rewind: add a test about rewinding top of stack For now this rewind is creating an orphan. We add the test to check the behavior in that case.

rewind: use rewinded parent when creating multiple changesets Use use the rewinded parent instead of creating orphans based on identical, but obsolete, changesets.

rewind: add a test for rewinding a fold The code already have basic support for case. However the result create orphan that will need to be improved. However, we keep this changeset simple.

rewind: add a test for rewinding a split There are no code change needed but it is worth testing on its own.

rewind: update the working copy if it gets obsoleted If the working copy parent is rewinded, follow the rewind.

rewind: add a message about obsolete changeset Not the best output, but useful to have the data. We can improve that later.

rewind: obsolete latest successors unless instructed otherwise To prevent the creations of divergence, we automatically mark the successors set of the rewinded changeset as obsoleted by the rewind result. A new flag `--as-divergence` is added to disable this behavior.

rewind: test rewinding an amended changesets We are now able to rewind a simple amended changeset. For now, its current successors has not been obsoleted and we created divergence.

rewind: add a message about the rewinded changesets This helps to understand what happened.

rewind: add a proto version of the command This first version focus on rewinding a single revision without care for the consequence.

stablesort: make sure heads are processed in sorted order changeset 72621094505f will fix some ordering issue in the `heads` revset so we stabilise the output in advance.

evolve: move the bookmarks also when updating to successor (issue5923) When we are on an obsolete node and does `hg evolve`, it updates to it's sucessor, however it does not move the bookmark to the successor. This patch adds logic to make sure we move the bookmark too. Test change demonstrates the fix.

tests: add test to demonstrate issue5923 This will be fixed in upcoming patch.

changelog: add an entry about the new `evolve.interrupted` section

evolve: make one missed error to align other error messages Previous patches missed this error to change it to the new format. Let's align this with all other messages raised by `hg evolve` command.

evolve: raise error.InterventionRequired instead of Abort when conflicts error.InterventionRequired is a better error to raise in such cases. Thanks to marmoute for noticing this.

changelog: add a changelog entry about divergence resolution We made a lots of progress there.

evolve: create resolved cset on successors of current parents While resolving content-divergence, sometimes, the parent can be obsolete and have a successor. We should consider the successors of the parents instead of obsolete parents as that will do something like orphan+content-divergence resolution both at the same time which is powerful and results in a single stack while resolving content-divergence of stacks. The test changes demonstrates that we can now successfully evolve a content divergent stack.

tests: fix a test case to not create conflicts This is the test case where we are testing about divergence resolution of stack of patches. If the stack is as follows: C1 C2 | | B1 B2 | | A1 A2 \/ base And A1-A2, B1-B2 and C1-C2 are content-divergent, and merging A1-A2 results in conflicts. Now if you resolve conflicts and continue resoling B1-B2, the conflicts of A1-A2 will still be there. We need somehow to understand the work we has done and not create conflicts again. To test the evolution functionality for now, we make sure conflicts does not occur.

evolve: introduce a resolutionparent variable and store it in evolvestate This patch introduces a resolutionparent variable which will be the parent of final changeset after resolving content-divergent changesets. Till now, the parent is always the parent of one of the divergent node, but now in upcoming cases, it can be a successor of both the parents of divergent nodes.

evolve: introduce a dirstatedance() fn to fix dirstate after parent change This patch introduces a dirstatedance() function which will be used after fixing the dirstate when we change parents using repo.dirstate.setparents(). Look at docs added for more details.

