Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 10:51:31 +0200] rev 12660
[pkg] Remove build dependency on dh-systemd
As suggested by Lintian, remove build dependency on obsolete package
dh-systemd. Instead, specify a more precise version of debhelper 9 that
added support for systemd.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 13 Jun 2019 15:04:13 +0200] rev 12659
[config] Raise in case of failure to send emails when in test mode
Since, for some reason, exception log messages are not visible when
running tests, it's very hard to debug when sendmails() method fails
during tests. So, as in some other places, let's raise the exception
when in test mode.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Wed, 19 Jun 2019 16:33:15 +0200] rev 12658
[doc] Update documentation to match current Debian packages
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Wed, 19 Jun 2019 16:32:25 +0200] rev 12657
[pkg] Remove transitional packages
We can take the opportunity of the switch to Python 3 to get rid
of old transitional packages. Let's do it. :)
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Wed, 19 Jun 2019 16:10:19 +0200] rev 12656
[pkg] Use sections from requires.txt to populate Recommends and Suggests
As Denis Laxalde pointed out, dh_python can also generate Recommends and
Suggests from Python package names. So let's use that instead of
manually populating these fields in `debian/control`.
Optional dependencies are currently specified in `setup.py` grouped by
feature. These dependency groups are turned into sections in
`requires.txt`. Thankfully `dh_python3` has options to populate
Recommends or Suggests with all package from a given section.
`debian/rules` now contains a list of which sections should go
to Recommends and which section should go to Suggests. Because such
extra list easily gets out-of-sync, we add a third list for ignored
sections, and ensure that all sections currently in `requires.txt`
get a mentioned in `debian/rules`.
Here are the results compared to the previous version with explicit
Recommends and Suggests (only listing Python packages):
|==============================================================|
| only in previous | common | only in new |
|==============================================================|
| Recommends |
|--------------------------------------------------------------|
| | python3-docutils | |
| python3-fyzz | | |
| python3-imaging | | |
| | python3-pycryptodome | |
| | python3-pyramid | |
| | python3-pyramid-multiauth | |
| python3-pysqlite2 | | |
| | python3-rdflib | |
| | python3-repoze.lru | |
| python3-simpletal | | |
| | python3-vobject | |
| | python3-waitress | |
| python3-werkzeug | | |
| | python3-wsgicors | |
|--------------------------------------------------------------|
| Suggests |
|--------------------------------------------------------------|
| | | python3-pil |
We also lose versioned dependencies which should not really be an issue
for Recommends and Suggests.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Wed, 19 Jun 2019 15:44:17 +0200] rev 12655
[crypto] Use Cryptodome namespace instead of Crypto
PyCryptodome comes in two flavors: “an almost drop-in replacement for the old
PyCrypto library” and “a library independent of the old PyCrypto”. The former
uses the Crypto namespace, and is shipped as `pycryptodome` while the latter
uses Cryptodome instead and lies in the `pycryptodomex` package.
Given the reason to switch to PyCryptodome is that PyCrypto in unmaintained,
its probably better to avoid any mistake and mandate the specific usage of
the Cryptodome namespace by requiring `pycryptodomex` instead of
`pycryptodome`.
A more present reason is that Debian buster will only provide a package
with the separate namespace flavor. The current Recommends is not working with
the current code. Although it's important to note that the package name will
probably have to be changed to `python3-pycryptodomex` once
https://bugs.debian.org/886291 is solved.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 17 Jun 2019 11:12:03 +0200] rev 12654
[pkg] Remove python3-six from Build-Depends
The default branch only provides support for Python 3.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 17 Jun 2019 11:11:28 +0200] rev 12653
[pkg] Merge python3-cubicweb-pyramid into python3-cubicweb
As suggested by Denis Laxalde, we can merge python3-cubicweb-pyramid into
python3-cubicweb as all other web backend in the default branch.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 17 Jun 2019 10:37:32 +0200] rev 12652
[pkg] Remove explicit Depends on Python packages for python3-cubicweb
As suggested by Denis Laxalde, we can let pybuild generate the list
of Depends from the egg requirements.
The list we get is slightly less specific in terms of needed versions,
but given the age of the previous ones, it's unlikely to cause issues.
Also we lose python3-six from the list… which is correct as it was
removed from the dependencies in 26744ad37953.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 12:04:39 +0200] rev 12651
[pkg] Fix spelling mistake in doc-base abstract
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 12:04:11 +0200] rev 12650
[pkg] Fix doc-base section
As pointed by Lintian, the “Apps” section is only used in menu,
not in doc-base. We can just remove it.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 11:25:24 +0200] rev 12649
[pkg] Use “dependency package” instead of “virtual package” to describe python3-cubicweb-postgresql-support
The term “virtual” was too imprecise and is not accepted for empty
packages by Lintian anymore.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 11:15:17 +0200] rev 12648
[pkg] Move lintian-overrides file to debian/source directory
Just use the now preferred location.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 11:13:06 +0200] rev 12647
[pkg] Stop using /etc/bash_completion.d
cubicweb-ctl shipped an empty /etc/bash_completion.d as a leftover
of shipping a bash completion script. As pointed by Lintian, this
directory is not obsolete, so let's get rid of it for good.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Thu, 13 Jun 2019 16:47:47 +0200] rev 12646
[pkg] Tidy substvars usage in control file
The documentation package was missing a Built-Using field to record
the provenance of the templates.
Empty packages or meta packages do not require Depends on a specific
Python version, so we can remove the relevant substvars.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 10:53:48 +0200] rev 12645
[pkg] Specify priority “optional” instead of the obsolete “extra”
Quoting Lintian, “Since Debian Policy version 4.0.1, the priority extra
has been deprecated.” So let's use “optional” instead.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Mon, 10 Jun 2019 10:51:31 +0200] rev 12644
[pkg] Remove build dependency on dh-systemd
As suggested by Lintian, remove build dependency on obsolete package
dh-systemd. Instead, specify a more precise version of debhelper 9 that
added support for systemd.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Wed, 05 Jun 2019 18:35:51 +0200] rev 12643
[pkg] Run test suite as part of autopkgtest
Add support for autopkgtest. The test “unittest” will run the test
suite using pytest. As we need PostgreSQL in the test environment
and open network connection, the test is marked with
`isolation-container` and requires at least LXC to be run, e.g:
autopkgtest -s -- lxc -s autopkgtest-sid
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Wed, 05 Jun 2019 16:29:04 +0200] rev 12642
[pkg] Switch to Debian source format 3.0 (quilt)
This forces us to base the Debian package on the source of the Python
package (as produced by running `python3 setup.py sdist`). While
it might seem cumbersome, this greatly reduces likelyhood of mismatch
between an installation via `pip` and one using the Debian package.
`dpkg-source` will also document for us what is currently in the
source repository but not in the Python package. Currently the missing
file are:
PKG-INFO
cubicweb/sobjects/test/data/cubicweb_comment/schema.py
cubicweb/sobjects/test/data/cubicweb_comment/__init__.py
cubicweb/sobjects/test/data/cubicweb_comment/__pkginfo__.py
cubicweb/sobjects/test/data/cubicweb_card/schema.py
cubicweb/sobjects/test/data/cubicweb_card/entities.py
cubicweb/sobjects/test/data/cubicweb_card/__init__.py
cubicweb/sobjects/test/data/cubicweb_card/__pkginfo__.py
cubicweb/server/test/data-migractions/cubicweb_comment/schema.py
cubicweb/server/test/data-migractions/cubicweb_comment/__init__.py
cubicweb/server/test/data-migractions/cubicweb_comment/__pkginfo__.py
cubicweb/server/test/data-migractions/cubicweb_localperms/schema.py
cubicweb/server/test/data-migractions/cubicweb_localperms/__init__.py
cubicweb/server/test/data-migractions/cubicweb_localperms/__pkginfo__.py
cubicweb/server/test/data-migractions/cubicweb_basket/schema.py
cubicweb/server/test/data-migractions/cubicweb_basket/__init__.py
cubicweb/server/test/data-migractions/cubicweb_basket/__pkginfo__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/schema.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/__init__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_comment/__pkginfo__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/schema.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/__init__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_localperms/__pkginfo__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/schema.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/__init__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_basket/__pkginfo__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/schema.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/__init__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_tag/__pkginfo__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/schema.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/__init__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_card/__pkginfo__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/schema.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/__init__.py
cubicweb/server/test/data-migractions/migratedapp/cubicweb_file/__pkginfo__.py
cubicweb/server/test/data-migractions/cubicweb_tag/schema.py
cubicweb/server/test/data-migractions/cubicweb_tag/__init__.py
cubicweb/server/test/data-migractions/cubicweb_tag/__pkginfo__.py
cubicweb/server/test/data-migractions/cubicweb_card/schema.py
cubicweb/server/test/data-migractions/cubicweb_card/__init__.py
cubicweb/server/test/data-migractions/cubicweb_card/__pkginfo__.py
cubicweb/server/test/data-migractions/cubicweb_file/schema.py
cubicweb/server/test/data-migractions/cubicweb_file/__init__.py
cubicweb/server/test/data-migractions/cubicweb_file/__pkginfo__.py
cubicweb/test/data-rewrite/cubicweb_localperms/schema.py
cubicweb/test/data-rewrite/cubicweb_localperms/__init__.py
cubicweb/test/data-rewrite/cubicweb_localperms/__pkginfo__.py
cubicweb/test/data-rewrite/cubicweb_card/schema.py
cubicweb/test/data-rewrite/cubicweb_card/entities.py
cubicweb/test/data-rewrite/cubicweb_card/__init__.py
cubicweb/test/data-rewrite/cubicweb_card/__pkginfo__.py
The current manifest will duplicate several files that are stored as
symlinks in the Mercurial repository, hence the long list of ignored
files in `extend-diff-ignore`.
Jérémy Bobbio <jeremy.bobbio@irq7.fr> [Wed, 05 Jun 2019 15:38:29 +0200] rev 12641
[pkg] Switch all Debian packages to Python 3
julien tayon <julien.tayon@logilab.fr> [Tue, 11 Jun 2019 09:40:12 +0200] rev 12640
Fix sorting key for rdefs in schema viewer
With changeset 234ca3cbbb46, clicking in the schema of an entity with
cubicweb in py3 on "vue en boite" will probably result in an infinite
spinner (which implies cw > 3.26)
What happened ?
This "vue en boite" used to work at least until...
hg diff -c a8c1ea390400 cubicweb/schema.py
@@ -993,10 +992,6 @@ class CubicWebRelationSchema(PermissionM
return False
return True
- @deprecated('use .rdef(subjtype, objtype).role_cardinality(role)')
- def cardinality(self, subjtype, objtype, target):
- return self.rdef(subjtype, objtype).role_cardinality(target)
-
class CubicWebSchema(Schema):
"""set of entities and relations schema defining the possible data sets
But, wait ...
If I open a shell on an instance of cw 3.24 something seems off
>>> list(schema['CWUniqueTogetherConstraint'].relation_definitions())[0][0].cardinality
# <bound method CubicWebRelationSchema.wrapped of <constraint_of [CWUniqueTogetherConstraint,CWEType]>>
We have been sorting on a method the whole time ? Is it possible what
were the effects ?
1) We cannot sort function can't we ?
>>> def adder(i): return lambda x: x+i
>>> sorted(map(adder,range(10)))
[<function __main__.<lambda>>,
<function __main__.<lambda>>,
...
Yes we can.
2) what does it means.
>>> { adder(1) : 1 }
Out[19]: {<function __main__.<lambda>>: 1}
In fact the function object as a __hash__ method (which is practical for making
memoizers (cache)), and return truly random results (pseudo random).
My take on this patch is relations have NEVER been sorted by cardinality.
No one never ever noticed. Hence, I propose to not fix a bug that never was
reported.
julien tayon <julien.tayon@logilab.fr> [Tue, 04 Jun 2019 09:35:47 +0200] rev 12639
Flake8 cubicweb/web/schemaviewer.py
julien tayon <julien.tayon@logilab.fr> [Tue, 04 Jun 2019 09:35:47 +0200] rev 12638
[py3] changing unicode to str
py2 support being dropped, passing the code in full py3 str/bytes syntax
julien tayon <julien.tayon@logilab.fr> [Tue, 11 Jun 2019 09:07:24 +0200] rev 12637
[py3] Use sorted(key=...) instead of sorted(cmp=...)
