Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Jun 2016 11:05:31 +0200] rev 11367
[test/hooks] pep8 and unittest.main instead in unittest_hooks.py
Julien Cristau <julien.cristau@logilab.fr> [Mon, 13 Apr 2015 14:34:11 +0200] rev 11366
[hooks/integrity] kill CheckUniqueHook
It's the backend's job.
The noticeable consequence (as can be seen in tests updated here) is that
error message are a bit less user-friendly.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 20 Jun 2016 15:10:24 +0200] rev 11365
[migration] drop identity_relation if it exists
It has been generated erroneously for a while, then fixed but not properly deleted from old
databases.
Don't use IF EXISTS for sqlserver compat.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Jun 2016 14:35:43 +0200] rev 11364
[migration] Reserialize all constraints since yams introduce new JSON serializing format
So we may drop support for older format in yams at some point.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 23 Jun 2016 15:45:30 +0200] rev 11363
[migration] Add IF EXISTS on DROP CONSTRAINT
problem encountered on migration of a legacy database
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 20 Jun 2016 18:00:00 +0200] rev 11362
[schema sync] Rename index when an entity type is renamed
So we may still find them later using their expected name, and avoid collisions.
Closes #13822045
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 17 Jun 2016 13:26:13 +0200] rev 11361
[c-c] Add a command to check database index
List indices expected by the schema but not in the database and vice-versa
Closes #13822027
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Jun 2016 07:57:13 +0200] rev 11360
[sql gen] Control size of index name using an md5 hash
When using concatenation of table and column, we may hit the backend size limit
on index names, which results on truncated name (64 for postgres). Then we may
have conflict or be unable to find expected index on later synchronization
attempt.
This is done by monkeypatching lgdb for now to avoid dependancy problems.
Unique and primary key indices of entity types handling is left to the backend,
as they are not explicitly named.
See https://www.logilab.org/ticket/4789189
Closes #13821949
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 20 Jun 2016 17:59:43 +0200] rev 11359
[sql gen] Explicitly name unique index
This patch hotfix logilab database for https://www.logilab.org/6662663 and fix
database creation to stop using UNIQUE in the table schema but rather create the
index later on, so its name is under control.
Also consider this change in schema synchronization hooks.
This is preliminary work related to #13822045
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Jun 2016 17:13:10 +0200] rev 11358
Update to yams 0.44 API
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 20 Jun 2016 17:56:49 +0200] rev 11357
[test] Fix randomness in tests
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Jun 2016 07:56:51 +0200] rev 11356
[test] Drop unused import
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 22 Jun 2016 11:38:53 +0200] rev 11355
[serverctl] allow to sync multiple and all sources in source-sync command
Breaking change: by default source are not synced anymore if it is fresh
(regards to synchronization-interval). To get the previous behavior an option
--force is added.
Closes #13886467
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Jun 2016 15:57:17 +0200] rev 11354
[tox] Split migractions tests from server environment
These are the longest tests in this environment, so running them apart (in
parallel of others) would hopefully speed up the whole suite.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 23 Jun 2016 10:24:11 +0200] rev 11353
[dataimport] Fix rdef loopup in importer
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Jun 2016 16:23:11 +0200] rev 11352
[py3k] left-over unicode() in authobjs.py
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 10 May 2016 16:09:34 +0200] rev 11351
[server] Improve massive deletion of entities
sqlserver is limited on the "IN" array size and produce an error "The query
processor ran out of internal resources and could not produce a query plan".
The exact limitation is unclear but can occur with > 10000 item in the array.
See https://support.microsoft.com/en-us/kb/288095
Now we process the deletion by batch of 10000, some quick benchmarks show that
there is no performance impact:
delete_in(50000): 46.765182972
delete_in_batch(50000): 46.3242430687
delete_in(100000): 62.2969429493
delete_in_batch(100000): 61.8402349949
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 06 Jun 2016 15:18:12 +0200] rev 11350
[hooks] Add a bunch of tests for session synchronization
And change unicode into six.text_type in authobjs.py spotted by new tests.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 06 Jun 2016 15:17:23 +0200] rev 11349
[entities] Drop very old backward compat
from erudi time (even the standard datetime type didn't exist at that time)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 06 Jun 2016 15:28:35 +0200] rev 11348
pep8 + docstrings and comments improvments
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 06 Jun 2016 21:17:33 +0200] rev 11347
[server] some pep8 in rql2sql
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Jun 2016 17:51:11 +0200] rev 11346
[dataimport] Deprecate SQLGenObjectStore
Closes #10338709.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 18 Feb 2016 17:51:12 +0100] rev 11345
[datafeed] attempt to acquire synchronization lock even when force is given
instead of the implementation in e717da3dc164, raise an error if the lock is
already grabbed and catch this error in the caller.
