Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:46:20 +0530] rev 3757
evolve: make `--abort` strip the temporary revs created during resolution
During divergence resolution, `hg evolve` created temporary relocation commits
which needs to be stripped off during `hg evolve --abort` to get back to the
same state where we were. Previous patch added a new list temprevs to be stored
in evolvestate.
This patch starts storing the temp relocated node created during
phase-divergence resolution in evolvestate and make sure we consider stripping
it too while `hg evolve --abort`.
The test changes demonstrate the fix. Now we are sucessfully aborting a
phase-divergence resolution.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:43:23 +0530] rev 3756
evolve: store a list of temprevs in evolvestate
There are temporary revisions which are created as a part of divergence
resolution which needs to be stripped off if user runs `hg evolve --abort`. We
need to save the nodeids of those temporary revisions in the evolvestate.
The temprevs list will help in the above mentioned use cases.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:36:14 +0530] rev 3755
evolve: check for None before adding in set of revisions to strip
After previous patch, replacements can contain None. Let's make sure we don't
add None to the revisions to strip during `hg evolve --abort`
The test changes demonstrate the usefulness of this and the previous patch. Now
abort is working and public changesets are not a problem.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:33:14 +0530] rev 3754
evolve: return the new replacement node to be stored in evolvestate
While resolving phase-divergence, we can end up obsoleting the phase-divergent
commit in favor of the public commit. Before this patch we return the node of
public commit to store as a replacement of the phase-divergent commit.
The above will not cause any problem till the time we use `hg evolve --abort` on
an interrupted evolve which tries to strip the replacement nodes because it
thinks that the replacements nodes are the ones which are created during the
resolution and are new.
Since we will be stripping a public node, `evolve --abort` will error out saying
cannot strip public changeset, unable to abort evolve which is bad.
We should make sure, replacements should only consist of new nodes formed. If
the instablity is resolved by obsoleting in favour of old changeset, we should
not store the old changeset in replacements in evolvestate.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:39:38 +0530] rev 3753
evolve: don't make values of replacements dict lists
There was inconsistency in code base related to the values stored in
replacements dict in evolvestate. At some places we store a list, at some places
we just store the nodeid. Let's make sure we store only the nodeid, not a list.
If there are cases, when there are multiple replacements or changesets created
during resolution, later patch will introduce storing temprevs in evolvestate
which should be used.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:41:08 +0530] rev 3752
tests: add a test file `--abort` flag while resolving phase-divergence
This patch adds a new test file test-evolve-abort-phasediv.t which will contain
tests for `hg evolve --abort` flag while resolving phase-divergence.
There is a case in this test which does not work right which will be fixed in
upcoming patches.
Martin von Zweigbergk <martinvonz@google.com> [Tue, 15 May 2018 22:17:27 -0700] rev 3751
evolve: pass revisions as strings to commands.*()
It's usually fine to pass integer revisions to e.g. commands.update(),
but when directaccess is enabled, it attempts to parse it a revset,
which fails.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 01:27:13 +0530] rev 3750
tests: rename test-evolve-abort.t to test-evolve-abort-orphan.t
We renamed the test file because it contains all the cases related to orphan
resolution. Now we care about divergence resolution too and hence we must have
separate specific test files for each type.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 21 May 2018 16:56:52 +0200] rev 3749
branching: merge with branch for stable
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 16:25:29 +0200] rev 3748
compat: update obshashrange test output
Mercurial core bfe8ef6e370e seems to have changed the order of some messages.
Simply accept the change in the test file.
CORE-TEST-OUTPUT-UPDATE: bfe8ef6e370e
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 14:56:51 +0200] rev 3747
test: update to new outputs
Mercurial core ea63a2004d09 update the hidden changeset warning during update
after the effective update.
CORE-TEST-OUTPUT-UPDATE: ea63a2004d09
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 13:07:49 +0200] rev 3746
compat: fix obslog with Mercurial 4.6+
Mercurial core 3fe1c9263024 removed the diffopts attribute on
changesetprinter. Backport consuming diffopts in the constructor for old
versions of changesetprinter and update the non-graph code to extract the
patch option and pass it directly.