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 07 Jun 2019 14:56:22 +0200] rev 12636
Merge with 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 07 Jun 2019 14:53:03 +0200] rev 12635
Added tag 3.26.11, debian/3.26.11-1 for changeset 633ca84bea58
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 07 Jun 2019 14:52:51 +0200] rev 12634
[pkg] Version 3.26.11
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 06 Jun 2019 16:40:14 +0200] rev 12633
Added tag debian/3.26.10-1 for changeset 0ce26fb5ab48
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 May 2019 16:59:57 +0200] rev 12632
[debian] New upstream release
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 May 2019 17:24:21 +0200] rev 12631
[debian] Drop override_dh_auto_install about cubicweb-ctl
The script should be installed normally as it is a setuptools' entry
point.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 23 May 2019 17:25:59 +0200] rev 12630
[debian] Remove test/doc Build-Depends
We are not actually running tests during package build. (This was
disabled for python2, now it is also for python3.) And having these
build-depends makes it hard to rebuild the package.
Laurent Peuch <cortex@worlddomination.be> [Tue, 28 May 2019 12:35:34 +0200] rev 12629
[fix] parse cube version number without space in them
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 24 May 2019 17:09:10 +0200] rev 12628
Install patched yapps for test from an http archive
Instead of git which require git to be installed. Also downloading archive is faster than cloning the repository.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 11:39:36 +0100] rev 12627
[server/test] make test filename uniques
To avoid these pytest error when collecting the whole test suite:
import file mismatch:
imported module 'unittest_utils' has this __file__ attribute:
cubicweb/cubicweb/server/test/unittest_utils.py
which is not the same as the test file we want to collect:
cubicweb/cubicweb/test/unittest_utils.py
Move cubicweb/server/test/unittest_security.py to cubicweb/server/test/unittest_security.py
and cubicweb/test/unittest_utils.py to cubicweb/test/unittest_server_utils.py
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 24 May 2019 16:29:14 +0200] rev 12626
Merge 3.26
julien tayon <julien.tayon@logilab.fr> [Tue, 21 May 2019 10:50:08 +0200] rev 12625
[dataimport] Fix case when extid is text in use_extid_as_cwuri()
Extid can be bytes or text.
This avoid AttributeError: 'str' object has no attribute 'decode'
Noe Gaumont <ngaumont@logilab.fr> [Wed, 22 May 2019 11:34:08 +0200] rev 12624
[doc] fix key used in the hook example
The hook's regid is check_no_subsidiary_cycle.
Noe Gaumont <ngaumont@logilab.fr> [Wed, 22 May 2019 11:32:09 +0200] rev 12623
[doc] set_operation has been replaced by add_data
See the changelog https://cubicweb.readthedocs.io/en/3.26/changes/changelog/#id14
Noe Gaumont <ngaumont@logilab.fr> [Wed, 22 May 2019 11:30:52 +0200] rev 12622
[doc] check_cycle is a standard function
Noe Gaumont <ngaumont@logilab.fr> [Wed, 22 May 2019 11:29:49 +0200] rev 12621
[doc] fix several typos
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 21 May 2019 10:18:54 +0200] rev 12620
[pkg] make cubicweb[crypto] depends on pycryptodome instead of pycrypto
pycrypto isn't maintained anymore, the last release 2.6.1 is from 2014.
Use the drop-in replacement fork pycryptodome instead.
pycryptodome is packaged in debian starting from stretch-backports.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 21 May 2019 10:18:38 +0200] rev 12619
[crypto] Encode unicode strings in _cypherer()
pycrypto accept both bytes or string but pycryptodome, which will be introduced
in next changeset, doesn't accept this.
For backward compatibility, encode unicode strings in _cypherer()
julien tayon <julien.tayon@logilab.fr> [Thu, 16 May 2019 14:26:38 +0200] rev 12618
[ldapfeed] FIX: Unique Key violation when synchronizing with LDAPfeed
What was happening
==================
The bug appears when ldapfeed tries to insert a user while another user exists
exists with a different source.
Simple use case to reproduce:
- create a local user in cubicweb (source=system)
- sync with ldap
- ldapfeed will stop complaining user already exists.
Without next patch the test MUST fail with message:
cubicweb/server/sources/native.py:714: UniqueTogetherError
The ldapfeed is thus stopped ignoring any further ldap entries.
The proposal
============
Prior to this patch, the insertion was trying to create all CWUser with the
computed login from eeimporter.extid2eid (method process of DataFeedLDAPAdapter).
When a CWUser existed with a different cw_source ("system" for user created
with cubicweb for instance), it created a conflict.
To avoid collisions, in the extentities_generator method a bypass
was added at the insertion layer.
Prior to insertion the absence of the computed login is checked on a list of
all existing login from a different source.
If collision is detected, we skip the ldap record.
By short circuiting at the CWUser entity insertion level we also avoid to treat
CWGroup and EmailAddress related to this user.
Hence ensuring a behaviour that will not break existing instances.
(conservative approach: faced with ambiguity better do nothing than guess).
An error message is added stating explicitly the conflict.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 15 Mar 2019 12:12:23 +0100] rev 12617
Skip tests for ldapsource with python >= 3.7
Until someone works on fixing these, this should make our CI green
again.
I tried to use setupModule() to check for python version, but
pre_setup_database() is apparently called even when a SkipTest exception
is raised there. So handle this in that method.
(grafted from 4d68d20427dee4b6751a0f1f5511fec2a04f4782)
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 16 May 2019 17:18:29 +0200] rev 12616
Flake8 crypto module
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 16 May 2019 17:17:42 +0200] rev 12615
Make crypto module python3-compatible
* Remove usage of unicode() and decode the base64-encoded string in
encrypt();
* Encode the string received in decrypt() as (I supposed) it should come
from the result of encrypt().
Add tests for this module along the way.
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 04:42:59 +0200] rev 12614
[mod] make ViolatedConstraint actually display useful information
Move from:
(Pdb++) raise some_exception
*** ViolatedConstraint:
To:
(Pdb++) raise some_exception
*** ViolatedConstraint: constraint 'cstr56c2ab4b3154f21d08b067742ce5bd9d' is being violated by the query 'ALTER TABLE cw_Bibliography ADD CONSTRAINT cstr56c2ab4b3154f21d08b067742ce5bd9d CHECK(cw_item_type IN ('journalArticle', 'note', 'book', 'thesis', 'film', 'web page', 'manuscrit', 'tapuscrit'))'. You can run the inverted constraint on the database to list the problematic rows.
And save hours of debugging to actually understand what is going on.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 16 May 2019 09:40:28 +0200] rev 12613
Fix flake8 errors/warnings about import in cubicweb/_exceptions.py
We either ignore errors in case of name re-exports and drop re-exports
from old backwards compatibility. We fix the only occurrence of
NoSelectableObject being imported from cubicweb in tests and update the
import to use lgc instead.
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 04:47:27 +0200] rev 12612
add comment and # noqa on used import
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 04:47:10 +0200] rev 12611
remove unused import
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 02:39:42 +0200] rev 12610
[autopep8] E305 - Expected 2 blank lines after end of function or class
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 02:39:41 +0200] rev 12609
[autopep8] E303 - Remove extra blank lines
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 02:39:41 +0200] rev 12608
[autopep8] E302 - Add missing 2 blank lines
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 02:39:40 +0200] rev 12607
[autopep8] E301 - Add missing blank line
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 01:23:51 +0200] rev 12606
[enh] display CWConstraint type in its repr
This will change CWConstraint repr from something like:
<Entity CWConstraint 314282 [] at 140127700141904>
To:
<Entity CWConstraint 314282 of type UniqueConstraint [] at 140127700141904>
To help improve debugging UX a little bit.
Laurent Peuch <cortex@worlddomination.be> [Thu, 16 May 2019 01:23:51 +0200] rev 12605
[entities] display CWConstraint type in its repr
Laurent Peuch <cortex@worlddomination.be> [Wed, 15 May 2019 14:23:19 +0200] rev 12604
[changelog] document pyramid.ini automatic generation
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 15 May 2019 15:50:29 +0200] rev 12603
Flake8 cubicweb/pyramid/test/test_hooks.py
Laurent Peuch <cortex@worlddomination.be> [Wed, 15 May 2019 12:06:29 +0200] rev 12602
[pyramid/doc] bad docstring
Laurent Peuch <cortex@worlddomination.be> [Wed, 15 May 2019 12:06:15 +0200] rev 12601
[pyramid/misc] remove useless variable
Laurent Peuch <cortex@worlddomination.be> [Wed, 15 May 2019 12:05:52 +0200] rev 12600
[pyramid/test] add test for pyramid.ini generation
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 15 May 2019 15:44:35 +0200] rev 12599
Added tag 3.26.10 for changeset 74cc5de1ee6c
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 15 May 2019 15:44:26 +0200] rev 12598
[pkg] Version 3.26.10
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 10 May 2019 16:07:32 +0200] rev 12597
Move CWSchemaTC to RQLExpressionTC
The test actually doesn't require a cubicweb schema, except for testing
EmailAdress which is out of scope of the test (testing RQLExpression.transform_has_permission()).
Just move the test in existing RQLExpressionTC inheriting from TestCase and
rename the tests to be more explicit.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 17 Apr 2019 16:41:41 +0200] rev 12596
[skeleton] Drop py27 tox environment
Since we dropped py2 support from cubicweb, it does not make
much sense to keep it in skeleton from now on.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 17 Apr 2019 15:30:42 +0200] rev 12595
[skeleton] Do not ship Debian and RPM packaging files in sdist
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 17 Apr 2019 15:06:57 +0200] rev 12594
[skeleton] Add a check-manifest tox environment
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 10 May 2019 16:04:37 +0200] rev 12593
Fix pyramid tests
Followup fa292e9 which require cubicweb.session.secret to be set.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 10 May 2019 11:42:24 +0200] rev 12592
Fix flake8 and check-manifest
Followup fa292e9
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 10 May 2019 15:58:01 +0200] rev 12591
Merge 3.26
This fixes tests with psycopg2
Laurent Peuch <cortex@worlddomination.be> [Wed, 08 May 2019 21:37:13 +0200] rev 12590
DeprecationWarning: In future versions of Waitress clear_untrusted_proxy_headers will be set to True by default. You may opt-out by setting this value to False, or opt-in explicitly by setting this to True.
Source: https://docs.pylonsproject.org/projects/waitress/en/stable/arguments.html?highlight=clear_untrusted_proxy_headers
> This tells Waitress to remove any untrusted proxy headers ("Forwarded",
> "X-Forwared-For", "X-Forwarded-By", "X-Forwarded-Host", "X-Forwarded-Port",
> "X-Forwarded-Proto") not explicitly allowed by trusted_proxy_headers.
According to grep we don't use any of those headers so let's turn it on for
security reasons.
Laurent Peuch <cortex@worlddomination.be> [Wed, 08 May 2019 21:30:44 +0200] rev 12589
DeprecationWarning: The default pickle serializer is deprecated as of Pyramid 1.9 and it will be changed to use pyramid.session.JSONSerializer in version 2.0. Explicitly set the serializer to avoid future incompatibilities
. See "Upcoming Changes to ISession in Pyramid 2.0" for more information about this change.
As describe here https://docs.pylonsproject.org/projects/pyramid/en/1.10-branch/narr/sessions.html#pickle-session-deprecation
use a serializer that fallback on pickle if needed to avoid impacting users.
Laurent Peuch <cortex@worlddomination.be> [Wed, 08 May 2019 20:53:49 +0200] rev 12588
[pyramid/enh] generate pyramid.ini "create" and on "pyramid" command if needed
Laurent Peuch <cortex@worlddomination.be> [Wed, 08 May 2019 21:00:45 +0200] rev 12587
DeprecationWarning: The SafeConfigParser class has been renamed to ConfigParser in Python 3.2. This alias will be removed in future versions. Use ConfigParser directly instead.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 08 Apr 2019 11:24:53 +0200] rev 12586
Account for new psycopg2 exception classes mapping
From psycopg2 >= 2.8, specific exceptions are raised corresponding to
postgresql errors. E.g. a CheckViolation exception is raised instead of
a generic IntegrityError previously when a constraint violation occurs.
The way we intercept database errors, especially for constraint
violation, is not compliant with that because we do not catch subclasses
of IntegrityError in native source's doexec() method.
We fix this by checking for the presence of IntegrityError error in
exception class's mro. This is still overcomplicated and clumsy, because
we still use string comparison, but this is the best we can do as far as
I know. (A better fix would be 'isinstance(ex, IntegrityError)' but we
have no engine-independent error classes, so this is not possible.
