Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 30 Mar 2017 10:43:49 +0200] rev 12124
[doc] Add release note about change in uicfg
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 30 Mar 2017 10:37:55 +0200] rev 12123
merge 3.25 heads
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 14:56:04 +0200] rev 12122
[hg] Add generated slapd.conf to hgignore
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 11:17:37 +0200] rev 12121
Fix flake8 errors in unittest_cwctl
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 11:14:53 +0200] rev 12120
[cwctl] Drop 'cubicweb_' prefix when displaying cubes with 'cubicweb-ctl list'
consistently with newcube / create commands. This is an alternate implementation
to backed out changeset fe995d56c949.
Closes #17054738
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 28 Mar 2017 17:12:47 +0200] rev 12119
Fix flake8 errors in unittest_cwconfig
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 10:34:39 +0200] rev 12118
[config] Test loading of ccplugin modules
to ensure ccplugin modules of cube as package aren't loaded twice, once as
`cubicweb_<cube>.ccplugin`, once as `cubes.<cube>.ccplugin`. This test used to
fail until fe995d56c949 has been backout.
It requires calling `cleanup_sys_module` in `CubicWebConfigurationTC.tearDown`
to remove any cube's submodule loaded during tests, so content of `sys.modules`
may be tested.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 10:34:16 +0200] rev 12117
[test] Extract out method-which-is-not-a-method mocking iter_entry_points
to ease reuse and improve readability.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 10:32:24 +0200] rev 12116
[cwconfig] Add a docstring on available_cubes method
a renaming could be better at some point, but that's a start.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 28 Mar 2017 15:03:15 +0200] rev 12115
Backed out changeset fe995d56c949
available_cubes should not strip cubicweb_prefix but return actual package name
for cube as package, since its output is also used to e.g. get ccplugin or
site_cubicweb module name.
Original aim of this set was to fix output of the "cubicweb-ctl list" command.
This will be done by an alternate implementation in a later cset.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Mar 2017 13:29:41 +0200] rev 12114
[hooks] Drop "logstats" hook
It is now useless as its looping task would not run on a web instance because
respective repository has no scheduler.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Mar 2017 11:46:17 +0200] rev 12113
[hooks] Do not register "logstats" if repository has no scheduler
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Mar 2017 11:45:19 +0200] rev 12112
[server] Introduce an `has_scheduler` method on Repository
This is to be used by client application to determine if looping tasks may be
registered in the current process. By checking this, one will avoid the
warning in looping_task method when the repository has no scheduler.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Mar 2017 11:37:31 +0200] rev 12111
[server] Warn instead of failing when a looping task is registered and repo has no scheduler
We should provide a way for client code to detect if they should register the
looping task or not. See next patch for that.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Mar 2017 11:31:02 +0200] rev 12110
[server] Exit quickly when a looping task is registered in maintenance mode
In such cases the repository will not have a scheduler on purpose because the
repository will not be kept running and will quickly shutdown after migration
so that it's undesirable to have looping tasks being executed.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 24 Mar 2017 14:56:48 +0100] rev 12109
[config] Drop unused init_available_cubes method
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 28 Mar 2017 11:26:48 +0200] rev 12108
[doc] Move content of former README.pyramid into relevant modules
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 16:57:05 +0100] rev 12107
Drop README.pyramid.rst file
It has been kept since 3.24 when we merged pyramid-cubicweb and
cubicweb-pyramid repositories into cubicweb's one waiting for someone to move
the information in some canonical place but this never happened and this
information is probably not so useful or already existing elsewhere. So just
drop the file.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 17:22:02 +0100] rev 12106
Make entypo link a true URL in README
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 17:21:37 +0100] rev 12105
Refer to cubicweb.readthedocs.io in README
docs.cubicweb.org contains outdated documentation at the moment (and for quite
some time); until it gets update, refer to the up-to-date documentation on
readthedocs.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Mon, 27 Mar 2017 17:57:27 +0200] rev 12104
[server] don't catch exception from postcommit_event() if we are in test mode
The historic behavior is to hide potential exception occurring in
postcommit_event(). Unfortunately logging statements are hidden by default
during tests and it become very hard to debug. At least raise if we are in test
mode.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 14:18:17 +0100] rev 12103
[pkg] Version 3.25.0rc1
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:36:05 +0100] rev 12102
[tox] Simplify command line to build the doc
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 09:37:51 +0100] rev 12101
[pyramid] Drop warning about pyramid_debugtoolbar not found in debug mode
Some people way want to run a pyramid server in debug mode without the
toolbar. This warning is annoying for them. Others should just install and
*include* the toolbar by hand.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 11:21:39 +0100] rev 12100
[pkg] Add development.ini.tmpl to "cubicweb.pyramid" package data
Otherwise the file is not installed and `cubicweb-ctl create -c pyramid` does
not work.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Mar 2017 10:30:48 +0100] rev 12099
[skeleton] Don't use system site packages in tox environment
As we changed this in cubicweb, there is a consensus that this
is not the best practice so let us change it as well for
skeleton.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:38:10 +0100] rev 12098
[doc] Update "settings" pyramid documentation
Document that without "bwcompat" we can use a development.ini file directly
and add a dedicated section to list configuration options.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:37:04 +0100] rev 12097
[doc] Update the "quickstart" page of pyramid documentation
Again mentioning the two modes of operations and dropping references to prior
implementation.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:34:51 +0100] rev 12096
[doc] Rewrite "pyramid" index page in the book
We drop references to pyramid-cubicweb and cubicweb-pyramid, remaining of the
merge in 3.24. We now mention the two possible operation modes
(with bwcompat being true or false).
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 15:05:04 +0100] rev 12095
[doc] Drop documentation for cubicweb.pyramid.tools module
Which, as documented, mostly consists of internals.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:49:04 +0100] rev 12094
[doc] Drop reference to "make_cubicweb_application" in pyramid doc
This function got renamed into config_from_cwconfig and this is arguably an
internal detail so should not appear in the API documentation.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:06:03 +0100] rev 12093
[doc] Remove trailing whitespaces in doc/book/pyramid/index.rst
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 15:43:20 +0100] rev 12092
[tox] Install "pyramid" dependencies in "doc" environment
Otherwise most of the cubicweb.pyramid API doc fails to build. For this we
skip installation in the "doc" environment and source the new
requirements/doc.txt which will install cubicweb[pyramid], thus pulling
cubicweb plus pyramid's dependencies.
