evolve: implement resolution of content-divergence when on differet parents This patch implements the basic version of resolution of content-divergence changesets when they are on different parents but one of the parent is gca of both the different parents. The functionality first relocates the divergent changeset which was left behind and then resolves the content-divergence like it resolves in normal cases. This is a very basic implementation because it still does not work on interrupted evolution. Test changes in this patch shows the basic functionality working. The output of dry-run is also required to be tweaked in such cased. Upcoming patches will add more tests and will improve the implementation to work during conflicts too.

tests: add tests for resolving content-divergence with parent change This patch adds a new test file test-evolve-content-divergence.t which tests the resolution of content divergence when the divergent changesets does not have the same parents.

CHANGELOG: add an entry about fixing issue5877

evolve: pop up editor if conflicts occur while merging commit messages Last patch added support for merging commit messages while resolving content divergence. In case of conflicts we fallback to one of the divergent commit messages. After this patch, we will pop up an editor where user has to resolve the conflicts in the commit messages and then continue. Tests are added for this. We need to fix handling in test-sharing.t to use HGEDITOR to fix conflicts and pass the new commit message. Future improvement can be that we should respect HGMERGE while merging commit descriptions too.

evolve: merge commit messages while resolving content-divergence (issue5877) While resolving content-divergence, there can be divergence in commit messages too which should be resolved. This patch uses the hg's internal merge API's to merge commit messages of divergent changesets with predecessor as the base. In case of conflicts, we fallback to divergent's commit message which should be changed in future. We should pop up the editor with the commit message and the conflict markers and let user fix that. Tests are added for the functionality added.

evolve: move if-else block under the right block the index related if-else should be only executed when all three base, divergent and other have different branch names. I coded this last night and mistakenly mis-indented it. Caught when I was adding more tests.

tests: make sure we don't result in commit messages conflict Upcoming patches will introduce functionality of merging commit messages while resolving content divergence which can lead to conflicts. We don't want to test the conflicts scenario here, so let's make sure there are no conflicts of commit messages in this test.

tests: don't use mkcommit shell function in test-divergent.t Upcoming series will start merging commit descriptions while resolving content-divergence. This tests are here to test the basics of content-divegrence resolution and we should not be testing much of commit description merge here. Replacing mkcommit function with normal hg calls will help us decide on the commit messages ourselves and prevent conflicts while merging commit messages.

evolve: remove duplicated documentation File saving failure…

evolve: show `hg help evolve.interrupted-evolve` in error when conflicts The help list various flags which you can use during interrupted evolve resolution and description about what they do. This will be very helpful for user on how to continue an interrupted evolve.

evolve: add a help topic `Interrupted-Evolve` This help topic contains description on how the various flags work during interrupted evolve. This help topic will be included in error message during interrupted evolve in next patch.

branching: merge with stable

changelog: fix version number error

evolve: return the new node formed only as the replacement sometimes, the the other content divergent changeset is obsoleted in favour of the local divergent changeset in which case we should not store that as a replacement because `hg evolve --abort` will strip that changeset. Let's make sure we return the newnode only if formed. The test results shows that we are still not 100% accurate as we need to strip an obsmarker.

tests: add more test of --abort flag for content-divergence resolution This patch adds test when we resolve multiple content-divergence changesets at once and resolution fo first content-divergence does not form new commits, resolution of second one leads to conflicts. As the output shows, we are wrongly stripping a changeset here, which should be fixed in next patch.

evolve: prompt user for branch selection while resolving content-divergence When resolving content-divergence, there can be case when both the content-divergent changesets are on different named branches. In that case, we are not sure which branch should the resolution commit should be on. This patch adds logic to prompt user to choose the branch which the resolution commit should be on and then creates the new resolution commit on that branch. This also adds a new test file which have tests for the branch selection feature we have added.

evolve: pass the base revision in _completecontentdivergent() We need the base revision to merge commit messages, branches and more stuff. Let's make sure we have that by passing into the function which completes the divergence resolution.

evolve: store the base of content-divergents in evolvestate We need the base changeset for merging commit messages, branches. Let's store it in evolvestate.

evolve: use cmdrewrite.amend() instead of creating a new commit This patch backs out changeset 88601e1cd5d8. We replaced cmdrewrite.amend() with creating new commit because using amend(), a high level function was not good and creating a new commit gave us more control over things. **HOWEVER** to get more control, you need to get arrange all the pieces together perfectly. Creating a new commit, the existing logic has some bugs around dirstate handling, the `repo.dirstate.setparents()` call especially. Sometimes this fixes the dirstate correctly sometimes not. As Pierre-Yves David said, "Having a "clumsy" implementation with the right behavior is usually a good first step. So having an amend based implementation seems like a good first step.", let's take a step back and get back using amend so that we can have a correct basic implementation which is bug free.