See discussion on https://www.cubicweb.org/revision/10790765
Closes #10451635
Philippe Pepiot <philippe.pepiot@logilab.fr> [Mon, 30 May 2016 17:41:12 +0200] rev 11344
[schema] Cache RQL expressions on schema loading
Add a mapping rql string to rql statement
Deserializing schema is ~36% faster with a lot (> 4000) expressions like those
generated by cubicweb-container.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 07 Jun 2016 12:04:21 +0200] rev 11343
[schema] Avoid parsing RQL expressions twice on schema loading
Kill full_rql (unnecessary)
Use snippet_rql rather than rqlst when possible
Don't access to rqlst cachedproperty from __init__
Deserializing schema is ~40% faster with a lot (> 4000) expressions like those
generated by cubicweb-container.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Jun 2016 10:22:37 +0200] rev 11342
[dataimport] Handle Bytes data in ExtEntity and convert them to Binary
Closes #13887276.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Jun 2016 18:11:40 +0200] rev 11341
[test] Avoid assertCountEqual in unittest_syncschema.py
It's not clear why this happens, but it seems that assertCountEqual does
strange things with unittest2 on Python 2 for equality comparison (trying to
sort constraint objects, even though BaseConstraint raise NotImplemented in
__lt__ from Yams 0.43).
So just avoid using it to get this test passing.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Jun 2016 11:01:16 +0200] rev 11340
[packaging] Bump version number
David Douard <david.douard@logilab.fr> [Mon, 29 Feb 2016 17:07:56 +0100] rev 11339
[web/session] make sure not to modify an inner value of session.data (closes #11217958)
When we modify a mutable value stored in the session's data (dict-like object)
we prevent an alternative session data handler (eg. pyramid-redis-session)
from detecting this update and synchronizing it in its backend (like redis).
David Douard <david.douard@logilab.fr> [Fri, 19 Feb 2016 12:11:31 +0100] rev 11338
[book] improve a bit the documentation of the database setup
also remove the MySQL section.
Alexandre Richardson <alexandre.richardson@logilab.fr> [Tue, 22 Dec 2015 11:26:49 +0100] rev 11337
[doc] add documentation for specializing translation of other cubes in an application cube
Arthur Lutz <arthur.lutz@logilab.fr> [Fri, 21 Aug 2015 11:25:50 +0200] rev 11336
[doc] fix some URLs (cs to test jenkins autobuild )
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 26 May 2016 15:37:28 +0200] rev 11335
[uicfg] Fix typo in set_fields_order
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 23 May 2016 17:40:31 +0200] rev 11334
[forms] We don't want cwjs-edition-cancel class on reledit's cancel button
Else it's bound to a js function that collides with onclick provided by reledit
code.
Closes #13120795
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 21 Jun 2016 13:49:32 +0200] rev 11333
[test] Prefer unittest.main
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 21 Jun 2016 13:49:15 +0200] rev 11332
[test] py.test related fix
We ought not import a concrete test case from a sibling module, else it ends up
partially initialized at some point and later raise assertion error in
setUpClass.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 02 Feb 2016 12:08:49 +0100] rev 11331
[dataimport] add a bit of extra-documentation on the massive store
about prepare_insert_relation limitation on inlined relation and lack of
full-text indexation.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 29 Jan 2016 18:57:30 +0100] rev 11330
[dataimport] no need to call .keys()
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 01 Feb 2016 17:50:05 +0100] rev 11329
[dataimport] drop massive store's flush_metadata method
This method handle a temporary table which sounds useless, and even buggy in
some cases (metadata for a single entity types will be only flushed once even if
flush is called several time). Instead, simply call the method-doing-the job
after entities have been inserted (and make it private along the way).
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 02 Feb 2016 12:10:42 +0100] rev 11328
[dataimport] test and fix external source support for the massive store
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 21 Jun 2016 13:51:19 +0200] rev 11327
[dataimport] add new test for nohook store importing in a custom source
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 01 Feb 2016 17:29:59 +0100] rev 11326
[dataimport] introduce usage of MetadataGenerator into the massive store
This allows more flexibility and code sharing w/ nohook store.
Closes #10338621
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 18:14:27 +0100] rev 11325
[dataimport] rename massive store's metagen_push_relation method
to _insert_meta_relation.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 18:14:55 +0100] rev 11324
[dataimport] meta_data -> metadata
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 16:08:08 +0100] rev 11323
[dataimport] use sql shortcut
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 18:16:47 +0100] rev 11322
[dataimport] move cwmassive_constraint temporary table handling to the PGHelper class
with consistent renaming and some rationalization to avoid doing things several
times and have code slightly easier to grasp.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 18:17:08 +0100] rev 11321
[dataimport] inline some methods of the massive store
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 15:25:32 +0100] rev 11320
[dataimport] move everything related to the "URI handling" feature of the massive store together
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 15:13:39 +0100] rev 11319
[dataimport] test for a value is in a set and insertion in a set should live together
also inline some methods on the way, in the hope to make the public api clearer
at some point, and only put valuable values in those sets so we don't have to
endlessly test for consistency.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 15:08:16 +0100] rev 11318
[dataimport] use a single _initialized set instead of _entities / _rtypes
and rework a bit methods using them so that 'in' test and set insertion leave in
the same method.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 14:34:47 +0100] rev 11317
[dataimport] drop massive store etype to eid index
and fix potential problem with is_instance_of relation insertion in case where
the class of inserted entity has some (yams) parent.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 14:00:50 +0100] rev 11316
[dataimport] add a .schema shortcut attribute on the massive store
also rephrase a bit a method along the way
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 13:41:39 +0100] rev 11315
[dataimport] rework massive store's __init__
* _cnx is set by the parent class
* count_cwuri is not used
* group related things together
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 18:18:20 +0100] rev 11314
[dataimport] rework PGHelper class
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 18:18:44 +0100] rev 11313
[dataimport] flake8
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 14:02:31 +0100] rev 11312
[dataimport] enhance a bit sql queries readability
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 14:14:57 +0100] rev 11311
[dataimport] use IF EXISTS when possible
it's better than try/except and avoid potential concurrency problems.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 11:32:12 +0100] rev 11310
[dataimport] PGHelper should be responsible to retrieve the database schema
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 01 Feb 2016 17:31:35 +0100] rev 11309
[dataimport] introduce a new MetadataGenerator to replace former MetaGenerator
with a similar-but-different API that will allow its usage by the massive store
(no more entity object manipulation), while making it a bit more flexible for
customization by subclasses (experience taken from client code).