Faheem Mitha <faheem@faheem.info> [Sat, 19 May 2018 18:26:36 +0530] rev 3745
debian: add line to clean-docs target to delete additional docs file
Martin von Zweigbergk <martinvonz@google.com> [Mon, 14 May 2018 15:25:38 -0700] rev 3744
amend: use context manager for locks (issue5887)
Martin von Zweigbergk <martinvonz@google.com> [Thu, 10 May 2018 21:37:28 -0700] rev 3743
evolve: point to '--abort' in verbose status message
f6979d64b9fb (evolve: point to '--abort' in error message, 2018-04-22)
changed "hg update -C ." to "hg evolve --abort" in error
messages. This commit makes the same change in the verbose status
message (the one that warns about unfinished evolve).
There's still one mention "hg update -C" in our codebase. That's after
"hg evolve --content-divergent" fails, but I don't think "hg evolve
--abort" works in that case (yet?).
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 22 Apr 2018 20:14:42 +0530] rev 3742
evolvecmd: add comments and new lines in content-divergence handling logic
I have visited this logic three times in last 10 days and I have to re-read the
whole code to make sure I don't miss any part. Adding comments will help
understanding the code in better and fast way.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:18:54 +0530] rev 3741
evolve: show cset hash in "merging conetnt-divergent changeset"
While I was here I also mae de it repo.ui.status() instead of repo.ui.note() to
align the behavior with rest of the messages.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:14:41 +0530] rev 3740
evolve: show cset hash in "update to local conflict" message
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:11:29 +0530] rev 3739
evolve: use hg.updaterepo() instead of hg.update() to hide stats
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:04:18 +0530] rev 3738
evolve: fix the conflicts error message during content-divergence resolution
Before last patch, we didn't had an automated way to continue an interrupted
content-divergence resolution and we used to show a very long error message on
how to continue manually.
This patch replaces that long error message with nice small message which tells
how to continue and how to abort. We still show `hg update -C .` to abort as we
need to test and make `--abort` work in case of content-divergence.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:51:56 +0530] rev 3737
evolve: add logic to continue interrupted content-divergence resolution
We continue the interrupted content-divergence using the logic to complete
content-divergence which we refactored in it's own function few patches ago.
We had to delete evolvestate file before using cmdutil.amend() because otherwise
we can't use the function. This leads to a hack which deletes the evolvestate
file, we may want to not to use the high level API function here. Also we had to
pass evolvestate also to _completecontentdivergent function because of this.
This patch also, adds a test which demonstrates that the logic works fine.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:48:36 +0530] rev 3736
evolve: store the evolvestate file when encountering conflicts
This patch makes `hg evolve` store the evolvestate file when it encounters merge
conflicts while resolving content-divergence.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:13:29 +0530] rev 3735
evolve: take out logic to complete phase-divergence in separate fn
This patch takes out the logic to complete the content-divergence resolution to
it's own separate function so that we can reuse it in case of interrupted
resolution.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 17:54:01 +0530] rev 3734
evolve: store divergent nodes in evolvestate when resolving content-divergence
We need to store the divergent nodes in evolvestate so that we can continue an
interrupted phase divergence resolution.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 02 May 2018 11:59:06 +0200] rev 3733
branching: merge stable into default
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 28 Apr 2018 18:44:07 +0530] rev 3732
tests: add test showing `hg evolve --stop` works fine with phase-divergence
This patch adds a new test file which contains test demonstrating that `--stop`
flag works well while resolving phase-divergence using `hg evolve`.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 28 Apr 2018 18:03:32 +0530] rev 3731
tests: rename the test file to add 'orphan' in the name
test-evolve-stop.t contains test for `hg evolve --stop` for orphan resolution
only. We also need to test the flag while resolving divergence. It will be good
if we have a test file for each type of instability.
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:28:34 +0800] rev 3730
tests: test that `hg obslog wdir()` aborts with a useful message
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:19:45 +0800] rev 3729
obshistory: make obslog work when a commit doesn't have any description
This logic is taken from logcmdutil.changesetprinter class. It checks that
commit description is not empty before extracting the first line (before this
patch it would try to index an empty list).
Stripping description also makes obslog behave more like regular log when there
are trailing/leading whitespaces.