corecompat: update the tests output to show phase update summary eb9835014d20 in core added support to transactions to show a summary on the phase changed during that transaction. Due to this, couple of tests output needs to be updated. This patch does that. While realeasing evolve, this patch should be backed out on branches where hg<=4.6. CORE-TEST-OUTPUT-UPDATE: eb9835014d20

CHANGELOG: add an entry about issue 5808 being fixed

next-prev: replace the error hint to mention about `--merge` flag

tests: add tests for conflicts while respecting commands.update.check This patch adds tests to check that we don't run into conflicts while respecting commands.update.check. The error message now does not show the hint about --merge option which we should fix.

next: respect `commands.update.check` config option in `hg next` (issue5808) `commands.update.check` config option determines what level of checking should be done when we update to another revision. When we set this config option to `noconflict`, it updates your working directory to a specified revision only when there will be no conflicts which is a very nice behavior. This patch adds logic to respect the config option so that we can have that nice behavior with `hg next` too. It turns out, we just needed to use hg.updatetotally() and add some cases to check config option. Right now, we only respect the config if value is set to `noconflict`. Otherwise we fallback to the default behavior. This is a part of fixing issue5808. Test changes demonstrate the fix.

prev: respect `commands.update.check` config option in `hg prev` (issue5808) `commands.update.check` config option determines what level of checking should be done when we update to another revision. When we set this config option to `noconflict`, it updates your working directory to a specified revision only when there will be no conflicts which is a very nice behavior. This patch adds logic to respect the config option so that we can have that nice behavior with `hg prev` too. It turns out, we just needed to use hg.updatetotally() and add some cases to check config option. Right now, we only respect the config if value is set to `noconflict`. Otherwise we fallback to the default behavior. This is a part of fixing issue5808. Test changes demonstrate the fix.

tests: add test demonstrating issue5808 This patch adds test showing that `next` and `prev` does not respect the `commands.update.check` config option, particularly when set to `noconflict`.

next: bail out early in `hg next --evolve` if dirty wdir This patch adds logic to bail out early when --evolve is passed with next command and the working directory is dirty. This will help us in preventing the message saying `do you want --merge` which is useless and misleading when `--evolve` is passed.

tests: add test of `hg next --evolve` with dirty working directory I was testing some output change to `hg next --evolve` in dirty working directory and found that we don't have any test for that.

CHANGELOG: add an entry about fixing issue5897

evolve: fix `hg abort` when hg next --evolve leads to conflicts (issue5897) Before this patch, if you do `hg next --evolve` and end up having conflicts and then you try `hg abort`, it will throw a KeyError. This patch fixes that.

tests: add a test demonstrating issue5897 When conflicts are caused due to `hg next --evolve`, `hg evolve --abort` breaks! This patch adds test to demonstrate that. This will be fixed in next patch.

evolve: add an `--update` flag to `hg evolve` command This patch adds a new `--update` flag which defaults to True. The update flag updates the working directory to the head of evolved revisions after `hg evolve` command. This flag can be used to not update your working directory after `hg evolve` which has been one of the biggest feature request from fig team at Google. To not update your working directory, the user can do `hg evolve --no-update`. If the working directory get obsoleted by evolve command, it will update to the successor. This patch also adds some basic tests for the flag introduced.

tests: add tests for testing --abort while content-divergence resolution This patch adds a new test file with a very basic test of `--abort` on an interrupted evolve which was resolving content-divergence. Upcoming patches will add more rigourous tests.

evolve: fix storage of replacements and temprevs node in evolvestate The _completephaseivergent() was not respecting rules on how to store the new node ids created in evolvestate. The rules are: * store the temporary relocated commits in temprevs * store the final new commit in replacements This patch make sure we follow the above rules and also use the return value returned by _resolvephasedivergence(). The tests change demonstrates that we are all good now.

tests: add more tests related to aborting while resolving phase-divergence The tests shows the something is still broken related to abort while resolving phase-divergence which will be fixed in upcoming patches.

