed out on branches where hg<=4.6. CORE-TEST-OUTPUT-UPDATE: eb9835014d20

CHANGELOG: add an entry about issue 5808 being fixed

next-prev: replace the error hint to mention about `--merge` flag

tests: add tests for conflicts while respecting commands.update.check This patch adds tests to check that we don't run into conflicts while respecting commands.update.check. The error message now does not show the hint about --merge option which we should fix.

next: respect `commands.update.check` config option in `hg next` (issue5808) `commands.update.check` config option determines what level of checking should be done when we update to another revision. When we set this config option to `noconflict`, it updates your working directory to a specified revision only when there will be no conflicts which is a very nice behavior. This patch adds logic to respect the config option so that we can have that nice behavior with `hg next` too. It turns out, we just needed to use hg.updatetotally() and add some cases to check config option. Right now, we only respect the config if value is set to `noconflict`. Otherwise we fallback to the default behavior. This is a part of fixing issue5808. Test changes demonstrate the fix.

prev: respect `commands.update.check` config option in `hg prev` (issue5808) `commands.update.check` config option determines what level of checking should be done when we update to another revision. When we set this config option to `noconflict`, it updates your working directory to a specified revision only when there will be no conflicts which is a very nice behavior. This patch adds logic to respect the config option so that we can have that nice behavior with `hg prev` too. It turns out, we just needed to use hg.updatetotally() and add some cases to check config option. Right now, we only respect the config if value is set to `noconflict`. Otherwise we fallback to the default behavior. This is a part of fixing issue5808. Test changes demonstrate the fix.

tests: add test demonstrating issue5808 This patch adds test showing that `next` and `prev` does not respect the `commands.update.check` config option, particularly when set to `noconflict`.

next: bail out early in `hg next --evolve` if dirty wdir This patch adds logic to bail out early when --evolve is passed with next command and the working directory is dirty. This will help us in preventing the message saying `do you want --merge` which is useless and misleading when `--evolve` is passed.

tests: add test of `hg next --evolve` with dirty working directory I was testing some output change to `hg next --evolve` in dirty working directory and found that we don't have any test for that.

CHANGELOG: add an entry about fixing issue5897

evolve: fix `hg abort` when hg next --evolve leads to conflicts (issue5897) Before this patch, if you do `hg next --evolve` and end up having conflicts and then you try `hg abort`, it will throw a KeyError. This patch fixes that.

tests: add a test demonstrating issue5897 When conflicts are caused due to `hg next --evolve`, `hg evolve --abort` breaks! This patch adds test to demonstrate that. This will be fixed in next patch.

evolve: add an `--update` flag to `hg evolve` command This patch adds a new `--update` flag which defaults to True. The update flag updates the working directory to the head of evolved revisions after `hg evolve` command. This flag can be used to not update your working directory after `hg evolve` which has been one of the biggest feature request from fig team at Google. To not update your working directory, the user can do `hg evolve --no-update`. If the working directory get obsoleted by evolve command, it will update to the successor. This patch also adds some basic tests for the flag introduced.

tests: add tests for testing --abort while content-divergence resolution This patch adds a new test file with a very basic test of `--abort` on an interrupted evolve which was resolving content-divergence. Upcoming patches will add more rigourous tests.

evolve: fix storage of replacements and temprevs node in evolvestate The _completephaseivergent() was not respecting rules on how to store the new node ids created in evolvestate. The rules are: * store the temporary relocated commits in temprevs * store the final new commit in replacements This patch make sure we follow the above rules and also use the return value returned by _resolvephasedivergence(). The tests change demonstrates that we are all good now.

tests: add more tests related to aborting while resolving phase-divergence The tests shows the something is still broken related to abort while resolving phase-divergence which will be fixed in upcoming patches.

topic: suggest to clear a topic that becomes empty We add a hint suggesting "hg topic --clear" when a topic becomes empty. This usually happens when all its changesets get public, that is when the user does a 'phase -p' or when they pull from a server. To discriminate relevant cases for which we should display the hint (and typically exclude explicit 'hg topic --clear' operation), we look for the transaction "type" to only consider 'phase' or 'push' transaction. In the latter case, the transaction name is not simply 'push-response' but it also included the remote URL so we need to match on string content.

topic: display a hint pointing at help when a topic becomes non-empty This is an attempt at avoiding "mistakes" by new users of topics when they pull a topic and publish its changesets while being checked out. In this case, the topic will become empty but still be active; however, if this is a "foreign" topic, the user will not likely want to keep it active for the next commit operation. So we add a hint message pointing at general help of "topics" command so that they can eventually do something and learn about "hg topics --clear".

