Thu, 30 Mar 2017 10:43:49 +0200 [doc] Add release note about change in uicfg 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 30 Mar 2017 10:43:49 +0200] rev 12124
[doc] Add release note about change in uicfg
Thu, 30 Mar 2017 10:37:55 +0200 merge 3.25 heads 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Thu, 30 Mar 2017 10:37:55 +0200] rev 12123
merge 3.25 heads
Wed, 29 Mar 2017 14:56:04 +0200 [hg] Add generated slapd.conf to hgignore 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 14:56:04 +0200] rev 12122
[hg] Add generated slapd.conf to hgignore
Wed, 29 Mar 2017 11:17:37 +0200 Fix flake8 errors in unittest_cwctl 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 11:17:37 +0200] rev 12121
Fix flake8 errors in unittest_cwctl
Wed, 29 Mar 2017 11:14:53 +0200 [cwctl] Drop 'cubicweb_' prefix when displaying cubes with 'cubicweb-ctl list' 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 11:14:53 +0200] rev 12120
[cwctl] Drop 'cubicweb_' prefix when displaying cubes with 'cubicweb-ctl list' consistently with newcube / create commands. This is an alternate implementation to backed out changeset fe995d56c949. Closes #17054738
Tue, 28 Mar 2017 17:12:47 +0200 Fix flake8 errors in unittest_cwconfig 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 28 Mar 2017 17:12:47 +0200] rev 12119
Fix flake8 errors in unittest_cwconfig
Wed, 29 Mar 2017 10:34:39 +0200 [config] Test loading of ccplugin modules 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 10:34:39 +0200] rev 12118
[config] Test loading of ccplugin modules to ensure ccplugin modules of cube as package aren't loaded twice, once as `cubicweb_<cube>.ccplugin`, once as `cubes.<cube>.ccplugin`. This test used to fail until fe995d56c949 has been backout. It requires calling `cleanup_sys_module` in `CubicWebConfigurationTC.tearDown` to remove any cube's submodule loaded during tests, so content of `sys.modules` may be tested.
Wed, 29 Mar 2017 10:34:16 +0200 [test] Extract out method-which-is-not-a-method mocking iter_entry_points 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 10:34:16 +0200] rev 12117
[test] Extract out method-which-is-not-a-method mocking iter_entry_points to ease reuse and improve readability.
Wed, 29 Mar 2017 10:32:24 +0200 [cwconfig] Add a docstring on available_cubes method 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 29 Mar 2017 10:32:24 +0200] rev 12116
[cwconfig] Add a docstring on available_cubes method a renaming could be better at some point, but that's a start.
Tue, 28 Mar 2017 15:03:15 +0200 Backed out changeset fe995d56c949 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 28 Mar 2017 15:03:15 +0200] rev 12115
Backed out changeset fe995d56c949 available_cubes should not strip cubicweb_prefix but return actual package name for cube as package, since its output is also used to e.g. get ccplugin or site_cubicweb module name. Original aim of this set was to fix output of the "cubicweb-ctl list" command. This will be done by an alternate implementation in a later cset.
Wed, 29 Mar 2017 13:29:41 +0200 [hooks] Drop "logstats" hook 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Mar 2017 13:29:41 +0200] rev 12114
[hooks] Drop "logstats" hook It is now useless as its looping task would not run on a web instance because respective repository has no scheduler.
Wed, 29 Mar 2017 11:46:17 +0200 [hooks] Do not register "logstats" if repository has no scheduler 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Mar 2017 11:46:17 +0200] rev 12113
[hooks] Do not register "logstats" if repository has no scheduler
Wed, 29 Mar 2017 11:45:19 +0200 [server] Introduce an `has_scheduler` method on Repository 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Mar 2017 11:45:19 +0200] rev 12112
[server] Introduce an `has_scheduler` method on Repository This is to be used by client application to determine if looping tasks may be registered in the current process. By checking this, one will avoid the warning in looping_task method when the repository has no scheduler.
Wed, 29 Mar 2017 11:37:31 +0200 [server] Warn instead of failing when a looping task is registered and repo has no scheduler 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Mar 2017 11:37:31 +0200] rev 12111
[server] Warn instead of failing when a looping task is registered and repo has no scheduler We should provide a way for client code to detect if they should register the looping task or not. See next patch for that.