topic: suggest to clear a topic that becomes empty We add a hint suggesting "hg topic --clear" when a topic becomes empty. This usually happens when all its changesets get public, that is when the user does a 'phase -p' or when they pull from a server. To discriminate relevant cases for which we should display the hint (and typically exclude explicit 'hg topic --clear' operation), we look for the transaction "type" to only consider 'phase' or 'push' transaction. In the latter case, the transaction name is not simply 'push-response' but it also included the remote URL so we need to match on string content.

topic: display a hint pointing at help when a topic becomes non-empty This is an attempt at avoiding "mistakes" by new users of topics when they pull a topic and publish its changesets while being checked out. In this case, the topic will become empty but still be active; however, if this is a "foreign" topic, the user will not likely want to keep it active for the next commit operation. So we add a hint message pointing at general help of "topics" command so that they can eventually do something and learn about "hg topics --clear".

branching: merge with compat fix on default

evolve: add compat for repair.stripbmrevset which is moved to scmutil This patch adds compatibility logic for repair.stripbmrevset() which is moved to scmutil as bookmarkrevs(). This fixes test-prune.t failure.

evolve: update the readme with more information about contribution

topic: dedent items about publishing behavior in docstring Also change item bullets from '#' to '*'.

topic: use preformatted block for config snippets documentation We add :: markers, empty line and properly indent blocks where needed.

tests: add a test for "hg help -e topic" Currently, some configuration snippets do not render well; we'll fix this in forthcoming changesets.

branching: merge with stable

content-div: add test showing `--stop` works during interrupted resolution This patch adds a test showing that the --stop flag of `hg evolve` works well during interrupted content-divergence resolution. The --stop flag now works with all the three different type of instability resolution very well and we should advertise it more.

evolve: create new commit while resolving content-divergence Before this patch, we used to amend one of the content-divergent changes with the changes from the merge. Creating a new commit will certain advantages like letting user enter a commit message, showing user the new merge diff before commiting the content-divergent resolution and give us more control in the implementation part. The reason amend was used initially was just because it was easy. There are some tests update due to change.

content-divergence: store the resolved revs in evolvestate['replacements'] The support for continuing a conflicted content-divergence resolution was added some time ago. That support lacked storing of the resolved rev in the evolvestate['replacements'] which marks the node as resolved and does not try to resolve that node again. Since we didn't store, the resolution, processes the same node again. This patch makes sure we store the information in evolvestate that a certain content-divergent node is resolved to prevent pre-processing it again.

utility: use ui.interactive() instead of checking config value Before this patch, the rev selection prompt which pops up in case of ambiguity to ask user to select a rev used to check the config value of ui.interactive which can is by default set to None. We should use ui.interactive() instead which is more smart in such cases. Thanks to martinvonz for suggesting this.

evolve: make `--abort` strip the temporary revs created during resolution During divergence resolution, `hg evolve` created temporary relocation commits which needs to be stripped off during `hg evolve --abort` to get back to the same state where we were. Previous patch added a new list temprevs to be stored in evolvestate. This patch starts storing the temp relocated node created during phase-divergence resolution in evolvestate and make sure we consider stripping it too while `hg evolve --abort`. The test changes demonstrate the fix. Now we are sucessfully aborting a phase-divergence resolution.

evolve: store a list of temprevs in evolvestate There are temporary revisions which are created as a part of divergence resolution which needs to be stripped off if user runs `hg evolve --abort`. We need to save the nodeids of those temporary revisions in the evolvestate. The temprevs list will help in the above mentioned use cases.

evolve: check for None before adding in set of revisions to strip After previous patch, replacements can contain None. Let's make sure we don't add None to the revisions to strip during `hg evolve --abort` The test changes demonstrate the usefulness of this and the previous patch. Now abort is working and public changesets are not a problem.

evolve: return the new replacement node to be stored in evolvestate While resolving phase-divergence, we can end up obsoleting the phase-divergent commit in favor of the public commit. Before this patch we return the node of public commit to store as a replacement of the phase-divergent commit. The above will not cause any problem till the time we use `hg evolve --abort` on an interrupted evolve which tries to strip the replacement nodes because it thinks that the replacements nodes are the ones which are created during the resolution and are new. Since we will be stripping a public node, `evolve --abort` will error out saying cannot strip public changeset, unable to abort evolve which is bad. We should make sure, replacements should only consist of new nodes formed. If the instablity is resolved by obsoleting in favour of old changeset, we should not store the old changeset in replacements in evolvestate.