branching: merge with compat fix on default

evolve: add compat for repair.stripbmrevset which is moved to scmutil This patch adds compatibility logic for repair.stripbmrevset() which is moved to scmutil as bookmarkrevs(). This fixes test-prune.t failure.

evolve: update the readme with more information about contribution

topic: dedent items about publishing behavior in docstring Also change item bullets from '#' to '*'.

topic: use preformatted block for config snippets documentation We add :: markers, empty line and properly indent blocks where needed.

tests: add a test for "hg help -e topic" Currently, some configuration snippets do not render well; we'll fix this in forthcoming changesets.

branching: merge with stable

content-div: add test showing `--stop` works during interrupted resolution This patch adds a test showing that the --stop flag of `hg evolve` works well during interrupted content-divergence resolution. The --stop flag now works with all the three different type of instability resolution very well and we should advertise it more.

evolve: create new commit while resolving content-divergence Before this patch, we used to amend one of the content-divergent changes with the changes from the merge. Creating a new commit will certain advantages like letting user enter a commit message, showing user the new merge diff before commiting the content-divergent resolution and give us more control in the implementation part. The reason amend was used initially was just because it was easy. There are some tests update due to change.

content-divergence: store the resolved revs in evolvestate['replacements'] The support for continuing a conflicted content-divergence resolution was added some time ago. That support lacked storing of the resolved rev in the evolvestate['replacements'] which marks the node as resolved and does not try to resolve that node again. Since we didn't store, the resolution, processes the same node again. This patch makes sure we store the information in evolvestate that a certain content-divergent node is resolved to prevent pre-processing it again.

utility: use ui.interactive() instead of checking config value Before this patch, the rev selection prompt which pops up in case of ambiguity to ask user to select a rev used to check the config value of ui.interactive which can is by default set to None. We should use ui.interactive() instead which is more smart in such cases. Thanks to martinvonz for suggesting this.

evolve: make `--abort` strip the temporary revs created during resolution During divergence resolution, `hg evolve` created temporary relocation commits which needs to be stripped off during `hg evolve --abort` to get back to the same state where we were. Previous patch added a new list temprevs to be stored in evolvestate. This patch starts storing the temp relocated node created during phase-divergence resolution in evolvestate and make sure we consider stripping it too while `hg evolve --abort`. The test changes demonstrate the fix. Now we are sucessfully aborting a phase-divergence resolution.

evolve: store a list of temprevs in evolvestate There are temporary revisions which are created as a part of divergence resolution which needs to be stripped off if user runs `hg evolve --abort`. We need to save the nodeids of those temporary revisions in the evolvestate. The temprevs list will help in the above mentioned use cases.

evolve: check for None before adding in set of revisions to strip After previous patch, replacements can contain None. Let's make sure we don't add None to the revisions to strip during `hg evolve --abort` The test changes demonstrate the usefulness of this and the previous patch. Now abort is working and public changesets are not a problem.

evolve: return the new replacement node to be stored in evolvestate While resolving phase-divergence, we can end up obsoleting the phase-divergent commit in favor of the public commit. Before this patch we return the node of public commit to store as a replacement of the phase-divergent commit. The above will not cause any problem till the time we use `hg evolve --abort` on an interrupted evolve which tries to strip the replacement nodes because it thinks that the replacements nodes are the ones which are created during the resolution and are new. Since we will be stripping a public node, `evolve --abort` will error out saying cannot strip public changeset, unable to abort evolve which is bad. We should make sure, replacements should only consist of new nodes formed. If the instablity is resolved by obsoleting in favour of old changeset, we should not store the old changeset in replacements in evolvestate.

evolve: don't make values of replacements dict lists There was inconsistency in code base related to the values stored in replacements dict in evolvestate. At some places we store a list, at some places we just store the nodeid. Let's make sure we store only the nodeid, not a list. If there are cases, when there are multiple replacements or changesets created during resolution, later patch will introduce storing temprevs in evolvestate which should be used.

tests: add a test file `--abort` flag while resolving phase-divergence This patch adds a new test file test-evolve-abort-phasediv.t which will contain tests for `hg evolve --abort` flag while resolving phase-divergence. There is a case in this test which does not work right which will be fixed in upcoming patches.

evolve: pass revisions as strings to commands.*() It's usually fine to pass integer revisions to e.g. commands.update(), but when directaccess is enabled, it attempts to parse it a revset, which fails.

tests: rename test-evolve-abort.t to test-evolve-abort-orphan.t We renamed the test file because it contains all the cases related to orphan resolution. Now we care about divergence resolution too and hence we must have separate specific test files for each type.