Something like sqlalchemy's DBAPI Errors [1] might help:
https://docs.sqlalchemy.org/en/latest/errors.html#dbapi-errors)
Laurent Peuch <cortex@worlddomination.be> [Fri, 12 Apr 2019 02:26:28 +0200] rev 12585
[cubicweb-ctl] remove "cubicweb-ctl wsgi" command following pyramid standardization
Laurent Peuch <cortex@worlddomination.be> [Fri, 12 Apr 2019 12:31:14 +0200] rev 12584
Use secure hash algorithm in WebConfiguration.sign_text
Fix: PendingDeprecationWarning: HMAC() without an explicit digestmod argument is deprecated.
The default hash algorithm used by hmac.new is md5. As of today, md5 is so weak
that it's the equivalent of plaintext and can't be considered to be secured at all.
Therefor, we switch to a secure hash algorithm.
The rational for choosing sha3_512 is:
* the recommended algorithm is at least sha_256
* the stronger, the more secured and sha3_512 is the stronger available
* thinking about the future this should keep this part of the code safe long
enough before people think about checking it again
You can read more about choosing a secure hash algorithm in the NIST
recommendations https://csrc.nist.gov/Projects/Hash-Functions/NIST-Policy-on-Hash-Functions
This code modification should normally be transparent since check_text_sign is
exactly this code 'self.sign_text(text) == signature' and that sign_text is
only used in combination with it. The only impact is that the hash is going to
move from 32 char to 128 which might make html page a bit bigger and that
sha3_512 is slow to compute (which is a good thing for security)
Laurent Peuch <cortex@worlddomination.be> [Tue, 23 Apr 2019 09:33:52 +0200] rev 12583
[enh] don't catch all exceptions in notification hooks during tests
Noe Gaumont <ngaumont@logilab.fr> [Thu, 18 Apr 2019 15:09:36 +0200] rev 12582
[doc] add a reference to static-messages.pot usage
Noe Gaumont <ngaumont@logilab.fr> [Thu, 18 Apr 2019 15:10:35 +0200] rev 12581
[doc] Clarify sentences
Noe Gaumont <ngaumont@logilab.fr> [Thu, 18 Apr 2019 15:05:13 +0200] rev 12580
[doc] Fix format and typo
Nsukami Patrick <ndkpatt at gmail dot com> [Thu, 18 Apr 2019 04:40:23 +0000] rev 12579
Fix DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated
Nsukami Patrick <ndkpatt at gmail dot com> [Thu, 18 Apr 2019 04:34:34 +0000] rev 12578
Fix DeprecationWarning: invalid escape sequence
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 16 Apr 2019 15:49:03 +0200] rev 12577
[devtools/testlib] avoid hidding AttributeError in create_user()
commit() might raise a AttributeError too.
Use getattr(req, 'cnx', req) instead, which is a form already used to get the real cnx
in some code:
cubicweb/rset.py:577: cnx = getattr(self.req, 'cnx', self.req)
cubicweb/schema.py:353: with getattr(_cw, 'cnx', _cw).security_enabled(read=False):
We could use if hasattr(req, 'commit') here too but it lead to 3 additionals lines.
Maybe we should have commit() and rollback() on
cubicweb.web.request.ConnectionCubicWebRequestBase too ?
Nsukami Patrick <ndkpatt at gmail dot com> [Wed, 10 Apr 2019 17:59:17 +0000] rev 12576
Fix DeprecationWarning: invalid escape sequence \
Laurent Peuch <cortex@worlddomination.be> [Fri, 12 Apr 2019 11:56:13 +0200] rev 12575
DeprecationWarning: The 'warn' method is deprecated, use 'warning' instead
Laurent Peuch <cortex@worlddomination.be> [Fri, 12 Apr 2019 13:52:17 +0200] rev 12574
[mod] remove backward compatible code for passlib and force modern version
Laurent Peuch <cortex@worlddomination.be> [Fri, 12 Apr 2019 11:54:42 +0200] rev 12573
DeprecationWarning: Please use assertEqual instead.
Laurent Peuch <cortex@worlddomination.be> [Fri, 12 Apr 2019 17:25:40 +0200] rev 12572
DeprecationWarning: Please use assertRaisesRegex instead.
Laurent Peuch <cortex@worlddomination.be> [Thu, 11 Apr 2019 20:15:09 +0200] rev 12571
DeprecationWarning: inspect.getargspec() is deprecated since Python 3.0, use inspect.signature() or inspect.getfullargspec()
Laurent Peuch <cortex@worlddomination.be> [Thu, 11 Apr 2019 16:47:27 +0200] rev 12570
[README] add testing instructions
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 05 Apr 2019 12:19:03 +0200] rev 12569
Add pytest-subtests to dev requirements
This pytest plugin adds support for unittest's TestCase.subTest (for
Python >= 3.4). Since we we now only support python3 and since we use a
fair amount of these, let's benefit of better reporting by using this
plugin.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 26 Mar 2019 16:22:31 +0100] rev 12568
[test] use unittest.mock instead of mock library
Now that we use Python 3 only, this is possible.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 05 Apr 2019 17:58:19 +0200] rev 12567
Drop python2 support
This mostly consists in removing the dependency on "six" and updating
the code to use only Python3 idioms.
Notice that we previously used TemporaryDirectory from
cubicweb.devtools.testlib for compatibility with Python2. We now
directly import it from tempfile.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 05 Apr 2019 17:21:14 +0200] rev 12566
Merge with 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 05 Apr 2019 17:40:02 +0200] rev 12565
Remove unused imports in cubicweb.pyramid.config
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 05 Apr 2019 17:20:01 +0200] rev 12564
Added tag 3.26.9 for changeset 4d6909de765a
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 05 Apr 2019 17:19:56 +0200] rev 12563
[pkg] Version 3.26.9
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 17:00:55 +0100] rev 12562
[pyramid/security] use cryptographically secure random generator
Based on django source code in case SystemRandom is not available.
According to python documentation:
https://docs.python.org/2/library/random.html
> Warning
> The pseudo-random generators of this module should not be used for security
> purposes. Use os.urandom() or SystemRandom if you require a cryptographically
> secure pseudo-random number generator.
Arthur Lutz <arthur.lutz@logilab.fr> [Thu, 04 Apr 2019 14:11:40 +0200] rev 12561
Reclosing branch after merge
Arthur Lutz <arthur.lutz@logilab.fr> [Thu, 04 Apr 2019 13:49:34 +0200] rev 12560
Merging heads of old, closed branch
Arthur Lutz <arthur.lutz@logilab.fr> [Thu, 04 Apr 2019 14:08:10 +0200] rev 12559
Reclosing branch after merge
Arthur Lutz <arthur.lutz@logilab.fr> [Thu, 04 Apr 2019 13:45:23 +0200] rev 12558
Merging heads of old, closed branch
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 11:15:28 +0100] rev 12557
[doc/changes] document that legacy cube support has been dropped
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 11:13:12 +0100] rev 12556
[doc] replace legacy import to new style cube import in various places
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 11:09:29 +0100] rev 12555
[web/views] drop deprecated module cubicweb.web.views.timeline
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 11:06:02 +0100] rev 12554
[web/views] drop deprecated module cubicweb.web.views.massmailing
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 11:05:35 +0100] rev 12553
[web/views] drop deprecated module cubicweb.web.views.isioc
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 11:04:51 +0100] rev 12552
[web/views] drop deprecated module cubicweb.web.views.embedding
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 11:04:07 +0100] rev 12551
[web/views] drop deprecated module cubicweb.web.views.igeocodable
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 11:00:55 +0100] rev 12550
[pyramid/core] drop fallback import of legacy cubes
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 10:33:54 +0100] rev 12549
[cwconfig] drop importing legacy cubes
This finally drop support for legacy cubes.
In cwconfig, don't load modules in the "cubes" namespace.
In cube_pkginfo() handle CW_MIGRATION_MAP which wasn't working with new style cube.
Drop all method specific to legacy cubes importer: cubes_search_path(), extrapath(), cls_adjust_sys_path()
Drop environment variables related to legacy cubes: CW_CUBES_PATH and CW_CUBES_DIR
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 10:11:36 +0100] rev 12548
[doc] better documentation for "cubicweb-ctl newcube"
cubicweb-ctl newcube create cubicweb-<name> in current directory.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 10:09:49 +0100] rev 12547
[test] make unittest_cwconfig.py does not depend on legacy cube machinery
By dropping legacy cube tests in various places.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 10:07:02 +0100] rev 12546
[devtools/test] drop legacy cube i18n tests
test_i18ncube_legacy_layout() is droped and make others tests uses a new style
cube "cubicweb_i18ntestcube", so it doesn't depends on legacy cube machinery.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Mar 2019 10:04:23 +0100] rev 12545
[server/test] make unittest_migractions.py use new style cubes
MigrationTC used old cube layout in
cubicweb/server/test/data-migractions/cubes, move them to new style cubes as
"cubicweb_<cubename>" in "apphome" (cubicweb/server/test/data-migractions/)
which is added to PYTHONPATH by CubicWebTC.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 27 Mar 2019 16:25:06 +0100] rev 12544
[cwconfig] drop _cube_modname
Since we drop support for legacy cubes, this is equivalent to _cube_pkgname()
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 27 Mar 2019 16:19:50 +0100] rev 12543
[cwconfig] drop legacy cube importer
We don't want to support legacy cubes anymore.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 22 Mar 2019 17:42:36 +0100] rev 12542
Drop more deprecated code
This follows up on changeset a8c1ea390400, in which code deprecated
using logilab.common.deprecation got dropped. Now we also drop code
deprecated using stdlib's warn(<msg>, DeprecationWarning).
Notice that, as a consequence of dropping old/new etypes aliases in
cubicweb/schema.py, we drop the import ETYPE_NAME_MAP (no longer
needed); but since other modules imported that name from
cubicweb.schema, we need to update the import statement to use
"cubicweb" directly.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 26 Mar 2019 13:08:13 +0100] rev 12541
Flake8 cubicweb/cwvreg.py
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 22 Mar 2019 17:32:30 +0100] rev 12540
Drop deprecated "boxes" and "contentnavigation" registries
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 22 Mar 2019 17:29:15 +0100] rev 12539
Drop deprecated CWCache entity type
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 22 Mar 2019 17:30:09 +0100] rev 12538
Update i18n after "recent" changes
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 22 Mar 2019 15:53:24 +0100] rev 12537
Drop repair_file_1-9_migration.py
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 22 Mar 2019 14:48:22 +0100] rev 12536
Drop a left-over 3.22 deprecation warning
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 27 Mar 2019 15:53:00 +0100] rev 12535
[doc] fix reference to ~src/cubes in tutorial
~src/cubes refer to the $HOME/cubes directory of "src" user while ~/src/cubes
refer to $HOME/src/cubes directory of current user.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 27 Mar 2019 15:52:40 +0100] rev 12534
[doc] replace cubicweb-ctl start by cubicweb-ctl pyramid
Since twisted support is gone.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 27 Mar 2019 15:51:50 +0100] rev 12533
[doc] make the tutorial use a python3 virtualenv
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 27 Mar 2019 15:43:53 +0100] rev 12532
[doc] Update README "Getting started"
* install using pip and with pyramid in a virtualenv
* link to pyramid.ini documentation
* Use pyramid to start application since twisted support is gone
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 21 Mar 2019 14:36:25 +0100] rev 12531
Flake8 cubicweb/devtools/httptest.py
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 21 Mar 2019 14:33:54 +0100] rev 12530
Remove Twisted web server
Twisted web server is not used anymore and has been superseded by
pyramid many years ago. Furthermore, our usage is not compatible with
Python 3. So we drop the "etwist" sub-package.
As a consequence, "all-in-one" configuration type gets dropped as it was
Twisted-specific. We resurrect it in cubicweb/pyramid/config.py by only
keeping options used by the "pyramid". Similarly, we introduce a
AllInOneCreateHandler in cubicweb/pyramid/pyramidctl.py that is
basically the one that lived in cubicweb/etwist/twctl.py and is used to
create the "all-in-one" instance. Added a TODO here about "pyramid.ini"
that could be generated at the end of bootstrap() method.
In cubicweb/devtools/httptest.py, CubicWebServerTC is now equivalent to
CubicWebWsgiTC and the latter is dropped.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 21 Mar 2019 12:05:30 +0100] rev 12529
Separate twisted-specific configuration from WebConfigurationBase class
This is in preparation of dropping the Twisted web server backend.
