next: prompt user to choose child in ambiguity in `hg next --evolve`
This patch makes `hg next --evolve` prompt user to choose a child to evolve and
update when multiple of them exists. This is improvement over previous behavior
where we used to error out saying ambiguous next unstable changeset and told
user to manually use `hg evolve -r rev`. While writing this patch, I am
personally very happy to have this feature as I have encountered this stage many
times and I wanted `next --evolve` to take care of that.
It uses the revselectionprompt thing added in earlier patches.
============================================
Testing obsolescence markers push: Cases C.2
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category C: advanced case
TestCase 2: Pruned changeset on precursors
Variants:
# a: explicite push
# b: bare push
C.2 Pruned changeset on precursors
==================================
.. {{{
.. B ⊗
.. |
.. A ø⇠◔ A'
.. |/
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * A' succeed to A
.. * B (prune)
..
.. Command run:
..
.. * hg push -r A'
.. * hg push
..
.. Expected exchange:
..
.. * `A ø⇠o A'`
.. * B (prune)
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
Itinial
$ setuprepos C.2
creating test repo for test case C.2
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B
$ hg prune -qd '0 0' .
$ hg update -q 0
$ mkcommit A1
created new head
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
obsoleted 1 changesets
$ hg log -G --hidden
@ e5ea8f9c7314 (draft): A1
|
| x 06055a7959d4 (draft): B
| |
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
obshashtree
===========
a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
28b51eb45704506b5c603decd6bf7ac5e0f6a52f 3ef2e3b1b37e7a3a8a885b2ff08fa626f1d3aaa9
06055a7959d4128e6e3bccfd01482e83a2db8a3a 75187bd51740051fdf046fae67687fb056343515
e5ea8f9c73143125d36658e90ef70c6d2027a5b7 163059af30d498e215e86e1ead6ab749521c38be
obshashrange
============
rev node index size depth obshash
3 e5ea8f9c7314 0 2 2 163059af30d4
0 a9bdc8b26820 0 1 1 000000000000
3 e5ea8f9c7314 1 1 2 163059af30d4
$ cd ..
$ cd ..
$ cp -R C.2 C.2.a
$ cp -R C.2 C.2.b
Actual Test (explicit push)
---------------------------
$ dotest C.2.a A1
## Running testcase C.2.a
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 2 new obsolescence markers
## post push state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
2 new obsolescence markers
new changesets e5ea8f9c7314
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
# obstore: pulldest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
Actual Test (bare push)
-------------------------------------
$ dotest C.2.b
## Running testcase C.2.b
## initial state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 1 changesets with 1 changes to 1 files
remote: 2 new obsolescence markers
## post push state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
2 new obsolescence markers
new changesets e5ea8f9c7314
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
# obstore: pushdest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)
# obstore: pulldest
06055a7959d4128e6e3bccfd01482e83a2db8a3a 0 {28b51eb45704506b5c603decd6bf7ac5e0f6a52f} (*) {'ef1': '*', 'user': 'test'} (glob)
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (*) {'user': 'test'} (glob)