branching: merge with branch for stable

compat: update obshashrange test output Mercurial core bfe8ef6e370e seems to have changed the order of some messages. Simply accept the change in the test file. CORE-TEST-OUTPUT-UPDATE: bfe8ef6e370e

test: update to new outputs Mercurial core ea63a2004d09 update the hidden changeset warning during update after the effective update. CORE-TEST-OUTPUT-UPDATE: ea63a2004d09

compat: fix obslog with Mercurial 4.6+ Mercurial core 3fe1c9263024 removed the diffopts attribute on changesetprinter. Backport consuming diffopts in the constructor for old versions of changesetprinter and update the non-graph code to extract the patch option and pass it directly.

debian: add line to clean-docs target to delete additional docs file

amend: use context manager for locks (issue5887)

evolve: point to '--abort' in verbose status message f6979d64b9fb (evolve: point to '--abort' in error message, 2018-04-22) changed "hg update -C ." to "hg evolve --abort" in error messages. This commit makes the same change in the verbose status message (the one that warns about unfinished evolve). There's still one mention "hg update -C" in our codebase. That's after "hg evolve --content-divergent" fails, but I don't think "hg evolve --abort" works in that case (yet?).

evolvecmd: add comments and new lines in content-divergence handling logic I have visited this logic three times in last 10 days and I have to re-read the whole code to make sure I don't miss any part. Adding comments will help understanding the code in better and fast way.

evolve: show cset hash in "merging conetnt-divergent changeset" While I was here I also mae de it repo.ui.status() instead of repo.ui.note() to align the behavior with rest of the messages.

evolve: show cset hash in "update to local conflict" message

evolve: use hg.updaterepo() instead of hg.update() to hide stats

evolve: fix the conflicts error message during content-divergence resolution Before last patch, we didn't had an automated way to continue an interrupted content-divergence resolution and we used to show a very long error message on how to continue manually. This patch replaces that long error message with nice small message which tells how to continue and how to abort. We still show `hg update -C .` to abort as we need to test and make `--abort` work in case of content-divergence.

evolve: add logic to continue interrupted content-divergence resolution We continue the interrupted content-divergence using the logic to complete content-divergence which we refactored in it's own function few patches ago. We had to delete evolvestate file before using cmdutil.amend() because otherwise we can't use the function. This leads to a hack which deletes the evolvestate file, we may want to not to use the high level API function here. Also we had to pass evolvestate also to _completecontentdivergent function because of this. This patch also, adds a test which demonstrates that the logic works fine.

evolve: store the evolvestate file when encountering conflicts This patch makes `hg evolve` store the evolvestate file when it encounters merge conflicts while resolving content-divergence.

evolve: take out logic to complete phase-divergence in separate fn This patch takes out the logic to complete the content-divergence resolution to it's own separate function so that we can reuse it in case of interrupted resolution.

evolve: store divergent nodes in evolvestate when resolving content-divergence We need to store the divergent nodes in evolvestate so that we can continue an interrupted phase divergence resolution.

branching: merge stable into default

tests: add test showing `hg evolve --stop` works fine with phase-divergence This patch adds a new test file which contains test demonstrating that `--stop` flag works well while resolving phase-divergence using `hg evolve`.

tests: rename the test file to add 'orphan' in the name test-evolve-stop.t contains test for `hg evolve --stop` for orphan resolution only. We also need to test the flag while resolving divergence. It will be good if we have a test file for each type of instability.

tests: test that `hg obslog wdir()` aborts with a useful message

obshistory: make obslog work when a commit doesn't have any description This logic is taken from logcmdutil.changesetprinter class. It checks that commit description is not empty before extracting the first line (before this patch it would try to index an empty list). Stripping description also makes obslog behave more like regular log when there are trailing/leading whitespaces.

obshistory: use a more appropriate type for obslog entries cand is actually a regular changeset and not 'M' (graphmod.MISSINGPARENT). And 'M' is only used for graph edges, but cand is drawn as a graph node. Visually there's no effect, but the code makes more sense this way.

packaging: mark as development version This help avoiding confusion when installing from source.

branching: merge with latest release

packaking: mark as development version This avoid confusion when installing from source.

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge stable into mercurial-4.5

Added tag 8.0.0 for changeset 116cdd8c102a

packaging: update version number

packagin: update `tested-with` statement

changelog: mention 4.6 compatibility

Changelog: pre-version gardening

testcompat: update output for Mercurial 4.3 Lets of minor update + one major update to tests/test-evolve-phase-divergence.t since all hashed chance (different instability name).