Wed, 29 Mar 2017 11:31:02 +0200 [server] Exit quickly when a looping task is registered in maintenance mode 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Mar 2017 11:31:02 +0200] rev 12110
[server] Exit quickly when a looping task is registered in maintenance mode In such cases the repository will not have a scheduler on purpose because the repository will not be kept running and will quickly shutdown after migration so that it's undesirable to have looping tasks being executed.
Fri, 24 Mar 2017 14:56:48 +0100 [config] Drop unused init_available_cubes method 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 24 Mar 2017 14:56:48 +0100] rev 12109
[config] Drop unused init_available_cubes method
Tue, 28 Mar 2017 11:26:48 +0200 [doc] Move content of former README.pyramid into relevant modules 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 28 Mar 2017 11:26:48 +0200] rev 12108
[doc] Move content of former README.pyramid into relevant modules
Fri, 24 Mar 2017 16:57:05 +0100 Drop README.pyramid.rst file 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 16:57:05 +0100] rev 12107
Drop README.pyramid.rst file It has been kept since 3.24 when we merged pyramid-cubicweb and cubicweb-pyramid repositories into cubicweb's one waiting for someone to move the information in some canonical place but this never happened and this information is probably not so useful or already existing elsewhere. So just drop the file.
Fri, 24 Mar 2017 17:22:02 +0100 Make entypo link a true URL in README 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 17:22:02 +0100] rev 12106
Make entypo link a true URL in README
Fri, 24 Mar 2017 17:21:37 +0100 Refer to cubicweb.readthedocs.io in README 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 17:21:37 +0100] rev 12105
Refer to cubicweb.readthedocs.io in README docs.cubicweb.org contains outdated documentation at the moment (and for quite some time); until it gets update, refer to the up-to-date documentation on readthedocs.
Mon, 27 Mar 2017 17:57:27 +0200 [server] don't catch exception from postcommit_event() if we are in test mode 3.25
Philippe Pepiot <philippe.pepiot@logilab.fr> [Mon, 27 Mar 2017 17:57:27 +0200] rev 12104
[server] don't catch exception from postcommit_event() if we are in test mode The historic behavior is to hide potential exception occurring in postcommit_event(). Unfortunately logging statements are hidden by default during tests and it become very hard to debug. At least raise if we are in test mode.
Fri, 24 Mar 2017 14:18:17 +0100 [pkg] Version 3.25.0rc1 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 14:18:17 +0100] rev 12103
[pkg] Version 3.25.0rc1
Wed, 22 Mar 2017 14:36:05 +0100 [tox] Simplify command line to build the doc 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:36:05 +0100] rev 12102
[tox] Simplify command line to build the doc
Fri, 24 Mar 2017 09:37:51 +0100 [pyramid] Drop warning about pyramid_debugtoolbar not found in debug mode 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 09:37:51 +0100] rev 12101
[pyramid] Drop warning about pyramid_debugtoolbar not found in debug mode Some people way want to run a pyramid server in debug mode without the toolbar. This warning is annoying for them. Others should just install and *include* the toolbar by hand.
Fri, 24 Mar 2017 11:21:39 +0100 [pkg] Add development.ini.tmpl to "cubicweb.pyramid" package data 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 24 Mar 2017 11:21:39 +0100] rev 12100
[pkg] Add development.ini.tmpl to "cubicweb.pyramid" package data Otherwise the file is not installed and `cubicweb-ctl create -c pyramid` does not work.
Thu, 23 Mar 2017 10:30:48 +0100 [skeleton] Don't use system site packages in tox environment 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Mar 2017 10:30:48 +0100] rev 12099
[skeleton] Don't use system site packages in tox environment As we changed this in cubicweb, there is a consensus that this is not the best practice so let us change it as well for skeleton.
Wed, 22 Mar 2017 14:38:10 +0100 [doc] Update "settings" pyramid documentation 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:38:10 +0100] rev 12098
[doc] Update "settings" pyramid documentation Document that without "bwcompat" we can use a development.ini file directly and add a dedicated section to list configuration options.
Wed, 22 Mar 2017 14:37:04 +0100 [doc] Update the "quickstart" page of pyramid documentation 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:37:04 +0100] rev 12097
[doc] Update the "quickstart" page of pyramid documentation Again mentioning the two modes of operations and dropping references to prior implementation.