Related to #10338621
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 21 Jun 2016 16:37:17 +0200] rev 11308
[dataimport] Prefer now(pytz.utc) to utcnow
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 29 Jan 2016 15:08:13 +0100] rev 11307
[dataimport] rename nohook store .source attribute
so it's clearly not the samething as metagenerator.source. Also add a bit of doc
along the way.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 28 Jan 2016 11:17:31 +0100] rev 11306
[dataimport] make rql store test easier to read and test a few more thing, then reuse it to test nohook start which had no tests at all
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 27 Jan 2016 21:59:34 +0100] rev 11305
[dataimport] remove useless assignment in massive store
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 27 Jan 2016 08:42:28 +0100] rev 11304
[dataimport] move eid attribution from the metagenerator back to the nohook store
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 27 Jan 2016 08:38:04 +0100] rev 11303
[dataimport] rephrase minor bits of the meta generator
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Jun 2016 15:25:36 +0200] rev 11302
[pkg] Depends on logilab-common >= 1.2.2
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Jun 2016 16:35:21 +0200] rev 11301
Merge with 3.22.3
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Jun 2016 14:13:54 +0200] rev 11300
[pkg] Depends on yams >= 0.43
RPM spec file and debian/control got updated previously.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Jun 2016 16:21:07 +0200] rev 11299
Added tag 3.22.3, debian/3.22.3-1, centos/3.22.3-1 for changeset b1e7de000536
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Jun 2016 15:32:51 +0200] rev 11298
[pkg] Version 3.22.3
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Jun 2016 13:45:12 +0200] rev 11297
[pkg] Depends on yams < 0.43
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 01 Jun 2016 15:17:09 +0200] rev 11296
Define BASE_URL and DATA_URL js variables in the login template. Closes #13385185
Those are expected to be defined in almost every js files. They were not before
this patch because login form doesn't use the regular main template.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Jun 2016 13:21:31 +0200] rev 11295
[web] Remove some unused imports in editforms
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Jun 2016 13:21:13 +0200] rev 11294
Fix cancel action on deletion confirmation form
Currently crashed with RequestError: invalid action '__action_cancel'.
It's broken as of https://hg.logilab.org/master/cubicweb/rev/cb217b2b3
This fix is similar as the one done in
https://hg.logilab.org/master/cubicweb/rev/9f1c89e7426d
Closes #13521493
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 06 Jun 2016 21:19:04 +0200] rev 11293
[rql2sql] Test and fix some case of sql generation
when an unstable variable (ie whose type change from one solution to another) is
used in an EXISTS node but belongs to an outer scope.
Closes #13518646.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Jun 2016 13:22:00 +0200] rev 11292
[test] Add missing os import in unittest_migractions.py
Dropped in ^ merge.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 20 Jun 2016 15:04:14 +0200] rev 11291
backport 3.22 changes
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 15 Apr 2016 10:20:34 +0200] rev 11290
[entity] Make it possible to specify sorting terms in cw_related_rqlst method
Closes #12306543.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 16 Jun 2016 17:45:16 +0200] rev 11289
[sql gen] Properly create UNIQUE index on non string column. Closes #13728492
Unique was previously detected in a loop triggered only for String columns.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 17 Jun 2016 14:44:59 +0200] rev 11288
[server] some pep8 changes
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 16 Jun 2016 17:35:39 +0200] rev 11287
pep8 schema2sql
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 02 Jun 2016 17:52:43 +0200] rev 11286
[migration] Drop custom "readfunc" for code.interact in shell
As the referenced bug http://bugs.python.org/issue1288615 got fixed in Python
2.6, this is no longer needed. Furthermore the implementation is not Python 3
compatible (raw_input, unicode).
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 02 Jun 2016 09:41:24 +0200] rev 11285
[tox] Put development dependencies into a dev-requirements.txt file
The latter being sourced in tox.ini.
For now this contains references to hg repositories for some dependencies but
under normal circumstances it should only contain pytest.
