Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 29 Aug 2014 10:13:44 +0200] rev 1076
discovery: hook on the official discovery for obsmarker
This will let the discovery be done once and used by core.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 27 Aug 2014 12:05:49 +0200] rev 1075
discovery: use a different setup step for discovery
This will ease the dropping of the other part later.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 27 Aug 2014 12:04:57 +0200] rev 1074
evolve: remove unused drop random
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 27 Aug 2014 12:02:53 +0200] rev 1073
obshash: resist to unknown revision during discovery
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 27 Aug 2014 10:49:58 +0200] rev 1072
code movement: gather discovery code together
The discovery code is the one thing that will survive the great purge.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 27 Aug 2014 10:53:09 +0200] rev 1071
bundle2: drop custom compat
We'll rely on the core implementation to use bundle2.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 27 Aug 2014 10:22:50 +0200] rev 1070
drop relevant marker compat
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 27 Aug 2014 10:21:30 +0200] rev 1069
evolve: always use the transaction version of phase movement
This drop compat with all known released version of Mercurial.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 27 Aug 2014 10:29:31 +0200] rev 1068
evolve: drop debugobsoleterelevant
Core gained this capability usig `hg debugobsolete --rev REV`
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 20 Aug 2014 20:49:48 -0700] rev 1067
evolve: yield to relevant markers handling in core
The handling of obsolescence marker is now performed in core. If we detect a
mercurial with such power we skip the wrapping from evolve.
This changeset also suffer from massive diff from the change in display of
obsolescence marker with parent information introduced at the same time in core.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 20 Aug 2014 21:14:49 -0700] rev 1066
test-wireproto: adapt to output change from core
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 15 Aug 2014 17:07:55 -0700] rev 1065
test: update test to new date formatting in debuobsolete output
The date is now a first class citizen with proper formatting.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 15 Aug 2014 16:39:42 -0700] rev 1064
test: update help output to future 3.2
Pierre-Yves David <pierre-yves.david@fb.com> [Mon, 18 Aug 2014 15:57:44 -0700] rev 1063
merge with stable
Faheem Mitha <faheem@faheem.info> [Sun, 17 Aug 2014 05:05:22 +0530] rev 1062
pkg: make tests pass using the generated tarball
Exclude tests/test-drop.t and include tests/_exc-util.sh,
tests/dummyssh, and hgext/simple4server.py.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 15 Aug 2014 17:42:19 -0700] rev 1061
compat: always call metadata as a keyword argument
Those function are gaining more arguments. using keyword argument keep use safe
in all version.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 15 Aug 2014 16:54:32 -0700] rev 1060
test: work around a bug in debugobsolete
The defautl date was wrong all along. So we use a fixed date for all tests.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 15 Aug 2014 12:56:01 -0700] rev 1059
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 15 Aug 2014 00:46:23 -0700] rev 1058
uncommit: add a --rev argument
The uncommit command now taks a --rev argument. This lets restore the file
content in the current commit to another revision (instead of just is parent
content). This still does not touch the working directory content.\
This allow the longly awaited:
hg uncommit --hidden --rev 'precursors(.)'
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 14 Aug 2014 15:30:04 -0700] rev 1057
readme: add missing changelog entry
My dear friends changelog.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 14 Aug 2014 15:26:55 -0700] rev 1056
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 14 Aug 2014 15:17:02 -0700] rev 1055
import: handle patch with no node information
patch created by old Mercurial version or other tool have no node information.
We cannot create marker in this case.
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 14 Aug 2014 15:14:18 -0700] rev 1054
import: compare binary node with binary node when using --obsolete
hex(N) != N
Pierre-Yves David <pierre-yves.david@fb.com> [Sun, 10 Aug 2014 23:58:31 -0700] rev 1053
README: fix version number
Faheem Mitha <faheem@faheem.info> [Mon, 11 Aug 2014 01:57:09 +0530] rev 1052
relocate: fix typo
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 23:16:24 -0700] rev 1051
merge back with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 23:15:43 -0700] rev 1050
Added tag 4.1.0 for changeset 4d5d101e878f
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 23:15:26 -0700] rev 1049
pkg: prepare release 4.1.0
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 23:14:00 -0700] rev 1048
merge default into stable
Release 4.1.0 is coming
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 23:02:26 -0700] rev 1047
evolve: adds a --confirm option
This option lets the use double check if it wants the evolve operation.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 23:11:09 -0700] rev 1046
evolve: gather evolve output together
We stop relying on ui.status being muted when --quiet is used. Instead we use
plain write and hide this behind an explicite ui.quiet check.