Wed, 22 Mar 2017 14:34:51 +0100 [doc] Rewrite "pyramid" index page in the book 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:34:51 +0100] rev 12096
[doc] Rewrite "pyramid" index page in the book We drop references to pyramid-cubicweb and cubicweb-pyramid, remaining of the merge in 3.24. We now mention the two possible operation modes (with bwcompat being true or false).
Wed, 22 Mar 2017 15:05:04 +0100 [doc] Drop documentation for cubicweb.pyramid.tools module 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 15:05:04 +0100] rev 12095
[doc] Drop documentation for cubicweb.pyramid.tools module Which, as documented, mostly consists of internals.
Wed, 22 Mar 2017 14:49:04 +0100 [doc] Drop reference to "make_cubicweb_application" in pyramid doc 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:49:04 +0100] rev 12094
[doc] Drop reference to "make_cubicweb_application" in pyramid doc This function got renamed into config_from_cwconfig and this is arguably an internal detail so should not appear in the API documentation.
Wed, 22 Mar 2017 14:06:03 +0100 [doc] Remove trailing whitespaces in doc/book/pyramid/index.rst 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 14:06:03 +0100] rev 12093
[doc] Remove trailing whitespaces in doc/book/pyramid/index.rst
Wed, 22 Mar 2017 15:43:20 +0100 [tox] Install "pyramid" dependencies in "doc" environment 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 15:43:20 +0100] rev 12092
[tox] Install "pyramid" dependencies in "doc" environment Otherwise most of the cubicweb.pyramid API doc fails to build. For this we skip installation in the "doc" environment and source the new requirements/doc.txt which will install cubicweb[pyramid], thus pulling cubicweb plus pyramid's dependencies. Furthermore this requirements/doc.txt would be useful to build to documentation on readthedocs.
Tue, 07 Mar 2017 13:13:23 +0100 [web/views] fix bad html in deleteconf with show_composite=True 3.25
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 07 Mar 2017 13:13:23 +0100] rev 12091
[web/views] fix bad html in deleteconf with show_composite=True On an entity with no composite an additional item "None" was displayed.
Thu, 23 Mar 2017 12:09:59 +0100 [web/views] display unique composite entities in deleteconf 3.25
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 23 Mar 2017 12:09:59 +0100] rev 12090
[web/views] display unique composite entities in deleteconf When the entity has two relations to the same composite, display it only once.
Thu, 23 Mar 2017 11:47:59 +0100 Really make rqlrewrite flake8 compliant 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 Mar 2017 11:47:59 +0100] rev 12089
Really make rqlrewrite flake8 compliant
Wed, 22 Mar 2017 14:18:54 +0100 [pyramid] disable bwcompat by default in PyramidCWTest 3.25
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 22 Mar 2017 14:18:54 +0100] rev 12088
[pyramid] disable bwcompat by default in PyramidCWTest To avoid cubicweb exceptions handling.
Fri, 17 Mar 2017 10:15:16 +0100 Fix flake8 errors in rqlrewrite.py 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 17 Mar 2017 10:15:16 +0100] rev 12087
Fix flake8 errors in rqlrewrite.py
Wed, 01 Mar 2017 18:07:49 +0100 [rqlrewrite/schema] Avoid parsing computed relations for each query 3.25
Arthur Lutz <arthur.lutz@logilab.fr> [Wed, 01 Mar 2017 18:07:49 +0100] rev 12086
[rqlrewrite/schema] Avoid parsing computed relations for each query The RQLRelationRewriter is instanciated for each RQL query, it should avoid parsing computed relations formula by using a cache, which seems rightly located on the instance's schema. This brings a *huge* performance boost to some pages on application with a few computed relations (x4 observed on a client app). Kudos to Adrien, David and Sylvain. Closes #17059828
Wed, 22 Mar 2017 17:14:18 +0100 [pkg] Restrict yams version to be less than 0.45.0 3.23
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 22 Mar 2017 17:14:18 +0100] rev 12085
[pkg] Restrict yams version to be less than 0.45.0 This is a backport of 10d3bf220be2 on 3.23 branch
Wed, 22 Mar 2017 13:58:28 +0100 [pyramid] Remove pyramid_debugtoolbar from "pyramid.includes" 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Mar 2017 13:58:28 +0100] rev 12084
[pyramid] Remove pyramid_debugtoolbar from "pyramid.includes" Most of the times, the package is not installed (not pulled by cubicweb[pyramid] nor pyramid itself) in a fresh environment so that first start of a new instance will fail.
