Mon, 17 Jun 2019 10:37:32 +0200 [pkg] Remove explicit Depends on Python packages for python3-cubicweb
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 17 Jun 2019 10:37:32 +0200] rev 12652
[pkg] Remove explicit Depends on Python packages for python3-cubicweb As suggested by Denis Laxalde, we can let pybuild generate the list of Depends from the egg requirements. The list we get is slightly less specific in terms of needed versions, but given the age of the previous ones, it's unlikely to cause issues. Also we lose python3-six from the list… which is correct as it was removed from the dependencies in 26744ad37953.
Mon, 10 Jun 2019 12:04:39 +0200 [pkg] Fix spelling mistake in doc-base abstract
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 12:04:39 +0200] rev 12651
[pkg] Fix spelling mistake in doc-base abstract
Mon, 10 Jun 2019 12:04:11 +0200 [pkg] Fix doc-base section
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 12:04:11 +0200] rev 12650
[pkg] Fix doc-base section As pointed by Lintian, the “Apps” section is only used in menu, not in doc-base. We can just remove it.
Mon, 10 Jun 2019 11:25:24 +0200 [pkg] Use “dependency package” instead of “virtual package” to describe python3-cubicweb-postgresql-support
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 11:25:24 +0200] rev 12649
[pkg] Use “dependency package” instead of “virtual package” to describe python3-cubicweb-postgresql-support The term “virtual” was too imprecise and is not accepted for empty packages by Lintian anymore.
Mon, 10 Jun 2019 11:15:17 +0200 [pkg] Move lintian-overrides file to debian/source directory
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 11:15:17 +0200] rev 12648
[pkg] Move lintian-overrides file to debian/source directory Just use the now preferred location.
Mon, 10 Jun 2019 11:13:06 +0200 [pkg] Stop using /etc/bash_completion.d
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 11:13:06 +0200] rev 12647
[pkg] Stop using /etc/bash_completion.d cubicweb-ctl shipped an empty /etc/bash_completion.d as a leftover of shipping a bash completion script. As pointed by Lintian, this directory is not obsolete, so let's get rid of it for good.
Thu, 13 Jun 2019 16:47:47 +0200 [pkg] Tidy substvars usage in control file
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Thu, 13 Jun 2019 16:47:47 +0200] rev 12646
[pkg] Tidy substvars usage in control file The documentation package was missing a Built-Using field to record the provenance of the templates. Empty packages or meta packages do not require Depends on a specific Python version, so we can remove the relevant substvars.
Mon, 10 Jun 2019 10:53:48 +0200 [pkg] Specify priority “optional” instead of the obsolete “extra”
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 10:53:48 +0200] rev 12645
[pkg] Specify priority “optional” instead of the obsolete “extra” Quoting Lintian, “Since Debian Policy version 4.0.1, the priority extra has been deprecated.” So let's use “optional” instead.
Mon, 10 Jun 2019 10:51:31 +0200 [pkg] Remove build dependency on dh-systemd
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 10:51:31 +0200] rev 12644
[pkg] Remove build dependency on dh-systemd As suggested by Lintian, remove build dependency on obsolete package dh-systemd. Instead, specify a more precise version of debhelper 9 that added support for systemd.
Wed, 05 Jun 2019 18:35:51 +0200 [pkg] Run test suite as part of autopkgtest
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Wed, 05 Jun 2019 18:35:51 +0200] rev 12643
[pkg] Run test suite as part of autopkgtest Add support for autopkgtest. The test “unittest” will run the test suite using pytest. As we need PostgreSQL in the test environment and open network connection, the test is marked with `isolation-container` and requires at least LXC to be run, e.g: autopkgtest -s -- lxc -s autopkgtest-sid
Wed, 05 Jun 2019 16:29:04 +0200 [pkg] Switch to Debian source format 3.0 (quilt)
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Wed, 05 Jun 2019 16:29:04 +0200] rev 12642
