evolve: close transaction if conflict is detected in relocate (issue4966)
Before this patch, transaction is aborted, if conflict is detected at
merging while "hg evolve".
Since 8f2ff40fe9c9 (or 3.6) of Mercurial, aborting transaction
discards all dirstate changes inside transaction scope for
"transactional dirstate" (see below wiki page for detail about it).
https://mercurial.selenic.com/wiki/DirstateTransactionPlan
Therefore, just aborting transaction causes unchanged (and unexpected)
dirstate, even though subsequent commands require dirstate changes
while "hg evolve".
To keep dirstate changes while "hg evolve", this patch closes current
running transaction, if conflict is detected in relocate(), even
though exception is raised as usual.
Even though "save dirstate and restore it after aborting transaction"
like shelve._aborttransaction() of Mercurial can also solve this
issue, this patch chose closing transaction for similarity with
failure for conflict at "hg unshelve". In addition to it, closing
transaction can keep any previous (implicit) changes.
In newly added test, there is an additional ancestor revision, which
"will be evolved safely". It is used to examine whether failure for
conflict doesn't discard already relocated revision(s) while "hg
evolve".
It is fact for current implementation that "hg evolve" relocates each
revisions in separated transactions and already relocated ones are
never discarded, even if subsequent relocation fails. Though, this
examination is useful to detect unintentional regression in the
future.
Initial setup
$ . $TESTDIR/_exc-util.sh
=== A.3 new branch created ===
.. {{{
.. B' ○⇢ø B
.. | |
.. \Aø⇠◔ A'
.. \|/
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * `Aø⇠○ A'`
.. * `Bø⇠○ B'`
..
.. Command run:
..
.. * hg push -r A
..
.. Expected exchange:
..
.. * chain from A
..
.. Expected Exclude:
..
.. * chain from B
..
.. Extra note:
..
.. If A and B are remontly known, we should expect:
..
.. * `hg push` will complain about the new head
.. * `hg push` should complain about unstable history creation
initial
$ setuprepos A.3.a
creating test repo for test case A.3.a
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B0
$ hg update -q 0
$ mkcommit A1
created new head
$ hg update -q 0
$ mkcommit B1
created new head
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
$ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
$ hg log -G --hidden
@ f6298a8ac3a4 (draft): B1
|
| o e5ea8f9c7314 (draft): A1
|/
| x 6e72f0a95b5e (draft): B0
| |
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ hg debugobsolete
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
Actual Test for first version (changeset unknown in remote)
-----------------------------------------------------------
$ dotest A.3.a A1
## Running testcase A.3.a
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
1 new obsolescence markers
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
other variant: changeset known in remote
----------------------------------------
$ setuprepos A.3.b
creating test repo for test case A.3.b
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B0
$ hg push -q ../pushdest
$ hg push -q ../pulldest
$ hg update -q 0
$ mkcommit A1
created new head
$ hg update -q 0
$ mkcommit B1
created new head
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
$ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
$ hg log -G --hidden
@ f6298a8ac3a4 (draft): B1
|
| o e5ea8f9c7314 (draft): A1
|/
| x 6e72f0a95b5e (draft): B0
| |
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ hg debugobsolete
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
Actual Test for first version (changeset unknown in remote)
-----------------------------------------------------------
check it complains about multiple heads
$ cd A.3.b
$ hg push -R main -r e5ea8f9c7314 pushdest
pushing to pushdest
searching for changes
abort: push creates new remote head e5ea8f9c7314!
(merge or see "hg help push" for details about pushing new heads)
[255]
$ cd ..
test obsmarkers exchange.
$ dotest A.3.b A1 -f
## Running testcase A.3.b
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files (+1 heads)
remote: 1 new obsolescence markers
## post push state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
1 new obsolescence markers
(run 'hg heads' to see heads, 'hg merge' to merge)
1 new unstable changesets
## post pull state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}