evolve: don't use graftstate for continuing `hg evolve`
Before this patch, if user runs `hg evolve`, we read the evolve state, write a
graftstate from that information and run graft command. This patch replaces that
logic with new logic which does not depends on the graft state.
The new logic is very filtered part of logic from graft command. We did not
require a lot of opts checking and filtering revs logic from the graft command
as our use case is fixed.
This is the start of series/work which will make `hg evolve` better and have
a good statefile for itself.
============================================
Testing obsolescence markers push: Cases B.4
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category B: pruning case
TestCase 4: Pruned changeset on common part of the history
Variants:
# a: explicite push
# b: bare push
B.4 Pruned changeset on common part of history
=============================================
.. {{{
.. ⊗ C
.. | ● B
.. | |
.. | ● A
.. |/
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * C (prune)
..
.. Command run:
..
.. * hg push -r B
.. * hg push
..
.. Expected exchange:
..
.. * prune for C
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos B.4
creating test repo for test case B.4
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A
$ mkcommit B
$ hg phase --public .
$ hg push ../pushdest
pushing to ../pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
$ hg push ../pulldest
pushing to ../pulldest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 2 changesets with 2 changes to 2 files
$ hg update -q 0
$ mkcommit C
created new head
$ hg prune -qd '0 0' .
$ hg log -G --hidden
x 7f7f229b13a6 (draft): C
|
| o f6fbb35d8ac9 (public): B
| |
| o f5bc6836db60 (public): A
|/
@ a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
obshashtree
===========
a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 000a06f93df9cdd3c570d38aef8cd21a4a25df9b
f5bc6836db60e308a17ba08bf050154ba9c4fad7 ff621c458a04f2994124b0ef4b43572f7eb2335a
f6fbb35d8ac958bbe70035e4c789c18471cdc0af 5afda6754e34bfe9ac1942df123711f929054273
7f7f229b13a629a5b20581c6cb723f4e2ca54bed f3513f70438639d6687bbec74f4d3fd11853f471
obshashrange
============
rev node index size depth obshash
2 f6fbb35d8ac9 0 3 3 000000000000
1 f5bc6836db60 0 2 2 000000000000
0 a9bdc8b26820 0 1 1 000a06f93df9
1 f5bc6836db60 1 1 2 000000000000
2 f6fbb35d8ac9 2 1 3 000000000000
$ cd ..
$ cd ..
$ cp -R B.4 B.4.a
$ cp -R B.4 B.4.b
Actual Test (explicit push version)
-----------------------------------
$ dotest B.4.a O
## Running testcase B.4.a
# testing echange of "O" (a9bdc8b26820)
## initial state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
# obstore: pushdest
# obstore: pulldest
## pushing "O" from main to pushdest
pushing to pushdest
searching for changes
no changes found
remote: 1 new obsolescence markers
## post push state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
# obstore: pulldest
## pulling "a9bdc8b26820" from main into pulldest
pulling from main
no changes found
1 new obsolescence markers
## post pull state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
# obstore: pulldest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
Actual Test (bare push version)
-----------------------------------
$ dotest B.4.b
## Running testcase B.4.b
## initial state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
no changes found
remote: 1 new obsolescence markers
## post push state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
no changes found
1 new obsolescence markers
## post pull state
# obstore: main
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
# obstore: pushdest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)
# obstore: pulldest
7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (*) {'ef1': '*', 'user': 'test'} (glob)