We thus draw a clearer line between what's specific to twisted from
what's generic by moving WebConfigurationBase class into
cubicweb/web/webconfig.py and only keeping twisted-related in
AllInOneConfiguration (still living in cubicweb/etwist/twconfig.py).
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 21 Mar 2019 11:50:31 +0100] rev 12528
Flake8 cubicweb/web/webconfig.py
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 21 Mar 2019 11:47:10 +0100] rev 12527
Flake8 cubicweb/etwist/twconfig.py
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 17:16:34 +0100] rev 12526
Remove ctl commands using the Twisted backend
This backend is not maintained, very likely no longer used in any recent
instance, and not supported in Python 3.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 17:04:02 +0100] rev 12525
Flake8 cubicweb/cwctl.py
* run autopep8 on the file
* fixed unused imports
* rename "version" import as "cw_version" in order not to shadow local
variables
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 16:53:34 +0100] rev 12524
Remove _handle_win32() method from "create" command class
This method generates code in a file using etwist module that we are
about to drop.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 15 Mar 2019 12:12:23 +0100] rev 12523
Skip tests for ldapsource with python >= 3.7
Until someone works on fixing these, this should make our CI green
again.
I tried to use setupModule() to check for python version, but
pre_setup_database() is apparently called even when a SkipTest exception
is raised there. So handle this in that method.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 27 Mar 2019 09:25:44 +0100] rev 12522
[doc] Update cubicweb-ctl page about how to run an instance
* remove mention of start/stop/restart/status commands that do not exist anymore
* briefly mention the "pyramid" and point to respective documentation page
* mention that a WSGI server should be used in production
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 27 Mar 2019 09:21:18 +0100] rev 12521
[doc] Drop mention of the "pyramid" cube
This cube got merged into cubicweb several versions ago.
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Mar 2019 14:28:30 +0100] rev 12520
[cli/enh] on 'shell' or migration command, use ipython if available
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 19 Mar 2019 13:17:47 +0100] rev 12519
[web/test] drop dependency on third party cubes
Drop dependency on cubicweb-file, cubicweb-blog and cubicweb-tag for cubicweb/web/test
Copy required parts of cubes (schema, entities, views and hooks) into
cubicweb/web/test/data/cubicweb-<cube> that make tests pass.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 15 Mar 2019 18:07:18 +0100] rev 12518
[test] drop dependency on third party cubes
Drop dependency on cubicweb-file, cubicweb-localperms, cubicweb-tag and
cubicweb-comment for cubicweb.test and cubicweb.sobjects.test
Move cubicweb/test/data/libpython/cubicweb_* to cubicweb/test/data, so it's
included in PYTHONPATH.
Add missing parts of schema, entities, views, hooks that make tests pass.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 15 Mar 2019 17:12:20 +0100] rev 12517
[test] drop CubicWebConfigurationWithLegacyCubesTC
This is used to test legacy cube import which is planned for removal
in cubicweb 3.27, so drop the code.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 15 Mar 2019 17:10:16 +0100] rev 12516
[test] drop unittest_cubes.py
This is used to test legacy cube import which is planned for removal in
cubicweb 3.27, so drop the code.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 19 Mar 2019 14:26:51 +0100] rev 12515
[server/test] do not depend on third party cubes
Drop requirement of basket, card, comment, file, localperms and tag cubes for
cubicweb.server tests.
Copy needed part of schema, entities, views, hooks into the
cubicweb/server/test/data directory (which is included in PYTHONPATH for
CubicWebTC tests).
For migration tests which use different "datapath", use symlinks to have dependent cubes importables.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 15 Mar 2019 15:51:27 +0100] rev 12514
[server/test] drop unused variable initialization in OperationsTC.setUp()
Variable "self.hm" is unused
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 13 Mar 2019 14:03:45 +0100] rev 12513
[server/test] bootstrap config in setUpModule function
This is test initialization, so use the setUpModule function for this
Philippe Pepiot <philippe.pepiot@logilab.fr> [Mon, 11 Mar 2019 17:43:23 +0100] rev 12512
[schema] drop monkeypatch "name_for" on BaseConstraint
BaseConstraint doesn't have "name_for" method, this is just an addition for
cubicweb needs.
Implement this as a function instead of a monkeypatch to avoid having
"name_for" not defined because cubicweb.schema hasn't been imported.
In particular this fix running cubicweb/server/test/unittest_schema2sql.py::SQLSchemaTC::test_known_values alone.
Laurent Peuch <cortex@worlddomination.be> [Thu, 14 Mar 2019 16:17:49 +0100] rev 12511
[fix] this check was too restrictive and broke tests
Laurent Peuch <cortex@worlddomination.be> [Thu, 14 Mar 2019 16:09:26 +0100] rev 12510
[fix] exception type has changed
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Wed, 13 Mar 2019 10:21:39 +0100] rev 12509
[server.rqlannotation] refactor to make class SQLGenAnnotator consistent
_annotate_select() takes SQLGenAnnotator as a first argument and is
not used anywhere except in SQLGenAnnotator. This looks like a
method to me. Let us fold it into its class.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 12:08:37 +0100] rev 12508
Drop most of deprecated code
As in previous changesets, most code has been deprecated since a very
long time. This changeset concerns "core" cubicweb modules
(e.g. "server", "appobjects") for which it's not easy to handle change
atomically.
In cubicweb/server/querier.py, we adjust empty_rset() function as a
result of "rqlst" argument of ResultSet being dropped. (There was no use
of the keyword argument anyways.)
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 14:45:35 +0100] rev 12507
Drop deprecated code in cubicweb.hooks
Changelog entry will come in a later changeset.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 14:45:27 +0100] rev 12506
Drop deprecated code in cubicweb.entities
Also dropped an unused import along the way.
Changelog entry will come in a later changeset.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 14:45:18 +0100] rev 12505
Drop deprecated code in cubicweb.devtools
Changelog entry will come in a later changeset.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 14:45:03 +0100] rev 12504
Drop deprecated code in cubicweb.dataimport
We actually drop *most* of deprecated code in this subpackage. What's
left is the MetaGenerator class in (cubicweb/dataimport/stores.py) which
is tricky to remove as it's still internally used by cubicweb.
Changelog entry will come in a later changeset.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 14:43:18 +0100] rev 12503
Drop most deprecated code in cubicweb.web
This includes both Python and JavaScript code. Most code has been
deprecated since a very long time (versions 3.1x mostly, more than 5
years ago, and a few things until 3.24).
There are still a few deprecated things, most of which are actually used
within cubicweb (or in cubes we depend on for tests). I don't know what
to do with these...
Removed a couple of unused imports along the way.
Changelog entry will come in a later changeset.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 13 Mar 2019 13:37:49 +0100] rev 12502
[web] use Separator "component" instead of deprecated BoxSeparator widget
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 13 Mar 2019 13:36:38 +0100] rev 12501
Flake8 cubicweb/web/box.py
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 14:38:55 +0100] rev 12500
[test] Remove upper bound for cubicweb-localperms
Version 0.4.0 does not use a deprecated API that we are planning to drop
in forthcoming changesets.
This requires changing expected values in unittest_cwconfig.py where we
scan install cubes.
* In CubicWebConfigurationTC.test_available_cubes(), localperms
disappears from the list of expected cubes because this test method
will look for new style cubes in located in cubicweb/test/data/libpython/
(we patch pkg_resources.iter_entry_points()) as well as old style
cubes installed in $PREFIX/share/cubicweb/cubes; since the new
cubicweb-localperms version is new-style, it won't be catched by this
method.
* In CubicWebConfigurationWithLegacyCubesTC.test_available_cubes(),
localperms is still listed, but now with the package name, because
this method will simply look at installed cubes whether old or new
style.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 14 Mar 2019 16:44:53 +0100] rev 12499
[test] Make the expected value explicit in CubicWebConfigurationWithLegacyCubesTC.test_available_cubes()
This will help with the next changeset, and avoiding computation in
tests is a good thing in general.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 13 Mar 2019 17:21:27 +0100] rev 12498
[test] Inline _test_available_cubes() method in cwconfig tests
Improves readability.
Laurent Peuch <cortex@worlddomination.be> [Thu, 14 Mar 2019 09:38:20 +0100] rev 12497
[DX] adding error messages to {ResultSet,ActionsRegistry}.possible_actions
Try to make it more accessible, when we first encountered these errors
it it didn't made any sense to us.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Tue, 12 Mar 2019 23:45:15 +0100] rev 12496
[server/querier] remove useless indirection QuerierHelper._annotate
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Tue, 12 Mar 2019 23:04:57 +0100] rev 12495
[server] remove useless indirection ExecutionPlan.sqlannotate
Simpler is better. Use directly ExecutionPlan.querier.sqlgen_annotate.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Tue, 12 Mar 2019 23:20:50 +0100] rev 12494
[web] removed unused imports in basecomponents
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 13 Mar 2019 14:01:10 +0100] rev 12493
[test] Depends on psycopg2-binary
Avoids the following warning:
The psycopg2 wheel package will be renamed from release 2.8; in order
to keep installing from binary please use "pip install psycopg2-binary"
instead. For details see:
<http://initd.org/psycopg/docs/install.html#binary-install-from-pypi
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Mar 2019 11:40:59 +0100] rev 12492
[doc/changelog] the removal of next_tabindex produce an error not in the changelog
When one tried to migrate to 3.25, the error "class X initialization doesn't
have a settabindex argument" can happen but the word "settabindex" is not
present in the changelog which makes it hard to find to which modification this
error is related.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 11 Mar 2019 14:34:14 +0100] rev 12491
Merge with branch 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 08 Mar 2019 14:35:59 +0100] rev 12490
[py3.7,test] Use cubicweb-file >= 2.2.2
This includes changeset aa4a3a3d0c18 fixing import of
os.errno.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 08 Mar 2019 11:58:30 +0100] rev 12489
[flake8] Fix errors in cubicweb/ext/test/unittest_rest.py
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 08 Mar 2019 11:56:05 +0100] rev 12488
[test] Shorten prefix string in test_rql_role_with_unknown_vid
With Python3.7, this test fails as the error message returned by
rest_publish() is:
<p>an error occurred while interpreting this rql directive: ObjectNotFound('toto')</p>
while we previously assumed a comma after 'toto'.
Fixing this by only shortening the prefix used in out.startswith().
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 08 Mar 2019 11:52:31 +0100] rev 12487
[flake8] fix errors in cubicweb_i18ntestcube/views.py test file
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 08 Mar 2019 11:50:20 +0100] rev 12486
[test] Pass __module__ upon instantiation of RegistrableInstance
This gets rid of the deprecation warning from logilab.common.registry:
DeprecationWarning: instantiate MyAFS with __module__=__name__
and solves a test error on Python 3.7.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 08 Mar 2019 12:00:47 +0100] rev 12485
Added tag 3.26.8 for changeset 91f75319a726
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 07 Mar 2019 11:56:01 +0100] rev 12484
[pkg] Version 3.26.8
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:28:17 +0100] rev 12483
[doc] didn't had any questions
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:30:31 +0100] rev 12482
[doc] missing import, cw now require this explicitely
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:30:12 +0100] rev 12481
[doc] add actual link to previous post
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:29:54 +0100] rev 12480
[doc] missing import in code example
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:29:44 +0100] rev 12479
[doc] add a note because uiprops.py is not generated anymore by default
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:29:23 +0100] rev 12478
[doc] recommend pip instead of apt for installing things
According to a discussion on XMPP we should recommend pip instead.
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:28:43 +0100] rev 12477
[doc] fix, link to internal doc since it's not the blog post anymore
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:27:56 +0100] rev 12476
[doc] also show command with sqlite since it's recommended
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:26:33 +0100] rev 12475
[doc] fix, the cube name was used, it was the instance named that was needed
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:25:59 +0100] rev 12474
[doc] it's a tutorial, not a blog post anymore
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:25:44 +0100] rev 12473
[doc] make example more redable
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:25:27 +0100] rev 12472
[doc] uses :file:`name` everywhere + indicate file when it's not present
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:23:37 +0100] rev 12471
[doc] english typos
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:23:07 +0100] rev 12470
[doc] pep8/retab in code examples
Laurent Peuch <cortex@worlddomination.be> [Wed, 27 Feb 2019 13:41:34 +0100] rev 12469
[doc] correct import for i18n
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:46:39 +0100] rev 12468
[doc] pep8 and retab in tutorial code example
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 19:08:44 +0100] rev 12467
[doc] correct pip command to have needed dependancies to use the start command
I know we want to remove this command but in the meantime having this
documentation working seems like something good.
