changelog: add a couple of missing entry

evolve: strip the extra obsmarkers if any on `hg evolve --abort` Previous patches started storing some obsmarkers which needs to stripped during `evolve --abort` which can't be stripped by stripping the new evolved changesets because they point to a node which existed before the evolution was performed. This patch adds logic to strip those obsmarkers by finding their indices in the obsstore and then stripping them.

evolve: store the obsmarkers to be deleted in evolvestate Sometimes, we don't create a new node and obsolete one of the old node in favour of an existing node. When user calls, `hg evolve --abort`, we need to strip that obsmarker to go back in the same old state. The obsmarker created for new node are stripped when the new nodes are stripped. This patch start storing such obsmarkers in the evolvestate so that we can delete them later if required. Right now we just store successsor and predecessor information, we might need a better obsmarker serialization techinque in future to make it more robust.

evolve: store obsmarkers to be deleted in evolvestate There are operations which don't create a new node rather they just obsolete one of the unstable node in favour of existing one. In such cases if a further resolution leads to conflicts and user calls `evolve --abort` or `evolve --stop`, we might need to delete that obsmarker. So let's store such obsmarkers in the evolvestate.

evolve: factor out logic to merge branches in separate function This patch moves the logic to merge branches while resolving content-divergence to a separate function. This makes code clear and better to understand.

tests: add more test of --stop while resolving content-divergence This tests the --stop flag when conflicts occur while relocating one of the divergent changesets.

evolve: strip the relocation commit on `hg evolve --stop` While resolving content-divergence on multiple parents, we relocate one of the commit on the parent of another one and then merge the divergent changesets. Merging can leads to conflicts, and if user does `hg evolve --stop`, we need to strip that relocated changeset too! This patch does that. Test changes demonstrates the fix.

evolve: declare updated and pctx variables in stopevolve() They will used in next patch.

evolve: store the old other divergent node after relocation in evolvestate When the content-divergent changes are on different parents and we relocate of the node to the parent of another one, we get a new other-divergent node. We still need to store the older other-divergent in evolvestate so that we can use that information.

evolve: factor out logic for --stop flag in separate function This will make code clean

tests: add test for --stop flag when resolving multiparents content-div This patch adds a test for --stop flag when we are in an interrupted content-divergent resolution which have multiple parents. Conflicts happen we merge the divergent changesets after relocation. The test shows that we need to strip the relocated changeset.

evolve: move logic to continue interrupted content-div resolution to new fn Each of the other type has defined their own function to continue/complete the interrupted resolution. We take out the logic for content-div resolution too in a separate function to make the top level function looks clean.

evolve: rename help topic evolve.interrupted-evolve to evolve.interrupted `evolve.interrupted-evolve` has the word evolve twice. Now that this help topic is a part of evolve command, evolve.interrupted will mean the interrupted evolve command only.

packaging: update tested-with statements in evolve and topic

CHANGELOG: mention about 4.6.1 compatibility

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge stable into mercurial-4.5

utility: use ui.interactive() instead of checking config value Before this patch, the rev selection prompt which pops up in case of ambiguity to ask user to select a rev used to check the config value of ui.interactive which can is by default set to None. We should use ui.interactive() instead which is more smart in such cases. Thanks to martinvonz for suggesting this.

CHANGELOG: add couple of entries about things fixed We are preparing for a release!

next-prev: always respect the --merge flag An earlier bug fix series which started respecting commands.update.check introduced a bug in which --merge was not respected sometimes. This patch fixes that behavior by passing updatecheck as 'none' to hg.updatetotally() if --merge is passed which is similar to what `hg update` does.

next-prev: add tests showing --merge not respected in some cases This patch adds tests which show that --merge is not respected when you set commands.update.check to any value. This is a bug I wrote few days ago and will fix it in next changeset. I like this process of writing bugs and fixing them.

evolve: store the evolvestate if relocation results in conflicts We missed storing the evolvestate on disk when relocation lead to conflicts. We need to store it to grab information to continue or abort or stop the evolve.

tests: add more test of resolution of content-divergent changesets This patch adds test of resolution of content-divergent changesets when relocation is required and it leads to conflicts. The test shows that we are not doing the right thing. This will be fixed in upcoming patches.

