Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 02 May 2013 12:22:14 +0200] rev 8987
[doc] a couple almost-typos
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 03 May 2013 17:26:23 +0200] rev 8986
[schemaserial] mitigate critical message during migration
We can't fetch extra_props because it is not yet there.
Dimitri Papadopoulos <dimitri.papadopoulos@cea.fr> [Wed, 22 May 2013 06:30:16 +0200] rev 8985
[doc] typo
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Thu, 23 May 2013 18:57:25 +0200] rev 8984
[cw-ctl] fix help message for schemadiff In global help (closes #2888538)
The leading space make it appears on multiple line. The help content is a bit
improved in the process.
Julien Cristau <julien.cristau@logilab.fr> [Tue, 14 May 2013 18:02:24 +0200] rev 8983
[dbapi] fix connect backwards compat harder
Passing None as group and host should result in
"pyro:///cubicweb.appid", not "pyro://None/None.appid". Followup for
2091d275fe5c. Closes #2882666.
Julien Cristau <julien.cristau@logilab.fr> [Thu, 23 May 2013 12:35:02 +0200] rev 8982
[zmq] make publish address optional
It should be possible to use the zmq communication bus in a read-only
manner. Allow setting zmq-address-sub without zmq-address-pub.
Closes #2897178.
Julien Cristau <julien.cristau@logilab.fr> [Thu, 23 May 2013 14:38:43 +0200] rev 8981
Fix documentation for zmq pub/sub hooks and configuration
Closes #2897177
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Fri, 17 May 2013 16:25:48 +0200] rev 8980
[entity] improve deprecation messages
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 May 2013 14:42:50 +0200] rev 8979
[devtools] use self._parse so AssertionError is properly raised instead of lxml error (test failure introduced in 6711f78c18be)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 May 2013 16:21:23 +0200] rev 8978
[testlib] fix page validator selection. Closes #2869456
* use a validator that checks XML well-formness for the html5 doctype
(as a convenient side-effect, it does not choke on e.g. a canvas tag
like the HTMLParser does)
* use a DTD validator if there is an xml declaration
* else use the HTMLValidator
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 May 2013 14:22:51 +0200] rev 8977
[testlib] introduce a validator that check xml-well formness
This validator simply check XML is well formed and accept any entities
(think HTML defines much more entities than bare XML)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 May 2013 15:37:22 +0200] rev 8976
[view] return HTML5 doctype. Closes #2869426
We dropped xhtml support in 3.17 but we kept providing documents using the
XHTML strict doctype, while our content wasn't conform to the DTD since we
dropped proper namespaces definition as well as declaration of cubicweb DTD
extensions.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 06 May 2013 17:16:45 +0200] rev 8975
[testlib] repreprocess content so contextual display has a chance to show the proper line. Closes #2869481
the context is calculated using position information relative to a preprocessed content,
not the original source
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 06 May 2013 15:58:52 +0200] rev 8974
[web request] drop no more necessary request.document_surrounding_div method
This is awful and no more necessary since we dropped xhtml support
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 06 May 2013 17:13:43 +0200] rev 8973
[testlib] unspaghettify Validator / PageInfo api
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 06 May 2013 16:05:51 +0200] rev 8972
[testlib] update htmlparsers.VALMAP: stop using SaxOnlyValidator and add an entry for html
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 06 May 2013 17:26:16 +0200] rev 8971
[testlib] SaxOnlyValidator is deprecated, use XMLValidator instead
Dimitri Papadopoulos <dimitri.papadopoulos@cea.fr> [Tue, 14 May 2013 15:26:24 +0200] rev 8970
[dataimport] minor typo in error handling
Dimitri Papadopoulos <dimitri.papadopoulos@cea.fr> [Tue, 07 May 2013 00:29:42 +0200] rev 8969
[views] attempt to clarify the inline help system documentation
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 06 May 2013 19:40:15 +0200] rev 8968
[sobject] fix notification operation
regression introduced in bf4003760e02 Operation use self. session. not self._cw.
I'm a bit surprised that its not tested.
closes ##2870077
David Douard <david.douard@logilab.fr> [Fri, 03 May 2013 16:36:42 +0200] rev 8967
Added tag cubicweb-debian-version-3.17.0-2 for changeset 09a0c7ea6c3c
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 03 May 2013 16:27:34 +0200] rev 8966
[pkg/debian] prepare release 3.17.0-2
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 03 May 2013 16:24:42 +0200] rev 8965
[pkg/debian] update yams runtime depends
Only the built depends were updated to 0.37.0.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 03 May 2013 16:23:08 +0200] rev 8964
[pkg/debian] expand all depends and co on multiple line
This is more readable and simplifies patching.
David Douard <david.douard@logilab.fr> [Thu, 02 May 2013 17:14:22 +0200] rev 8963
Added tag cubicweb-debian-version-3.17.0-1 for changeset 22be40c492e9
David Douard <david.douard@logilab.fr> [Thu, 02 May 2013 17:14:21 +0200] rev 8962
Added tag cubicweb-version-3.17.0 for changeset cc1a0aad580c
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 02 May 2013 15:58:57 +0200] rev 8961
[test/view] exclude some Blog entity from automatic view testing
Some Blog view requires the sioc cubes that we extracted in 3.17
we do not really want to test cubes view here. So we exclude
CWEtype
that really requires the sioc cubes.
David Douard <david.douard@logilab.fr> [Thu, 02 May 2013 14:30:36 +0200] rev 8960
[doc] fix: cubicweb.gmap.js has moved to the geocoding cube
David Douard <david.douard@logilab.fr> [Tue, 30 Apr 2013 08:17:10 +0200] rev 8959
[test/ldap] do not assume order
Do no assume a specific order is stable when testing group members
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 29 Apr 2013 14:49:43 +0200] rev 8958
Added tags for version 3.16.4 on changeset 041804bc48e9
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 29 Apr 2013 12:34:23 +0200] rev 8957
[notification] ensure official API is test
By using the official API in the hook we ensure it is tested.
Alain Leufroy <alain.leufroy@logilab.fr> [Mon, 29 Apr 2013 09:47:23 +0200] rev 8956
fix typo in notification causing NameError
introduced by: f5b40b66d36e
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 29 Apr 2013 12:29:59 +0200] rev 8955
[test/notification] merge related test classe
They have no reason to be distinct.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 29 Apr 2013 11:43:36 +0200] rev 8954
merge with stable
Julien Cristau <julien.cristau@logilab.fr> [Tue, 16 Apr 2013 16:51:18 +0200] rev 8953
[server] add a looping task to free unused cnxsets capture by dead pyro
When a pyro client disconnects, we're not necessarily notified so they
can hang on to their session/cnxset forever. Don't let them do that.
The hacky looping task is only installed when pyro is enabled. This optional
activation save this very hacky patch from being rejected.
closes #2825380
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 29 Apr 2013 11:22:21 +0200] rev 8952
[pkg/debian] update changelog to 3.17.0
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 29 Apr 2013 11:06:28 +0200] rev 8951
[devtools] Use XMLValidator instead deprecated SaxOnlyValidator
The renaming was introduced in 198fdadafed6.o
This prevent a meta class conflict introduced by logilab-common 0fcd2e050621.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 26 Apr 2013 18:47:36 +0200] rev 8950
[pkg] update changelog
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 26 Apr 2013 18:37:47 +0200] rev 8949
[pkg] prepare 3.17.0
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 26 Apr 2013 18:21:18 +0200] rev 8948
[pkg] prepare 3.16.4
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 26 Apr 2013 18:06:44 +0200] rev 8947
[repo] straightforward bootstrap sequence. Closes #2841188
* kill fill_schema method which was doing to much different things, in favor of
a deserialize_method which is simply reading schema from the db and returning
it
* set_schema doesn't bother with cubes
This allows to easilly follow what's going on and so to cleanup init_cnxset_pool
to get the following boostrap order:
1. load cubes (implies loading site_cubicweb)
2. load schema
3. init data sources
4. init cnx sets
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 24 Apr 2013 14:49:49 +0200] rev 8946
[repo] minor cleanups to bootstrap sequence
* fix some docstring/comments
* move initialization of HooksManager to the __init__.py, this has nothing to
do with pool initialization / boostraping
Vincent Michel <vincent.michel@logilab.fr> [Fri, 26 Apr 2013 17:46:56 +0200] rev 8945
[schemaserial] serialize additional yams parameter for customs type
Yams have a new custom type feature. We add support for extra parameter on
CWAttribute in schema serialization handling.
Closes #2847151
Vincent Michel <vincent.michel@logilab.fr> [Tue, 23 Apr 2013 14:13:58 +0200] rev 8944
[sql] preprocess_entity uses lgdb helper's SQL converters.
The preprocess_entity does not yield anymore the conversion logic for different
base types, but relies on a new SQL_CONVERTERS dictionary of the db helper.
This will allow later inclusion of new base types.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 24 Apr 2013 14:42:43 +0200] rev 8943
[repo] kill rebuildinfered feature from Repository.set_schema
This clutters thing and is useless in most cases: when schema just have been
readen from the database or from the file-system, infered relations have just
be calculated.
The only use-case where it should be rebuilt is on migration (ie schema
modification by editing the meta-model using rql), so move this feature there.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 24 Apr 2013 14:51:06 +0200] rev 8942
[test] stop deepcopying for nothing
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 26 Apr 2013 12:10:37 +0200] rev 8941
drop xhtml content-type support (closes #2065651)
* HTMLStream does not care about xml any more
* reqquest.demote_to_html and .xhtml_browser are deprecated
* web config: drop force-html-content-type option
* adjust tests
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 26 Apr 2013 11:53:47 +0200] rev 8940
[htmlparser] exclude <script> tag from html source
lxml are confused by them :-(
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 26 Apr 2013 11:52:35 +0200] rev 8939
[htmlparser] store unaltered source in pageinfo.source
Do not store the parser to preserve the source aspect. Store the initial input
in the source argument instead.
This is very useful when parsing html. In such case we need to drop ``<script>``
tag.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 25 Apr 2013 18:38:47 +0200] rev 8938
[htmlparser] rename SaxOnlyValidator to XMLValidator
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 25 Apr 2013 17:46:28 +0200] rev 8937
[htmlparser] add missing deprecation message
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 25 Apr 2013 16:55:12 +0200] rev 8936
[form] remove hard coded id
html id should be unique. It is clearly not achieved here.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 26 Apr 2013 11:08:06 +0200] rev 8935
[server/test] use server config in migration
This allows a lighter initialisation (no rtag needed).
Execution of those test move from 300 secondes to 220 seconds here. A 25%
speedup
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 22 Apr 2013 17:57:46 +0200] rev 8934
[session] deprecate `hijack_user` method
The semantic of this method is wicked and lead to very hard violation of sanity.
(multiple transaction using the very same cursors). We deprecated the API to be
able to drop it as soon as possible.
The method was added long ago for some notification trick. It is not needed
since we sent notification on ``postcommit_event``.
(closes #2781782)
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 25 Apr 2013 12:24:26 +0200] rev 8933
[mail] drop hijack_user usage
The transaction is now commited before notification. We can create a new session
directly and drop `hijack_user` usage.
This prepare #2781782
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 25 Apr 2013 13:35:02 +0200] rev 8932
[notification] merge BaseNotificationView and NotificationView
They are in the same module now.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 25 Apr 2013 13:34:48 +0200] rev 8931
[notification] move notification view in ``sobject.notification``
It has no user outside this module. This enforce serversideness of
notification and allow future cleanup.
No backward compat is set up to prevent circular import. The class has no other user
anyway.
(closes 2845144)
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 25 Apr 2013 14:10:55 +0200] rev 8930
remove unused import
pyflakes say they are unused. Tests suite confirms.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 25 Apr 2013 17:30:09 +0200] rev 8929
one more merge
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 25 Apr 2013 16:10:56 +0200] rev 8928
[notification] introduce an official `notify_on_commit` function
It provides a proper notification api instead of replacing it by yet another
clumsy one.
Closes #2837251
Vladimir Popescu <vladimir.popescu@logilab.fr> [Thu, 25 Apr 2013 10:57:01 +0200] rev 8927
[cubicweb/doc] Replace dc_type() by cw_etype
dc_type() is may be translated. Leading to terrible terrible damage.