Furthermore this requirements/doc.txt would be useful to build to
documentation on readthedocs.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 07 Mar 2017 13:13:23 +0100] rev 12091
[web/views] fix bad html in deleteconf with show_composite=True
On an entity with no composite an additional item "None" was displayed.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 23 Mar 2017 12:09:59 +0100] rev 12090
[web/views] display unique composite entities in deleteconf
When the entity has two relations to the same composite, display it only once.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Mar 2017 11:47:59 +0100] rev 12089
Really make rqlrewrite flake8 compliant
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 22 Mar 2017 14:18:54 +0100] rev 12088
[pyramid] disable bwcompat by default in PyramidCWTest
To avoid cubicweb exceptions handling.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 17 Mar 2017 10:15:16 +0100] rev 12087
Fix flake8 errors in rqlrewrite.py
Arthur Lutz <arthur.lutz@logilab.fr> [Wed, 01 Mar 2017 18:07:49 +0100] rev 12086
[rqlrewrite/schema] Avoid parsing computed relations for each query
The RQLRelationRewriter is instanciated for each RQL query, it should
avoid parsing computed relations formula by using a cache, which seems rightly
located on the instance's schema.
This brings a *huge* performance boost to some pages on application with a few
computed relations (x4 observed on a client app).
Kudos to Adrien, David and Sylvain.
Closes #17059828
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 22 Mar 2017 17:14:18 +0100] rev 12085
[pkg] Restrict yams version to be less than 0.45.0
This is a backport of 10d3bf220be2 on 3.23 branch
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 13:58:28 +0100] rev 12084
[pyramid] Remove pyramid_debugtoolbar from "pyramid.includes"
Most of the times, the package is not installed (not pulled by
cubicweb[pyramid] nor pyramid itself) in a fresh environment so that first
start of a new instance will fail.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Mar 2017 09:44:53 +0100] rev 12083
[doc] Add some details about rtag derivation and server api cleanup in release notes
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Mar 2017 09:41:19 +0100] rev 12082
[doc] Simplify release notes section
Those are all about backward incompatibilities, keep only one section about that.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 11:35:58 +0100] rev 12081
[doc] Fill release notes for 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 12:13:04 +0100] rev 12080
[devtools] Create "newcube" in current directory by default
Instead of using "cubes path", which in many cases will be something wrong
(like <prefix>/share/cubicweb/cubes) now that cubes are regular Python
packages.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 14:39:22 +0100] rev 12079
[pyramid] Do not register repository.shutdown atexit in test mode
It seems that there already is a special shutdown step for repository in test
mode and pyramid's atexit handler interferes with it leading to assertion
error about 'shutting_down' attribute being True in Repository.shutdown().
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 21 Mar 2017 14:17:26 +0100] rev 12078
[cwconfig] don't rely on _CubeImporter while loading cubes
_CubeImporter can load cube subpackages twice (there is a test for submodules
in cubicweb.test.unittest_cubes.test_no_double_import() but not with a
subpackage).
Since _CubeImporter is for backward compatibility and is supposed to be
deprecated as soon as possible, don't rely on it when loading cube schema or
appobjects and always load the real modname (eg. cubicweb_<cube> if exists else
cubes.<cube>).
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 17:38:43 +0100] rev 12077
Added tag 3.24.7, debian/3.24.7-1, centos/3.24.7-1 for changeset 58f1e8545a77
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 17:04:10 +0100] rev 12076
[pkg] Version 3.24.7
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 16:51:41 +0100] rev 12075
[pkg] Restrict yams version to be less than 0.45.0
Because of reader's API changes x and other subtle but hard to debug changes
in appobjects registration in version 0.45.0.
Closes #17065626.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 17 Mar 2017 16:29:38 +0100] rev 12074
[pkg] Version 3.25.0rc0
Let's make a release candidate version of CubicWeb 3.25.0 (only for the Python
package), in the hope that some issues that we usually discover after release
will be sorted out before.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 11:16:11 +0100] rev 12073
[pyramid] Rename paste app factory to pyramid_main
Making it clearer that this would build a Pyramid application, just in case we
eventually provide other means to create a WSGI application than Pyramid.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 09:08:44 +0100] rev 12072
[tox] Do not use site packages in testenv
This is the normal way of running tox. We used to set this because
some people liked to run tests using packages installed by other
means (i.e. system-wide). Now, there seems to be a consensus that
running tox without site packages is a better idea, in particular
since many of our dependencies are now available as wheels and thus
would install quickly provided one uses a recent pip/virtualenv.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 10:25:04 +0100] rev 12071
[test] Add user-site to PYTHONPATH before installation of new cube in test_newcube_install
Otherwise, setuptools complains that the target installation directory (i.e.
"user site" is not in PYTHONPATH). This is probably because we use a fake HOME
with --user install option. Failure shows up when running tests through tox
without system site packages (see next patch).
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 17 Mar 2017 17:32:04 +0100] rev 12070
[pkg] Depends on yams >= 0.45.0
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 17 Mar 2017 17:31:10 +0100] rev 12069
[pkg] Depends on logilab-common >= 1.4.0
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 10:28:01 +0100] rev 12068
Merge with 3.24 branch
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 09:40:24 +0100] rev 12067
Added tag 3.24.6, debian/3.24.6-1, centos/3.24.6-1 for changeset 4029fb83a67d
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 08:58:25 +0100] rev 12066
[pkg] Version 3.24.6
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 08:57:17 +0100] rev 12065
Merge public heads
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 15 Mar 2017 12:01:14 +0100] rev 12064
[web/views] deleteconf: ignore workflow when displaying composite entities
This hide TrInfo composite entities when deleting an workflowable entity.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Mar 2017 14:06:27 +0100] rev 12063
[rset] Use RQL cache in syntax_tree method
This avoid several unnecessary parsings per HTTP request, since in most case
rset's rql is in the rql cache (since it has just been executed), while yapps
based parsing is known to be slow.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 17 Mar 2017 07:32:48 +0100] rev 12062
[repo] Introduce a clear_caches method on the Querier class
that is called from repository's clear_caches.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 Mar 2017 08:30:27 +0100] rev 12061
[repo] Consistent API for cache clearing
clear_caches, reset_caches, clear_eid_caches are now all named 'clear_caches'
with optional eids/etypes arguments to clear eid specific cache entry,
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Mar 2017 13:09:11 +0100] rev 12060
[repo] Extract rql cache handling to a dedicated class
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 16 Mar 2017 17:25:07 +0100] rev 12059
[sobjects] Fix a trivial flake8 error
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 Mar 2017 08:27:45 +0100] rev 12058
[repo] Drop cache clearing methods from the source interface
Those are actually system source specific.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 Mar 2017 08:04:58 +0100] rev 12057
[repo] Move and rename repo._clear_planning_cache
to make it clearer it's clearing the @cache of source_defs method.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 10:10:44 +0100] rev 12056
[sobjects] Fix flake8 errors in services.py
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 Mar 2017 08:39:51 +0100] rev 12055
[test] Rename BaseQuerierTC._access to BaseQuerierTC.admin_access
so it's consistent with CubicWebTC and avoid access to a protected attribute
which has been exposed by the removal of the 'session' property a few csets
earlier.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 Mar 2017 09:15:32 +0100] rev 12054
[repo] Fix flake8 error
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 09 Mar 2017 16:36:33 +0100] rev 12053
[pyramid] Add a "pyramid" instance configuration type
In a new module 'cubicweb.pyramid.config' we define a "pyramid" instance
configuration type. The noticeable feature of this configuration is that it
manages a 'development.ini' file that gets installed in application home
(along with `.conf` file). This file is templated and includes generated
values for secrets of session and authtk tokens.
