[server] Make connection pooler configurable and set better default values Drop the configuration connections-pool-size and add new configurations options: * connections-pool-min-size. Set to 0 by default so we open connections only when needed. This avoid opening min-size*processes connections at startup, which is, it think, a good default. * connections-pool-max-size. Set to 0 (unlimited) by default, so we move the bottleneck to postgresql. * connections-idle-timeout. Set to 10 minutes. I don't have arguments about this except that this is the default in pgbouncer.

[server] Enhance connections-pooler-enabled documentation

[server] move connection pooler initialization logic to get_cnxset() This avoid complex logic in Repository initialization.

[server] dynamically close idle database connections When pool hasn't been empty for `idle_timeout` time, start closing connections.

[server] implement dynamic database pooler Opening too much database connection has a cost at startup and also PostgreSQL as a maximum number of connection (100 by default). This get worse when starting multiple wsgi processes, since each process has its own database pool. Instead of opening `connections-pool-size` connections to the database at startup, just open one and open more only when needed.

[server] use a LifoQueue in _CnxSetPool In postgresql, some cache is attached to the connection. Using a LifoQueue (last-in, first-out) makes a few connections to get the most load which give best performance.

[server] extract creating a new cnxset in a _new_cnxset() helper So we can move logic specific to _CnxSetPool here.

[server] avoid a possible race condition on _CnxSetPool.close() The pool could become empty between time to check and time to use.

[server] extract "no pooler" CnxSet class to a _BaseCnxSet class So we get rid of "if self._queue is None" in each method of _CnxSetPool Also add helper get_cnxset(source, size) to instantiate the correct pooler class.

[server] prevent returning closed cursor to the database pool In since c8c6ad8 init_repository use repo.internal_cnx() instead of repo.system_source.get_connection() so it use the pool and we should not close cursors from the pool before returning it back. Otherwise we may have "connection already closed" error. This bug only trigger when connection-pool-size = 1. Since we are moving to use a dynamic pooler we need to get this fixed. This does not occur with sqlite since the connection wrapper instantiate new cursor everytime, but this occur with other databases.

[rql] Store selected variables for RQL select queries in ResultSet (#17218476) By storing the name of the selected variables for RQL select queries in the ResultSet (within the "variables" attribute), the information can be passed down to specific protocols, e.g. rqlio that may wish to pass is down further to clients. In turn, clients can then choose to present the results of RQL select queries as symbolic bindings using the names used in the query's projection, instead of ordinal arrays.

[debugtoolbar] Make SQL and RQL tables sortable It's usefull to sort query by duration for instance.

[debugtoolbar] Do not render CW controller panel when no controller got collected This can happen on pure pyramid applications for instance.

[doc] Fix bugs in code examples

[doc] Remove zone cube which causes to crash on install The zone cube is not compatible with python3.

[doc] Precise which component to modify in gallery tutorial

[doc] Fix example about Community view customization

[doc] Add command pip install of new cube

[doc] update cubicweb version

[doc, blog tutorial] Remove cubicweb-dev from pip dependencies This pip package does not exist

[doc] Add requirement for gettext and graphviz When running the tutorial from scratch, I had errors because these two packages were not installed.

Added tag 3.27.3, debian/3.27.3-1 for changeset 85284f028266

[pkg] version 3.27.3

[pkg] require python >= 3.6 in debian packaging

[pkg] merge 3.27 Require python >= 3.6 since recent typing notations require >= 3.6

[pkg] add python3 only pypi specifiers This is only for pypi statistics purposes. Also add 'Programming Language :: Python', looks obvious but seems to be sane to have this as well.

[pkg] the wheel is no longer universal Since we're only py3 compatible. In practice this changes nothing since we don't upload cubicweb wheels to pypi.

[pkg] require python >= 3.4 This avoid pip pulling a version that does not run on python2 when using a python2 environment. Since we already released some 3.27 releases in pypi, I think we should release 3.27.3 and remove releases 3.27.2, 3.27.1 and 3.27.0 from pypi.

merge public heads

[web.views] add Link alternate in HTTP response header in HTML view Team: famarger, schabot, nchauvat, fferry, ethieblin

[pyramid] add routes /{eid} and /{etype}/{eid} to return RDF when rdf mimetype in Accept HTTP headers * simplify pyramid/resources.py by making the classmethod that returns a closure a simple function and removing the EntityResource and ETYpeResource classes that are barely used * replace predicate MatchIsETypePredicate with MatchIsETypeAndEIDPredicate Team: famarger, schabot, nchauvat, fferry, ethieblin

[entities] simplify rdf generation and add a generic rdf adapter Team: famarger, schabot, nchauvat, fferry, ethieblin

Added tag 3.26.17, debian/3.26.17-1 for changeset 5c6d242069b6

[pkg] version 3.26.17

[fix, calendar] Ensure that the buffer is a string 'unicode' is not defined in python3

Added tag 3.26.16, debian/3.26.16-1 for changeset fb6aecd654a3

[pkg] version 3.26.16

[ldapfeed] add option to enable starttls on ldap servers Modern ldap servers connection often use, or even require starttls.

[ldapfeed] re-enable ldap tests for python 3.7 This was disabled because ldap3<2 wasn't compatible with python 3.7 While I'm here, drop unseless newline.

[ldapfeed] make code compatible with ldap3>=2 * Some constants have been renamed. * Directly bind when data-cnx-dn/data-cnx-password are provided, some servers, including ours require this. * Use raise_exceptions=True to avoid ignored ldap errors * raise in case of failed anonymous bind * do not search for "dn" attribute because this raise an "invalid attribute" with new ldap3 versions * Password is now returned as bytes, so no longer need to encode them before crypt. * modification_date is now returned as a datetime object Co-Authored-By: Philippe Pepiot <philippe.pepiot@logilab.fr> Closes #16073071

[ldapfeed] use LDAP_SCOPES to find user-scope We already have LDAP_SCOPES dict defining possible scopes, this avoid possible code injection from config... Thus we can drop global variables already defined in LDAP_SCOPES since they are not used directly anymore.

Merge 3.27

Added tag 3.27.2, debian/3.27.2-1 for changeset e731c31eaed0

[pkg] version 3.27.2

[ldapfeed] add option to enable starttls on ldap servers Modern ldap servers connection often use, or even require starttls.

[ldapfeed] re-enable ldap tests for python 3.7 This was disabled because ldap3<2 wasn't compatible with python 3.7 While I'm here, drop unseless newline.

[ldapfeed] make code compatible with ldap3>=2 * Some constants have been renamed. * Directly bind when data-cnx-dn/data-cnx-password are provided, some servers, including ours require this. * Use raise_exceptions=True to avoid ignored ldap errors * raise in case of failed anonymous bind * do not search for "dn" attribute because this raise an "invalid attribute" with new ldap3 versions * Password is now returned as bytes, so no longer need to encode them before crypt. * modification_date is now returned as a datetime object Co-Authored-By: Philippe Pepiot <philippe.pepiot@logilab.fr> Closes #16073071

[ldapfeed] use LDAP_SCOPES to find user-scope We already have LDAP_SCOPES dict defining possible scopes, this avoid possible code injection from config... Thus we can drop global variables already defined in LDAP_SCOPES since they are not used directly anymore.

[ldapfeed] drop now useless import from __future__

[rdf] Add a basic foaf adapter for CWUser By the way, use RDFLib namespaces

[rdf] add functions and tools to generate rdf graph

[pyramid, predicate] Add a predicate that matches if the pattern is an eid in the DB

[server.querier] construct ExecutionPlan from schema since querier is not needed

[server.querier] remove useless attribute Querier._planner

[server.querier] remove useless indirection Querier.rqlannotator

[server.querier] remove useless indirections ExecutionPlan.{syssource,rqlhelper,schema} Simpler is better.

[server.rqlannotation] rename SQLGenAnnotator to RQLAnnotator This class is in charge of annotating the RQL syntax tree with various bits of information, like (in)variance, use of full-text-index, etc. It is a needed step before the generation of SQL, but does not touch SQL directly. Hence RQLAnnotator seems a better name.

[server] drop system_source_cnx for a simpler internal API system_source_cnx() can be replaced with source_cnx(). If system_source_cnx() is called with dbms_system_base=False, it is strictly equivalent to calling source_cnx() with the same source, privileges and interactivity. If system_source_cnx() is called with dbms_system_base=True, it is equivalent to calling source_cnx() with the system database and the same source, privileges and interactivity. No use of the default value for 'special_privs' was found in the code.

[server/sources/native] refactor to remove useless injection

[cwvreg] rename CWRegistryStore.solutions to compute_var_types solutions() seems an obscure name to me. Since this method computes the types of the variables of the RQL query string, let us rename it to compute_var_types.