This will help use enforcing this output in the comming --confirm mode.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 21:06:48 -0700] rev 1045
doc: forgotten amend
Pierre-Yves David <pierre-yves.david@fb.com> [Thu, 12 Jun 2014 14:41:13 -0700] rev 1044
evolve: attempt to clarify the documentation around --all and --any
This have been confusing to people. We try to be a bit more verbose in the
evolve help.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 18:15:01 -0700] rev 1043
evolve: re enable progress for all
Progress is an important information for user facing slow push.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 18:06:08 -0700] rev 1042
evolve: stop pretending we are pulling markers when we don't
If discovery did not found any unknown marker, we should not display the
"pulling marker" message.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 18:01:02 -0700] rev 1041
evolve: do not even try to pull if all remote markers are known
previously we were explicitly pulling an empty bundle.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 17:49:22 -0700] rev 1040
evolve: add "obsolescence" in front of marked in the previous message
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 17:46:20 -0700] rev 1039
evolve: make the "X markers added" message during pull important
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 17:40:01 -0700] rev 1038
evolve: make the "pulling obsolescence marker" message important
This is likely to take some time the user needs to know what is going on.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 17:34:22 -0700] rev 1037
evolve: add "absolescence" in front of markers in the message
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 17:29:29 -0700] rev 1036
evolve: re-introduce the "pushing 42 markers…" message
Informing the user about marker behind pushed sounds a good idea.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 17:16:29 -0700] rev 1035
evolve: hide the OBSEXC message behind a config option
This will lets most people ignore them while keep evolve dev having a close look
at them.
Some of the most useful messages will be reintroduced for all in coming
changeset.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 17:10:31 -0700] rev 1034
evolve: move OBSEXC progress in a dedicated function
This will help use to rework them.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 16:48:38 -0700] rev 1033
evolve: move OBSEXC message in a dedicated function
This will help use to rework them.
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 15:55:04 -0700] rev 1032
merge with stable
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 15:50:26 -0700] rev 1031
Added tag 4.0.1 for changeset e914884fb721
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 15:43:07 -0700] rev 1030
evolve: prepare release 4.0.1
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 15:48:42 -0700] rev 1029
evolve: fix distribution for 4.0.0
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 15:40:19 -0700] rev 1028
evolve: update readme
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 15:33:39 -0700] rev 1027
evolve: update tested with statement
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 08 Aug 2014 10:40:47 -0700] rev 1026
test: apply message changes introduced by mercurial 3.1
Pierre-Yves David <pierre-yves.david@fb.com> [Fri, 25 Jul 2014 14:27:16 +0200] rev 1025
test: use `hg log` in the `getid` function
using `hg id` to retrieve full lenght node requires to use --debug. This may
include debug output (regarding branch cache invalidation for example) that
breaks the test. We now use `hg log` with a custom template. This is a simple,
clean and robust solution.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 06 Aug 2014 17:05:57 -0700] rev 1024
evolve: add a tr arguement to retractboundary
Mercurial core is adding a transaction argument to its phase movement function.
We do the same. If Mercurial appears to be an old version (without the extra
args) we call it the old way.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 06 Aug 2014 18:10:00 -0700] rev 1023
relocate: add transaction around phase movement
cheap way to acces access to the transaction object
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 06 Aug 2014 17:14:00 -0700] rev 1022
uncommit tr
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 06 Aug 2014 18:06:17 -0700] rev 1021
evolve: saner locking an transaction in `hg evolve`
Each trouble solved used to handle locking and transaction on its own. We now
have a top level locking and transaction. This will helps use making sure phase
are moved within a transaction.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 06 Aug 2014 17:08:51 -0700] rev 1020
uncommit: saner locking scheme
(and do it in the right order in the process)
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 06 Aug 2014 17:40:55 -0700] rev 1019
prune: lock inside the try
tss…
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 06 Aug 2014 17:39:32 -0700] rev 1018
debugrecordpruneparents: release tr the same way than the lock
Nicer code is nicer.
Pierre-Yves David <pierre-yves.david@fb.com> [Wed, 06 Aug 2014 17:37:28 -0700] rev 1017
evolve: drop useless wlock in rewrite