This means that we can just call:
pserve etc/cubicweb.d/<appname>/development.ini
or
gunicorn --paste etc/cubicweb.d/<appname>/development.ini -b :8080
just after instance creation to get a pyramid instance running without having
to hack around a 'pyramid.ini' file.
This patch drops 'development.ini' from skeleton and moves it in
cubicweb/pyramid so that it gets installed at instance creation which is more
appropriate than in cube creation.
The new configuration class sets "cubicweb.bwcompat" setting to false so it is
not intended to replace the "all-in-one" configuration type (which would
require a bit more work). This configuration is close to the the 'repository'
configuration type with just a couple of options from WebConfiguration that
are needed for Pyramid (anonymous user/password plus some miscellaneous
options that I'm not so sure are really needed). Note, in particular, that we
do not pull CORS settings to be injected as a WSGI middleware like in
wsgi_application_from_cwconfig() since I believe this should be left as an
end-user responsibility and since this can be defined in a standard way in
paste configuration. This configuration inherits from ServerConfiguration but
registers the same appobjects as WebConfiguration.
In cubicweb.web.request._CubicWebRequestBase, we guard against access to
"uiprops" and "datadir_url" of the config because this new "pyramid" config
does not have these (this does not make sense without bwcompat mode). At some
point, we should either avoid using `cw_request`'s pyramid request attribute
or make cubicweb's web request really independant of existing implementation
and drop these assumptions.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 10 Mar 2017 12:02:41 +0100] rev 12052
[pyramid] Call repository's shutdown method atexit
This way when run through a WSGI server (pserve, gunicorn, etc.) we make sure
that the repository is properly shut down. In particular, this would wait for
threads to terminate (otherwise, they'll be killed).
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Mar 2017 11:13:03 +0100] rev 12051
[querier] Turn repo.querier_cache_key into a private function
of the querier module, only place where it's used.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 14 Mar 2017 10:34:03 +0100] rev 12050
[cleanup] Fix flake8 errors in web/application.py and associated test
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 14 Mar 2017 10:33:24 +0100] rev 12049
[test] Simplify CWTC's init_authentication and assertAuthSuccess
which shouldn't rely on removed .session attribute while it's not necessary and
could be written in a simpler way.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:26:05 +0100] rev 12048
[cleanup] Drop non sense sentence in docstring
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:23:29 +0100] rev 12047
[repo] Drop Session at last
This is not used at all anymore.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:21:22 +0100] rev 12046
Fix flake8 some errors
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:18:51 +0100] rev 12045
[test] Use existing reference to repo_source
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:04:25 +0100] rev 12044
[repo] Drop repo.new_session method
we should not go through Session to create Connection anymore.
This is unofficial API, no backward compat for now.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 14 Mar 2017 11:07:58 +0100] rev 12043
Stop using Session on the repository side
Only expect session on web request, and let the web session/authentication
managers provide them.
Access to cnx.data, which used to return session data, is deprecated: there is
no more access to session data from the repository side, and they should be
access from req.session.data from the web side.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:00:13 +0100] rev 12042
[test] Drop unnecessary call to new_session
This is not unittest, the above call is enough.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:58:25 +0100] rev 12041
[user] Drop ugly hack on CWUser entity class
which should be not necessary anymore, beside two remaining usage in our own
test suite.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:57:13 +0100] rev 12040
[test] Use user_session_cache_key function
to generate cache key.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:52:44 +0100] rev 12039
[session+test] Stop storing / accessing session when it's not necessary
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:46:06 +0100] rev 12038
[devtools] Stop relying on Session to create connection in RepoAccess
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:44:03 +0100] rev 12037
[devtools] Stop using repo.new_session
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:25:35 +0100] rev 12036
[session] Kill support for a 'session_open' hook event
To be consistent with dropping of the 'session_close' event, and also because
this is already not called when using pyramid.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:03:28 +0100] rev 12035
[devtools] Rename FakeSession into FakeConnection
because it is what it is.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 16:55:57 +0100] rev 12034
[cleanup] Drop references to the old internal_session method
dropped a while ago, no need to talk about it in a docstring nor to fake it.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 16:31:08 +0100] rev 12033
[session] Drop unused class
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 16:14:05 +0100] rev 12032
[cleanup] Drop no more used parse_repo_uri function
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 14:07:15 +0100] rev 12031
[server] Fix flake8 error of test/data/hooks.py
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 14:02:31 +0100] rev 12030
[repo] Drop repo.connect backward compat
use new_session instead (introduced in 3.19 iirc)
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 14:01:45 +0100] rev 12029
[session] Drop no more necessary Session.sessionid and Connection.connectionid
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 14:04:26 +0100] rev 12028
[repo] Kill repo._sessions
and with it the need to have a looping task to clean it up, and with that all
the session's timestamping machinery.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:24:40 +0100] rev 12027
[repo] Stop closing session
The only point in "closing" session is to call the `session_close` event. Since
I'm not aware of any application relying on it, I think this is too costly (in
term of code) to maintain and propose to drop it.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 12:07:29 +0100] rev 12026
[views] Stop giving stats / debug information relying on _sessions
This is already broken when using pyramid anyway.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 16:41:10 +0100] rev 12025
[session] Stop relying on _sessions to synchronize living session
by doing what we currently do in pyramid. Also, attempt to synchronize CWUser's
class sounds like a dark corner case handling that should be removed in favor of
short lived user objects (beside it shouldn't occur except during migration).