evolve: don't make values of replacements dict lists There was inconsistency in code base related to the values stored in replacements dict in evolvestate. At some places we store a list, at some places we just store the nodeid. Let's make sure we store only the nodeid, not a list. If there are cases, when there are multiple replacements or changesets created during resolution, later patch will introduce storing temprevs in evolvestate which should be used.

tests: add a test file `--abort` flag while resolving phase-divergence This patch adds a new test file test-evolve-abort-phasediv.t which will contain tests for `hg evolve --abort` flag while resolving phase-divergence. There is a case in this test which does not work right which will be fixed in upcoming patches.

evolve: pass revisions as strings to commands.*() It's usually fine to pass integer revisions to e.g. commands.update(), but when directaccess is enabled, it attempts to parse it a revset, which fails.

tests: rename test-evolve-abort.t to test-evolve-abort-orphan.t We renamed the test file because it contains all the cases related to orphan resolution. Now we care about divergence resolution too and hence we must have separate specific test files for each type.

branching: merge with branch for stable

compat: update obshashrange test output Mercurial core bfe8ef6e370e seems to have changed the order of some messages. Simply accept the change in the test file. CORE-TEST-OUTPUT-UPDATE: bfe8ef6e370e

test: update to new outputs Mercurial core ea63a2004d09 update the hidden changeset warning during update after the effective update. CORE-TEST-OUTPUT-UPDATE: ea63a2004d09

compat: fix obslog with Mercurial 4.6+ Mercurial core 3fe1c9263024 removed the diffopts attribute on changesetprinter. Backport consuming diffopts in the constructor for old versions of changesetprinter and update the non-graph code to extract the patch option and pass it directly.

debian: add line to clean-docs target to delete additional docs file

amend: use context manager for locks (issue5887)

evolve: point to '--abort' in verbose status message f6979d64b9fb (evolve: point to '--abort' in error message, 2018-04-22) changed "hg update -C ." to "hg evolve --abort" in error messages. This commit makes the same change in the verbose status message (the one that warns about unfinished evolve). There's still one mention "hg update -C" in our codebase. That's after "hg evolve --content-divergent" fails, but I don't think "hg evolve --abort" works in that case (yet?).

evolvecmd: add comments and new lines in content-divergence handling logic I have visited this logic three times in last 10 days and I have to re-read the whole code to make sure I don't miss any part. Adding comments will help understanding the code in better and fast way.

evolve: show cset hash in "merging conetnt-divergent changeset" While I was here I also mae de it repo.ui.status() instead of repo.ui.note() to align the behavior with rest of the messages.

evolve: show cset hash in "update to local conflict" message

evolve: use hg.updaterepo() instead of hg.update() to hide stats

evolve: fix the conflicts error message during content-divergence resolution Before last patch, we didn't had an automated way to continue an interrupted content-divergence resolution and we used to show a very long error message on how to continue manually. This patch replaces that long error message with nice small message which tells how to continue and how to abort. We still show `hg update -C .` to abort as we need to test and make `--abort` work in case of content-divergence.

evolve: add logic to continue interrupted content-divergence resolution We continue the interrupted content-divergence using the logic to complete content-divergence which we refactored in it's own function few patches ago. We had to delete evolvestate file before using cmdutil.amend() because otherwise we can't use the function. This leads to a hack which deletes the evolvestate file, we may want to not to use the high level API function here. Also we had to pass evolvestate also to _completecontentdivergent function because of this. This patch also, adds a test which demonstrates that the logic works fine.

evolve: store the evolvestate file when encountering conflicts This patch makes `hg evolve` store the evolvestate file when it encounters merge conflicts while resolving content-divergence.

evolve: take out logic to complete phase-divergence in separate fn This patch takes out the logic to complete the content-divergence resolution to it's own separate function so that we can reuse it in case of interrupted resolution.

evolve: store divergent nodes in evolvestate when resolving content-divergence We need to store the divergent nodes in evolvestate so that we can continue an interrupted phase divergence resolution.

branching: merge stable into default

tests: add test showing `hg evolve --stop` works fine with phase-divergence This patch adds a new test file which contains test demonstrating that `--stop` flag works well while resolving phase-divergence using `hg evolve`.

tests: rename the test file to add 'orphan' in the name test-evolve-stop.t contains test for `hg evolve --stop` for orphan resolution only. We also need to test the flag while resolving divergence. It will be good if we have a test file for each type of instability.

tests: test that `hg obslog wdir()` aborts with a useful message

obshistory: make obslog work when a commit doesn't have any description This logic is taken from logcmdutil.changesetprinter class. It checks that commit description is not empty before extracting the first line (before this patch it would try to index an empty list). Stripping description also makes obslog behave more like regular log when there are trailing/leading whitespaces.

obshistory: use a more appropriate type for obslog entries cand is actually a regular changeset and not 'M' (graphmod.MISSINGPARENT). And 'M' is only used for graph edges, but cand is drawn as a graph node. Visually there's no effect, but the code makes more sense this way.

packaging: mark as development version This help avoiding confusion when installing from source.

branching: merge with latest release

packaking: mark as development version This avoid confusion when installing from source.