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

testcompat: revert output change from new capabilities This new capabilities is 4.6 only.

testcompat: revert output change from 54a469cd5b26 These are 4.6 only changes.

testcompat: revert output change from 1de6ba0ac6d7 These are 4.6 only changes.

testcompat: merge stable into mercurial-4.5

compat: handle different `ui.edit` signature with Mercurial 4.3

wirepeer: try modern module first This avoid some issue with remaining .pyc

compat: handle lack of allpredecessors for Mercurial 4.3

branching: merge further fix into stable

wrapping: fix a silly error were we checking on module and wrapping the other ...

brancing: merge next release into default We are about to release hg-evolve 8.0.0

test-compat: open mercurial-4.5 branch

evolve: point to '--abort' in error message The way to escape and evolve run has been updated and we need to tell our user about it.

compat: drop compatibility layer for pager All versions we support now support `ui.pager`.

compat: drop compatibility layer for duplicatecopies We no longer support version before Mercurial 4.3.

compat: drop compatibility layer for bookmark.applychanges We now only support Mercurial version down to 4.3.

compat: from compatibility layer for allprecursors We only support down to 4.3 now.

compat: drop compatibility layer for successorssets We support down to Mercurial 4.3 now.

compat: drop compatibility wrapper for "relevantmarkers" We no longer support version without the logic we have been adding.

compat: drop compat layer for cleanupnodes We no longer support version lower than 4.3.

compat: from compatibility layer for createmarkers We support down to 4.3 now. It supports operation.

compat: drop obsutile layer Mercurial 4.2 is no longer supported.

compat: drop vfsmod compat layer Mercurial 4.2 is no longer supported.

evolve: use in code filtered error for 4.6 Things have been upstream into core for a while, let us use them instead of the evolve version.

documentation: refer to 4.3 in the help text Minimal version supported is now 4.3. Drop reference to 4.2 in the help.

topic: remove compatibility for older version in discovery wrapping Support for 4.1 and 4.2 has been dropped.

obscache: drop compat layer to access public changeset We can now access precomputed sets. (compat to 4.1 and 4.2 dropped)

obscache: drop compat layer for obsmarkers reading We cna now use a version with the argument we needs.

template: drop compatibility layer Support has been dropped for 4.1 and 4.2

timer: drop compat layer for time Support for 4.1 and 4.2 has been dropped.

compat: drop support for Mercurial 4.2 Since Mercurial 4.6 is about to be released, we drop support for 4.2 too. (code still need to be cleaned up).

compat: close test-compat branch for mercurial-4.2 Support for this version have just been dropped.

evolve: add support for hg >= b4d85bc1 Mercurial commit b4d85bc1 deleted the wireproto module and its contents are now in various other modules, so we can not even do unchecked imports of it now.

discovery: handle deletion of 'wireproto' module Mercurial commit b4d85bc122bd. deleted the wireproto module and its contents are now in various other modules, so we can not even do unchecked imports of it now.

evolve: handle wireproto module deletion for registering new commands Module have been deleted in b4d85bc122bd. We can no longer import it blindly.

minitopic: handle wireproto module change from b4d85bc122bd This module have been scattered in other place, so we need to detect and handle this for 4.6+

topic: handle wireproto module change from b4d85bc122bd This module have been scattered in other place, so we need to detect and handle this for 4.6+

obsexchange: remove unused import of wireprotoserver This seems to be unused since 300d7d019b9.

compat: rename resolvepartialhexnodeid to resolvehexnodeidprefix The name changed in 5f8f013e7d52

compat: access datestr in a way compatible with verison prior to 4.6

compat: fallback to compatible partial lookup prior to 4.6

import: adapt to fd1dd79cff20 With the latest state of the code, the patch is passed to "import try one" as parsed.

import: grab the expected node value on the fly We no longer parse the patch beforehand this will reduce inconsistency with newer API.

import: use a less direct approach to store the expected node This will help later refactoring.

compat: adapt `amend --patch` to the new `patch.extract` API

compat: deal with change in the wireproto module

branching: merge with stable

topic: allow '.' in topic names This is also commonly used.

relocate: look up partial nodeids in unfiltered repo This accidentally changed to using the filtered repo in commit 0f0f3135.

compat: avoid using partial node ID in lookup This is getting deprecated in 4.6.

test: apply output change from protocaps CORE-TEST-OUTPUT-UPDATE: afcfdf53e4b5

test: update output to match upstream The exact wording for filtered error has been changed. CORE-TEST-OUTPUT-UPDATE: ecd3f6909184

evolve: don't pass stringified int to repo.__getitem__ We were doing repo['-1'], which is now deprecated. Switch to repo['tip'], which is much clearer anyway (I initially thought this was nullrev and sent an incorrect patch until Pierre-Yves corrected me).