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:57:24 +0100] rev 12466
[doc] explain the difference between a relation and an attribute
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:57:05 +0100] rev 12465
[doc] plural
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:56:42 +0100] rev 12464
[doc] misc, put every reference to something in the code between backquotes
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:54:46 +0100] rev 12463
[doc] bold to make reading more obvious
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:54:23 +0100] rev 12462
[doc] style, switch to bullet points list to make things easier to read
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:53:39 +0100] rev 12461
[doc] explains what the <X.Y.Z> means
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:53:03 +0100] rev 12460
[doc] command output style has changed
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:51:36 +0100] rev 12459
[doc] always put file name for code example and uses :file:`path` syntax everywhere
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:49:24 +0100] rev 12458
[doc] explicitely give the local server url to make this step more obvious
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:48:51 +0100] rev 12457
[doc] start the server in debug mode, it's easier during learning
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:48:07 +0100] rev 12456
[doc] recommend sqlite during tutorial because it's simplier to use
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:47:35 +0100] rev 12455
[doc] add a link to every cube documentation page
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:47:03 +0100] rev 12454
[doc] make this step more obvious
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:42:29 +0100] rev 12453
[doc] move to latest CW version for cube creation
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:15:26 +0100] rev 12452
[doc] missng import for i18n in example
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:10:47 +0100] rev 12451
[doc] unused import in example
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 15:25:23 +0100] rev 12450
[doc] output has changed
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 15:18:09 +0100] rev 12449
[doc] blanks spaces to allow example to breath and be more lisible
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 15:16:22 +0100] rev 12448
[doc] default tests template has changed
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 15:13:45 +0100] rev 12447
[doc] default generated filename as changed
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 10:05:38 +0100] rev 12446
[doc] rst syntax bug, blank line needed before item list
Laurent Peuch <cortex@worlddomination.be> [Fri, 22 Feb 2019 15:16:26 +0100] rev 12445
[doc] add link to cubes contribution document
Laurent Peuch <cortex@worlddomination.be> [Fri, 22 Feb 2019 15:48:34 +0100] rev 12444
[doc] link to current documentation, not old cubicweb.org doc
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 15:51:21 +0100] rev 12443
[doc] translate french to english
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:59:42 +0100] rev 12442
[doc] typo, 'CW' doesn't exist in the example
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:59:13 +0100] rev 12441
[doc] always indicate the file in which the code should be put
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:58:50 +0100] rev 12440
[doc] respect pep8 in code examples
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:58:26 +0100] rev 12439
[doc] serie a small improvments
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:55:02 +0100] rev 12438
[doc] typo, the field is "name" not "title"
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:53:48 +0100] rev 12437
[doc] fix, command "create" is missing base cube
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:48:52 +0100] rev 12436
[doc] improve blog tutorial first steps and explain common errors
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 11:38:19 +0100] rev 12435
[doc] new behavior in virtualenv since 3.26
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 29 Jan 2019 14:04:28 +0100] rev 12434
[skeleton] use python3 flake8
In tox "flake8" environment, use python 3 virtualenv, so we can check for
python3 incompatible syntax.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 29 Jan 2019 14:02:19 +0100] rev 12433
[skeleton] drop whitelist_externals for flake8
whitelist_externals makes sense when used with sitepackages=true.
In this case it will always rely on $VIRTUAL_ENV/bin/flake8 so, the
whitelist_externals has no effect.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Mon, 29 Oct 2018 10:04:31 +0100] rev 12432
Fix flake8 issues since release 3.6.0
Flake8 had a new release which raise new issues, namely:
W504: line break after binary operator
F841: local variable 'ex' is assigned to but never used
W605: invalid escape sequence
F821: undefined name 'buffer' (noqa seems the only way to avoid this false positive)
Also pin flake8>=3.6 in our tests and make explicit that we use python3 to run
flake8 tests.
Laurent Wouters <lwouters@cenotelie.fr> [Tue, 09 Oct 2018 16:24:12 +0200] rev 12431
Fix typo in RDFS URI
Laurent Wouters <lwouters@cenotelie.fr> [Tue, 24 Apr 2018 10:19:42 +0200] rev 12430
[server] Fixed issue with the adapters cache of a cloned EditedEntity
The adapters' cache of the entity within an EditedEntity used to be copied along
the entity itself during a cloning operation of the EditedEntity. This raises
an issue when the adapters' cache is not empty and contains cached values
linking to transaction-specific data (or the transaction itself). This prevents
the clone EditedEntity being used in a transaction outside the one that created
it.
This change resets the adapters' cache of the new copy so that no cached value
remain. The new copy can then be used in a new transaction afterwards.
Samuel Trégouët <samuel.tregouet@logilab.fr> [Thu, 16 Aug 2018 12:31:44 +0200] rev 12429
[py37] `async` is now a reserved keyword
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 11 Jul 2018 09:18:57 +0200] rev 12428
[skeleton] Use "py3" as tox environment instead of "py34"
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Jun 2018 10:17:15 +0200] rev 12427
[views/startup] drop a duplicate rql query in manage view
Counting entities in `nb` is already done above this code, regression introduced by a85db6fa
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 15 Jun 2018 17:42:50 +0200] rev 12426
Depend on cubicweb-file >= 2.0.0
I applied V1 of the patch, but V2 contained this extra hunk...
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 11 Jun 2018 16:50:38 +0200] rev 12425
[test] Update webconfig's tests accounting for cubicweb-file being now a package
WebconfigTC.test_locate_all_files and WebconfigTC.test_locate_resource
assumed that cubicweb-file was installed in <share>/cubes/file whereas,
from the latest release, it is now a standard Python package thus
installed in site-packages as cubicweb_file. We simply update base
directory of these two tests.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Wed, 06 Jun 2018 18:54:24 +0200] rev 12424
[widgets.js] fix obvious bug detected by sonar
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Wed, 06 Jun 2018 18:37:16 +0200] rev 12423
[views/uicfg] obvious bug detected by sonar
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 06 Jun 2018 14:20:16 +0200] rev 12422
[style] Make toolsutils.py flake8-clean
Run `autopep8 --max-line-length 100 -i cubicweb/toolsutils.py` and fixed
unused imports.
David Douard <david.douard@logilab.fr> [Tue, 24 Apr 2018 15:21:38 +0200] rev 12421
[test/rset] typo
David Douard <david.douard@logilab.fr> [Tue, 24 Apr 2018 14:04:43 +0200] rev 12420
[test/rset] flake8
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 05 Mar 2019 13:52:52 +0100] rev 12419
[py3] import configparser from six.moves instead of using a try/except
Using six is better than the try/except because it clearly indicates
compatibility code. Also, when using tools such as vermin which relies
on AST, it helps getting rid of false compatibility errors.
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:28:17 +0100] rev 12418
[doc] didn't had any questions
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:30:31 +0100] rev 12417
[doc] missing import, cw now require this explicitely
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:30:12 +0100] rev 12416
[doc] add actual link to previous post
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:29:54 +0100] rev 12415
[doc] missing import in code example
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:29:44 +0100] rev 12414
[doc] add a note because uiprops.py is not generated anymore by default
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:29:23 +0100] rev 12413
[doc] recommend pip instead of apt for installing things
According to a discussion on XMPP we should recommend pip instead.
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:28:43 +0100] rev 12412
[doc] fix, link to internal doc since it's not the blog post anymore
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:27:56 +0100] rev 12411
[doc] also show command with sqlite since it's recommended
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:26:33 +0100] rev 12410
[doc] fix, the cube name was used, it was the instance named that was needed
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:25:59 +0100] rev 12409
[doc] it's a tutorial, not a blog post anymore
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:25:44 +0100] rev 12408
[doc] make example more redable
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:25:27 +0100] rev 12407
[doc] uses :file:`name` everywhere + indicate file when it's not present
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:23:37 +0100] rev 12406
[doc] english typos
Laurent Peuch <cortex@worlddomination.be> [Tue, 26 Feb 2019 16:23:07 +0100] rev 12405
[doc] pep8/retab in code examples
Laurent Peuch <cortex@worlddomination.be> [Wed, 27 Feb 2019 13:41:34 +0100] rev 12404
[doc] correct import for i18n
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:46:39 +0100] rev 12403
[doc] pep8 and retab in tutorial code example
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 19:08:44 +0100] rev 12402
[doc] correct pip command to have needed dependancies to use the start command
I know we want to remove this command but in the meantime having this
documentation working seems like something good.
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:57:24 +0100] rev 12401
[doc] explain the difference between a relation and an attribute
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:57:05 +0100] rev 12400
[doc] plural
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:56:42 +0100] rev 12399
[doc] misc, put every reference to something in the code between backquotes
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:54:46 +0100] rev 12398
[doc] bold to make reading more obvious
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:54:23 +0100] rev 12397
[doc] style, switch to bullet points list to make things easier to read
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:53:39 +0100] rev 12396
[doc] explains what the <X.Y.Z> means
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:53:03 +0100] rev 12395
[doc] command output style has changed
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:51:36 +0100] rev 12394
[doc] always put file name for code example and uses :file:`path` syntax everywhere
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:49:24 +0100] rev 12393
[doc] explicitely give the local server url to make this step more obvious
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:48:51 +0100] rev 12392
[doc] start the server in debug mode, it's easier during learning
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:48:07 +0100] rev 12391
[doc] recommend sqlite during tutorial because it's simplier to use
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:47:35 +0100] rev 12390
[doc] add a link to every cube documentation page
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:47:03 +0100] rev 12389
[doc] make this step more obvious
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:42:29 +0100] rev 12388
[doc] move to latest CW version for cube creation
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:15:26 +0100] rev 12387
[doc] missng import for i18n in example
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 18:10:47 +0100] rev 12386
[doc] unused import in example
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 15:25:23 +0100] rev 12385
[doc] output has changed
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 15:18:09 +0100] rev 12384
[doc] blanks spaces to allow example to breath and be more lisible
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 15:16:22 +0100] rev 12383
[doc] default tests template has changed
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 15:13:45 +0100] rev 12382
[doc] default generated filename as changed
Laurent Peuch <cortex@worlddomination.be> [Thu, 21 Feb 2019 10:05:38 +0100] rev 12381
[doc] rst syntax bug, blank line needed before item list
Laurent Peuch <cortex@worlddomination.be> [Fri, 22 Feb 2019 15:16:26 +0100] rev 12380
[doc] add link to cubes contribution document
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 27 Feb 2019 13:36:31 +0100] rev 12379
Merge 3.26
Laurent Peuch <cortex@worlddomination.be> [Fri, 22 Feb 2019 15:48:34 +0100] rev 12378
[doc] link to current documentation, not old cubicweb.org doc
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 13 Feb 2019 14:40:39 +0100] rev 12377
Explicitly require repoze.lru for Pyramid tests
This used to be pulled by pyramid but the dependency got dropped in
pyramid version 1.10, see:
https://docs.pylonsproject.org/projects/pyramid/en/latest/whatsnew-1.10.html#backward-incompatibilities
We already have an explicit dependency in setup.py, but it was missing
for tests.
Perhaps we could simply use '.[pyramid]' in this requirements file? Not
sure what side effect it'd have though...
Laurent Peuch <cortex@worlddomination.be> [Wed, 13 Feb 2019 17:25:09 +0100] rev 12376
[cubicweb-ctl] make uid option obvious
Laurent Peuch <cortex@worlddomination.be> [Wed, 13 Feb 2019 17:32:41 +0100] rev 12375
[README] point to xmpp room for contributors
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 15:31:12 +0100] rev 12374
[doc] link to README regarding how to contribute to the code base
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 15:23:29 +0100] rev 12373
[README] improve contribution section with links and command examples
Laurent Peuch <cortex@worlddomination.be> [Wed, 13 Feb 2019 11:39:46 +0100] rev 12372
[README] point to logilab's jenkins in tests section
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 16:11:54 +0100] rev 12371
[pyramid] improve pyramid warning with link to doc on how to write pyramid.ini file
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 15:51:21 +0100] rev 12370
[doc] translate french to english
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:59:42 +0100] rev 12369
[doc] typo, 'CW' doesn't exist in the example
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:59:13 +0100] rev 12368
[doc] always indicate the file in which the code should be put
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:58:50 +0100] rev 12367
[doc] respect pep8 in code examples
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:58:26 +0100] rev 12366
[doc] serie a small improvments
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:55:02 +0100] rev 12365
[doc] typo, the field is "name" not "title"
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:53:48 +0100] rev 12364
[doc] fix, command "create" is missing base cube
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:48:52 +0100] rev 12363
[doc] improve blog tutorial first steps and explain common errors
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 14:43:45 +0100] rev 12362
[doc] how to install pyramid or twisted application server
Laurent Peuch <cortex@worlddomination.be> [Tue, 12 Feb 2019 11:38:19 +0100] rev 12361
[doc] new behavior in virtualenv since 3.26
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 29 Jan 2019 14:04:28 +0100] rev 12360
[skeleton] use python3 flake8
In tox "flake8" environment, use python 3 virtualenv, so we can check for
python3 incompatible syntax.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 29 Jan 2019 14:02:19 +0100] rev 12359
[skeleton] drop whitelist_externals for flake8
whitelist_externals makes sense when used with sitepackages=true.