[pkg] Switch to Debian source format 3.0 (quilt) This forces us to base the Debian package on the source of the Python package (as produced by running `python3 setup.py sdist`). While it might seem cumbersome, this greatly reduces likelyhood of mismatch between an installation via `pip` and one using the Debian package. `dpkg-source` will also document for us what is currently in the source repository but not in the Python package. Currently the missing file are: PKG-INFO cubicweb/sobjects/test/data/cubicweb_comment/schema.py cubicweb/sobjects/test/data/cubicweb_comment/__init__.py cubicweb/sobjects/test/data/cubicweb_comment/__pkginfo__.py cubicweb/sobjects/test/data/cubicweb_card/schema.py cubicweb/sobjects/test/data/cubicweb_card/entities.py cubicweb/sobjects/test/data/cubicweb_card/__init__.py cubicweb/sobjects/test/data/cubicweb_card/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_comment/schema.py cubicweb/server/test/data-migractions/cubicweb_comment/__init__.py cubicweb/server/test/data-migractions/cubicweb_comment/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_localperms/schema.py cubicweb/server/test/data-migractions/cubicweb_localperms/__init__.py cubicweb/server/test/data-migractions/cubicweb_localperms/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_basket/schema.py cubicweb/server/test/data-migractions/cubicweb_basket/__init__.py cubicweb/server/test/data-migractions/cubicweb_basket/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/__pkginfo__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/schema.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/__init__.py cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_tag/schema.py cubicweb/server/test/data-migractions/cubicweb_tag/__init__.py cubicweb/server/test/data-migractions/cubicweb_tag/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_card/schema.py cubicweb/server/test/data-migractions/cubicweb_card/__init__.py cubicweb/server/test/data-migractions/cubicweb_card/__pkginfo__.py cubicweb/server/test/data-migractions/cubicweb_file/schema.py cubicweb/server/test/data-migractions/cubicweb_file/__init__.py cubicweb/server/test/data-migractions/cubicweb_file/__pkginfo__.py cubicweb/test/data-rewrite/cubicweb_localperms/schema.py cubicweb/test/data-rewrite/cubicweb_localperms/__init__.py cubicweb/test/data-rewrite/cubicweb_localperms/__pkginfo__.py cubicweb/test/data-rewrite/cubicweb_card/schema.py cubicweb/test/data-rewrite/cubicweb_card/entities.py cubicweb/test/data-rewrite/cubicweb_card/__init__.py cubicweb/test/data-rewrite/cubicweb_card/__pkginfo__.py The current manifest will duplicate several files that are stored as symlinks in the Mercurial repository, hence the long list of ignored files in `extend-diff-ignore`.
Wed, 05 Jun 2019 15:38:29 +0200 [pkg] Switch all Debian packages to Python 3
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Wed, 05 Jun 2019 15:38:29 +0200] rev 12641
[pkg] Switch all Debian packages to Python 3
Tue, 11 Jun 2019 09:40:12 +0200 Fix sorting key for rdefs in schema viewer
julien tayon <julien.tayon@logilab.fr> [Tue, 11 Jun 2019 09:40:12 +0200] rev 12640
Fix sorting key for rdefs in schema viewer With changeset 234ca3cbbb46, clicking in the schema of an entity with cubicweb in py3 on "vue en boite" will probably result in an infinite spinner (which implies cw > 3.26) What happened ? This "vue en boite" used to work at least until... hg diff -c a8c1ea390400 cubicweb/schema.py @@ -993,10 +992,6 @@ class CubicWebRelationSchema(PermissionM return False return True - @deprecated('use .rdef(subjtype, objtype).role_cardinality(role)') - def cardinality(self, subjtype, objtype, target): - return self.rdef(subjtype, objtype).role_cardinality(target) - class CubicWebSchema(Schema): """set of entities and relations schema defining the possible data sets But, wait ... If I open a shell on an instance of cw 3.24 something seems off >>> list(schema['CWUniqueTogetherConstraint'].relation_definitions())[0][0].cardinality # <bound method CubicWebRelationSchema.wrapped of <constraint_of [CWUniqueTogetherConstraint,CWEType]>> We have been sorting on a method the whole time ? Is it possible what were the effects ? 1) We cannot sort function can't we ? >>> def adder(i): return lambda x: x+i >>> sorted(map(adder,range(10))) [<function __main__.<lambda>>, <function __main__.<lambda>>, ... Yes we can. 2) what does it means. >>> { adder(1) : 1 } Out[19]: {<function __main__.<lambda>>: 1} In fact the function object as a __hash__ method (which is practical for making memoizers (cache)), and return truly random results (pseudo random). My take on this patch is relations have NEVER been sorted by cardinality. No one never ever noticed. Hence, I propose to not fix a bug that never was reported.
Tue, 04 Jun 2019 09:35:47 +0200 Flake8 cubicweb/web/schemaviewer.py
julien tayon <julien.tayon@logilab.fr> [Tue, 04 Jun 2019 09:35:47 +0200] rev 12639
Flake8 cubicweb/web/schemaviewer.py
Tue, 04 Jun 2019 09:35:47 +0200 [py3] changing unicode to str
julien tayon <julien.tayon@logilab.fr> [Tue, 04 Jun 2019 09:35:47 +0200] rev 12638
[py3] changing unicode to str py2 support being dropped, passing the code in full py3 str/bytes syntax
Tue, 11 Jun 2019 09:07:24 +0200 [py3] Use sorted(key=...) instead of sorted(cmp=...)
julien tayon <julien.tayon@logilab.fr> [Tue, 11 Jun 2019 09:07:24 +0200] rev 12637
[py3] Use sorted(key=...) instead of sorted(cmp=...)