Wed, 22 Mar 2017 09:44:53 +0100 [doc] Add some details about rtag derivation and server api cleanup in release notes 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Mar 2017 09:44:53 +0100] rev 12083
[doc] Add some details about rtag derivation and server api cleanup in release notes
Wed, 22 Mar 2017 09:41:19 +0100 [doc] Simplify release notes section 3.25
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 22 Mar 2017 09:41:19 +0100] rev 12082
[doc] Simplify release notes section Those are all about backward incompatibilities, keep only one section about that.
Mon, 20 Mar 2017 11:35:58 +0100 [doc] Fill release notes for 3.25 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 11:35:58 +0100] rev 12081
[doc] Fill release notes for 3.25
Mon, 20 Mar 2017 12:13:04 +0100 [devtools] Create "newcube" in current directory by default 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 12:13:04 +0100] rev 12080
[devtools] Create "newcube" in current directory by default Instead of using "cubes path", which in many cases will be something wrong (like <prefix>/share/cubicweb/cubes) now that cubes are regular Python packages.
Mon, 20 Mar 2017 14:39:22 +0100 [pyramid] Do not register repository.shutdown atexit in test mode 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 14:39:22 +0100] rev 12079
[pyramid] Do not register repository.shutdown atexit in test mode It seems that there already is a special shutdown step for repository in test mode and pyramid's atexit handler interferes with it leading to assertion error about 'shutting_down' attribute being True in Repository.shutdown().
Tue, 21 Mar 2017 14:17:26 +0100 [cwconfig] don't rely on _CubeImporter while loading cubes 3.25
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 21 Mar 2017 14:17:26 +0100] rev 12078
[cwconfig] don't rely on _CubeImporter while loading cubes _CubeImporter can load cube subpackages twice (there is a test for submodules in cubicweb.test.unittest_cubes.test_no_double_import() but not with a subpackage). Since _CubeImporter is for backward compatibility and is supposed to be deprecated as soon as possible, don't rely on it when loading cube schema or appobjects and always load the real modname (eg. cubicweb_<cube> if exists else cubes.<cube>).
Mon, 20 Mar 2017 17:38:43 +0100 Added tag 3.24.7, debian/3.24.7-1, centos/3.24.7-1 for changeset 58f1e8545a77 3.24
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 17:38:43 +0100] rev 12077
Added tag 3.24.7, debian/3.24.7-1, centos/3.24.7-1 for changeset 58f1e8545a77
Mon, 20 Mar 2017 17:04:10 +0100 [pkg] Version 3.24.7 3.24 3.24.7 centos/3.24.7-1 debian/3.24.7-1
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 17:04:10 +0100] rev 12076
[pkg] Version 3.24.7
Mon, 20 Mar 2017 16:51:41 +0100 [pkg] Restrict yams version to be less than 0.45.0 3.24
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 16:51:41 +0100] rev 12075
[pkg] Restrict yams version to be less than 0.45.0 Because of reader's API changes x and other subtle but hard to debug changes in appobjects registration in version 0.45.0. Closes #17065626.
Fri, 17 Mar 2017 16:29:38 +0100 [pkg] Version 3.25.0rc0 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 17 Mar 2017 16:29:38 +0100] rev 12074
[pkg] Version 3.25.0rc0 Let's make a release candidate version of CubicWeb 3.25.0 (only for the Python package), in the hope that some issues that we usually discover after release will be sorted out before.
Mon, 20 Mar 2017 11:16:11 +0100 [pyramid] Rename paste app factory to pyramid_main
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 11:16:11 +0100] rev 12073
[pyramid] Rename paste app factory to pyramid_main Making it clearer that this would build a Pyramid application, just in case we eventually provide other means to create a WSGI application than Pyramid.
Mon, 20 Mar 2017 09:08:44 +0100 [tox] Do not use site packages in testenv
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 09:08:44 +0100] rev 12072
[tox] Do not use site packages in testenv This is the normal way of running tox. We used to set this because some people liked to run tests using packages installed by other means (i.e. system-wide). Now, there seems to be a consensus that running tox without site packages is a better idea, in particular since many of our dependencies are now available as wheels and thus would install quickly provided one uses a recent pip/virtualenv.