In this case it will always rely on $VIRTUAL_ENV/bin/flake8 so, the
whitelist_externals has no effect.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Mon, 29 Oct 2018 16:39:21 +0100] rev 12358
Add changelog note for running tests with pytest-xdist
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 26 Oct 2018 17:12:26 +0200] rev 12357
Make test database template creation concurrent
build_db_cache() is used in tests to create test database templates, i.e.
DEFAULT_EMPTY_DB_ID (which is __default_empty_db__) and custom template
database using CubicwebTC test_db_id/pre_setup_database API.
When running tests in parallel using multiple processes, build_db_cache() may
try to build the same database twice. Avoid this by adding synchronisation of
process by using a file lock.
So when two processes require the same template database, one build the
database and others wait it to be created.
Use filelock (https://github.com/benediktschmitt/py-filelock) library to have a
portable (unix / windows) way for handling locks.
Also filelock is packaged in debian: https://packages.debian.org/source/python-filelock
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 26 Oct 2018 17:00:05 +0200] rev 12356
Make test database cache lookup concurrent
has_cache() is used to dertermine if the template database already exists or
not.
When running tests accross multiple process, has_cache() wasn't aware of
databases created by other processes because it used a cache to generate the
cache...
Since the discovering discover_cached_db() time is quite reasonable (it's just
about listing file in a directory), let re-generate the cache on cache miss.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Mon, 29 Oct 2018 10:04:31 +0100] rev 12355
Fix flake8 issues since release 3.6.0
Flake8 had a new release which raise new issues, namely:
W504: line break after binary operator
F841: local variable 'ex' is assigned to but never used
W605: invalid escape sequence
F821: undefined name 'buffer' (noqa seems the only way to avoid this false positive)
Also pin flake8>=3.6 in our tests and make explicit that we use python3 to run
flake8 tests.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Mon, 29 Oct 2018 10:09:19 +0100] rev 12354
Stabilize flake8 tests on 3.26 branch
Use basepython=python2 or flake8 installed with python3 will raise "[F821]
undefined name 'buffer'"
Pin flake8 < 3.6 which has new checks that doesn't pass on our current code base.
Laurent Wouters <lwouters@cenotelie.fr> [Tue, 09 Oct 2018 16:24:12 +0200] rev 12353
Fix typo in RDFS URI
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 02 Oct 2018 16:04:52 +0200] rev 12352
[doc] Do not rely on lgc's sphinx_ext
This module is broken (getting an ImportError) and I don't want to fix
it. The only usage we make of it is for the "autodocstring" directive,
and I don't know what it does.
Based on the context, replacing autodocstring with either automodule or
autoclass and removing sphinx_ext from required Sphinx extensions.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 06 Sep 2018 13:44:06 +0200] rev 12351
Added tag 3.26.7 for changeset ee4ad63c91e5
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 06 Sep 2018 13:43:56 +0200] rev 12350
[pkg] Version 3.26.7
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 24 Aug 2018 17:19:02 +0200] rev 12349
Fix possible double import of cubes
For a new-style cube, if we import "cubicweb_<name>" and then import
"cubes.<name>", the cube will be imported twice. cubes.<name> and then
cubicweb_name is ok though...
When using pyramid, we try to find which cube define a "includeme" by importing
them with the name "cubes.<name>", so we (possibly ?) double import all new-style cube.
This case may also occur in tests with PyramidCWTest.
Touching the import loader to fix this scares me, so let's fix this by testing
"cubicweb_<name>" *before* "cubes.name" (for old style cubes, importing
cubicweb_<name> raise ImportError).
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Aug 2018 16:04:39 +0200] rev 12348
[autoform] Make RelationField.fromcardinality a class method factory
Instead of having the "RelationField" class hard-coded in this factory
method (thus preventing any subclass to properly use it), we make that
method a classmethod and instantiate the actual class instead of the
base one.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 22 Aug 2018 16:02:30 +0200] rev 12347
[autoform] Use fieldclass from kwargs in guess_field for non-final relations
This follows up on af969080e7e6 in which a "fieldclass" kwarg has been
added in EntityFieldsForm.field_by_name() before calling guess_field().
In this changeset, this value was only used for final relation but the
way non-final relation actually also changed since we also use
guess_field from these relation (previously, the field class specified
through uicfg was instantiated directly in
EntityFieldsForm.field_by_name()). So in the non-final case in
guess_field() we simply try to retrieve "fieldclass" from kwargs and
fall back to RelationField.
Samuel Trégouët <samuel.tregouet@logilab.fr> [Thu, 16 Aug 2018 12:31:44 +0200] rev 12346
[py37] `async` is now a reserved keyword
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 18 Jul 2018 13:53:00 +0200] rev 12345
Merge 3.26
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 18 Jul 2018 13:48:13 +0200] rev 12344
Added tag 3.26.6, debian/3.26.6-1 for changeset 8362503a9248
Philippe Pepiot <philippe.pepiot@logilab.fr> [Wed, 18 Jul 2018 13:47:45 +0200] rev 12343
[pkg] version 3.26.6
Olivier Giorgis <olivier.giorgis@logilab.fr> [Wed, 18 Jul 2018 11:27:05 +0200] rev 12342
[py3] Replace unicode keyword which is unknown in python3
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 11 Jul 2018 09:18:57 +0200] rev 12341
[skeleton] Use "py3" as tox environment instead of "py34"
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 18:19:08 +0200] rev 12340
Added tag 3.26.5 for changeset 76d7b0aa94d2
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 18:18:33 +0200] rev 12339
[pkg] Version 3.26.5
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Jun 2018 16:49:57 +0200] rev 12338
Merge with 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 12:19:16 +0200] rev 12337
[py3] Use "utf-8" as input encoding for docutils in rest extension
Docutils says that "unicode" is an unknown encoding on Python3. Not sure
where "unicode" as an encoding comes (it's there since showtime) but
"utf-8" seems more appropriate.
From now on, rendering of CubicWeb's rst directive (e.g. ..winclude)
works on Python 3. Accordingly, we extend wdoc's test to demonstrate
this. For this we need to install docutils in tox's web environment.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 11:19:14 +0200] rev 12336
[py3] Avoid setting attribute on Element instance in wdoc view
This change is needed to make "wdoc" view work on Python 3. Indeed,
before this patch, we used to set a "parent" attribute on Element
instances, which is not permitted since Python 3.3 as
xml.etree.ElementTree uses the C implementation by default.
To get rid of this "parent" attribute, we rework the XML nodes
processing logic to return and retrieve a node along with its parent in
several place of the code. Namely, build_toc_index() now accepts the
"parent" value for "node" and inserts it in the "index" dict (thus avoid
`node.parent = <value>`). Respectively, every query to the "index" dict
is updated to also retrieve the "parent" (thus avoiding `<value> =
node.parent`). Later in InlineHelpView class, the "index" dict is bound
to "tocindex" attribute so we adjust how it is queried in respective
methods.
Tests cubicweb/web/test/unittest_views_wdoc.py now pass on Python 3.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 10:07:20 +0200] rev 12335
[test] Add a trivial test for "wdoc" view
We just make sure it gets rendered without errors (which wasn't the case
before the previous patch).
It does not work on Python 3; this will be fixed in next changeset.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 10:06:26 +0200] rev 12334
[py3] Open rst file in text mode in wdoc view
Otherwise, UStringIO complains that it receives bytes.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 11:11:10 +0200] rev 12333
[ext/rest] Drop "handle_io_errors" argument to docutils' FileInput
This argument is deprecated and ignore in docutils since version 0.10.
Besides, its default value is None which is the same as we passed.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 10:38:04 +0200] rev 12332
[wdoc] Remove fallback about xml.etree module
Module xml.etree exists since python 2.5.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 10:15:33 +0200] rev 12331
[wdoc] Avoid usage of deprecated xlm elementree getchildren() method
Use list(node) as suggested by the deprecation warning.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 09:43:23 +0200] rev 12330
[style] Make cubicweb/web/views/wdoc.py flake8-clean
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 28 Jun 2018 09:38:38 +0200] rev 12329
[py3] Use six.text_type instead of unicode in wdoc views
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 28 Jun 2018 10:17:15 +0200] rev 12328
[views/startup] drop a duplicate rql query in manage view
Counting entities in `nb` is already done above this code, regression introduced by a85db6fa
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 19 Jun 2018 09:13:40 +0200] rev 12327
Merge with 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 18 Jun 2018 10:04:08 +0200] rev 12326
Added tag 3.26.4, debian/3.26.4-1 for changeset e1c1af68db86
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 18 Jun 2018 08:58:47 +0200] rev 12325
[pkg] Version 3.26.4
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 15 Jun 2018 17:45:26 +0200] rev 12324
[py3] ensure AjaxController return bytes
publish() must return bytes, when the @ajaxfunc decorated method return None, this raised:
TypeError: You cannot set Response.body to a text object (use Response.text)
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 13 Jun 2018 11:09:17 +0200] rev 12323
[py3] Let InstanceCommand.run_arg() always return an int
The caller of this method (which is method "run_args") does `max(status,
self.run_arg(appid))` and run_arg might return None if the underlying
<cmdname>_instance method returns None. On python3 max(1, None) breaks
with "TypeError: unorderable types: int() > NoneType()". So we enforce
run_arg() method to return an integer even if the underlying method
returns None.
This fixes call of "cubicweb-ctl i18ninstance" with Python3.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 18 Jun 2018 08:47:03 +0200] rev 12322
[test] Use cubicweb-file < 2.0.0
From version 2.0.0, cubicweb-file moved to new-style layout (Python
package) but we still expect it to be an old-style cube in CubicWeb's
tests (WebconfigTC in web/test/unittest_webconfig.py).
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 06 Jun 2018 11:56:15 +0200] rev 12321
[py3] Decode subprocess stdout in toolsutils.show_diffs()
On Python 3, subprocess' pipes are bytes stream so we must decode them
before printing. Without this change, diff of configuration files (e.g.
all-in-one.conf as displayed upon instance upgrade) will rendered as a
single line on Python 3.
Adrien Di Mascio <Adrien.DiMascio@logilab.fr> [Thu, 03 May 2018 16:47:51 +0200] rev 12320
[python3] make sure staticcontroller returns a bytes instance
The ``publish()`` method of controller is supposed to return a
bytes intsance. Returning a text_type instance will crash later
on in the Pyramid response handler when assigning content to
``response.body`` (at least in Python3)::
>>> from pyramid.response import Response
>>> r = Response()
>>> r.body = ''
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/adim/.virtualenvs/…/response.py", line 562, in _body__set
raise TypeError(msg)
TypeError: You cannot set Response.body to a text object (use Response.text)
Adrien Di Mascio <Adrien.DiMascio@logilab.fr> [Thu, 03 May 2018 14:05:26 +0200] rev 12319
[python3] use inspect.getfullargspec instead of inspect.getargspec
The latter is now deprecated
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 15 Jun 2018 17:45:26 +0200] rev 12318
[py3] ensure AjaxController return bytes
publish() must return bytes, when the @ajaxfunc decorated method return None, this raised:
TypeError: You cannot set Response.body to a text object (use Response.text)
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 13 Jun 2018 11:09:17 +0200] rev 12317
[py3] Let InstanceCommand.run_arg() always return an int
The caller of this method (which is method "run_args") does `max(status,
self.run_arg(appid))` and run_arg might return None if the underlying
<cmdname>_instance method returns None. On python3 max(1, None) breaks
with "TypeError: unorderable types: int() > NoneType()". So we enforce
run_arg() method to return an integer even if the underlying method
returns None.
This fixes call of "cubicweb-ctl i18ninstance" with Python3.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Fri, 15 Jun 2018 17:42:50 +0200] rev 12316
Depend on cubicweb-file >= 2.0.0
I applied V1 of the patch, but V2 contained this extra hunk...
