evolve: make sure user can recover from conflict (issue6053)
we make sure while continuing interrupted evolve it reach to right code
This patch fix the issue6053 which is about falling evolve into unrecoverable
state and this is how it call fall into it:
If after some rewrite operations we reach to a point where resparent for
two content divergent csets is obsolete and we hit a conflict in
relocation, so now if you run `hg evolve --continue` after resolving
the conflict: code execution would check if wdir parent is obsolete
and run solveobswdp() rather than going to continueevolve() part
and there we will hit by a "abort: outstanding uncommitted merge"
And same for `--abort` or `--stop` flags.
Changes in tests reflect the fixed behaviour.
============================================
Testing obsolescence markers push: Cases D.3
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category D: Partial Information Case
TestCase 3: missing prune target (prune not in "pushed set")
D.3 missing prune target (prune not in "pushed set")
====================================================
.. {{{
.. A ø⇠✕ A'
.. | |
.. | ○ B
.. |/
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * `A ø⇠o A'`
.. * A' (prune)
..
.. Command runs:
..
.. * hg push
..
.. Expected exclude:
..
.. * `A ø⇠o A'`
.. * A' (prune)
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos D.3
creating test repo for test case D.3
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ hg up -q 0
$ mkcommit B
created new head
$ mkcommit A1
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
obsoleted 1 changesets
$ hg prune -d '0 0' .
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
working directory now at 35b183996678
1 changesets pruned
$ hg strip --hidden -q 'desc(A1)' --config devel.strip-obsmarkers=no
$ hg log -G --hidden
@ 35b183996678 (draft): B
|
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
28b51eb45704506b5c603decd6bf7ac5e0f6a52f 6aa67a7b4baa6fb41b06aed38d5b1201436546e2 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6aa67a7b4baa6fb41b06aed38d5b1201436546e2 0 {35b1839966785d5703a01607229eea932db42f87} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
obshashtree
===========
a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04 0000000000000000000000000000000000000000
28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0000000000000000000000000000000000000000
35b1839966785d5703a01607229eea932db42f87 d864ed12a58243aaedc35c1d065dba31aa787d4c
obshashrange
============
rev node index size depth obshash
2 35b183996678 0 2 2 d864ed12a582
2 35b183996678 1 1 2 d864ed12a582
0 a9bdc8b26820 0 1 1 000000000000
$ cd ..
$ cd ..
Actual Test
-----------
$ dotest D.3 O
## Running testcase D.3
# testing echange of "O" (a9bdc8b26820)
## initial state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f 6aa67a7b4baa6fb41b06aed38d5b1201436546e2 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6aa67a7b4baa6fb41b06aed38d5b1201436546e2 0 {35b1839966785d5703a01607229eea932db42f87} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "O" from main to pushdest
pushing to pushdest
searching for changes
no changes found
## post push state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f 6aa67a7b4baa6fb41b06aed38d5b1201436546e2 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6aa67a7b4baa6fb41b06aed38d5b1201436546e2 0 {35b1839966785d5703a01607229eea932db42f87} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pulling "a9bdc8b26820" from main into pulldest
pulling from main
no changes found
## post pull state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f 6aa67a7b4baa6fb41b06aed38d5b1201436546e2 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6aa67a7b4baa6fb41b06aed38d5b1201436546e2 0 {35b1839966785d5703a01607229eea932db42f87} (Thu Jan 01 00:00:00 1970 +0000) {'ef1': '0', 'operation': 'prune', 'user': 'test'}
# obstore: pushdest
# obstore: pulldest