Mon, 20 Mar 2017 10:25:04 +0100 [test] Add user-site to PYTHONPATH before installation of new cube in test_newcube_install
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 10:25:04 +0100] rev 12071
[test] Add user-site to PYTHONPATH before installation of new cube in test_newcube_install Otherwise, setuptools complains that the target installation directory (i.e. "user site" is not in PYTHONPATH). This is probably because we use a fake HOME with --user install option. Failure shows up when running tests through tox without system site packages (see next patch).
Fri, 17 Mar 2017 17:32:04 +0100 [pkg] Depends on yams >= 0.45.0
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 17 Mar 2017 17:32:04 +0100] rev 12070
[pkg] Depends on yams >= 0.45.0
Fri, 17 Mar 2017 17:31:10 +0100 [pkg] Depends on logilab-common >= 1.4.0
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 17 Mar 2017 17:31:10 +0100] rev 12069
[pkg] Depends on logilab-common >= 1.4.0
Mon, 20 Mar 2017 10:28:01 +0100 Merge with 3.24 branch
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 10:28:01 +0100] rev 12068
Merge with 3.24 branch
Mon, 20 Mar 2017 09:40:24 +0100 Added tag 3.24.6, debian/3.24.6-1, centos/3.24.6-1 for changeset 4029fb83a67d 3.24
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 09:40:24 +0100] rev 12067
Added tag 3.24.6, debian/3.24.6-1, centos/3.24.6-1 for changeset 4029fb83a67d
Mon, 20 Mar 2017 08:58:25 +0100 [pkg] Version 3.24.6 3.24 3.24.6 centos/3.24.6-1 debian/3.24.6-1
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 08:58:25 +0100] rev 12066
[pkg] Version 3.24.6
Mon, 20 Mar 2017 08:57:17 +0100 Merge public heads 3.24
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 20 Mar 2017 08:57:17 +0100] rev 12065
Merge public heads
Wed, 15 Mar 2017 12:01:14 +0100 [web/views] deleteconf: ignore workflow when displaying composite entities
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 15 Mar 2017 12:01:14 +0100] rev 12064
[web/views] deleteconf: ignore workflow when displaying composite entities This hide TrInfo composite entities when deleting an workflowable entity.
Fri, 03 Mar 2017 14:06:27 +0100 [rset] Use RQL cache in syntax_tree method
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Mar 2017 14:06:27 +0100] rev 12063
[rset] Use RQL cache in syntax_tree method This avoid several unnecessary parsings per HTTP request, since in most case rset's rql is in the rql cache (since it has just been executed), while yapps based parsing is known to be slow.
Fri, 17 Mar 2017 07:32:48 +0100 [repo] Introduce a clear_caches method on the Querier class
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 17 Mar 2017 07:32:48 +0100] rev 12062
[repo] Introduce a clear_caches method on the Querier class that is called from repository's clear_caches.
Wed, 15 Mar 2017 08:30:27 +0100 [repo] Consistent API for cache clearing
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 Mar 2017 08:30:27 +0100] rev 12061
[repo] Consistent API for cache clearing clear_caches, reset_caches, clear_eid_caches are now all named 'clear_caches' with optional eids/etypes arguments to clear eid specific cache entry,
Fri, 03 Mar 2017 13:09:11 +0100 [repo] Extract rql cache handling to a dedicated class
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Mar 2017 13:09:11 +0100] rev 12060
[repo] Extract rql cache handling to a dedicated class
Thu, 16 Mar 2017 17:25:07 +0100 [sobjects] Fix a trivial flake8 error
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 16 Mar 2017 17:25:07 +0100] rev 12059
[sobjects] Fix a trivial flake8 error
Wed, 15 Mar 2017 08:27:45 +0100 [repo] Drop cache clearing methods from the source interface
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 Mar 2017 08:27:45 +0100] rev 12058
[repo] Drop cache clearing methods from the source interface Those are actually system source specific.
Wed, 15 Mar 2017 08:04:58 +0100 [repo] Move and rename repo._clear_planning_cache
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 Mar 2017 08:04:58 +0100] rev 12057
[repo] Move and rename repo._clear_planning_cache to make it clearer it's clearing the @cache of source_defs method.
Fri, 10 Mar 2017 10:10:44 +0100 [sobjects] Fix flake8 errors in services.py
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 10:10:44 +0100] rev 12056
[sobjects] Fix flake8 errors in services.py
Wed, 15 Mar 2017 08:39:51 +0100 [test] Rename BaseQuerierTC._access to BaseQuerierTC.admin_access
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 Mar 2017 08:39:51 +0100] rev 12055
[test] Rename BaseQuerierTC._access to BaseQuerierTC.admin_access so it's consistent with CubicWebTC and avoid access to a protected attribute which has been exposed by the removal of the 'session' property a few csets earlier.