Vladimir Popescu <vladimir.popescu@logilab.fr> [Thu, 04 Apr 2013 11:58:41 +0200] rev 8926
[dataimport] backout 6947201033be (related to #2788402)
(and add a try: except to cache the intended error)
The problem actually comes from the ``MassiveObjectStore``
in the ``dataio`` cube, so it should be corrected there.
Here, we only protect it with a ``RuntimeWarning`` so that
the user can see the problem.
``value`` is set to ``None`` (whence to ``NULL`` from
a database standpoint), so that the data can be nevertheless
inserted in the database. However, only the keys present in
``row`` are actually non-'``NULL``'.
The real solution is to work out the issue in ``MassiveObjectStore``
directly.
The current try/except should only be a temporary hack.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 25 Apr 2013 15:45:38 +0200] rev 8925
merge default heads
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 05 Apr 2013 14:44:03 +0200] rev 8924
[c-c serverctl] import locally to speed up c-c
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 25 Apr 2013 12:12:15 +0200] rev 8923
[facet js] minor refactoring and cleanups
* extract facetCheckBoxSelect and facetCheckBoxUnselect
* use $ as prefix for jQuery variable (facet -> $facet)
* other minor rephrasing
David Douard <david.douard@logilab.fr> [Wed, 24 Apr 2013 18:11:37 +0200] rev 8922
[ldapfeed] Add support for LDAP groups (closes #2528116)
Groups from the LDAP server are imported as CWGourp entities, and in_group relationships are created between existing CWUsers and CWGroups
Unit tests have been refactored a bit, especially ti add helper methods to manage LDAP database.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 24 Apr 2013 17:57:14 +0200] rev 8921
[test/ldap] small improvement to ldapfeed unit tests
better group testing and further testing of imported user life cycle.
David Douard <david.douard@logilab.fr> [Wed, 24 Apr 2013 17:48:08 +0200] rev 8920
[ldap] prepare import of CWGroup
All CWUser specific code is put in dedicated sections.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 24 Apr 2013 17:40:49 +0200] rev 8919
[ldap] handle modification date
We are now able to import modification date from ldap.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 24 Apr 2013 17:39:10 +0200] rev 8918
[ldap] refactor attributes mapping handling
* use explicit attributes lists when calling ldap search
* direct and reverse attributes maps contains now the same elements.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 24 Apr 2013 14:00:52 +0200] rev 8917
[ldapfeed] add support for multiple email addresses from ldap
Multiple emails case was ignored before this change.
email test
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 24 Apr 2013 15:37:43 +0200] rev 8916
merge 3.16.x fix in 3.17.x branch
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 24 Apr 2013 15:33:49 +0200] rev 8915
[session] fix hooks_control backward compat
Session object have no ``hooks_control`` control method. it has
``allow_all_hooks_but`` and ``deny_all_hooks_but`` ones.
Regression introduced in bd5b5759c9b3.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 19 Apr 2013 16:25:45 +0200] rev 8914
[facet js] fix reordering of facet check boxes. Closes #2732947
Before this patch, when one select an element, it's moved to the top of
the select content. Fine. But when it's later deselected, it stays there
instead of moving back to its original location.
This patch fixes that by introducing a facetCheckBoxReorder function which
properly reorder the whole facet, instead of buggy attempt to locally reorder.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 24 Apr 2013 14:40:09 +0200] rev 8913
[vreg] (re)build entity classes cache after registry initialization.
This fix potential memory fragmentation issue.
Closes #2719113
Julien Cristau <julien.cristau@logilab.fr> [Wed, 24 Apr 2013 12:10:12 +0200] rev 8912
[task] allow negative intervals for add_looping_task (closes #2818280)
Instead of rejecting values < 0 with a ValueError, we ignore tasks with
a negative interval. This introduce a simple way to disable task from
configuration.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 24 Apr 2013 11:58:49 +0200] rev 8911
[task] allow interval=0 for looping tasks
There is valid usecase for perpetual running task.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 24 Apr 2013 14:45:13 +0200] rev 8910
[portable dump] skip virtual relations, they have no table associated. Closes #2841199
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 24 Apr 2013 14:37:48 +0200] rev 8909
[test] fix skipIf import, currently failing if unittest2 is not there
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 24 Apr 2013 14:36:41 +0200] rev 8908
[test] fix bad merge
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 23 Apr 2013 18:15:10 +0200] rev 8907
merge with other default head
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 23 Apr 2013 16:07:02 +0200] rev 8906
[ldap] an empty 'user-base-dn' disable the user importation process,
The same semantic will be used for group. We start by using it for user for the
sake of consistency.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 23 Apr 2013 15:46:09 +0200] rev 8905
drop commented print
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 23 Apr 2013 16:50:18 +0200] rev 8904
[ldap] Major test refactoring
Mostly fix tests (previous refactoring), but also refactor a bit the base class
to have better/simpler interaction with the slapd server.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 23 Apr 2013 17:58:20 +0200] rev 8903
[test/ldap] have RQL2LDAPFilterTC use its own database
I do not know what RQL2LDAPFilterTC is about and why it does this strange reuse
of LDAPUserSourceTC pre_setup_database but it is certainly a good idea to have it
use a dedicated database-cache.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 23 Apr 2013 16:25:56 +0200] rev 8902
[ldap] quieter tests
Capture slapadd and slapd output if everything goes well.
Jérôme Roy [Wed, 10 Apr 2013 17:50:11 +0200] rev 8901
[test/ldap source] better source naming, some cleanups (prepares #2528116)
ldap uri becomes "ldap" in all cases
prepare separation of CONFIGs by source type
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 23 Apr 2013 15:33:50 +0200] rev 8900
use cw_etype instead of __regid__
We have a clean public API now.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 23 Apr 2013 15:16:36 +0200] rev 8899
[entity] add an official ``cw_etype`` property for entity
This property holds the CWEtype id of the entity. This information was previously
available through __regid__ but this is an ugly public API. So we have a new
clean public API. The ``dc_type()`` method could not be used as it is
translated.
(closes #2793792)
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 23 Apr 2013 12:38:27 +0200] rev 8898
[notification] use new style operation for notification
This results in far less operations created. Operation creation is expensive.
We keep some compatibility with the previous API because some cubes have been
reported to use it.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 22 Apr 2013 17:16:02 +0200] rev 8897
[cleanup] drop code deprecated since 3.6
The 3.6 API have been dropped some time ago. Those three lines survived the
purge. One of them is even deprecated since 3.5.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 22 Apr 2013 15:25:04 +0200] rev 8896
[notification] fix documentation
The doc say precommit, the code says postcommit. The code is right.
We also clarify the documentation of another related operation looking suspiciously
wrong but actually correct.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 23 Apr 2013 12:01:14 +0200] rev 8895
[ldapuser] Deprecated the source
We have ldapfeed for some time. maintaining both is cumbersome. This old style
source will be dropped in 3.18.
closes #2567712
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 19 Apr 2013 15:44:42 +0200] rev 8894
[rql2sql] Remove an XXX by explaining why Int non-substitution is desired
(in the current state of the API)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 19 Apr 2013 15:41:56 +0200] rev 8893
[rql2sql] Boolean values should be substitued like others. Closes #2829481
Furthermore lgdb 1.10 deprecate boolean_value method and this simplify
testing.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Mon, 22 Apr 2013 14:54:22 +0200] rev 8892
[toward-py3k] rewrite __cmp__ (closes #2715115)
In Python 3k `__cmp__` special method is no longer supported. So we split
it in `__lt__` and `__eq__`.
details on Python3k behavior here:
http://docs.python.org/3.0/whatsnew/3.0.html#ordering-comparisons
Julien Cristau <julien.cristau@logilab.fr> [Mon, 08 Apr 2013 17:33:49 +0200] rev 8891
skeleton: add RPM spec template (closes #2800884)
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 16 Apr 2013 13:44:01 +0200] rev 8890
[clean_session] revert itervalues usage from 0bb18407c053
self.close(session) changes the self._sessions content. We need to create a full
list of value before starting closing them.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 15 Apr 2013 13:18:01 +0200] rev 8889
merge 3.16.x fix
Jérôme Roy <jerome.roy@logilab.fr> [Wed, 10 Apr 2013 16:46:18 +0200] rev 8888
[ldap] Use correct API for logging message
The good practice cat prefer logging to do the substitution himself.
Julien Cristau <julien.cristau@logilab.fr> [Fri, 12 Apr 2013 11:39:10 +0200] rev 8887
Fix obsolete docstring for add_looping_task
The docstring was telling lies since changeset cae198371548
"add_looping_task can be used any time"
Julien Cristau <julien.cristau@logilab.fr> [Thu, 11 Apr 2013 10:32:00 +0200] rev 8886
[devtools] prevent Xvfb resets
Seems like firefox opens more than one connection to the X server in
some cases, and things get utterly confused.
Jérôme Roy <jerome.roy@logilab.fr> [Wed, 10 Apr 2013 16:22:48 +0200] rev 8885
[LDAP] rename unittest ldapuser to ldapsource (prepares #2528116)
the tests involved are not only for ldapuser module but also for the more
general ldapfeed
Necessary to prepare LDAP patch for CWgroup
Julien Cristau <julien.cristau@logilab.fr> [Wed, 10 Apr 2013 15:34:18 +0200] rev 8884
[devtools] protect xvfb-run.sh against clean_up being called twice
David Douard <david.douard@logilab.fr> [Wed, 10 Apr 2013 10:44:55 +0200] rev 8883
Added tag cubicweb-version-3.16.3, cubicweb-debian-version-3.16.3-1, cubicweb-centos-version-3.16.3-1 for changeset ee860c51f56b
David Douard <david.douard@logilab.fr> [Wed, 10 Apr 2013 10:39:15 +0200] rev 8882
3.16.3
Julien Cristau <julien.cristau@logilab.fr> [Tue, 09 Apr 2013 14:23:24 +0200] rev 8881
[service] make sure synchronous call_service has a cnxset
Fixes regression in 3.16.2 (closes #2807720)
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 09 Apr 2013 11:56:27 +0200] rev 8880
Merge testfunc testfunc resurrection Closes #2535377
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 09 Apr 2013 11:40:45 +0200] rev 8879
[web] move qunit test back into web and fix the hanging
qunit test can not work outside web. a lot of try/finally clause have been added
to prevent qunit to hang on error.
A not a test a indeed broken. But we at least put in them a running state again..
William Wordsworth [Mon, 08 Apr 2013 17:34:25 +0200] rev 8878
[test] drop forsaken windmill test (Closes 2535376)
* not run since multiple years
* windmill itself is in poor shape not even packaged in Debian.
The peace which other seek they find;
The heaviest storms not longet last;
Heaven grants even to the guiltiest mind
An amnesty for what is past;
When will my sentence be reversed?
I only pray to know the worst;
And wish as if my heart would burst.
David Douard <david.douard@logilab.fr> [Tue, 09 Apr 2013 09:03:12 +0200] rev 8877
Added tag cubicweb-debian-version-3.16.2-1 for changeset b3c1ad0cbf00
David Douard <david.douard@logilab.fr> [Tue, 09 Apr 2013 09:03:11 +0200] rev 8876
Added tag cubicweb-version-3.16.2 for changeset a2b4f245aa57
David Douard <david.douard@logilab.fr> [Mon, 08 Apr 2013 19:30:42 +0200] rev 8875
3.16.2
Julien Cristau <julien.cristau@logilab.fr> [Mon, 08 Apr 2013 18:38:20 +0200] rev 8874
[server/test] remove dependency on a pyro name server (closes #2801737)
Use a direct pyroloc:// url instead of going through a NS.
Julien Cristau <julien.cristau@logilab.fr> [Mon, 08 Apr 2013 17:30:53 +0200] rev 8873
[packaging] add spec file to build RPMs (closes #2800850)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Mon, 08 Apr 2013 17:12:53 +0200] rev 8872
[predicates] keep making `yes` predicate importable from cubicweb (closes #2790319)
The `yes` predicate was moved out in CubicWeb 3.15 but it should have
remained importable from the cubicweb.predicates module, for bw compat
reasons and also because logilab.common.registry is an implementation
detail.