[doc] replace python with python3 in shell commands

[adapters] move class EntityAdapter from cubicweb.view to cubicweb.entity The adapter mechanism is not specific to the use of views. Moving the class the cubicweb.entity makes this clearer.

[doc] replace tabs with spaces (and make linter happy)

[setup] add rdflib-jsonld to dependencies for cubicweb[rdf]

Added tag 3.26.15, debian/3.26.15-1 for changeset fe9bd0e937e4

[pkg] version 3.26.15

[web/views] Backport changeset be63e0fd43d0 (it is a fix) in 3.26

[utils] Add the possibility to add elements in the head of an UStringIO list

[doc] replace python with python3 in shell commands

Added tag 3.27.1, debian/3.27.1-1 for changeset 917601bb5b1b

[pkg] version 3.27.1

Backed out changeset 7d3299d6e655 This is not compatible with python 3.5 and we want to support python 3.5 with cubicweb 3.27

Backed out changeset c69421aece24 This is not compatible with python 3.5 and we want to support python 3.5 with cubicweb 3.27

merge

[web/views/rdf] enhance encoding and formats for RDFView

[web/views/cwuser] fix encoding of FoafView to application/rdf+xml

merge 3.27 into default

[doc/dev/CI] initial information about jenkins

[doc/index] fix link to "how to contribute" and add link to dev dashboard

[doc/book/admin] initial version of deploy cubicweb page in documentation

[doc/book/admin/setup] forget about easy_install

[doc/book/admin/setup] fix pip / virtualenv links

[doc/book/admin/setup] update apt sources

[doc/book/admin/setup] add section about docker install

[doc] remove setup instructions for Windows

[doc/book/devweb/ajax] warning about deprecated use of ajax

[doc] add links to pypi and npm

[doc] remove guestrepo as a recommendation

[doc] remove Subversion mentions

[doc] fix typo

[doc] Update changes title, 3.27 is now released

[pkg] Version 3.28.0.dev0

merge 3.27

Added tag 3.27.0, debian/3.27.0-1 for changeset e77900f19390

[pkg] version 3.27

Backed out changeset b1ef9690f357 This is not compatible with python3.5

Remove useless error FindEntittyError This error is not used since the deprecated find_one_entity method has been removed in 566f8fce5168

[pkg] Version 3.27.0rc3

[sobjects/notification] fix broken email notifications In https://hg.logilab.org/review/cubicweb/rev/8caa109dfe945592a34904bb56971cc57d1c6084 EntityView.w become a method using EntityView._w In notifications we reset "self.w" for every notifications since we handle multiple streams. We should set "self._w" to None instead, otherwise subsequent calls to "self.w()" will fail with TypeError: 'NoneType' object is not callable.

[server.source.native] exceptions should never pass silently

[py] Make flake8 less angry with cubicweb/server/test/

[doc/fix] correct link to screenshots in changelog Closes #17260396

closing branch 3.23

closing branch 3.22

closing branch 3.21

closing branch 3.20

[server/querier] drop ExecutionPlan.annotate_rqlst that is never used

[server.querier] improve docstrings and comments

[mypy] type AppObject.category

[mypy] type Hook.events

[mypy] type __select__ everywhere

[python3] 'unicode' function doesn't exist anymore

[mypy/fix] Incompatible types in assignment (expression has type "staticmethod", variable has type "Callable[[ETag], Any]")

[py] Make flake8 less angry with cubicweb/server/sources/

[mypy/fix] Module 'urllib' has no attribute 'quote'

autopep8

[python3] replace 'unicode' by 'str'

autopep8

[test] ensure FirefoxHelper successfully exited

[test/ux] add a warning when test from FirefoxHelper timeout

[test/fix] tempfile is non portable linux command and is useless here Closes #17260390

[test/fix] prevent FirefoxHelper from silently failing to start This was breaking some tests without any obvious error message and you should fail as early as possible to make debugging easier. Closes #17260390

[doc] document debug toolbar

[doc] document new debug channels mechanism

DeprecationWarning: Please use assertEqual instead.

[doc/fix] listing of js_api in index was broken

[doc] cubicweb.server.session.Session doesn't exist anymore

[doc] remove autodoc for functions and class that don't exist anymore

[doc/fix] BwCompatCWRegistry class doesn't exist anymore

[doc] set_/free_cnxset method doesn't exist anymore

[refactoring] rename logilab.database as db to logilab_database

[UX] make error message explicit with useful information

[refactoring] blank lines to visually group lines for lisbility

[refactoring] class variable is useless

[comment] add comment for maybe unhandled situation

[refactoring] don't hide exceptions

[refactoring] blank lines to make core more readable

[refactoring] not needed anymore in python3

[refactoring] inline useless variable

[debug_channels/doc] add docstring to functions

[doc/building/fix] encoding issue was crashing sphinx in python3

[pkg] Version 3.27.0rc2

[changelog] talk about the new debug channels mechanism

[changelog] add information about the new debug html attributes

[changelog] change bullet point organization So everything related to the debugtoolbar is close to its section.

[changelog] document the new toolbar panels with screenshots

[comment] comment didn't matched reality

[debug-toolbar/display_source_code] change link display from "<>" to "[source]" It is way more explicit and understandable and doesn't take that much place.

[tox] add doc8 target to test documentation

[doc8] D002 Trailing whitespace

[doc/conf] update year of copyright

[doc/book] add RQL use cases with search/card/python/javascript Related to https://www.cubicweb.org/ticket/3899077

[debug-toolbar/fix] only import mako when the toolbar is loaded

[pkg] require logilab-common >= 1.5.2 Followup a902521

[web/views] Fix AutoformSectionRelationTags.set_muledit_editable It is a method call, so `self` is passed implicitely as first argument, so it is useless to pass it also explicitely as second argument. In fact, it does not work without this. A monkey patch had been done in a private client's project, but the fix is revelant for everyone.

[html] Add tags ol, ul, li, i, q - It is useful. - A private client's project use this.

[debug-toolbar/registry] move to Registry.add_select_best_listener new api

[pkginfo] Retrieve Cubicweb version using pkg_resources

[pkginfo] Remove unused parameter To retrieve cube dependencies or cube requirements, no more need to pass the 'oldkey' parameter to _cube_deps function as this parameter is unused.

Fix flake8 issues cubicweb/server/sources/native.py:505: [E501] line too long (101 > 100 characters) cubicweb/pyramid/__init__.py:31: [E501] line too long (104 > 100 characters)

Add missing dbmako/mako files in python sdist

[debug] add in each html snippet from where it has been generated in the code Closes #17219704

Use python3 shebang for scripts Reported by lintian "python-script-but-no-python-dep"

[pkg] Version 3.27.0rc1

[debug-toolbar/display_source_code] add links to files in tracebacks

[debug-toolbar] link to source code of all objects/classes Closes #17256791

[debug-toolbar/display_source_code] add a function to add links to source file in traceback Closes #17256791

[debug-toolbar/display_source_code] add function to generate html link to source code

[debug-toolbar/display_source_code/security] add security mechanism to only read whitelisted files Closes #17256791

[debug-toolbar/display_source_code] add helper to render link to source file Closes #17256791

[debug-toolbar/display_source_code] add a pyramid view that display syntax highlighted python source file This will be used for tool building for easier debugging. Closes #17256791

[mod] allow to pass generic additional arguments to pygments HtmlFormatter

[debug/fix] ensure that not syntax highlighted code is a string Otherwise it could be in another unrendered form that makes marko complains. Closes #17256791

[debug-toolbar] add registry decisions debug panel Closes #17219866

Increase needed version of logilab-common to >= 1.5.0

[debug-toolbar] add registry panel Closes #17219866

[debug-toolbar] add sql panel Closes #17219873

[debug-toolbar] add cw general panel with controller Closes #17219897

[debug-toolbar] make linter happy

[pyramid/ctl/debugtoolbar] automatically include custom panels on -t

[debug-toolbar/rql] display sql queries generated by rql ones

[debug-toolbar/rql] add RQL panel Closes #17219673

[debug/emit/rql] add RQL debug channel and emit queries This is used for the RQL debug panel but can be used as a generic mechanism for several tools.

[debug/source_highlight] rename highlight to highlight_terminal

[debug/source_highlight] add highlight_html and generate_css for debugtool panels

[debug/rql] bind a uniq token per rql to trace its decomposition This is aimed to be used by the RQL debug panel (and the SQL one later on) but can also be used by other debugging tools.