Wed, 15 Mar 2017 09:15:32 +0100 [repo] Fix flake8 error
Sylvain Thénault <sylvain.thenault@logilab.fr> [Wed, 15 Mar 2017 09:15:32 +0100] rev 12054
[repo] Fix flake8 error
Thu, 09 Mar 2017 16:36:33 +0100 [pyramid] Add a "pyramid" instance configuration type
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 09 Mar 2017 16:36:33 +0100] rev 12053
[pyramid] Add a "pyramid" instance configuration type In a new module 'cubicweb.pyramid.config' we define a "pyramid" instance configuration type. The noticeable feature of this configuration is that it manages a 'development.ini' file that gets installed in application home (along with `.conf` file). This file is templated and includes generated values for secrets of session and authtk tokens. This means that we can just call: pserve etc/cubicweb.d/<appname>/development.ini or gunicorn --paste etc/cubicweb.d/<appname>/development.ini -b :8080 just after instance creation to get a pyramid instance running without having to hack around a 'pyramid.ini' file. This patch drops 'development.ini' from skeleton and moves it in cubicweb/pyramid so that it gets installed at instance creation which is more appropriate than in cube creation. The new configuration class sets "cubicweb.bwcompat" setting to false so it is not intended to replace the "all-in-one" configuration type (which would require a bit more work). This configuration is close to the the 'repository' configuration type with just a couple of options from WebConfiguration that are needed for Pyramid (anonymous user/password plus some miscellaneous options that I'm not so sure are really needed). Note, in particular, that we do not pull CORS settings to be injected as a WSGI middleware like in wsgi_application_from_cwconfig() since I believe this should be left as an end-user responsibility and since this can be defined in a standard way in paste configuration. This configuration inherits from ServerConfiguration but registers the same appobjects as WebConfiguration. In cubicweb.web.request._CubicWebRequestBase, we guard against access to "uiprops" and "datadir_url" of the config because this new "pyramid" config does not have these (this does not make sense without bwcompat mode). At some point, we should either avoid using `cw_request`'s pyramid request attribute or make cubicweb's web request really independant of existing implementation and drop these assumptions.
Fri, 10 Mar 2017 12:02:41 +0100 [pyramid] Call repository's shutdown method atexit
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 10 Mar 2017 12:02:41 +0100] rev 12052
[pyramid] Call repository's shutdown method atexit This way when run through a WSGI server (pserve, gunicorn, etc.) we make sure that the repository is properly shut down. In particular, this would wait for threads to terminate (otherwise, they'll be killed).
Fri, 03 Mar 2017 11:13:03 +0100 [querier] Turn repo.querier_cache_key into a private function
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Mar 2017 11:13:03 +0100] rev 12051
[querier] Turn repo.querier_cache_key into a private function of the querier module, only place where it's used.
Tue, 14 Mar 2017 10:34:03 +0100 [cleanup] Fix flake8 errors in web/application.py and associated test
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 14 Mar 2017 10:34:03 +0100] rev 12050
[cleanup] Fix flake8 errors in web/application.py and associated test
Tue, 14 Mar 2017 10:33:24 +0100 [test] Simplify CWTC's init_authentication and assertAuthSuccess
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 14 Mar 2017 10:33:24 +0100] rev 12049
[test] Simplify CWTC's init_authentication and assertAuthSuccess which shouldn't rely on removed .session attribute while it's not necessary and could be written in a simpler way.
Fri, 10 Mar 2017 18:26:05 +0100 [cleanup] Drop non sense sentence in docstring
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:26:05 +0100] rev 12048
[cleanup] Drop non sense sentence in docstring
Fri, 10 Mar 2017 18:23:29 +0100 [repo] Drop Session at last
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:23:29 +0100] rev 12047
[repo] Drop Session at last This is not used at all anymore.
Fri, 10 Mar 2017 18:21:22 +0100 Fix flake8 some errors
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:21:22 +0100] rev 12046
Fix flake8 some errors
Fri, 10 Mar 2017 18:18:51 +0100 [test] Use existing reference to repo_source
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:18:51 +0100] rev 12045
[test] Use existing reference to repo_source
Fri, 10 Mar 2017 18:04:25 +0100 [repo] Drop repo.new_session method
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:04:25 +0100] rev 12044
[repo] Drop repo.new_session method we should not go through Session to create Connection anymore. This is unofficial API, no backward compat for now.