David Douard <david.douard@logilab.fr> [Mon, 08 Apr 2013 16:53:03 +0200] rev 8871
[views/tables|css] backout rev 895e34d9ae0d
This changeset introduced a GUI behaviour change that has usability side-effects
(eg. shows a non-undoable massive action as a first-class action).
The idea is good, but it requires a better implementation; tabs are not the proper
GUI solution to the original usability issue.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 16:43:26 +0200] rev 8870
[webconfig] cleanly handles ``fckeditor_installed`` when no uiprops
The previous version of the code relied on a default value with a dummy
``FCKEDITOR_PATH`` entry. The new code check if uiprops is initialized or not.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 16:19:29 +0200] rev 8869
[webconfig] fallback to default configs if https ones are not defined
When cubicweb serves a request with an https scheme, it tries to access
``https_uiprops`` and ``https_datadir_urls``. However if those are not defined we
should fallback to unsecure url instead of crashing with a traceback.
There are very valid usecases for undefined https url. For example if your
``base_url``, ``datadir_url`` and uiprops content are already https urls.
Closes #2786643
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 16:13:03 +0200] rev 8868
[webconfig] explicit some webconfig attribute
Explicit declaration of attribute are much clearer. Just do it.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 14:45:10 +0200] rev 8867
merge 3.16.x fix in 3.17.x branch
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 14:18:32 +0200] rev 8866
merge with 3.15.x fix
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 14:16:56 +0200] rev 8865
Added tag cubicweb-debian-version-3.15.11-1 for changeset 09d65bc1f025
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 14:16:46 +0200] rev 8864
Added tag cubicweb-version-3.15.11 for changeset 38c6a3ea8252
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 03 Apr 2013 10:55:56 +0200] rev 8863
[querier] improve 'Password selection not allowed' error message
to report the involved variable name whose type is Password,
it usually help understanding the problem.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 03 Apr 2013 11:09:50 +0200] rev 8862
[predicates] use select_or_none rather than select+try/except, expected to be more efficient
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 12:43:57 +0200] rev 8861
[pkg] prepare version 3.15.11 ?
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 12:42:36 +0200] rev 8860
merge 3.14.x fix into 3.15.x
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 03 Apr 2013 10:51:15 +0200] rev 8859
[facet] ensure a facet DOM id is a valid jQuery identifier. Closes #2789089
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 04 Feb 2013 14:39:55 +0100] rev 8858
[predicates] fix 'adaptable' implementation, used to return 0 on a rset with individualy adaptable entities of different types. Closes #2709663
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 03 Apr 2013 14:33:20 +0200] rev 8857
[cmd] fix exlog documentation (closes #2715913)
The table documentation was out of sync since 8a075bc94563.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 12:26:39 +0200] rev 8856
Added tag cubicweb-debian-version-3.14.10-1 for changeset 197bcd087c87
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 12:26:28 +0200] rev 8855
Added tag cubicweb-version-3.14.10 for changeset 0ff798f80138
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 08 Apr 2013 12:19:24 +0200] rev 8854
[pkg] prepare 3.14.10 release
Adrien Di Mascio <Adrien.DiMascio@logilab.fr> [Mon, 08 Apr 2013 11:09:50 +0200] rev 8853
[querier] fix eid relations handling in SET queries (closes #2797052)
_extract_eid_consts() implementation must consider arithmetic operators
when trying to associate rql variables to specific eids.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Thu, 04 Apr 2013 17:45:09 +0200] rev 8852
[ext/rest] add directive bookmark to rest (closes #2545595)
David Douard <david.douard@logilab.fr> [Wed, 03 Apr 2013 12:17:24 +0200] rev 8851
[c-c create] make post-create step optional (closes #2712041)
In this context the "post-create" step refers to the database's creation and
initialization. We want to be able to create a new instance but skip the
database creation (`db-create` and `db-init` commands) in automatic setup.
Rémi Cardona <remi.cardona@logilab.fr> [Fri, 15 Mar 2013 12:11:29 +0100] rev 8850
[cwconfig] Add optional configuration param to load a UI cube before other cubes
Needed later on to load UI cubes such as legacyui, and one day squareui.
Rémi Cardona <remi.cardona@logilab.fr> [Tue, 02 Apr 2013 12:13:06 +0200] rev 8849
[web/views] Move massmailing to its own cube (closes #2788086)
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 02 Apr 2013 18:15:24 +0200] rev 8848
merge with stable fix
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 02 Apr 2013 16:06:22 +0200] rev 8847
[req] explicit `user` attribute
The `RequestSessionBase` object needs a `user` attribute. It is initialized by
sub class, but having it explicitly declared is much cleaner.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 02 Apr 2013 16:02:52 +0200] rev 8846
[test] use the right order in some assertEqual
The unittest2 function use ``(expected, got)`` order.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 29 Mar 2013 18:00:37 +0100] rev 8845
[session/transaction] move resource accessors on Transaction
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 29 Mar 2013 17:39:14 +0100] rev 8844
[session/transaction] move multiple utility on Transaction
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 29 Mar 2013 17:25:56 +0100] rev 8843
[session/transaction] handle cnxset repository logic in transaction
Interacting with the repo is now handled by the Transaction code directly.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 29 Mar 2013 12:34:53 +0100] rev 8842
[transaction] keep a reference to the repo object
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 29 Mar 2013 18:57:13 +0100] rev 8841
[session] make security_enabled API private
The doc already says "internal API". The old entry point is now officially
deprecated and the context manager have been made private.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 29 Mar 2013 12:47:04 +0100] rev 8840
[session] make hook_control API private
The doc already says "internal API". The old entry point is now officially
deprecated and the context manager have been made private.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 02 Apr 2013 15:11:41 +0200] rev 8839
[service] split session retrieval and service execution
Internal session are not tracker by the repository and can not be retrieved
using _getsession. Moreover their session id is not unique…
Closes #2735700
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 02 Apr 2013 15:11:21 +0200] rev 8838
[service] handle cnxset in the async case only
The service may be called by a session, we really do not want the call to
service to mess with the transaction state.
This does not apply to async were thread magic ensure a dedicated transaction.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 02 Apr 2013 14:46:13 +0200] rev 8837
[service] extract session retrieval from "task" closure
The session was retrieved there because `set_cnxset` must be called in the same
thread as the code using it. We now retrieve the session beforehand and
explicitly call `set_cnxset`.
Vladimir Popescu <vladimir.popescu@logilab.fr> [Tue, 12 Mar 2013 18:31:15 +0100] rev 8836
[cubicweb/doc] Add tutorial on data import in CubicWeb.
This involves creating the "tutorials/dataimport" directory
structure under "cubicweb/doc" and, inside the "dataimport" directory,
putting several files:
- a ResT file containing the tutorial *per se*; this tutorial addresses
the following issues:
* creating a CubicWeb schema for representing a given data set (here,
the Diseasome RDF data, for illustration purposes);
* parsing the data;
* importing the data, by using several stores:
+ the ``RQLObjectStore``, ``NoHookRQLObjectStore`` and
``SQLGenObjectStore`` from the ``dataimport`` module in CubicWeb;
+ the ``MassiveObjectStore`` from the ``dataimport`` module
in the ``dataio`` cube.
The tutorial also provides timing benchmarks of the various stores.
- a set of Python files illustrating the data import, in the context
of Diseasome RDF data parsing:
* a Diseasome RDF data parse module,
* a Diseasome data import module,
* a CubicWeb schema for representing Diseasome data.
Vladimir Popescu <vladimir.popescu@logilab.fr> [Tue, 02 Apr 2013 12:05:51 +0200] rev 8835
[dataimport] Slight message modification in exception handling code.
Vladimir Popescu <vladimir.popescu@logilab.fr> [Tue, 02 Apr 2013 12:04:22 +0200] rev 8834
[dataimport] Handle various data formats when creating buffers from data.
:note: On the long run, this should be addressed before, when these data are
created.
Vladimir Popescu <vladimir.popescu@logilab.fr> [Tue, 02 Apr 2013 12:12:41 +0200] rev 8833
[dataimport] Add a ``flush`` method for all stores.
For ``ObjectStore``, ``RQLObjectStore`` and ``NoHookRQLObjectStore``
the method tries to call the ``commit`` method.
For ``SQLGenObjectStore``, the ``flush`` method is basically
unchanged with respect to previous changesets.
Vladimir Popescu <vladimir.popescu@logilab.fr> [Tue, 02 Apr 2013 12:11:44 +0200] rev 8832
[dataimport] Uniformize the API across the different stores.
This is achieved by modifying the ``relate`` method
so that it takes an extra ``**kwargs``.
More specifically, ``SQLGenObjectStore``'s ``relate`` method
needs the the type of the subject entity which is passed through
``**kwargs`` as the ``subjtype`` keyword argument.
Actually, it is the ``add_relation`` method of the
``SQLGenObjectStore`` who needs this argument. However, as
this method is not called directly (but via the ``relate``
method), the ``subjtype`` argument is passed to
``add_relation`` via ``relate``.
The other stores' ``relate`` methods do not need this
extra argument, hence for the other stores ``**kwargs``
is empty.
In this manner, the API is unified across the different stores.
Anthony Truchet <anthony.truchet@logilab.fr> [Thu, 28 Mar 2013 15:43:23 +0100] rev 8831
[data] Add a CSS for undo UI rendering
The nesting of ordered list and unordered list was badly handled. This has gone
unoticed becaused it was not used. But the undo feature use this markup to
render the changesets. That's why this minor change to ths CSS is introduced.
Julien Cristau <julien.cristau@logilab.fr> [Mon, 17 Dec 2012 14:03:56 +0100] rev 8830
[web/views] extract cube geocoding (closes #353000)
David Douard <david.douard@logilab.fr> [Mon, 11 Feb 2013 11:47:50 +0100] rev 8829
[c-c list] add an optional argument to the list command (closes #2709703)
This optional argument allows to restrict listing to only
a given type of items (cubes, instances, configurations).
Florent Cayre <florent.cayre@logilab.fr> [Wed, 13 Mar 2013 18:17:16 +0100] rev 8828
default base-url now uses fdqn instead of hostname only (closes #2542815)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 28 Mar 2013 15:01:02 +0100] rev 8827
[editcontroller] a small debugging help (closes #2518980)
Dimitri Papadopoulos <dimitri.papadopoulos@cea.fr> [Thu, 28 Mar 2013 13:48:48 +0100] rev 8826
[doc] small doc improvement
Dimitri Papadopoulos <dimitri.papadopoulos@cea.fr> [Thu, 28 Mar 2013 13:48:26 +0100] rev 8825
[doc] fix Pyro url
Dimitri Papadopoulos <dimitri.papadopoulos@cea.fr> [Thu, 28 Mar 2013 13:47:54 +0100] rev 8824
[doc] fix Narval project url
Dimitri Papadopoulos <dimitri.papadopoulos@cea.fr> [Thu, 28 Mar 2013 13:46:50 +0100] rev 8823
[tutorial] minor documentation fixes
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 28 Mar 2013 12:41:14 +0100] rev 8822
merge 3.16.x fix in 3.17.x
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 28 Mar 2013 12:32:26 +0100] rev 8821
merge 3.15.x into 3.16.x
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 28 Mar 2013 12:31:39 +0100] rev 8820
server/source/native: fix wrong usage of .lstrip that produce garbled error messages (closes #2777641)
Fixed an .rstrip(...) for the general case (untested).
Fixed an .lstrip(...) for the sqlite path (tested).
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 28 Mar 2013 11:40:19 +0100] rev 8819
[doc] update 3.17 release note
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 28 Mar 2013 11:45:17 +0100] rev 8818
[migration] fix bug in `CWAttributeAddOp.revertprecommit_event`
The `rdefdef` attribute is set during the operation execution. In some the
operation crash before this assignment. In such case `revertprecommit` raise an
attribute error crashing the whole process and shadowing the original error.