Fri, 07 Jun 2019 14:56:22 +0200 Merge with 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 07 Jun 2019 14:56:22 +0200] rev 12636
Merge with 3.26
Fri, 07 Jun 2019 14:53:03 +0200 Added tag 3.26.11, debian/3.26.11-1 for changeset 633ca84bea58 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 07 Jun 2019 14:53:03 +0200] rev 12635
Added tag 3.26.11, debian/3.26.11-1 for changeset 633ca84bea58
Fri, 07 Jun 2019 14:52:51 +0200 [pkg] Version 3.26.11 3.26 3.26.11 debian/3.26.11-1
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 07 Jun 2019 14:52:51 +0200] rev 12634
[pkg] Version 3.26.11
Thu, 06 Jun 2019 16:40:14 +0200 Added tag debian/3.26.10-1 for changeset 0ce26fb5ab48 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 06 Jun 2019 16:40:14 +0200] rev 12633
Added tag debian/3.26.10-1 for changeset 0ce26fb5ab48
Thu, 23 May 2019 16:59:57 +0200 [debian] New upstream release 3.26 debian/3.26.10-1
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 May 2019 16:59:57 +0200] rev 12632
[debian] New upstream release
Thu, 23 May 2019 17:24:21 +0200 [debian] Drop override_dh_auto_install about cubicweb-ctl 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 May 2019 17:24:21 +0200] rev 12631
[debian] Drop override_dh_auto_install about cubicweb-ctl The script should be installed normally as it is a setuptools' entry point.
Thu, 23 May 2019 17:25:59 +0200 [debian] Remove test/doc Build-Depends 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 May 2019 17:25:59 +0200] rev 12630
[debian] Remove test/doc Build-Depends We are not actually running tests during package build. (This was disabled for python2, now it is also for python3.) And having these build-depends makes it hard to rebuild the package.
Tue, 28 May 2019 12:35:34 +0200 [fix] parse cube version number without space in them
Laurent Peuch <cortex@worlddomination.be> [Tue, 28 May 2019 12:35:34 +0200] rev 12629
[fix] parse cube version number without space in them
Fri, 24 May 2019 17:09:10 +0200 Install patched yapps for test from an http archive
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 24 May 2019 17:09:10 +0200] rev 12628
Install patched yapps for test from an http archive Instead of git which require git to be installed. Also downloading archive is faster than cloning the repository.
Thu, 28 Mar 2019 11:39:36 +0100 [server/test] make test filename uniques
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 11:39:36 +0100] rev 12627
[server/test] make test filename uniques To avoid these pytest error when collecting the whole test suite: import file mismatch: imported module 'unittest_utils' has this __file__ attribute: cubicweb/cubicweb/server/test/unittest_utils.py which is not the same as the test file we want to collect: cubicweb/cubicweb/test/unittest_utils.py Move cubicweb/server/test/unittest_security.py to cubicweb/server/test/unittest_security.py and cubicweb/test/unittest_utils.py to cubicweb/test/unittest_server_utils.py
Fri, 24 May 2019 16:29:14 +0200 Merge 3.26
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 24 May 2019 16:29:14 +0200] rev 12626
Merge 3.26
Tue, 21 May 2019 10:50:08 +0200 [dataimport] Fix case when extid is text in use_extid_as_cwuri() 3.26
julien tayon <julien.tayon@logilab.fr> [Tue, 21 May 2019 10:50:08 +0200] rev 12625
[dataimport] Fix case when extid is text in use_extid_as_cwuri() Extid can be bytes or text. This avoid AttributeError: 'str' object has no attribute 'decode'
Wed, 22 May 2019 11:34:08 +0200 [doc] fix key used in the hook example
Noe Gaumont <ngaumont@logilab.fr> [Wed, 22 May 2019 11:34:08 +0200] rev 12624
[doc] fix key used in the hook example The hook's regid is check_no_subsidiary_cycle.