Tue, 14 Mar 2017 11:07:58 +0100 Stop using Session on the repository side
Sylvain Thénault <sylvain.thenault@logilab.fr> [Tue, 14 Mar 2017 11:07:58 +0100] rev 12043
Stop using Session on the repository side Only expect session on web request, and let the web session/authentication managers provide them. Access to cnx.data, which used to return session data, is deprecated: there is no more access to session data from the repository side, and they should be access from req.session.data from the web side.
Fri, 10 Mar 2017 18:00:13 +0100 [test] Drop unnecessary call to new_session
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:00:13 +0100] rev 12042
[test] Drop unnecessary call to new_session This is not unittest, the above call is enough.
Fri, 10 Mar 2017 17:58:25 +0100 [user] Drop ugly hack on CWUser entity class
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:58:25 +0100] rev 12041
[user] Drop ugly hack on CWUser entity class which should be not necessary anymore, beside two remaining usage in our own test suite.
Fri, 10 Mar 2017 17:57:13 +0100 [test] Use user_session_cache_key function
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:57:13 +0100] rev 12040
[test] Use user_session_cache_key function to generate cache key.
Fri, 10 Mar 2017 17:52:44 +0100 [session+test] Stop storing / accessing session when it's not necessary
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:52:44 +0100] rev 12039
[session+test] Stop storing / accessing session when it's not necessary
Fri, 10 Mar 2017 17:46:06 +0100 [devtools] Stop relying on Session to create connection in RepoAccess
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:46:06 +0100] rev 12038
[devtools] Stop relying on Session to create connection in RepoAccess
Fri, 10 Mar 2017 17:44:03 +0100 [devtools] Stop using repo.new_session
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:44:03 +0100] rev 12037
[devtools] Stop using repo.new_session
Fri, 10 Mar 2017 18:25:35 +0100 [session] Kill support for a 'session_open' hook event
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:25:35 +0100] rev 12036
[session] Kill support for a 'session_open' hook event To be consistent with dropping of the 'session_close' event, and also because this is already not called when using pyramid.
Fri, 10 Mar 2017 17:03:28 +0100 [devtools] Rename FakeSession into FakeConnection
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 17:03:28 +0100] rev 12035
[devtools] Rename FakeSession into FakeConnection because it is what it is.
Fri, 10 Mar 2017 16:55:57 +0100 [cleanup] Drop references to the old internal_session method
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 16:55:57 +0100] rev 12034
[cleanup] Drop references to the old internal_session method dropped a while ago, no need to talk about it in a docstring nor to fake it.
Fri, 10 Mar 2017 16:31:08 +0100 [session] Drop unused class
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 16:31:08 +0100] rev 12033
[session] Drop unused class
Fri, 10 Mar 2017 16:14:05 +0100 [cleanup] Drop no more used parse_repo_uri function
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 16:14:05 +0100] rev 12032
[cleanup] Drop no more used parse_repo_uri function
Fri, 10 Mar 2017 14:07:15 +0100 [server] Fix flake8 error of test/data/hooks.py
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 14:07:15 +0100] rev 12031
[server] Fix flake8 error of test/data/hooks.py
Fri, 10 Mar 2017 14:02:31 +0100 [repo] Drop repo.connect backward compat
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 14:02:31 +0100] rev 12030
[repo] Drop repo.connect backward compat use new_session instead (introduced in 3.19 iirc)
Fri, 10 Mar 2017 14:01:45 +0100 [session] Drop no more necessary Session.sessionid and Connection.connectionid
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 14:01:45 +0100] rev 12029
[session] Drop no more necessary Session.sessionid and Connection.connectionid
Fri, 10 Mar 2017 14:04:26 +0100 [repo] Kill repo._sessions
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 14:04:26 +0100] rev 12028
[repo] Kill repo._sessions and with it the need to have a looping task to clean it up, and with that all the session's timestamping machinery.
Fri, 10 Mar 2017 18:24:40 +0100 [repo] Stop closing session
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 18:24:40 +0100] rev 12027
[repo] Stop closing session The only point in "closing" session is to call the `session_close` event. Since I'm not aware of any application relying on it, I think this is too costly (in term of code) to maintain and propose to drop it.