This is useful when developping cubicweb itself without using tox but working
with a virtualenv so that one can simply do:
::
$ virtualenv --system-site-packages venv
$ . venv/bin/activate
$ pip install -r dev-requirements.txt
$ python setup.py develop
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 02 Jun 2016 10:27:34 +0200] rev 11284
[py3k] Fix config-level comparison in "cubicweb-ctl create" command
dict.get -> None, and None cannot compare to an int in Python 3.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Jun 2016 09:19:38 +0200] rev 11283
[pkg] PEP8 fixes in __pkginfo__.py
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Jun 2016 09:17:06 +0200] rev 11282
[pkg] Drop "support" of unused subpackage_of option in setup.py
__pkginfo__ does not declare subpackage_of.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 16 Jun 2016 17:09:11 +0200] rev 11281
Add missing import, eaten by previous merge
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 01 Jun 2016 17:05:16 +0200] rev 11280
Only access once to _cw.message in the login form
else the first access may pop the message and the second won't get anything to
display. This works on default message implementation but doesn't on the
pyramid's one, leading to no message displayed on erroneous authentication
attempt, which is not very user friendly.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 16 Jun 2016 15:53:01 +0200] rev 11279
backport 3.22 changes
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 16 Jun 2016 14:19:20 +0200] rev 11278
backport changes from 3.21
Alexandre Richardson <alexandre.richardson@logilab.fr> [Fri, 10 Jun 2016 16:45:20 +0200] rev 11277
[server,bfss] fix bfss migration test for python 3 (related #13519541)
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 10 Jun 2016 13:23:54 +0200] rev 11276
[pkg] Use io.open with utf-8 encoding to read long description from README
This forces decoding so that this is consistent between Python 2 and 3 as, in
Python 3, decoding which would occur anyways and may fail depending on the
environment locale settings.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Wed, 04 May 2016 23:52:36 +0200] rev 11275
[dataimport] order of ExtEntities should be irrelevant (closes #13117472)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 01 Jun 2016 15:36:18 +0200] rev 11274
Test and fix "pickleability" of Binary objects
which has been recently broken while some cubes rely on this (eg fastimport).
Do some licensing/pep8 cleanup along the way.
Closes #13385274
Alexandre Richardson <alexandre.richardson@logilab.fr> [Tue, 07 Jun 2016 10:05:30 +0200] rev 11273
[server,bfss] fix storage migration when Bytes attributes is None (closes #13519541)
When a Bytes attributes is None before the BFSS storage migration,
the migration crashes. A Bytes attribute can be None, when the attribute
is not required and there is no default value. In this case, the attributes
should remained None after migration and no file is stored on the disk.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 25 May 2016 09:51:51 +0200] rev 11272
Let hg Ignore py.test's .cache directory
And drop rule for .svn along the way.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 15 Apr 2016 08:59:53 +0200] rev 11271
[entity] Add a cw_related_rqlst method returning the RQL select node of cw_related method
This is useful if one wants to modify the query before execution.
A bit a PEP8 style fix in tests along the way.
Related to #12306543.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 20 May 2016 17:05:39 +0200] rev 11270
[devtools] set .config in setUpClass instead of using a cache in a classproperty
This is much clearer and avoid problem with py.test introspection that triggered
creation and caching of the configuration before actual test execution. This
caused pb in unittest_postgres.PostgresStatementTimeoutTC where configuration
was built before module's setup, hence source configuration was missing
information about where to find the pg cluster.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 20 May 2016 12:01:42 +0200] rev 11269
[devtools] Simplify test configuration's init
Specify module's __file__ instead of apphome. __file__ is saved on the class as
it will be used later (eg to find the proper pg cluster without relying on
shared dictionnary modifications).
This will require some tests update, but it should be less common in cubes than
in cubicweb itself.
Rémi Cardona <remi.cardona@logilab.fr> [Thu, 11 Sep 2014 14:22:02 +0200] rev 11268
[web] Have the LoginController return 403 on failed auth (closes #11569950)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 20 May 2016 11:32:23 +0200] rev 11267
[devtools] Drop old init_test_database backward compat
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 20 May 2016 14:43:19 +0200] rev 11266
[devtools] show DeprecationWarning during test execution
They are not shown by default since python 2.7
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 20 May 2016 11:09:46 +0200] rev 11265
[devtools] deprecate usage of sources file for test
This is old support which clutters the code and should no more be used.
As this is rarely used (if it is) and test only, it feels ok to drop support at
once without a deprecation phase.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 20 May 2016 13:07:21 +0200] rev 11264
[devtools] Set dumb value for postgres's db-host to avoid unexpected connection to a local server
Currently, if something goes wrong (eg config built before call to
startpgcluster) while a pg server is running on localhost, it may connect to
this server and run the test in there unexepectedly.
David Douard <david.douard@logilab.fr> [Wed, 25 May 2016 17:19:14 +0200] rev 11263
[ldapfeed] ldap3 do not raise an exception in case of failure of cnx.bind()
but return 'False' instead.