This changeset detect and Avoid this situation.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 16:41:45 +0100] rev 8817
[session] security context directly use transaction object when applicable
Most of the security logic have been moved on Transaction anyway.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 16:43:34 +0100] rev 8816
[session] move context manager logic in the security context manager
The `init_security` and `reset_security` method have no other user that the context manager itself. Having dedicated public function is not useful.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 16:42:18 +0100] rev 8815
[session] hook control context directly use transaction object when applicable
Most of the hooks control logic have been moved on Transaction anyway.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 16:17:21 +0100] rev 8814
[session] move context manager logic in the hook controls context manager
The `init_hooks_mode_categories` and `reset_hooks_mode_categories` have no other
user that the context manager itself. Having dedicated public function is not
useful.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 14:05:14 +0100] rev 8813
[session] drop the useless set_hooks_mode method
It has not external user and trivial code
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 17:09:55 +0100] rev 8812
[session/transaction] move most undo support into transaction
A small part that need repo access has not been moved into transaction yet.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 11:42:13 +0100] rev 8811
[session] simplify mode property
We can delegate very thing to transaction utility
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 11:01:40 +0100] rev 8810
[session/transaction] pass the session object to the Transaction __init__
This simplify access to variables. As we are moving more and more logic and
states in the Transaction it will greatly helps in future commit.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 19:54:36 +0100] rev 8809
[session] use a dedicated class to track cnxset
We introduce a new CnxSetTracker to track `cnxset` used by Transaction and
allows to wait for them. This new class does not use Thread ID not thread
joining to work. This allows to use multiple transaction per thread and a
transaction in multiple thread.
The class itself is totally threadsafe by the Transaction is still not
thread safe.
The old _threads_in_transaction attribute is dropped in favor of a new logic
based on this object. The registration of cnxset used is not done by the
Transaction itself. tx.cnset is a property handling the Consistency of its value
with the CnxSetTracker instance.
Note: The CnxSetTracker instance only track transaction id, not transaction
itself, So not reference cycle are created.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 26 Mar 2013 15:26:29 +0100] rev 8808
[session] cleanup Transaction.cnxset
The attribute should always be there. It is None when not cnxset exists.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 17:50:11 +0100] rev 8807
[session] drop useless getter and setter for security
Those function have very few user and does not anything fancy. Internal user now
access tx.read/write_security directly. External user have been blessed with a
writable property. They are only interested in the write part of they did not
used the return of the removed function. They access it through the session
since I prefer the external world to not be aware of Transaction yet.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 19:40:09 +0100] rev 8806
[session/transaction] move read_security subtlety in transaction
This is transaction data, itshould be handled by the transaction itself.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 16:08:02 +0100] rev 8805
[transaction] initialize dbapi_request in __init__
There is not reason to have it implicitly declared.
The attribute is renamed to match its public name.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 17:00:25 +0100] rev 8804
[whatsnew] notify drop of deprecated code
Vladimir Popescu <vladimir.popescu@logilab.fr> [Wed, 27 Mar 2013 16:33:48 +0100] rev 8803
[web/views] extract cube embed (closes #1916015)
Rémi Cardona <remi.cardona@logilab.fr> [Tue, 26 Mar 2013 12:26:12 +0100] rev 8802
[skeleton] Update debian packaging to support only python 2.6 and up
Rémi Cardona <remi.cardona@logilab.fr> [Wed, 27 Mar 2013 16:58:13 +0100] rev 8801
Drop iprogress code (closes #2777628)
Simon Chabot <simon.chabot@logilab.fr> [Wed, 27 Mar 2013 16:36:47 +0100] rev 8800
[web/views] extract cube sioc (closes #1916018)
Rémi Cardona <remi.cardona@logilab.fr> [Wed, 27 Mar 2013 15:36:41 +0100] rev 8799
[doc] Add 3.17 release notes
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 15:38:05 +0100] rev 8798
[migration] mark all version prior 3.7 as non-migrable
API possible used by such old migration script are not supported in recent
Cubiweb.
Closes #2772958
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 14:53:40 +0100] rev 8797
[dataimport] drop checkpoint backward compat API
Deprecated since 3.7. See #2772958 for details.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 14:53:06 +0100] rev 8796
[dataimport] drop index support deprecated since 3.7
Dropping of pre-3.7 API decided in #2772958
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 14:51:42 +0100] rev 8795
[utils] drop pre-3.7 compat in util
Dropping of API deprecated since 3.7 decided in #2772958
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 14:50:58 +0100] rev 8794
[migration] drop pre-3.7 utility
Dropping of API deprecated since 3.7 decided in #2772958
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 14:50:10 +0100] rev 8793
[entity] drop pre-3.7 api on session
Dropping of API deprecated since 3.7 decided in #2772958
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 14:49:12 +0100] rev 8792
drop dubious comment
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 15:03:14 +0100] rev 8791
[req] drop pre-3.7 api on request
Dropping of API deprecated since 3.7 decided in #2772958
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 27 Mar 2013 14:46:55 +0100] rev 8790
[session] drop pre-3.7 api on session
Dropping of API deprecated since 3.7 decided in #2772958
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 16:35:18 +0100] rev 8789
[transaction] use set operation in the hook control code
We use direct operator on set instead of looping by hand, This simplify the
codes.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 16:08:48 +0100] rev 8788
[session/transaction] move hook management in transaction itself
This is transaction level code.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 15:28:18 +0100] rev 8787
[session] allow writable tx_attr and use it for commit_state
This keep clarifying the code.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 16:12:39 +0100] rev 8786
[session/transaction] move add operation in session code
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 16:13:34 +0100] rev 8785
[session/transaction] move entity life utility on transaction
This access transaction related data and therefor should live in transaction.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 16:20:25 +0100] rev 8784
[transaction] small simplification in ecache code
A single assignation is simpler.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 14:16:16 +0100] rev 8783
[session/transaction] move entity cache management on session
A new utility method is added for that. It is similar to the one used for
attribute access. code is copy pasted as his. Function documentation is added.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 14:17:31 +0100] rev 8782
[session] have a nice helper function to forward access to session
This allows a lighter and clearer code. This will also ease the addition of
deprecation warning in the future.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 12:41:13 +0100] rev 8781
[session] drop dead code
session._tx is never None. New transaction are created if necessary.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 20:14:08 +0100] rev 8780
[session] use tx.data directly in session code.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 20:11:17 +0100] rev 8779
[transaction] rename transaction_data to data
Transaction.transaction_data is redundant. A transaction_data property is left
for backward compatibility. Deprecation mechanism will come in later changeset
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 19:58:43 +0100] rev 8778
[session] document Session._tx
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 20:05:49 +0100] rev 8777
[session] split session creation from default session assignation
This is the first step for more independence for Transaction.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 20:04:43 +0100] rev 8776
[session] make session lock reentrant
We are going to use it for other session related business. It is renamed from
_closed_lock to _lock in the same move.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 19:51:50 +0100] rev 8775
[session] document set_tx
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 19:49:57 +0100] rev 8774
[session] rename txstore variable to tx
This is a more accurate name
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 20:10:19 +0100] rev 8773
[session] rename `_threaddata` to `_tx`
The returned object is a Transaction object.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 19:37:51 +0100] rev 8772
[session] rename self.__threaddata.txdata to self.__threaddata.tx
This is Transaction object now.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 19:42:33 +0100] rev 8771
[session] rename _tx_data into _txs
The object inside are now Transaction object. Not TransactionData object.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 19:32:25 +0100] rev 8770
[transaction] relocate method building transaction context manager
It is in the middle of methods going to be refactored.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 18:49:48 +0100] rev 8769
[transaction] move RQLRewriter in Transaction
This remove the last ``AttributeError`` magic. The ``RQLRewriter`` needs a Session. Its
reset is handled in ``Session`` code to handle that
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 18:38:56 +0100] rev 8768
[transaction] initialize security control attribute in Transaction
There is no reason to not initialize them in __init__ time. This simplify the
Session code.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 18:33:53 +0100] rev 8767
[session] move security constant out of the class
There is no reason for it to not be global. This will ease it use by
``Transaction object``.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 18:27:34 +0100] rev 8766
[transaction] initialize hook control attribute in Transaction
There is no reason to not initialize them in __init__ time. this simplify the
transaction code.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 18:34:04 +0100] rev 8765
[session] Move hook control constants out of the class
There is no reason for them to not be global. This will ease they use by
Transaction object.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 25 Mar 2013 14:20:10 +0100] rev 8764
[transaction] initialize transaction data and state related attribute.
There is not reason to not explicitly declare and initialize attribute in
Transaction.__init__. This change requires the introduction of a
Transaction.clear() method to get ride of some wicked ``AttributeError`` based
logic.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 18:51:03 +0100] rev 8763
[transaction] handle ``mode`` default value in Transaction
The transaction mode is now explicitly passed at creation time and always read
from the Transaction object.
Note that there is a slight behavior change. The transaction mode is now set at
the creation of the transaction. Changes made to the default value have no
longer any effect on existing transaction.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 17:47:45 +0100] rev 8762
[transaction] explicit Transaction cnxset attribute
The Transaction object have a lot more attribute that those previously declared
in __init__. They are just dynamically assigned in Session code.
This changeset explicit the ``cnxset`` and ``mode`` attribute declaration.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 17:09:49 +0100] rev 8761
[server] rename TransactionData to Transaction
Transaction will become a full featured object.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 22 Mar 2013 19:31:21 +0100] rev 8760
[doc] update Session documentation
A major refactoring of Session/Transaction handling is commit. This is a good
occasion to improves the documention.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 21 Mar 2013 19:08:07 +0100] rev 8759
merge 3.16 fix in default
Julien Cristau <julien.cristau@logilab.fr> [Thu, 21 Mar 2013 16:52:13 +0100] rev 8758
[devtools] fix a couple issues with xvfb-run
xvfb-run didn't quite clean up correctly after itself, because:
- dash doesn't run EXIT traps on signals
- if we don't run the command in the background, a TERM handler doesn't run
until the command exits
Julien Cristau <julien.cristau@logilab.fr> [Thu, 21 Mar 2013 16:37:06 +0100] rev 8757
[devtools/qunit] don't open-code subprocess.Popen.terminate
Julien Cristau <julien.cristau@logilab.fr> [Thu, 21 Mar 2013 16:01:05 +0100] rev 8756
[devtools/qunit] get rid of unused variable
Alain Leufroy <alain.leufroy@logilab.fr> [Tue, 18 Oct 2011 16:55:16 +0200] rev 8755
[server] *init_repository* lookup the database instead of the schema to drop tables (closes #810743)
So, tables are dropped even if the schema was changed.
:note: if mssql, drop views before tables.
:note: because of table dependencies we try a second drop sequence
Arthur Lutz <arthur.lutz@logilab.fr> [Thu, 18 Oct 2012 15:52:05 +0200] rev 8754
[book] remove XXX to an old discussion about appengine
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 22 Feb 2013 12:20:59 +0100] rev 8753
[web publish] in case of error, ensure proper http status is set and Content-disposition header is reseted. Closes #2553066
Julien Cristau <julien.cristau@logilab.fr> [Tue, 12 Mar 2013 12:34:07 +0100] rev 8752
Add CubicWebRequestBase.content (closes #2742453)
This is the body of the HTTP request (stream)
David Douard <david.douard@logilab.fr> [Thu, 17 Jan 2013 14:55:07 +0100] rev 8751
add the match_http_method predicate (closes #2559932)
This aim at creating views which are selected on other HTTP methods
(PUT, DELETE, ...)
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 21 Mar 2013 18:35:19 +0100] rev 8750
[pkg] the previous commit requires new feature in yams.
Alexandre Richardson <alexandre.richardson@logilab.fr> [Fri, 30 Nov 2012 16:43:36 +0100] rev 8749
add a command to compare db schema and file system schema (closes #464991)
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Tue, 12 Mar 2013 12:50:05 +0100] rev 8748
drop typed_eid() in favour of int() (closes #2742462)
typed_eid was introduced to abstract the eid type when running on Google AppEngine.