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:14:10 +0800] rev 3728
obshistory: use a more appropriate type for obslog entries
cand is actually a regular changeset and not 'M' (graphmod.MISSINGPARENT). And
'M' is only used for graph edges, but cand is drawn as a graph node.
Visually there's no effect, but the code makes more sense this way.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:19:13 +0100] rev 3727
packaging: mark as development version
This help avoiding confusion when installing from source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:18:19 +0100] rev 3726
branching: merge with latest release
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:16:35 +0100] rev 3725
packaking: mark as development version
This avoid confusion when installing from source.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:36 +0100] rev 3724
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:35 +0100] rev 3723
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:34 +0100] rev 3722
test-compat: merge stable into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:09:14 +0100] rev 3721
Added tag 8.0.0 for changeset 116cdd8c102a
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 14:02:43 +0100] rev 3720
packaging: update version number
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 13:55:52 +0100] rev 3719
packagin: update `tested-with` statement
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 13:49:00 +0100] rev 3718
changelog: mention 4.6 compatibility
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 11:55:49 +0100] rev 3717
Changelog: pre-version gardening
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 25 Apr 2018 01:58:45 +0100] rev 3716
testcompat: update output for Mercurial 4.3
Lets of minor update + one major update to tests/test-evolve-phase-divergence.t
since all hashed chance (different instability name).
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:23:00 +0200] rev 3715
test-compat: merge mercurial-4.4 into mercurial-4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:11:10 +0200] rev 3714
test-compat: merge mercurial-4.5 into mercurial-4.4
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 08:57:18 +0100] rev 3713
testcompat: revert output change from new capabilities
This new capabilities is 4.6 only.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 08:42:47 +0100] rev 3712
testcompat: revert output change from 54a469cd5b26
These are 4.6 only changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 08:41:57 +0100] rev 3711
testcompat: revert output change from 1de6ba0ac6d7
These are 4.6 only changes.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:10:26 +0200] rev 3710
testcompat: merge stable into mercurial-4.5
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 15:23:15 +0100] rev 3709
compat: handle different `ui.edit` signature with Mercurial 4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 16:13:42 +0100] rev 3708
wirepeer: try modern module first
This avoid some issue with remaining .pyc
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 24 Apr 2018 12:07:35 +0100] rev 3707
compat: handle lack of allpredecessors for Mercurial 4.3
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 12:03:05 +0100] rev 3706
branching: merge further fix into stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 11:44:05 +0100] rev 3705
wrapping: fix a silly error were we checking on module and wrapping the other
...
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 23 Apr 2018 11:04:27 +0200] rev 3704
brancing: merge next release into default
We are about to release hg-evolve 8.0.0
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 21 Apr 2018 11:01:12 +0200] rev 3703
test-compat: open mercurial-4.5 branch
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 22 Apr 2018 11:40:17 +0200] rev 3702
evolve: point to '--abort' in error message
The way to escape and evolve run has been updated and we need to tell our user
about it.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:27:13 +0200] rev 3701
compat: drop compatibility layer for pager
All versions we support now support `ui.pager`.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:25:17 +0200] rev 3700
compat: drop compatibility layer for duplicatecopies
We no longer support version before Mercurial 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:21:44 +0200] rev 3699
compat: drop compatibility layer for bookmark.applychanges
We now only support Mercurial version down to 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:15:10 +0200] rev 3698
compat: from compatibility layer for allprecursors
We only support down to 4.3 now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:12:37 +0200] rev 3697
compat: drop compatibility layer for successorssets
We support down to Mercurial 4.3 now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:08:01 +0200] rev 3696
compat: drop compatibility wrapper for "relevantmarkers"
We no longer support version without the logic we have been adding.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:51:53 +0200] rev 3695
compat: drop compat layer for cleanupnodes
We no longer support version lower than 4.3.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:07:23 +0200] rev 3694
compat: from compatibility layer for createmarkers
We support down to 4.3 now. It supports operation.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 16:01:49 +0200] rev 3693
compat: drop obsutile layer
Mercurial 4.2 is no longer supported.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 15:59:39 +0200] rev 3692
compat: drop vfsmod compat layer
Mercurial 4.2 is no longer supported.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:26:03 +0200] rev 3691
evolve: use in code filtered error for 4.6
Things have been upstream into core for a while, let us use them instead of the
evolve version.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 15:51:44 +0200] rev 3690
documentation: refer to 4.3 in the help text
Minimal version supported is now 4.3. Drop reference to 4.2 in the help.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:14:34 +0200] rev 3689
topic: remove compatibility for older version in discovery wrapping
Support for 4.1 and 4.2 has been dropped.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:01:24 +0200] rev 3688
obscache: drop compat layer to access public changeset
We can now access precomputed sets. (compat to 4.1 and 4.2 dropped)
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 14:00:12 +0200] rev 3687
obscache: drop compat layer for obsmarkers reading
We cna now use a version with the argument we needs.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 13:40:57 +0200] rev 3686
template: drop compatibility layer
Support has been dropped for 4.1 and 4.2
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 13:35:31 +0200] rev 3685
timer: drop compat layer for time
Support for 4.1 and 4.2 has been dropped.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 11:38:13 +0200] rev 3684
compat: drop support for Mercurial 4.2
Since Mercurial 4.6 is about to be released, we drop support for 4.2 too.