David Douard <david.douard@logilab.fr> [Wed, 25 May 2016 17:43:53 +0200] rev 11262
[test] add a test to ensure we get an AuthenticationError with ldapfeed
when using (correct login, wrong password) credentials
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 22 Apr 2016 16:16:09 +0200] rev 11261
[entity] Exclude computed relations from Entity.copy_relations
Closes #12481591.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 19 May 2016 10:51:33 +0200] rev 11260
[pkg] Set version to 3.22.2.dev0
So that cubes used in test dependencies do not install a released CubicWeb.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 20 May 2016 12:05:29 +0200] rev 11259
[devtools] pep8 a bit package's __init__
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 19 May 2016 17:57:43 +0200] rev 11258
[test/server] Only use configcls with statement timeout when needed
Other tests in PostgresFTITC class apparently do not make use of this
particular configuration.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 19 May 2016 17:55:26 +0200] rev 11257
[server/test] Add an assertion in test_statement_timeout
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 01 Jul 2015 08:58:39 +0200] rev 11256
[datafeed] minor cleanups to cwxml parser
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 23 Sep 2015 10:59:56 +0200] rev 11255
[datafeed] don't allow arbitrary kwargs on DatafeedParser initializer
else they will be handled nicely by appobject base class, while we rather want an
error in the case of a source parser (arguable).
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 01 Jul 2015 08:53:29 +0200] rev 11254
[datafeed] gives information about moved entities to the parser
Also, don't support anymore arbitrary parameters at parser initialization.
Related to #5414754
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 01 Jul 2015 08:45:29 +0200] rev 11253
[datafeed] simplify SQL query used to retrieve information about entities from an external source
no need to join on cw_source
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 01 Jul 2015 08:42:44 +0200] rev 11252
[datafeed] rename parser.sourceuris to source_uris
Its more readable. Also, uniformize related method and local identifier names.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 30 Jun 2015 10:05:46 +0200] rev 11251
[datafeed] move process_urls to the parser
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Jan 2016 17:14:16 +0100] rev 11250
[tox] Use py.test to run tests
In unittest_rqlrewrite.py and repotest.py, rename utility functions so that
they are not considered as "test functions" by py.test.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 19 May 2016 14:21:21 +0200] rev 11249
[test] Fix devtools unittest_i18n when ran without pytest
There is currently some weird error, requiring both to hack cubicweb.__path__
and to stop using load_module_from_name to load the registry.
Introduce a dependency on to-be-released version of logilab common integrating
fix for https://www.logilab.org/ticket/6085650
Do some extra import cleanups along the way.
Julien Cristau <julien.cristau@logilab.fr> [Fri, 05 Feb 2016 14:48:23 +0100] rev 11248
[server] explicitly set postgres LC_MESSAGES variable to C on connection
We parse some error messages so we need them to be in English. It's not
clear to me exactly when that's not the case, but this fixes running
unittest_postgres' "test_constraint_validationerror" with py.test for
Sylvain.
Julien Cristau <julien.cristau@logilab.fr> [Thu, 19 Mar 2015 21:19:52 +0100] rev 11247
[web] cleanup xmlrss view
Don't trigger exceptions unnecessarily, and add line breaks to the
output.
Julien Cristau <julien.cristau@logilab.fr> [Wed, 17 Feb 2016 14:01:35 +0100] rev 11246
[migration] add rollback when replace_eid_sequence_with_eid_numrange fails
If we get here, the current transaction is aborted, so if we are to
assume everything is fine and continue we need to rollback first.
Julien Cristau <julien.cristau@logilab.fr> [Wed, 17 Feb 2016 14:03:56 +0100] rev 11245
[migration] move CWComputedRType later
The ordering in this file is a mess, and things don't actually work this
way (when upgrading from 3.17).
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 19 May 2016 09:18:56 +0200] rev 11244
docstring fix
David Douard <david.douard@logilab.fr> [Tue, 12 Apr 2016 10:35:06 +0200] rev 11243
[cwctl] make cwctl not depends on cubicweb.wsgi (closes #12210063)
cubicweb.wsgi may not be available at all on Debian.
Julien Cristau <julien.cristau@logilab.fr> [Wed, 07 Oct 2015 18:24:49 +0200] rev 11242
[hooks/workflow] pass eids, not entities, from hooks to operations
Passing entity objects around runs the risk of getting out of date data
from caches.
Julien Cristau <julien.cristau@logilab.fr> [Wed, 09 Mar 2016 14:53:33 +0100] rev 11241
[web/httpcache] fix Last-Modified generation
time.mktime takes a time tuple in *local* time. We have an UTC datetime coming
from the last_modified method, which we were interpreting as local time,
leading to hilarity. Use calendar.timegm instead.
Add tests for Last-Modified generation of the 'download' and 'manage'
views.
Florent Cayré <florent.cayre@logilab.fr> [Wed, 04 May 2016 17:07:41 +0200] rev 11240
[forms] Fix edition of TZDatetime attributes
Parse the submitted web form values into a timezone-aware datetime
(by default, UTC) when such an attribute is edited. This is done using
an automatically-selected (by `web.formfield.guess_field`) field named
`TZDatetimeField`.