Wed, 22 May 2019 11:32:09 +0200 [doc] set_operation has been replaced by add_data
Noe Gaumont <ngaumont@logilab.fr> [Wed, 22 May 2019 11:32:09 +0200] rev 12623
[doc] set_operation has been replaced by add_data See the changelog https://cubicweb.readthedocs.io/en/3.26/changes/changelog/#id14
Wed, 22 May 2019 11:30:52 +0200 [doc] check_cycle is a standard function
Noe Gaumont <ngaumont@logilab.fr> [Wed, 22 May 2019 11:30:52 +0200] rev 12622
[doc] check_cycle is a standard function
Wed, 22 May 2019 11:29:49 +0200 [doc] fix several typos
Noe Gaumont <ngaumont@logilab.fr> [Wed, 22 May 2019 11:29:49 +0200] rev 12621
[doc] fix several typos
Tue, 21 May 2019 10:18:54 +0200 [pkg] make cubicweb[crypto] depends on pycryptodome instead of pycrypto
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 21 May 2019 10:18:54 +0200] rev 12620
[pkg] make cubicweb[crypto] depends on pycryptodome instead of pycrypto pycrypto isn't maintained anymore, the last release 2.6.1 is from 2014. Use the drop-in replacement fork pycryptodome instead. pycryptodome is packaged in debian starting from stretch-backports.
Tue, 21 May 2019 10:18:38 +0200 [crypto] Encode unicode strings in _cypherer()
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 21 May 2019 10:18:38 +0200] rev 12619
[crypto] Encode unicode strings in _cypherer() pycrypto accept both bytes or string but pycryptodome, which will be introduced in next changeset, doesn't accept this. For backward compatibility, encode unicode strings in _cypherer()
Thu, 16 May 2019 14:26:38 +0200 [ldapfeed] FIX: Unique Key violation when synchronizing with LDAPfeed 3.26
julien tayon <julien.tayon@logilab.fr> [Thu, 16 May 2019 14:26:38 +0200] rev 12618
[ldapfeed] FIX: Unique Key violation when synchronizing with LDAPfeed What was happening ================== The bug appears when ldapfeed tries to insert a user while another user exists exists with a different source. Simple use case to reproduce: - create a local user in cubicweb (source=system) - sync with ldap - ldapfeed will stop complaining user already exists. Without next patch the test MUST fail with message: cubicweb/server/sources/native.py:714: UniqueTogetherError The ldapfeed is thus stopped ignoring any further ldap entries. The proposal ============ Prior to this patch, the insertion was trying to create all CWUser with the computed login from eeimporter.extid2eid (method process of DataFeedLDAPAdapter). When a CWUser existed with a different cw_source ("system" for user created with cubicweb for instance), it created a conflict. To avoid collisions, in the extentities_generator method a bypass was added at the insertion layer. Prior to insertion the absence of the computed login is checked on a list of all existing login from a different source. If collision is detected, we skip the ldap record. By short circuiting at the CWUser entity insertion level we also avoid to treat CWGroup and EmailAddress related to this user. Hence ensuring a behaviour that will not break existing instances. (conservative approach: faced with ambiguity better do nothing than guess). An error message is added stating explicitly the conflict.
Fri, 15 Mar 2019 12:12:23 +0100 Skip tests for ldapsource with python >= 3.7 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 15 Mar 2019 12:12:23 +0100] rev 12617
Skip tests for ldapsource with python >= 3.7 Until someone works on fixing these, this should make our CI green again. I tried to use setupModule() to check for python version, but pre_setup_database() is apparently called even when a SkipTest exception is raised there. So handle this in that method. (grafted from 4d68d20427dee4b6751a0f1f5511fec2a04f4782)
Thu, 16 May 2019 17:18:29 +0200 Flake8 crypto module 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 16 May 2019 17:18:29 +0200] rev 12616
Flake8 crypto module
Thu, 16 May 2019 17:17:42 +0200 Make crypto module python3-compatible 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 16 May 2019 17:17:42 +0200] rev 12615
Make crypto module python3-compatible * Remove usage of unicode() and decode the base64-encoded string in encrypt(); * Encode the string received in decrypt() as (I supposed) it should come from the result of encrypt(). Add tests for this module along the way.
Thu, 16 May 2019 04:42:59 +0200 [mod] make ViolatedConstraint actually display useful information
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 04:42:59 +0200] rev 12614
[mod] make ViolatedConstraint actually display useful information Move from: (Pdb++) raise some_exception *** ViolatedConstraint: To: (Pdb++) raise some_exception *** ViolatedConstraint: constraint 'cstr56c2ab4b3154f21d08b067742ce5bd9d' is being violated by the query 'ALTER TABLE cw_Bibliography ADD CONSTRAINT cstr56c2ab4b3154f21d08b067742ce5bd9d CHECK(cw_item_type IN ('journalArticle', 'note', 'book', 'thesis', 'film', 'web page', 'manuscrit', 'tapuscrit'))'. You can run the inverted constraint on the database to list the problematic rows. And save hours of debugging to actually understand what is going on.