(code still need to be cleaned up).
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 11:39:04 +0200] rev 3683
compat: close test-compat branch for mercurial-4.2
Support for this version have just been dropped.
Martin von Zweigbergk <martinvonz@google.com> [Wed, 18 Apr 2018 22:54:11 -0700] rev 3682
evolve: add support for hg >= b4d85bc1
Mercurial commit b4d85bc1 deleted the wireproto module and its
contents are now in various other modules, so we can not even do
unchecked imports of it now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:59:12 +0200] rev 3681
discovery: handle deletion of 'wireproto' module
Mercurial commit b4d85bc122bd. deleted the wireproto module and its
contents are now in various other modules, so we can not even do
unchecked imports of it now.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:55:57 +0200] rev 3680
evolve: handle wireproto module deletion for registering new commands
Module have been deleted in b4d85bc122bd. We can no longer import it blindly.
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:53:59 +0200] rev 3679
minitopic: handle wireproto module change from b4d85bc122bd
This module have been scattered in other place, so we need to detect and handle
this for 4.6+
Pierre-Yves David <pierre-yves.david@octobus.net> [Thu, 19 Apr 2018 10:50:24 +0200] rev 3678
topic: handle wireproto module change from b4d85bc122bd
This module have been scattered in other place, so we need to detect and handle
this for 4.6+
Martin von Zweigbergk <martinvonz@google.com> [Wed, 18 Apr 2018 22:36:54 -0700] rev 3677
obsexchange: remove unused import of wireprotoserver
This seems to be unused since 300d7d019b9.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 18 Apr 2018 10:08:05 +0200] rev 3676
compat: rename resolvepartialhexnodeid to resolvehexnodeidprefix
The name changed in 5f8f013e7d52
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 19:42:46 +0200] rev 3675
compat: access datestr in a way compatible with verison prior to 4.6
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 19:42:26 +0200] rev 3674
compat: fallback to compatible partial lookup prior to 4.6
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 18:30:56 +0200] rev 3673
import: adapt to fd1dd79cff20
With the latest state of the code, the patch is passed to "import try one" as
parsed.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 18:10:53 +0200] rev 3672
import: grab the expected node value on the fly
We no longer parse the patch beforehand this will reduce inconsistency with
newer API.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 17:58:12 +0200] rev 3671
import: use a less direct approach to store the expected node
This will help later refactoring.
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 15:45:58 +0200] rev 3670
compat: adapt `amend --patch` to the new `patch.extract` API
Pierre-Yves David <pierre-yves.david@octobus.net> [Tue, 17 Apr 2018 15:04:15 +0200] rev 3669
compat: deal with change in the wireproto module
Martin von Zweigbergk <martinvonz@google.com> [Mon, 16 Apr 2018 12:46:23 -0700] rev 3668
branching: merge with stable
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 16 Apr 2018 20:18:10 +0200] rev 3667
topic: allow '.' in topic names
This is also commonly used.