patch: offer the user a chance to fix the patch if it fails to apply The experience is still not great, but better than purely dropping the changes.

amend: add a new flag `--patch` to `hg amend` This patch adds a new flag `--patch` to `hg amend` which pops up an editor with the patch of working directory parent which you can change, and when you exit the editor the patch with changes is applied to current working directory with old changeset being obsoleted in favour of new one created by the applied patch. If supplied filenames, only those filenames are present in the popped editor and rest files stay the same way in the commit as they were. The extension of the file which opens up in editor is '.diff', we cannot have it as '.patch' as there will be develwarns related to that. We need to change to patch core and undo some change to achieve this. The implementation does not use any core API rather it has picked chunks from API which are required. One main reason to not use core import API is that we have to change wdir parent before using patch.patch() which I will like to avoid to make sure we handle merge cases too. While writing this patch I have spend lot of time try to use internal API's to work for this but none of them served the purpose well. If I have time in future and work on similar problem again, I am going to write better high-level API's which uses patchstore to achieve this. A new test file test-amend-patch.t which contains a lot of testing of the feature.

stablerangecache: include units in ui.progress() calls

stablerange: include units in ui.progress() calls

tests: add test demonstarting issue5833 is fixed Previous patch which fixed issue5832 also fixed issue5833 as the root cause for both was same. This patch adds test of issue5833 as well. CHANEGLOG entry is also added for the fixed issues.

utility: convert node from MultipleSuccessorsError to rev numbers (issue5832) utility.builddependencies() deals with rev numbers but MultipleSuccessorsError returns nodeid which breaks the function and also breaks instability resolution. Previou patch demonstrate the breakage. This patch makes sure we convert those nodeids to rev numbers before processing ahead.

tests: add a test demonstarting issue5832 traceback The traceback will be fixed in upcoming patches.

CHANGELOG: add an entry about `hg evolve --abort` Previous patches added a new flag `--abort` for `hg evolve` which aborts an interrupted evolve. Currently this only works for orphan resolution cases which is very common and most people use `evolve` for that. So let's add an entry about that.

evolve: restore bookmarks correctly after `hg evolve --abort` This patch adds logic to store bookmark movements in evolvestate class and restore bookmarks to their original place if `hg evolve --abort` is called.

topic-ext: restrict the format of topic names This patch restrict the format of topic names to make sure they consist only of alphanumeric, '_' and '-' characters.

serverminitopic: wrap context.changectx.branch instead of context.changectx Recently some changes in core resulted in this wrapping of class leading to an infinite recursion. Let's wrap the particular function instead of wrapping the whole command. This fixes test-minitopic.t which was breaking.

templatekw: remove obsfatedata templatekw Individuals fields are available in core as single template functions.

evolve: do not exit 1 when there are no troubled changesets (issue5823) There are possibly other cases we also do not wish to exit non-zero for in this function, but I did not analyze them closely and am just looking at resolving issue5823.

changelog: add an entry about the memory fixes

safeguard: use self instead of repo in noautopublishrepo.checkpush() Referring to repo here was somehow preventing it from being garbage-collected (important in hgweb, where currently every request gets a new repo).

stablerangecache: use self instead of repo in stablerangerepo.stablerange() Referring to repo here was somehow preventing it from being garbage-collected (important in hgweb, where currently every request gets a new repo).

obscache: use self instead of repo in obscacherepo.updatecaches() Referring to repo here was somehow preventing it from being garbage-collected (important in hgweb, where currently every request gets a new repo).

templatekw: fix templatedata for 46

style: fix a couple of pyflakes complains

evolve: add a `--abort` flag for `hg evolve` command This patch adds a new flag `--abort` to `hg evolve` command which will abort the interrupted evolve going on undoes the changes created by the evolve command till now. The changes are bookmark movements, creation of evolved commits, obsolete the old commits in favor of evolved commits. In case when user changed things while the interrupted evolve, like did some actions which created a new commit on top of evolved commits, or changed phase of evolved commits to public, the evolve fails to abort as we should not strip out the new commit formed by user neither we can strip the public changeset. The abort fails and tell user to use `hg evolve --stop` instead. Right now bookmark movement is broken, and will be fixed in upcoming patches. Tests are added for the new flag.

evolve: don't allow updating or commiting when there is interrupted evolve We should make things simple in the starting and restrict user from doing things which can lead to problems. This is same as the rebase behavior.