evolvestate: store info about relocation while resolving content-divergence While resolving content-divergence when they are on different parents, we relocate one of the node to parent of another one and this can lead to conflicts sometimes. So we need to store information about that state in evolvestate so that we can use that when user does `hg evolve --continue` or `--stop` or `--abort`. Now that we make sure, we store the new other node in evolvestate, we fix the behavior of handling the relocated commit and merge the right changesets.

evolve: factor out logic to merge content divergent csets in separate fn This will help us in reusing the logic if we need to while doing evolve --continue.

evolve: commit the transaction if conflicts occur while merging content-div Yes, let's commit the transaction in case conflicts occur. Yes, this is what unshelve does and this is one of the reasons we don't like unshelve. Previous patches added support for resolving content-divergence when they are on different parents with parent of one being the gca. In such cases, we relocate one of the divergent commit to the parent of another one. All the relocation stuff and merging divergent changeset stuff happens in a single transaction, so if there are conflicts while merging, we abort and the transaction rollsback and our relocated commit is not applied after abort. We don't want to process the relocation because that can lead to conflicts and we will have dirty wdir because of resolving conflicts. So, we commit the transaction when merging results in conflicts to make sure if relocation happened, we commit that. This fixes the absence of relocation commit found in previous patch and uncover a new bug about handling of relocated commit. Upcoming patch will fix it.

tests: add tests for resolving content-divergence when different parents This patch adds more tests for cases when we try to resolve content-divergence when they are on different parents. The last test shows the we are somehow missing the relocated commit in interrupted transaction. This will be fixed in next patch.

evolve: implement resolution of content-divergence when on differet parents This patch implements the basic version of resolution of content-divergence changesets when they are on different parents but one of the parent is gca of both the different parents. The functionality first relocates the divergent changeset which was left behind and then resolves the content-divergence like it resolves in normal cases. This is a very basic implementation because it still does not work on interrupted evolution. Test changes in this patch shows the basic functionality working. The output of dry-run is also required to be tweaked in such cased. Upcoming patches will add more tests and will improve the implementation to work during conflicts too.

tests: add tests for resolving content-divergence with parent change This patch adds a new test file test-evolve-content-divergence.t which tests the resolution of content divergence when the divergent changesets does not have the same parents.

CHANGELOG: add an entry about fixing issue5877

evolve: pop up editor if conflicts occur while merging commit messages Last patch added support for merging commit messages while resolving content divergence. In case of conflicts we fallback to one of the divergent commit messages. After this patch, we will pop up an editor where user has to resolve the conflicts in the commit messages and then continue. Tests are added for this. We need to fix handling in test-sharing.t to use HGEDITOR to fix conflicts and pass the new commit message. Future improvement can be that we should respect HGMERGE while merging commit descriptions too.

evolve: merge commit messages while resolving content-divergence (issue5877) While resolving content-divergence, there can be divergence in commit messages too which should be resolved. This patch uses the hg's internal merge API's to merge commit messages of divergent changesets with predecessor as the base. In case of conflicts, we fallback to divergent's commit message which should be changed in future. We should pop up the editor with the commit message and the conflict markers and let user fix that. Tests are added for the functionality added.

evolve: move if-else block under the right block the index related if-else should be only executed when all three base, divergent and other have different branch names. I coded this last night and mistakenly mis-indented it. Caught when I was adding more tests.

tests: make sure we don't result in commit messages conflict Upcoming patches will introduce functionality of merging commit messages while resolving content divergence which can lead to conflicts. We don't want to test the conflicts scenario here, so let's make sure there are no conflicts of commit messages in this test.

tests: don't use mkcommit shell function in test-divergent.t Upcoming series will start merging commit descriptions while resolving content-divergence. This tests are here to test the basics of content-divegrence resolution and we should not be testing much of commit description merge here. Replacing mkcommit function with normal hg calls will help us decide on the commit messages ourselves and prevent conflicts while merging commit messages.

evolve: remove duplicated documentation File saving failure…

evolve: show `hg help evolve.interrupted-evolve` in error when conflicts The help list various flags which you can use during interrupted evolve resolution and description about what they do. This will be very helpful for user on how to continue an interrupted evolve.

evolve: add a help topic `Interrupted-Evolve` This help topic contains description on how the various flags work during interrupted evolve. This help topic will be included in error message during interrupted evolve in next patch.