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 12:01:31 +0100] rev 12024
[test] Drop useless access to repo._sessions
test still succeed afterwards.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 11:27:01 +0100] rev 12023
[repo] Fix flake8 errors in server/__init__.py
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 11:25:24 +0100] rev 12022
[repo] Drop no more used ShuttingDown exception
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 11:55:16 +0100] rev 12021
[repo] Drop _get_session method
it's not actually necessary but holds underlying _sessions dict handling.
Drop backward compat relying on it (which IMO should not be a problem).
Drop import of unused QueryError along the way.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 09 Mar 2017 18:02:16 +0100] rev 12020
[test] Drop call to CubicWebConfiguration.load_cwctl_plugins in unittest_cwctl.py
This is no longer need now that we call load_available_configurations() in the
"list" command (see 5e7282bdf140).
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 09 Mar 2017 16:35:58 +0100] rev 12019
[web] Extract a base class out WebConfiguration
This will be used to build a CubicWebPyramidConfiguration in following
changeset.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 09 Mar 2017 16:41:18 +0100] rev 12018
[tox] Drop reference to removed init_instance.py file in flake8-ok-files.txt
The file got removed in 1b9fd8bda1cd.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 10 Mar 2017 09:39:18 +0100] rev 12017
[web] Put 'use-uicache' option in level 2
So that users do not get prompted with this. Follow-up on c34590161082.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Feb 2017 08:56:38 +0100] rev 12016
[server] Add a "scheduler" command to run repository scheduler
This commands starts the repository scheduler as a standalone process that
should complement a CubicWeb web instance running as a WSGI application.
Added a log message in repository's shutdown method to help testing the
command (i.e. make sure the method is called after the scheduler stopped).
Related to #17057223.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 15:13:44 +0100] rev 12015
[cwconfig] Do not instantiate a repo with a scheduler in repository method
None of the caller of this method need the repository to have a scheduler and
having a scheduler should be something that's explicitly requested.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 14:50:00 +0100] rev 12014
[server] Make cubicweb/server/utils.py flake8-clean
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 14:38:52 +0100] rev 12013
[server] Drop utils's LoopTask and TasksManager classes not used anymore
Related to 17057223.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 13:23:33 +0100] rev 12012
[server] replace repository's tasks manager by a scheduler
Repository() does not accept anymore a 'tasks_manager' argument but rather a
'scheduler' argument which is expected to be an instance of sched.scheduler
class. The drop the _tasks_manager attribute of the repository and adjust all
internal usages of it. In particular, in the 'repo_stats' service we do not
export 'looping_tasks' statistics anymore as there's no way to retrieve this
anymore from a web instance.
Closes #17057223.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 13:21:50 +0100] rev 12011
[server] introduce a scheduler class to run repository "looping tasks"
We just use the sched module from the standard library and introduce a tiny
Python2/3 compatibility layer (more for convenience actually). The "looping"
aspect of tasks (previously in LoopTask class) is re-implemeted as a
`schedule_periodic_task` function. This is a reasonably thin layer as compared
to LoopTask/TasksManager classes. Only the "restart" aspect of LoopTask is no
longer present as I'm not sure it's worth keeping.
The advantage of using this (in addition to eventually dropping our custom
code) is that this scheduler class provides a `run` method that blocks the
process while running tasks in its queue. So we can rely on this to have a
'scheduler' ctl command (see forthcoming patch) that would only run "looping
tasks" without having to implement the "blocking" aspect ourself.
Related to #17057223.
Samuel Trégouët <samuel.tregouet@logilab.fr> [Thu, 16 Feb 2017 11:15:23 +0100] rev 12010
web: add options to ignore css compilation and uicache
Samuel Trégouët <samuel.tregouet@logilab.fr> [Thu, 16 Feb 2017 10:56:45 +0100] rev 12009
[skeleton] call includeme from new cube
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 14:19:20 +0100] rev 12008
[etwist] Do not call repository's start_looping_tasks anymore and warn about this
We are about to drop this method from Repository class and replace it by a
blocking alternative. This is not compatible with how things currently work in
a Twisted server implementation. So do not start repository "looping tasks" in
Twisted server anymore and issue a warning about this.
If someone is interested in restoring the "all-in-one" behavior where the
repository runs within a Twisted server, they may start by implementing
repository looping tasks using a Twisted mechanism such as, e.g.,
http://twistedmatrix.com/documents/current/core/howto/time.html and eventually
provide the repository with a compatible scheduler instance so that is can
register its periodic tasks. At the moment, we lack resources to do this (and
maintain the Twisted server of CubicWeb in general).
Related to #17057223.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 09 Mar 2017 09:16:00 +0100] rev 12007
[test] Flake8-clean and use stdlib unittest in cubicweb/server/test/unittest_utils.py
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 07 Mar 2017 12:08:39 +0100] rev 12006
[web] Don't raise ProcessFormError if there is no value specified
a03376213747 introduced a slight modification in None / empty string values and
with it a regression where an exception is raised on empty values, while we
should simply consider no value is specified and return None.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 07 Mar 2017 11:59:07 +0100] rev 12005
[test] Cleanup imports in unittest_form
Remove unused and reorder, + use bare unittest along the way.
Florent Cayré <florent.cayre@logilab.fr> [Tue, 07 Mar 2017 14:27:09 +0100] rev 12004
Fix log level parameter not taken into account in cwsource log table
An error in the jquery selector of the html widget controlling the log
level was the cause of this bug.
Closes #15772634
(grafted from c9129aae884b476455c8ed1ad802efc3a26503a5)
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 13:49:51 +0100] rev 12003
[pyramid] Drop call to repository's start_looping_tasks method and warn about this
We are about to drop the start_looping_tasks method and running "looping
tasks" along the WSGI application is not a very good idea. So issue a warning
pointing to the forthcoming "scheduler" command.
Related to #17057223.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 15:22:16 +0100] rev 12002
[test] Make unittest_serverctl.py flake8-clean
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 13:15:51 +0100] rev 12001
[wsgi] Drop calls to repo.start_looping_tasks
It's unlikely that these implementations were ever used so we do not bother
with deprecation or a warning. We just drop the call to this method which
should not be called from within a WSGI application.