[debug] add a new channel events mechanism for debugging

[ctl] allow to specific instance name for instance commands in $CW_INSTANCE Closes #17253994

[cubicweb/utils] add QueryCache.__contains__() to improve dict-like behavior. Closes #255426

[migrations/pdb] add to every failing migration operation a "p(db)" option Instead, the migration command will just crash without offering the possibility of the user to debug or continue the migration. Closes #17219772

[pyramid/ctl] add a new option to activate the debugtoolbar (-t) While this toolbar isn't yet very integrated with CW, it integrates an inline debugging shell like werkzeug for flask or django_extensions which greatly helps debugging on exception. It can already be manually activated by writting "pyramid.includes = pyramid_debugtoolbar" but it's hidden somewhere in the documentation and not very accessible and annoying to do. Closes #17219765

[changelog] add missing information to the 3.27 changelog

Merge 3.26

[debug] add ALL possibility to --dbglevel

[ux] display instance name in suggested upgrade command

[migration/pdb] display traceback instead of only the exception for easier debugging Closes #17219820

[migration/pdb] add option to use pdb.post_mortem if traceback is provided Post mortem is a mode where the pdb shell is opened **where** the exception as occured instead at the breakpoint for set_trace. This is way more useful for debugging for the user because is will have the full context of the error. Closes #17219827

[migration/shell] select ipdb if present on (d)ebug mode Closes #17219833

[mod] move get_pdb to utils.py

Add a migration function in order to relocate bfss Related to https://www.cubicweb.org/ticket/1903304

[pyramid/debug] on every request display request path and selected controller This will display lines like: 2019-06-12 16:26:57 - (cubicweb.pyramid.bwcompat) INFO: REQUEST [view] '/wiki/334037' selected controller <cubicweb.web.views.basecontrollers.ViewController object at 0x7f133802ae90> at /root/.virtualenvs/abreton/local/lib/python2.7/site-packages/cubicweb/web/views/basecontrollers.py:120 2019-06-12 16:26:59 - (cubicweb.pyramid.bwcompat) INFO: REQUEST [data] '/data/ea5eb3b6f89fba0ff4b671093c88d3dd/images/cartouche-mur.jpg' selected controller <cubicweb.web.views.staticcontrollers.DataController object at 0x7f1332a84d50> at /root/.virtualenvs/abreton/local/lib/python2.7/site-packages/cubicweb/web/views/staticcontrollers.py:179 The make debugging easier as this isn't done already. Most other web frameworks do something similar for the developper to be able to understand what is happening right now. Closes #17219741

[logging/debug] move transaction operations logs from self.debug to DBG_OPS There were a mixing between displaying transaction operations log on logger.debug and only when DBG_OPS was on, uniformize everything behind DBG_OPS. Closes #17229126

[debug] syntax highlight SQL and RQL debug output This prevent DBG_RQL and DBG_SQL output to looks like a gigantic blob of white text. Do this only if we detect that we are in a tty and that pygments is installed. Closes #17222885

[logging] send logs by default to stdout Following the move to have commands only working on foreground sending logs to a file by default doesn't make much more sens anymore so send them to stdout by default and add a new option to send them to a file if needed

[cubicweb-ctl] backport --dbglevel option of pyramid to all instance commands Closes #17219653

[cubicweb-ctl] backport --loglevel option of pyramid to all instance commands

[cubicweb-ctl/fix] correctly get exception traceback_ for pdb.post_mortem In python 3 the behavior of sys.exc_info had a very subtle change: - in python 2 you can call if whenever you want after a try/except statement and you'll get information about this last raise - ipython 3, once you get out of try/except, sys.exc_info is cleaned and you'll get (None, None, None) Hardened the test to avoid this error from happening again.

Document mercurial configuration for contributing * how to use master/review repositories * how to send the "Available at" command in patchbomb emails * how to add the "cubicweb" flag in patchbomb emails * how to use our "jenkins" mercurial extension Closes #17243538

Add documentation on workflow permission

Remove undefined function in documentation

Merge 3.26

[pyramid/ctl] pyramid command will always run in foreground from now on Daemonization used to make sens in the past, but today "pyramid" command is only used for dev and should never be used for deployement (you should use a wsgi server for that instead) so daemonization doesn't fit any use case anymore. Closes #17232923

[clean] remove pyramid warning about looping task This warning isn't useful anymore.

[doc] add instruction to re-enable ckeditor

[fix] reference to underclared and unused variable kwargs

Avoid to update inlined relation column to NULL when deleting entities When deleting entities, cubicweb run a rql DELETE on all relations to trigger hooks. For an inlined relation this also mean set the column to NULL. This operation may fail if there's additional constraints on the column. Also this is a weird and useless behavior since deleting the entity row will by definition delete the relation. We still doesn't handle the case where both subject and object are going to be deleted because rows need to be deleted in a particular order that cubicweb doesn't handle. Add a test checking UPDATE does not occur but hooks are correctly called. Closes #17236690

Drop useless ConstraintInsertionTC This test does nothing and is here from the begining of repo history. Now it raise an error "TypeError: Skipped expected string as 'msg' parameter, got 'SkipTest' instead. Perhaps you meant to use a mark?" Just drop it.

Backed out changeset 741dc2590f90 It was for cube s3storage, but this piece of information was apparently not in the email (used for review), so this patch was published in the wrong repository. :-/

[.gitlab-ci] initial version (tox targets)

Merge with 3.26

Added tag debian/3.26.14-1, 3.26.14 for changeset 172f683a84f6

[pkg] version 3.26.14

[py3] Pass bytes as "msg" to smtplib.SMTP.sendmail() When passing a unicode string to smtplib.SMTP.sendmail() as "msg" argument, there is an implicit bytes encoding using "ascii" encoding in python3. Of course this does not work if the string contains non-ASCII characters. In fact, config's sendmails method intent to pass bytes to smtplib.SMTP.sendmail() as it uses msg.as_string() method. Unfortunately, in python3, this method returns a unicode string whereas it returns a bytes string in python2; we thus fix this by calling as_bytes() method on python3. As there is no "as_bytes" method in python2, we need to handle python2 compatibility by hand and either call as_string() or as_bytes(). In testlib, where we mock smtplib.SMTP, we need to keep the "msg" argument of Email class (defined in testlib as well) a unicode string. Otherwise, it fails to be parsed by email.message_from_string() (from stdlib) if it is bytes on python3.

[debian] Cleanup d/source/options from now gone symlinks

[pkg] Version 3.27.0.a2

[debug/clean] remove unused DBG_MS flag

Avoid using gone hooks_control() in migration This deprecated function got dropped in a8c1ea390400. Remove unused import in 3.10.9_Any.py migration; replace usage in bootstrapmigration_repository.py by non-deprecated form.

[tox] Remove --ignore in check-manifest check All symlinks have been dropped in previous changesets.

[doc] link to 3.27 (and missing 3.26) pages

[pkg] Version 3.27.0a1

[test] Replace symlinks by real copies This solves a "python setup.py build" issue.

[pkg] Version 3.27.0a0

Merge with 3.26

Added tag debian/3.26.13-1, 3.26.13 for changeset 1fc684253207

[pkg] Version 3.26.13

[test] Replace symlinks in legacy_cubes by real copies This solves a "python setup.py build" issue on my machine. Copying these files should not be a big deal because they have been dropped in the "default" branch and we would not touch them in 3.26 branch.

[pkg] Prune packaging files from sdist

[pkg] Fix spelling mistake in doc-base abstract

[pkg] Fix doc-base section As pointed by Lintian, the “Apps” section is only used in menu, not in doc-base. We can just remove it.

[pkg] Move lintian-overrides file to debian/source directory Just use the now preferred location.

[pkg] Tidy substvars usage in control file The documentation package was missing a Built-Using field to record the provenance of the templates. Empty packages or meta packages do not require Depends on a specific Python version, so we can remove the relevant substvars.

[pkg] Specify priority “optional” instead of the obsolete “extra” Quoting Lintian, “Since Debian Policy version 4.0.1, the priority extra has been deprecated.” So let's use “optional” instead.