Closes #12666598.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Mon, 02 May 2016 17:14:43 +0200] rev 11239
[doc] fix abstract and example of data import
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Sun, 01 May 2016 22:00:14 +0200] rev 11238
[doc] fix abstract of data import
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 29 Apr 2016 12:39:08 +0200] rev 11237
[repository] drop remanescence of old multi-sources code
we don't use anymore this inputmap/varmap thing.
David Douard <david.douard@logilab.fr> [Mon, 09 May 2016 17:24:03 +0200] rev 11236
Added tag 3.20.15, debian/3.20.15-1, centos/3.20.15-1 for changeset 636a83e65870
David Douard <david.douard@logilab.fr> [Mon, 09 May 2016 17:05:14 +0200] rev 11235
[pkg] 3.20.15
David Douard <david.douard@logilab.fr> [Wed, 20 Apr 2016 14:43:48 +0200] rev 11234
[views] do not eat the self._cw.message in LogFormView (closes #12421177)
accessing self._cw.message now(?) eat the message, so don't call
"self._cw.message" twice.
David Douard <david.douard@logilab.fr> [Tue, 19 Apr 2016 13:57:12 +0200] rev 11233
[server] make InternalManager.name() return an empty string (closes #12418708)
Otherwise the notification emails sent via an internal_session never honor the
EMAIL.sender-name configuration option.
Julien Cristau <julien.cristau@logilab.fr> [Mon, 21 Mar 2016 17:10:08 +0100] rev 11232
[test/migractions] work around drop_cube not deleting final etypes
Closes #10096736
Julien Cristau <julien.cristau@logilab.fr> [Mon, 21 Mar 2016 17:09:41 +0100] rev 11231
[hooks] deleting a final entity type shouldn't try dropping an sql table
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 05 Apr 2016 09:10:17 +0200] rev 11230
[tox] Use a revision on proper branch for Yams
"default" is not good when some bug fix release suddenly comes out...
Julien Cristau <julien.cristau@logilab.fr> [Tue, 29 Mar 2016 14:35:28 +0200] rev 11229
[webconfig] disable generate-staticdir by default
Its side effects mean it can be inconvenient, and using it requires
manual (web server) config changes anyway, so there's no reason it needs
to be enabled by default.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 21 Mar 2016 15:24:17 +0100] rev 11228
[test] Skip test_deserialization_base (unittest_repository.SchemaDeserialTC)
See ticket #10096736.
Julien Cristau <julien.cristau@logilab.fr> [Tue, 29 Mar 2016 17:00:13 +0200] rev 11227
[devtools] drop unused DumbOrderedDict2 class
Julien Cristau <julien.cristau@logilab.fr> [Tue, 29 Mar 2016 16:56:59 +0200] rev 11226
[devtools] fix sorting in ExecutionPlan._check_permissions on python3
Sort lists instead of dict_items objects to get predictable results.
With this change, unittest_querier.UtilsTC.test_preprocess_security
passes every time instead of once in a blue moon. Closes #11759133.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 21 Mar 2016 13:55:29 +0100] rev 11225
[test] assertItemsEqual → assertCountEqual in unittest_repository.py
Julien Cristau <julien.cristau@logilab.fr> [Thu, 24 Mar 2016 09:43:25 +0100] rev 11224
merge 3.20.14 in 3.21 branch
Julien Cristau <julien.cristau@logilab.fr> [Mon, 21 Mar 2016 18:08:47 +0100] rev 11223
Added tag 3.20.14, debian/3.20.14-1, centos/3.20.14-1 for changeset f66a4895759e
Julien Cristau <julien.cristau@logilab.fr> [Mon, 21 Mar 2016 17:59:40 +0100] rev 11222
[pkg] 3.20.14
Julien Cristau <julien.cristau@logilab.fr> [Mon, 21 Mar 2016 10:53:44 +0100] rev 11221
[tox] use master URL for yams repository
No need to clone from review. This should help get consistent results.
Laura Médioni <laura.medioni@logilab.fr> [Tue, 19 Jan 2016 16:11:16 +0100] rev 11220
[pylint] Avoid invalid-name on schema relation class names
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 20 Jan 2016 08:26:30 +0100] rev 11219
[pylint] more work on the pylint support
* uniformize usage of ClassDef and simplify related import
* don't insert in the ast a python function but an astroid representation of that function
* ignore __pkginfo__ file
* drop attr-rgx, variable-rgx and argument-rgx, put the name in good-names instead
* drop additional-builtins
* add cell_call to the list of methods for which we don't want 'abstract-method'
Laura Médioni <laura.medioni@logilab.fr> [Tue, 19 Jan 2016 14:07:59 +0100] rev 11218
[pylint] remove abstract-method warning
This kind of message is targeted:
"Method 'entity_call' is abstract in class 'EntityView' but is not overridden (abstract-method)"
For now, only "entity_call" and "render_body" are dealt with, the list can be extended.