Related to #17057223.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 15:16:53 +0100] rev 12000
[pyramid] Drop useless "init_instance" module
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 15:01:41 +0100] rev 11999
[server] Drop inexistent "bootstrap" argument in Repository initialization
This is a missing bit from 5de78b6fff2e. Unfortunately this code appears to be
uncovered by our test suite.
David Douard <david.douard@logilab.fr> [Wed, 08 Feb 2017 16:05:00 +0100] rev 11998
[server] fix a typo in a docstring
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Feb 2017 09:18:08 +0100] rev 11997
[ctl] Load available configurations in "cubicweb-ctl list"
Otherwise we rely on associated ctl plugins to be loaded which is arguably orthogonal to
configurations.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 23 Feb 2017 10:59:56 +0100] rev 11996
[web/views] Fix a docstring
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Feb 2017 08:37:39 +0100] rev 11995
[server] Use looping_task method in Repository._prepare_startup()
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 27 Feb 2017 17:13:45 +0100] rev 11994
[skeleton] Drop logging configuration from development.ini
This is actually not useful as logging is already initialized and configure
"somewhere else" where the repository is started.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 27 Feb 2017 14:49:32 +0100] rev 11993
[pyramid] Drop retrieval of auth/session secret in all-in-one.conf
We actually never supported this in cubicweb, but only in pyramid-cubicweb.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 27 Feb 2017 09:06:23 +0100] rev 11992
[cwctl] Recommend 'pyramid' before 'wsgi' when twisted is not available
Not sure anyone ever really used the latter and the former is certainly more
reliable/tested.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 27 Feb 2017 09:05:33 +0100] rev 11991
[cwctl] Drop message about 'the pyramid cube' in "start" command
This is shown when twisted is not importable and we suggest to use 'cubicweb
pyramid <appid>' instead. Since 3.24, cubicweb-pyramid got merge in cubicweb
so drop this reference in the message.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 27 Feb 2017 16:57:59 +0100] rev 11990
[cwconfig] Fix two NameError in load_available_configs()
This comes from a copy-paste in d92d75b17a85.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 27 Feb 2017 08:53:52 +0100] rev 11989
[etwist] Drop try/except around definitions of 'all-in-one' configuration and command handlers
cubicweb.server is no longer conditionally shipped, neither in python package
nor in debian package since 3.24.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 28 Feb 2017 16:55:32 +0100] rev 11988
[server] Call 'server_startup' hooks at the end of repository "bootstrap"
Now that we have guarded all calls to Repository.looping_task() in
'server_startup' hooks we can execute this hooks category at bootstrap step.
This way, repositories running without a tasks manager (i.e. those embedded
into a WSGI application) will have these hooks triggered.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 28 Feb 2017 16:46:16 +0100] rev 11987
[pyramid] Drop module-level cache and cleanup looping tasks in tools
And use a LRU cache over cached_build_user function.
This looping task is problematic because it would not be run from within a
WSGI application which does not have a repository with a tasks manager.
This pulls an explicit dependency on 'repoze.lru' but it's not a big deal
since pyramid already depends on this. RPM spec file not update since it does
not even mention pyramid...
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 28 Feb 2017 16:11:17 +0100] rev 11986
[hooks] Return early in server_startup hooks if the repository has not tasks manager
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 28 Feb 2017 16:05:00 +0100] rev 11985
[server] Only register "clean_sessions" looping tasks if repository has a tasks manager
This prepares for calling Repository's _prepare_startup() in bootstrap() so
that repository instances without a tasks manager running can still have their
'server_startup' hooks triggered (this is particularly useful for BFSS
storages).
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Feb 2017 10:16:17 +0100] rev 11984
[utils] Do not pass a tasks manager to Repository in admincnx()
We do not call repo.start_looping_tasks() for the instantiated repository, so
a tasks manager is useless.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Feb 2017 18:02:33 +0100] rev 11983
[server] Separate repository bootstrap from initialization
Thus we now call 'bootstrap' here and there explicitly and remove call of this
method in Repository.__init__(). This way instantiation of a Repository does
not *implicitly* triggers the "bootstrap" step, which is arguably not a
trivial thing and thus deserves to be independent.
In __init__, set 'shutting_down' attribute to None and then to False in
bootstrap as a mean to indicate that, when initialized, a repository is
neither shutting down nor started (not sure where this is used though).
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Feb 2017 17:51:11 +0100] rev 11982
[server] Also remove tmpdir in case of error during restore database command
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Feb 2017 17:47:18 +0100] rev 11981
[server] Rename Repository's init_cnxset_pool method bootstrap
See the (removed) docstring for a rationale...
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Feb 2017 17:45:50 +0100] rev 11980
[server] Replace server config's init_cnxset_pool attribute by a "bootstrap" parameter in Repository
This 'init_cnxset_pool' class attribute is actually used to control whether a
Repository instance should be "bootstraped" (see Repository.init_cnxset_pool()
for a definition of "bootstrap") or not. I seems clearer to me to have this
controlled by a boolean "bootstrap" initialization parameter in Repository.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Feb 2017 17:38:47 +0100] rev 11979
[server] Drop close/open steps in NativeSQLSource.restore()
The only place where this is called is in
ServerMigrationHelper.restore_database() where config.init_cnxset_pool is set
to False. So these steps appear to be useless.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 07 Feb 2017 10:37:37 +0100] rev 11978
[skel] Fix rpm's .spec file skeleton
It's broken for new-style packages since it doesn't consider (even remove) python packages.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Feb 2017 17:36:11 +0100] rev 11977
[server] Move "starting repository..." message where this actually happens
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Feb 2017 17:34:37 +0100] rev 11976
[server] Initialize Repository without a tasks manager in ServerMigrationHelper.restore_database()
We don't need a tasks manager here I think. Thus instantiate the Repository
from its class directly instead of using config.repository() which set a tasks
manager.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Feb 2017 17:34:12 +0100] rev 11975
[server] Fix a typo in log message in Repository.init_cnxset_pool()
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Feb 2017 09:19:35 +0100] rev 11974
[cwconfig] Issue a warning if a configuration module cannot be loaded
We already do this when loading ctl plugin modules, so make things symmetrical
for config modules.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Feb 2017 09:18:08 +0100] rev 11973
[ctl] Load available configurations in "cubicweb-ctl list"
Otherwise we rely on associated ctl plugins to be loaded which is arguably orthogonal to
configurations.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Feb 2017 08:54:01 +0100] rev 11972
[skeleton] Set cubicweb.bwcompat to False in development.ini
Quite a few things from the default web UI do not work when running the
application through pserve (in particular, data files are not apparently
served). So better disable the "bwcompat" mode until we are sure it works
properly (or it gets dropped ;)).