Fri, 10 Mar 2017 12:07:29 +0100 [views] Stop giving stats / debug information relying on _sessions
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 12:07:29 +0100] rev 12026
[views] Stop giving stats / debug information relying on _sessions This is already broken when using pyramid anyway.
Fri, 10 Mar 2017 16:41:10 +0100 [session] Stop relying on _sessions to synchronize living session
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 16:41:10 +0100] rev 12025
[session] Stop relying on _sessions to synchronize living session by doing what we currently do in pyramid. Also, attempt to synchronize CWUser's class sounds like a dark corner case handling that should be removed in favor of short lived user objects (beside it shouldn't occur except during migration).
Fri, 10 Mar 2017 12:01:31 +0100 [test] Drop useless access to repo._sessions
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 12:01:31 +0100] rev 12024
[test] Drop useless access to repo._sessions test still succeed afterwards.
Fri, 10 Mar 2017 11:27:01 +0100 [repo] Fix flake8 errors in server/__init__.py
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 11:27:01 +0100] rev 12023
[repo] Fix flake8 errors in server/__init__.py
Fri, 10 Mar 2017 11:25:24 +0100 [repo] Drop no more used ShuttingDown exception
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 11:25:24 +0100] rev 12022
[repo] Drop no more used ShuttingDown exception
Fri, 10 Mar 2017 11:55:16 +0100 [repo] Drop _get_session method
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 10 Mar 2017 11:55:16 +0100] rev 12021
[repo] Drop _get_session method it's not actually necessary but holds underlying _sessions dict handling. Drop backward compat relying on it (which IMO should not be a problem). Drop import of unused QueryError along the way.
Thu, 09 Mar 2017 18:02:16 +0100 [test] Drop call to CubicWebConfiguration.load_cwctl_plugins in unittest_cwctl.py
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 09 Mar 2017 18:02:16 +0100] rev 12020
[test] Drop call to CubicWebConfiguration.load_cwctl_plugins in unittest_cwctl.py This is no longer need now that we call load_available_configurations() in the "list" command (see 5e7282bdf140).
Thu, 09 Mar 2017 16:35:58 +0100 [web] Extract a base class out WebConfiguration
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 09 Mar 2017 16:35:58 +0100] rev 12019
[web] Extract a base class out WebConfiguration This will be used to build a CubicWebPyramidConfiguration in following changeset.
Thu, 09 Mar 2017 16:41:18 +0100 [tox] Drop reference to removed init_instance.py file in flake8-ok-files.txt
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 09 Mar 2017 16:41:18 +0100] rev 12018
[tox] Drop reference to removed init_instance.py file in flake8-ok-files.txt The file got removed in 1b9fd8bda1cd.
Fri, 10 Mar 2017 09:39:18 +0100 [web] Put 'use-uicache' option in level 2
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 10 Mar 2017 09:39:18 +0100] rev 12017
[web] Put 'use-uicache' option in level 2 So that users do not get prompted with this. Follow-up on c34590161082.
Tue, 21 Feb 2017 08:56:38 +0100 [server] Add a "scheduler" command to run repository scheduler
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 21 Feb 2017 08:56:38 +0100] rev 12016
[server] Add a "scheduler" command to run repository scheduler This commands starts the repository scheduler as a standalone process that should complement a CubicWeb web instance running as a WSGI application. Added a log message in repository's shutdown method to help testing the command (i.e. make sure the method is called after the scheduler stopped). Related to #17057223.
Mon, 06 Mar 2017 15:13:44 +0100 [cwconfig] Do not instantiate a repo with a scheduler in repository method
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 15:13:44 +0100] rev 12015
[cwconfig] Do not instantiate a repo with a scheduler in repository method None of the caller of this method need the repository to have a scheduler and having a scheduler should be something that's explicitly requested.
Mon, 06 Mar 2017 14:50:00 +0100 [server] Make cubicweb/server/utils.py flake8-clean
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 14:50:00 +0100] rev 12014
[server] Make cubicweb/server/utils.py flake8-clean
Mon, 06 Mar 2017 14:38:52 +0100 [server] Drop utils's LoopTask and TasksManager classes not used anymore
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 06 Mar 2017 14:38:52 +0100] rev 12013
[server] Drop utils's LoopTask and TasksManager classes not used anymore Related to 17057223.
(0) -10000 -3000 -1000 -112 +112 tip