evolve: create a new commit instead of amending one of the divergents This patch changes the behavior of evolve command while resolving content-divergence to create a new commit instead of amending one of the divergent ones. In past, I have made this change, backed out this change and now today again I am doing this change, so let's dive in some history. Using cmdrewrite.amend() was never a good option as that requires hack to delete the evolvestate and also gives us less control over things. We can't make the commit on top of different parents as that of content-divergent ones. Due to all these, I first made this change to create a new commit instead of amending one. But, after few days, there was flakiness observed in the tests and turned out that we need to do some dirstate dance as repo.dirstate.setparents() does not always fix the dirstate. That flakiness was a blocker for progress at that time and we decided to switch to amend back so that we can have things working with some hacks and we can later fix the implementation part. Now, yesterday while tackling resolving content-divergence of a stack which is as follows: C1 C2 | | B1 B2 | | A1 A2 \/ base where, A1-A2, B1-B2, C1-C2 are content-divergent with each other. Now we can resolve A1-A2 very well because they have the same parent and let's say that resolution leads to A3. Now, we want to resolve B1-B2 and make the new resolution commit on top of A3 so that we can end up something like: C3 | B3 | A3 | base however, amending one of the divergent changesets, it's not possible to create a commit on a different parent like A3 here without some relocation. We should prevent relocation as that may leads to some conflicts and should change the parent before committing. So, looking ahead, we can't move with using amend as still using that we will need some relocation hacks making code ugly and prone to bad behaviors, bugs. Let's change back to creating a new commit so that we can move forward in a good way. About repo.dirstate.setparents() not setting the dirstate, I have researched yesterday night about how we can do that and found out that we can use cmdrewrite._uncommitdirstate() here. Expect upcoming patches to improve the documentation of that function. There are lot of test changes because of change in hash but there is no behavior change. The only behavior change is in test-evolve-abort-contentdiv.t which is nice because creating a new commit helps us in stripping that while aborting. We have a lot of testing of content-divergence and no behavior change gives enough confidence for making this change. I reviewed the patch carefully to make sure there is no behavior change and I suggest reviewer to do the same.

evolve: always order the revs to be evolved The current code only order the revs if we are resolving orphans and not in other case. The ordering is important when we pass --all and tackle multiple occurence of the same instability. Let's order the revs for each instability. There are enough test coverage of phase-divergence and content-divergence that I feel confident doing it because none of the test changed. The change in test-evolve-content-divergent.t demonstrates the indeed ordering helped.

tests: add test of resolution of content-divergent stacks This patch adds a test of resolution of content-divergence stacks where a series of changesets get mutated as two different series resulting in whole content-divergent stacks. As the tests shows, we are not processing the changesets in right order which needs to be fixed first.

evolve: improve error messages when conflicts occur This patch improves the error messages when conflicts occur. First, we drop the line 'evolution failed', that is not the best line we can show and evolution didn't failed, it's just interrupted by the conflicts and when user will run `hg evolve --continue`, things will be fine. I still remember when I first saw 'evolution failed', I got a bit scare as am I in a recoverable position or not. So let's drop this scary line. Second, we replace the error messages to say `resolve conflicts and see help-topic`. The help topic was added recently and documents all the three flags very well. Addition of tests also showed that all the three flags works fine with all the three instability type. So we should advertise them more. Third, we now raise the error with our error message rather than raising MergeFailure and having evolution related text in hint or stderr above. This increase the focus on the error message we want to show. After this patch, I think error messages by evolve in case of conflicts will be same in every case.

evolve: point to `hg help evolve.interrupted` while resolving content-div Recent test additions shows that --abort and --stop works well while resolving content-divergence and we should advertise them. This patch does so by pointing to evolve.interrupted help topic.

tests: add test about aborting content-divergence when multiple parents This patch adds tests for --abort flag of hg evolve command when we are resolving content-divergence which are on different parents and parent of one of them is the gca of both of them. The tests shows that we are doing good and we should advertise the flag during conflicts.

CHANGELOG: add an entry about the --update flag Since --update is still the default, we make the entry about --no-update.

evolve: show unfinished information in `hg status -v` (issue5886) `hg status -v` shows information about unfinished states or `hg status` shows it when `commands.status.verbose=True` is set. Before this patch, information about interrupted evolve does not show up because evolve does not resgiters in cmdutil.STATES. This patch make sure we register evolve related information there. There has been an idea to unify cmdutil.unfinishedstates and cmdutil.STATES which needs some work and the resulting state does looks a bit complicated. So till the time we unify them, let's fix this bug by registering in cmdutil.STATES.

style: drop a (commented) debug print Left-over from 4dcf87849f9d.

tests: update tests output with changes in d0abd7949ea3 in core hg CORE-TEST-OUTPUT-UPDATE: d0abd7949ea3 CORE-TEST-OUTPUT-UPDATE: 1e9c357d3ddf

branching: merge with stable Merging with the new 8.0.1 release.