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Feb 2017 17:41:32 +0100] rev 11971
[pyramid] Use existing repo in PyramidCWTest
We thus do not make use of config_from_cwconfig() and build the configurator
instance by hand prior to include 'cubicweb.pyramid'.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Feb 2017 17:35:16 +0100] rev 11970
[pyramid] Make it possible to setup CubicWeb instance from an existing repo in includeme()
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Feb 2017 17:42:46 +0100] rev 11969
[pyramid] Move loading of pyramid_debugtoolbar later in includeme()
To gather cwconfig and repository instantiations.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Feb 2017 08:54:20 +0100] rev 11968
[skeleton,pyramid] Move pyramid app definition in cubicweb.pyramid module
The application definition is actually not specific to the final "cube" being
bootstrapped from skeleton. This patch thus move the pyramid application
function into cubicweb.pyramid module and let cubicweb register the
"paste.app_factory" entry point (instead of the bootstrapped cube).
Useless call to `config.scan` is dropped along the way.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 10 Feb 2017 17:13:44 +0100] rev 11967
[pyramid] Add a copyright and docstring to all modules
We add copyright statements for both UNLISH (original author) and LOGILAB.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 08 Feb 2017 17:54:16 +0100] rev 11966
[cwconfig] Strip "cubicweb_" prefix from cube name in available_cubes()
Closes #17054738.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 21 Feb 2017 10:12:47 +0100] rev 11965
[web] fix os.rename usage on windows when destination exists
os.rename on windows will raise OSError (or WindowsError subclass) when if
destination file already exists.
Also check that exception is EEXIST.
There is an attempt to fix in f6ba947c but using IOError instead of OSError.
Closes #14214794
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 25 Jan 2017 14:28:20 +0100] rev 11964
[web/views] show composite entities in delete view
Disabled by default, can be activated with show_composite = True Display first
level of composite entities in a treeview, limited to the current
(page_size - 1), so the maximum of displayed entities bump to
page_size * (page_size - 1).
Christophe de Vienne <christophe@unlish.com> [Mon, 11 May 2015 13:57:34 +0200] rev 11963
[workflow] Utilities for declarative definition of workflows
Closes #5337897
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Feb 2017 15:56:07 +0100] rev 11962
[server] Remove pseudo-handling of exceptions in Repository._delete_cascade_multi()
It seems to me that we never want to pass on an exception here be it in "test"
mode or not, so remove the last `except Exception:` clause. For instance, the
actual implementation would pass on an IntegrityError and thus possibly hide
it in a log message.
Concerning the `except Unauthorized:`, as said by the log message this should
not happen because we are within a `security_enabled(write=False)` context. So
remove it as well.
As far as I can tell, this strange handling of exceptions dates from
37668bf302f5 and there is no clear justification to it.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 21 Feb 2017 10:12:47 +0100] rev 11961
[web] fix os.rename usage on windows when destination exists
os.rename on windows will raise OSError (or WindowsError subclass) when if
destination file already exists.
Also check that exception is EEXIST.
There is an attempt to fix in f6ba947c but using IOError instead of OSError.
Closes #14214794
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 09 Feb 2017 10:31:15 +0100] rev 11960
[skeleton] Add "cubicweb.session.secret" to development.ini
Commented as other "secret" settings.
At least, now all settings are present in the development.ini file.
[ci skip]
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 10 Feb 2017 16:55:23 +0100] rev 11959
[pyramid] Include 'cubicweb.pyramid.predicates' where it is used
It's only used in "rest_api" module.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 10 Feb 2017 16:33:16 +0100] rev 11958
[pyramid] Rename make_cubicweb_application function as config_from_cwconfig
And update its docstring.
This function does not actually "make a cubicweb application", it just builds
a pyramid.config.Configurator instance from a CubicWeb config object.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 08 Feb 2017 17:49:25 +0100] rev 11957
[server] Reprase messages of db-check to avoid using "system" and "sources"
And rather mention "entity type table" and "entities" table, which are
clearer references.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Feb 2017 16:39:07 +0100] rev 11956
[predicates] Fix reference to has_related_entities in partial_has_related_entities docstring
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 07 Feb 2017 13:47:03 +0100] rev 11955
Fix possible double import of cubes modules
When cubes using the new layout are imported with 'cubicweb_<cube>' and with
'cubes.<cube>', the same module is imported twice.
Handle this by adding 'cubes.<cube>' to sys.modules when importing from
'cubicweb_<cube>'.
Move load_module() to a sub class _CubesLoader to share informations computed
in find_modules().
Don't handle subpackages in _CubesImporter and rely on normal import machinery
instead.
Add a test and use unittest from cubicweb.devtools.testlib which resolve to
unittest2 on PY2 with assertLogs() method.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 08 Feb 2017 10:31:26 +0100] rev 11954
Make load_module() return existing module if present in sys.modules
Otherwise the reload() builtin will not work correctly:
https://www.python.org/dev/peps/pep-0302/#specification-part-1-the-importer-protocol
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Feb 2017 15:43:19 +0100] rev 11953
[server] Ignore computed relations in "relations" integrity checker
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Feb 2017 15:40:39 +0100] rev 11952
[server] Use global registry variable of integrity checker functions
Instead of querying globals() in checkintegrity.check(), we maintain a
_CHECKERS dict mapping checker name to function in checkintegrity module. This
is later used to build the list of available checkers in 'db-check' command
help.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 07 Feb 2017 18:18:22 +0100] rev 11951
[doc] Add 3.25 release notes
[ci skip]
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 27 Jan 2017 18:09:56 +0100] rev 11950
[repository] possibility to disable connections pooling
Add a new configuration option 'connections-pooler-enabled' (default yes). If
set to no, disable connection pooling and open new connections to the database
on demand. This allow to use CubicWeb with other poolers (such as pgbouncer).
Florent Cayré <florent.cayre@logilab.fr> [Thu, 02 Feb 2017 14:58:39 +0100] rev 11949
[js] Fix loading image URL
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Feb 2017 11:21:31 +0100] rev 11948
[migration] Move pyramid-related migration after "entities" table modifications
Otherwise, we getting into `add_entity_type('CWSession')` we try to insert a
CWEType without any 'asource' column (per 3.24's schema) whereas the backend
still wants it.
