Pulkit Goyal <7895pulkit@gmail.com> [Tue, 22 May 2018 23:51:57 +0530] rev 3758
utility: use ui.interactive() instead of checking config value
Before this patch, the rev selection prompt which pops up in case of ambiguity
to ask user to select a rev used to check the config value of ui.interactive
which can is by default set to None.
We should use ui.interactive() instead which is more smart in such cases.
Thanks to martinvonz for suggesting this.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:46:20 +0530] rev 3757
evolve: make `--abort` strip the temporary revs created during resolution
During divergence resolution, `hg evolve` created temporary relocation commits
which needs to be stripped off during `hg evolve --abort` to get back to the
same state where we were. Previous patch added a new list temprevs to be stored
in evolvestate.
This patch starts storing the temp relocated node created during
phase-divergence resolution in evolvestate and make sure we consider stripping
it too while `hg evolve --abort`.
The test changes demonstrate the fix. Now we are sucessfully aborting a
phase-divergence resolution.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:43:23 +0530] rev 3756
evolve: store a list of temprevs in evolvestate
There are temporary revisions which are created as a part of divergence
resolution which needs to be stripped off if user runs `hg evolve --abort`. We
need to save the nodeids of those temporary revisions in the evolvestate.
The temprevs list will help in the above mentioned use cases.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:36:14 +0530] rev 3755
evolve: check for None before adding in set of revisions to strip
After previous patch, replacements can contain None. Let's make sure we don't
add None to the revisions to strip during `hg evolve --abort`
The test changes demonstrate the usefulness of this and the previous patch. Now
abort is working and public changesets are not a problem.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:33:14 +0530] rev 3754
evolve: return the new replacement node to be stored in evolvestate
While resolving phase-divergence, we can end up obsoleting the phase-divergent
commit in favor of the public commit. Before this patch we return the node of
public commit to store as a replacement of the phase-divergent commit.
The above will not cause any problem till the time we use `hg evolve --abort` on
an interrupted evolve which tries to strip the replacement nodes because it
thinks that the replacements nodes are the ones which are created during the
resolution and are new.
Since we will be stripping a public node, `evolve --abort` will error out saying
cannot strip public changeset, unable to abort evolve which is bad.
We should make sure, replacements should only consist of new nodes formed. If
the instablity is resolved by obsoleting in favour of old changeset, we should
not store the old changeset in replacements in evolvestate.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:39:38 +0530] rev 3753
evolve: don't make values of replacements dict lists
There was inconsistency in code base related to the values stored in
replacements dict in evolvestate. At some places we store a list, at some places
we just store the nodeid. Let's make sure we store only the nodeid, not a list.
If there are cases, when there are multiple replacements or changesets created
during resolution, later patch will introduce storing temprevs in evolvestate
which should be used.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 02:41:08 +0530] rev 3752
tests: add a test file `--abort` flag while resolving phase-divergence
This patch adds a new test file test-evolve-abort-phasediv.t which will contain
tests for `hg evolve --abort` flag while resolving phase-divergence.
There is a case in this test which does not work right which will be fixed in
upcoming patches.
Martin von Zweigbergk <martinvonz@google.com> [Tue, 15 May 2018 22:17:27 -0700] rev 3751
evolve: pass revisions as strings to commands.*()
It's usually fine to pass integer revisions to e.g. commands.update(),
but when directaccess is enabled, it attempts to parse it a revset,
which fails.
Pulkit Goyal <7895pulkit@gmail.com> [Wed, 23 May 2018 01:27:13 +0530] rev 3750
tests: rename test-evolve-abort.t to test-evolve-abort-orphan.t
We renamed the test file because it contains all the cases related to orphan
resolution. Now we care about divergence resolution too and hence we must have
separate specific test files for each type.
Pierre-Yves David <pierre-yves.david@octobus.net> [Mon, 21 May 2018 16:56:52 +0200] rev 3749
branching: merge with branch for stable
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 16:25:29 +0200] rev 3748
compat: update obshashrange test output
Mercurial core bfe8ef6e370e seems to have changed the order of some messages.
Simply accept the change in the test file.
CORE-TEST-OUTPUT-UPDATE: bfe8ef6e370e
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 14:56:51 +0200] rev 3747
test: update to new outputs
Mercurial core ea63a2004d09 update the hidden changeset warning during update
after the effective update.
CORE-TEST-OUTPUT-UPDATE: ea63a2004d09
Boris Feld <boris.feld@octobus.net> [Mon, 21 May 2018 13:07:49 +0200] rev 3746
compat: fix obslog with Mercurial 4.6+
Mercurial core 3fe1c9263024 removed the diffopts attribute on
changesetprinter. Backport consuming diffopts in the constructor for old
versions of changesetprinter and update the non-graph code to extract the
patch option and pass it directly.