[pkg] Switch to Debian source format 3.0 (quilt) This forces us to base the Debian package on the source of the Python package (as produced by running `python3 setup.py sdist`). While it might seem cumbersome, this greatly reduces likelyhood of mismatch between an installation via `pip` and one using the Debian package. `dpkg-source` will also document for us what is currently in the source repository but not in the Python package. Currently the missing file are: PKG-INFO cubicweb/sobjects/test/data/cubicweb_comment/schema.py cubicweb/sobjects/test/data/cubicweb_comment/__init__.py cubicweb/sobjects/test/data/cubicweb_comment/__pkginfo__.py cubicweb/sobjects/test/data/cubicweb_card/schema.py cubicweb/sobjects/test/data/cubicweb_card/entities.py cubicweb/sobjects/test/data/cubicweb_card/__init__.py cubicweb/sobjects/test/data/cubicweb_card/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_comment/schema.py cubicweb/server/test/data-migractions/cubicweb_comment/__init__.py cubicweb/server/test/data-migractions/cubicweb_comment/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_localperms/schema.py cubicweb/server/test/data-migractions/cubicweb_localperms/__init__.py cubicweb/server/test/data-migractions/cubicweb_localperms/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_basket/schema.py cubicweb/server/test/data-migractions/cubicweb_basket/__init__.py cubicweb/server/test/data-migractions/cubicweb_basket/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_tag/schema.py cubicweb/server/test/data-migractions/cubicweb_tag/__init__.py cubicweb/server/test/data-migractions/cubicweb_tag/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_card/schema.py cubicweb/server/test/data-migractions/cubicweb_card/__init__.py cubicweb/server/test/data-migractions/cubicweb_card/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_file/schema.py cubicweb/server/test/data-migractions/cubicweb_file/__init__.py cubicweb/server/test/data-migractions/cubicweb_file/__pkginfo__.py cubicweb/test/data-rewrite/cubicweb_localperms/schema.py cubicweb/test/data-rewrite/cubicweb_localperms/__init__.py cubicweb/test/data-rewrite/cubicweb_localperms/__pkginfo__.py cubicweb/test/data-rewrite/cubicweb_card/schema.py cubicweb/test/data-rewrite/cubicweb_card/entities.py cubicweb/test/data-rewrite/cubicweb_card/__init__.py cubicweb/test/data-rewrite/cubicweb_card/__pkginfo__.py The current manifest will duplicate several files that are stored as symlinks in the Mercurial repository, hence the long list of ignored files in `extend-diff-ignore`.

[debian] Update description of cubicweb-ctl* packages init scripts are no longer shipped. Avoid mentionning "start" and "stop" command which should not be used in production environments.

[debian] Introduce a cubicweb-ctl3 binary package This packages conflicts with cubicweb-ctl binary which uses the python2 library. It is meant to ease upgrade of existing installation during the migration from python2 to python3: in particular, by installing cubicweb-ctl3, scripts calling "cubicweb-ctl" command should still work as before.

[cubicweb-ctl] respect sys.exit status code when aborting a command When exploring the stack of all calls to a cubicweb-ctl command, it has been discovered than on a KeyboardInterrupt and on a SystemExit exception the base class InstanceCommand (for commands that works on one instance) will always set the return code of cubicweb-ctl to 8: this mean that if another command do a `sys.exit(some_code)` the exit code will be ignored and overwritten by '8'. This behavior is not intuitive, apparently not documented and doesn't seems to have any justification. It also prevent commands from exciting with different return codes which could be a desired behavior in the situation of scripting.

[test] Add an "actionverb" attribute to test commands

[test] use self.assertRaises() in cwctl tests

[test] ensure mocking is stopped in cwctl tests Either use a decorator or ensure that cleanup is performed. This is so as to prevent global state modification.

[cubicweb-ctl] add '--pdb' global option to launch (i)pdb on exception

[test] Rename TestCommand to avoid PytestCollectionWarning

[pkg] Add new autopkgtest for skeleton packaging When running `cubicweb-ctl newcube`, the generated template provides debian packaging. So let's add automated tests for that using autopkgtest. The new test will generated a new cube, build a source tarball, build the package, try to install it, see if the Python 2 and 3 modules are available and even run autopkgtest against the newly created packages. Along the way it will also print information about the generated package: buildinfo, package content, and lintian report.

[skeleton] Update Debian packaging template Here are multiple updates to the Debian packaging template provided when running `cubicweb-ctl newcube`: * Switch to source format 3.0 (quilt). * Switch to debhelper 9. * Switch to dh-python. * Add Python 3 packages. * Name the binary packages `python-cubicweb-CUBENAME` and `python3-cubicweb-CUBENAME` instead of just `cubicweb-CUBENAME` (which is still the source package). * Populate Depends using dh_python{2,3} support for Python requirements. * Run test suite at build time using pytest. * Add autopkgtest to run test suite against the installed package. * Bump Standards-Version to 4.3.0.

[test] Use --short-description when testing newcube command

[devtools] Allow to specify short desc on `newcube` command line In order to implement automated testing of `cubicweb-ctl newcube`, we need to avoid any user interaction. So we add a `-s` switch to specify a short description on the command-line instead of requiring an input.

[pkg] Add new autopkgtest for skeleton packaging When running `cubicweb-ctl newcube`, the generated template provides debian packaging. So let's add automated tests for that using autopkgtest. The new test will generated a new cube, build a source tarball, build the package, try to install it, see if the Python 3 module is available and even run autopkgtest against the newly created packages. Along the way it will also print information about the generated package: buildinfo, package content, and lintian report.

[cubicweb-ctl] move to accepting only once instance name per command The rationals behind this decision are: - while in the past managing all instances sytem wide made a lot of sens, pratices have evolved today and we've moved to managing one instance by one - this makes things easier to debug since commands since using them on several instances were making this harder (errors hidden in the middle) - also solve the problem of the return code to have, before it was always 0 which prevented to do things like: ipython --pdb $(which cubicweb-ctl) $command $instance or shell scripts that used it - this simplify the code and is always good to take

[pkg] Run all unit tests in autopkgtest We previously forgot to copy `tox.ini` alongside the tests. As this file configures pytest pattern matching rules, we were not running quite a few tests. This is now fixed. The added tests required some adjustments in the Debian dependencies. Sadly, not all tests currently pass. It seems there are some ordering dependencies between the tests in regards to how data are loaded. Fixing this probably would probably be better debugged by ensuring the test suite does not fail when using pytest random-order plugin.

[pkg] Stop running unit tests from skeleton The test files shipped as part as the skeleton for `cubeweb-ctl newcube` are not meant to be run as part of our test suite!

[tests] Use 16 bytes key when testing Blowfish The version of Cryptodome currently in Debian only accepts Blowfish keys with at least 5 bytes. This is a bug (it should accept 4 as it did before) that has since been fixed upstream: https://github.com/Legrandin/pycryptodome/commit/93912230f3c39e09f4038cb17e301468687c6538 So we work around this issue by using a 16 bytes key instead (which happens to be the minimum recommended length).

Use time.process_time() instead of deprecated clock() This fixes: DeprecationWarning: time.clock has been deprecated in Python 3.3 and will be removed from Python 3.8: use time.perf_counter or time.process_time instead

[web] Make the time separator configurable in JQueryDateTimePicker We add a "separator" argument to JQueryDateTimePicker which will be used when creating the underlying JQueryTimePicker instance so that the user can control how time is displayed by the widget. This is very similar to the "timesteps" argument that's already present.

Added tag 3.26.12, debian/3.26.12-1 for changeset 4531a266f8b2

[pkg] Version 3.26.12

[autoform] Fix display_fields handling This follows-up on changeset b2ceb483e056 (present in 3.25 as well), in which AutomaticEntityForm.editable_attributes() was turned into a generator. In this method, in case display_fields is not None, we previously returned a list of (rtype, role); this was changed into a yield, but the change was missing a return after the loop in order not to go through the remainder of the function. Add tests for editable_attributes() method.

Flake8 cubicweb/web/views/autoform.py Fixes: cubicweb/web/views/autoform.py:703: [E122] continuation line missing indentation or outdented cubicweb/web/views/autoform.py:704: [E122] continuation line missing indentation or outdented cubicweb/web/views/autoform.py:819: [W504] line break after binary operator cubicweb/web/views/autoform.py:820: [E125] continuation line with same indent as next logical line cubicweb/web/views/autoform.py:961: [W504] line break after binary operator cubicweb/web/views/autoform.py:962: [E126] continuation line over-indented for hanging indent

[py3] unicode() -> six.text_type in autoform

Added tag debian/3.26.11-2 for changeset e7eb914df71d

[debian] Release 3.26.11-2

[test] Require pycryptodomex, not pycryptodome This follows up on changeset 5b0ce10a7046.

[debian] Mention Lintian warnings fixes from previous changesets

[debian] Remove unused/redundant entries from debian/cubicweb-ctl.dirs * bash completion entry produces a lintian warning "package-installs-into-obsolete-dir etc/bash_completion.d/", and it does not install bash completion. * doc directory should be handled automatically.

[debian] Make descriptions of python-cubicweb and python3-cubicweb uniform Thus solving lintian warning "description-synopsis-starts-with-article".

[debian] Mention that -postgresql-support binaries are dependency package Fixing lintian warning "empty-binary-package".

[debian] Add ${misc:Depends} where missing Fixes lintian warning "debhelper-but-no-misc-depends".

[debian] Set Section: python for python- binary package This is to fix a Lintian warning.

[debian] Install cubicweb-ctl from python2 build Previously, the binary package was empty. Now it is bound to the python2 package as support for python3 is "fresh". In order python2 and python3 packages to be co-installable, we drop the cubicweb-ctl file from both packages.

[debian] Introduce python3-cubicweb and python3-cubicweb-pyramid binary packages This is the bare minimum to have a working cubicweb on python3. Further work is done in default branch.