It is not used anymore and can be removed. Let's use int() instead.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 20 Mar 2013 17:58:14 +0100] rev 8747
merge with stable
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 21 Mar 2013 18:13:31 +0100] rev 8746
3.15 is the new old stable
Arthur Lutz <arthur.lutz@logilab.fr> [Mon, 17 Sep 2012 14:39:29 +0200] rev 8745
[web] don't link to None in author box (when author has been deleted) (closes #2409855)
Julien Cristau <julien.cristau@logilab.fr> [Tue, 19 Mar 2013 18:20:57 +0100] rev 8744
dbapi: try to restore compatibility of the connect api with 3.15
A few issues here:
- urlparse('foo').scheme is '', not None
- cnxprops is an optional argument
Regression from 62213a34726e ("[db-api/configuration] simplify db-api
and configuration so that all the connection information is in the
repository url, closes #2521848")
Closes #2754322
Pierre-Yves David <pierre-yves.david@logilab.fr> [Wed, 20 Mar 2013 17:40:25 +0100] rev 8743
3.16 is the new stable
After discussion with David Douard I'm merging 3.16.x branches in stable and
starting 3.17 feature on default.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 16:56:46 +0100] rev 8742
Added tag cubicweb-debian-version-3.15.10-1 for changeset feca12e4a618
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 16:56:45 +0100] rev 8741
Added tag cubicweb-version-3.15.10 for changeset 89bdb5444cd2
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 16:56:28 +0100] rev 8740
prepare 3.15.10
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 16:54:32 +0100] rev 8739
Added tag cubicweb-debian-version-3.16.1-1 for changeset 84fbcdc8021c
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 16:54:31 +0100] rev 8738
Added tag cubicweb-version-3.16.1 for changeset d95cbb7349f0
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 16:53:57 +0100] rev 8737
prepare 3.16.1
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 15:30:06 +0100] rev 8736
[views/primary] some inner sections should use the `limit` by default to avoid a denial of service (closes #2719110)
Today, it is possible to call .related and get a huge unlimited
database-dos-inducing resultset that will be nevertheless limited a
bit further in pure python in the `autolimited` view.
While we cannot completely avoid potential denial of services such as
these we mitigate the problem with the default ui settings: if the
inner vid is `autolimited`, then the relation result sets is computed
using the user-defined limit.
This change respects the semantics of the `autolimited` view and
shouldn't break anything.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 15:18:22 +0100] rev 8735
[entity] ensure the .related(entities=False) parameter is honored all the way down (closes #2755994)
As of today, such a call will always fill the relation cache by
calling .entities() on every single related rset entry.
As a consequence, the `limit` parameter handling also had to be fixed.
It was bogus in the following ways:
* not used in the related_rql, hence potentially huge database
requests, but also actually
* foolishly used in the .entities()-calling cache routine we now
bypass (this changeset ticket's main topic)
Now:
* we set a limit on the rql expression, and
* forbid caching if given a non-None limit (as we don't want to make
the cache handling code more complicated than it is already)
With this, entity.unrelated gets a better limit implementation (so the
code in related/unrelated is nice and symmetric)
Risk:
* _cw_relation_cache disappears completely, which is good, but this is
Python, so you never know ...
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 15:17:34 +0100] rev 8734
[test/web] fix invisibly bogus test (prepares #2755994)
The test was wrong but that was cancelled out by a cache effect and
fuzzy naming.
Wiping the entity caches restores sanity: the choices list are the
same before and after the SET.
Also field.choices uses entity.unrelated but always returns related +
unrelated elements.
Hence `choice` replaces `unrelated` where it makes sense.
AssertIn is used in place of AssertTrue.
Rémi Cardona <remi.cardona@logilab.fr> [Fri, 08 Mar 2013 11:03:28 +0100] rev 8733
[cwconfig] Fix exception handling when building the cube dependency graph
UnorderableGraph exceptions do not have a 'cycles' property. A simple
cast to str does the job.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 12:25:18 +0100] rev 8732
[merge] backport stable fixes
Aurelien Campeas <aurelien.campeas@logilab.fr> [Mon, 18 Mar 2013 16:38:57 +0100] rev 8731
[test/sobject] fix test regression
Was complaining:
- * updated comment #EID (#EID)
? ^^^^
+ * updated comment #EID (duh?)
? ^^^^
in sobjects/test/unittest_supervising.
Rémi Cardona <remi.cardona@logilab.fr> [Wed, 13 Mar 2013 18:36:49 +0100] rev 8730
[web/request] Prune extraneous 'pageid' from generated ajax URL parameters (closes #2758130)
If 'pageid' is given through extraparams, it is sent twice to the
browser. On the JS side, the final URL loadxhtml() will end up using
will have 'pageid' set twice which CubicWeb will readily accept as a
list.
Pruning this parameter makes sure it is exactly once.
Rémi Cardona <remi.cardona@logilab.fr> [Wed, 13 Mar 2013 19:23:22 +0100] rev 8729
[web/component] Use global variable to point to ajax controller (part of #2758254)
Rémi Cardona <remi.cardona@logilab.fr> [Tue, 19 Mar 2013 12:24:40 +0100] rev 8728
[web] Use the new '/ajax' URL path to access the AjaxController (closes #2758254)
5a81fa526b30 took care of all the JS code, this patch cleans up the
remaining python bits.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 19 Mar 2013 10:08:20 +0100] rev 8727
[devtools/httptest] fix syntax error introduced by ce5ae7b80d2c
Rémi Cardona <remi.cardona@logilab.fr> [Tue, 12 Mar 2013 19:24:43 +0100] rev 8726
[component] Fix URL generation for navigation component (closes #2464832)
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 12 Mar 2013 12:08:22 +0100] rev 8725
merge with another default heads
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 12 Mar 2013 12:04:51 +0100] rev 8724
Merge stable into default (NON-TRIVIAL)
- dropping __future__ statement added by d2472948da9c
- added migration from 407acc41beb5 to migration file for 3.16.1
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Fri, 08 Feb 2013 18:36:00 +0100] rev 8723
maintain python2.5 compatibility
Julien Cristau <julien.cristau@logilab.fr> [Fri, 18 Jan 2013 11:36:21 +0100] rev 8722
[schema/workflow] one more typo fix
Also add proper migration.
Julien Cristau <julien.cristau@logilab.fr> [Fri, 22 Feb 2013 11:17:02 +0100] rev 8721
[devtools] add http_publish to CubicWebTC (closes #2565882)
Fakes a http request, without overriding the normal error handling.
Returns the request object so the caller can check for errors.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 18 Jan 2013 12:47:40 +0100] rev 8720
[testlib] url_publish should give url to the request and the rset returned by the path evaluator to ctrl_publish. Closes #2557468
Also, url_publish now accepts a `data` argument to simulate POST of values.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Fri, 22 Feb 2013 19:36:40 +0100] rev 8719
[towards py3k] import reduce() from functools (part of #2711624)
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 11 Mar 2013 18:37:01 +0100] rev 8718
merge stable fix into default
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 09 Jan 2013 18:37:48 +0100] rev 8717
[doc] document dbapi.Connection
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 08 Mar 2013 09:15:09 +0100] rev 8716
[c-c shell] fix command description (-P option is gone long ago)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Mon, 11 Mar 2013 14:46:09 +0100] rev 8715
[hooks/syncschema] do not crash when adding a new entity type (closes #2741643)
The previous version assumed META_RTYPES provide relation definitions
for all entity types.
pwatteyne [Tue, 29 Jan 2013 16:57:44 +0100] rev 8714
[views/debug] Do not show all web sessions without CNX, just count them (closes #2602161)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 05 Mar 2013 15:37:37 +0100] rev 8713
[facets js] use $ instead of jQuery and other small cleanups
Julien Cristau <julien.cristau@logilab.fr> [Thu, 17 Jan 2013 15:42:09 +0100] rev 8712
[devtools/httptest] allow sending other types of requests besides GET
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 08 Mar 2013 18:43:42 +0100] rev 8711
merge with stable
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Mon, 04 Mar 2013 17:22:57 +0100] rev 8710
[ext/rest] fix docstring of rql_role()
Vincent Michel <vincent.michel@logilab.fr> [Fri, 08 Mar 2013 18:04:40 +0100] rev 8709
[web application] Fix missing self. in error_handler
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 18 Dec 2012 12:42:56 +0100] rev 8708
[ldapfeed] all options of a source should be in the same group, else you get AssertionError on c-c add-source. Closes #2538398
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Wed, 20 Feb 2013 16:13:21 +0100] rev 8707
[sources] fix classes that inherit from AbstractSource (closes #2718669)
Julien Cristau <julien.cristau@logilab.fr> [Thu, 24 Jan 2013 10:28:49 +0100] rev 8706
[login] don't redirect to http url if we allow anonymous on https
Closes #2583913
Jérôme Roy <jerome.roy@logilab.fr> [Mon, 25 Feb 2013 11:34:58 +0100] rev 8705
Correct typo in example
Julien Cristau <julien.cristau@logilab.fr> [Mon, 25 Feb 2013 18:02:11 +0100] rev 8704
[testlib] make test_view load the json data
Closes #2721472
Rémi Cardona <remi.cardona@logilab.fr> [Mon, 11 Feb 2013 12:06:16 +0100] rev 8703
[etwist] Properly escape traceback output (closes #2712042)
Stop using StringIO in the process as well.
Rémi Cardona <remi.cardona@logilab.fr> [Mon, 11 Feb 2013 11:26:08 +0100] rev 8702
[dbapi] Stop shadowing exceptions in get_repository() (closes #2710515)
Exceptions are already handled higher up in the stack so there's no
reason to handle them here. Furthermore, non-ConnectionError exceptions
would get hidden, making debugging harder.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Mon, 25 Feb 2013 11:18:14 +0100] rev 8701
[cwvreg] complete cw.web.uicfg cleanup callback (closes #2718217)
1dd655788ece introduced insufficient backward compat support
When cubes directly import uicfg from cubicweb.web (or uihelper) this
also creates a reference in the parent cubicweb.web namespace. This
must be cleaned up as reloaded cubes will take back this reference and
the old versions of its appobjects.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 28 Feb 2013 11:19:36 +0100] rev 8700
[book] fix typo.
remove spurious `i`
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Sat, 16 Feb 2013 21:46:24 +0100] rev 8699
[towards py3k] fix bug introduced by 0bb18407c053
Anthony Truchet <anthony.truchet@logilab.fr> [Tue, 21 Feb 2012 18:23:23 +0100] rev 8698
[doc] Book entry for the undo functionnality.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Thu, 14 Feb 2013 16:45:07 +0100] rev 8697
[toward py3k] rewrite has_key() (part of #2711624)
The `has_key` method is not in Python3K but dict supports __contains__ check for
ages.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Thu, 14 Feb 2013 16:01:24 +0100] rev 8696
[toward py3k] rewrite dict.keys() and dict.values() (part of #2711624)
Python 3K will only expose iterators.