Closes #17054035.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Feb 2017 13:37:32 +0100] rev 11947
Merge 3.24.5 into default branch
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 10 Jan 2017 16:08:55 +0100] rev 11946
[entities] Introduce an IDublinCore adapter
Move all dc_ methods from AnyEntity to the new IDublinCore adapter and proxy
them through a __getattr__ method on AnyEntity.
Current test suite should be enough.
Closes #3119992.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 27 Jan 2017 11:05:07 +0100] rev 11945
[skeleton] Add an entry point and configuration for running a Pyramid application
We add a `pyramid_main` function in __init__.py that instantiate the WSGI
application using "cubicweb.pyramid"; this is defined as an entry point (in
setup.py) so that pserve_ can find it.
Alongside comes a development.ini file which includes basic settings so that
running a Pyramid+CubicWeb application works (only the "instance=<appid>" may
be passed as a command-line argument). Logging is also configured there, but
only includes the cube at stake and cubicweb (others could be added if
needed).
.. _perse: \
http://docs.pylonsproject.org/projects/pyramid/en/1.8-branch/pscripts/pserve.html
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 27 Jan 2017 09:58:30 +0100] rev 11944
[cwconfig] Issue a warning when a "core" ctl plugin failed to load
This is often because of a missing dependency, the warning would indicate this
hopefully.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 27 Jan 2017 13:36:00 +0100] rev 11943
[dataimport] Fix "existing_relations" parameter name in ExtEntitiesImporter
Olivier CAYROL (Logilab) <Olivier.Cayrol@logilab.fr> [Thu, 15 Jan 2015 18:01:28 +0100] rev 11942
[ical] Create ICal events or todos depending on component type returned by adapter
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 31 Jan 2017 11:06:28 +0100] rev 11941
Added tag 3.24.5, debian/3.24.5-1, centos/3.24.5-1 for changeset 70d28e632206
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 31 Jan 2017 10:41:04 +0100] rev 11940
Prepare 3.24.5
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 30 Jan 2017 10:18:31 +0100] rev 11939
[devtools] Skip computed relations when attempting to auto-populate test database
Fix the automatic database population underlying automatic test to avoid attempt
to create computed relations.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 30 Jan 2017 18:14:45 +0100] rev 11938
[migration] Stop asking confirm to commit
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 30 Jan 2017 17:17:17 +0100] rev 11937
[migration] Fix crash on 3.24 migration
Some sql using a column droped the line above crash migration of cw < 3.24.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 30 Jan 2017 10:18:31 +0100] rev 11936
[devtools] Skip computed relations when attempting to auto-populate test database
Fix the automatic database population underlying automatic test to avoid attempt
to create computed relations.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Jan 2017 11:23:13 +0100] rev 11935
[test] Use our BaseTestCase in unittest_rtags.py
We need it DeprecatedInstanceWithoutModule for assertWarns method. Use this
instead of unittest2 directly with a try/except block to get rid of flake8
error about import not being one top of file.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Jan 2017 10:22:23 +0100] rev 11934
[server] Add a blank line before _CnxSetPool to fix PEP8 error
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Jan 2017 10:19:58 +0100] rev 11933
[pkg] Use logilab-common's master repository in dev requirements
Should follow-up on 7b2247098f58 after integration on logilab-common side.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 20 Jan 2017 16:39:44 +0100] rev 11932
[rtags] pass module name to RegistrableInstance
Instantiate a RegistrableInstance without passing the module name is deprecated
in https://www.logilab.org/patch/10047069
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 27 Jan 2017 17:42:16 +0100] rev 11931
[repository] move cnxset pool handling to a helper class
The class has responsability to handle connections pool operations in a single
public attribute 'cnxsets'.
On Repository _get_cnxset() and _free_cnxset() are replaced by cnxsets.get()
and cnxsets.release().
Drop multiple access to private attributes and methods from outside of Repository.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 27 Jan 2017 15:53:15 +0100] rev 11930
[pkg] Fix some error on building documentation
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 27 Jan 2017 16:26:09 +0100] rev 11929
Merge 3.24.4 into default branch
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 27 Jan 2017 13:41:24 +0100] rev 11928
Added tag 3.24.4, debian/3.24.4-1, centos/3.24.4-1 for changeset 35fd54c0065d
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 27 Jan 2017 13:30:24 +0100] rev 11927
Prepare 3.24.4
Florent Cayré <florent.cayre@gmail.com> [Fri, 20 Jan 2017 03:48:11 +0100] rev 11926
[source,native] Generalize the IntegrityError constraint parsing regex
This allows catching constraint-related errors that have been translated
by psycopg2, replacing surrounding english quotes by french quotes + space
for instance.
Closes #17047951.
Samuel Trégouët <samuel.tregouet@logilab.fr> [Wed, 18 Jan 2017 16:50:48 +0100] rev 11925
[pyramid] use pyramid.request `path_info` property instead of `path`
path is concatenation of SCRIPT_NAME and PATH_INFO
we just need PATH_INFO here
Samuel Trégouët <samuel.tregouet@logilab.fr> [Fri, 13 Jan 2017 11:36:51 +0100] rev 11924
[pyramid] fix login route with language-mode = url-prefix
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 18 Nov 2016 10:28:41 +0100] rev 11923
[devtools] Make timeout error in qunit tests configurable and use SkipTest in test_jscript.py
This is grafted from 87443f279b0f in default branch (got tired of CI failing
because of these unreliable tests).
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 26 Jan 2017 16:34:56 +0100] rev 11922
[web] Handle unspecified value in TZDatetimeField
`field._ensure_correctly_typed(self, form, value)` should return None if value
is None.
Closes #17050181.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 26 Jan 2017 16:33:15 +0100] rev 11921
[web] Handle unspecified 'date' or 'time' in JQueryDateTimePicker.process_field_data()
dict.get() may return None, which has no attribute strip.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Mon, 23 Jan 2017 15:35:19 +0100] rev 11920
[cwconfig] create a virtual "cubes" package
_CubesImporter now handle import of "cubes" and return a virtual module so that
"cubes" is always importable without having to create a __init__.py in
CUBES_DIR and add CUBES_DIR/.. to sys.path.
