builddependencies: consider all divergent successors
We were only considering one. In test-evolve-abort-conentdiv.t:165,
the input revs were {5, 8} and dependency dict was {8: set([]), 5:
set([10])}, which is a little weird (10 is not in the input set). It
still worked because the callers used it (they seemed to only care if
there were *any* dependencies).
This patch fixes the issue by considering all successors. That means
the dependency dict will be {8: set([]), 5: set([8, 10])} after this
patch. The next patch will remove the 10 from that set.
============================================
Testing obsolescence markers push: Cases A.3
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category A: simple cases
TestCase 3: old branch split in two, only one of the new one pushed
Variants:
# a: changesets are known on remote
# b: changesets are known on remote (push needs -f)
A.3 new branchs created, one pushed.
====================================
.. {{{
.. B' ○⇢ø B
.. | |
.. \Aø⇠◔ A'
.. \|/
.. ● O
.. }}}
..
.. Markers exist from:
..
.. * `A ø⇠○ A'`
.. * `B ø⇠○ B'`
..
.. Command runs:
..
.. * hg push -r A
..
.. Expected exchange:
..
.. * chain from A
..
.. Expected exclude:
..
.. * chain from B
..
.. Extra note:
..
.. If A and B are remontly known, we should expect:
..
.. * `hg push` will complain about the new head
.. * `hg push` should complain about unstable history creation
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos A.3.a
creating test repo for test case A.3.a
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B0
$ hg update -q 0
$ mkcommit A1
created new head
$ hg update -q 0
$ mkcommit B1
created new head
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
obsoleted 1 changesets
1 new orphan changesets
$ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
obsoleted 1 changesets
$ hg log -G --hidden
@ f6298a8ac3a4 (draft): B1
|
| o e5ea8f9c7314 (draft): A1
|/
| x 6e72f0a95b5e (draft): B0
| |
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
obshashtree
===========
a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0000000000000000000000000000000000000000
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0000000000000000000000000000000000000000
e5ea8f9c73143125d36658e90ef70c6d2027a5b7 3bc2ee626e11a7cf8fee7a66d069271e17d5a597
f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 91716bfd671b5a5854a47ac5d392edfdd25e431a
obshashrange
============
rev node index size depth obshash
3 e5ea8f9c7314 0 2 2 3bc2ee626e11
4 f6298a8ac3a4 0 2 2 91716bfd671b
0 a9bdc8b26820 0 1 1 000000000000
3 e5ea8f9c7314 1 1 2 3bc2ee626e11
4 f6298a8ac3a4 1 1 2 91716bfd671b
$ cd ..
$ cd ..
Actual Test for first version (changeset unknown in remote)
-----------------------------------------------------------
$ dotest A.3.a A1
## Running testcase A.3.a
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
1 new obsolescence markers
new changesets e5ea8f9c7314
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
other variant: changeset known in remote
----------------------------------------
$ setuprepos A.3.b
creating test repo for test case A.3.b
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B0
$ hg push -q ../pushdest
$ hg push -q ../pulldest
$ hg update -q 0
$ mkcommit A1
created new head
$ hg update -q 0
$ mkcommit B1
created new head
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
obsoleted 1 changesets
1 new orphan changesets
$ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'`
obsoleted 1 changesets
$ hg log -G --hidden
@ f6298a8ac3a4 (draft): B1
|
| o e5ea8f9c7314 (draft): A1
|/
| x 6e72f0a95b5e (draft): B0
| |
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
obshashtree
===========
a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0000000000000000000000000000000000000000
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0000000000000000000000000000000000000000
e5ea8f9c73143125d36658e90ef70c6d2027a5b7 3bc2ee626e11a7cf8fee7a66d069271e17d5a597
f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 91716bfd671b5a5854a47ac5d392edfdd25e431a
obshashrange
============
rev node index size depth obshash
3 e5ea8f9c7314 0 2 2 3bc2ee626e11
4 f6298a8ac3a4 0 2 2 91716bfd671b
0 a9bdc8b26820 0 1 1 000000000000
3 e5ea8f9c7314 1 1 2 3bc2ee626e11
4 f6298a8ac3a4 1 1 2 91716bfd671b
$ cd ..
$ cd ..
Actual Test for first version (changeset known in remote)
-----------------------------------------------------------
check it complains about multiple heads
$ cd A.3.b
$ hg push -R main -r 'desc(A1)' pushdest
pushing to pushdest
searching for changes
abort: push creates new remote head e5ea8f9c7314!
(merge or see 'hg help push' for details about pushing new heads)
[255]
$ cd ..
test obsmarkers exchange.
$ dotest A.3.b A1 -f
## Running testcase A.3.b
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files (+1 heads)
remote: 1 new obsolescence markers
remote: obsoleted 1 changesets
remote: 1 new orphan changesets
## post push state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
1 new obsolescence markers
obsoleted 1 changesets
1 new orphan changesets
new changesets e5ea8f9c7314
(run 'hg heads' to see heads, 'hg merge' to merge)
## post pull state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}