branching: merge with stable

changelog: fix version number error

evolve: return the new node formed only as the replacement sometimes, the the other content divergent changeset is obsoleted in favour of the local divergent changeset in which case we should not store that as a replacement because `hg evolve --abort` will strip that changeset. Let's make sure we return the newnode only if formed. The test results shows that we are still not 100% accurate as we need to strip an obsmarker.

tests: add more test of --abort flag for content-divergence resolution This patch adds test when we resolve multiple content-divergence changesets at once and resolution fo first content-divergence does not form new commits, resolution of second one leads to conflicts. As the output shows, we are wrongly stripping a changeset here, which should be fixed in next patch.

evolve: prompt user for branch selection while resolving content-divergence When resolving content-divergence, there can be case when both the content-divergent changesets are on different named branches. In that case, we are not sure which branch should the resolution commit should be on. This patch adds logic to prompt user to choose the branch which the resolution commit should be on and then creates the new resolution commit on that branch. This also adds a new test file which have tests for the branch selection feature we have added.

evolve: pass the base revision in _completecontentdivergent() We need the base revision to merge commit messages, branches and more stuff. Let's make sure we have that by passing into the function which completes the divergence resolution.

evolve: store the base of content-divergents in evolvestate We need the base changeset for merging commit messages, branches. Let's store it in evolvestate.

evolve: use cmdrewrite.amend() instead of creating a new commit This patch backs out changeset 88601e1cd5d8. We replaced cmdrewrite.amend() with creating new commit because using amend(), a high level function was not good and creating a new commit gave us more control over things. **HOWEVER** to get more control, you need to get arrange all the pieces together perfectly. Creating a new commit, the existing logic has some bugs around dirstate handling, the `repo.dirstate.setparents()` call especially. Sometimes this fixes the dirstate correctly sometimes not. As Pierre-Yves David said, "Having a "clumsy" implementation with the right behavior is usually a good first step. So having an amend based implementation seems like a good first step.", let's take a step back and get back using amend so that we can have a correct basic implementation which is bug free.

corecompat: update the tests output to show phase update summary eb9835014d20 in core added support to transactions to show a summary on the phase changed during that transaction. Due to this, couple of tests output needs to be updated. This patch does that. While realeasing evolve, this patch should be backed out on branches where hg<=4.6. CORE-TEST-OUTPUT-UPDATE: eb9835014d20

CHANGELOG: add an entry about issue 5808 being fixed

next-prev: replace the error hint to mention about `--merge` flag

tests: add tests for conflicts while respecting commands.update.check This patch adds tests to check that we don't run into conflicts while respecting commands.update.check. The error message now does not show the hint about --merge option which we should fix.

next: respect `commands.update.check` config option in `hg next` (issue5808) `commands.update.check` config option determines what level of checking should be done when we update to another revision. When we set this config option to `noconflict`, it updates your working directory to a specified revision only when there will be no conflicts which is a very nice behavior. This patch adds logic to respect the config option so that we can have that nice behavior with `hg next` too. It turns out, we just needed to use hg.updatetotally() and add some cases to check config option. Right now, we only respect the config if value is set to `noconflict`. Otherwise we fallback to the default behavior. This is a part of fixing issue5808. Test changes demonstrate the fix.

prev: respect `commands.update.check` config option in `hg prev` (issue5808) `commands.update.check` config option determines what level of checking should be done when we update to another revision. When we set this config option to `noconflict`, it updates your working directory to a specified revision only when there will be no conflicts which is a very nice behavior. This patch adds logic to respect the config option so that we can have that nice behavior with `hg prev` too. It turns out, we just needed to use hg.updatetotally() and add some cases to check config option. Right now, we only respect the config if value is set to `noconflict`. Otherwise we fallback to the default behavior. This is a part of fixing issue5808. Test changes demonstrate the fix.

tests: add test demonstrating issue5808 This patch adds test showing that `next` and `prev` does not respect the `commands.update.check` config option, particularly when set to `noconflict`.

next: bail out early in `hg next --evolve` if dirty wdir This patch adds logic to bail out early when --evolve is passed with next command and the working directory is dirty. This will help us in preventing the message saying `do you want --merge` which is useless and misleading when `--evolve` is passed.

tests: add test of `hg next --evolve` with dirty working directory I was testing some output change to `hg next --evolve` in dirty working directory and found that we don't have any test for that.