Added tag 8.0.1 for changeset 0887c30255a1

packaging: prepare for 8.0.1 release

changelog: add a couple of missing entry

evolve: strip the extra obsmarkers if any on `hg evolve --abort` Previous patches started storing some obsmarkers which needs to stripped during `evolve --abort` which can't be stripped by stripping the new evolved changesets because they point to a node which existed before the evolution was performed. This patch adds logic to strip those obsmarkers by finding their indices in the obsstore and then stripping them.

evolve: store the obsmarkers to be deleted in evolvestate Sometimes, we don't create a new node and obsolete one of the old node in favour of an existing node. When user calls, `hg evolve --abort`, we need to strip that obsmarker to go back in the same old state. The obsmarker created for new node are stripped when the new nodes are stripped. This patch start storing such obsmarkers in the evolvestate so that we can delete them later if required. Right now we just store successsor and predecessor information, we might need a better obsmarker serialization techinque in future to make it more robust.

evolve: store obsmarkers to be deleted in evolvestate There are operations which don't create a new node rather they just obsolete one of the unstable node in favour of existing one. In such cases if a further resolution leads to conflicts and user calls `evolve --abort` or `evolve --stop`, we might need to delete that obsmarker. So let's store such obsmarkers in the evolvestate.

evolve: factor out logic to merge branches in separate function This patch moves the logic to merge branches while resolving content-divergence to a separate function. This makes code clear and better to understand.

tests: add more test of --stop while resolving content-divergence This tests the --stop flag when conflicts occur while relocating one of the divergent changesets.

evolve: strip the relocation commit on `hg evolve --stop` While resolving content-divergence on multiple parents, we relocate one of the commit on the parent of another one and then merge the divergent changesets. Merging can leads to conflicts, and if user does `hg evolve --stop`, we need to strip that relocated changeset too! This patch does that. Test changes demonstrates the fix.

evolve: declare updated and pctx variables in stopevolve() They will used in next patch.

evolve: store the old other divergent node after relocation in evolvestate When the content-divergent changes are on different parents and we relocate of the node to the parent of another one, we get a new other-divergent node. We still need to store the older other-divergent in evolvestate so that we can use that information.

evolve: factor out logic for --stop flag in separate function This will make code clean

tests: add test for --stop flag when resolving multiparents content-div This patch adds a test for --stop flag when we are in an interrupted content-divergent resolution which have multiple parents. Conflicts happen we merge the divergent changesets after relocation. The test shows that we need to strip the relocated changeset.

evolve: move logic to continue interrupted content-div resolution to new fn Each of the other type has defined their own function to continue/complete the interrupted resolution. We take out the logic for content-div resolution too in a separate function to make the top level function looks clean.

evolve: rename help topic evolve.interrupted-evolve to evolve.interrupted `evolve.interrupted-evolve` has the word evolve twice. Now that this help topic is a part of evolve command, evolve.interrupted will mean the interrupted evolve command only.

packaging: update tested-with statements in evolve and topic

CHANGELOG: mention about 4.6.1 compatibility

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge stable into mercurial-4.5

utility: use ui.interactive() instead of checking config value Before this patch, the rev selection prompt which pops up in case of ambiguity to ask user to select a rev used to check the config value of ui.interactive which can is by default set to None. We should use ui.interactive() instead which is more smart in such cases. Thanks to martinvonz for suggesting this.

CHANGELOG: add couple of entries about things fixed We are preparing for a release!

next-prev: always respect the --merge flag An earlier bug fix series which started respecting commands.update.check introduced a bug in which --merge was not respected sometimes. This patch fixes that behavior by passing updatecheck as 'none' to hg.updatetotally() if --merge is passed which is similar to what `hg update` does.

next-prev: add tests showing --merge not respected in some cases This patch adds tests which show that --merge is not respected when you set commands.update.check to any value. This is a bug I wrote few days ago and will fix it in next changeset. I like this process of writing bugs and fixing them.

evolve: store the evolvestate if relocation results in conflicts We missed storing the evolvestate on disk when relocation lead to conflicts. We need to store it to grab information to continue or abort or stop the evolve.

tests: add more test of resolution of content-divergent changesets This patch adds test of resolution of content-divergent changesets when relocation is required and it leads to conflicts. The test shows that we are not doing the right thing. This will be fixed in upcoming patches.

evolvestate: store info about relocation while resolving content-divergence While resolving content-divergence when they are on different parents, we relocate one of the node to parent of another one and this can lead to conflicts sometimes. So we need to store information about that state in evolvestate so that we can use that when user does `hg evolve --continue` or `--stop` or `--abort`. Now that we make sure, we store the new other node in evolvestate, we fix the behavior of handling the relocated commit and merge the right changesets.

evolve: factor out logic to merge content divergent csets in separate fn This will help us in reusing the logic if we need to while doing evolve --continue.