Drop custom code in setup.py used to create CUBES_DIR/__init__.py and drop now
useless warning when cubicweb is installed in develop mode
Update test_cubes_path() and ensure 'cubes.file' is not loaded before testing
its import. This test seems to have mistakes because cubes are loaded
automatically when discovering cw commands (cubes.<x>.ccplugin), not sure how
this should be fixed definitely.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 20 Jan 2017 18:17:04 +0100] rev 11919
Change hooks control (deny_all_hooks_but / allow_all_hooks_but) to be more predictable
Prior to this, if one execute code like:
with cnx.hooks.deny_all_hooks_but('metadata'):
with cnx.hooks.deny_all_hooks_but():
# mycode
'metadata' hooks will be activated anyway in the inner block, which is rather
unexpected (of course in real life you only see the latest hooks control
statement, the former being higher in the call stack). This is due to the
underlying usage of old `enable_hook_categories` / `disable_hook_categories`
methods, which were introduced much before the now official context manager
based API (with `cnx.[deny|all]_all_hooks_but(...)`).
To move on, this patch drop the two legacy methods, rename and privatize related
internal state on the connection (`hooks_mode` becomes `_hooks_mode`,
`disabled_hook_cats` and `enabled_hook_cats` become `_hooks_categories`) and
reimplement the `_hooks_control` context manager to simply update them.
See the added unit test for details.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 24 Jan 2017 14:09:13 +0100] rev 11918
[cwconfig] make appobjects_cubes_modnames() public
The method is used in cubicweb.cwvreg without underscore and outside of the
config class, so let's make this method public.
Fix autoreload with twisted.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 20 Jan 2017 15:16:18 +0100] rev 11917
Fix str(Unauthorized)
which is really problematic on python 3 where __unicode__ is never called
anymore. This was caused because in PY3, CubicWebException.__str__ was referencing
__unicode__ implementation of CubicWebException, not of its subclass that
implements it.
Fix a flake8 style warning about lambda assignment as a bonus.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 20 Jan 2017 09:55:08 +0100] rev 11916
[test] avoid using a deprecated feature of yams
handle_file() now require a module name (yams@d9120d7)
Alain Leufroy <alain@leufroy.fr> [Tue, 12 May 2015 22:14:24 +0200] rev 11915
[test] add some tests to web.views.baseviews
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 23 Jan 2017 10:44:00 +0100] rev 11914
[tox] Drop "touch {envdir}/share/cubicweb/cubes/__init__.py" command on py34 env
This was useful when we installed cubicweb in "develop" mode
but we do not do this anymore.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Mon, 23 Jan 2017 11:02:21 +0100] rev 11913
Drop support for https-url in all-in-one.conf
This feature allowing an instance to have both anonymous and authenticated
(https) url is not used anymore, let's drop it.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 20 Jan 2017 16:53:28 +0100] rev 11912
[test] use TemporaryDirectory context manager
For consistency with others tests, use TemporaryDirectory from
cubicweb.devtools.testlib.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 20 Jan 2017 14:32:34 +0100] rev 11911
[tox] Drop "exclude" option from flake8 config and adjust flake8-ok-files.txt accordingly
Some files listed in flake8-ok-files.txt were excluded of flake8 run because
of the "exclude" option in tox.ini. Some of them were non-existent files
(moved), some others were actually non-flake8-compliant. In the latter case,
we adjust trivial errors (blank lines, module import not on top of file) but
remove others (like cubicweb/test/unittest_utils.py) from
flake8-ok-files.txt.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 20 Jan 2017 10:31:04 +0100] rev 11910
[autoform] Go through guess_field even when field class is specified using uicfg
guess_field does not only find the proper field class for some
attribute/relation, but also do some basic configuration depending on e.g.
constraints. Before this patch, if one was specifying explicitly the field class
using uicfg.autoform_field, this automatic configuration wasn't happening.
Change form.field_by_name and ff.guess_field so explicit class are also
automatically configured now.
Closes #14474840
Florent Cayré <florent.cayre@gmail.com> [Fri, 20 Jan 2017 03:54:43 +0100] rev 11909
[uilib] Fix incorrect serialization of python dicts into javascript objects
Valid javascript object keys must be surrounded by quotes unless they are valid javascript identifiers. Valid identifiers are a defined by complex and changing specs, so it is much simpler to always use quotes.
Closes #17046704.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 12 Jan 2017 13:40:25 +0100] rev 11908
[repository] Fix connection-pool-size not set to 1 with quick_start enabled
config.load_schema() and config.init_cube() reload configuration options from
config file, so a manually set connections-pool-size (eg. when quick_start is
enabled) wasn't working.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 19 Jan 2017 11:12:35 +0100] rev 11907
[migration] Enhance assertion message to get a chance to fix the problem
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 19 Jan 2017 11:12:07 +0100] rev 11906
[migration] Skip virtual rtypes when adding relation definition through add_cube
Virtual rtypes should be skipped as they are added dynamically on loading
schema. Those are skipped by e.g. schema serialisation or add_entity_type, do
the same thing here.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 19 Jan 2017 11:10:47 +0100] rev 11905
[migration] Avoid unnecessary intermediary commit when migrating a schema
Those are low-hanging fruit following changes in ac74476d686c (Fix addition of
entity type including boundary constraints on its own attributes): this is no
more necesary to commit the get a new relation type definition in the schema.
At some point we could/should probably do more on this topic to avoid
intermediary commit on e.g. entity type addition, but this requires more work.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 18 Jan 2017 15:04:27 +0100] rev 11904
[migration] Fix addition of entity type including boundary constraints on its own attributes
This was failing because of the sequence of sql executing when adding an
attribute:
1. add entity type <commit>
2. add relation type for attribute 1 <commit>
3. add attribute 1 and associated constraints <commit>
etc.
In the case of e.g. start/end constraint, we were trying to add the constraint
before addition of the constrained attribute (e.g. add constraint on 'start'
referencing 'end', but only 'start' has been added yet, not 'end').
This patch fix this by:
* adding the relation type to the schema without having to commit, but keeping
the operation to revert the addition if necessary - this allows to a single
commit for all attributes of the entity type ;
* using a LateOperation on constraint operation, so we ensure attributes are
actually added before any constraint is added.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 19 Jan 2017 09:53:31 +0100] rev 11903
[schema sync] Refactor AfterAddCWRTypeHook and AfterAddCWComputedRTypeHook so the latter inherit from the former
and enhance their docstring.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 18 Jan 2017 12:36:02 +0100] rev 11902
Drop embed-allowed option, gone away for a long time
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 04 Jan 2017 10:02:05 +0100] rev 11901
Never record undo information for session or data import
for session, it may causes unlimited database size expansion while it makes no sense
to undo this kind of changes. For data import, they are created programatically hence
we may not want to undo this either.