evolve: internationalize the entry of --list in hg evolve help

evolve: add evolvestate as an argument to _finalizerelocate() This will help us to store bookmark changes to evolvestate to revert them in case when `hg evolve --abort` is called.

evolve: add evolvestate as an argument to evolvecmd.relocate() This will help us in passing it to _finalizerelocate() and store the bookmark changes which happend.

tests: add test about handling phase-divergent merges We don't handle phase-divergent merges and we should. Upcoming patches will add the ability to handle them.

evolve: show a message when evolution leads to no changes to commit In case of orphan resolution, evolution may result in no changes to commit. This patch adds a use message in such cases. This is same as the rebase behavior.

evolve: pass the instability category to relocate() and _finalizerelocate() This patch adds category argument to relocate() and _finalizerelocate() functions to take the type of instability which we are processing so that we perform actions accordingly.

tests: add more tests for solving phase-divergence using `hg evolve` This patch adds more tests for resolving phase-divergence caused due to fold or split using `hg evolve` command. The resolution in case of split is not very good and will be fixed in upcoming patches

evolve: handle interrupted phase-divergence resolution gracefully This patch adds logic to handle the interrupted phase-divergence resolution by `hg evolve` command gracefully. We first complete the relocation of the changeset and then do the divergence resolution. Previous functions moved required code separate fucntions so that we can use them here.

evolve: move logic to resolve phase-divergence in a new function This patch moves logic which does the revert and create a commit on top of public changeset because we need to repeat that logic while handling continuation of `hg evolve` when there are conflicts while rebasing the phase-divergent changeset.

evolve: store the precursor of phase-divergent in evolvestate This patch makes `hg evolve` store the precursor of phase-divergent changeset in evolvestate so that we don't need to calculate that again.

evolve: move logic to complete interrupted relocation to new fn This moves logic which completed the interrupted relocation to it's own separate function as we will need that function in continuing phase-divergence and content-divergence too.

evolve: move logic to complete interrupted orphan resolution to new fn This patch moves logic which completes an interrupted orphan resolution to it's own new function. We will defining such functions for completing phase-divergence and content-divergence too.

evolve: write data to evolvestate in case on conflicts in phase-divergence This patch makes phase-divergence resolution write data to evolvestate instead of graftstate. The `evolve --continue` handling of phase-divergence is broken which will be done in upcoming patches.

evolve: explicitly turn revs to list before storing into evolvestate The cbor library which we are using cannot handle encoding and decoding Python sets, and revs was set there. Let's convert revs explicitly to list to make sure we don't try writing sets.

tests: add tests of content+parent change creating phase-divergence This patch adds tests which shows handling of phase divergence cases by `hg evolve` command which involved content+parent change. The conflicts case is not handled and will be fixed in upcoming patches.

tests: show first line of commit message in test-evolve-phase-divergence.t This patch adds 'firstline' filter to description in the log template.

evolve: make sure bookmarks are moved after phase-divergence resolution This patch adds logic to move bookmarks from the rebased node to the phase-divergence resolved node.

evolve: use the new rebased changeset to resolve phase-divergence When there is a parent change in phase-divergence, `hg evolve` first rebases the diveregent changeset on parent of public changeset and then continue the resolution of phase-divergence *but* we used to continue with the old divergent changeset rather than the new rebased one. This patch makes sure we use the new rebased changeset to proceed with the resolution. Tests changes shows that it fixes things which were broken earlier.

evolvecmd: add a detailed comment and some newlines This patch adds a detailed comment on a chunk and some newlines to make things look better and more understandable for upcoming patches.

tests: add one more test case about handling of phase-divergence by evolve This patch adds a test case when phasedivergence is caused by rebase command and there is parent change involved. As the tests show, we are not handling things correctly here. Upcoming patches will fix that. Fixing things in later patches showed there was a wrong case in one another test which will be fixed by later patches, so let's add description on why that test is wrong in this patch.

tests: add more tests for handling of phase divergence by `hg evolve` This patch adds more tests related to handling of phase-divergence by `hg evolve` command.

tests: temporary delete the merge test of handling phase divergence This patch temporary deletes the merge test of handling phase divergence by `hg evolve` command to that other important tests can be plugged in before this. This will make adding more tests easy. As I say, this is temporary to ease out adding more tests, the test will be added back.

tests: various comment on test-evolve-phase-divergence

tests: make test-evolve-phase-divergence more descriptive This patch adds description to what each part is doing in test-evolve-phase-divergence.t and some commands which should be used to analyze the divergence before resolving that.

compat: use updateresult API if available The status return is no longer a tuple, we access attribute instead.