http://docs.python.org/3.0/whatsnew/3.0.html#views-and-iterators-instead-of-lists
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Thu, 14 Feb 2013 15:38:25 +0100] rev 8695
[toward-py3k] rewrite to "except AnException as exc:" (part of #2711624)
The older form is not necessary since we dropped python 2.5 compability. This
will help Python 3.3 experimentation.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Thu, 14 Feb 2013 15:39:23 +0100] rev 8694
[toward-py3k] remove import with_statement (part of #2711624)
They are unneeded since we dropped python 2.5 compatibility. This will help
Python 3.3 experimentation.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Thu, 14 Feb 2013 15:29:20 +0100] rev 8693
pkg: drop python 2.5 compatibility (closes #2711624)
2.5 is not common anymore. Dropping compatibility will help moving to a code
base compatible with Python 3.3
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 14 Feb 2013 15:21:23 +0100] rev 8692
devtools: improve qunit timeout message
Make the message clearer, shorter and properly wrapped.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 14 Feb 2013 14:26:33 +0100] rev 8691
merge default into stable
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Tue, 12 Feb 2013 11:35:15 +0100] rev 8690
[devtools] fix broken windmill test case
David Douard <david.douard@logilab.fr> [Thu, 31 Jan 2013 18:34:31 +0100] rev 8689
Added tag cubicweb-debian-version-3.15.9-1 for changeset 29fbc632a696
David Douard <david.douard@logilab.fr> [Thu, 31 Jan 2013 18:34:30 +0100] rev 8688
Added tag cubicweb-version-3.15.9 for changeset 8bfc0753f1da
David Douard <david.douard@logilab.fr> [Fri, 25 Jan 2013 17:56:15 +0100] rev 8687
Added tag cubicweb-debian-version-3.16.0-1 for changeset 853237d1daf6
David Douard <david.douard@logilab.fr> [Fri, 25 Jan 2013 17:56:14 +0100] rev 8686
Added tag cubicweb-version-3.16.0 for changeset 6c7c2a02c9a0
David Douard <david.douard@logilab.fr> [Fri, 25 Jan 2013 17:52:02 +0100] rev 8685
3.15.9
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 25 Jan 2013 16:44:07 +0100] rev 8684
[ldap test] fix bad merge
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 25 Jan 2013 14:33:40 +0100] rev 8683
[merge] backport stable fixes
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 25 Jan 2013 13:28:23 +0100] rev 8682
[cwctl] fix cubicweb-ctl shell command (closes #2583919)
* add an uri parsing utility that documents a bit the uri cubicweb
supports out of the box
* cwctl: use this utility and refactor a bit for clarity (the novelty
here being real support for old style 'myapp', or:
* 'inmemory://myapp'
* 'pyro://pyro-ns-host:pyro-ns-port/myapp' (pyro access through a
pyro concentrator)
* 'pyroloc://host:port/pyro-instance-id' (direct access to a pyro
repository)
* 'zmqpickle-tcp://host:port'
* dbapi: refactor to sort out some of the complexity and restore
functionality lost in 62213a34726e
David Douard <david.douard@logilab.fr> [Thu, 24 Jan 2013 16:13:40 +0100] rev 8681
[ldap test] move the slapd database directory to a tempdir (closes #2583993)
This is required to be sure we are not hurt by NFS or such...
David Douard <david.douard@logilab.fr> [Thu, 24 Jan 2013 16:10:31 +0100] rev 8680
[ldap auth] make sure imported passwords from LDAP are encrypted (closes #2583994)
When a user is imported from an LDAP source (in ldapfeed or when converting a
user from an ldapsource to system one), we may import a clear-text password,
which we do not want to do in our system database.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 18 Dec 2012 12:25:08 +0100] rev 8679
[ldapfeed] don't crash if one specify an unexisting group in the configuration. Closes #2538399
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 09 Jan 2013 14:27:51 +0100] rev 8678
[doc/ldap] update the ldap chapter wrt the ldapfeed source type (closes #2551863)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 23 Jan 2013 17:58:49 +0100] rev 8677
prepare 3.16
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 23 Jan 2013 18:20:05 +0100] rev 8676
[doc/3.16] complete description of what changed
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 04 Jan 2013 15:39:52 +0100] rev 8675
[rql sources] uses an URL as remote host address for pyro/zmq rql sources,
instead of extra configuration parameters. Follows modification of dbapi.connect api.
Closes #2539822
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 04 Jan 2013 15:18:44 +0100] rev 8674
[repo sources] move handling of source's url into abstract source as this becomes shared by most sources
prepare #2539822
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 10 Jan 2013 22:52:47 +0100] rev 8673
[db-api] rename repo_connect into _repo_connect to mark it private. Closes #2521848
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 10 Jan 2013 22:51:10 +0100] rev 8672
[repository sources] copy source configuration: source's __init__ modify it while config.sources() return a cached dictionary which shouldn't be modified
This causes pb since f8aa87a773b2 (though it's unclear why it hasn't been a problem before).
Closes #2521848
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 10 Jan 2013 22:50:34 +0100] rev 8671
cleanup repository connect doc: cnxtype is now deprecated / base_url has never been given that way. Follow #2521848
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 22 Jan 2013 18:16:20 +0100] rev 8670
prefix "tcp://" zmq uris with "zmqpickle" (closes #2574114)
* it turns "tcp://" into "zmqpickle-tcp://"
* will leave room for future non-pickling communications using zmq
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 21 Jan 2013 18:01:25 +0100] rev 8669
[db-api/configuration] simplify db-api and configuration so that all the connection information is in the repository url, closes #2521848
eg no more specific option of pyro ns host, group, etc. This also fixes broken ZMQ
sources.
Changes:
* dropped pyro-ns-host, pyro-instance-id, pyro-ns-group from client side config, in
favor of repository-uri. No migration done, supposing there is **no web-only config**
in the wild. Also stop discovering the connection method through the repo_method class
attribute of the configuration, varying according to the configuration class. This is
a first step on the way to a simpler configuration handling. Notice those pyro options
are still available for repository only / all-in-one configurations as they are needed
to configure the pyro server.
* stop telling connection method using ConnectionProperties, this is so boring. Also,
drop _cnxtype from Connection and cnxtype from Session. The former is replaced by a
is_repo_in_memory property and the later is totaly useless.
* deprecate in_memory_cnx which becomes useless, use _repo_connect instead
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 10 Jan 2013 23:05:45 +0100] rev 8668
[ldap test] ensure slapdd launch went fine and move ldapfeed setUp to parent class, as all ldap sources deal with url
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 10 Jan 2013 18:11:33 +0100] rev 8667
[web/uihelper,uicfg] transform uihelper functions into uicfg objects methods (closes #2543949)
Florent Cayré <florent.cayre@logilab.fr> [Mon, 21 Jan 2013 16:34:09 +0100] rev 8666
make ui configurations selectable (closes #2406609)
* introduce a new 'uicfg' registry (storing instances)
* use the relevant new APIs from lgc.registry to manage the new
registrable uicfg objects
* cw event manager useage is gone; instead thze standard registry
reloading mechanism is used
* ensure i18n commands still work (devctl)
* introduce dynamic uicfgs use whenever possible (various views), even
though sometimes the classic 'static' usage remains
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 10 Jan 2013 18:34:10 +0100] rev 8665
[uicfg] uicfg.py moves from web/ to web/views/ (prepares #2406609)
We are about to make uicfg selectable. Registrable / selectable views
and helpers live in web/views. Hence the move.
Backward compat is put in place. However CubicWeb imports of uicfg are
updated to the new location.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 10 Jan 2013 13:03:38 +0100] rev 8664
[appobject] introduce RegistrableObject base class (prepares #2406609)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Mon, 21 Jan 2013 13:55:25 +0100] rev 8663
[cwvreg] introduce lgc version 0.59 and remove unneeded method redefinition (prepares #2406609)
The new logilab.common.registry makes this moot.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 23 Nov 2012 18:27:35 +0100] rev 8662
[BFSS] mark fs_imported value as uncachable
This will finally fix the `test_bfss_fs_importing_transparency` pass again.
Regression was introduced by 4ba11607d84a
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 18 Jan 2013 18:48:15 +0100] rev 8661
[entity] add a "repo_side" parameter to `_cw_dont_cache_attribute`
This parameter (defaulting to `False`) is used to inform cubicweb that we really
really do not want to cache a value during creation or update. This will be used
by a storage that may do very specific processing on attribute values that result
in a stored value different than the provided one (e.g. BFSS `fs_importing`
mode).
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 18 Jan 2013 18:31:51 +0100] rev 8660
[merge] backport stable fixes
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 18 Jan 2013 18:31:25 +0100] rev 8659
[entities] fix test failures introduced by fixes in workflow related message strings (completes 9bb93efa1952)
Vladimir Popescu <vladimir.popescu@logilab.fr> [Fri, 18 Jan 2013 16:40:11 +0100] rev 8658
[doc/book/] Corrected typo in en/tutorials/base/customizing-the-application.rst, for the add_cubes function call
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 18 Jan 2013 17:37:35 +0100] rev 8657
[entity,views/json] backout 353bbd17a8b6 (reopens #2559931)
Calling .complete() unconditionnally from the json encoder is unsafe
since on entity creation validation:
* an eid may have been drawn (hence even .has_eid() would not help)
while processing form data in the edit controller
* a ValidationError may have been raised and the entity-creating
transaction rollbacked
This leads to a crash on the return path from the validation to the
browser, where the json_dumps((status, args, entity)) call will
stumble upon the .complete() call which will fail because the entity
does not (any more) exist in the database.
Julien Cristau <julien.cristau@logilab.fr> [Tue, 15 Jan 2013 20:17:09 +0100] rev 8656
[schemas] fix typo
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 17 Jan 2013 18:30:08 +0100] rev 8655
merge with stable
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 10 Jan 2013 18:31:43 +0100] rev 8654
[appobject] cleanup module (prepares #2406609)
* remove unused imports
* break long lines
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 17 Jan 2013 14:29:12 +0100] rev 8653
[uicfg] remove pre 3.6 bw compat structure (prepares #2406609)
This should have been done in a673d1d9a738.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 17 Jan 2013 17:12:06 +0100] rev 8652
[testlib] test_view now parse json data, closes #2557467
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 17 Jan 2013 14:39:51 +0100] rev 8651
Improve entity json export (closes #2559931)
Make output from __json_encode__ predictable; use it in the ejsonexport
view.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 17 Jan 2013 14:40:57 +0100] rev 8650
[web/application/test] drop useless code
This is already done in CubicWebTC
Pierre-Yves David <pierre-yves.david@logilab.fr> [Thu, 17 Jan 2013 15:11:37 +0100] rev 8649
[test] precheck initial condition
Julien Cristau <julien.cristau@logilab.fr> [Wed, 16 Jan 2013 17:42:16 +0100] rev 8648
[packaging] Fix search in squeeze cubicweb-documentation package (closes #2558496)
Work around broken combination of jquery 1.4 and sphinx 0.6 in squeeze by
patching up doctools.js.
Julien Cristau <julien.cristau@logilab.fr> [Wed, 16 Jan 2013 17:41:45 +0100] rev 8647
[packaging] don't compress txt files (closes #2558496)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 09 Jan 2013 21:48:59 +0100] rev 8646
[wf/test] fix tests broken by changes from another patch which have slipped there
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 09 Jan 2013 16:06:20 +0100] rev 8645
[merge] backport stable
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 09 Jan 2013 15:46:05 +0100] rev 8644
[web/test] fix stale reference to the changelog view (closes #2423532)
David Douard <david.douard@logilab.fr> [Wed, 09 Jan 2013 18:03:17 +0100] rev 8643
Added tag cubicweb-debian-version-3.15.8-1 for changeset 4ef457479337
David Douard <david.douard@logilab.fr> [Wed, 09 Jan 2013 18:03:17 +0100] rev 8642
Added tag cubicweb-version-3.15.8 for changeset 459d0c48dfaf
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 09 Jan 2013 16:04:26 +0100] rev 8641
[test] fix possible views test (closes #2544358)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 09 Jan 2013 15:40:41 +0100] rev 8640
prepare 3.15.8
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 09 Jan 2013 14:29:29 +0100] rev 8639
[ldapfeed] if a deactivated user becomes available again in its source, reactivate it (closes #2542776)
* cwusers that see their ldap source counterpart disappear are
deactivated
* until now they were not activated again on reappearance
* note this behaviour in the doc
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 08 Jan 2013 15:53:22 +0100] rev 8638
[ldaputils,ldapparser] correctly compute "deleted" users (closes #2542083)
* in ldaputils.py, removal of an unneeded method (checking existence
of an object in the ldap, but not using the configuration filters)
* in the ldapparser, memoize the (filtered) search so as to serve both
.process and .is_deleted
* add a non regression test for the 'user-filter' source config entry
+ deletion
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 03 Jan 2013 23:27:56 +0100] rev 8637
[dataimport] new ignore_errors argument to ucsvreader, default to False. Closes #2547200
David Douard <david.douard@logilab.fr> [Tue, 18 Dec 2012 11:40:51 +0100] rev 8636
[ldapsource] keep python 2.5 compatibility (closes #2541602)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 18 Dec 2012 10:42:11 +0100] rev 8635
[ldapuser2ldapfeed] .values -> .iteritems (closes #2542872)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Mon, 17 Dec 2012 14:40:03 +0100] rev 8634
[ldap tests] cleanup in preparation of #2542083
Aurelien Campeas <aurelien.campeas@logilab.fr> [Mon, 17 Dec 2012 14:26:41 +0100] rev 8633
[ldapparser] demote warning level (actually important user info can leak there) (prepares #2542083)
Arthur Lutz <arthur.lutz@logilab.fr> [Thu, 03 Jan 2013 23:10:50 +0100] rev 8632
Remove changelog view (closes #2423532)
Vincent Michel <vincent.michel@logilab.fr> [Wed, 02 Jan 2013 18:17:02 +0100] rev 8631
[dataimport] Allow to replace escape char in the create_copyfrom_buffer
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Sun, 30 Dec 2012 22:31:10 +0100] rev 8630
[doc] fix function name FTIRANK
Adrien Di Mascio <Adrien.DiMascio@logilab.fr> [Thu, 20 Dec 2012 12:15:57 +0100] rev 8629
[json] enable jsonexport selection on empty rsets (closes #2544358)
Adrien Di Mascio <Adrien.DiMascio@logilab.fr> [Thu, 20 Dec 2012 12:14:14 +0100] rev 8628
[test] fix req default value handling in CubicWebTC.view (closes #2544376)
It's no more than the standard ``if rset`` vs. ``if rset is None`` error.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 19 Sep 2012 17:16:04 +0200] rev 8627
[ajax] fix attribute lookup (closes #2491038)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 11 Dec 2012 18:20:00 +0100] rev 8626
[server] add debugging for Hooks & Operations (closes #2470048)
Vincent Michel <vincent.michel@logilab.fr> [Fri, 14 Dec 2012 14:08:14 +0100] rev 8625
[dataimport] Add SQL Store for faster import - works ONLY with Postgres for now, as it requires "copy from" command - closes #2410822
This store will use:
- copy from for massive insertions.