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 11 Jun 2018 16:50:38 +0200] rev 12315
[test] Update webconfig's tests accounting for cubicweb-file being now a package
WebconfigTC.test_locate_all_files and WebconfigTC.test_locate_resource
assumed that cubicweb-file was installed in <share>/cubes/file whereas,
from the latest release, it is now a standard Python package thus
installed in site-packages as cubicweb_file. We simply update base
directory of these two tests.
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Wed, 06 Jun 2018 18:54:24 +0200] rev 12314
[widgets.js] fix obvious bug detected by sonar
Nicolas Chauvat <nicolas.chauvat@logilab.fr> [Wed, 06 Jun 2018 18:37:16 +0200] rev 12313
[views/uicfg] obvious bug detected by sonar
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 06 Jun 2018 14:20:16 +0200] rev 12312
[style] Make toolsutils.py flake8-clean
Run `autopep8 --max-line-length 100 -i cubicweb/toolsutils.py` and fixed
unused imports.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 06 Jun 2018 11:56:15 +0200] rev 12311
[py3] Decode subprocess stdout in toolsutils.show_diffs()
On Python 3, subprocess' pipes are bytes stream so we must decode them
before printing. Without this change, diff of configuration files (e.g.
all-in-one.conf as displayed upon instance upgrade) will rendered as a
single line on Python 3.
Adrien Di Mascio <Adrien.DiMascio@logilab.fr> [Thu, 03 May 2018 16:47:51 +0200] rev 12310
[python3] make sure staticcontroller returns a bytes instance
The ``publish()`` method of controller is supposed to return a
bytes intsance. Returning a text_type instance will crash later
on in the Pyramid response handler when assigning content to
``response.body`` (at least in Python3)::
>>> from pyramid.response import Response
>>> r = Response()
>>> r.body = ''
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/adim/.virtualenvs/…/response.py", line 562, in _body__set
raise TypeError(msg)
TypeError: You cannot set Response.body to a text object (use Response.text)
Adrien Di Mascio <Adrien.DiMascio@logilab.fr> [Thu, 03 May 2018 14:05:26 +0200] rev 12309
[python3] use inspect.getfullargspec instead of inspect.getargspec
The latter is now deprecated
Laurent Wouters <lwouters@cenotelie.fr> [Wed, 25 Apr 2018 15:29:25 +0200] rev 12308
[utils] Fixes compatiblity of QueryCache with expected dict interface
QueryCache is expected to mimick the interface of the dict built-in. The current
__iter__ implementation breaks this expectation by iterating over key, value
pairs instead of only the keys.
This changeset fixes this issue by changing the __iter__ implementation to
iterate over the keys in the cache and providing an implementation of the items
method with a contract identical to the dict build-in (return a copy of the key-
value pairs within the dictionary as a list).
David Douard <david.douard@logilab.fr> [Tue, 24 Apr 2018 15:21:18 +0200] rev 12307
[test/statsd] add tests for cubicweb.statsd_logger
Laurent Wouters <lwouters@cenotelie.fr> [Tue, 24 Apr 2018 17:16:44 +0200] rev 12306
[utils] Implements __iter__ on QueryCache
In order to be able to iterate over the currently cached queries (so that they
may be inspected and invalidated), this changeset implementes __iter__ on
QueryCache.
Laurent Wouters <lwouters@cenotelie.fr> [Tue, 24 Apr 2018 17:30:43 +0200] rev 12305
[utils] Added new get method to QueryCache
The new get method enables the retrieval an item in the cache by specifying a
default value so that in the absence of an item for the key, the default value
is returned.
David Douard <david.douard@logilab.fr> [Tue, 24 Apr 2018 15:21:38 +0200] rev 12304
[test/rset] typo
Laurent Wouters <lwouters@cenotelie.fr> [Tue, 24 Apr 2018 11:22:17 +0200] rev 12303
[utils] Fixed issue in clearing QueryCache
When trying to add an item in a full QueryCache, the cache tries to make room.
It tries to list and remove non-permanent items with a transient counter (number
of times it has been requested). However, there is a pathological case where
items could be non-permanent but still not have a transient counter because they
were added, but never requested. In some cases, the full cache could be flushed,
including the permanent items.
This changeset attempts to fix this issue by only dropping the non-permanent
items that did not hav a transient counter.
David Douard <david.douard@logilab.fr> [Mon, 13 Nov 2017 16:08:58 +0100] rev 12302
[statsd] add a statsd_timethis context manager
This context manager allows to report to statsd the execution time of any
piece of code, without the need for it to be a function or a method, like::
def some_function():
do_stuff()
with statsd_timethis('some context message'):
do_that()
ensure_this()
David Douard <david.douard@logilab.fr> [Tue, 24 Apr 2018 14:16:14 +0200] rev 12301
[test/rset] add tests for ResultSet.first() and .last() methods
David Douard <david.douard@logilab.fr> [Tue, 24 Apr 2018 14:04:43 +0200] rev 12300
[test/rset] flake8
David Douard <david.douard@logilab.fr> [Tue, 24 Apr 2018 13:55:20 +0200] rev 12299
[rset] update copyright
David Douard <david.douard@logilab.fr> [Thu, 21 Sep 2017 16:29:26 +0200] rev 12298
[rset] add convenient first() and last() methods on ResultSet
These make life easier for the heavy user of the CW shell.
Also aliases entities() with all(); so we end with a pretty consistant set:
- .one()
- .first()
- .last()
- .all()
Laurent Wouters <lwouters@cenotelie.fr> [Tue, 24 Apr 2018 10:19:42 +0200] rev 12297
[server] Fixed issue with the adapters cache of a cloned EditedEntity
The adapters' cache of the entity within an EditedEntity used to be copied along
the entity itself during a cloning operation of the EditedEntity. This raises
an issue when the adapters' cache is not empty and contains cached values
linking to transaction-specific data (or the transaction itself). This prevents
the clone EditedEntity being used in a transaction outside the one that created
it.
This change resets the adapters' cache of the new copy so that no cached value
remain. The new copy can then be used in a new transaction afterwards.
David Douard <david.douard@logilab.fr> [Thu, 12 Oct 2017 15:22:00 +0200] rev 12296
[rql2sql] fix handling of the ORDERBY clause when the aggregation function is "embedded"
ie. a situation like:
Any X GROUPBY X ORDERBY COUNT(Y) WHERE ...
works fine since the aggregation function (COUNT) if the first one, whereas a situation like the proposed test:
Any X GROUPBY X ORDERBY ABS(COUNT(Y)) WHERE ...
failed due to the fact we only checked the top aggratation function (ABS).
Closes #17108671
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 23 Apr 2018 15:23:55 +0200] rev 12295
Merge 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 23 Apr 2018 13:50:50 +0200] rev 12294
[pkg] Set version to 3.27.0.dev0
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 23 Apr 2018 15:19:19 +0200] rev 12293
Added tag 3.26.3, debian/3.26.3-1 for changeset f7067be5f69c
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 23 Apr 2018 15:17:36 +0200] rev 12292
[pkg] Version 3.26.3
David Douard <david.douard@logilab.fr> [Mon, 16 Oct 2017 12:10:19 +0200] rev 12291
[utils/statsd_logger] flake8
David Douard <david.douard@logilab.fr> [Wed, 13 Dec 2017 01:23:39 +0100] rev 12290
[source/native] do NOT do anything with fti if do_fti is False
ensure no fti related process is done when fti is disabled on a db source.
David Douard <david.douard@logilab.fr> [Thu, 19 Apr 2018 15:55:33 +0200] rev 12289
[test/web] flake8 unittest_propertysheet.py
David Douard <david.douard@logilab.fr> [Thu, 19 Apr 2018 12:47:48 +0200] rev 12288
[web] fix css file generation permission bug (closes #17143773)
PropertySheet.process_resource() uses mkstemp which enforce a 0600 mode on the
output file, which is not the file permission we want for css files.
David Douard <david.douard@logilab.fr> [Thu, 19 Apr 2018 12:45:24 +0200] rev 12287
[test/web] add a test for css generation file permission problem (related to #17143773)
David Douard <david.douard@logilab.fr> [Thu, 19 Apr 2018 15:05:55 +0200] rev 12286
[doc] include the 3.26 changelog in changes's index
Philippe Pepiot <philippe.pepiot@logilab.fr> [Thu, 22 Mar 2018 14:45:11 +0100] rev 12285
[server] set PGPASSWORD when running pg commands for backup and restore
For db-dump (implied by upgrade) and db-restore with postgres with non-trusted
authentication, the db password is asked by pg tools (pg_dump, pg_restore,
createdb, dropdb).
Avoid this behavior by setting the PGPASSWORD environment variable when
database driver is postgres and db-password is set in sources file.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 22 Mar 2018 14:17:40 +0100] rev 12284
Added tag 3.26.2, centos/3.26.2-1, debian/3.26.2-1 for changeset 9bee3134d304
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 22 Mar 2018 13:53:33 +0100] rev 12283
[pkg] Version 3.26.2
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 22 Mar 2018 10:02:59 +0100] rev 12282
Flake8 cubicweb/web/webctl.py
Having the file flake8 clean makes it easier to catch basic programming
errors (e.g. name errors).
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 22 Mar 2018 10:04:54 +0100] rev 12281
[web] Add missing import of _DATA_DIR in webctl
Followup on d84bc85f7f70 which introduced usage of this name in
_datadirs method of GenStaticDataDirMixIn but resulted into a NameError
at runtime and makes migrations crash.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 11:04:20 +0100] rev 12280
[server] unicode → text_type in utils
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 11:02:48 +0100] rev 12279
[views] unicode → six.text_type in views/authentication.py
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 05 Mar 2018 10:32:58 +0100] rev 12278
[pyramid] Recreate CWSession entity when eid no longer exists
As noted in comment, it might occur that we receive a "sessioneid" from
a valid cookie while respective CWSession got dropped (typical case is
db being recreated while users got preserved). In such case, we just
recreate the CWSession entity as if it did not exist.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 22 Feb 2018 16:22:55 +0100] rev 12277
Added tag 3.26.1, debian/3.26.1-1, centos/3.26.1-1 for changeset 027676243aaa
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 22 Feb 2018 16:13:45 +0100] rev 12276
[pkg] Drop non-existant files from MANIFEST.in
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 21 Feb 2018 18:07:24 +0100] rev 12275
[pkg] Version 3.26.1
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 14:20:11 +0100] rev 12274
[test] Drop an unused function in cwconfig tests
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 14:19:15 +0100] rev 12273
[cwconfig] Always use "sys.prefix" to determine installation prefix
We drop all legacy logic implemented in _find_prefix() which now happens
to be buggy since we cleaned up setup.py in 3.26 (noticeably because
virtualenv is no longer properly detected).
Closes #17132990.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 10:55:49 +0100] rev 12272
[cwconfig] Look for migration scripts directory relatively to code
Thus getting rid of the last piece of data in "shared" directory.
As a consequence, we can drop data_files from __pkginfo__.py.
Related to #17132990.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 10:26:55 +0100] rev 12271
[pkg] Get rid of "pydir" in __pkginfo__.py
Nothing uses this.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 10:24:13 +0100] rev 12270
[pkg] Get rid of "shared" data
These are not used anymore per previous changesets.
Related to #17132990.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 10:11:16 +0100] rev 12269
[cwconfig] Drop shared_dir method
There's no more users of this method.
Related to #17132990.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 13:45:06 +0100] rev 12268
[config] Avoid relying on shared_dir method when possible
From 3.26, some "data" directories (like web/data and i18n or wdoc) are
installed along with CubicWeb in site packages. So we can retrieve them
relatively to the module that needs them (namely "cubicweb" for "i18n"
and "cubicweb.web" for "web/data" and "wdoc"). Reason for doing this is
that "share_dir()" is not working when cubicweb is installed in
"develop" mode and we are about to drop this method.
Related to #17132990.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 14:11:18 +0100] rev 12267
[test] Add a test for WebConfiguration.locate_all_files()
We are going to change the implementation, make sure there's no
regression.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 09:35:48 +0100] rev 12266
[cwconfig] Get rid of _forced_mode global
And compute CubicWebNoAppConfiguration.mode within the class namespace.