compat: provide an explicit default value to the 'odiff' config There is a devel warning about this now.

compat: keep passing arguments as keyword argument Otherwise, This break with new changes in upstream Mercurial.

compat: search for stringmatcher in the new location More of util has been split into sub modules.

rebase: update the rebase wrapping to works with hg 4.6 Mercurial core commit bd0086bd3af4 removed _makeextrafn hence breaking our wrapping. Update the code to wrap rebaseruntime directly in a way that's compatible with hg 4.1+.

compat: call current obsolete.createmarkers(), not one from load time Other extensions may wrap obsolete.createmarkers(). If they do, we should call their wrapped version. However, since f61a23a84dac (compat: add wrapper for obsolete.createmarkers() that accepts "operation" arg, 2018-03-16), we started storing the version of the function as it was when our compat module was loaded. This broke an extension we use internally at Google.

tests: rename test-evolve-bumped to test-evolve-phase-divergence.t While I was here, I added a heading to test mentioning what the test if for.

evolve: replace bumped in function name to phasedivergence bumped was the old name of phasedivergence. Lets replace with its new name so that we can forget the old one.

evolve: drop duplicate import of rewriteutil._bookmarksupdater

obslog: more 4.1 code compatibility drop

template: drop some 4.1 compatibility code Simplify all the things.

checkheads: drop upstreamed code Mercurial 4.2 has all the code that used to live in the evolve extensions so we can drop it now.

obslog: cleanup patch handling after 4.1 compat drop We can remove some of your compatibility code.

packaging: further mark 4.1 support as dropped

branching: merge with stable

tests: extend the globing to the user name Silly me.

branching: close mercurial-4.1 test branch

evolve: kill `--obsolete` and `--old-obsolete` flags for graft Evolve extension used to add the couple of flags to `hg graft` command for reasons I don't know but they were deprecated. For the functionality of `hg graft --old-obsolete`, we have `hg grab` now which can do that. One more reason to kill this is that we have logic to parse the graftstate, whereas in core, we are going to change how state files are read and write. Tweaked the tests a bit to use `hg grab` instead of these flags to make rest of the test output consistent. Replaced an entry of `hg graft -O` in doc by `hg grab`.

compat: drop support for Mercurial 4.1 This version is over 1 year old and we are dropping support for it.

packaging: mark versiond as devel versions This will help prevent confusion when installing a non-tagged version.

packaging: merge stable back into default Version have been released.

packaging: mark version as devel version This will help prevent confusion when installing non-tagged version.

Added tag 7.3.0 for changeset e4ac2e2c2086

test-compat: merge mercurial-4.2 into mercurial-4.1

test-compat: merge mercurial-4.3 into mercurial-4.2

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge stable into mercurial-4.4

branching: merge future 7.3.0 into stable Release belong to stable

tests: update test output for the stable branch

debian: add version 7.3.0 to changelog

packaging: update version numbers

changelog: prepare release 7.3.0

tests: updated tested with version

__init__: show some internationalization love

evolvecmd: show some internationalization love Some outputs are not internationalized because I doubt that they are gonna stay here for long.

utility: make sure prompt text is internationalized This patch internationlize the prompt text by passing the into mercurial.i18n._

test: do not use revision number This get confused with older version.

compat: use mergetoolopts from commands.py Mercurial <= 4.2 do not have cmdutils.py yet.

branching: merge stable into default Some bugfix that we could use here (also getting ready for a release).

evolve: add a `--stop` flag for `hg evolve` command This patch adds a `--stop` flag for `hg evolve` command. The stop flag lets you stop the evolution from where you are and let you move to other things if you want. This fuctionality is great as user can decide to resolve conflicts later on, stop the command execution, do something else and get back once they has time or care about resolving them. As implementation details, it clears the evolvestate, updates to the parent of working directory clearing the uncommitted changes which also deletes the mergestate. A new test file test-evolve-stop.t is added with tests of the new flag added.

obsexchange: make compatible with some unreleased 4.5 versions We don't generally care to be compatible with unreleased versions of hg, but this is just a one-line change to be compatible with a range of commits before 158d4ecc03c8 (wireprotoserver: move all wire protocol handling logic out of hgweb, 2018-03-08), so hopefull it can be worth it.

compat: make override of createmarkers work on wrapped function If createmarkers() has been wrapped using functools.partial(), the __code__ attribute won't exist. Fix by unwrapping partial functions. I tried to find another attribute to use as proxy for the "__code__.co_argcount < 6", but there were no new functions or similar added in that commit.