Laura Médioni <laura.medioni@logilab.fr> [Tue, 19 Jan 2016 11:43:52 +0100] rev 11217
[pylint] upgrade pylintext plugin
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 19 Jan 2016 13:24:44 +0100] rev 11216
update and enhance pylintrc
Julien Cristau <julien.cristau@logilab.fr> [Wed, 16 Mar 2016 11:56:32 +0100] rev 11215
[schema] use json to serialize constraints
Require yams 0.43: constraints are serialized to json, which means we
need to recreate the actual checks in the database on upgrade.
Temporary deps in tox.ini to pull respective changes in yams.
Julien Cristau <julien.cristau@logilab.fr> [Wed, 16 Mar 2016 17:59:10 +0100] rev 11214
[pkg] fix cubicweb.spec syntax
(grafted from 3309ddb970594cd54529f5c205d1ea5b5da4131e)
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 16 Mar 2016 10:06:18 +0100] rev 11213
[pkg] Use Twisted < 16.0.0
We have some test failures with 16.0.0, such as:
- test_put_content (unittest_server.ETwistHTTPTC)
- test_base_url (unittest_httptest.TwistedCWAnonTC)
(grafted from 10c12f31d0fe38c2e8814176fc42bf2ea210efdf)
Julien Cristau <julien.cristau@logilab.fr> [Wed, 16 Mar 2016 17:59:10 +0100] rev 11212
[pkg] fix cubicweb.spec syntax
Julien Cristau <julien.cristau@logilab.fr> [Wed, 16 Mar 2016 15:55:56 +0100] rev 11211
[cwconfig] Use imp.load_source instead of exec() to load site_cubicweb.py from apphome
Lets us return a module object and go back to the previous code in
CubicWebConfiguration._load_site_cubicweb.
Rémi Cardona <remi.cardona@logilab.fr> [Tue, 15 Mar 2016 11:24:51 +0100] rev 11210
[cwconfig] Stop using lgc.modutils to load *config.py and *ctl.py files
Rémi Cardona <remi.cardona@logilab.fr>, Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 16 Mar 2016 13:53:03 +0100] rev 11209
[cwconfig] Stop using lgc.modutils to load site_cubicweb.py files
config.load_site_cubicweb function now takes a list of cubes (instead of
paths) and default to all known cubes.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 16 Mar 2016 11:31:40 +0100] rev 11208
[test] Use a Popen in i18n tests
Instead of check_call, so that we clearly see the failure.
A bit of flake8 along the way.
Vladimir Popescu <vladimir.popescu@logilab.fr> [Tue, 06 May 2014 17:45:37 +0200] rev 11207
[forms] Fix HTableFormRenderer _render_fields method behavior when display_label is False.
Indeed, now the extra <tr><th>...</th></tr> are not inserted anymore unless
display_label is True.
Closes #3811325.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 17 Mar 2015 15:21:29 +0100] rev 11206
[connection] remove a dead counter
Related to #1381328.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 16 Jul 2014 17:34:21 +0200] rev 11205
[session] drop .is_repo_in_memory
This is deader than a dead dog's bone buried down a blind alley off a
dead-end street in a ghost town.
Related to #1381328.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 16 Mar 2016 11:39:24 +0100] rev 11204
[session] drop session-as-a-context-manager
It made little sense in the 3.19 - session-as-cnx-bw-compat era, maybe.
Related to #1381328.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 12 Jun 2014 18:37:29 +0200] rev 11203
[devtools/repotest] use the RepoAccess object
Quite better than playing tricks with the Repo._sessions.
Related to #1381328.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Tue, 01 Jul 2014 18:25:20 +0200] rev 11202
[devtools] adapt stresstester to current APIs
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 16 Mar 2016 12:11:18 +0100] rev 11201
[session] retire session.vreg
Related to #1381328.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 16 Jul 2014 16:26:16 +0200] rev 11200
[session] fix super call in Connection.__init__
The vile hacks in test fixtures are fixed.
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 16 Jul 2014 15:30:16 +0200] rev 11199
[session,repo] remove last trace of "cnxprops"
Related to #1381328.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 16 Mar 2016 10:06:18 +0100] rev 11198
[pkg] Use Twisted < 16.0.0
We have some test failures with 16.0.0, such as:
- test_put_content (unittest_server.ETwistHTTPTC)
- test_base_url (unittest_httptest.TwistedCWAnonTC)
Julien Cristau <julien.cristau@logilab.fr> [Tue, 15 Mar 2016 16:58:50 +0100] rev 11197
[web/views] stop using cwaction='cancel'
It's broken as of https://hg.logilab.org/master/cubicweb/rev/cb217b2b3
Julien Cristau <julien.cristau@logilab.fr> [Wed, 16 Mar 2016 00:42:40 +0100] rev 11196
[test] fix test_printable_value_bytes with current pygments
An empty span was added in
https://bitbucket.org/birkenfeld/pygments-main/commits/164574c13533195a555181a2b9c685fea2470403
Aurelien Campeas <aurelien.campeas@logilab.fr> [Thu, 12 Jun 2014 15:54:44 +0200] rev 11195
[session, repository] deprecate repo.connect and move .close reponsibility to session object
Repository.new_session just returns a plain session object, and
`.connect` (which returns a sessionid) is deprecated.