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

test-compat: merge stable into mercurial-4.5

Added tag 8.0.0 for changeset 116cdd8c102a

packaging: update version number

packagin: update `tested-with` statement

changelog: mention 4.6 compatibility

Changelog: pre-version gardening

testcompat: update output for Mercurial 4.3 Lets of minor update + one major update to tests/test-evolve-phase-divergence.t since all hashed chance (different instability name).

test-compat: merge mercurial-4.4 into mercurial-4.3

test-compat: merge mercurial-4.5 into mercurial-4.4

testcompat: revert output change from new capabilities This new capabilities is 4.6 only.

testcompat: revert output change from 54a469cd5b26 These are 4.6 only changes.

testcompat: revert output change from 1de6ba0ac6d7 These are 4.6 only changes.

testcompat: merge stable into mercurial-4.5

compat: handle different `ui.edit` signature with Mercurial 4.3

wirepeer: try modern module first This avoid some issue with remaining .pyc

compat: handle lack of allpredecessors for Mercurial 4.3

branching: merge further fix into stable

wrapping: fix a silly error were we checking on module and wrapping the other ...

brancing: merge next release into default We are about to release hg-evolve 8.0.0

test-compat: open mercurial-4.5 branch

evolve: point to '--abort' in error message The way to escape and evolve run has been updated and we need to tell our user about it.

compat: drop compatibility layer for pager All versions we support now support `ui.pager`.

compat: drop compatibility layer for duplicatecopies We no longer support version before Mercurial 4.3.

compat: drop compatibility layer for bookmark.applychanges We now only support Mercurial version down to 4.3.

compat: from compatibility layer for allprecursors We only support down to 4.3 now.

compat: drop compatibility layer for successorssets We support down to Mercurial 4.3 now.

compat: drop compatibility wrapper for "relevantmarkers" We no longer support version without the logic we have been adding.

compat: drop compat layer for cleanupnodes We no longer support version lower than 4.3.

compat: from compatibility layer for createmarkers We support down to 4.3 now. It supports operation.

compat: drop obsutile layer Mercurial 4.2 is no longer supported.

compat: drop vfsmod compat layer Mercurial 4.2 is no longer supported.

evolve: use in code filtered error for 4.6 Things have been upstream into core for a while, let us use them instead of the evolve version.

documentation: refer to 4.3 in the help text Minimal version supported is now 4.3. Drop reference to 4.2 in the help.

topic: remove compatibility for older version in discovery wrapping Support for 4.1 and 4.2 has been dropped.

obscache: drop compat layer to access public changeset We can now access precomputed sets. (compat to 4.1 and 4.2 dropped)

obscache: drop compat layer for obsmarkers reading We cna now use a version with the argument we needs.

template: drop compatibility layer Support has been dropped for 4.1 and 4.2

timer: drop compat layer for time Support for 4.1 and 4.2 has been dropped.

compat: drop support for Mercurial 4.2 Since Mercurial 4.6 is about to be released, we drop support for 4.2 too. (code still need to be cleaned up).

compat: close test-compat branch for mercurial-4.2 Support for this version have just been dropped.

evolve: add support for hg >= b4d85bc1 Mercurial commit b4d85bc1 deleted the wireproto module and its contents are now in various other modules, so we can not even do unchecked imports of it now.

discovery: handle deletion of 'wireproto' module Mercurial commit b4d85bc122bd. deleted the wireproto module and its contents are now in various other modules, so we can not even do unchecked imports of it now.

evolve: handle wireproto module deletion for registering new commands Module have been deleted in b4d85bc122bd. We can no longer import it blindly.

minitopic: handle wireproto module change from b4d85bc122bd This module have been scattered in other place, so we need to detect and handle this for 4.6+

topic: handle wireproto module change from b4d85bc122bd This module have been scattered in other place, so we need to detect and handle this for 4.6+