[skeleton] Update Debian packaging template Here are multiple updates to the Debian packaging template provided when running `cubicweb-ctl newcube`: * Switch to source format 3.0 (quilt). * Switch to debhelper 9. * Switch to dh-python. * Switch to Python 3. * Name the binary package `python3-cubicweb-CUBENAME` instead of just `cubicweb-CUBENAME` (which is still the source package). * Populate Depends using dh_python3 support for Python requirements. * Run test suite at build time using pytest. * Add autopkgtest to run test suite against the installed package. * Bump Standards-Version to 4.3.0.

[test] Use --short-description when testing newcube command

[devtools] Allow to specify short desc on `newcube` command line In order to implement automated testing of `cubicweb-ctl newcube`, we need to avoid any user interaction. So we add a `-s` switch to specify a short description on the command-line instead of requiring an input.

[pkg] Remove build dependency on dh-systemd As suggested by Lintian, remove build dependency on obsolete package dh-systemd. Instead, specify a more precise version of debhelper 9 that added support for systemd.

[config] Raise in case of failure to send emails when in test mode Since, for some reason, exception log messages are not visible when running tests, it's very hard to debug when sendmails() method fails during tests. So, as in some other places, let's raise the exception when in test mode.

[doc] Update documentation to match current Debian packages

[pkg] Remove transitional packages We can take the opportunity of the switch to Python 3 to get rid of old transitional packages. Let's do it. :)

[pkg] Use sections from requires.txt to populate Recommends and Suggests As Denis Laxalde pointed out, dh_python can also generate Recommends and Suggests from Python package names. So let's use that instead of manually populating these fields in `debian/control`. Optional dependencies are currently specified in `setup.py` grouped by feature. These dependency groups are turned into sections in `requires.txt`. Thankfully `dh_python3` has options to populate Recommends or Suggests with all package from a given section. `debian/rules` now contains a list of which sections should go to Recommends and which section should go to Suggests. Because such extra list easily gets out-of-sync, we add a third list for ignored sections, and ensure that all sections currently in `requires.txt` get a mentioned in `debian/rules`. Here are the results compared to the previous version with explicit Recommends and Suggests (only listing Python packages): |==============================================================| | only in previous | common | only in new | |==============================================================| | Recommends | |--------------------------------------------------------------| | | python3-docutils | | | python3-fyzz | | | | python3-imaging | | | | | python3-pycryptodome | | | | python3-pyramid | | | | python3-pyramid-multiauth | | | python3-pysqlite2 | | | | | python3-rdflib | | | | python3-repoze.lru | | | python3-simpletal | | | | | python3-vobject | | | | python3-waitress | | | python3-werkzeug | | | | | python3-wsgicors | | |--------------------------------------------------------------| | Suggests | |--------------------------------------------------------------| | | | python3-pil | We also lose versioned dependencies which should not really be an issue for Recommends and Suggests.

[crypto] Use Cryptodome namespace instead of Crypto PyCryptodome comes in two flavors: “an almost drop-in replacement for the old PyCrypto library” and “a library independent of the old PyCrypto”. The former uses the Crypto namespace, and is shipped as `pycryptodome` while the latter uses Cryptodome instead and lies in the `pycryptodomex` package. Given the reason to switch to PyCryptodome is that PyCrypto in unmaintained, its probably better to avoid any mistake and mandate the specific usage of the Cryptodome namespace by requiring `pycryptodomex` instead of `pycryptodome`. A more present reason is that Debian buster will only provide a package with the separate namespace flavor. The current Recommends is not working with the current code. Although it's important to note that the package name will probably have to be changed to `python3-pycryptodomex` once https://bugs.debian.org/886291 is solved.

[pkg] Remove python3-six from Build-Depends The default branch only provides support for Python 3.

[pkg] Merge python3-cubicweb-pyramid into python3-cubicweb As suggested by Denis Laxalde, we can merge python3-cubicweb-pyramid into python3-cubicweb as all other web backend in the default branch.

[pkg] Remove explicit Depends on Python packages for python3-cubicweb As suggested by Denis Laxalde, we can let pybuild generate the list of Depends from the egg requirements. The list we get is slightly less specific in terms of needed versions, but given the age of the previous ones, it's unlikely to cause issues. Also we lose python3-six from the list… which is correct as it was removed from the dependencies in 26744ad37953.

[pkg] Fix spelling mistake in doc-base abstract

[pkg] Fix doc-base section As pointed by Lintian, the “Apps” section is only used in menu, not in doc-base. We can just remove it.

[pkg] Use “dependency package” instead of “virtual package” to describe python3-cubicweb-postgresql-support The term “virtual” was too imprecise and is not accepted for empty packages by Lintian anymore.

[pkg] Move lintian-overrides file to debian/source directory Just use the now preferred location.

[pkg] Stop using /etc/bash_completion.d cubicweb-ctl shipped an empty /etc/bash_completion.d as a leftover of shipping a bash completion script. As pointed by Lintian, this directory is not obsolete, so let's get rid of it for good.

[pkg] Tidy substvars usage in control file The documentation package was missing a Built-Using field to record the provenance of the templates. Empty packages or meta packages do not require Depends on a specific Python version, so we can remove the relevant substvars.

[pkg] Specify priority “optional” instead of the obsolete “extra” Quoting Lintian, “Since Debian Policy version 4.0.1, the priority extra has been deprecated.” So let's use “optional” instead.

[pkg] Remove build dependency on dh-systemd As suggested by Lintian, remove build dependency on obsolete package dh-systemd. Instead, specify a more precise version of debhelper 9 that added support for systemd.

[pkg] Run test suite as part of autopkgtest Add support for autopkgtest. The test “unittest” will run the test suite using pytest. As we need PostgreSQL in the test environment and open network connection, the test is marked with `isolation-container` and requires at least LXC to be run, e.g: autopkgtest -s -- lxc -s autopkgtest-sid

[pkg] Switch to Debian source format 3.0 (quilt) This forces us to base the Debian package on the source of the Python package (as produced by running `python3 setup.py sdist`). While it might seem cumbersome, this greatly reduces likelyhood of mismatch between an installation via `pip` and one using the Debian package. `dpkg-source` will also document for us what is currently in the source repository but not in the Python package. Currently the missing file are: PKG-INFO cubicweb/sobjects/test/data/cubicweb_comment/schema.py cubicweb/sobjects/test/data/cubicweb_comment/__init__.py cubicweb/sobjects/test/data/cubicweb_comment/__pkginfo__.py cubicweb/sobjects/test/data/cubicweb_card/schema.py cubicweb/sobjects/test/data/cubicweb_card/entities.py cubicweb/sobjects/test/data/cubicweb_card/__init__.py cubicweb/sobjects/test/data/cubicweb_card/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_comment/schema.py cubicweb/server/test/data-migractions/cubicweb_comment/__init__.py cubicweb/server/test/data-migractions/cubicweb_comment/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_localperms/schema.py cubicweb/server/test/data-migractions/cubicweb_localperms/__init__.py cubicweb/server/test/data-migractions/cubicweb_localperms/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_basket/schema.py cubicweb/server/test/data-migractions/cubicweb_basket/__init__.py cubicweb/server/test/data-migractions/cubicweb_basket/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_tag/schema.py cubicweb/server/test/data-migractions/cubicweb_tag/__init__.py cubicweb/server/test/data-migractions/cubicweb_tag/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_card/schema.py cubicweb/server/test/data-migractions/cubicweb_card/__init__.py cubicweb/server/test/data-migractions/cubicweb_card/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_file/schema.py cubicweb/server/test/data-migractions/cubicweb_file/__init__.py cubicweb/server/test/data-migractions/cubicweb_file/__pkginfo__.py cubicweb/test/data-rewrite/cubicweb_localperms/schema.py cubicweb/test/data-rewrite/cubicweb_localperms/__init__.py cubicweb/test/data-rewrite/cubicweb_localperms/__pkginfo__.py cubicweb/test/data-rewrite/cubicweb_card/schema.py cubicweb/test/data-rewrite/cubicweb_card/entities.py cubicweb/test/data-rewrite/cubicweb_card/__init__.py cubicweb/test/data-rewrite/cubicweb_card/__pkginfo__.py The current manifest will duplicate several files that are stored as symlinks in the Mercurial repository, hence the long list of ignored files in `extend-diff-ignore`.

