evolve: compat patch for recordfilter change in mercurial
This patch fix the broken things because of upstream changes in
recordfilter() which is being used to select the hunks interactively.
It fixes the test-uncommit-interactive.t by adding the compat layer.
But for test-split.t I had to fix the tests manually. To make it more
clear: splitting broke at evolve side because after that upstream change
now interactive mode doesn't prompt "examine change to foo" if foo is
mentioned explicitly using cli; and directly jumps to hunks selection
prompt (well, only if there is any changes at hunks level)
And the main issue is when file which is explicitly mentioned has no changes
at hunk level (for e.g copy, rename, mode change, empty new file), because in
that case you don't have any control on selection of that file and it would
be included automatically in first cycle of interactive selection.
And this "no changes at hunks level" was the reason for test-split.t breakage
as now it didn't prompt for those files which are passed on cli.
To fix this I have included some content in those files to make sure that
tests still demonstrate the same behaviour as they were doing before breakage.
Also, I replaced some "n" with "s" as it make more sense to skip all the
changes to that file in one go instead of hitting "n" multiple times
(if there were multiple hunks)
============================================
Testing obsolescence markers push: Cases C.2
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category C: advanced case
TestCase 2: Pruned changeset on precursors
Variants:
# a: explicite push
# b: bare push
C.2 Pruned changeset on precursors
==================================
.. {{{
.. B ⊗
.. |
.. A ø⇠◔ A'
.. |/
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * A' succeed to A
.. * B (prune)
..
.. Command run:
..
.. * hg push -r A'
.. * hg push
..
.. Expected exchange:
..
.. * `A ø⇠o A'`
.. * B (prune)
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
Itinial
$ setuprepos C.2
creating test repo for test case C.2
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B
$ hg prune -qd '0 0' .
$ hg update -q 0
$ mkcommit A1
created new head
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
obsoleted 1 changesets
$ hg log -G --hidden
@ e5ea8f9c7314 (draft): A1
|
| x 06055a7959d4 (draft): B
| |
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
obshashtree
===========
a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
28b51eb45704506b5c603decd6bf7ac5e0f6a52f cfacc7f87b22bba57fd24c3472f08d00c33ada5d
06055a7959d4128e6e3bccfd01482e83a2db8a3a b5ae2ee85cbc1b157410b51cd9fe78fb5bb753cf
e5ea8f9c73143125d36658e90ef70c6d2027a5b7 945a85093e28fbda8065db6933af09acd8d22524
obshashrange
============
rev node index size depth obshash
3 e5ea8f9c7314 0 2 2 945a85093e28
0 a9bdc8b26820 0 1 1 000000000000
3 e5ea8f9c7314 1 1 2 945a85093e28
$ cd ..
$ cd ..
$ cp -R C.2 C.2.a
$ cp -R C.2 C.2.b
Actual Test (explicit push)
---------------------------
$ dotest C.2.a A1
## Running testcase C.2.a
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 2 new obsolescence markers
## post push state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
2 new obsolescence markers
new changesets e5ea8f9c7314 (1 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Actual Test (bare push)
-------------------------------------
$ dotest C.2.b
## Running testcase C.2.b
## initial state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 2 new obsolescence markers
## post push state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
2 new obsolescence markers
new changesets e5ea8f9c7314 (1 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}