- execute from for update.
The API of this store is similar to the other stores.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 26 Nov 2012 12:52:33 +0100] rev 8624
[test] swap order in assert of `test_users_and_groups_non_readable_by_guests`
unittest2 order is (expected, got), not the opposite. This help test report
readbility.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Mon, 26 Nov 2012 19:47:12 +0100] rev 8623
[test] fix server/querier/build_descr1 test.
There is no self.transaction of TestCase. I assumed the test writer meant a
session. This seems to make the test pass.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 27 Nov 2012 12:36:33 +0100] rev 8622
[server] make `test_bfss_fs_importing_transparency` less verbose on failure
Dumping the whole content of a file on failure is a bit annoying. We only print
the bad version here (it's usually the file path).
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 23 Nov 2012 17:12:58 +0100] rev 8621
[entity] drop redundant cache update
This ``cw_attr_cache`` update is redundant, ``_cw_update_attr_cache`` already do this step.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Mon, 03 Dec 2012 13:22:10 +0100] rev 8620
[cw-ctl] silence msgcat and msgfmt (closes #2527594)
David Douard <david.douard@logilab.fr> [Wed, 12 Dec 2012 22:13:38 +0100] rev 8619
Added tag cubicweb-debian-version-3.15.7-1 for changeset c5400558f370
David Douard <david.douard@logilab.fr> [Wed, 12 Dec 2012 22:13:37 +0100] rev 8618
Added tag cubicweb-version-3.15.7 for changeset d8916cee7b70
David Douard <david.douard@logilab.fr> [Wed, 12 Dec 2012 22:11:52 +0100] rev 8617
prepare 3.15.7
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 04 Dec 2012 13:41:20 +0100] rev 8616
[migration] fix crash when adding a new meta relation type. Closes #2532483
David Douard <david.douard@logilab.fr> [Mon, 10 Dec 2012 11:50:42 +0100] rev 8615
[ldapfeed] fix connection leak (closes #2532528)
David Douard <david.douard@logilab.fr> [Tue, 04 Dec 2012 16:16:08 +0100] rev 8614
[zmq] add an introductive docstring on ZMQComm
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 11 Dec 2012 16:14:57 +0100] rev 8613
[server config] on quick start, system source is still activated. Closes #2535714
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 11 Dec 2012 17:07:57 +0100] rev 8612
[web] use `inline` `Content-Disposition` by default (closes #2535734)
since known time we have been serving static file with a `filename` parameter on
the `Content-Disposition` header. But since d74addac92bb we explicitly serve
file as attachment if a filename is provided. However this is valid to have
`inline` disposition and `filename` parameter. This changeset revert this part
of d74addac92bb, going back to `inlined` by default.
`IDownloadable` code explicitly request `attachment` content to preserve
expected behavior.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 11 Dec 2012 16:57:18 +0100] rev 8611
[web] allow configuration of the Content-disposition value
The `set_content_type` function now takes and optional `disposition` parameter
to control the value of this HTTP header.
Use of `Content-disposition: inline` with a filename parameter are valid, so
the presence of filename does not allows to choose between `attachment` and
`inline`
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 11 Dec 2012 17:17:40 +0100] rev 8610
[downloadable] fix filename HTTP header for simple name with space (closes #2535715)
Since d74addac92bb, we export simple ascii filename without any encoding in the
`filename` parameter of the `Content-Disposition` header. If this name contains
space this will fails, the parameter value will be truncated at the space
position. (eg. `filename=jungle babar.txt` read as `jungle`)
We need to quote the filename to prevent this (eg. `filename="jungle babar.txt"`).
Then literal quote and backslash needs to be escaped too.
The new escaping is correct according this extensive test case data base:
http://greenbytes.de/tech/tc2231/
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Mon, 03 Dec 2012 00:03:03 +0100] rev 8609
merge fixes from stable
David Douard <david.douard@logilab.fr> [Fri, 30 Nov 2012 21:19:36 +0100] rev 8608
Added tag cubicweb-debian-version-3.15.6-1 for changeset b05e156b8fe7
David Douard <david.douard@logilab.fr> [Fri, 30 Nov 2012 21:19:35 +0100] rev 8607
Added tag cubicweb-version-3.15.6 for changeset 0163bd9f4880
David Douard <david.douard@logilab.fr> [Fri, 30 Nov 2012 21:18:05 +0100] rev 8606
prepare 3.15.6
David Douard <david.douard@logilab.fr> [Tue, 27 Nov 2012 14:48:03 +0100] rev 8605
[web] add a digital signature to error form (closes #2522526)
Simple (and quite weak) implementation of a digital signature of the content
to be submited by email in the error report view generated by ErrorView.
The signature is a simple hmac hash computed using a secret key (generated at
repository startup) and the "secret" form content to be included in the
notification email. The controller can then check this content has not been
modified or forged by a malicious user.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Wed, 28 Nov 2012 11:44:15 +0100] rev 8604
[web/views] bugfix: the mime type is text/plain, not text/txt (closes #2526345)
Arthur Lutz <arthur.lutz@logilab.fr> [Tue, 27 Nov 2012 17:16:23 +0100] rev 8603
[doc] fix of personnal etc directory in book
David Douard <david.douard@logilab.fr> [Tue, 27 Nov 2012 12:24:56 +0100] rev 8602
[web] add a Forbidden exception
This is similar to the Unauthorized exception, but generates a 403 error
instead of a 401 (Unauthorized)
Katia Saurfelt <katia.saurfelt@logilab.fr> [Tue, 27 Nov 2012 11:38:03 +0100] rev 8601
[web] add a ``anonymize-jsonp-queries`` option in file configuration (closes #2465388)
This option controls connection anonymizing before executing any query
for CSRF / safety reason.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 27 Nov 2012 11:27:49 +0100] rev 8600
[downloadable] fix filename in HTTP header (closes #2522325, #2522324)
Before this changeset we use the `filename` header with utf8 encoded filename
all the time.
However RFC6266 says:
The parameters "filename" and "filename*" differ only in that "filename*"
uses the encoding defined in [RFC5987], allowing the use of characters not
present in the ISO-8859-1 character set ([ISO-8859-1]).
Therefore, we alter the code to:
1. Use `filename` and `ascii` encoding whenever possible,
2. use `filename*` with `utf8` encoding otherwise (with a filename fallback for
old browser)
We also switch the `content-disposition` value to attachement if filename is
specified, this will result as a mandatory download according to RFC6266. This
mandatory download is the expected behavior.
We changes the filename encoding to RFC5987 which is simpler, supported by all
and modern browser (including IE from version 6) and does not suffer from the
continuation issue. (see ticket #2522324 for details)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 27 Nov 2012 11:18:42 +0100] rev 8599
docstring typo
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 22 Nov 2012 16:13:43 +0100] rev 8598
[facet] make BitFieldFacet allow special 0 value. Closes #2522697
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Fri, 16 Nov 2012 12:28:30 +0100] rev 8597
[doc] ubuntu LTS is now Precise Pangolin
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 16 Nov 2012 11:53:17 +0100] rev 8596
backport stable
Arthur Lutz <arthur.lutz@logilab.fr> [Fri, 16 Nov 2012 11:52:06 +0100] rev 8595
[server] implement base_url with secure=True (closes #2508638)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 16 Nov 2012 11:41:38 +0100] rev 8594
[validation api] properly use yams 0.36 validation error api and update message catalog. Follows bbe0d6985e59
the creation of the `translate` method in the 23a10f049447 yams commit.
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 09 Nov 2012 15:27:40 +0100] rev 8593
[wsgi] saner use of `self.config` instead of `config`
Pierre-Yves David <pierre-yves.david@logilab.fr> [Fri, 09 Nov 2012 17:14:18 +0100] rev 8592
[server] fix repository initialisation
Changeset d753d6a6798f was breaking database creation. Dropping the
`config.creating` clause lead to trying to load the schema from database even in
creation mode. Conditional are a bit altered and reordered to prevent this to
happen.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 24 Oct 2012 09:56:52 +0200] rev 8591
[web test] make unittest_viewselectors work if rdflib isn't available
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 23 Oct 2012 12:12:43 +0200] rev 8590
[js/ajax] documentation of 'reload' is missing an argument
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 23 Oct 2012 12:12:22 +0200] rev 8589
[ldapfeed] move docstring to the class instead of the module
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 14 Nov 2012 11:12:13 +0100] rev 8588
[hook] fix hook base class so access to __registries__ doesn't call check_event, only call it in registered callback. Closes #2517748
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 08 Nov 2012 11:43:11 +0100] rev 8587
[startup hook/looping tasks] separated hook for each looping task to ease modification from cubes. Closes #2517096
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 08 Nov 2012 11:40:24 +0100] rev 8586
[ldaputils] should use entity.eid instead of entity on raising ValidationError. closes #2517095
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 14 Nov 2012 11:06:24 +0100] rev 8585
[dbapi] provide get_option_value over DBAPIRequest (closes #2515522)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 24 Oct 2012 14:38:05 +0200] rev 8584
Added tag cubicweb-debian-version-3.15.5-1 for changeset 19e115ae5442
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 24 Oct 2012 14:38:04 +0200] rev 8583
Added tag cubicweb-version-3.15.5 for changeset b0e086f451b7
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 24 Oct 2012 12:08:21 +0200] rev 8582
prepare 3.15.5
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 11 Sep 2012 12:42:26 +0200] rev 8581
[entity attr cache] mark attribute as uncacheable in the underlying function else we may miss some changes.
Also rewrite a storage test currently failing because cache of the entity created by the
test transaction, distinct from the entity created internally and given to hooks and all,
has its attributes cache not updated. As this doesn't seems a proper usage, rewrite it
as expected.