Martin von Zweigbergk <martinvonz@google.com> [Mon, 16 Apr 2018 10:58:06 -0700] rev 3666
relocate: look up partial nodeids in unfiltered repo
This accidentally changed to using the filtered repo in commit
0f0f3135.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 16 Apr 2018 17:11:27 +0200] rev 3665
compat: avoid using partial node ID in lookup
This is getting deprecated in 4.6.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 16 Apr 2018 00:05:54 +0200] rev 3664
test: apply output change from protocaps
CORE-TEST-OUTPUT-UPDATE: afcfdf53e4b5
Pierre-Yves David <pierre-yves.david@octobus.net> [Sun, 15 Apr 2018 23:24:03 +0200] rev 3663
test: update output to match upstream
The exact wording for filtered error has been changed.
CORE-TEST-OUTPUT-UPDATE: ecd3f6909184
Martin von Zweigbergk <martinvonz@google.com> [Fri, 13 Apr 2018 09:26:28 -0700] rev 3662
evolve: don't pass stringified int to repo.__getitem__
We were doing repo['-1'], which is now deprecated. Switch to
repo['tip'], which is much clearer anyway (I initially thought this
was nullrev and sent an incorrect patch until Pierre-Yves corrected
me).
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 11 Apr 2018 07:23:34 +0200] rev 3661
patch: offer the user a chance to fix the patch if it fails to apply
The experience is still not great, but better than purely dropping the changes.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 18 Mar 2018 23:48:06 +0530] rev 3660
amend: add a new flag `--patch` to `hg amend`
This patch adds a new flag `--patch` to `hg amend` which pops up an editor with
the patch of working directory parent which you can change, and when you exit
the editor the patch with changes is applied to current working directory with
old changeset being obsoleted in favour of new one created by the applied patch.
If supplied filenames, only those filenames are present in the popped editor and
rest files stay the same way in the commit as they were.
The extension of the file which opens up in editor is '.diff', we cannot have it
as '.patch' as there will be develwarns related to that. We need to change to
patch core and undo some change to achieve this.
The implementation does not use any core API rather it has picked chunks from
API which are required. One main reason to not use core import API is that we
have to change wdir parent before using patch.patch() which I will like to avoid
to make sure we handle merge cases too. While writing this patch I have spend
lot of time try to use internal API's to work for this but none of them served
the purpose well. If I have time in future and work on similar problem again, I
am going to write better high-level API's which uses patchstore to achieve this.
A new test file test-amend-patch.t which contains a lot of testing of the
feature.
Anton Shestakov <av6@dwimlabs.net> [Thu, 12 Apr 2018 13:30:28 +0800] rev 3659
stablerangecache: include units in ui.progress() calls
Anton Shestakov <av6@dwimlabs.net> [Thu, 12 Apr 2018 13:28:30 +0800] rev 3658
stablerange: include units in ui.progress() calls
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 20:00:43 +0530] rev 3657
tests: add test demonstarting issue5833 is fixed
Previous patch which fixed issue5832 also fixed issue5833 as the root cause for
both was same. This patch adds test of issue5833 as well.
CHANEGLOG entry is also added for the fixed issues.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 20:13:27 +0530] rev 3656
utility: convert node from MultipleSuccessorsError to rev numbers (issue5832)
utility.builddependencies() deals with rev numbers but MultipleSuccessorsError
returns nodeid which breaks the function and also breaks instability resolution.
Previou patch demonstrate the breakage. This patch makes sure we convert those
nodeids to rev numbers before processing ahead.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 15:35:57 +0530] rev 3655
tests: add a test demonstarting issue5832 traceback
The traceback will be fixed in upcoming patches.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 14:56:27 +0530] rev 3654
CHANGELOG: add an entry about `hg evolve --abort`
Previous patches added a new flag `--abort` for `hg evolve` which aborts an
interrupted evolve. Currently this only works for orphan resolution cases which
is very common and most people use `evolve` for that. So let's add an entry
about that.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 17:34:51 +0530] rev 3653
evolve: restore bookmarks correctly after `hg evolve --abort`
This patch adds logic to store bookmark movements in evolvestate class and
restore bookmarks to their original place if `hg evolve --abort` is called.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 17:42:32 +0530] rev 3652
topic-ext: restrict the format of topic names
This patch restrict the format of topic names to make sure they consist only of
alphanumeric, '_' and '-' characters.