Faheem Mitha <faheem@faheem.info> [Sat, 19 May 2018 18:26:36 +0530] rev 3745
debian: add line to clean-docs target to delete additional docs file
Martin von Zweigbergk <martinvonz@google.com> [Mon, 14 May 2018 15:25:38 -0700] rev 3744
amend: use context manager for locks (issue5887)
Martin von Zweigbergk <martinvonz@google.com> [Thu, 10 May 2018 21:37:28 -0700] rev 3743
evolve: point to '--abort' in verbose status message
f6979d64b9fb (evolve: point to '--abort' in error message, 2018-04-22)
changed "hg update -C ." to "hg evolve --abort" in error
messages. This commit makes the same change in the verbose status
message (the one that warns about unfinished evolve).
There's still one mention "hg update -C" in our codebase. That's after
"hg evolve --content-divergent" fails, but I don't think "hg evolve
--abort" works in that case (yet?).
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 22 Apr 2018 20:14:42 +0530] rev 3742
evolvecmd: add comments and new lines in content-divergence handling logic
I have visited this logic three times in last 10 days and I have to re-read the
whole code to make sure I don't miss any part. Adding comments will help
understanding the code in better and fast way.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:18:54 +0530] rev 3741
evolve: show cset hash in "merging conetnt-divergent changeset"
While I was here I also mae de it repo.ui.status() instead of repo.ui.note() to
align the behavior with rest of the messages.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:14:41 +0530] rev 3740
evolve: show cset hash in "update to local conflict" message
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:11:29 +0530] rev 3739
evolve: use hg.updaterepo() instead of hg.update() to hide stats
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 19:04:18 +0530] rev 3738
evolve: fix the conflicts error message during content-divergence resolution
Before last patch, we didn't had an automated way to continue an interrupted
content-divergence resolution and we used to show a very long error message on
how to continue manually.
This patch replaces that long error message with nice small message which tells
how to continue and how to abort. We still show `hg update -C .` to abort as we
need to test and make `--abort` work in case of content-divergence.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:51:56 +0530] rev 3737
evolve: add logic to continue interrupted content-divergence resolution
We continue the interrupted content-divergence using the logic to complete
content-divergence which we refactored in it's own function few patches ago.
We had to delete evolvestate file before using cmdutil.amend() because otherwise
we can't use the function. This leads to a hack which deletes the evolvestate
file, we may want to not to use the high level API function here. Also we had to
pass evolvestate also to _completecontentdivergent function because of this.
This patch also, adds a test which demonstrates that the logic works fine.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:48:36 +0530] rev 3736
evolve: store the evolvestate file when encountering conflicts
This patch makes `hg evolve` store the evolvestate file when it encounters merge
conflicts while resolving content-divergence.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 18:13:29 +0530] rev 3735
evolve: take out logic to complete phase-divergence in separate fn
This patch takes out the logic to complete the content-divergence resolution to
it's own separate function so that we can reuse it in case of interrupted
resolution.
Pulkit Goyal <7895pulkit@gmail.com> [Sun, 29 Apr 2018 17:54:01 +0530] rev 3734
evolve: store divergent nodes in evolvestate when resolving content-divergence
We need to store the divergent nodes in evolvestate so that we can continue an
interrupted phase divergence resolution.
Pierre-Yves David <pierre-yves.david@octobus.net> [Wed, 02 May 2018 11:59:06 +0200] rev 3733
branching: merge stable into default
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 28 Apr 2018 18:44:07 +0530] rev 3732
tests: add test showing `hg evolve --stop` works fine with phase-divergence
This patch adds a new test file which contains test demonstrating that `--stop`
flag works well while resolving phase-divergence using `hg evolve`.
Pulkit Goyal <7895pulkit@gmail.com> [Sat, 28 Apr 2018 18:03:32 +0530] rev 3731
tests: rename the test file to add 'orphan' in the name
test-evolve-stop.t contains test for `hg evolve --stop` for orphan resolution
only. We also need to test the flag while resolving divergence. It will be good
if we have a test file for each type of instability.
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:28:34 +0800] rev 3730
tests: test that `hg obslog wdir()` aborts with a useful message
Anton Shestakov <av6@dwimlabs.net> [Fri, 27 Apr 2018 16:19:45 +0800] rev 3729
obshistory: make obslog work when a commit doesn't have any description
This logic is taken from logcmdutil.changesetprinter class. It checks that
commit description is not empty before extracting the first line (before this
patch it would try to index an empty list).
Stripping description also makes obslog behave more like regular log when there
are trailing/leading whitespaces.