Thu, 16 May 2019 09:40:28 +0200 Fix flake8 errors/warnings about import in cubicweb/_exceptions.py
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 16 May 2019 09:40:28 +0200] rev 12613
Fix flake8 errors/warnings about import in cubicweb/_exceptions.py We either ignore errors in case of name re-exports and drop re-exports from old backwards compatibility. We fix the only occurrence of NoSelectableObject being imported from cubicweb in tests and update the import to use lgc instead.
Thu, 16 May 2019 04:47:27 +0200 add comment and # noqa on used import
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 04:47:27 +0200] rev 12612
add comment and # noqa on used import
Thu, 16 May 2019 04:47:10 +0200 remove unused import
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 04:47:10 +0200] rev 12611
remove unused import
Thu, 16 May 2019 02:39:42 +0200 [autopep8] E305 - Expected 2 blank lines after end of function or class
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 02:39:42 +0200] rev 12610
[autopep8] E305 - Expected 2 blank lines after end of function or class
Thu, 16 May 2019 02:39:41 +0200 [autopep8] E303 - Remove extra blank lines
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 02:39:41 +0200] rev 12609
[autopep8] E303 - Remove extra blank lines
Thu, 16 May 2019 02:39:41 +0200 [autopep8] E302 - Add missing 2 blank lines
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 02:39:41 +0200] rev 12608
[autopep8] E302 - Add missing 2 blank lines
Thu, 16 May 2019 02:39:40 +0200 [autopep8] E301 - Add missing blank line
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 02:39:40 +0200] rev 12607
[autopep8] E301 - Add missing blank line
Thu, 16 May 2019 01:23:51 +0200 [enh] display CWConstraint type in its repr
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 01:23:51 +0200] rev 12606
[enh] display CWConstraint type in its repr This will change CWConstraint repr from something like: <Entity CWConstraint 314282 [] at 140127700141904> To: <Entity CWConstraint 314282 of type UniqueConstraint [] at 140127700141904> To help improve debugging UX a little bit.
Thu, 16 May 2019 01:23:51 +0200 [entities] display CWConstraint type in its repr 3.26
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 01:23:51 +0200] rev 12605
[entities] display CWConstraint type in its repr
Wed, 15 May 2019 14:23:19 +0200 [changelog] document pyramid.ini automatic generation
Laurent Peuch <cortex@worlddomination.be> [Wed, 15 May 2019 14:23:19 +0200] rev 12604
[changelog] document pyramid.ini automatic generation
Wed, 15 May 2019 15:50:29 +0200 Flake8 cubicweb/pyramid/test/test_hooks.py
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 15 May 2019 15:50:29 +0200] rev 12603
Flake8 cubicweb/pyramid/test/test_hooks.py
Wed, 15 May 2019 12:06:29 +0200 [pyramid/doc] bad docstring
Laurent Peuch <cortex@worlddomination.be> [Wed, 15 May 2019 12:06:29 +0200] rev 12602
[pyramid/doc] bad docstring
Wed, 15 May 2019 12:06:15 +0200 [pyramid/misc] remove useless variable
Laurent Peuch <cortex@worlddomination.be> [Wed, 15 May 2019 12:06:15 +0200] rev 12601
[pyramid/misc] remove useless variable
Wed, 15 May 2019 12:05:52 +0200 [pyramid/test] add test for pyramid.ini generation
Laurent Peuch <cortex@worlddomination.be> [Wed, 15 May 2019 12:05:52 +0200] rev 12600
[pyramid/test] add test for pyramid.ini generation
Wed, 15 May 2019 15:44:35 +0200 Added tag 3.26.10 for changeset 74cc5de1ee6c 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 15 May 2019 15:44:35 +0200] rev 12599
Added tag 3.26.10 for changeset 74cc5de1ee6c
Wed, 15 May 2019 15:44:26 +0200 [pkg] Version 3.26.10 3.26 3.26.10
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 15 May 2019 15:44:26 +0200] rev 12598
[pkg] Version 3.26.10
Fri, 10 May 2019 16:07:32 +0200 Move CWSchemaTC to RQLExpressionTC
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 10 May 2019 16:07:32 +0200] rev 12597
Move CWSchemaTC to RQLExpressionTC The test actually doesn't require a cubicweb schema, except for testing EmailAdress which is out of scope of the test (testing RQLExpression.transform_has_permission()). Just move the test in existing RQLExpressionTC inheriting from TestCase and rename the tests to be more explicit.
(0) -10000 -3000 -1000 -300 -100 -56 +56 +100 tip