Pulkit Goyal <7895pulkit@gmail.com> [Fri, 06 Apr 2018 23:42:47 +0530] rev 3651
serverminitopic: wrap context.changectx.branch instead of context.changectx
Recently some changes in core resulted in this wrapping of class leading to an
infinite recursion. Let's wrap the particular function instead of wrapping the
whole command.
This fixes test-minitopic.t which was breaking.
Boris Feld <boris.feld@octobus.net> [Fri, 06 Apr 2018 17:53:41 +0200] rev 3650
templatekw: remove obsfatedata templatekw
Individuals fields are available in core as single template functions.
Kyle Lippincott <spectral@google.com> [Thu, 29 Mar 2018 13:01:05 -0700] rev 3649
evolve: do not exit 1 when there are no troubled changesets (issue5823)
There are possibly other cases we also do not wish to exit non-zero for in this
function, but I did not analyze them closely and am just looking at resolving
issue5823.
Pierre-Yves David <pierre-yves.david@octobus.net> [Fri, 06 Apr 2018 17:54:58 +0200] rev 3648
changelog: add an entry about the memory fixes
Anton Shestakov <av6@dwimlabs.net> [Fri, 06 Apr 2018 14:37:22 +0800] rev 3647
safeguard: use self instead of repo in noautopublishrepo.checkpush()
Referring to repo here was somehow preventing it from being garbage-collected
(important in hgweb, where currently every request gets a new repo).
Anton Shestakov <av6@dwimlabs.net> [Fri, 06 Apr 2018 14:36:36 +0800] rev 3646
stablerangecache: use self instead of repo in stablerangerepo.stablerange()
Referring to repo here was somehow preventing it from being garbage-collected
(important in hgweb, where currently every request gets a new repo).
Anton Shestakov <av6@dwimlabs.net> [Fri, 06 Apr 2018 14:26:24 +0800] rev 3645
obscache: use self instead of repo in obscacherepo.updatecaches()
Referring to repo here was somehow preventing it from being garbage-collected
(important in hgweb, where currently every request gets a new repo).
Boris Feld <boris.feld@octobus.net> [Wed, 04 Apr 2018 16:29:48 +0200] rev 3644
templatekw: fix templatedata for 46
Pierre-Yves David <pierre-yves.david@octobus.net> [Sat, 31 Mar 2018 11:53:09 +0200] rev 3643
style: fix a couple of pyflakes complains
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 16:43:28 +0530] rev 3642
evolve: add a `--abort` flag for `hg evolve` command
This patch adds a new flag `--abort` to `hg evolve` command which will abort the
interrupted evolve going on undoes the changes created by the evolve command
till now. The changes are bookmark movements, creation of evolved commits,
obsolete the old commits in favor of evolved commits.
In case when user changed things while the interrupted evolve, like did some
actions which created a new commit on top of evolved commits, or changed phase
of evolved commits to public, the evolve fails to abort as we should not strip
out the new commit formed by user neither we can strip the public changeset. The
abort fails and tell user to use `hg evolve --stop` instead.
Right now bookmark movement is broken, and will be fixed in upcoming patches.
Tests are added for the new flag.
Pulkit Goyal <7895pulkit@gmail.com> [Thu, 29 Mar 2018 16:38:00 +0530] rev 3641
evolve: don't allow updating or commiting when there is interrupted evolve
We should make things simple in the starting and restrict user from doing things
which can lead to problems.
This is same as the rebase behavior.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:47:49 +0530] rev 3640
evolve: internationalize the entry of --list in hg evolve help
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:37:10 +0530] rev 3639
evolve: add evolvestate as an argument to _finalizerelocate()
This will help us to store bookmark changes to evolvestate to revert them in
case when `hg evolve --abort` is called.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 28 Mar 2018 17:33:54 +0530] rev 3638
evolve: add evolvestate as an argument to evolvecmd.relocate()
This will help us in passing it to _finalizerelocate() and store the bookmark
changes which happend.