previous/next: add -m short form for --merge This matches core's option to `hg update`. This patch also covers `hg next`, but test-check-commit.t only lets me mention one of them.

evolve: handle stabilization of merge changeset with both parents obsoleted This patch adds logic to stabilize an orphan merge changeset having both parents obsoleted. The logic tries to first stabilize the merge changeset on successor of second parent and then stabilize the new changeset formed on the successor of first parent. We are stabilizing on second parent first and then to second parent to preserve the first parent's successor as first parent of the merge changeset. Conflicts can occcur and we can loose processing information, therefore we store a variable in statefile `orphanmerge` which represents whether we are processing a merge changeset with both parents obsoleted. Thanks to Pierre-Yves David for suggesting this way and helping to understand the correctness of this. More rigourous test cases for this will be added in next patch.

state: add __setitem__() for cmdstate class Adding __setitem__() will help us in setting the value of variables stored in state files using `state[key] = value` in our code which is very convenient.

evolve: preserve the order of merge parents in `hg evolve --continue` This patch makes sure we preserves the order of merge parents in case of `hg evolve --continue`.

topics: include "operation" metadata in obsmarkers

grab: include "operation" metadata in obsmarkers

touch: include "operation" metadata in obsmarkers

split: include "operation" metadata in obsmarkers

prune: include "operation" metadata in obsmarkers

metaedit: include "operation" metadata in obsmarkers

fold: include "operation" metadata in obsmarkers

uncommit: include "operation" metadata in obsmarkers

evolve: include "operation" metadata in obsmarkers

amend: include "operation" metadata in obsmarkers This is for the legacy handling support for "hg commit --amend" case. I picked "amend" because it feels more natural than "commit". Besides, and more importantly, that's consistent what core uses.

compat: add wrapper for obsolete.createmarkers() that accepts "operation" arg I want to start passing the operation argument, but hg < 4.3 does not support it, so we need a compat wrapper. For older hg, the operation is simply ignored.

tests: do not glob out fixed dates Perhaps these dates historically have not been fixed, but they seem to be now. I got tired of not being able to use "run-tests.py -i".

evolve: de-duplicate some function calls _cleanup() was called in continueevolve() and evolve() function too. Let's call it at a single place for both the cases. Also call progresscb() outside of conditionals to call it both times.

evolve: move deletion of evolvestate out of continueevolve() function We need to extract some data at evolve() function from evolvestate.

evolve: load evolvestate before passing to continueevolve() This patch moves some code from continueevolve() to evolve() function so that we have a loaded evolvestate present in the evolve() function for post processing.

evolve: move the handling for non-continue part in else conditional This will help us do factor out which operations we want to do for continue, which for non-continue and which operations we want to do for both of them.

evolve: move the logic of continuation handling of `hg evolve` in own fn The function which defines the evolve command is pretty big with all the logic messed up there. It's better to have individual functions for individual uses. The movement of code will help in adding more logic to continue part in clean way. Moreover for implementing `hg continue`, we need all continuation handling in their own functions, so it will help there too.

CHANGELOG: add an entry about next and prev being interactive

prev: show changeset hash in --dry-run instead of rev numbers rev numbers can change, so it's better to show changeset hash.

prev: prompt user to choose parent in case of multiple parents This patch adds functionality to `hg prev` to prompt user to choose one parent to update when multiple parents exist. Surprisingly there were no tests for this case before this patch, I added one with this patch.

next: cleanup logic around return by returning early In the cmdnext function, there are some conditionals which returns early and some which sets a result value to be returned later. Let's return from all the conditionals early. There are if, elif and else involved, so it's sure we will end up in one of the conditional, each conditional will return, so it's guranteed that we are returning the correct value and returning everytime.

next: prompt user to choose child in ambiguity in `hg next --evolve` This patch makes `hg next --evolve` prompt user to choose a child to evolve and update when multiple of them exists. This is improvement over previous behavior where we used to error out saying ambiguous next unstable changeset and told user to manually use `hg evolve -r rev`. While writing this patch, I am personally very happy to have this feature as I have encountered this stage many times and I wanted `next --evolve` to take care of that. It uses the revselectionprompt thing added in earlier patches.

next: move logic to evolve the children to it's own function This patch moves the logic which evolves the children and updates to it in `hg next --evolve` to it's own function as we want to use that again.

next: prompt user to choose a children in case of ambiguity This patch adds functionality to prompt user and ask the children to which next should move to incase of multiple childrens. This is a very nice UI because otherwise user has to lookup changeset hash, and then manually do `hg update` to that. In this case we show hash and description so user can choose which one to update easily. It is using the interactive revision choosing functionality added in a previous patch.