[pkg] Switch all Debian packages to Python 3

Fix sorting key for rdefs in schema viewer With changeset 234ca3cbbb46, clicking in the schema of an entity with cubicweb in py3 on "vue en boite" will probably result in an infinite spinner (which implies cw > 3.26) What happened ? This "vue en boite" used to work at least until... hg diff -c a8c1ea390400 cubicweb/schema.py @@ -993,10 +992,6 @@ class CubicWebRelationSchema(PermissionM return False return True - @deprecated('use .rdef(subjtype, objtype).role_cardinality(role)') - def cardinality(self, subjtype, objtype, target): - return self.rdef(subjtype, objtype).role_cardinality(target) - class CubicWebSchema(Schema): """set of entities and relations schema defining the possible data sets But, wait ... If I open a shell on an instance of cw 3.24 something seems off >>> list(schema['CWUniqueTogetherConstraint'].relation_definitions())[0][0].cardinality # <bound method CubicWebRelationSchema.wrapped of <constraint_of [CWUniqueTogetherConstraint,CWEType]>> We have been sorting on a method the whole time ? Is it possible what were the effects ? 1) We cannot sort function can't we ? >>> def adder(i): return lambda x: x+i >>> sorted(map(adder,range(10))) [<function __main__.<lambda>>, <function __main__.<lambda>>, ... Yes we can. 2) what does it means. >>> { adder(1) : 1 } Out[19]: {<function __main__.<lambda>>: 1} In fact the function object as a __hash__ method (which is practical for making memoizers (cache)), and return truly random results (pseudo random). My take on this patch is relations have NEVER been sorted by cardinality. No one never ever noticed. Hence, I propose to not fix a bug that never was reported.

Flake8 cubicweb/web/schemaviewer.py

[py3] changing unicode to str py2 support being dropped, passing the code in full py3 str/bytes syntax

[py3] Use sorted(key=...) instead of sorted(cmp=...)

Merge with 3.26

Added tag 3.26.11, debian/3.26.11-1 for changeset 633ca84bea58

[pkg] Version 3.26.11

Added tag debian/3.26.10-1 for changeset 0ce26fb5ab48

[debian] New upstream release

[debian] Drop override_dh_auto_install about cubicweb-ctl The script should be installed normally as it is a setuptools' entry point.

[debian] Remove test/doc Build-Depends We are not actually running tests during package build. (This was disabled for python2, now it is also for python3.) And having these build-depends makes it hard to rebuild the package.

[fix] parse cube version number without space in them

Install patched yapps for test from an http archive Instead of git which require git to be installed. Also downloading archive is faster than cloning the repository.

[server/test] make test filename uniques To avoid these pytest error when collecting the whole test suite: import file mismatch: imported module 'unittest_utils' has this __file__ attribute: cubicweb/cubicweb/server/test/unittest_utils.py which is not the same as the test file we want to collect: cubicweb/cubicweb/test/unittest_utils.py Move cubicweb/server/test/unittest_security.py to cubicweb/server/test/unittest_security.py and cubicweb/test/unittest_utils.py to cubicweb/test/unittest_server_utils.py

Merge 3.26

[dataimport] Fix case when extid is text in use_extid_as_cwuri() Extid can be bytes or text. This avoid AttributeError: 'str' object has no attribute 'decode'

[doc] fix key used in the hook example The hook's regid is check_no_subsidiary_cycle.

[doc] set_operation has been replaced by add_data See the changelog https://cubicweb.readthedocs.io/en/3.26/changes/changelog/#id14

[doc] check_cycle is a standard function

[doc] fix several typos

[pkg] make cubicweb[crypto] depends on pycryptodome instead of pycrypto pycrypto isn't maintained anymore, the last release 2.6.1 is from 2014. Use the drop-in replacement fork pycryptodome instead. pycryptodome is packaged in debian starting from stretch-backports.

[crypto] Encode unicode strings in _cypherer() pycrypto accept both bytes or string but pycryptodome, which will be introduced in next changeset, doesn't accept this. For backward compatibility, encode unicode strings in _cypherer()

[ldapfeed] FIX: Unique Key violation when synchronizing with LDAPfeed What was happening ================== The bug appears when ldapfeed tries to insert a user while another user exists exists with a different source. Simple use case to reproduce: - create a local user in cubicweb (source=system) - sync with ldap - ldapfeed will stop complaining user already exists. Without next patch the test MUST fail with message: cubicweb/server/sources/native.py:714: UniqueTogetherError The ldapfeed is thus stopped ignoring any further ldap entries. The proposal ============ Prior to this patch, the insertion was trying to create all CWUser with the computed login from eeimporter.extid2eid (method process of DataFeedLDAPAdapter). When a CWUser existed with a different cw_source ("system" for user created with cubicweb for instance), it created a conflict. To avoid collisions, in the extentities_generator method a bypass was added at the insertion layer. Prior to insertion the absence of the computed login is checked on a list of all existing login from a different source. If collision is detected, we skip the ldap record. By short circuiting at the CWUser entity insertion level we also avoid to treat CWGroup and EmailAddress related to this user. Hence ensuring a behaviour that will not break existing instances. (conservative approach: faced with ambiguity better do nothing than guess). An error message is added stating explicitly the conflict.

Skip tests for ldapsource with python >= 3.7 Until someone works on fixing these, this should make our CI green again. I tried to use setupModule() to check for python version, but pre_setup_database() is apparently called even when a SkipTest exception is raised there. So handle this in that method. (grafted from 4d68d20427dee4b6751a0f1f5511fec2a04f4782)

Flake8 crypto module

Make crypto module python3-compatible * Remove usage of unicode() and decode the base64-encoded string in encrypt(); * Encode the string received in decrypt() as (I supposed) it should come from the result of encrypt(). Add tests for this module along the way.

[mod] make ViolatedConstraint actually display useful information Move from: (Pdb++) raise some_exception *** ViolatedConstraint: To: (Pdb++) raise some_exception *** ViolatedConstraint: constraint 'cstr56c2ab4b3154f21d08b067742ce5bd9d' is being violated by the query 'ALTER TABLE cw_Bibliography ADD CONSTRAINT cstr56c2ab4b3154f21d08b067742ce5bd9d CHECK(cw_item_type IN ('journalArticle', 'note', 'book', 'thesis', 'film', 'web page', 'manuscrit', 'tapuscrit'))'. You can run the inverted constraint on the database to list the problematic rows. And save hours of debugging to actually understand what is going on.

Fix flake8 errors/warnings about import in cubicweb/_exceptions.py We either ignore errors in case of name re-exports and drop re-exports from old backwards compatibility. We fix the only occurrence of NoSelectableObject being imported from cubicweb in tests and update the import to use lgc instead.

add comment and # noqa on used import

remove unused import

[autopep8] E305 - Expected 2 blank lines after end of function or class

[autopep8] E303 - Remove extra blank lines

[autopep8] E302 - Add missing 2 blank lines

[autopep8] E301 - Add missing blank line

[enh] display CWConstraint type in its repr This will change CWConstraint repr from something like: <Entity CWConstraint 314282 [] at 140127700141904> To: <Entity CWConstraint 314282 of type UniqueConstraint [] at 140127700141904> To help improve debugging UX a little bit.

[entities] display CWConstraint type in its repr

[changelog] document pyramid.ini automatic generation

Flake8 cubicweb/pyramid/test/test_hooks.py

[pyramid/doc] bad docstring

[pyramid/misc] remove useless variable

[pyramid/test] add test for pyramid.ini generation

Added tag 3.26.10 for changeset 74cc5de1ee6c

[pkg] Version 3.26.10

Move CWSchemaTC to RQLExpressionTC The test actually doesn't require a cubicweb schema, except for testing EmailAdress which is out of scope of the test (testing RQLExpression.transform_has_permission()). Just move the test in existing RQLExpressionTC inheriting from TestCase and rename the tests to be more explicit.

[skeleton] Drop py27 tox environment Since we dropped py2 support from cubicweb, it does not make much sense to keep it in skeleton from now on.

[skeleton] Do not ship Debian and RPM packaging files in sdist

[skeleton] Add a check-manifest tox environment

Fix pyramid tests Followup fa292e9 which require cubicweb.session.secret to be set.

Fix flake8 and check-manifest Followup fa292e9

Merge 3.26 This fixes tests with psycopg2

DeprecationWarning: In future versions of Waitress clear_untrusted_proxy_headers will be set to True by default. You may opt-out by setting this value to False, or opt-in explicitly by setting this to True. Source: https://docs.pylonsproject.org/projects/waitress/en/stable/arguments.html?highlight=clear_untrusted_proxy_headers > This tells Waitress to remove any untrusted proxy headers ("Forwarded", > "X-Forwared-For", "X-Forwarded-By", "X-Forwarded-Host", "X-Forwarded-Port", > "X-Forwarded-Proto") not explicitly allowed by trusted_proxy_headers. According to grep we don't use any of those headers so let's turn it on for security reasons.

DeprecationWarning: The default pickle serializer is deprecated as of Pyramid 1.9 and it will be changed to use pyramid.session.JSONSerializer in version 2.0. Explicitly set the serializer to avoid future incompatibilities . See "Upcoming Changes to ISession in Pyramid 2.0" for more information about this change. As describe here https://docs.pylonsproject.org/projects/pyramid/en/1.10-branch/narr/sessions.html#pickle-session-deprecation use a serializer that fallback on pickle if needed to avoid impacting users.