Much probably closes #2423719 definitly.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 05 Oct 2012 16:54:22 +0200] rev 8580
[repository] move modification of appobject_path to repository initialization code so we can restore it later to avoid side effect on the config. Fix regression introduced in d32ab8570e5d
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 11 Oct 2012 18:42:13 +0200] rev 8579
[req / session] drop is_internal_session (buggy) compat on base request by implementing necessary methods on internal manager
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 20 Sep 2012 16:33:51 +0200] rev 8578
[check integrity] use session consistently
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 20 Sep 2012 16:18:13 +0200] rev 8577
[test] use session commit/rollback to be consistent with the test
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 23 Oct 2012 15:00:53 +0200] rev 8576
[merge] reintegrate that black sheep
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 17 Oct 2012 15:47:12 +0200] rev 8575
[ldapparser] utf-8 uri + unicode emailaddr will crash if the later is not properly encoded (closes #2508515)
Anthony Truchet <anthony.truchet@logilab.fr> [Wed, 22 Feb 2012 11:57:42 +0100] rev 8574
backporting
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 12 Oct 2012 16:05:16 +0200] rev 8573
backport stable
Florent Cayré <florent.cayre@logilab.fr> [Tue, 02 Oct 2012 16:44:55 +0200] rev 8572
fix no more running zmq repository test (closes #2500153)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 28 Sep 2012 17:49:54 +0200] rev 8571
[dbapi] load_appobjects must attempt to load available cubicweb configurations to avoid error when some object use a persistent propery (CWProperty) defined there. Closes #2497697
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 12 Oct 2012 15:38:58 +0200] rev 8570
dummy merge
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 12 Oct 2012 12:47:45 +0200] rev 8569
[ajax] reload function should set 'processing' cursor. Closes #2503899
Aurelien Campeas <aurelien.campeas@logilab.fr> [Mon, 01 Oct 2012 12:49:34 +0200] rev 8568
[misc/scripts] a slightly experimental script to help repair LDAPUser cwusers suffering from split-brainite (closes #2497108)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Mon, 24 Sep 2012 16:45:26 +0200] rev 8567
[views/boxes] re-establish the proper selector (closes #2496294)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Mon, 01 Oct 2012 12:40:35 +0200] rev 8566
[ldapparser] raise specific error if the configuration is wrong (closes #2498164)
Arthur Lutz <arthur.lutz@logilab.fr> [Mon, 08 Oct 2012 17:50:12 +0200] rev 8565
[skeleton] add pypi classifiers in __pkginfo__ and setup.py (closes #2502156)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 18 Sep 2012 17:04:44 +0200] rev 8564
[c-c shell -H] add verbosity=0 so we are not asked to confirm everything, as when not using -H
Adrien Di Mascio <Adrien.DiMascio@logilab.fr> [Fri, 21 Sep 2012 15:03:59 +0200] rev 8563
mock ``CWUser.prefered_language()`` on InternalManager objects.
The recent split of patches for session refactoring broke this.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 14 Sep 2012 14:15:39 +0200] rev 8562
[session] fix arguments default value and promote usage of security_enabled as session method. Closes #2481820
One should use session method rather than direct usage of the context manager
of the same name.
Fix default argument values for consistency with the context manager: when one
omit an argument, meaning is "keep the current value", not "disable security".
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 20 Sep 2012 14:50:06 +0200] rev 8561
[session] promote usage of [deny|all]_all_hooks_but session methods rather than hooks_control context manager directly
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 10 Sep 2012 16:25:48 +0200] rev 8560
[web app] move set of status_out into validation_error_handler to ease readability
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 10 Sep 2012 16:24:32 +0200] rev 8559
[workflow test] don't use session.user, subject to internal changes
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 10 Sep 2012 16:07:13 +0200] rev 8558
[db creation test] more testing of db initialization: call build_db_cache and ensure admin user exists
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 17 Sep 2012 17:52:17 +0200] rev 8557
[source synchronization hooks] Fix/enhance system source hooks
They are broken if launched during repository initialization (this was not the
case yet, but will be soon...). Add additional checks to ensure one doesn't try
to store system source config in the database, as it will be ignored in favor of
the "sources" file.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 17 Sep 2012 17:48:55 +0200] rev 8556
[validation error] refactor validation error handling so translation is done on the web side
Users should now use cubicweb.validation_error helper function that will activate the feature
with other handy behaviours. Also test testing for message in errors should call
exception.tr(unicode) before comparing.
Using bare ValidationError keep backward compat.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 11 Sep 2012 22:32:01 +0200] rev 8555
[repo cleanup] drop code moved to querier by 7e264ce34cd4
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 11 Sep 2012 22:32:01 +0200] rev 8554
[repo cleanup] drop code moved to querier by 7e264ce34cd4
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 18 Sep 2012 11:37:24 +0200] rev 8553
Added tag cubicweb-debian-version-3.15.4-1 for changeset 70cb36c826df
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 18 Sep 2012 11:37:23 +0200] rev 8552
Added tag cubicweb-version-3.15.4 for changeset 63260486de89
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Mon, 17 Sep 2012 17:48:02 +0200] rev 8551
[facets] add link 'focus on selection' (closes #525277)
Julien Cristau <julien.cristau@logilab.fr> [Mon, 10 Sep 2012 15:08:55 +0200] rev 8550
[server/utils] catch ValueError from password verification
passlib can raise ValueError when it can't recognized a hash. Treat
that as a wrong password.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 10 Sep 2012 13:59:25 +0200] rev 8549
[test] reindent and use request() rather than bare session
this avoid error due to implementation details of session
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 06 Sep 2012 15:03:52 +0200] rev 8548
[repo] fix debug code in DBG_REPO mode (closes #2469942)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 13 Sep 2012 17:26:15 +0200] rev 8547
[datafeed] properly call hooks for inlined relations on entity creation. Closes #2481156
Julien Cristau <julien.cristau@logilab.fr> [Mon, 10 Sep 2012 15:17:10 +0200] rev 8546
[sources/native] automatically update passwords using deprecated hashes on login
Closes #2465904
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 14 Sep 2012 17:42:24 +0200] rev 8545
[repo pyro] fix previous commit: should not import Pyro in remoterql module/base class, it may be missing
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 11 Sep 2012 21:51:54 +0200] rev 8544
massive copyright update to avoid clutering later patches
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 10 Sep 2012 16:50:28 +0200] rev 8543
minor cleanups/typos
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 10 Sep 2012 17:36:22 +0200] rev 8542
[session / querier] reorganize code to building result set descriptions
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 11 Sep 2012 12:44:33 +0200] rev 8541
[web] search state doesn't need cnx, remove useless test
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 10 Sep 2012 17:31:07 +0200] rev 8540
[schema] rename schema permissions function: session may also be a request, use _cw
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 10 Sep 2012 14:02:06 +0200] rev 8539
[repo initialisation] during repo creation, load all hooks and entities code
this simplify code and make it more consistent
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 10 Sep 2012 13:53:59 +0200] rev 8538
[request/session] refactor language handling: don't attempt to sync web/repo languages
This decouple thing and make code easier to understand. Previous behaviour was fine
w/ validation error that were translated on the server side, but isn't satisfying for
notification and all. Now:
* translations should be done on the ui side (see previous validation error
refactoring)
* consistent behaviour: each side (web/repo) is responsible to deal with its
request/session of language, no weird interaction between them on this topic
* drop on the way the 'session properties' api, used only for that matter.
-> much simpler/cleaner/saner api
The thing missing being a way for user to tell "My favorite language is xxx but I also
want cw to consider my http language header)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 10 Sep 2012 14:00:09 +0200] rev 8537
[config] turn internal configuration methods building appobjects search path into normal method rather than class method
as this is useless and make path filters difficult to override (we had to
override the class attribute, as instance attributes were not seen).
Also rename related methods for consistency with current vocabulary
David Douard <david.douard@logilab.fr> [Mon, 03 Sep 2012 12:26:20 +0200] rev 8536
fix missing import
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 07 Sep 2012 14:01:59 +0200] rev 8535
backport stable
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 07 Sep 2012 13:48:55 +0200] rev 8534
[hooks/syncshema] fix logging level and nicer message (wrong changeset published previously)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 31 Aug 2012 13:19:39 +0200] rev 8533
[hooks/syncschema] do not crash on DROP of an already dropped index/... (closes #2465393)
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 23 Aug 2012 11:43:43 +0200] rev 8532
[cwctl] show a better diagnostic message on version violation (closes #2464800)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 30 Aug 2012 17:07:59 +0200] rev 8531
[tabs] fix pb with non-lazy tabs: style isn't properly set due to missing jquery.ui activation. Closes #2465657
also do a small cleanup on the way, and properly implements render_entity rather than cell_call,
as one would expect regarding default PrimaryView code.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 04 Sep 2012 06:52:41 +0200] rev 8530
[migration] fix backward compat for rename_relation
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 04 Sep 2012 06:09:17 +0200] rev 8529
[datafeed] make cnxset handling of datafeed source more robust
currently we may run in some cases where the session has no more cnxset
depending on errors and parser's handling of the cnxset.
Also, free the cnxset and reacquire it later, letting a chance to other
threads to run.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 30 Aug 2012 17:38:43 +0200] rev 8528
don't use rset.rowcount in predicates, this makes them usable with other types such as lists
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 30 Aug 2012 17:11:05 +0200] rev 8527
[c-c db-check] don't skip is/is_instance_of mandatory relation to avoid telling two opposite messages when the relation is missing. Closes #2465659
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 23 Aug 2012 11:19:44 +0200] rev 8526
[ui tabs] avoid duplicate rset argument if already specified in tab kwargs. Closes #2464786
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Aug 2012 13:29:37 +0200] rev 8525
[entity edition] don't remove values from attribute cache on the repository side
This follows changesets 552de9f0c46d, 1527b012802f, 25da1e5c7c50 and 4ba11607d84a.
closes #2423719 ?
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 31 Aug 2012 18:11:24 +0200] rev 8524
fix ldapuser test
Julien Cristau <julien.cristau@logilab.fr> [Fri, 31 Aug 2012 16:50:28 +0200] rev 8523
Prepare 3.15.4
Julien Cristau <julien.cristau@logilab.fr> [Fri, 31 Aug 2012 13:55:59 +0200] rev 8522
migration: replace empty passwords with random ones on upgrade
Julien Cristau <julien.cristau@logilab.fr> [Fri, 31 Aug 2012 12:52:45 +0200] rev 8521
ldapuser2ldapfeed: create CWUsers with random passwords, not empty ones
Aurelien Campeas <aurelien.campeas@logilab.fr> [Fri, 31 Aug 2012 16:58:08 +0200] rev 8520
[source/native] only system source users should be authenticated by the native source (closes #2465883)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Aug 2012 17:20:06 +0200] rev 8519
[web test] fix test broken by 199fefe396ab
Adrien Di Mascio <Adrien.DiMascio@logilab.fr> [Wed, 22 Aug 2012 14:19:30 +0200] rev 8518
[fti] add some documentation
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Aug 2012 14:17:22 +0200] rev 8517
[form] add assertion to ensure field has a name when `role_name` is called
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 21 Aug 2012 15:23:29 +0200] rev 8516
Added tag cubicweb-debian-version-3.15.3-1 for changeset 7ad423a5b6a8
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 21 Aug 2012 15:23:28 +0200] rev 8515
Added tag cubicweb-version-3.15.3 for changeset 0e012eb80990
Pierre-Yves David <pierre-yves.david@logilab.fr> [Tue, 21 Aug 2012 14:20:08 +0200] rev 8514
[pkg] prepare 3.15.3 release
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 02 Aug 2012 19:00:22 +0200] rev 8513
[entity edition] stop comparing values as it may trigger exceptions (e.g. timeseries cube tests)
Rely on a changes in yams instead where we have guarantee to have only comparable objects.
This follows changesets 1527b012802f, 25da1e5c7c50 and 4ba11607d84a, and should definitly
closes #2423719
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 01 Aug 2012 09:42:36 +0200] rev 8512
[tabbed view] make tabs optionaly lazy: lazy=False on the tabbed view trigger synchronous tabs. Closes #2443038
This is useful for tabs holding a self-posted form for instance.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 02 Aug 2012 18:52:27 +0200] rev 8511
[web form] refactor Form.__init__ so that extra kwargs are set earlier in the process. Closes #2443040
(eg if you want to use them in .session_key)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 02 Aug 2012 10:09:11 +0200] rev 8510
[test rql completion] dont limit number of completion, else we've impredicable results. Also should tell rql.parse to not print error on stdout
This repairs test introduced by dcd9bc1d1bca which closes #2439846
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 01 Aug 2012 10:47:27 +0200] rev 8509
[entity] fix deprecation warnings (closes #2423719)
David Douard <david.douard@logilab.fr> [Thu, 02 Aug 2012 12:48:31 +0200] rev 8508
merge oldstable in stable