Related to #17132990.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 09:27:15 +0100] rev 12265
[cwconfig] Get rid of CWDEV
This is in preparation of a fix for #17132990 to cleanup legacy (and
probably no longer working) behaviors.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 15 Feb 2018 09:26:02 +0100] rev 12264
[doc] Set release date of 3.26
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 06 Feb 2018 16:31:49 +0100] rev 12263
[web] Fix UnboundLocalError about "exc" in ajax controller
Introduced in 159dce89a145.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 07 Feb 2018 09:20:32 +0100] rev 12262
Link to "3.26" docs in README
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 01 Feb 2018 09:49:56 +0100] rev 12261
Added tag 3.26.0, debian/3.26.0-1, centos/3.26.0-1 for changeset 199851fcddd4
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 01 Feb 2018 09:24:52 +0100] rev 12260
[pkg] Version 3.26.0
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 25 Jan 2018 12:10:48 +0100] rev 12259
[pkg] Version 3.26.0rc0
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 12 Jan 2018 10:17:10 +0100] rev 12258
[schema] Define a decorator to handle methods override
There is a number of external classes (from yams/rql) methods overridden
"by hand" in cubicweb/schema.py. Define a single decorator to factor out
the pattern. It handles specifying the method name (to avoid conflict
with the local namespace) and passing the original method to the new
definition when needed.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 24 Jan 2018 12:03:21 +0100] rev 12257
[pkg] Use setuptools.find_packages()
We drop the custom get_packages() function in setup.py that used to look
for test files (not discovered automatically since test directories are
not packages) and replace it by explicit entries in MANIFEST.in.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 24 Jan 2018 11:51:23 +0100] rev 12256
[pkg] Drop SandboxViolation verification cracking
Dunno what this is for. Let's see if this work without.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 24 Jan 2018 11:43:13 +0100] rev 12255
[pkg] Drop custom "install_data" command
Not sure what this is for, the comment mentions "egg" directory, but
this is quite likely an old hack that should be unnecessary when using a
recent setuptools.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 24 Jan 2018 11:40:12 +0100] rev 12254
[pkg] Replace custom "scripts" handling by a setuptools entry points
http://setuptools.readthedocs.io/en/latest/setuptools.html#automatic-script-creation
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 24 Jan 2018 13:30:50 +0100] rev 12253
Set a default value for arguments of cubicweb.cwctl:run()
This will help making a console script entry point from this to get rid
of the custom installation of scripts in setup.py.
Accordingly, update all calls of this function.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 24 Jan 2018 11:34:44 +0100] rev 12252
[pkg] Drop custom install_lib command and use include_package_data instead
The custom install_lib command appeared to be meant to install package
data, as declared in __pkginfo__.py. Let's rely on setuptools'
include_package_data[1] option to handle this.
[1]: http://setuptools.readthedocs.io/en/latest/setuptools.html#including-data-files
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 24 Jan 2018 14:45:26 +0100] rev 12251
[py3] Replace a unicode() occurrence in workflow views
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 24 Jan 2018 14:41:01 +0100] rev 12250
[py3] Drop a couple of unicode() in devtools.testlib
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 24 Jan 2018 14:38:39 +0100] rev 12249
[py3] Alias long to int in pgstore tests
The previous version of handling PY2/PY3 made flake8 complain.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 12 Jan 2018 11:02:52 +0100] rev 12248
Merge with 3.25
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 12 Jan 2018 10:56:30 +0100] rev 12247
Added tag 3.25.4, centos/3.25.4-1, debian/3.25.4-1 for changeset b8567725c473
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 12 Jan 2018 10:48:34 +0100] rev 12246
[pkg] Version 3.25.4
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 12 Dec 2017 11:17:25 +0100] rev 12245
[pyramid] Let logging be configured through .ini file
We do not initialize logging in CubicWebPyramidConfiguration thus
preventing logging to be started with cubicweb's configuration. On the
other hand, any logging configuration defined in ``development.ini``
file will be loaded by whatever start the instance using this file (i.e.
pserve, gunicorn, etc.). The benefit is that logging can now be
configured per "qualified name" in this file (i.e. one can easily set
the DEBUG level for the application cube while keeping all dependencies'
level to WARNING). In the development.ini template, we add logger
configurations for "logilab" and "cubicweb" qualified names (along with
those of the application cube).
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 01 Dec 2017 11:19:19 +0100] rev 12244
Disable pytest's logs reporting
CubicWeb already prints captured logs in stderr upon test failure, so we
get them twice. Until we fix our logging management, disabling pytest
capture and restore brings the output level back to sanity.
Denis Laxalde <denis.laxalde@logilab.fr> [Fri, 01 Dec 2017 11:12:09 +0100] rev 12243
[pyramid] Do not issue security warnings in test mode
When some session or authtk secret is missing in Pyramid settings,
scary "!! SECURITY WARNING !!" are issued. This is arguably pointless in
tests. So disable them in this case.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 30 Nov 2017 11:55:35 +0100] rev 12242
[ssplanner] Prevent execution of write queries involving computed relations
Previously, setting a computed relation upon entity creation or
modification (using the ORM or an RQL query) would usually fail with an
operational error in the backend ("no such table"). However, under some
mysterious circumstances (like passing a string as value in cw_set for a
computed relation), the RQL to SQL transformation would simply drop the
clause.
To prevent this to happen, we add a check for computed relation before
adding a relation to an execution plan. This check raises a QueryError.
It happens in several places:
* in querier.InsertPlan.add_relation_def() (called from several places
in ssplanner steps) for INSERT queries,
* in ssplanner.UpdateStep.execute() for SET queries and,
* in ssplanner.SSplanner.build_delete_plan() for DELETE queries.
Tests added to unittest_querier.py because unittest_sslplanner.py looked
inappropriate (it has only unit tests) and the former already had a
NonRegressionTC class.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 30 Nov 2017 11:00:01 +0100] rev 12241
[querier] Expand 'rdef' argument in InsertPlan.add_relation_def()
Expand the 'rdef' tuple to improve readability. The 'rtype' value is not
used at the moment, but will in the next changeset.
Denis Laxalde <denis.laxalde@logilab.fr> [Thu, 30 Nov 2017 11:20:58 +0100] rev 12240
[server] Use dict.setdefault() instead of if/else in repo.glob_add_relations()
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Nov 2017 15:26:32 +0100] rev 12239
[cleanup] Fix some flake8 errors
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Nov 2017 15:26:04 +0100] rev 12238
[test] Stop using lgc.testlib in unittest_migractions
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Nov 2017 16:31:59 +0100] rev 12237
[test] Drop no more used "maxeid" based deletion in BaseQuerierTC and derived tests
This is probably only necessary for QuerierTC itself, move it there and drop
incantation from other derived classes to deactivate this feature.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 15 Sep 2017 16:31:33 +0200] rev 12236
[rql2sql/test] Remove dead setUpModule tearDownModule
they are overwritten a few lines below , hence this code is dead and not
necessary for test success, drop it.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 15 Sep 2017 16:25:51 +0200] rev 12235
[rql2sql/test] Move base class from repotest to unittest_rql2sql
It's only used there, so move it closer to its usage.
Along the way, stop using lgc.testlib.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 15 Sep 2017 16:59:13 +0200] rev 12234
[rql2sql/test] Set maxDiff to None to see full diffs
this is usually useful to compare SQL strings
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 15 Sep 2017 17:01:04 +0200] rev 12233
[rql2sql] Use string_type instead of unicode for py3k support
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Nov 2017 17:08:05 +0100] rev 12232
[gcdebug] Only ignore weakref.WeakKeyDictionary class on Python 2
From Python 3.5, this class fails isinstance check with the following
error:
::
cls = <class 'weakref.WeakKeyDictionary'>, instance = <functools._lru_list_elem object at 0x7f4331859a48>
def __instancecheck__(cls, instance):
"""Override for isinstance(instance, cls)."""
# Inline the cache checking
> subclass = instance.__class__
E AssertionError: [<class 'AttributeError'> in gc] 'functools._lru_list_elem' object has no attribute '__class__'
/usr/lib/python3.5/abc.py:181: AssertionError
I have no clue why this happens, but it makes
cubicweb.web.test.test_views.AutomaticWebTest.test_startup_views fail on
Python 3.5. So only consider this class for Python 2.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Nov 2017 16:14:57 +0100] rev 12231
[wsgi] Convert "code" passed to WSGIResponse as integer
WSGIResponse is passed a Request.status_out in
CubicWebWSGIApplication._render(), which, starting from Python 3.5, is
an instance of HTTPStatus.
However, webtest still expects a 3-digits value as status string.
Fortunately, calling int() on an HTTPStatus works.
Denis Laxalde <denis.laxalde@logilab.fr> [Wed, 29 Nov 2017 15:50:07 +0100] rev 12230
[test] Add a "version" to cubicweb_mycube/__pkginfo__.py
Starting from Python 3.5, unittest_cwctl.py::CubicWebCtlTC.test_list()
would fail without this.
Denis Laxalde <denis.laxalde@logilab.fr> [Tue, 28 Nov 2017 15:43:55 +0100] rev 12229
[tox] Use py3 environment instead of py34
The former would select any Python 3 interpreter.
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Nov 2017 15:02:03 +0100] rev 12228
[querier] Allow usage of computed relation into WHERE clause of write queries
This used to crash because of an attempt to access unexisting table.
Closes #17113286
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 03 Nov 2017 12:27:51 +0100] rev 12227
[cleanup] Fix some flake8 errors
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Oct 2017 09:37:20 +0100] rev 12226
[tox] Bump flake8 version to 3.5
Previous patches fixed new errors raised in this version.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Oct 2017 09:32:26 +0100] rev 12225
[pyramid] Get rid of a couple of bare "except"
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Oct 2017 09:28:52 +0100] rev 12224
[pyramid] Get rid of a bare "except" in UpdateLoginTimeAuthenticationPolicy
Also refactor a bit the method to restrict the try/except block to the
code for which we actually want to catch an exception (i.e. the
cnx.execute() + cnx.commit()).
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Oct 2017 09:25:22 +0100] rev 12223
[web] Avoid bare "except" in ConcatFilesHandler.concat_cached_filepath()
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Oct 2017 09:16:07 +0100] rev 12222
[test] Use ignore_errors=True in shutil.rmtree instead of try/except/pass
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Oct 2017 09:13:02 +0100] rev 12221
[server] Get rid of a bare except in sqlutils
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Oct 2017 09:14:36 +0100] rev 12220
[server] Do not use logilab.common.date.strptime in sqlutils
This function is aliased to datetime.datetime.strptime() and exists only
for compatibility with Python <= 2.5 which we no longer support.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Oct 2017 09:08:35 +0100] rev 12219
[dataimport/test] Ignore flake8 error E741 in test_pgstore.py
This error is about "l" being an ambiguous variable name. Here, it's
arguably acceptable.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Oct 2017 09:18:20 +0100] rev 12218
[test] Avoid ambiguous variable name "l" in unittest_req.py
This is an error (E741) from flake8 3.5.
Denis Laxalde <denis.laxalde@logilab.fr> [Mon, 30 Oct 2017 09:04:34 +0100] rev 12217
[tox] Bound flake8 version to >=3.4, <3.5
The code base is not clean with 3.5, so keep using 3.4 in *stable*
branches.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 24 Oct 2017 09:50:29 +0200] rev 12216
[pyramid] set waitress url_scheme to https when base-url scheme is https
See https://docs.pylonsproject.org/projects/waitress/en/latest/#using-behind-a-reverse-proxy
Since we do not configure trusted_proxy waitress ignore X-Forwarded-Proto
header and may generate http urls (pyramid request.url) when the instance is
behind a https reverse proxy. This cause cubicweb-signredrequest to not work
with since it rely on the url (including scheme).
Set url_scheme to 'https' when CubicWeb base-url scheme is https as a
workaround.
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 17 Oct 2017 11:59:55 +0200] rev 12215
Added tag 3.25.3, centos/3.25.3-1, debian/3.25.3-1 for changeset d238badfc268
Philippe Pepiot <philippe.pepiot@logilab.fr> [Tue, 17 Oct 2017 11:58:35 +0200] rev 12214
[pkg] version 3.25.3
Sylvain Thénault <sylvain.thenault@logilab.fr> [Fri, 06 Oct 2017 15:14:18 +0200] rev 12213
[uicfg] Fix autoform_section rtags wrt derivation
cw 3.25 introduced the 'derived rtags' feature, but missed that
`autoform_section` implementation was overriding several methods where this was
implemented in the base class. The following problems are tested and fixed:
* during init, we should not attempt to call `_initfunc_step2` if there is some
parent,
* but we should handle expansion of wildcard ('*' used as subject or object of a
tag) since this is handled during init step for this class, unlike others
which handle this in `get` method (i.e. at lookup time),
* fix overrided `get` method to consider parent rtag if any.
Closes #17107020