For .close::
session.close() # done !
The session will bear the responsibility to call the "session_close"
event but that's better than the previous idiom::
repo.close(session.sessionid)
which involves both objects.
Related to #1381328.
Related to #2919309.
Julien Cristau <julien.cristau@logilab.fr> [Wed, 09 Mar 2016 14:11:47 +0100] rev 11194
[web/test] fix typo in doc string
Julien Cristau <julien.cristau@logilab.fr> [Wed, 09 Mar 2016 19:00:09 +0100] rev 11193
[web/httpcache] send weak ETags
There's no way we can provide a strong validator in general (especially
considering how ETags are generated by the current EtagHTTPCacheManager
and EntityHTTPCacheManager). So mark our entity-tags as weak.
Julien Cristau <julien.cristau@logilab.fr> [Fri, 04 Mar 2016 12:17:58 +0100] rev 11192
[server] print backend exception if we fail to execute an sql script
It's more useful to see
could not open extension control file "/usr/share/postgresql/9.4/extension/postgis.control": No such file or directory
rather than merely
-> ERROR, skipping /usr/share/cubicweb/cubes/postgis/schema/_ext.postgres.sql
Julien Cristau <julien.cristau@logilab.fr> [Tue, 15 Mar 2016 14:59:24 +0100] rev 11191
[cwctl] drop unnecessary admincnx call from 'shell'
The connection is done by the migration helper.
Julien Cristau <julien.cristau@logilab.fr> [Mon, 07 Mar 2016 17:51:30 +0100] rev 11190
[serverctl] allow schema-diff when db and fs are not in sync
Aurelien Campeas <aurelien.campeas@logilab.fr> [Wed, 09 Jul 2014 16:33:08 +0200] rev 11189
[cwctl] remove networked remote shell
This was a dbapi leftover.
Related to #3933480.
Julien Cristau <julien.cristau@logilab.fr> [Tue, 15 Mar 2016 14:30:21 +0100] rev 11188
[web/calendar] fix regression in previous changeset
"Enables css customization in CalendarView" was untested, and introduced a crash:
TypeError: not all arguments converted during string formatting
Laura Médioni <laura.medioni@logilab.fr> [Mon, 17 Mar 2014 15:21:47 +0100] rev 11187
Enables css customization in CalendarView
now a custom css class can be set on the calendar div (closes #3654043).
Alexandre Richardson <alexandre.richardson@logilab.fr> [Thu, 17 Sep 2015 12:47:39 +0200] rev 11186
refactor a bit breadcrumbs to ease overriding of the root's display
Julien Cristau <julien.cristau@logilab.fr> [Wed, 14 Jan 2015 13:35:22 +0100] rev 11185
Add migration helper function to delete entity types faster
Bypasses all hooks and (for now) ignores any composite relations.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 14 Mar 2016 15:38:03 +0100] rev 11184
[testlib] Import nocoverage from logilab.common.testlib
This depends on a change in logilab-common 1.2.0
Julien Cristau <julien.cristau@logilab.fr> [Mon, 14 Mar 2016 21:28:44 +0100] rev 11183
[web/test] replace unicode with six.text_type
Some uses of unicode reappeared when merging changes from 3.19.14.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 18 Feb 2016 10:23:05 +0100] rev 11182
[devtools/testlib] Issue a RuntimeError when a generative tests is detected
Otherwise, generative tests *à la logilab-common* in CubicWebTC test cases
would silently not run (at least using logilab.common.pytest runner).
Julien Cristau <julien.cristau@logilab.fr> [Thu, 18 Feb 2016 09:30:58 +0100] rev 11181
[devtools] stop using lgc.testlib.TestCase
It's become incompatible with unittest(2).TestCase due to generative
tests. Just keep the datadir/datapath and assertCountEqual bits in our
BaseTestCase.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 03 Mar 2016 10:25:32 +0100] rev 11180
[test] Replace remaining generative tests by subtests
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 14 Mar 2016 18:15:09 +0100] rev 11179
[tox] Enable all applicable py34 environments
All except etwist.
Comes with a few tricks in tox.ini:
* add ``-e.`` to force installing of cubicweb in development because
dependency cubes would otherwise install cubicweb 3.22 (the latest release),
which is not python3 installable.
* "install" cubes/__init__.py because the file is not installed in
develop mode; maybe this file should be managed by cubes themselves...
Julien Cristau <julien.cristau@logilab.fr> [Wed, 09 Mar 2016 17:01:42 +0100] rev 11178
[migration/3.10] fix AttributeError
'Connection' object has no attribute 'HOOKS_DENY_ALL'
Julien Cristau <julien.cristau@logilab.fr> [Mon, 07 Mar 2016 17:53:20 +0100] rev 11177
[server/sources] Fix authenticate on pre-3.10 database
When migrating from a pre-3.10 database, the CWSource entity type and
cw_source relation type are not known, but authenticate should still
work to be able to add them.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 29 Jan 2016 17:11:17 +0100] rev 11176
[test] Add a test ensuring new cube built from skeleton is flake8-compliant
And make skeleton files actually flake8-compliant henceforth.