[pyramid/enh] generate pyramid.ini "create" and on "pyramid" command if needed

DeprecationWarning: The SafeConfigParser class has been renamed to ConfigParser in Python 3.2. This alias will be removed in future versions. Use ConfigParser directly instead.

Account for new psycopg2 exception classes mapping From psycopg2 >= 2.8, specific exceptions are raised corresponding to postgresql errors. E.g. a CheckViolation exception is raised instead of a generic IntegrityError previously when a constraint violation occurs. The way we intercept database errors, especially for constraint violation, is not compliant with that because we do not catch subclasses of IntegrityError in native source's doexec() method. We fix this by checking for the presence of IntegrityError error in exception class's mro. This is still overcomplicated and clumsy, because we still use string comparison, but this is the best we can do as far as I know. (A better fix would be 'isinstance(ex, IntegrityError)' but we have no engine-independent error classes, so this is not possible. Something like sqlalchemy's DBAPI Errors [1] might help: https://docs.sqlalchemy.org/en/latest/errors.html#dbapi-errors)

[cubicweb-ctl] remove "cubicweb-ctl wsgi" command following pyramid standardization

Use secure hash algorithm in WebConfiguration.sign_text Fix: PendingDeprecationWarning: HMAC() without an explicit digestmod argument is deprecated. The default hash algorithm used by hmac.new is md5. As of today, md5 is so weak that it's the equivalent of plaintext and can't be considered to be secured at all. Therefor, we switch to a secure hash algorithm. The rational for choosing sha3_512 is: * the recommended algorithm is at least sha_256 * the stronger, the more secured and sha3_512 is the stronger available * thinking about the future this should keep this part of the code safe long enough before people think about checking it again You can read more about choosing a secure hash algorithm in the NIST recommendations https://csrc.nist.gov/Projects/Hash-Functions/NIST-Policy-on-Hash-Functions This code modification should normally be transparent since check_text_sign is exactly this code 'self.sign_text(text) == signature' and that sign_text is only used in combination with it. The only impact is that the hash is going to move from 32 char to 128 which might make html page a bit bigger and that sha3_512 is slow to compute (which is a good thing for security)

[enh] don't catch all exceptions in notification hooks during tests

[doc] add a reference to static-messages.pot usage

[doc] Clarify sentences

[doc] Fix format and typo

Fix DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated

Fix DeprecationWarning: invalid escape sequence

[devtools/testlib] avoid hidding AttributeError in create_user() commit() might raise a AttributeError too. Use getattr(req, 'cnx', req) instead, which is a form already used to get the real cnx in some code: cubicweb/rset.py:577: cnx = getattr(self.req, 'cnx', self.req) cubicweb/schema.py:353: with getattr(_cw, 'cnx', _cw).security_enabled(read=False): We could use if hasattr(req, 'commit') here too but it lead to 3 additionals lines. Maybe we should have commit() and rollback() on cubicweb.web.request.ConnectionCubicWebRequestBase too ?

Fix DeprecationWarning: invalid escape sequence \

DeprecationWarning: The 'warn' method is deprecated, use 'warning' instead

[mod] remove backward compatible code for passlib and force modern version

DeprecationWarning: Please use assertEqual instead.

DeprecationWarning: Please use assertRaisesRegex instead.

DeprecationWarning: inspect.getargspec() is deprecated since Python 3.0, use inspect.signature() or inspect.getfullargspec()

[README] add testing instructions

Add pytest-subtests to dev requirements This pytest plugin adds support for unittest's TestCase.subTest (for Python >= 3.4). Since we we now only support python3 and since we use a fair amount of these, let's benefit of better reporting by using this plugin.

[test] use unittest.mock instead of mock library Now that we use Python 3 only, this is possible.

Drop python2 support This mostly consists in removing the dependency on "six" and updating the code to use only Python3 idioms. Notice that we previously used TemporaryDirectory from cubicweb.devtools.testlib for compatibility with Python2. We now directly import it from tempfile.

Merge with 3.26

Remove unused imports in cubicweb.pyramid.config

Added tag 3.26.9 for changeset 4d6909de765a

[pkg] Version 3.26.9

[pyramid/security] use cryptographically secure random generator Based on django source code in case SystemRandom is not available. According to python documentation: https://docs.python.org/2/library/random.html > Warning > The pseudo-random generators of this module should not be used for security > purposes. Use os.urandom() or SystemRandom if you require a cryptographically > secure pseudo-random number generator.

Reclosing branch after merge

Merging heads of old, closed branch

Reclosing branch after merge

Merging heads of old, closed branch

[doc/changes] document that legacy cube support has been dropped

[doc] replace legacy import to new style cube import in various places

[web/views] drop deprecated module cubicweb.web.views.timeline

[web/views] drop deprecated module cubicweb.web.views.massmailing

[web/views] drop deprecated module cubicweb.web.views.isioc

[web/views] drop deprecated module cubicweb.web.views.embedding

[web/views] drop deprecated module cubicweb.web.views.igeocodable

[pyramid/core] drop fallback import of legacy cubes

[cwconfig] drop importing legacy cubes This finally drop support for legacy cubes. In cwconfig, don't load modules in the "cubes" namespace. In cube_pkginfo() handle CW_MIGRATION_MAP which wasn't working with new style cube. Drop all method specific to legacy cubes importer: cubes_search_path(), extrapath(), cls_adjust_sys_path() Drop environment variables related to legacy cubes: CW_CUBES_PATH and CW_CUBES_DIR

[doc] better documentation for "cubicweb-ctl newcube" cubicweb-ctl newcube create cubicweb-<name> in current directory.

[test] make unittest_cwconfig.py does not depend on legacy cube machinery By dropping legacy cube tests in various places.

[devtools/test] drop legacy cube i18n tests test_i18ncube_legacy_layout() is droped and make others tests uses a new style cube "cubicweb_i18ntestcube", so it doesn't depends on legacy cube machinery.

[server/test] make unittest_migractions.py use new style cubes MigrationTC used old cube layout in cubicweb/server/test/data-migractions/cubes, move them to new style cubes as "cubicweb_<cubename>" in "apphome" (cubicweb/server/test/data-migractions/) which is added to PYTHONPATH by CubicWebTC.

[cwconfig] drop _cube_modname Since we drop support for legacy cubes, this is equivalent to _cube_pkgname()

[cwconfig] drop legacy cube importer We don't want to support legacy cubes anymore.

Drop more deprecated code This follows up on changeset a8c1ea390400, in which code deprecated using logilab.common.deprecation got dropped. Now we also drop code deprecated using stdlib's warn(<msg>, DeprecationWarning). Notice that, as a consequence of dropping old/new etypes aliases in cubicweb/schema.py, we drop the import ETYPE_NAME_MAP (no longer needed); but since other modules imported that name from cubicweb.schema, we need to update the import statement to use "cubicweb" directly.

Flake8 cubicweb/cwvreg.py

Drop deprecated "boxes" and "contentnavigation" registries

Drop deprecated CWCache entity type

Update i18n after "recent" changes

Drop repair_file_1-9_migration.py

Drop a left-over 3.22 deprecation warning

[doc] fix reference to ~src/cubes in tutorial ~src/cubes refer to the $HOME/cubes directory of "src" user while ~/src/cubes refer to $HOME/src/cubes directory of current user.

[doc] replace cubicweb-ctl start by cubicweb-ctl pyramid Since twisted support is gone.

[doc] make the tutorial use a python3 virtualenv

[doc] Update README "Getting started" * install using pip and with pyramid in a virtualenv * link to pyramid.ini documentation * Use pyramid to start application since twisted support is gone

Flake8 cubicweb/devtools/httptest.py

Remove Twisted web server Twisted web server is not used anymore and has been superseded by pyramid many years ago. Furthermore, our usage is not compatible with Python 3. So we drop the "etwist" sub-package. As a consequence, "all-in-one" configuration type gets dropped as it was Twisted-specific. We resurrect it in cubicweb/pyramid/config.py by only keeping options used by the "pyramid". Similarly, we introduce a AllInOneCreateHandler in cubicweb/pyramid/pyramidctl.py that is basically the one that lived in cubicweb/etwist/twctl.py and is used to create the "all-in-one" instance. Added a TODO here about "pyramid.ini" that could be generated at the end of bootstrap() method. In cubicweb/devtools/httptest.py, CubicWebServerTC is now equivalent to CubicWebWsgiTC and the latter is dropped.

Separate twisted-specific configuration from WebConfigurationBase class This is in preparation of dropping the Twisted web server backend. We thus draw a clearer line between what's specific to twisted from what's generic by moving WebConfigurationBase class into cubicweb/web/webconfig.py and only keeping twisted-related in AllInOneConfiguration (still living in cubicweb/etwist/twconfig.py).

Flake8 cubicweb/web/webconfig.py

Flake8 cubicweb/etwist/twconfig.py

Remove ctl commands using the Twisted backend This backend is not maintained, very likely no longer used in any recent instance, and not supported in Python 3.

Flake8 cubicweb/cwctl.py * run autopep8 on the file * fixed unused imports * rename "version" import as "cw_version" in order not to shadow local variables

Remove _handle_win32() method from "create" command class This method generates code in a file using etwist module that we are about to drop.

Skip tests for ldapsource with python >= 3.7 Until someone works on fixing these, this should make our CI green again. I tried to use setupModule() to check for python version, but pre_setup_database() is apparently called even when a SkipTest exception is raised there. So handle this in that method.

[doc] Update cubicweb-ctl page about how to run an instance * remove mention of start/stop/restart/status commands that do not exist anymore * briefly mention the "pyramid" and point to respective documentation page * mention that a WSGI server should be used in production

[doc] Drop mention of the "pyramid" cube This cube got merged into cubicweb several versions ago.

[cli/enh] on 'shell' or migration command, use ipython if available

[web/test] drop dependency on third party cubes Drop dependency on cubicweb-file, cubicweb-blog and cubicweb-tag for cubicweb/web/test Copy required parts of cubes (schema, entities, views and hooks) into cubicweb/web/test/data/cubicweb-<cube> that make tests pass.

[test] drop dependency on third party cubes Drop dependency on cubicweb-file, cubicweb-localperms, cubicweb-tag and cubicweb-comment for cubicweb.test and cubicweb.sobjects.test Move cubicweb/test/data/libpython/cubicweb_* to cubicweb/test/data, so it's included in PYTHONPATH. Add missing parts of schema, entities, views, hooks that make tests pass.

[test] drop CubicWebConfigurationWithLegacyCubesTC This is used to test legacy cube import which is planned for removal in cubicweb 3.27, so drop the code.

[test] drop unittest_cubes.py This is used to test legacy cube import which is planned for removal in cubicweb 3.27, so drop the code.

[server/test] do not depend on third party cubes Drop requirement of basket, card, comment, file, localperms and tag cubes for cubicweb.server tests. Copy needed part of schema, entities, views, hooks into the cubicweb/server/test/data directory (which is included in PYTHONPATH for CubicWebTC tests). For migration tests which use different "datapath", use symlinks to have dependent cubes importables.

[server/test] drop unused variable initialization in OperationsTC.setUp() Variable "self.hm" is unused

[server/test] bootstrap config in setUpModule function This is test initialization, so use the setUpModule function for this

[schema] drop monkeypatch "name_for" on BaseConstraint BaseConstraint doesn't have "name_for" method, this is just an addition for cubicweb needs. Implement this as a function instead of a monkeypatch to avoid having "name_for" not defined because cubicweb.schema hasn't been imported. In particular this fix running cubicweb/server/test/unittest_schema2sql.py::SQLSchemaTC::test_known_values alone.

[fix] this check was too restrictive and broke tests

[fix] exception type has changed

[server.rqlannotation] refactor to make class SQLGenAnnotator consistent _annotate_select() takes SQLGenAnnotator as a first argument and is not used anywhere except in SQLGenAnnotator. This looks like a method to me. Let us fold it into its class.

Drop most of deprecated code As in previous changesets, most code has been deprecated since a very long time. This changeset concerns "core" cubicweb modules (e.g. "server", "appobjects") for which it's not easy to handle change atomically. In cubicweb/server/querier.py, we adjust empty_rset() function as a result of "rqlst" argument of ResultSet being dropped. (There was no use of the keyword argument anyways.)

Drop deprecated code in cubicweb.hooks Changelog entry will come in a later changeset.

Drop deprecated code in cubicweb.entities Also dropped an unused import along the way. Changelog entry will come in a later changeset.

Drop deprecated code in cubicweb.devtools Changelog entry will come in a later changeset.

Drop deprecated code in cubicweb.dataimport We actually drop *most* of deprecated code in this subpackage. What's left is the MetaGenerator class in (cubicweb/dataimport/stores.py) which is tricky to remove as it's still internally used by cubicweb. Changelog entry will come in a later changeset.

Drop most deprecated code in cubicweb.web This includes both Python and JavaScript code. Most code has been deprecated since a very long time (versions 3.1x mostly, more than 5 years ago, and a few things until 3.24). There are still a few deprecated things, most of which are actually used within cubicweb (or in cubes we depend on for tests). I don't know what to do with these... Removed a couple of unused imports along the way. Changelog entry will come in a later changeset.

[web] use Separator "component" instead of deprecated BoxSeparator widget

Flake8 cubicweb/web/box.py

[test] Remove upper bound for cubicweb-localperms Version 0.4.0 does not use a deprecated API that we are planning to drop in forthcoming changesets. This requires changing expected values in unittest_cwconfig.py where we scan install cubes. * In CubicWebConfigurationTC.test_available_cubes(), localperms disappears from the list of expected cubes because this test method will look for new style cubes in located in cubicweb/test/data/libpython/ (we patch pkg_resources.iter_entry_points()) as well as old style cubes installed in $PREFIX/share/cubicweb/cubes; since the new cubicweb-localperms version is new-style, it won't be catched by this method. * In CubicWebConfigurationWithLegacyCubesTC.test_available_cubes(), localperms is still listed, but now with the package name, because this method will simply look at installed cubes whether old or new style.

[test] Make the expected value explicit in CubicWebConfigurationWithLegacyCubesTC.test_available_cubes() This will help with the next changeset, and avoiding computation in tests is a good thing in general.

[test] Inline _test_available_cubes() method in cwconfig tests Improves readability.

[DX] adding error messages to {ResultSet,ActionsRegistry}.possible_actions Try to make it more accessible, when we first encountered these errors it it didn't made any sense to us.

[server/querier] remove useless indirection QuerierHelper._annotate

[server] remove useless indirection ExecutionPlan.sqlannotate Simpler is better. Use directly ExecutionPlan.querier.sqlgen_annotate.

[web] removed unused imports in basecomponents

[test] Depends on psycopg2-binary Avoids the following warning: The psycopg2 wheel package will be renamed from release 2.8; in order to keep installing from binary please use "pip install psycopg2-binary" instead. For details see: <http://initd.org/psycopg/docs/install.html#binary-install-from-pypi

[doc/changelog] the removal of next_tabindex produce an error not in the changelog When one tried to migrate to 3.25, the error "class X initialization doesn't have a settabindex argument" can happen but the word "settabindex" is not present in the changelog which makes it hard to find to which modification this error is related.

Merge with branch 3.26

[py3.7,test] Use cubicweb-file >= 2.2.2 This includes changeset aa4a3a3d0c18 fixing import of os.errno.

[flake8] Fix errors in cubicweb/ext/test/unittest_rest.py

[test] Shorten prefix string in test_rql_role_with_unknown_vid With Python3.7, this test fails as the error message returned by rest_publish() is: <p>an error occurred while interpreting this rql directive: ObjectNotFound('toto')</p> while we previously assumed a comma after 'toto'. Fixing this by only shortening the prefix used in out.startswith().

[flake8] fix errors in cubicweb_i18ntestcube/views.py test file

[test] Pass __module__ upon instantiation of RegistrableInstance This gets rid of the deprecation warning from logilab.common.registry: DeprecationWarning: instantiate MyAFS with __module__=__name__ and solves a test error on Python 3.7.

Added tag 3.26.8 for changeset 91f75319a726

[pkg] Version 3.26.8

[doc] didn't had any questions

[doc] missing import, cw now require this explicitely

[doc] add actual link to previous post

[doc] missing import in code example

[doc] add a note because uiprops.py is not generated anymore by default

[doc] recommend pip instead of apt for installing things According to a discussion on XMPP we should recommend pip instead.

[doc] fix, link to internal doc since it's not the blog post anymore

[doc] also show command with sqlite since it's recommended

[doc] fix, the cube name was used, it was the instance named that was needed

[doc] it's a tutorial, not a blog post anymore

[doc] make example more redable

[doc] uses :file:`name` everywhere + indicate file when it's not present

[doc] english typos

[doc] pep8/retab in code examples

[doc] correct import for i18n

[doc] pep8 and retab in tutorial code example

[doc] correct pip command to have needed dependancies to use the start command I know we want to remove this command but in the meantime having this documentation working seems like something good.

[doc] explain the difference between a relation and an attribute

[doc] plural

[doc] misc, put every reference to something in the code between backquotes

[doc] bold to make reading more obvious

[doc] style, switch to bullet points list to make things easier to read